Add a command line option (-l) that lists all the tests. The number
before the test will be used in the next commit for specifying a
single test to run. Here is an example of the output:
Tests:
0: SEND_RECEIVE
1: SEND_RECEIVE_2K_FRAME
2: SEND_RECEIVE_SINGLE_PKT
3: POLL_RX
4: POLL_TX
5: POLL_RXQ_FULL
6: POLL_TXQ_FULL
7: SEND_RECEIVE_UNALIGNED
:
:
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, when running ZC test suite, after finishing first run of test
suite and then switching to busy-poll tests within xskxceiver, such
errors are observed:
libbpf: Kernel error message: ice: MTU is too large for linear frames and XDP prog does not support frags
1..26
libbpf: Kernel error message: Native and generic XDP can't be active at the same time
Error attaching XDP program
not ok 1 [xskxceiver.c:xsk_reattach_xdp:1568]: ERROR: 17/"File exists"
this is because test suite ends with 9k MTU and native xdp program being
loaded. Busy-poll tests start non-multi-buffer tests for generic mode.
To fix this, let us introduce bash function that will reset NIC settings
to default (e.g. 1500 MTU and no xdp progs loaded) so that test suite
can continue without interrupts. It also means that after busy-poll
tests NIC will have those default settings, whereas right now it is left
with 9k MTU and xdp prog loaded in native mode.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-25-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove the namespaces used as they fill no function. This will
simplify the code for speeding up the tests in the following commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recently, xsk part of libbpf was moved to selftests/bpf directory and
lives on its own because there is an AF_XDP testing application that
needs it called xdpxceiver. That name makes it a bit hard to indicate
who maintains it as there are other XDP samples in there, whereas this
one is strictly about AF_XDP.
Do s/xdpxceiver/xskxceiver so that it will be easier to figure out who
maintains it. A follow-up patch will correct MAINTAINERS file.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220707111613.49031-2-maciej.fijalkowski@intel.com
Fix the reporting of failed tests as it was broken in several
ways. First, a failed test was reported as both failed and passed
messing up the count. Second, tests were not aborted after a failure
and could generate more "failures" messing up the count even
more. Third, the failure reporting from the application to the shell
script was wrong. It always reported pass. And finally, the handling
of the failures in the launch script was not correct.
Correct all this by propagating the failure up through the function
calls to a calling function that can abort the test. A receiver or
sender thread will mark the new variable in the test spec called fail,
if a test has failed. This is then picked up by the main thread when
everyone else has exited and this is then marked and propagated up to
the calling script.
Also add a summary function in the calling script so that a user
does not have to go through the sub tests to see if something has
failed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Execute all xsk selftests for busy-poll mode too. Currently they were
only run for the standard interrupt driven softirq mode. Replace the
unused option queue-id with the new option busy-poll.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove the spec-file that is not used any longer from the shell
scripts. Also remove an unused option.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove the number of tx packet option as this should be decided by the
test itself. Also change the number of packets to be sent to 4096
speeding up the execution.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-3-magnus.karlsson@gmail.com
Remove color mode since it does not add any value and having less code
means less maintenance which is a good thing.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-2-magnus.karlsson@gmail.com
Prior to this commit individual xsk tests were launched from the
shell script 'test_xsk.sh'. When adding a new test type, two new test
configurations had to be added to this file - one for each of the
supported XDP 'modes' (skb or drv). Should zero copy support be added to
the xsk selftest framework in the future, three new test configurations
would need to be added for each new test type. Each new test type also
typically requires new CLI arguments for the xdpxceiver program.
This commit aims to reduce the overhead of adding new tests, by launching
the test configurations from within the xdpxceiver program itself, using
simple loops. Every test is run every time the C program is executed. Many
of the CLI arguments can be removed as a result.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210223162304.7450-4-ciara.loftus@intel.com
Launching xdpxceiver with -D enables what was formerly know as 'debug'
mode. Rename this mode to 'dump-pkts' as it better describes the
behavior enabled by the option. New usage:
./xdpxceiver .. -D
or
./xdpxceiver .. --dump-pkts
Also make it possible to pass this flag to the app via the test_xsk.sh
shell script like so:
./test_xsk.sh -D
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210223162304.7450-3-ciara.loftus@intel.com
Make the xsk tests less verbose by only printing the
essentials. Currently, it is hard to see if the tests passed or not
due to all the printouts. Move the extra printouts to a verbose
option, if further debugging is needed when a problem arises.
To run the xsk tests with verbose output:
./test_xsk.sh -v
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210223162304.7450-2-ciara.loftus@intel.com
Adds following tests:
1. AF_XDP SKB mode
Generic mode XDP is driver independent, used when the driver does
not have support for XDP. Works on any netdevice using sockets and
generic XDP path. XDP hook from netif_receive_skb().
a. nopoll - soft-irq processing
b. poll - using poll() syscall
Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Yonghong Song <yhs@fb.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20201207215333.11586-3-weqaar.a.janjua@intel.com
This patch adds AF_XDP selftests framework under selftests/bpf.
Topology:
---------
----------- -----------
| xskX | --------- | xskY |
----------- | -----------
| | |
----------- | ----------
| vethX | --------- | vethY |
----------- peer ----------
| | |
namespaceX | namespaceY
Prerequisites setup by script test_xsk.sh:
Set up veth interfaces as per the topology shown ^^:
* setup two veth interfaces and one namespace
** veth<xxxx> in root namespace
** veth<yyyy> in af_xdp<xxxx> namespace
** namespace af_xdp<xxxx>
* create a spec file veth.spec that includes this run-time configuration
*** xxxx and yyyy are randomly generated 4 digit numbers used to avoid
conflict with any existing interface
* tests the veth and xsk layers of the topology
Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Yonghong Song <yhs@fb.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20201207215333.11586-2-weqaar.a.janjua@intel.com
