Commit 89fec128d5 ("hwmon: (npcm750-pwm-fan) Add NPCM8xx support")
introduced support for PWM fans on Nuvoton's npcm845 SoC. This chip
supports three PWM modules with four PWM channels each. The older npcm750
only supported two PWM modules. The commit did not take into account that
the older SoC only supported two PWM modules. This results in a crash if
npcm750 is instantiated when the code attempts to instantiate the
non-existing third PWM module.
Unable to handle kernel paging request at virtual address e0aa2000 when write
[e0aa2000] *pgd=04ab6811, *pte=00000000, *ppte=00000000
Internal error: Oops: 807 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G N 6.7.0-next-20240112-dirty #3
Hardware name: NPCM7XX Chip family
PC is at npcm7xx_pwm_fan_probe+0x204/0x890
LR is at arm_heavy_mb+0x1c/0x38
Fix the problem by detecting the number of supported PWM modules in the
probe function and only instantiating the supported modules.
Fixes: 89fec128d5 ("hwmon: (npcm750-pwm-fan) Add NPCM8xx support")
Cc: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This contains a bunch of cleanups and simplifications across the board,
as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due to
other responsibilities I have lately not been able to find the time that
the subsystem deserves and Uwe, who has been helping out a lot for the
past few years and has many things planned for the future, has kindly
volunteered to take over. I have no doubt that he will be a suitable
replacement.
-----BEGIN PGP SIGNATURE-----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=pIh8
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a bunch of cleanups and simplifications across the
board, as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due
to other responsibilities I have lately not been able to find the time
that the subsystem deserves and Uwe, who has been helping out a lot
for the past few years and has many things planned for the future, has
kindly volunteered to take over. I have no doubt that he will be a
suitable replacement"
* tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
MAINTAINERS: pwm: Thierry steps down, Uwe takes over
pwm: linux/pwm.h: fix Excess kernel-doc description warning
pwm: Add pwm_apply_state() compatibility stub
pwm: cros-ec: Drop documentation for dropped struct member
pwm: Drop two unused API functions
pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs
pwm: meson: Simplify using dev_err_probe()
pwm: stmpe: Silence duplicate error messages
pwm: Reduce number of pointer dereferences in pwm_device_request()
pwm: crc: Use consistent variable naming for driver data
pwm: omap-dmtimer: Drop locking
dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml
media: pwm-ir-tx: Trigger edges from hrtimer interrupt context
pwm: bcm2835: Allow PWM driver to be used in atomic context
pwm: Make it possible to apply PWM changes in atomic context
pwm: renesas: Remove unused include
pwm: Replace ENOTSUPP with EOPNOTSUPP
pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()
pwm: Stop referencing pwm->chip
pwm: Update kernel doc for struct pwm_chip
...
Through hidraw, userspace can cause a status report to be sent
from the device. The parsing in waterforce_raw_event() may happen in
parallel to a waterforce_get_status() call (which resets the completion
for tracking the report) if it's running on a different CPU where
bottom half interrupts are not disabled.
Add a spinlock around the complete_all() call in waterforce_raw_event()
to prevent race issues.
Fixes: d5939a793693 ("hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20231219143620.22179-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
as6200 is a temperature sensor with 0.0625°C resolution and a
range between -40°C to 125°C.
By default, the driver configures as6200 as following:
- Converstion rate: 8 Hz
- Conversion mode: continuous
- Consecutive fault counts: 4 samples
- Alert state: high polarity
- Alert mode: comparator mode
Interrupt is supported for the alert pin.
Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
Link: https://lore.kernel.org/r/d1686678991bf8ee0d00cb08ca046798f37ca4b3.1703127334.git.alkuor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for mp2856/mp2857 device from Monolithic Power Systems, Inc.
(MPS) vendor. This is a dual-loop, digital, multi-phase,
modulation controller.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://lore.kernel.org/r/20231211160519.21254-3-potin.lai.pt@gmail.com
[groeck: Fix checkpatch issues, use i2c_get_match_data()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Remove the #ifdef check for CONFIG_DEBUG_FS and the empty variant
of aqc_debugfs_init(), because the debugfs functions already do nothing
if debugfs isn't enabled.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20231216140754.336775-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for AMD Family 19h Model 8h CPUs, which appear to
be the Zen 3 based AMD Threadripper 5000WX series (Chagall).
The patch was tested with an AMD Threadripper 5955WX.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218244
Tested-by: Jami Kurki <bindkeys@gmail.com>
Signed-off-by: Jami Kurki <bindkeys@gmail.com>
Co-developed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231211210206.11060-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver exposes hardware sensors of the Gigabyte AORUS Waterforce
all-in-one CPU liquid coolers, which communicate through a proprietary
USB HID protocol. Report offsets were initially discovered in [1] and
confirmed by me on a Waterforce X240 by observing the sent reports from
the official software.
Available sensors are pump and fan speed in RPM, as well as coolant
temperature. Also available through debugfs is the firmware version.
Attaching a fan is optional and allows it to be controlled from the
device. If it's not connected, the fan-related sensors will report
zeroes.
The addressable RGB LEDs and LCD screen are not supported in this
driver and should be controlled through userspace tools.
[1]: https://github.com/liquidctl/liquidctl/issues/167
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20231207122402.107032-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/a732270539ef63094a32d0ff582f78e640caf3e4.1701957841.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warning
WARNING: modpost: drivers/hwmon/smsc47m1: section mismatch in reference: smsc47m1_driver+0x8 (section: .data) -> smsc47m1_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/57977a88a9b99b6555b227aa4994ac3df10c6490.1701957840.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In order to introduce a pwm api which can be used from atomic context,
we will need two functions for applying pwm changes:
int pwm_apply_might_sleep(struct pwm *, struct pwm_state *);
int pwm_apply_atomic(struct pwm *, struct pwm_state *);
This commit just deals with renaming pwm_apply_state(), a following
commit will introduce the pwm_apply_atomic() function.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Added custom channel-specific (temp1) attribute for resolution. The wait
time for a conversion in one-shot mode (enable = 0) depends on the
resolution.
When resolution is 12-bit, the conversion time is 140ms, but the minimum
update_interval is 125ms. Handled this problem by waiting an additional
15ms (125ms + 15ms = 140ms).
Added 'mask' parameter to the shutdown_write() function. Now it can
either write or update bits, depending on the value of mask. This is
needed, because for alarms a write is necessary, but for resolution only
the resolution bits should be updated.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-5-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When user writes a value to update_interval which does not match the
possible values, instead of returning invalid error, return the closest
value.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-4-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Added 'mask' parameter to the shutdown_write() function. Now it can
either write or update bits, depending on the value of mask. This is
needed, because for alarms a write is necessary, but for resolution only
the resolution bits should be updated.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-3-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Created of_match_table and id_table entries for max31828 and max31829.
When adi,flt-q and/or adi,alrm-pol are not mentioned,
the default configuration is loaded based on the type of the chip.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-2-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Used fwnode to retrieve data from the devicetree in the init_client
function.
If the uint32 properties are not present, the default values are used
for max31827 chip.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-1-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
A user reported that on this machine, disabling BIOS fan control
is necessary in order to change the fan speed.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-10-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some Dell machines like the Dell Optiplex 7000 do not support
the legacy SMM interface, but instead expect all SMM calls
to be issued over a special WMI interface.
Add support for this interface so users can control the fans
on those machines.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-8-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In the future, multiple SMM calling backends will exist,
with each backend being required to initialize its data.
Introduce a helper function for this so the code necessary
to initialize dell_smm_data is not duplicated between
different backends.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-7-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Currently, i8k_dmi_table contains both entries used for DMI
matching and entries used to override config options. This
does not allow for differentiating between "its safe to issue
raw SMM calls on this machine" and "its not safe to issue raw
SMM calls on this machine, but here are some config values".
Since future SMM backends will need to differentiate between
those two cases, move those config entries into a separate
table. i8k_dmi_table now serves as a general "its safe to issue
raw SMM calls" table.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-6-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Future SMM calling backends will not be able to probe during
module init, meaning the DMI tables holding config data would
have to drop their __initconst attribute.
Prevent this by moving the config handling to module init.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-5-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Future SMM calling backends will not be able to probe during
module init, meaning the DMI tables used for whitelisting
features would have to drop their __initconst attribute.
Prevent this by moving the whitelist handling to module init.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Future SMM calling backends will not be able to probe during
module init, meaning the DMI tables used for backlisting broken
features would have to drop their __initconst attribute.
Prevent this by moving the blacklist handling to module init.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Modern Dell machines support multiple ways to issue an SMM call.
Prepare support for those by introducing dell_smm_ops, which is
used by dell_smm_call() to perform a SMM call. Each SMM backend
needs to provide a dell_smm_ops structure.
Tested-by: <serverror@serverror.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231123004820.50635-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The EliteDesk 800 G6 stores a raw WMI string within the ACPI object in its
BIOS corresponding to one instance of HPBIOS_PlatformEvents.Name. This is
evidently a valid way of representing a WMI data item as far as the
Microsoft ACPI-WMI mapper is concerned, but is preventing the driver from
loading.
This seems quite rare, but add support for such strings. Treating this as a
quirk pretty much means adding that support anyway.
Also clean up an oversight in update_numeric_sensor_from_wobj() in which
the result of hp_wmi_strdup() was being used without error checking.
Reported-by: Lukasz Stelmach <l.stelmach@samsung.com>
Closes: https://lore.kernel.org/linux-hwmon/7850a0bd-60e7-88f8-1d6c-0bb0e3234fdc@roeck-us.net/
Tested-by: Lukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20231123054918.157098-1-james@equiv.tech
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231128180654.395692-3-andriy.shevchenko@linux.intel.com
[groeck: Fixed excessive line length]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The PECI CPU sensors are available as soon as the CPU is powered,
however the PECI DIMM sensors are available after DRAM has been
trained and thresholds have been written by host firmware.
The default timeout of 30 seconds isn't enough for modern multisocket
platforms utilizing DDR5 memory to bring up the memory and enable PECI
sensor data.
Bump the default timeout to 10 minutes in case the system starts
without cached DDR5 training data.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20231130090422.2535542-1-patrick.rudolph@9elements.com
[groeck: List affected driver in patch subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Without visibility into the initializers for data->innr, GCC suspects
using it as an index could walk off the end of the various 14-element
arrays in data. Perform an explicit clamp to the array size. Silences
the following warning with GCC 12+:
../drivers/hwmon/pc87360.c: In function 'pc87360_update_device':
../drivers/hwmon/pc87360.c:341:49: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
341 | data->in_max[i] = pc87360_read_value(data,
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
342 | LD_IN, i,
| ~~~~~~~~~
343 | PC87365_REG_IN_MAX);
| ~~~~~~~~~~~~~~~~~~~
../drivers/hwmon/pc87360.c:209:12: note: at offset 255 into destination object 'in_max' of size 14
209 | u8 in_max[14]; /* Register value */
| ^~~~~~
Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231130200207.work.679-kees@kernel.org
[groeck: Added comment into code clarifying context]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Setting the fan speed is only valid in manual mode; it is not possible
to set the fan's speed in automatic mode.
Return error when attempting to set the fan speed in automatic mode.
Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
Link: https://lore.kernel.org/r/20231121081604.2499-3-xingtong_wu@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The nct6116 has 2 additional PWM pins compared to the nct6106.
Extend the nct6106 PWM arrays to support the nct6116.
Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
Link: https://lore.kernel.org/r/20231121081604.2499-2-xingtong_wu@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for mp5990 device from Monolithic Power Systems, Inc. (MPS)
vendor. This is a Hot-Swap Controller.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20231113155008.2147090-3-peteryin.openbmc@gmail.com
[groeck: Improved and clarified comments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Adjust the 'chips' enum to not use 0, so that no match data can be
distinguished from a valid enum value.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231115205703.3730448-3-robh@kernel.org
[groeck: Use double cast for enum chips assignment to make compiler happy]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Changing the "kinds" enum start value to be 1-indexed instead of
0-indexed caused look-ups in nct6775_device_names[] to be misaligned or
off the end.
Initialize the string list with explicit indexes.
Cc: Rob Herring <robh@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Fixes: 10a0575ea0 ("hwmon: nct6775-i2c: Use i2c_get_match_data()")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Adjust the 'kinds' enum to not use 0, so that no match data can be
distinguished from a valid enum value.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231115205703.3730448-2-robh@kernel.org
[groeck: Use double cast for i2c_get_match_data() to make clang happy]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231115205703.3730448-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Based on the documentation below, the maximum number of Fan tach
channels is 16:
Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt:45:
45 - aspeed,fan-tach-ch : should specify the Fan tach input channel.
46 integer value in the range 0 through 15, with 0 indicating
47 Fan tach channel 0 and 15 indicating Fan tach channel 15.
48 At least one Fan tach input channel is required.
However, the compiler doesn't know that, and legitimaly warns about a potential
overwrite in array `u8 fan_tach_ch_source[16]` in `struct aspeed_pwm_tacho_data`,
in case `index` takes a value outside the boundaries of the array:
drivers/hwmon/aspeed-pwm-tacho.c:
179 struct aspeed_pwm_tacho_data {
...
184 bool fan_tach_present[16];
...
193 u8 fan_tach_ch_source[16];
196 };
In function ‘aspeed_create_fan_tach_channel’,
inlined from ‘aspeed_create_fan’ at drivers/hwmon/aspeed-pwm-tacho.c:877:2,
inlined from ‘aspeed_pwm_tacho_probe’ at drivers/hwmon/aspeed-pwm-tacho.c:936:9:
drivers/hwmon/aspeed-pwm-tacho.c:751:49: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
751 | priv->fan_tach_ch_source[index] = pwm_source;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
drivers/hwmon/aspeed-pwm-tacho.c: In function ‘aspeed_pwm_tacho_probe’:
drivers/hwmon/aspeed-pwm-tacho.c:193:12: note: at offset [48, 255] into destination object ‘fan_tach_ch_source’ of size 16
193 | u8 fan_tach_ch_source[16];
| ^~~~~~~~~~~~~~~~~~
Fix this by sanity checking `index` before using it to index arrays of
size 16 elements in `struct aspeed_pwm_tacho_data`. Also, pass `dev` as
argument to function `aspeed_create_fan_tach_channel()`, and add an error
message in case `index` is out-of-bounds, in which case return `-EINVAL`.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZVPQJIP26dIzRAr6@work
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix some kernel-doc comments to silence the warnings:
drivers/hwmon/sht4x.c:65: warning: Function parameter or member 'valid' not described in 'sht4x_data'
drivers/hwmon/sht4x.c:73: warning: Function parameter or member 'data' not described in 'sht4x_read_values'
drivers/hwmon/sht4x.c:73: warning: Excess function parameter 'sht4x_data' description in 'sht4x_read_values'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7220
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231110055341.39939-1-yang.lee@linux.alibaba.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for EMC1442 which is compatible with EMC1402.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20231102090808.427351-1-Delphine_CC_Chiu@wiwynn.com
[groeck: compatible with EMC1402, not EMC1403]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Remove device reference from struct ltc2991_state since it is used only
inside the init function.
Pass the struct device as parameter to the init function instead.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231031095647.48376-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Adding Pulse Width Modulation (PWM) and fan tacho NPCM8xx support to
NPCM PWM and fan tacho driver.
NPCM8xx uses a different number of PWM devices.
As part of adding NPCM8XX support:
- Add NPCM8xx specific compatible string.
- Add data to handle architecture-specific PWM parameters.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20231031075806.400872-2-tmaimon77@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
It seems that when the driver is built-in, the HID bus is
initialized after the driver is loaded, which whould cause
module_hid_driver() to fail.
Fix this by registering the driver after the HID bus using
late_initcall() in accordance with other hwmon HID drivers.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de
[groeck: Dropped "compile tested" comment; the patch has been tested
but the tester did not provide a Tested-by: tag]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
