[ Upstream commit 382e6e177b ]
The arm64 entry code suffers from an annoying issue on taking
a NMI, as it sets PMR to a value that actually allows IRQs
to be acknowledged. This is done for consistency with other parts
of the code, and is in the process of being fixed. This shouldn't
be a problem, as we are not enabling interrupts whilst in NMI
context.
However, in the infortunate scenario that we took a spurious NMI
(retired before the read of IAR) *and* that there is an IRQ pending
at the same time, we'll ack the IRQ in NMI context. Too bad.
In order to avoid deadlocks while running something like perf,
teach the GICv3 driver about this situation: if we were in
a context where no interrupt should have fired, transiently
set PMR to a value that only allows NMIs before acking the pending
interrupt, and restore the original value after that.
This papers over the core issue for the time being, and makes
NMIs great again. Sort of.
Fixes: 4d6a38da8e ("arm64: entry: always set GIC_PRIO_PSR_I_SET during entry")
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/lkml/20210610145731.1350460-1-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e13d96670 ]
When building with extra warnings enabled, clang points out a
mistake in the error handling:
drivers/irqchip/irq-gic-v3-mbi.c:306:21: error: result of comparison of constant 18446744073709551615 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (mbi_phys_base == OF_BAD_ADDR) {
Truncate the constant to the same type as the variable it gets compared
to, to shut make the check work and void the warning.
Fixes: 505287525c ("irqchip/gic-v3: Add support for Message Based Interrupts as an MSI controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210323131842.2773094-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fbecd2389 ]
Add support for the interrupt controller found in the JZ4760 SoC, which
works exactly like the one in the JZ4770.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210307172014.73481-2-paul@crapouillou.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c1f664d240 upstream.
Currently we use bitmap_alloc() to allocate msi bitmap which should be
initialized with zero. This is obviously wrong but it works because msi
can fallback to legacy interrupt mode. So use bitmap_zalloc() instead.
Fixes: 632dcc2c75 ("irqchip: Add Loongson PCH MSI controller")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210209071051.2078435-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a890caeb2b ]
Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of IMX_INTMUX to ARCH_MXC,
and ask the user in case of compile-testing.
Fixes: 66968d7dfc ("irqchip: Add COMPILE_TEST support for IMX_INTMUX")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210208145605.422943-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 599b3063ad upstream.
Since commit 5556797662 ("genirq/irqdomain: Allow partial trimming of
irq_data hierarchy") the irq_data chain is valided.
The irq_domain_trim_hierarchy() function doesn't consider the irq + ipi
domain hierarchy as valid, since the ipi domain has the irq domain set
as parent, but the parent domain has no chip set. Hence the boot ends in
a kernel panic.
Set the chip for the parent domain as it is done in the mips gic irq
driver, to have a valid irq_data chain.
Fixes: 3838a547fd ("irqchip: mips-cpu: Introduce IPI IRQ domain support")
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210107213603.1637781-1-dev@kresin.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f5fbc4305 ]
We have a problem if we use gpio-keys and configure wakeups such that
we only want one edge to wake us up. AKA:
wakeup-event-action = <EV_ACT_DEASSERTED>;
wakeup-source;
Specifically we end up with a phantom interrupt that blocks suspend if
the line was already high and we want wakeups on rising edges (AKA we
want the GPIO to go low and then high again before we wake up). The
opposite is also problematic.
Specifically, here's what's happening today:
1. Normally, gpio-keys configures to look for both edges. Due to the
current workaround introduced in commit c3c0c2e18d ("pinctrl:
qcom: Handle broken/missing PDC dual edge IRQs on sc7180"), if the
line was high we'd configure for falling edges.
2. At suspend time, we change to look for rising edges.
3. After qcom_pdc_gic_set_type() runs, we get a phantom interrupt.
We can solve this by just clearing the phantom interrupt.
NOTE: it is possible that this could cause problems for a client with
very specific needs, but there's not much we can do with this
hardware. As an example, let's say the interrupt signal is currently
high and the client is looking for falling edges. The client now
changes to look for rising edges. The client could possibly expect
that if the line has a short pulse low (and back high) that it would
always be detected. Specifically no matter when the pulse happened,
it should either have tripped the (old) falling edge trigger or the
(new) rising edge trigger. We will simply not trip it. We could
narrow down the race a bit by polling our parent before changing
types, but no matter what we do there will still be a period of time
where we can't tell the difference between a real transition (or more
than one transition) and the phantom.
Fixes: f55c73aef8 ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201211141514.v4.1.I2702919afc253e2a451bebc3b701b462b2d22344@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc6c7cd387 ]
ti_sci_intr_irq_domain_free() assumes that out_irq of intr is stored in
data->chip_data and uses it for calling ti_sci irq_free() and then
mark the out_irq as available resource. But ti_sci_intr_irq_domain_alloc()
is storing p_hwirq(parent's hardware irq) which is translated from out_irq.
This is causing resource leakage and eventually out_irq resources might
be exhausted. Fix ti_sci_intr_irq_domain_alloc() by storing the out_irq
in data->chip_data.
Fixes: a5b659bd4b ("irqchip/ti-sci-intr: Add support for INTR being a parent to INTR")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201102120631.11165-1-lokeshvutla@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b10d5fd489 ]
On a successful probe, the driver tries to print a success message with
INTA device id. It uses pdev->id for printing the id but id is stored in
inta->ti_sci_id. Fix it by correcting the dev_info parameter.
Fixes: 5c4b585d29 ("irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201102120614.11109-1-lokeshvutla@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3841245e84 ]
The alpine-msi driver has an interesting allocation error handling,
where it frees the same interrupts repeatedly. Hilarity follows.
This code is probably never executed, but let's fix it nonetheless.
Fixes: e6b78f2c3e ("irqchip: Add the Alpine MSIX interrupt controller")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Cc: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Cc: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201129135525.396671-1-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
- Fix Exiu driver trigger type when using ACPI
- Fix GICv3 ITS suspend/resume to use the in-kernel path
at all times, sidestepping braindead firmware support
-----BEGIN PGP SIGNATURE-----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=IjDX
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix Exiu driver trigger type when using ACPI
- Fix GICv3 ITS suspend/resume to use the in-kernel path
at all times, sidestepping braindead firmware support
Link: https://lore.kernel.org/r/20201122184752.553990-1-maz@kernel.org
On systems without HW-based collections (i.e. anything except GIC-500),
we rely on firmware to perform the ITS save/restore. This doesn't
really work, as although FW can properly save everything, it cannot
fully restore the state of the command queue (the read-side is reset
to the head of the queue). This results in the ITS consuming previously
processed commands, potentially corrupting the state.
Instead, let's always save the ITS state on suspend, disabling it in the
process, and restore the full state on resume. This saves us from broken
FW as long as it doesn't enable the ITS by itself (for which we can't do
anything).
This amounts to simply dropping the ITS_FLAGS_SAVE_SUSPEND_STATE.
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
[maz: added warning on resume, rewrote commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201107104226.14282-1-xuqiang36@huawei.com
Since fwspec->param_count of ACPI node is two, the index of IRQ type
in fwspec->param[] should be 1 rather than 2.
Fixes: 3d090a36c8 ("irqchip/exiu: Implement ACPI support")
Signed-off-by: Chen Baozi <chenbaozi@phytium.com.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20201117032015.11805-1-cbz@baozis.org
Cc: stable@vger.kernel.org
- Fix the fallout of the IPI as interrupt conversion in Kconfig and the
BCM2836 interrupt chip driver/
- Fixes for interrupt affinity setting and the handling of hierarchical
irq domains in the SiFive PLIC driver.
- Make the unmapped event handling in the TI SCI driver work correctly.
- A few minor fixes and cleanups in various chip drivers and Kconfig.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+oCiATHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoUIkEAC9wYn4x5fObSRpamwj0lagGkUsd0dB
JmKW+u/oUkhM1ZosqPegslA6RDc7LitONFcnqBD348JBrxyP94OnskhBWITv9Nx1
p4AkLS7HDs0pgOpam66qJdxAmLZ0F0vOPnEgr2VQWqaRV8qlTESNiCxT2wKF7mRd
qJn5pW3kSJnyfA66cpFVC3Db64KmdWQvv0BCnc1Wqq3odXgOuTvOkqzVrlqJZQ59
RrZudU0Lz9FtUujQ7AuP+RZY7Ti/AjmEaZDvcsnz3SR6vZGV8qG1f/88RP31d4qK
62cIOfz/bsl1uxAwnKGM4U84tzYua6djhRZXInlzL4/iYKlm5qVR8Qpotl7IxT5n
ntMJGhu/Evy987mq1maOR2rWyqVNU5BoVJUeHHibP8LANTKf7sdWOaNqieXQRKYS
ZnTmoRImBOFhxi0BuqKwwHqJILC4yOZpOa+ARMPqns2KzA4jpAvN+MwPWwpsBVaD
giVm8e8CQvFgMQjjRHcOkfernSsQs/fyQSYQY9qJI/IzVqTEFcYUONneelJGFB7R
iDFMURx7aQUPNf8p9c7eEx0BSBUBan+Quul4HQ1I+SnmOZg3QgRvlMm/zPxhnfyU
3NV4oi4c/fG+7ex+tR3igcfYPCK35BP+6iDG+GKTBjAHimQqk9XXsDYN/Wh3nW6f
UnsJIs9zdhPJsA==
=HUPi
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Fix the fallout of the IPI as interrupt conversion in Kconfig and
the BCM2836 interrupt chip driver
- Fixes for interrupt affinity setting and the handling of
hierarchical irq domains in the SiFive PLIC driver
- Make the unmapped event handling in the TI SCI driver work
correctly
- A few minor fixes and cleanups in various chip drivers and Kconfig"
* tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events
irqchip/ti-sci-inta: Add support for unmapped event handling
dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling
irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm
irqchip/sifive-plic: Fix chip_data access within a hierarchy
irqchip/sifive-plic: Fix broken irq_set_affinity() callback
irqchip/stm32-exti: Add all LP timer exti direct events support
irqchip/bcm2836: Fix missing __init annotation
irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY
irqchip/mst: Make mst_intc_of_init static
irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7
genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY
The DMA (BCDMA/PKTDMA and their rings/flows) events are under the INTA's
supervision as unmapped events in AM64.
In order to keep the current SW stack working, the INTA driver must replace
the dev_id with it's own when a request comes for BCDMA or PKTDMA
resources.
Implement parsing of the optional "ti,unmapped-event-sources" phandle array
to get the sci-dev-ids of the devices where the unmapped events originate.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201020073243.19255-3-peter.ujfalusi@ti.com
Get rid of the separate flag to indicate if the IRLM bit is present in
the INTC/Interrupt Control Register 0, by considering -1 an invalid
irlm_bit value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201028153955.1736767-1-geert+renesas@glider.be
The plic driver crashes in plic_irq_unmask() when the interrupt is within a
hierarchy, as it picks the top-level chip_data instead of its local one.
Using irq_data_get_irq_chip_data() instead of irq_get_chip_data() solves
the issue for good.
Fixes: f1ad1133b1 ("irqchip/sifive-plic: Add support for multiple PLICs")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
[maz: rewrote commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20201029023738.127472-1-greentime.hu@sifive.com
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An interrupt submitted to an affinity change will always be left enabled
after plic_set_affinity() has been called, while the expectation is that
it should stay in whatever state it was before the call.
Preserving the configuration fixes a PWM hang issue on the Unleashed
board.
[ 919.015783] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 919.020922] rcu: 0-...0: (0 ticks this GP)
idle=7d2/1/0x4000000000000002 softirq=1424/1424 fqs=105807
[ 919.030295] (detected by 1, t=225825 jiffies, g=1561, q=3496)
[ 919.036109] Task dump for CPU 0:
[ 919.039321] kworker/0:1 R running task 0 30 2 0x00000008
[ 919.046359] Workqueue: events set_brightness_delayed
[ 919.051302] Call Trace:
[ 919.053738] [<ffffffe000930d92>] __schedule+0x194/0x4de
[ 982.035783] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 982.040923] rcu: 0-...0: (0 ticks this GP)
idle=7d2/1/0x4000000000000002 softirq=1424/1424 fqs=113325
[ 982.050294] (detected by 1, t=241580 jiffies, g=1561, q=3509)
[ 982.056108] Task dump for CPU 0:
[ 982.059321] kworker/0:1 R running task 0 30 2 0x00000008
[ 982.066359] Workqueue: events set_brightness_delayed
[ 982.071302] Call Trace:
[ 982.073739] [<ffffffe000930d92>] __schedule+0x194/0x4de
[..]
Fixes: bb0fed1c60 ("irqchip/sifive-plic: Switch to fasteoi flow")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
[maz: tidy-up commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20201020081532.2377-1-greentime.hu@sifive.com
bcm2836_arm_irqchip_smp_init() calls set_smp_ipi_range(), which has
an __init annotation. Make sure the caller has the same annotation.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
SoC changes, a substantial part of this is cleanup of some of the older
platforms that used to have a bunch of board files. In particular:
- Removal of non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP platforms,
moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
THere are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones re:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP
-----BEGIN PGP SIGNATURE-----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=0+Ee
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
Now that GENERIC_IRQ_IPI selects IRQ_DOMAIN_HIERARCHY, there is no
need to have this conditional select for IRQ_MIPS_CPU. Similarily,
MIPS_GIC only needs selecting GENERIC_IRQ_IPI.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
mst_intc_of_init has no external caller, so let's make it static.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The MStar interrupt controller is only found on MStar, SigmaStar, and
Mediatek SoCs. Hence add dependencies on ARCH_MEDIATEK and
ARCH_MSTARV7, to prevent asking the user about the MStar interrupt
controller driver when configuring a kernel without support for MStar,
SigmaStar, and Mediatek SoCs.
Fixes: ad4c938c92 ("irqchip/irq-mst: Add MStar interrupt controller support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20201014131703.18021-1-geert+renesas@glider.be
- Add support for generic initiator-only proximity domains to
the ACPI NUMA code and the architectures using it (Jonathan
Cameron).
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo).
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada).
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
* Add predefined names from the SMBus sepcification (Bob Moore).
* Update acpi_help UUID list (Bob Moore).
* Return exceptions for string-to-integer conversions in iASL (Bob
Moore).
* Add a new "ALL <NameSeg>" debugger command (Bob Moore).
* Add support for 64 bit risc-v compilation (Colin Ian King).
* Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap).
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung).
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko).
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo).
- Add missing config_item_put() to fix refcount leak (Hanjun Guo).
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo).
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings).
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov).
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao).
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing).
- Serialize tools/power/acpi Makefile (Thomas Renninger).
-----BEGIN PGP SIGNATURE-----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=feLU
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
Iteration over memblock.reserved with for_each_reserved_mem_region() used
__next_reserved_mem_region() that implemented a subset of
__next_mem_region().
Use __for_each_mem_range() and, essentially, __next_mem_region() with
appropriate parameters to reduce code duplication.
While on it, rename for_each_reserved_mem_region() to
for_each_reserved_mem_range() for consistency.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-17-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kexec can directly boot into a new kernel without going to complete
reboot. This can leave the previous kernel's configuration for PDC
interrupts as is.
Clear previous kernel's configuration during init by setting interrupts
in enable bank to zero. The IRQs specified in qcom,pdc-ranges property
are the only ones that can be used by the new kernel so clear only those
IRQs. The remaining ones may be in use by a different kernel and should
not be set by new kernel.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/1601267524-20199-7-git-send-email-mkshah@codeaurora.org
Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag to enable/unmask the
wakeirqs during suspend entry.
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/1601267524-20199-6-git-send-email-mkshah@codeaurora.org
This interrupt controller is found in the Actions Semi Owl SoCs (S500,
S700 and S900) and provides support for handling up to 3 external
interrupt lines.
Each line can be independently configured as interrupt and triggers on
either of the edges or either of the levels. Additionally, each line
can also be masked individually.
Co-developed-by: Parthiban Nallathambi <pn@denx.de>
Co-developed-by: Saravanan Sekar <sravanhome@gmail.com>
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1a010ef0eb78831b5657d74a0fcdef7a8efb2ec4.1600114378.git.cristian.ciocaltea@gmail.com
Add support to use dw-apb-ictl as primary interrupt controller.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[maz: minor fixups]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Haoyu Lv <lvhaoyu@huawei.com>
Link: https://lore.kernel.org/r/20200924071754.4509-4-thunder.leizhen@huawei.com
Add the required abstractions that will help introducing hierarchical
domain support to the dw-apb-ictl driver.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[maz: commit message, some cleanups]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Haoyu Lv <lvhaoyu@huawei.com>
Link: https://lore.kernel.org/r/20200924071754.4509-3-thunder.leizhen@huawei.com
Note this crash is present before any of the patches in this series, but
as explained below it is highly unlikely anyone is shipping a firmware that
causes it. Tests were done using an overriden SRAT.
On ARM64, the gic-v3 driver directly parses SRAT to locate GIC Interrupt
Translation Service (ITS) Affinity Structures. This is done much later
in the boot than the parses of SRAT which identify proximity domains.
As a result, an ITS placed in a proximity domain that is not defined by
another SRAT structure will result in a NUMA node that is not completely
configured and a crash.
ITS [mem 0x202100000-0x20211ffff]
ITS@0x0000000202100000: Using ITS number 0
Unable to handle kernel paging request at virtual address 0000000000001a08
...
Call trace:
__alloc_pages_nodemask+0xe8/0x338
alloc_pages_node.constprop.0+0x34/0x40
its_probe_one+0x2f8/0xb18
gic_acpi_parse_madt_its+0x108/0x150
acpi_table_parse_entries_array+0x17c/0x264
acpi_table_parse_entries+0x48/0x6c
acpi_table_parse_madt+0x30/0x3c
its_init+0x1c4/0x644
gic_init_bases+0x4b8/0x4ec
gic_acpi_init+0x134/0x264
acpi_match_madt+0x4c/0x84
acpi_table_parse_entries_array+0x17c/0x264
acpi_table_parse_entries+0x48/0x6c
acpi_table_parse_madt+0x30/0x3c
__acpi_probe_device_table+0x8c/0xe8
irqchip_init+0x3c/0x48
init_IRQ+0xcc/0x100
start_kernel+0x33c/0x548
ACPI 6.3 allows any set of Affinity Structures in SRAT to define a proximity
domain. However, as we do not see this crash, we can conclude that no
firmware is currently placing an ITS in a node that is separate from
those containing memory and / or processors.
We could modify the SRAT parsing behavior to identify the existence
of Proximity Domains unique to the ITS structures, and handle them as
a special case of a generic initiator (once support for those merges).
This patch avoids the complexity that would be needed to handle this corner
case, by not allowing the ITS entry parsing code to instantiate new NUMA
Nodes. If one is encountered that does not already exist, then NO_NUMA_NODE
is assigned and a warning printed just as if the value had been greater than
allowed NUMA Nodes.
"SRAT: Invalid NUMA node -1 in ITS affinity"
Whilst this does not provide the full flexibility allowed by ACPI,
it does fix the problem. We can revisit a more sophisticated solution if
needed by future platforms.
Change is simply to replace acpi_map_pxm_to_node with pxm_to_node reflecting
the fact a new mapping is not created.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce a static key identifying Samsung's unique creation, allowing
to replace the indirect call to compute the base addresses with
a simple test on the static key.
Faster, cheaper, negative diffstat.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Although it doesn't seem possible to disable individual mailbox
interrupts, we still need to provide some callbacks.
Fixes: 09eb672ce4fb ("irqchip/bcm2836: Configure mailbox interrupts as standard interrupts")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
To introduce IPIs as standard interrupts to the Armada 370-XP
driver, let's allocate a completely separate irqdomain and
irqchip combo that lives parallel to the "standard" one.
This effectively should be modelled as a chained interrupt
controller, but the code is in such a state that it is
pretty hard to shoehorn, as it would require the rewrite
of the MSI layer as well.
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to switch the hip04 driver to provide standard interrupts
for IPIs, rework the way interrupts are allocated, making sure
the irqdomain covers the SGIs as well as the rest of the interrupt
range.
The driver is otherwise so old-school that it creates all interrupts
upfront (duh!), so there is hardly anything else to change, apart
from communicating the IPIs to the arch code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to switch the bcm2836 driver to privide standard interrupts
for IPIs, it first needs to stop lying about the way things work.
The mailbox interrupt is actually a multiplexer, with enough
bits to store 32 pending interrupts per CPU. So let's turn it
into a chained irqchip.
Once this is done, we can instanciate the corresponding IPIs,
and pass them to the architecture code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
