Commit Graph

10052 Commits

Author SHA1 Message Date
Mauro Carvalho Chehab 4d2e26a38f docs: powerpc: convert docs to ReST and rename to *.rst
Convert docs to ReST and add them to the arch-specific
book.

The conversion here was trivial, as almost every file there
was already using an elegant format close to ReST standard.

The changes were mostly to mark literal blocks and add a few
missing section title identifiers.

One note with regards to "--": on Sphinx, this can't be used
to identify a list, as it will format it badly. This can be
used, however, to identify a long hyphen - and "---" is an
even longer one.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
2019-07-17 06:57:51 -03:00
Thomas Hellstrom 406de552c2 MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
Alok Kataria will be handing over VMware's maintainership of these
interfaces to Thomas Hellström, with pv-drivers as backup contact.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alok Kataria <akataria@vmware.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lkml.kernel.org/r/20190328120558.29897-1-thellstrom@vmware.com
2019-07-17 00:42:27 +02:00
Linus Torvalds c309b6f242 docs conversion for v5.3-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl0tpocACgkQCF8+vY7k
 4RWoxA//b/fmDXP3WPzrjjSmpyB9ml0/epKzPbT5S2j0lftqKBmet29k+PCjVrTx
 Nq2QauehY9ug5h8UMVUCmzPr95F0tSIGRoqk1vrn7z0K3q6k1SHrtvqbY1Bgb2Uk
 Qvh2YFU4fQLJg8WAbExCjxCdbdmBKQVGKTwCtM+tP5OMxwAFOmQrjGaUaKCKIIA2
 7Wzrx8CpSji+bJ3uK/d36c+4M9oDly5eaxBhoboL3BI0y+GqwiSASGwTO7BxrPOg
 0wq5IZHnqS8+bprT9xQdDOqf+UOY9U1cxE/+sqsHxblfUEx9gfLy/R+FLmJn+SS9
 Z3yLy4SqVHQMpWBjEAGodohikF60PAuTdymSC11jqFaKCUxWrIZg5xO+0blMrxPF
 7vYIexutCkaBMHBlNaNsHIqB7B/2FGGKoN7QW64hwvwJCGvF7OmJcV+R4bROGvh4
 nFuis9/Nm66Fq7I3aw37ThyZ0aWZdaQ0QJTH9ksxU/ZCz2hhMNYu/rXggrDvkS4U
 nr77ZT5Gd7nj4b110zf8+99uiGiinY6hTfzPAuTCLBhaxwrv4/xDHAhpwdEB5T4j
 8gOkxV8c0XWtL7sKqhGJvs/RRe2za0Y9XH6fyxsYfWcfuLjEvug8ouXMad9gxFWH
 DL3WnKJEMGLScei2wux4kGOwEbkR1bUf2cHJfh3GpCB/y8vgLOc=
 =smxY
 -----END PGP SIGNATURE-----

Merge tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull rst conversion of docs from Mauro Carvalho Chehab:
 "As agreed with Jon, I'm sending this big series directly to you, c/c
  him, as this series required a special care, in order to avoid
  conflicts with other trees"

* tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits)
  docs: kbuild: fix build with pdf and fix some minor issues
  docs: block: fix pdf output
  docs: arm: fix a breakage with pdf output
  docs: don't use nested tables
  docs: gpio: add sysfs interface to the admin-guide
  docs: locking: add it to the main index
  docs: add some directories to the main documentation index
  docs: add SPDX tags to new index files
  docs: add a memory-devices subdir to driver-api
  docs: phy: place documentation under driver-api
  docs: serial: move it to the driver-api
  docs: driver-api: add remaining converted dirs to it
  docs: driver-api: add xilinx driver API documentation
  docs: driver-api: add a series of orphaned documents
  docs: admin-guide: add a series of orphaned documents
  docs: cgroup-v1: add it to the admin-guide book
  docs: aoe: add it to the driver-api book
  docs: add some documentation dirs to the driver-api book
  docs: driver-model: move it to the driver-api book
  docs: lp855x-driver.rst: add it to the driver-api book
  ...
2019-07-16 12:21:41 -07:00
Linus Torvalds 3c69914b4c for-linus-20190715
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXSxgkQAKCRCRxhvAZXjc
 opJ3AP9TWIWhEC0dzbNmzh0STj/Vyl5KYEpdMbi7HNeAmIEAfQD6A3HI4bVJbN08
 jH44U7DLzHJyHefKlB8jHEKEVYJWqgo=
 =74Bg
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20190715' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull pidfd and clone3 fixes from Christian Brauner:
 "This contains a bugfix for CLONE_PIDFD when used with the legacy clone
  syscall, two fixes to ensure that syscall numbering and clone3
  entrypoint implementations will stay consistent, and an update for the
  maintainers file:

   - The addition of clone3 broke CLONE_PIDFD for legacy clone on all
     architectures that use do_fork() directly instead of calling the
     clone syscall itself. (Fwiw, cleaning do_fork() up is on my todo.)

     The reason this happened was that during conversion of _do_fork()
     to use struct kernel_clone_args we missed that do_fork() is called
     directly by various architectures. This is fixed by making sure
     that the pidfd argument in struct kernel_clone_args is correctly
     initialized with the parent_tidptr argument passed down from
     do_fork(). Additionally, do_fork() missed a check to make
     CLONE_PIDFD and CLONE_PARENT_SETTID mutually exclusive just a
     clone() does. This is now fixed too.

   - When clone3() was introduced we skipped architectures that require
     special handling for fork-like syscalls. Their syscall tables did
     not contain any mention of clone3().

     To make sure that Arnd's work to make syscall numbers on all
     architectures identical (minus alpha) was not for naught we are
     placing a comment in all syscall tables that do not yet implement
     clone3(). The comment makes it clear that 435 is reserved for
     clone3 and should not be used.

   - Also, this contains a patch to make the clone3() syscall definition
     in asm-generic/unist.h conditional on __ARCH_WANT_SYS_CLONE3. This
     lets us catch new architectures that implicitly make use of clone3
     without setting __ARCH_WANT_SYS_CLONE3 which is a good indicator
     that they did not check whether it needs special treatment or not.

   - Finally, this contains a patch to add me as maintainer for pidfd
     stuff so people can start blaming me (more)"

* tag 'for-linus-20190715' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  MAINTAINERS: add new entry for pidfd api
  unistd: protect clone3 via __ARCH_WANT_SYS_CLONE3
  arch: mark syscall number 435 reserved for clone3
  clone: fix CLONE_PIDFD support
2019-07-16 11:30:07 -07:00
Linus Torvalds 9637d51734 for-linus-20190715
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl0s1ZEQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpiCEEACE9H/pXoegTTWIVPVajMlsa19UHIeilk4N
 GI7oKSiirQEMZnAOmrEzgB4/0zyYQsVypys0gZlYUD3GJVsXDT3zzjNXL5NpVg/O
 nqwSGWMHBSjWkLbaM40Pb2QLXsYgveptNL+9PtxrgtoYPoT5/+TyrJMFrRfi72EK
 WFeNDKOu6aJxpJ26JSsckJ0gluKeeEpRoEqsgHGIwaMIGHQf+b+ikk7tel5FAIgA
 uDwwD+Oxsdgh/ChsXL0d90GkcbcSp6GQ7GybxVmw/tPijx6mpeIY72xY3Zx+t8zF
 b71UNk6NmCKjOPO/6fiuYKKTYw+KhzlyEKO0j675HKfx2AhchEwKw0irp4yUlydA
 zxWYmz4U7iRgktJtymv3J4FEQQ3S6d1EnuQkQNX1LwiOsEsfzhkWi+7jy7KFhZoJ
 AqtYzqnOXvLx92q0vloj06HtK6zo+I/MINldy0+qn9lq0N0VF+dctyztAHLsF7P6
 pUtS6i7l1JSFKAmMhC31sIj5TImaehM2e/TWMUPEDZaO96oKCmQwOF1oiloc6vlW
 h4xWsxP/9zOFcWNyPzy6Vo3JUXWRvFA7K+jV3Hsukw6rVHiNCGVYGSlTv8Roi5b7
 I4ggu9R2JOGyku7UIlL50IRxEyjAp11LaO8yHhcCnRB65rmyBuNMQNcfOsfxpZ5Y
 1mtSNhm5TQ==
 =g8xI
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-block

Pull more block updates from Jens Axboe:
 "A later pull request with some followup items. I had some vacation
  coming up to the merge window, so certain things items were delayed a
  bit. This pull request also contains fixes that came in within the
  last few days of the merge window, which I didn't want to push right
  before sending you a pull request.

  This contains:

   - NVMe pull request, mostly fixes, but also a few minor items on the
     feature side that were timing constrained (Christoph et al)

   - Report zones fixes (Damien)

   - Removal of dead code (Damien)

   - Turn on cgroup psi memstall (Josef)

   - block cgroup MAINTAINERS entry (Konstantin)

   - Flush init fix (Josef)

   - blk-throttle low iops timing fix (Konstantin)

   - nbd resize fixes (Mike)

   - nbd 0 blocksize crash fix (Xiubo)

   - block integrity error leak fix (Wenwen)

   - blk-cgroup writeback and priority inheritance fixes (Tejun)"

* tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits)
  MAINTAINERS: add entry for block io cgroup
  null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED
  block: Limit zone array allocation size
  sd_zbc: Fix report zones buffer allocation
  block: Kill gfp_t argument of blkdev_report_zones()
  block: Allow mapping of vmalloc-ed buffers
  block/bio-integrity: fix a memory leak bug
  nvme: fix NULL deref for fabrics options
  nbd: add netlink reconfigure resize support
  nbd: fix crash when the blksize is zero
  block: Disable write plugging for zoned block devices
  block: Fix elevator name declaration
  block: Remove unused definitions
  nvme: fix regression upon hot device removal and insertion
  blk-throttle: fix zero wait time for iops throttled group
  block: Fix potential overflow in blk_report_zones()
  blkcg: implement REQ_CGROUP_PUNT
  blkcg, writeback: Implement wbc_blkcg_css()
  blkcg, writeback: Add wbc->no_cgroup_owner
  blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()
  ...
2019-07-15 21:20:52 -07:00
Linus Torvalds 273cbf61c3 Merge branch 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "New stuff from the I2C world:

   - in the core, getting irqs from ACPI is now similar to OF

   - new driver for MediaTek MT7621/7628/7688 SoCs

   - bcm2835, i801, and tegra drivers got some more attention

   - GPIO API cleanups

   - cleanups in the core headers

   - lots of usual driver updates"

* 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits)
  i2c: mt7621: Fix platform_no_drv_owner.cocci warnings
  i2c: cpm: remove casting dma_alloc
  dt-bindings: i2c: sun6i-p2wi: Fix the binding example
  dt-bindings: i2c: mv64xxx: Fix the example compatible
  i2c: i801: Documentation update
  i2c: i801: Add support for Intel Tiger Lake
  i2c: i801: Fix PCI ID sorting
  dt-bindings: i2c-stm32: document optional dmas
  i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support
  i2c: core: Tidy up handling of init_irq
  i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  i2c: core: Move ACPI IRQ handling to probe time
  i2c: acpi: Factor out getting the IRQ from ACPI
  i2c: acpi: Use available IRQ helper functions
  i2c: core: Allow whole core to use i2c_dev_irq_from_resources
  eeprom: at24: modify a comment referring to platform data
  dt-bindings: i2c: omap: Add new compatible for J721E SoCs
  dt-bindings: i2c: mv64xxx: Add YAML schemas
  dt-bindings: i2c: sun6i-p2wi: Add YAML schemas
  i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  ...
2019-07-15 21:10:39 -07:00
Linus Torvalds fb4da215ed pci-v5.3-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl0siFoUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vzi9A//S4jRyyZrgUr88Az0GbgMhE4b3yqc
 uL7om/Sf+443gG6C+aKkZSM/IE9hrbyIKuYq7GGxDkzZ/HkucZo2yIuAHkPgG4ik
 QQYJ8fJsmMq1bUht87c1ZZwGP0++Deq/Ns2+VNy/WBYqKLulnV0DvEEaJgPs9C5D
 ppwccGdo6UghiujBTpE4ddUBjFjjURWqT6wSnMRDQ4EGwfUhG0MWwwHKI4hbBuaL
 N6refuggdYyUUX5FeUOHa6VF6uTnSSAQ75k+40n4nljdayqoumHLskst77o9q5ZI
 oXjdpwgmuEqYhfp03HEA4Xo/bBxiRj76NuTiEMKvPokxjpanwbLrdV0GhF0OIlM0
 rp1NOI1w+vppFrU+rc2gtq+7hYXFmvdhjS29hFLeD91PP36N5d29jW5NVFpm7GCm
 n4TMGAOsu8RB+bNua6ZbZVcDk2EnPgQeIcM0ZPoBtPK19Fg/rScdEU4u/aFE1Y0Q
 C+Ks7D1qCvFpHzl/xAg0oo9v/jFsWef3qnQWOzot964Zz4W4NSVvB9Ox6Vbfj6C4
 v331LJmlPxG8fxBNA3q28FrTxcG1NW6sgo3WY9VoSp/vc0aqaPKhm7sbraTt5IrI
 TwqA/WhnAHv90MQCGFcofANyYTkjPkKk2QBFK6b0suoAmVdwVWWELi1WaZ+HdvgQ
 JP7YpmC2cXcQBPk=
 =ZGxL
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration changes:

   - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us
     to preserve its resource assignments (Benjamin Herrenschmidt)

   - Simplify resource distribution (Nicholas Johnson)

   - Decode 32 GT/s link speed (Gustavo Pimentel)

  Virtualization:

   - Fix incorrect caching of VF config space size (Alex Williamson)

   - Fix VF driver probing sysfs knobs (Alex Williamson)

  Peer-to-peer DMA:

   - Fix dma_virt_ops check (Logan Gunthorpe)

  Altera host bridge driver:

   - Allow building as module (Ley Foon Tan)

  Armada 8K host bridge driver:

   - add PHYs support (Miquel Raynal)

  DesignWare host bridge driver:

   - Export APIs to support removable loadable module (Vidya Sagar)

   - Enable Relaxed Ordering erratum workaround only on Tegra20 &
     Tegra30 (Vidya Sagar)

  Hyper-V host bridge driver:

   - Fix use-after-free in eject (Dexuan Cui)

  Mobiveil host bridge driver:

   - Clean up and fix many issues, including non-identify mapped
     windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou
     Zhiqiang)

  Qualcomm host bridge driver:

   - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson)

   - Add QCS404 support (Bjorn Andersson)

   - Assert PERST for at least 100ms (Niklas Cassel)

  R-Car host bridge driver:

   - Add r8a774a1 DT support (Biju Das)

  Tegra host bridge driver:

   - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol
     details) AER, GPIO-based PERST# (Manikanta Maddireddy)

   - Fix many issues, including power-on failure cases, interrupt
     masking in suspend, UPHY settings, AFI dynamic clock gating,
     pending DLL transactions (Manikanta Maddireddy)

  Xilinx host bridge driver:

   - Fix NWL Multi-MSI programming (Bharat Kumar Gogada)

  Endpoint support:

   - Fix 64bit BAR support (Alan Mikhak)

   - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko)

  Bug fixes:

   - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu)

   - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner)

   - Ignore lockdep for sysfs "remove" (Marek Vasut)

  Misc:

   - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)"

* tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits)
  PCI: Enable NVIDIA HDA controllers
  tools: PCI: Fix installation when `make tools/pci_install`
  PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
  PCI: Fix typos and whitespace errors
  PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()
  PCI: mobiveil: Fix infinite-loop in the INTx handling function
  PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine
  PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window
  PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window
  PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup
  PCI: mobiveil: Clear the control fields before updating it
  PCI: mobiveil: Add configured inbound windows counter
  PCI: mobiveil: Fix the valid check for inbound and outbound windows
  PCI: mobiveil: Clean-up program_{ib/ob}_windows()
  PCI: mobiveil: Remove an unnecessary return value check
  PCI: mobiveil: Fix error return values
  PCI: mobiveil: Refactor the MEM/IO outbound window initialization
  PCI: mobiveil: Make some register updates more readable
  PCI: mobiveil: Reformat the code for readability
  dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional
  ...
2019-07-15 20:44:49 -07:00
Linus Torvalds 2a3c389a0f 5.3 Merge window RDMA pull request
A smaller cycle this time. Notably we see another new driver, 'Soft
 iWarp', and the deletion of an ancient unused driver for nes.
 
 - Revise and simplify the signature offload RDMA MR APIs
 
 - More progress on hoisting object allocation boiler plate code out of the
   drivers
 
 - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw
 
 - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion
 
 - Removal of obsolete ib_ucm chardev and nes driver
 
 - netlink based discovery of chardevs and autoloading of the modules
   providing them
 
 - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
 
 - New driver 'siw' for software based iWarp running on top of netdev,
   much like rxe's software RoCE.
 
 - mlx5 feature to report events in their raw devx format to userspace
 
 - Expose per-object counters through rdma tool
 
 - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
   from netdev
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl0ozSwACgkQOG33FX4g
 mxqncg//Qe2zSnlbd6r3hofsc1WiHSx/CiXtT52BUGipO+cWQUwO7hGFuUHIFCuZ
 JBg7mc998xkyLIH85a/txd+RwAIApKgHVdd+VlrmybZeYCiERAMFpWg8cHpzrbnw
 l3Ln9fTtJf/NAhO0ZCGV9DCd01fs9yVQgAv21UnLJMUhp9Pzk/iMhu7C7IiSLKvz
 t7iFhEqPXNJdoqZ+wtWyc/463YxKUd9XNg9Z1neQdaeZrX4UjgDbY9x/ub3zOvQV
 jc/IL4GysJ3z8mfx5mAd6sE/jAjhcnJuaGYYATqkxiLZEP+muYwU50CNs951XhJC
 b/EfRQIcLg9kq/u6CP+CuWlMrRWy3U7yj3/mrbbGhlGq88Yt6FGqUf0aFy6TYMaO
 RzTG5ZR+0AmsOrR1QU+DbH9CKX5PGZko6E7UCdjROqUlAUOjNwRr99O5mYrZoM9E
 PdN2vtdWY9COR3Q+7APdhWIA/MdN2vjr3LDsR3H94tru1yi6dB/BPDRcJieozaxn
 2T+YrZbV+9/YgrccpPQCilaQdanXKpkmbYkbEzVLPcOEV/lT9odFDt3eK+6duVDL
 ufu8fs1xapMDHKkcwo5jeNZcoSJymAvHmGfZlo2PPOmh802Ul60bvYKwfheVkhHF
 Eee5/ovCMs1NLqFiq7Zq5mXO0fR0BHyg9VVjJBZm2JtazyuhoHQ=
 =iWcG
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "A smaller cycle this time. Notably we see another new driver, 'Soft
  iWarp', and the deletion of an ancient unused driver for nes.

   - Revise and simplify the signature offload RDMA MR APIs

   - More progress on hoisting object allocation boiler plate code out
     of the drivers

   - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
     i40iw

   - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
     conversion

   - Removal of obsolete ib_ucm chardev and nes driver

   - netlink based discovery of chardevs and autoloading of the modules
     providing them

   - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma

   - New driver 'siw' for software based iWarp running on top of netdev,
     much like rxe's software RoCE.

   - mlx5 feature to report events in their raw devx format to userspace

   - Expose per-object counters through rdma tool

   - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
     from netdev"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
  RMDA/siw: Require a 64 bit arch
  RDMA/siw: Mark expected switch fall-throughs
  RDMA/core: Fix -Wunused-const-variable warnings
  rdma/siw: Remove set but not used variable 's'
  rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
  RDMA/siw: Add missing rtnl_lock around access to ifa
  rdma/siw: Use proper enumerated type in map_cqe_status
  RDMA/siw: Remove unnecessary kthread create/destroy printouts
  IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
  RDMA/core: Fix race when resolving IP address
  RDMA/core: Make rdma_counter.h compile stand alone
  IB/core: Work on the caller socket net namespace in nldev_newlink()
  RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
  RDMA/mlx5: Set RDMA DIM to be enabled by default
  RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
  RDMA/core: Provide RDMA DIM support for ULPs
  linux/dim: Implement RDMA adaptive moderation (DIM)
  IB/mlx5: Report correctly tag matching rendezvous capability
  docs: infiniband: add it to the driver-api bookset
  IB/mlx5: Implement VHCA tunnel mechanism in DEVX
  ...
2019-07-15 20:38:15 -07:00
Linus Torvalds 8de262531f - Core Frameworks
- Set 'struct device' fwnode when registering a new device
 
  - New Drivers
    - Add support for ROHM BD70528 PMIC
 
  - New Device Support
    - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
    - Add support for RK809 and RK817 to Rockchip RK808
    - Add support for Lid Angle to ChromeOS core
    - Add support for CS47L15 CODEC to Madera core
    - Add support for CS47L92 CODEC to Madera core
    - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
    - Add support for Add Intel Elkhart Lake PCH to Intel LPSS
 
  - New Functionality
    - Provide regulator supply information when registering; madera-core
    - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
    - Allow over-riding power button press via Device Tree; rohm-bd718x7
    - Differentiate between running processors; cros_ec_dev
 
  - Fix-ups
    - Big header file update; cros_ec_commands.h
    - Split header per-subsystem; rohm-bd718x7
    - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
    - Trivial; sorting, coding style; intel-lpss-pci
    - Only remove Power Off functionality if set locally; rk808
    - Make use for Power Off Prepare(); rk808
    - Fix spelling mistake in header guards; stmfx
    - Properly free IDA resources
    - SPDX fixups; cs47lXX-tables, madera
    - Error path fixups; hi655x-pmic
 
  - Bug Fixes
    - Add missing break in case() statement
    - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
    - Fix reference to Device Tree documentation; madera
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl0sLxgACgkQUa+KL4f8
 d2E25Q/9HmDJIdfyDQg0xv5IM5HS1WsP9BcJCEgoRIsad4mMDRYt+ZeLbslwMhue
 E9tsFH359gGvyqR+7d6hPpEUET1UEcJy4eRD1zAc0+epllQTDHSy8oHt1dtH+8xB
 2AU5rvAKOqBk83D+V2Hkx2KcroWEQQNYIoR9/12Pi3xmEB1uaCO0/Ajd3B28bIBM
 Tzi3cVQ3U7jY9EIM44GVTsjDAbMSkQR0iab6cQF0vJAWaUmGKlsO7iRrU1XkN69V
 qXyBauI8WGiGssihrE8r+jYvHvmg7hA9OKZIckUaMXD/k7kpHbwIaFRh7gukq4Re
 Q6Cy30NfVJ1tY66/5oqN6gj5znfeuEudMCCzYAkzlROSp5eApe2Ke5ajYn3kOCZd
 ZKcsrw9Fiox1lKmuWXDbyf0nqf4zwdDPAnShRWaaF5aipwgywyGcwSigVtK4F0P5
 Hjc5RLv7GjTAJq+ZzwgKyAdtx8L0mhdLd1ZTQpEXk/g/E9dW4GF72hWj9TQ/9BnA
 ZflKv8aP3lDGRHgO3Huwi4lMzskB8BVCQMCFwLwGs5cY1oZQhAjTdJzBZjTGexhC
 evuuA8OUsCrOWMvnZf3saSdHJ1iMHtfPnqEGHRJQtNj4fFaXv80LasIomvvfJc1/
 9JlRyAgm2pF7YDrgTh65ZzBb324eKSZZoAj9XZbnTyzxUAcF69A=
 =A3jw
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Set 'struct device' fwnode when registering a new device

  New Drivers:
   - Add support for ROHM BD70528 PMIC

  New Device Support:
   - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
   - Add support for RK809 and RK817 to Rockchip RK808
   - Add support for Lid Angle to ChromeOS core
   - Add support for CS47L15 CODEC to Madera core
   - Add support for CS47L92 CODEC to Madera core
   - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
   - Add support for Add Intel Elkhart Lake PCH to Intel LPSS

  New Functionality:
   - Provide regulator supply information when registering; madera-core
   - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
   - Allow over-riding power button press via Device Tree; rohm-bd718x7
   - Differentiate between running processors; cros_ec_dev

  Fix-ups:
   - Big header file update; cros_ec_commands.h
   - Split header per-subsystem; rohm-bd718x7
   - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
   - Trivial; sorting, coding style; intel-lpss-pci
   - Only remove Power Off functionality if set locally; rk808
   - Make use for Power Off Prepare(); rk808
   - Fix spelling mistake in header guards; stmfx
   - Properly free IDA resources
   - SPDX fixups; cs47lXX-tables, madera
   - Error path fixups; hi655x-pmic

  Bug Fixes:
   - Add missing break in case() statement
   - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
   - Fix reference to Device Tree documentation; madera"

* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
  mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
  mfd: madera: Fixup SPDX headers
  mfd: madera: Remove some unused registers and fix some defaults
  mfd: intel-lpss: Release IDA resources
  mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
  mfd: cs5535-mfd: Remove ifdef OLPC noise
  mfd: stmfx: Fix macro definition spelling
  dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
  MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
  mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
  mfd: rk808: Prepare rk805 for poweroff
  mfd: rk808: Check pm_power_off pointer
  mfd: cros_ec: differentiate SCP from EC by feature bit
  dt-bindings: Add binding for cros-ec-rpmsg
  mfd: madera: Add Madera core support for CS47L92
  mfd: madera: Add Madera core support for CS47L15
  mfd: madera: Update DT bindings to add additional CODECs
  mfd: madera: Add supply mapping for MICVDD
  mfd: madera: Fix potential uninitialised use of variable
  mfd: madera: Fix bad reference to pinctrl.txt file
  ...
2019-07-15 20:18:40 -07:00
Linus Torvalds be8454afc5 drm main pull request for v5.3-rc1 (sans mm changes)
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdLMSbAAoJEAx081l5xIa+udkP/iWr8mw44tWYb8Wuzc/aR91v
 02X/J4S9XTQttNn/1Gpq9ItTLMf0Gc08tk1wEBBHAWi/qGaGZS2al+rv0afeuuQa
 aFhQzioDi7K/YZt92iEJhdx7wVMyydICTg3INmYlSP7/FyzLp6gBQRGSJ1kX5mHZ
 qWsFZgUOH9V5evyB6fDMleDaqFOKfcwrD7XYwbOheL/HeYQSv5AYn3VBupBFQ76L
 0hclI5VzZQ5V0nnqRTNDQVA9Yl6NTl+2eXTn5vuBtwKXEI6JJw8eihZp2oZDXqfS
 L441w7wGbkRPzN5kjMZjs1ToPMTlMveR5kL6Sc+o3DT/HmIr1odeaSDXR/93UOLd
 z0CRJ6xMC8h1ThLNHp8UgbxCKqIwYPsY2wVqjsJt7lDY5jma7Yv2YJ9ocYGHN/sO
 DVHcU6ugbwvuC5wZZtVZl5J4hjnBZwNRGSVK+iM0tkjalgdEuSFehXT7eQ8SphF/
 yI5gD1xNEwGfZ4bvZ3u/QrDCcpUAgPIUYmxEa2tPJILQWOJ9O87yc0y9Z21k9Ef1
 9yDqrFV3sPqC2xj/0ufZG/18+Yt99Ykg1jQE3RGDwD/59KAeqPbOvqTKyVODV9jE
 qje6ScSIc2G0713uss2bcaD3k+rCB5YL2JkKrk5OWW/T2+n9T+JFaiNh7dnSFFcU
 gBKyeY24OyCDMwXrby0K
 =SI+Y
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "The biggest thing in this is the AMD Navi GPU support, this again
  contains a bunch of header files that are large. These are the new AMD
  RX5700 GPUs that just recently became available.

  New drivers:
   - ST-Ericsson MCDE driver
   - Ingenic JZ47xx SoC

  UAPI change:
   - HDR source metadata property

  Core:
   - HDR inforframes and EDID parsing
   - drm hdmi infoframe unpacking
   - remove prime sg_table caching into dma-buf
   - New gem vram helpers to reduce driver code
   - Lots of drmP.h removal
   - reservation fencing fix
   - documentation updates
   - drm_fb_helper_connector removed
   - mode name command handler rewrite

  fbcon:
   - Remove the fbcon notifiers

  ttm:
   - forward progress fixes

  dma-buf:
   - make mmap call optional
   - debugfs refcount fixes
   - dma-fence free with pending signals fix
   - each dma-buf gets an inode

  Panels:
   - Lots of additional panel bindings

  amdgpu:
   - initial navi10 support
   - avoid hw reset
   - HDR metadata support
   - new thermal sensors for vega asics
   - RAS fixes
   - use HMM rather than MMU notifier
   - xgmi topology via kfd
   - SR-IOV fixes
   - driver reload fixes
   - DC use a core bpc attribute
   - Aux fixes for DC
   - Bandwidth calc updates for DC
   - Clock handling refactor
   - kfd VEGAM support

  vmwgfx:
   - Coherent memory support changes

  i915:
   - HDR Support
   - HDMI i2c link
   - Icelake multi-segmented gamma support
   - GuC firmware update
   - Mule Creek Canyon PCH support for EHL
   - EHL platform updtes
   - move i915.alpha_support to i915.force_probe
   - runtime PM refactoring
   - VBT parsing refactoring
   - DSI fixes
   - struct mutex dependency reduction
   - GEM code reorg

  mali-dp:
   - Komeda driver features

  msm:
   - dsi vs EPROBE_DEFER fixes
   - msm8998 snapdragon 835 support
   - a540 gpu support
   - mdp5 and dpu interconnect support

  exynos:
   - drmP.h removal

  tegra:
   - misc fixes

  tda998x:
   - audio support improvements
   - pixel repeated mode support
   - quantisation range handling corrections
   - HDMI vendor info fix

  armada:
   - interlace support fix
   - overlay/video plane register handling refactor
   - add gamma support

  rockchip:
   - RX3328 support

  panfrost:
   - expose perf counters via hidden ioctls

  vkms:
   - enumerate CRC sources list

  ast:
   - rework BO handling

  mgag200:
   - rework BO handling

  dw-hdmi:
   - suspend/resume support

  rcar-du:
   - R8A774A1 Soc Support
   - LVDS dual-link mode support
   - Additional formats
   - Misc fixes

  omapdrm:
   - DSI command mode display support

  stm
   - fb modifier support
   - runtime PM support

  sun4i:
   - use vmap ops

  vc4:
   - binner bo binding rework

  v3d:
   - compute shader support
   - resync/sync fixes
   - job management refactoring

  lima:
   - NULL pointer in irq handler fix
   - scheduler default timeout

  virtio:
   - fence seqno support
   - trace events

  bochs:
   - misc fixes

  tc458767:
   - IRQ/HDP handling

  sii902x:
   - HDMI audio support

  atmel-hlcdc:
   - misc fixes

  meson:
   - zpos support"

* tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits)
  Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next"
  Revert "mm: adjust apply_to_pfn_range interface for dropped token."
  mm: adjust apply_to_pfn_range interface for dropped token.
  drm/amdgpu/navi10: add uclk activity sensor
  drm/amdgpu: properly guard the generic discovery code
  drm/amdgpu: add missing documentation on new module parameters
  drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback
  drm/amd/display: avoid 64-bit division
  drm/amdgpu/psp11: simplify the ucode register logic
  drm/amdgpu: properly guard DC support in navi code
  drm/amd/powerplay: vega20: fix uninitialized variable use
  drm/amd/display: dcn20: include linux/delay.h
  amdgpu: make pmu support optional
  drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent
  drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq
  drm/amd/powerplay: Use memset to initialize metrics structs
  drm/amdgpu/mes10.1: Fix header guard
  drm/amd/powerplay: add temperature sensor support for navi10
  drm/amdgpu: fix scheduler timeout calc
  drm/amdgpu: Prepare for hmm_range_register API change (v2)
  ...
2019-07-15 19:04:27 -07:00
Olof Johansson 7cba7cacee Merge branch 'for-arm-soc' of git://git.armlinux.org.uk/~rmk/linux-arm into arm/soc
* 'for-arm-soc' of git://git.armlinux.org.uk/~rmk/linux-arm: (21 commits)
  ARM: sa1100: convert to common clock framework
  ARM: riscpc: enable chained scatterlist support
  ARM: riscpc: reduce IRQ handling code
  ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
  ARM: riscpc: parse video information from tagged list
  ARM: riscpc: add ecard quirk for Atomwide 3port serial card
  ARM: sa1100/neponset: convert serial to use gpiod APIs
  ARM: sa1100/hackkit: remove empty serial mctrl functions
  ARM: sa1100/badge4: remove commented out modem control initialisers
  ARM: sa1100/h3xxx: convert serial to gpiod APIs
  ARM: sa1100/assabet: convert serial to gpiod APIs
  serial: sa1100: add note about modem control signals
  serial: sa1100: add support for mctrl gpios
  ARM: riscpc: dma: use __iomem pointers for writing DMA
  ARM: riscpc: dma: improve address/length writing
  ARM: riscpc: dma: make state a local variable
  ARM: riscpc: dma: eliminate "cur_sg" scatterlist usage
  ARM: riscpc: fix DMA
  ARM: riscpc: fix ecard printing
  ARM: riscpc: fix lack of keyboard interrupts after irq conversion
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-15 17:29:45 -07:00
Dave Airlie 3729fe2bc2 Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next"
This reverts commit 031e610a6a, reversing
changes made to 52d2d44eee.

The mm changes in there we premature and not fully ack or reviewed by core mm folks,
I dropped the ball by merging them via this tree, so lets take em all back out.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-07-16 04:07:13 +10:00
Sheriff Esseson 89b408a68b Documentation: filesystem: Convert xfs.txt to ReST
Move xfs.txt to admin-guide, convert xfs.txt to ReST and broken references

Signed-off-by: Sheriff Esseson <sheriffesseson@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-07-15 09:15:09 -07:00
Darrick J. Wong 1c230208f5 iomap: start moving code to fs/iomap/
Create the build infrastructure we need to start migrating iomap code to
fs/iomap/ from fs/iomap.c.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-07-15 08:50:57 -07:00
Mauro Carvalho Chehab c2746a1eb7 docs: gpio: add sysfs interface to the admin-guide
While this is stated as obsoleted, the sysfs interface described
there is still valid, and belongs to the admin-guide.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-15 11:03:03 -03:00
Mauro Carvalho Chehab 4745dc8abb docs: phy: place documentation under driver-api
This subsystem-specific documentation belongs to the
driver-api.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:03 -03:00
Mauro Carvalho Chehab 65388dad1b docs: serial: move it to the driver-api
The contents of this directory is mostly driver-api stuff.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:03 -03:00
Mauro Carvalho Chehab baa293e954 docs: driver-api: add a series of orphaned documents
There are lots of documents under Documentation/*.txt and a few other
orphan documents elsehwere that belong to the driver-API book.

Move them to their right place.

Reviewed-by: Cornelia Huck <cohuck@redhat.com> # vfio-related parts
Acked-by: Logan Gunthorpe <logang@deltatee.com> # switchtec
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:02 -03:00
Mauro Carvalho Chehab 4f4cfa6c56 docs: admin-guide: add a series of orphaned documents
There are lots of documents that belong to the admin-guide but
are on random places (most under Documentation root dir).

Move them to the admin guide.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2019-07-15 11:03:02 -03:00
Mauro Carvalho Chehab da82c92f11 docs: cgroup-v1: add it to the admin-guide book
Those files belong to the admin guide, so add them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:02 -03:00
Mauro Carvalho Chehab 83bbf6e103 docs: aoe: add it to the driver-api book
Those files belong to the admin guide, so add them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Justin Sanders <justin@coraid.com>
2019-07-15 11:03:02 -03:00
Mauro Carvalho Chehab 56198359b6 docs: lp855x-driver.rst: add it to the driver-api book
The content of this file is intended for backlight Kernel
developers.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:02 -03:00
Mauro Carvalho Chehab 2dbc0838bc docs: ocxl.rst: add it to the uAPI book
The content of this file is user-faced.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
2019-07-15 11:03:02 -03:00
Mauro Carvalho Chehab e8d776f20f docs: x86: move two x86-specific files to x86 arch dir
Those two docs belong to the x86 architecture:

   Documentation/Intel-IOMMU.txt -> Documentation/x86/intel-iommu.rst
   Documentation/intel_txt.txt -> Documentation/x86/intel_txt.rst

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:01 -03:00
Mauro Carvalho Chehab e7751617dd docs: blockdev: add it to the admin-guide
The blockdev book basically contains user-faced documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:01 -03:00
Mauro Carvalho Chehab 330d481052 docs: admin-guide: add kdump documentation into it
The Kdump documentation describes procedures with admins use
in order to solve issues on their systems.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:01 -03:00
Mauro Carvalho Chehab 9e1cbede26 docs: admin-guide: add laptops documentation
The docs under Documentation/laptops contain users specific
information.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-07-15 11:03:01 -03:00
Mauro Carvalho Chehab 6cf2a73cb2 docs: device-mapper: move it to the admin-guide
The DM support describes lots of aspects related to mapped
disk partitions from the userspace PoV.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:01 -03:00
Mauro Carvalho Chehab 9b1f44028f docs: interconnect.rst: add it to the driver-api guide
This is intended for Kernel hackers audience.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-07-15 09:20:28 -03:00
Mauro Carvalho Chehab 59809fe882 docs: perf: move to the admin-guide
The perf infrastructure is used for userspace to track issues.
At least a good part of what's described here is related to
it.

So, add it to the admin-guide.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 09:20:27 -03:00
Mauro Carvalho Chehab d5ccd65ab6 docs: move gcc_plugins.txt to core-api and rename to .rst
The gcc_plugins.txt file is already a ReST file. Move it
to the core-api book while renaming it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
2019-07-15 09:20:27 -03:00
Mauro Carvalho Chehab 898bd37a92 docs: block: convert to ReST
Rename the block documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 09:20:27 -03:00
Mauro Carvalho Chehab 6baec31591 docs: perf: convert to ReST
Rename the perf documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 09:20:26 -03:00
Mauro Carvalho Chehab 39443104c7 docs: blockdev: convert to ReST
Rename the blockdev documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

The drbd sub-directory contains some graphs and data flows.
Add those too to the documentation.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 09:20:26 -03:00
Mauro Carvalho Chehab b02f1651ff docs: laptops: convert to ReST
Rename the laptops documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-07-15 09:20:25 -03:00
Mauro Carvalho Chehab db9a0975a2 docs: ia64: convert to ReST
Rename the ia64 documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

There are two upper case file names. Rename them to
lower case, as we're working to avoid upper case file
names at Documentation.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 09:20:25 -03:00
Mauro Carvalho Chehab 1945a03554 docs: phy: convert samsung-usb2.txt to ReST format
In order to merge it into a Sphinx book, we need first to
convert to ReST.

While this is not part of any book, mark it as :orphan:, in order
to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 09:20:24 -03:00
Mauro Carvalho Chehab dc7a12bdfc docs: arm: convert docs to ReST and rename to *.rst
Converts ARM the text files to ReST, preparing them to be an
architecture book.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by Corentin Labbe <clabbe.montjoie@gmail.com> # For sun4i-ss
2019-07-15 09:20:24 -03:00
Mauro Carvalho Chehab 6f2846cc2e docs: lp855x-driver.txt: convert to ReST and move to kernel-api
This small file seems to be an attempt to start documenting
backlight drivers.

It contains descriptions of the controls for the driver
with could sound as an somewhat user-faced description, but
it's main focus is to describe, instead, the data that should
be passed via platform data and some driver-specific stuff.

While this is not part of the driver-api book, mark it as
:orphan:, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 09:20:23 -03:00
Mauro Carvalho Chehab 065504d5b4 docs: lcd-panel-cgram.txt: convert docs to ReST and rename to *.rst
This small text file describes the usage of parallel port LCD
displays from userspace PoV. So, a good candidate for the
admin guide.

While this is not part of the admin-guide book, mark it as
:orphan:, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 09:20:23 -03:00
Paolo Bonzini fd4198bf17 KVM: s390: add kselftests
This is the initial implementation for KVM selftests on s390.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJdGfsWAAoJEBF7vIC1phx8MLAP+wWRG6ZBr4K0GJMRVWnudfbD
 Bk/j2s4Oi8V/B8Px5/aa5BEhCzrQVWHxdCGPSdViV3Z8V2HWY0bDOl/Ul2+yaKrx
 IgnQkEJZjLlN8/RZKX9F28MnST05b3EqXhzt7+vSUMcmnWFVFzErWQW9JT1LQVDE
 x/pVlGW/SpLEEdDR22ZEAqQQLuSid+I0RpvWSe7wRTVd0IlIN0X8q70f2yU7Lxpw
 oAVinmZ1fhu6WF1TMPbpL9GJtKMX5I0XqYnw8x9fFGkSWU7NNHzrvnv6ui7jwagG
 tRqKE6vWeCVr+0PDarDOXTM6o5PfskOHXNENAKuCCJk4oGKQM2GTYJ15t5IyTDBl
 qTIR6BccJ8PDudm7Mir6jyFyu89t6C/lsYGvbar4p44GouO4Z5mowUkpLmAMSJgO
 i+gFCeKR9cj2Zz15cjsD2CrsQI6EPa9t3O8T4hsLuSOxRU+oc2plegRZ7i7hLNnw
 075RGRv/hgzC9bUjOtJ3u7Rqny8TSGgNIedg3CujOD2TLYvrCT9CmcibTFlrQpvk
 UBPUNSN+TIqPgvD/5fnEG809EKS0yiqu+8Ihm4b5W6zx8cP3cSoXEcaBuQXCLbQ5
 XVDb4Yji0tMfxP75uCofEE/R2NMvHfkJ72zGvuXv1nSkXSPViQGkmXrWE0ie87hm
 qyilYkncFh3wd6usbhBW
 =STwX
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: add kselftests

This is the initial implementation for KVM selftests on s390.
2019-07-15 13:28:58 +02:00
Christian Brauner 69b53720e9
MAINTAINERS: add new entry for pidfd api
Add me as a maintainer for pidfd stuff so people know who to yell at and
to easily keep track of incoming changes.

Signed-off-by: Christian Brauner <christian@brauner.io>
Link: https://lore.kernel.org/r/20190715003021.25040-1-christian@brauner.io
2019-07-15 12:59:44 +02:00
Linus Torvalds 5516745311 platform-drivers-x86 for v5.3-1
ASUS WMI driver got a big refactoring in order to support the TUF Gaming
 laptops. Besides that, the regression with backlight being permanently off
 on various EeePC laptops has been fixed.
 
 Accelerometer on HP ProBook 450 G0 shows wrong measurements due to
 X axis being inverted. This has been fixed.
 
 Intel PMC core driver has been extended to be ACPI enumerated
 if the DSDT provides device with _HID "INT33A1". This allows
 to convert the driver to be pure platform and support new hardware
 purely based on ACPI DSDT.
 
 From now on the Intel Speed Select Technology is supported thru
 a corresponding driver. This driver provides an access to the features
 of the ISST, such as Performance Profile, Core Power, Base frequency and
 Turbo Frequency.
 
 Mellanox platform drivers has been refactored and now extended
 to support more systems, including new coming ones.
 
 The OLPC XO-1.75 platform is now supported.
 
 CB4063 Beckhoff Automation board is using PMC clocks,
 provided via pmc_atom driver, for ethernet controllers in a way
 that they can't be managed by the clock driver. The quirk
 has been extended to cover this case.
 
 Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile
 the information of Chuwi Hi10 Air has been fixed to cover more models
 based on the same platform.
 
 Xiaomi notebooks have WMI interface enabled. Thus, the driver to support it
 has been provided. It required some extension of the generic WMI library,
 which allows to propagate opaque context to the ->probe() of the
 individual drivers.
 
 This release includes debugfs clean up from Greg KH for several drivers
 that drop return code check and make debugfs absence or failure non-fatal.
 
 Miscellaneous fixes here and there, mostly for Acer WMI and
 various Intel drivers.
 
 The listed below commits are duplicated due to previously pushed fixes in v5.2 cycle:
 - 1dd93f873d platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
 - 89ae3a0736 platform/x86: intel-vbtn: Report switch events when event wakes device
 - fa882fc80d platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration
 - 0bfcd24b39 platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow
 
 The following is an automated git shortlog grouped by driver:
 
 acer-wmi:
  -  Mark expected switch fall-throughs
  -  no need to check return value of debugfs_create functions
 
 asus-nb-wmi:
  -  Add microphone mute key code
 
 asus-wmi:
  -  Use dev_get_drvdata()
  -  Do not disable keyboard backlight on unloading
  -  Switch fan boost mode
  -  Enhance detection of thermal data
  -  Organize code into sections
  -  Refactor error handling
  -  Support WMI event queue
  -  Refactor WMI event handling
  -  Improve DSTS WMI method ID detection
  -  Increase input buffer size of WMI methods
  -  Fix preserving keyboard backlight intensity on load
  -  Fix hwmon device cleanup
  -  no need to check return value of debugfs_create functions
  -  Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
 
 dell-laptop:
  -  no need to check return value of debugfs_create functions
 
 hp_accel:
  -  Add support for HP ProBook 450 G0
 
 ideapad-laptop:
  -  no need to check return value of debugfs_create functions
 
 intel_int0002_vgpio:
  -  Get rid of custom ICPU() macro
 
 intel_menlow:
  -  avoid null pointer deference error
 
 intel_pmc:
  -  no need to check return value of debugfs_create functions
 
 intel_pmc_core:
  -  Attach using APCI HID "INT33A1"
  -  transform Pkg C-state residency from TSC ticks into microseconds
 
 intel_telemetry:
  -  no need to check return value of debugfs_create functions
 
 intel-vbtn:
  -  Report switch events when event wakes device
 
 ISST:
  -  Restore state on resume
  -  Add Intel Speed Select PUNIT MSR interface
  -  Add Intel Speed Select mailbox interface via MSRs
  -  Add Intel Speed Select mailbox interface via PCI
  -  Add Intel Speed Select mmio interface
  -  Add IOCTL to Translate Linux logical CPU to PUNIT CPU number
  -  Store per CPU information
  -  Add common API to register and handle ioctls
  -  Update ioctl-number.txt for Intel Speed Select interface
  -  A tool to validate Intel Speed Select commands
  -  Add .gitignore file
 
 MAINTAINERS:
  -  Update for Intel Speed Select Technology
 
 mlx-platform:
  -  Fix error handling in mlxplat_init()
  -  Add more reset cause attributes
  -  Modify DMI matching order
  -  Add regmap structure for the next generation systems
  -  Change API for i2c-mlxcpld driver activation
  -  Move regmap initialization before all drivers activation
  -  Fix parent device in i2c-mux-reg device registration
  -  Add new attribute for mlxreg-io sysfs interfaces
 
 pcengines-apuv2:
  -  Make two symbols static
  -  Fix PCENGINES_APU2 Kconfig warning
 
 OLPC:
  -  Add a config menu category for XO 1.75
  -  Require CONFIG_POWER_SUPPLY for XO-1.75 EC
  -  Fix olpc_xo175_ec_cmd() return value
  -  Make olpc_dt_compatible_match() static __init
  -  Add INPUT dependencies
  -  Fix build error without CONFIG_SPI
  -  Add a regulator for the DCON
  -  Add XO-1.75 EC driver
  -  Use BIT() and GENMASK() for event masks
  -  Avoid a warning if the EC didn't register yet
  -  Move EC-specific functionality out from x86
  -  Remove an unused include
  -  Add OLPC XO-1.75 EC bindings
 
 platform/mellanox:
  -  mlxreg-hotplug: Add devm_free_irq call to remove flow
 
 pmc_atom:
  -  Add CB4063 Beckhoff Automation board to critclk_systems DMI table
  -  no need to check return value of debugfs_create functions
 
 Kconfig:
  - Remove left-over BACKLIGHT_LCD_SUPPORT
 
 samsung-laptop:
  -  no need to check return value of debugfs_create functions
 
 touchscreen_dmi:
  -  Update Hi10 Air filter
  -  Add info for the CHUWI Hi10 Plus tablet.
 
 wmi:
  -  add Xiaomi WMI key driver
  -  add context argument to the probe function
  -  add context pointer field to struct wmi_device_id
  -  Add function to get _UID of WMI device
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl0rP88ACgkQb7wzTHR8
 rCis8BAAnRgRgi8x1C7xn66gAUHsDXpY0tF9cp/Fw3HyTmFCQkRSmnLkMM2DqGi+
 dvB9U1zPcGWwdwryKFsJXioEK3erYpiYyT2VwLtW4S7P5jQ+N9biT4TZ8yFp0MEr
 MZC50LZDV1JTp1a0GQyrMpfoMBnE7UhR2GL8UbGli/WwXFE5BLkrJ1pdrjhYZOHl
 rJcgq3HPAhV5qkUkIU7gTC2GGSPydjBqk0OhVIU4dPsYwXIb2gXc0yR0QVwKm5x3
 I/NQwBOBMKmdI6uJ8BJyg/p888Strw65YJaTe5wtvG8ljuIbcN/aQ3ZmClNrUnc0
 58byqJCpRhg9HN39VpF9rsApEGxKTlitAUAUKy7lgue7/mycHbA1Syzz29AIM+2v
 ey2/zgFeeWtgh1cuh2cUWlCE6woW7ED4VpDxhkXlX4xGUp+CILEiFqcsULlcc4j5
 sgojCLRPs78roYj9Y84CwYbsd7J/Ce4r2evBpKYPqYxDbUiuH2aVQtEdPTKv9/xC
 yHtBuJJSxY7a+sf4OZONRo13dfvRoZIPjcccR8yTOakS2/1Fqph7MpHyDkwFAfeS
 M2f+OcJn9IECol1391PTLj9Dx3jApyVk21HJdiIj7sKZgJOSS54AFm0/Ywk0MFpY
 XScXKulV48SdL4ZKup5aIpDzyP5zuvXszKQboRitep1dHiR9bl0=
 =DC5j
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:
 "Gathered a bunch of x86 platform driver changes. It's rather big,
  since includes two big refactors and completely new driver:

   - ASUS WMI driver got a big refactoring in order to support the TUF
     Gaming laptops. Besides that, the regression with backlight being
     permanently off on various EeePC laptops has been fixed.

   - Accelerometer on HP ProBook 450 G0 shows wrong measurements due to
     X axis being inverted. This has been fixed.

   - Intel PMC core driver has been extended to be ACPI enumerated if
     the DSDT provides device with _HID "INT33A1". This allows to
     convert the driver to be pure platform and support new hardware
     purely based on ACPI DSDT.

   - From now on the Intel Speed Select Technology is supported thru a
     corresponding driver. This driver provides an access to the
     features of the ISST, such as Performance Profile, Core Power, Base
     frequency and Turbo Frequency.

   - Mellanox platform drivers has been refactored and now extended to
     support more systems, including new coming ones.

   - The OLPC XO-1.75 platform is now supported.

   - CB4063 Beckhoff Automation board is using PMC clocks, provided via
     pmc_atom driver, for ethernet controllers in a way that they can't
     be managed by the clock driver. The quirk has been extended to
     cover this case.

   - Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile
     the information of Chuwi Hi10 Air has been fixed to cover more
     models based on the same platform.

   - Xiaomi notebooks have WMI interface enabled. Thus, the driver to
     support it has been provided. It required some extension of the
     generic WMI library, which allows to propagate opaque context to
     the ->probe() of the individual drivers.

  This release includes debugfs clean up from Greg KH for several
  drivers that drop return code check and make debugfs absence or
  failure non-fatal.

  Also miscellaneous fixes here and there, mostly for Acer WMI and
  various Intel drivers"

* tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
  platform/x86: Fix PCENGINES_APU2 Kconfig warning
  tools/power/x86/intel-speed-select: Add .gitignore file
  platform/x86: mlx-platform: Fix error handling in mlxplat_init()
  platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1"
  platform/x86: intel_pmc_core: transform Pkg C-state residency from TSC ticks into microseconds
  platform/x86: asus-wmi: Use dev_get_drvdata()
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Add more reset cause attributes
  platform/x86: mlx-platform: Modify DMI matching order
  platform/x86: mlx-platform: Add regmap structure for the next generation systems
  platform/x86: mlx-platform: Change API for i2c-mlxcpld driver activation
  platform/x86: mlx-platform: Move regmap initialization before all drivers activation
  MAINTAINERS: Update for Intel Speed Select Technology
  tools/power/x86: A tool to validate Intel Speed Select commands
  platform/x86: ISST: Restore state on resume
  platform/x86: ISST: Add Intel Speed Select PUNIT MSR interface
  platform/x86: ISST: Add Intel Speed Select mailbox interface via MSRs
  platform/x86: ISST: Add Intel Speed Select mailbox interface via PCI
  platform/x86: ISST: Add Intel Speed Select mmio interface
  platform/x86: ISST: Add IOCTL to Translate Linux logical CPU to PUNIT CPU number
  ...
2019-07-14 16:51:47 -07:00
Linus Torvalds 3f06962273 This pull-request contains the following changes for MTD:
MTD core changes:
 - New Hyperbus framework
 - New _is_locked (concat) implementation
 - Various cleanups
 
 NAND core changes:
 - use longest matching pattern in ->exec_op() default parser
 - export NAND operation tracer
 - add flag to indicate panic_write in MTD
 - use kzalloc() instead of kmalloc() and memset()
 
 Raw NAND controller drivers changes:
 - brcmnand:
   * fix BCH ECC layout for large page NAND parts
   * fallback to detected ecc-strength, ecc-step-size
   * when oops in progress use pio and interrupt polling
   * code refactor code to introduce helper functions
   * add support for v7.3 controller
 - FSMC:
   * use nand_op_trace for operation tracing
 - GPMI:
   * move all driver code into single file
   * various cleanups (including dmaengine changes)
   * use runtime PM to manage clocks
   * implement exec_op
 - MTK:
   * correct low level time calculation of r/w cycle
   * improve data sampling timing for read cycle
   * add validity check for CE# pin setting
   * fix wrongly assigned OOB buffer pointer issue
   * re-license MTK NAND driver as Dual MIT/GPL
 - STM32:
   * manage the get_irq error case
   * increase DMA completion timeouts
 
 Raw NAND chips drivers changes:
 - Macronix: add read-retry support
 
 Onenand driver changes:
 - add support for 8Gb datasize chips
 - avoid fall-through warnings
 
 SPI-NAND changes:
 - define macros for page-read ops with three-byte addresses
 - add support for two-byte device IDs and then for GigaDevice
   GD5F1GQ4UFxxG
 - add initial support for Paragon PN26G0xA
 - handle the case where the last page read has bitflips
 
 SPI-NOR core changes:
 - add support for the mt25ql02g and w25q16jv flashes
 - print error in case of jedec read id fails
 - is25lp256: add post BFPT fix to correct the addr_width
 
 SPI NOR controller drivers changes:
 - intel-spi: Add support for Intel Elkhart Lake SPI serial flash
 - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
 - cadence-quadspi: add reset control
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl0qLr4ACgkQJWrqGEe9
 VoQVCwf/ZCG5CldS3cs6B68kMJoZ/rJyJxBnxtIhffda2vw1KG/12o6XaDO9xA/R
 EwYrOTzlYZxzCZsNvWyHepG3Kj3d38CJ52ZqhavjpihwMlKKOgW/K39xuKWCrfxS
 sVMLz/UdrcsQfcPGAy7DSyqhzRAtupNxngCdEkIIMGFZWsv4uZfOFEGMrzUJ5RYN
 /okIyUE7Iz0dRq1/KXSl365V1MS8QP2eHFuHrUd38+kJ8TJnQjXX3Bmdul4aNTx+
 HIIpykovoAn5BZ0YA4lJL90zVoDOWysARwHIAMDvJa8zS0wDTU16Tj2M6AQK+a4x
 hbIOOkeX0hTKpJvy7/khli5y1bn2mw==
 =L+tV
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "This contains the following changes for MTD:

  MTD core changes:
   - New Hyperbus framework
   - New _is_locked (concat) implementation
   - Various cleanups

  NAND core changes:
   - use longest matching pattern in ->exec_op() default parser
   - export NAND operation tracer
   - add flag to indicate panic_write in MTD
   - use kzalloc() instead of kmalloc() and memset()

  Raw NAND controller drivers changes:
   - brcmnand:
       - fix BCH ECC layout for large page NAND parts
       - fallback to detected ecc-strength, ecc-step-size
       - when oops in progress use pio and interrupt polling
       - code refactor code to introduce helper functions
       - add support for v7.3 controller
   - FSMC:
       - use nand_op_trace for operation tracing
   - GPMI:
       - move all driver code into single file
       - various cleanups (including dmaengine changes)
       - use runtime PM to manage clocks
       - implement exec_op
   - MTK:
       - correct low level time calculation of r/w cycle
       - improve data sampling timing for read cycle
       - add validity check for CE# pin setting
       - fix wrongly assigned OOB buffer pointer issue
       - re-license MTK NAND driver as Dual MIT/GPL
   - STM32:
       - manage the get_irq error case
       - increase DMA completion timeouts

  Raw NAND chips drivers changes:
   - Macronix: add read-retry support

  Onenand driver changes:
   - add support for 8Gb datasize chips
   - avoid fall-through warnings

  SPI-NAND changes:
   - define macros for page-read ops with three-byte addresses
   - add support for two-byte device IDs and then for GigaDevice
     GD5F1GQ4UFxxG
   - add initial support for Paragon PN26G0xA
   - handle the case where the last page read has bitflips

  SPI-NOR core changes:
   - add support for the mt25ql02g and w25q16jv flashes
   - print error in case of jedec read id fails
   - is25lp256: add post BFPT fix to correct the addr_width

  SPI NOR controller drivers changes:
   - intel-spi: Add support for Intel Elkhart Lake SPI serial flash
   - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
   - cadence-quadspi: add reset control"

* tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits)
  mtd: concat: implement _is_locked mtd operation
  mtd: concat: refactor concat_lock/concat_unlock
  mtd: abi: do not use C++ style comments in uapi header
  mtd: afs: remove unneeded NULL check
  mtd: rawnand: stm32_fmc2: increase DMA completion timeouts
  mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()
  mtd: hyperbus: Add driver for TI's HyperBus memory controller
  mtd: spinand: read returns badly if the last page has bitflips
  mtd: spinand: Add initial support for Paragon PN26G0xA
  mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL
  mtd: rawnand: gpmi: remove double assignment to block_size
  dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support
  mtd: rawnand: brcmnand: Add support for v7.3 controller
  mtd: rawnand: brcmnand: Refactored code to introduce helper functions
  mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling
  mtd: Add flag to indicate panic_write
  mtd: rawnand: Add Macronix NAND read retry support
  mtd: onenand: Avoid fall-through warnings
  mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
  mtd: spinand: Add support for two-byte device IDs
  ...
2019-07-13 15:42:44 -07:00
Linus Torvalds 43c95d3694 This is the bulk of pin control changes for the v5.3 kernel
cycle:
 
 Core changes:
 
 - Device links can optionally be added between a pin control
   producer and its consumers. This will affect how the system
   power management is handled: a pin controller will not suspend
   before all of its consumers have been suspended. This was
   necessary for the ST Microelectronics STMFX expander and
   need to be tested on other systems as well: it makes sense
   to make this default in the long run. Right now it is
   opt-in per driver.
 
 - Drive strength can be specified in microamps. With decreases
   in silicon technology, milliamps isn't granular enough, let's
   make it possible to select drive strengths in microamps. Right
   now the Meson (AMlogic) driver needs this.
 
 New drivers:
 
 - New subdriver for the Tegra 194 SoC.
 
 - New subdriver for the Qualcomm SDM845.
 
 - New subdriver for the Qualcomm SM8150.
 
 - New subdriver for the Freescale i.MX8MN (Freescale is now a
   product line of NXP).
 
 - New subdriver for Marvell MV98DX1135.
 
 Driver improvements:
 
 - The Bitmain BM1880 driver now supports pin config in
   addition to muxing.
 
 - The Qualcomm drivers can now reserve some GPIOs as taken
   aside and not usable for users. This is used in ACPI systems
   to take out some GPIO lines used by the BIOS so that
   noone else (neither kernel nor userspace) will play with them
   by mistake and crash the machine.
 
 - A slew of refurbishing around the Aspeed drivers (board
   management controllers for servers) in preparation for the
   new Aspeed AST2600 SoC.
 
 - A slew of improvements over the SH PFC drivers as usual.
 
 - Misc cleanups and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl0oTPcACgkQQRCzN7AZ
 XXNTsw//aNPfkJS8gRszv58G56lyuO8h6Cq4m5eDpzhlpjx5qjELgi9h2UNGINqD
 7CWxo35ufbKe0fDIcqpXmtuDMtSu6MuKT3SMepuw9uf9wxyndK4RIuyb0lpAJrx2
 +NMPxzS+ARlrMmcfvXPRyPWHqAkXsQk6zcCgiuNCPtROkOZgs1YZ3+pemZw2/FMq
 gSLTO/95p0TPWr6YAlpByqfsA1A/onEm9HOiU2INV7DrAfUj7mnkuC1nZ4IJDFcv
 Gn6qQVQPah+MBzkwt4WXy5kDRozCIbg7x+FQBw3KAO23TrLDTFuNsYIWGFcP2CN2
 eT8iSP3cWrXNUuEgcPD59aO07rhFooT+QBQFt2ih1dJCV1u/795wb57nxSh1YDcO
 M2tG+AW2EZky65FXwhLW2rq3LvmTM4kiEz3mA/DrcOAKvvQllK+6FKEhNy0StstP
 yvvlqoXdgH3sfOnWTAyHr35qA/pMuGEXSryWTJPqpflCvZ3wxNk+IV5nyPAtfaFz
 CK7U0Ya7NaEp/5ZlpE720apJ4uSqmRrLwk5Y1eKQvT46mGOk3rC9ZPIMXc8mB10/
 mJ9mTubi1t4uIPnBl/T1T7f8QhNtr9hOY6wjLf1LoMeJ1XVNBqA+2uydOlBJ1iop
 RQ7y/Jl1SZ/gBzKCmvjPHT2+0Oui9oXGd9bQi0xQKO5Lus/nAIg=
 =Wdw1
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.3 kernel cycle:

  Core changes:

   - Device links can optionally be added between a pin control producer
     and its consumers. This will affect how the system power management
     is handled: a pin controller will not suspend before all of its
     consumers have been suspended.

     This was necessary for the ST Microelectronics STMFX expander and
     need to be tested on other systems as well: it makes sense to make
     this default in the long run.

     Right now it is opt-in per driver.

   - Drive strength can be specified in microamps. With decreases in
     silicon technology, milliamps isn't granular enough, let's make it
     possible to select drive strengths in microamps.

     Right now the Meson (AMlogic) driver needs this.

  New drivers:

   - New subdriver for the Tegra 194 SoC.

   - New subdriver for the Qualcomm SDM845.

   - New subdriver for the Qualcomm SM8150.

   - New subdriver for the Freescale i.MX8MN (Freescale is now a product
     line of NXP).

   - New subdriver for Marvell MV98DX1135.

  Driver improvements:

   - The Bitmain BM1880 driver now supports pin config in addition to
     muxing.

   - The Qualcomm drivers can now reserve some GPIOs as taken aside and
     not usable for users. This is used in ACPI systems to take out some
     GPIO lines used by the BIOS so that noone else (neither kernel nor
     userspace) will play with them by mistake and crash the machine.

   - A slew of refurbishing around the Aspeed drivers (board management
     controllers for servers) in preparation for the new Aspeed AST2600
     SoC.

   - A slew of improvements over the SH PFC drivers as usual.

   - Misc cleanups and fixes"

* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
  pinctrl: aspeed: Strip moved macros and structs from private header
  pinctrl: aspeed: Fix missed include
  pinctrl: baytrail: Use GENMASK() consistently
  pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
  pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
  pinctrl: qcom: Add SM8150 pinctrl driver
  dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
  dt-bindings: pinctrl: qcom: Document missing gpio nodes
  pinctrl: aspeed: Add implementation-related documentation
  pinctrl: aspeed: Split out pinmux from general pinctrl
  pinctrl: aspeed: Clarify comment about strapping W1C
  pinctrl: aspeed: Correct comment that is no longer true
  MAINTAINERS: Add entry for ASPEED pinctrl drivers
  dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
  dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
  dt-bindings: pinctrl: aspeed: Split bindings document in two
  pinctrl: qcom: Add irq_enable callback for msm gpio
  pinctrl: madera: Fixup SPDX headers
  pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
  pinctrl: tegra: Add bitmask support for parked bits
  ...
2019-07-13 15:02:27 -07:00
Linus Torvalds 4ce9d181eb New stuff for 5.3:
- Refactor inode geometry calculation into a single structure instead of
   open-coding pieces everywhere.
 - Add online repair to build options.
 - Remove unnecessary function call flags and functions.
 - Claim maintainership of various loose xfs documentation and header
   files.
 - Use struct bio directly for log buffer IOs instead of struct xfs_buf.
 - Reduce log item boilerplate code requirements.
 - Merge log item code spread across too many files.
 - Further distinguish between log item commits and cancellations.
 - Various small cleanups to the ag small allocator.
 - Support cgroup-aware writeback
 - libxfs refactoring for mkfs cleanup
 - Remove unneeded #includes
 - Fix a memory allocation miscalculation in the new log bio code
 - Fix bisection problems
 - Fix a crash in ioend processing caused by tripping over freeing of
   preallocated transactions
 - Split out a generic inode walk mechanism from the bulkstat code, hook
   up all the internal users to use the walking code, then clean up
   bulkstat to serve only the bulkstat ioctls.
 - Add a multithreaded iwalk implementation to speed up quotacheck on
   fast storage with many CPUs.
 - Remove unnecessary return values in logging teardown functions.
 - Supplement the bstat and inogrp structures with new bulkstat and
   inumbers structures that have all the fields we need for v5
   filesystem features and none of the padding problems of their
   predecessors.
 - Wire up new ioctls that use the new structures with a much simpler
   bulk_ireq structure at the head instead of the pointerhappy mess we
   had before.
 - Enable userspace to constrain bulkstat returns to a single AG or a
   single special inode so that we can phase out a lot of geometry
   guesswork in userspace.
 - Reduce memory consumption and zeroing overhead in extended attribute
   scrub code.
 - Fix some behavioral regressions in the new bulkstat backend code.
 - Fix some behavioral regressions in the new log bio code.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl0mGqwACgkQ+H93GTRK
 tOvUGA//d9+SVDaisbFzwxQVHX2/MPJExKA56kFE4PvSQhIpvPZeGNXUXCZfQXGt
 Hkwm/uEVUdndH9ERo8Z4L2nmT1WQCt3ONUihHn/aE8NSh/g1Bb1J+/t2Wr+Cdqic
 sgU5imhEoMTh0cknoFcGg9PdAJ7ZOv4mr2wzDrj3odq0etP63U+zabxxlX2Lg0VW
 3EXu6YhY+bmq54jdyc4xIL930opfYC64FDVmG7iNK4xlX1M2wJjdEGEP5fEchxf8
 XgsWgJqxRyxJWVH3KTbpXREQkrbj+uDM8MqqFF9uYzjUt2UHc9H206BxJCUfWo7/
 HGhTQmWqXmYMlA+ngEhJ3lcwsgAmHnnLL4YczbprgrQcwIbxMkpw2leEWUGOiLhH
 HdNCnJNVgPcAtmjjDxENqGUR19qslrexgSH2eUrFZFM15/3GHMYT3wdEHyqiZDya
 LiTHllcLDvauUmv8df51jJ+l5dd2Zj9c5iLQUOV5nRGVUj7Fyi7kAuFL+4SVcIbI
 VJVFgtHKsSwKYRPMqb7iTtDnTHkwZNTtQQ1Ptpe+TUH5ngTmqNn5EQVeoUtG6HUi
 0xEaA2MrhoA3VkHk1zFfzStlR8g1YsX5ajBq7luotYY+i3cC4oHLlrvIx9zI7elI
 WMc6Wnn7ozetwehYROVXvgsV+wiqC4D7yWGsnFyhqaS1QakwIM0=
 =VEdn
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.3-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs updates from Darrick Wong:
 "In this release there are a significant amounts of consolidations and
  cleanups in the log code; restructuring of the log to issue struct
  bios directly; new bulkstat ioctls to return v5 fs inode information
  (and fix all the padding problems of the old ioctl); the beginnings of
  multithreaded inode walks (e.g. quotacheck); and a reduction in memory
  usage in the online scrub code leading to reduced runtimes.

   - Refactor inode geometry calculation into a single structure instead
     of open-coding pieces everywhere.

   - Add online repair to build options.

   - Remove unnecessary function call flags and functions.

   - Claim maintainership of various loose xfs documentation and header
     files.

   - Use struct bio directly for log buffer IOs instead of struct
     xfs_buf.

   - Reduce log item boilerplate code requirements.

   - Merge log item code spread across too many files.

   - Further distinguish between log item commits and cancellations.

   - Various small cleanups to the ag small allocator.

   - Support cgroup-aware writeback

   - libxfs refactoring for mkfs cleanup

   - Remove unneeded #includes

   - Fix a memory allocation miscalculation in the new log bio code

   - Fix bisection problems

   - Fix a crash in ioend processing caused by tripping over freeing of
     preallocated transactions

   - Split out a generic inode walk mechanism from the bulkstat code,
     hook up all the internal users to use the walking code, then clean
     up bulkstat to serve only the bulkstat ioctls.

   - Add a multithreaded iwalk implementation to speed up quotacheck on
     fast storage with many CPUs.

   - Remove unnecessary return values in logging teardown functions.

   - Supplement the bstat and inogrp structures with new bulkstat and
     inumbers structures that have all the fields we need for v5
     filesystem features and none of the padding problems of their
     predecessors.

   - Wire up new ioctls that use the new structures with a much simpler
     bulk_ireq structure at the head instead of the pointerhappy mess we
     had before.

   - Enable userspace to constrain bulkstat returns to a single AG or a
     single special inode so that we can phase out a lot of geometry
     guesswork in userspace.

   - Reduce memory consumption and zeroing overhead in extended
     attribute scrub code.

   - Fix some behavioral regressions in the new bulkstat backend code.

   - Fix some behavioral regressions in the new log bio code"

* tag 'xfs-5.3-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (100 commits)
  xfs: chain bios the right way around in xfs_rw_bdev
  xfs: bump INUMBERS cursor correctly in xfs_inumbers_walk
  xfs: don't update lastino for FSBULKSTAT_SINGLE
  xfs: online scrub needn't bother zeroing its temporary buffer
  xfs: only allocate memory for scrubbing attributes when we need it
  xfs: refactor attr scrub memory allocation function
  xfs: refactor extended attribute buffer pointer functions
  xfs: attribute scrub should use seen_enough to pass error values
  xfs: allow single bulkstat of special inodes
  xfs: specify AG in bulk req
  xfs: wire up the v5 inumbers ioctl
  xfs: wire up new v5 bulkstat ioctls
  xfs: introduce v5 inode group structure
  xfs: introduce new v5 bulkstat structure
  xfs: rename bulkstat functions
  xfs: remove various bulk request typedef usage
  fs: xfs: xfs_log: Change return type from int to void
  xfs: poll waiting for quotacheck
  xfs: multithreaded iwalk implementation
  xfs: refactor INUMBERS to use iwalk functions
  ...
2019-07-12 17:17:51 -07:00
Linus Torvalds 5f26f11436 asm-generic: remove ptrace.h
The asm-generic changes for 5.3 consist of a cleanup series from
 Christoph Hellwig, who explains:
 
 "asm-generic/ptrace.h is a little weird in that it doesn't actually
 implement any functionality, but it provided multiple layers of macros
 that just implement trivial inline functions.  We implement those
 directly in the few architectures and be off with a much simpler
 design."
 
 Link: https://lore.kernel.org/lkml/20190624054728.30966-1-hch@lst.de/
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdKPURAAoJEJpsee/mABjZalgP/idFZKlL9jb32p9eVacW1ngm
 CzwKk+49UBpLlimTh3ZtpiSJEHQyXP/QYlJ0/kV65YJriq5FsqlBrkPnWgsgMG9x
 HBhJEEfVtXolXK3yNEsFIt/0j0Xh7+uCyBNZNuJrIRy/9x2z2nhBgDAenWPpZNuT
 qjpArBAVEWQMsWgmgZUlCKOT7ziSx5+w1bfqiiUZDjwjqimPhLUBfoZmUWHtO49M
 4/95RVOIMoLlIcaCUfqsvfkf7v6mfFAADhTrB/FZWVNX839fnpifqQL9BmOlgrEM
 kxn5wM/dxRDwRT8+mVRyB8ax4/rIgMIFoaA7Hrv+hoUsiOVD7AkNXynZKQh1hhjl
 449j68esoA6vlfdFIhagpKKTiQcWXJDbEgAoSJcM0WIl3JAjc+3nVWShTAAEW65r
 Z+Bgy1OczoCsRXbYR/TwpThHj3197xMRQEluzaLnd5Zx5feUDUKuDcxhPpev/ceO
 qmV5FeGqxRlZhJjVK8lmcHNZP0e4pkodwrNKC/2NIlIp6EKmMNI0nCjVqINigHGC
 97Kc7N94WHdQ3tA7GB8YaUfd8w86W5ZOgRh+uuZ0brPziL1MR5lD/NvzjVSfyvVp
 7UHNP7stNbavg20vDhlWGIsWiwoDlJf0YLUA6kXHryb9i/fh8sqWjz99QFu6QIfs
 BTgeLtNP8hKhMkgew2XL
 =jkfI
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic changes for 5.3 consist of a cleanup series to remove
  ptrace.h from Christoph Hellwig, who explains:

    'asm-generic/ptrace.h is a little weird in that it doesn't actually
     implement any functionality, but it provided multiple layers of
     macros that just implement trivial inline functions. We implement
     those directly in the few architectures and be off with a much
     simpler design.'

  at https://lore.kernel.org/lkml/20190624054728.30966-1-hch@lst.de/"

* tag 'asm-generic-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: remove ptrace.h
  x86: don't use asm-generic/ptrace.h
  sh: don't use asm-generic/ptrace.h
  powerpc: don't use asm-generic/ptrace.h
  arm64: don't use asm-generic/ptrace.h
2019-07-12 15:41:33 -07:00
Linus Torvalds 16c97650a5 - Add a module description to the Hyper-V vmbus module.
- Rework some vmbus code to separate architecture specifics out to
 arch/x86/. This is part of the work of adding arm64 support to Hyper-V.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAl0nfBEACgkQ3qZv95d3
 LNyf8Q//fn+Eb+Pun3a5Cus8qYBQIYrVpt/bUmMuisV8A+MdRIOSwUU/oEbzCEwa
 RhKKGKkNSkItKHz0QyqC9FwHZ18+6iLmSF1VwHzKVV+GJ1kQqI9+r4dC23yO/OCz
 cuB6Uc+Jd7eLV9021U0jgmYI2HOLOfd5IUNqnyxuw6BPYYaJhrf3J9qSnlKmJ2tW
 qhzSfKC2nn0+QbYSC5ww990o10vPMw3mcoXu23HKOU7Q2aqKkdK0HWjNrv49eent
 NPbtjFoSABSVS+4eTzW1BrK2Rkwa+TVpAC75a4OPOd4KPUvibqCWjmEl8IE55Pre
 BXwUoZnZN5cC1ayUGYuhyOmzFJtwxSWqgXlZRrmr+/XDgNk4k4V2bv253yFegZw2
 1hMTbGwYrk4MrGNQB3YvnzJz8ObrTmNR98JvJz/bKPtHKmKmIbHcCWkR5gYAApuy
 cY9PqKR5wWQ5A+leePzpXIXDtWlDHy7SDhUU14mbEj2bvQ3tC0yodHabpzl0Lx8e
 feXGuqt/g5Lop+KGcRJj32tx23JBRkwfgIyagfRAdzVCs4urp9pt+tKezPkEpWW6
 dd+Gc43Rnjd94neTCoo1seS9KH7n56ldnmeygMEDzI0rgW0q1m/Qwys0+6BIQR2G
 lmcL1qJlquy3Fjfs1aYkkPqkQYoIqDwGQivSUgIDZ0TLBIsWAfY=
 =wIj3
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyper-v updates from Sasha Levin:

 - Add a module description to the Hyper-V vmbus module.

 - Rework some vmbus code to separate architecture specifics out to
   arch/x86/. This is part of the work of adding arm64 support to
   Hyper-V.

* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: Break out ISA independent parts of mshyperv.h
  drivers: hv: Add a module description line to the hv_vmbus driver
2019-07-12 15:28:38 -07:00
Linus Torvalds ef8f3d48af Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:
 "Am experimenting with splitting MM up into identifiable subsystems
  perhaps with a view to gitifying it in complex ways. Also with more
  verbose "incoming" emails.

  Most of MM is here and a few other trees.

  Subsystems affected by this patch series:
   - hotfixes
   - iommu
   - scripts
   - arch/sh
   - ocfs2
   - mm:slab-generic
   - mm:slub
   - mm:kmemleak
   - mm:kasan
   - mm:cleanups
   - mm:debug
   - mm:pagecache
   - mm:swap
   - mm:memcg
   - mm:gup
   - mm:pagemap
   - mm:infrastructure
   - mm:vmalloc
   - mm:initialization
   - mm:pagealloc
   - mm:vmscan
   - mm:tools
   - mm:proc
   - mm:ras
   - mm:oom-kill

  hotfixes:
      mm: vmscan: scan anonymous pages on file refaults
      mm/nvdimm: add is_ioremap_addr and use that to check ioremap address
      mm/memcontrol: fix wrong statistics in memory.stat
      mm/z3fold.c: lock z3fold page before  __SetPageMovable()
      nilfs2: do not use unexported cpu_to_le32()/le32_to_cpu() in uapi header
      MAINTAINERS: nilfs2: update email address

  iommu:
      include/linux/dmar.h: replace single-char identifiers in macros

  scripts:
      scripts/decode_stacktrace: match basepath using shell prefix operator, not regex
      scripts/decode_stacktrace: look for modules with .ko.debug extension
      scripts/spelling.txt: drop "sepc" from the misspelling list
      scripts/spelling.txt: add spelling fix for prohibited
      scripts/decode_stacktrace: Accept dash/underscore in modules
      scripts/spelling.txt: add more spellings to spelling.txt

  arch/sh:
      arch/sh/configs/sdk7786_defconfig: remove CONFIG_LOGFS
      sh: config: remove left-over BACKLIGHT_LCD_SUPPORT
      sh: prevent warnings when using iounmap

  ocfs2:
      fs: ocfs: fix spelling mistake "hearbeating" -> "heartbeat"
      ocfs2/dlm: use struct_size() helper
      ocfs2: add last unlock times in locking_state
      ocfs2: add locking filter debugfs file
      ocfs2: add first lock wait time in locking_state
      ocfs: no need to check return value of debugfs_create functions
      fs/ocfs2/dlmglue.c: unneeded variable: "status"
      ocfs2: use kmemdup rather than duplicating its implementation

  mm:slab-generic:
    Patch series "mm/slab: Improved sanity checking":
      mm/slab: validate cache membership under freelist hardening
      mm/slab: sanity-check page type when looking up cache
      lkdtm/heap: add tests for freelist hardening

  mm:slub:
      mm/slub.c: avoid double string traverse in kmem_cache_flags()
      slub: don't panic for memcg kmem cache creation failure

  mm:kmemleak:
      mm/kmemleak.c: fix check for softirq context
      mm/kmemleak.c: change error at _write when kmemleak is disabled
      docs: kmemleak: add more documentation details

  mm:kasan:
      mm/kasan: print frame description for stack bugs
      Patch series "Bitops instrumentation for KASAN", v5:
        lib/test_kasan: add bitops tests
        x86: use static_cpu_has in uaccess region to avoid instrumentation
        asm-generic, x86: add bitops instrumentation for KASAN
      Patch series "mm/kasan: Add object validation in ksize()", v3:
        mm/kasan: introduce __kasan_check_{read,write}
        mm/kasan: change kasan_check_{read,write} to return boolean
        lib/test_kasan: Add test for double-kzfree detection
        mm/slab: refactor common ksize KASAN logic into slab_common.c
        mm/kasan: add object validation in ksize()

  mm:cleanups:
      include/linux/pfn_t.h: remove pfn_t_to_virt()
      Patch series "remove ARCH_SELECT_MEMORY_MODEL where it has no effect":
        arm: remove ARCH_SELECT_MEMORY_MODEL
        s390: remove ARCH_SELECT_MEMORY_MODEL
        sparc: remove ARCH_SELECT_MEMORY_MODEL
      mm/gup.c: make follow_page_mask() static
      mm/memory.c: trivial clean up in insert_page()
      mm: make !CONFIG_HUGE_PAGE wrappers into static inlines
      include/linux/mm_types.h: ifdef struct vm_area_struct::swap_readahead_info
      mm: remove the account_page_dirtied export
      mm/page_isolation.c: change the prototype of undo_isolate_page_range()
      include/linux/vmpressure.h: use spinlock_t instead of struct spinlock
      mm: remove the exporting of totalram_pages
      include/linux/pagemap.h: document trylock_page() return value

  mm:debug:
      mm/failslab.c: by default, do not fail allocations with direct reclaim only
      Patch series "debug_pagealloc improvements":
        mm, debug_pagelloc: use static keys to enable debugging
        mm, page_alloc: more extensive free page checking with debug_pagealloc
        mm, debug_pagealloc: use a page type instead of page_ext flag

  mm:pagecache:
      Patch series "fix filler_t callback type mismatches", v2:
        mm/filemap.c: fix an overly long line in read_cache_page
        mm/filemap: don't cast ->readpage to filler_t for do_read_cache_page
        jffs2: pass the correct prototype to read_cache_page
        9p: pass the correct prototype to read_cache_page
      mm/filemap.c: correct the comment about VM_FAULT_RETRY

  mm:swap:
      mm, swap: fix race between swapoff and some swap operations
      mm/swap_state.c: simplify total_swapcache_pages() with get_swap_device()
      mm, swap: use rbtree for swap_extent
      mm/mincore.c: fix race between swapoff and mincore

  mm:memcg:
      memcg, oom: no oom-kill for __GFP_RETRY_MAYFAIL
      memcg, fsnotify: no oom-kill for remote memcg charging
      mm, memcg: introduce memory.events.local
      mm: memcontrol: dump memory.stat during cgroup OOM
      Patch series "mm: reparent slab memory on cgroup removal", v7:
        mm: memcg/slab: postpone kmem_cache memcg pointer initialization to memcg_link_cache()
        mm: memcg/slab: rename slab delayed deactivation functions and fields
        mm: memcg/slab: generalize postponed non-root kmem_cache deactivation
        mm: memcg/slab: introduce __memcg_kmem_uncharge_memcg()
        mm: memcg/slab: unify SLAB and SLUB page accounting
        mm: memcg/slab: don't check the dying flag on kmem_cache creation
        mm: memcg/slab: synchronize access to kmem_cache dying flag using a spinlock
        mm: memcg/slab: rework non-root kmem_cache lifecycle management
        mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages
        mm: memcg/slab: reparent memcg kmem_caches on cgroup removal
      mm, memcg: add a memcg_slabinfo debugfs file

  mm:gup:
      Patch series "switch the remaining architectures to use generic GUP", v4:
        mm: use untagged_addr() for get_user_pages_fast addresses
        mm: simplify gup_fast_permitted
        mm: lift the x86_32 PAE version of gup_get_pte to common code
        MIPS: use the generic get_user_pages_fast code
        sh: add the missing pud_page definition
        sh: use the generic get_user_pages_fast code
        sparc64: add the missing pgd_page definition
        sparc64: define untagged_addr()
        sparc64: use the generic get_user_pages_fast code
        mm: rename CONFIG_HAVE_GENERIC_GUP to CONFIG_HAVE_FAST_GUP
        mm: reorder code blocks in gup.c
        mm: consolidate the get_user_pages* implementations
        mm: validate get_user_pages_fast flags
        mm: move the powerpc hugepd code to mm/gup.c
        mm: switch gup_hugepte to use try_get_compound_head
        mm: mark the page referenced in gup_hugepte
      mm/gup: speed up check_and_migrate_cma_pages() on huge page
      mm/gup.c: remove some BUG_ONs from get_gate_page()
      mm/gup.c: mark undo_dev_pagemap as __maybe_unused

  mm:pagemap:
      asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel]
      alpha: switch to generic version of pte allocation
      arm: switch to generic version of pte allocation
      arm64: switch to generic version of pte allocation
      csky: switch to generic version of pte allocation
      m68k: sun3: switch to generic version of pte allocation
      mips: switch to generic version of pte allocation
      nds32: switch to generic version of pte allocation
      nios2: switch to generic version of pte allocation
      parisc: switch to generic version of pte allocation
      riscv: switch to generic version of pte allocation
      um: switch to generic version of pte allocation
      unicore32: switch to generic version of pte allocation
      mm/pgtable: drop pgtable_t variable from pte_fn_t functions
      mm/memory.c: fail when offset == num in first check of __vm_map_pages()

  mm:infrastructure:
      mm/mmu_notifier: use hlist_add_head_rcu()

  mm:vmalloc:
      Patch series "Some cleanups for the KVA/vmalloc", v5:
        mm/vmalloc.c: remove "node" argument
        mm/vmalloc.c: preload a CPU with one object for split purpose
        mm/vmalloc.c: get rid of one single unlink_va() when merge
        mm/vmalloc.c: switch to WARN_ON() and move it under unlink_va()
      mm/vmalloc.c: spelling> s/informaion/information/

  mm:initialization:
      mm/large system hash: use vmalloc for size > MAX_ORDER when !hashdist
      mm/large system hash: clear hashdist when only one node with memory is booted

  mm:pagealloc:
      arm64: move jump_label_init() before parse_early_param()
      Patch series "add init_on_alloc/init_on_free boot options", v10:
        mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options
        mm: init: report memory auto-initialization features at boot time

  mm:vmscan:
      mm: vmscan: remove double slab pressure by inc'ing sc->nr_scanned
      mm: vmscan: correct some vmscan counters for THP swapout

  mm:tools:
      tools/vm/slabinfo: order command line options
      tools/vm/slabinfo: add partial slab listing to -X
      tools/vm/slabinfo: add option to sort by partial slabs
      tools/vm/slabinfo: add sorting info to help menu

  mm:proc:
      proc: use down_read_killable mmap_sem for /proc/pid/maps
      proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup
      proc: use down_read_killable mmap_sem for /proc/pid/pagemap
      proc: use down_read_killable mmap_sem for /proc/pid/clear_refs
      proc: use down_read_killable mmap_sem for /proc/pid/map_files
      mm: use down_read_killable for locking mmap_sem in access_remote_vm
      mm: smaps: split PSS into components
      mm: vmalloc: show number of vmalloc pages in /proc/meminfo

  mm:ras:
      mm/memory-failure.c: clarify error message

  mm:oom-kill:
      mm: memcontrol: use CSS_TASK_ITER_PROCS at mem_cgroup_scan_tasks()
      mm, oom: refactor dump_tasks for memcg OOMs
      mm, oom: remove redundant task_in_mem_cgroup() check
      oom: decouple mems_allowed from oom_unkillable_task
      mm/oom_kill.c: remove redundant OOM score normalization in select_bad_process()"

* akpm: (147 commits)
  mm/oom_kill.c: remove redundant OOM score normalization in select_bad_process()
  oom: decouple mems_allowed from oom_unkillable_task
  mm, oom: remove redundant task_in_mem_cgroup() check
  mm, oom: refactor dump_tasks for memcg OOMs
  mm: memcontrol: use CSS_TASK_ITER_PROCS at mem_cgroup_scan_tasks()
  mm/memory-failure.c: clarify error message
  mm: vmalloc: show number of vmalloc pages in /proc/meminfo
  mm: smaps: split PSS into components
  mm: use down_read_killable for locking mmap_sem in access_remote_vm
  proc: use down_read_killable mmap_sem for /proc/pid/map_files
  proc: use down_read_killable mmap_sem for /proc/pid/clear_refs
  proc: use down_read_killable mmap_sem for /proc/pid/pagemap
  proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup
  proc: use down_read_killable mmap_sem for /proc/pid/maps
  tools/vm/slabinfo: add sorting info to help menu
  tools/vm/slabinfo: add option to sort by partial slabs
  tools/vm/slabinfo: add partial slab listing to -X
  tools/vm/slabinfo: order command line options
  mm: vmscan: correct some vmscan counters for THP swapout
  mm: vmscan: remove double slab pressure by inc'ing sc->nr_scanned
  ...
2019-07-12 11:40:28 -07:00
Ryusuke Konishi ae2c888048 MAINTAINERS: nilfs2: update email address
Change my email since lab.ntt.co.jp email domain has been deprecated due
to company policy.

Link: http://lkml.kernel.org/r/1562495153-8166-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 11:05:40 -07:00
Konstantin Khlebnikov 787c79d639 MAINTAINERS: add entry for block io cgroup
This links mailing list cgroups@vger.kernel.org with related files.

$ ./scripts/get_maintainer.pl -f block/blk-cgroup.c
Jens Axboe <axboe@kernel.dk> (maintainer:BLOCK LAYER)
cgroups@vger.kernel.org (open list:CONTROL GROUP - BLOCK IO CONTROLLER (BLKIO))
linux-block@vger.kernel.org (open list:BLOCK LAYER)
linux-kernel@vger.kernel.org (open list)

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

Added git tree/maintainer entries from Tejun.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-12 09:14:56 -06:00
Vasily Gorbik 327835fb1e MAINTAINERS: update BPF JIT S390 maintainers
Ilya Leoshkevich is joining as s390 bpf maintainer. With his background
as gcc developer he would be valuable for the team and community as a
whole. Ilya, have fun!

Since there is now enough eyes on s390 bpf, relieve Christian Borntraeger,
so that he could focus on his maintainer tasks for other components.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@e.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-12 14:21:02 +02:00
Linus Torvalds d06e415643 Devicetree updates for v5.3:
- DT binding schema examples are now validated against the schemas.
   Various examples are fixed due to that.
 
 - Sync dtc with upstream version v1.5.0-30-g702c1b6c0e73
 
 - Initial schemas for networking bindings. This includes ethernet, phy
   and mdio common bindings with several Allwinner and stmmac converted
   to the schema.
 
 - Conversion of more Arm top-level SoC/board bindings to DT schema
 
 - Conversion of PSCI binding to DT schema
 
 - Rework Arm CPU schema to coexist with other CPU schemas
 
 - Add a bunch of missing vendor prefixes and new ones for SoChip,
   Sipeed, Kontron, B&R Industrial Automation GmbH, and Espressif
 
 - Add Mediatek UART RX wakeup support to binding
 
 - Add reset to ST UART binding
 
 - Remove some Linuxisms from the endianness common-properties.txt
   binding
 
 - Make the flattened DT read-only after init
 
 - Ignore disabled reserved memory nodes
 
 - Clean-up some dead code in FDT functions
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl0mAxQQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw68aEACDEx7SBgpWhv0EJkIk/94bK6MxTMZQGIw2
 OZZQmOJJ0VncfQ3E1emc9zN5xsW1uQlicwh4AwAYbL+Bj3aaG+ANIYyolOLCKybB
 AJD28XAMeZjahf4XtVsieMgdu4OmaLKqUS3BTCcuxY0/gGhTbsLjhUaJLS6GFXK+
 rc/q+BFLBynG5QMmyQXLSTfwqYyHKB9BUY3Jf6VW5o5IvnJQa40dqkrcdn17MJM/
 Ui1bnjrl9Jw78m/JJSkfp/ix6PMEYx1ynQq5cUX0KgroW4z5wcTzDepnttYCG8eh
 zxlZSCnZ/qqgdtff0zofGdNSsMMpnuNJIIo+R3wVqyGe1uwad5NzQglKH0BAYcqd
 NayZ3r9cT6i1iwcrbIU4+HF3leBhS2zuKc3HwdXgBNn47xHMLTPvQnedE4pkAA1A
 ZjM23G7JtX3APIjz1cYe7/QCtBEibkr4u26DAibGklXrwfv96XD4v0k4AumD24hK
 oEyIRN9/H2hBWEVfrAejJjh4WBdj1dBAbjTp+IH7xKNa4+FHinBv/gPFZE2lzi7r
 qB//+fpZi9usi6v4iAqnP1wAKhD7zE8uVfhcWsmRSFsCpaQlp9sIuQ8ZU7+/t3VS
 2IZB1V7ZPCIAeBigY8zi6D8mOMmDbpmzs30tAB9Kh101VlEF0bFmOSrWoa0YdmFq
 M7AfUwnhmg==
 =Qpuw
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:

 - DT binding schema examples are now validated against the schemas.
   Various examples are fixed due to that.

 - Sync dtc with upstream version v1.5.0-30-g702c1b6c0e73

 - Initial schemas for networking bindings. This includes ethernet, phy
   and mdio common bindings with several Allwinner and stmmac converted
   to the schema.

 - Conversion of more Arm top-level SoC/board bindings to DT schema

 - Conversion of PSCI binding to DT schema

 - Rework Arm CPU schema to coexist with other CPU schemas

 - Add a bunch of missing vendor prefixes and new ones for SoChip,
   Sipeed, Kontron, B&R Industrial Automation GmbH, and Espressif

 - Add Mediatek UART RX wakeup support to binding

 - Add reset to ST UART binding

 - Remove some Linuxisms from the endianness common-properties.txt
   binding

 - Make the flattened DT read-only after init

 - Ignore disabled reserved memory nodes

 - Clean-up some dead code in FDT functions

* tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
  dt-bindings: vendor-prefixes: add Sipeed
  dt-bindings: vendor-prefixes: add SoChip
  dt-bindings: 83xx-512x-pci: Drop cell-index property
  dt-bindings: serial: add documentation for Rx in-band wakeup support
  dt-bindings: arm: Convert RDA Micro board/soc bindings to json-schema
  of: unittest: simplify getting the adapter of a client
  of/fdt: pass early_init_dt_reserve_memory_arch() with bool type nomap
  of/platform: Drop superfluous cast in of_device_make_bus_id()
  dt-bindings: usb: ehci: Fix example warnings
  dt-bindings: net: Use phy-mode instead of phy-connection-type
  dt-bindings: simple-framebuffer: Add requirement for pipelines
  dt-bindings: display: Fix simple-framebuffer example
  dt-bindings: net: mdio: Add child nodes
  dt-bindings: net: mdio: Add address and size cells
  dt-bindings: net: mdio: Add a nodename pattern
  dt-bindings: mtd: sunxi-nand: Drop 'maxItems' from child 'reg' property
  dt-bindings: arm: Limit cpus schema to only check Arm 'cpu' nodes
  dt-bindings: backlight: lm3630a: correct schema validation
  dt-bindings: net: dwmac: Deprecate the PHY reset properties
  dt-bindings: net: sun8i-emac: Convert the binding to a schemas
  ...
2019-07-11 18:35:30 -07:00
Linus Torvalds 17a20acaf1 USB / PHY patches for 5.3-rc1
Here is the big USB and PHY driver pull request for 5.3-rc1.
 
 Lots of stuff here, all of which has been in linux-next for a while with
 no reported issues.  Nothing is earth-shattering, just constant forward
 progress for more devices supported and cleanups and small fixes:
   - USB gadget driver updates and fixes
   - new USB gadget driver for some hardware, followed by a quick revert
     of those patches as they were not ready to be merged...
   - PHY driver updates
   - Lots of new driver additions and cleanups with a few fixes mixed in.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSXjYA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynMYACgnSRP3GylwMywrkc9paVmDeiIgNwAn0N2sika
 JEW7C3lkBJZJ7R6V/Ynm
 =drla
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / PHY updates from Greg KH:
 "Here is the big USB and PHY driver pull request for 5.3-rc1.

  Lots of stuff here, all of which has been in linux-next for a while
  with no reported issues. Nothing is earth-shattering, just constant
  forward progress for more devices supported and cleanups and small
  fixes:

   - USB gadget driver updates and fixes

   - new USB gadget driver for some hardware, followed by a quick revert
     of those patches as they were not ready to be merged...

   - PHY driver updates

   - Lots of new driver additions and cleanups with a few fixes mixed
     in"

* tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
  Revert "usb: gadget: storage: Remove warning message"
  Revert "dt-bindings: add binding for USBSS-DRD controller."
  Revert "usb:gadget Separated decoding functions from dwc3 driver."
  Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function."
  Revert "usb:gadget Simplify usb_decode_get_set_descriptor function."
  Revert "usb:cdns3 Add Cadence USB3 DRD Driver"
  Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer."
  usb :fsl: Change string format for errata property
  usb: host: Stops USB controller init if PLL fails to lock
  usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
  usb: phy: Workaround for USB erratum-A005728
  usb: fsl: Set USB_EN bit to select ULPI phy
  usb: Handle USB3 remote wakeup for LPM enabled devices correctly
  drivers/usb/typec/tps6598x.c: fix 4CC cmd write
  drivers/usb/typec/tps6598x.c: fix portinfo width
  usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  usb: renesas_usbhs: add a workaround for a race condition of workqueue
  usb: gadget: udc: renesas_usb3: remove redundant assignment to ret
  usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()
  USB: gadget: function: fix issue Unneeded variable: "value"
  ...
2019-07-11 15:40:06 -07:00
Linus Torvalds e786741ff1 Staging / IIO driver update for 5.3-rc1
Here is the big Staging and IIO driver update for 5.3-rc1.
 
 Lots of new IIO drivers are in here, along with loads of tiny staging
 driver cleanups and fixes.  Overall we almost break even with the same
 lines added as removed.
 
 Full details are in the shortlog, they are too large to list here.
 
 All of these changes have been in linux-next for a while with no
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSXlWA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym5lgCgwNVvum2lwWzAVPkVEMqpGYLZPLgAoJqegC9o
 JsdX6tFoAC8q8+FXWgZ4
 =di3h
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver updates from Greg KH:
 "Here is the big Staging and IIO driver update for 5.3-rc1.

  Lots of new IIO drivers are in here, along with loads of tiny staging
  driver cleanups and fixes. Overall we almost break even with the same
  lines added as removed.

  Full details are in the shortlog, they are too large to list here.

  All of these changes have been in linux-next for a while with no
  reported issues"

* tag 'staging-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (608 commits)
  staging: kpc2000: simplify comparison to NULL in fileops.c
  staging: kpc2000: simplify comparison to NULL in dma.c
  staging: kpc2000: simplify comparison to NULL in kpc2000_spi.c
  staging: rtl8723bs: hal: remove redundant assignment to packetType
  staging: rtl8723bs: Change return type of hal_btcoex_IsBtDisabled()
  staging: rtl8723bs: Remove rtw_btcoex_DisplayBtCoexInfo()
  staging: rtl8723bs: Remove function rtw_btcoex_GetDBG()
  staging: rtl8723bs: Remove function rtw_btcoex_SetDBG()
  staging: rtl8723bs: Remove rtw_btcoex_IsBTCoexCtrlAMPDUSize()
  staging: rtl8723bs: Remove rtw_btcoex_BtInfoNotify()
  staging: rtl8723bs: Remove rtw_btcoex_ScanNotify()
  staging: rtl8723bs: Remove rtw_btcoex_SetSingleAntPath()
  staging: rtl8723bs: Remove rtw_btcoex_SetPGAntNum()
  staging: rtl8192e: remove redundant initialization of rtstatus
  staging: rtl8723bs: Remove rtw_btcoex_GetRaMask()
  staging: rtl8723bs: Remove rtw_btcoex_SetChipType()
  staging: rtl8723bs: Remove rtw_btcoex_ConnectNotify()
  staging: rtl8723bs: Remove rtw_btcoex_SetBTCoexist()
  staging: rtl8723bs: Remove rtw_btcoex_IsBtDisabled()
  staging: rtl8723bs: Remove rtw_btcoex_IsBtControlLps()
  ...
2019-07-11 15:36:02 -07:00
Linus Torvalds 97ff4ca46d Char / Misc driver patches for 5.3-rc1
Here is the "large" pull request for char and misc and other assorted
 smaller driver subsystems for 5.3-rc1.
 
 It seems that this tree is becoming the funnel point of lots of smaller
 driver subsystems, which is fine for me, but that's why it is getting
 larger over time and does not just contain stuff under drivers/char/ and
 drivers/misc.
 
 Lots of small updates all over the place here from different driver
 subsystems:
   - habana driver updates
   - coresight driver updates
   - documentation file movements and updates
   - Android binder fixes and updates
   - extcon driver updates
   - google firmware driver updates
   - fsi driver updates
   - smaller misc and char driver updates
   - soundwire driver updates
   - nvmem driver updates
   - w1 driver fixes
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSXmoQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylV9wCgyJGbpPch8v/ecrZGFHYS4sIMexIAoMco3zf6
 wnqFmXiz1O0tyo1sgV9R
 =7sqO
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
 "Here is the "large" pull request for char and misc and other assorted
  smaller driver subsystems for 5.3-rc1.

  It seems that this tree is becoming the funnel point of lots of
  smaller driver subsystems, which is fine for me, but that's why it is
  getting larger over time and does not just contain stuff under
  drivers/char/ and drivers/misc.

  Lots of small updates all over the place here from different driver
  subsystems:
   - habana driver updates
   - coresight driver updates
   - documentation file movements and updates
   - Android binder fixes and updates
   - extcon driver updates
   - google firmware driver updates
   - fsi driver updates
   - smaller misc and char driver updates
   - soundwire driver updates
   - nvmem driver updates
   - w1 driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (188 commits)
  coresight: Do not default to CPU0 for missing CPU phandle
  dt-bindings: coresight: Change CPU phandle to required property
  ocxl: Allow contexts to be attached with a NULL mm
  fsi: sbefifo: Don't fail operations when in SBE IPL state
  coresight: tmc: Smatch: Fix potential NULL pointer dereference
  coresight: etm3x: Smatch: Fix potential NULL pointer dereference
  coresight: Potential uninitialized variable in probe()
  coresight: etb10: Do not call smp_processor_id from preemptible
  coresight: tmc-etf: Do not call smp_processor_id from preemptible
  coresight: tmc-etr: alloc_perf_buf: Do not call smp_processor_id from preemptible
  coresight: tmc-etr: Do not call smp_processor_id() from preemptible
  docs: misc-devices: convert files without extension to ReST
  fpga: dfl: fme: align PR buffer size per PR datawidth
  fpga: dfl: fme: remove copy_to_user() in ioctl for PR
  fpga: dfl-fme-mgr: fix FME_PR_INTFC_ID register address.
  intel_th: msu: Start read iterator from a non-empty window
  intel_th: msu: Split sgt array and pointer in multiwindow mode
  intel_th: msu: Support multipage blocks
  intel_th: pci: Add Ice Lake NNPI support
  intel_th: msu: Fix single mode with disabled IOMMU
  ...
2019-07-11 15:34:05 -07:00
Linus Torvalds 4832a4dada Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:

 - Documentation conversion to ReST, from Mauro Carvalho Chehab

 - Wacom MobileStudio Pro support, from Ping Cheng

 - Wacom 2nd Gen Intuos Pro Small support, from Aaron Armstrong Skomra

 - assorted small fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Add another Primax PIXART OEM mouse quirk
  HID: wacom: generic: add touchring adjustment for 2nd Gen Pro Small
  docs: hid: convert to ReST
  HID: remove NO_D3 flag when remove driver
  HID: wacom: add new MobileStudio Pro support
  HID: wacom: generic: read the number of expected touches on a per collection basis
  HID: wacom: generic: support the 'report valid' usage for touch
  HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report
  HID: wacom: Add 2nd gen Intuos Pro Small support
  HID: uclogic: Add support for Ugee Rainbow CV720
  HID: logitech-dj: fix return value of logi_dj_recv_query_hidpp_devices
  HID: logitech-hidpp: HID: make const array consumer_rdesc_start static
  HID: logitech-dj: make const array template static
  HID: wacom: correct touch resolution x/y typo
  HID: wacom: generic: Correct pad syncing
  HID: wacom: generic: only switch the mode on devices with LEDs
  HID: logitech-dj: Add usb-id for the 27MHz MX3000 receiver
2019-07-11 15:32:11 -07:00
Linus Torvalds ba6d10ab80 SCSI misc on 20190709
This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
 mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
 removal of the osst driver (I heard from Willem privately that he
 would like the driver removed because all his test hardware has
 failed).  Plus number of minor changes, spelling fixes and other
 trivia.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXSTl4yYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdcxAQDCJVbd
 fPUX76/V1ldupunF97+3DTharxxbst+VnkOnCwD8D4c0KFFFOI9+F36cnMGCPegE
 fjy17dQLvsJ4GsidHy8=
 =aS5B
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
  mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
  removal of the osst driver (I heard from Willem privately that he
  would like the driver removed because all his test hardware has
  failed). Plus number of minor changes, spelling fixes and other
  trivia.

  The big merge conflict this time around is the SPDX licence tags.
  Following discussion on linux-next, we believe our version to be more
  accurate than the one in the tree, so the resolution is to take our
  version for all the SPDX conflicts"

Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.

In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").

In these cases I picked the new-style one.

In a few cases, the SPDX conversion was actually different, though.  As
explained by James above, and in more detail in a pre-pull-request
thread:

 "The other problem is actually substantive: In the libsas code Luben
  Tuikov originally specified gpl 2.0 only by dint of stating:

  * This file is licensed under GPLv2.

  In all the libsas files, but then muddied the water by quoting GPLv2
  verbatim (which includes the or later than language). So for these
  files Christoph did the conversion to v2 only SPDX tags and Thomas
  converted to v2 or later tags"

So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.

Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.

Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style.  The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
  scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
  scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  scsi: qla2xxx: on session delete, return nvme cmd
  scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
  scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
  scsi: megaraid_sas: Introduce various Aero performance modes
  scsi: megaraid_sas: Use high IOPS queues based on IO workload
  scsi: megaraid_sas: Set affinity for high IOPS reply queues
  scsi: megaraid_sas: Enable coalescing for high IOPS queues
  scsi: megaraid_sas: Add support for High IOPS queues
  scsi: megaraid_sas: Add support for MPI toolbox commands
  scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
  scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
  scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  scsi: megaraid_sas: Call disable_irq from process IRQ poll
  scsi: megaraid_sas: Remove few debug counters from IO path
  ...
2019-07-11 15:14:01 -07:00
Linus Torvalds 237f83dfbe Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...
2019-07-11 10:55:49 -07:00
Zhang Rui ff956826a4 intel_rapl: introduce intel_rapl.h
Create a new header file for the common definitions that might be used
by different RAPL Interface.

Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11 15:08:57 +02:00
Linus Torvalds e9a83bd232 It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro.  These create more
    than the usual number of simple but annoying merge conflicts with other
    trees, unfortunately.  He has a lot more of these waiting on the wings
    that, I think, will go to you directly later on.
 
  - A new document on how to use merges and rebases in kernel repos, and one
    on Spectre vulnerabilities.
 
  - Various improvements to the build system, including automatic markup of
    function() references because some people, for reasons I will never
    understand, were of the opinion that :c:func:``function()`` is
    unattractive and not fun to type.
 
  - We now recommend using sphinx 1.7, but still support back to 1.4.
 
  - Lots of smaller improvements, warning fixes, typo fixes, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
 gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
 raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
 3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
 DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
 dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
 =D0eO
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.3' of git://git.lwn.net/linux

Pull Documentation updates from Jonathan Corbet:
 "It's been a relatively busy cycle for docs:

   - A fair pile of RST conversions, many from Mauro. These create more
     than the usual number of simple but annoying merge conflicts with
     other trees, unfortunately. He has a lot more of these waiting on
     the wings that, I think, will go to you directly later on.

   - A new document on how to use merges and rebases in kernel repos,
     and one on Spectre vulnerabilities.

   - Various improvements to the build system, including automatic
     markup of function() references because some people, for reasons I
     will never understand, were of the opinion that
     :c:func:``function()`` is unattractive and not fun to type.

   - We now recommend using sphinx 1.7, but still support back to 1.4.

   - Lots of smaller improvements, warning fixes, typo fixes, etc"

* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
  docs: automarkup.py: ignore exceptions when seeking for xrefs
  docs: Move binderfs to admin-guide
  Disable Sphinx SmartyPants in HTML output
  doc: RCU callback locks need only _bh, not necessarily _irq
  docs: format kernel-parameters -- as code
  Doc : doc-guide : Fix a typo
  platform: x86: get rid of a non-existent document
  Add the RCU docs to the core-api manual
  Documentation: RCU: Add TOC tree hooks
  Documentation: RCU: Rename txt files to rst
  Documentation: RCU: Convert RCU UP systems to reST
  Documentation: RCU: Convert RCU linked list to reST
  Documentation: RCU: Convert RCU basic concepts to reST
  docs: filesystems: Remove uneeded .rst extension on toctables
  scripts/sphinx-pre-install: fix out-of-tree build
  docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
  Documentation: PGP: update for newer HW devices
  Documentation: Add section about CPU vulnerabilities for Spectre
  Documentation: platform: Delete x86-laptop-drivers.txt
  docs: Note that :c:func: should no longer be used
  ...
2019-07-09 12:34:26 -07:00
Rob Herring f21ce913a8 dt-bindings: arm: Convert RDA Micro board/soc bindings to json-schema
Convert RDA Micro SoC bindings to DT schema format using json-schema.

Cc: "Andreas Färber" <afaerber@suse.de>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-09 12:56:17 -06:00
Linus Torvalds 4b4704520d ACPI updates for 5.3-rc1
- Update the ACPICA code in the kernel to upstream revision 20190703
    including:
    * Initial/defalut namespace creation simplification (Bob Moore).
    * Object initialization sequence update (Bob Moore).
    * Removal of legacy module-level (dead) code (Erik Schmauss).
    * Table load object initialization update (Erik Schmauss, Nikolaus
      Voss).
 
  - Fix GPE enabling issue in ACPICA causing premature wakeups from
    suspend-to-idle to occur (Rafael Wysocki).
 
  - Allow ACPI AC and battery drivers to be built on non-X86 (Ard
    Biesheuvel).
 
  - Fix address space handler removal in the ACPI PMIC driver for
    Intel platforms (Andy Shevchenko).
 
  - Allow BGRT to be overridden via initrd or configfs (Andrea Oliveri).
 
  - Fix object resolution on table loads via configfs (Nikolaus Voss).
 
  - Clean up assorted pieces of ACPI code and tools (Colin Ian King,
    Liguang Zhang, Masahiro Yamada).
 
  - Fix documentation build warning, convert the extcon document to
    ReST and add it to the ACPI documentation (Mauro Carvalho Chehab,
    Qian Cai).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl0jLCoSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxbV4P/18Kt/la5KUvOMVOXXIEPes5lEbhQ8m1
 BBhRcHOh9GDNXlXkogJSssKo5GlHXBBtN5ipMMFnwyi/gK2V1834nwXG3+gjuUoE
 Q9zHTBQDBybBCDDj/EjZeF+AuTMRbeW2bV80+4LgQ2oAQCK5TOG873K1U9iAYTBs
 +7KaquWcZKPEzZb6RvaH0+2T/Ihg35Hqutlyp2ly1+h8SzYDwJui4SQwsh0BPrml
 ujMveW2dbVsoOsAFJJw3ATsejBeNmaBfK6VtJnBF4eeeCQKfI0auz+OTht22+4gR
 NX+Q5/XZdFti7m60fVEc78yhNp2BPCHbR8UNnx3rKpjiVkh8yPG7B4KTgmOwpREW
 0BMzGSJIwCkoK89Abf3+NqEk77hEDVljgqLTYAIfKnFmO6SL1OH3bQERFducEp/L
 ncBQOMz8FOYAJIbNFTIHA7w/5XYtFsAk+grJMPXiZKi/hOFn4YyuR/8qDNwLq3R9
 +g1ggqCPzDrJQ7IiKJ8pwS+kJP2jlp/u7JdWzKJl8FaCtxfk2I6TGQtM/MOR5JJj
 tup2v8I8c8ROnv/0aa6jqKYHS+w84xXAjb54BdgGCaU5Oz2Ainoyp0Aa0BVIpjSu
 vx9CSF74s9aP7lY8TwAXy7njLz18VNnocQn9zksfl5hJncNCgYOv96mtgeqHsuo6
 E811ArtdcHRR
 =4FCz
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20190703, fix up the handling of GPEs in ACPICA, allow some more ACPI
  code to be built on ARM64 platforms, allow BGRT to be overridden, fix
  minor issues and clean up assorted pieces of ACPI code.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20190703
     including:
       - Initial/default namespace creation simplification (Bob Moore).
       - Object initialization sequence update (Bob Moore).
       - Removal of legacy module-level (dead) code (Erik Schmauss).
       - Table load object initialization update (Erik Schmauss,
         Nikolaus Voss).

   - Fix GPE enabling issue in ACPICA causing premature wakeups from
     suspend-to-idle to occur (Rafael Wysocki).

   - Allow ACPI AC and battery drivers to be built on non-X86 (Ard
     Biesheuvel).

   - Fix address space handler removal in the ACPI PMIC driver for Intel
     platforms (Andy Shevchenko).

   - Allow BGRT to be overridden via initrd or configfs (Andrea
     Oliveri).

   - Fix object resolution on table loads via configfs (Nikolaus Voss).

   - Clean up assorted pieces of ACPI code and tools (Colin Ian King,
     Liguang Zhang, Masahiro Yamada).

   - Fix documentation build warning, convert the extcon document to
     ReST and add it to the ACPI documentation (Mauro Carvalho Chehab,
     Qian Cai)"

* tag 'acpi-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / APEI: Remove needless __ghes_check_estatus() calls
  ACPICA: Update version to 20190703
  ACPICA: Update table load object initialization
  ACPICA: Update for object initialization sequence
  ACPICA: remove legacy module-level code due to deprecation
  ACPICA: Namespace: simplify creation of the initial/default namespace
  ACPI / PMIC: intel: Drop double removal of address space handler
  ACPI: APD: remove redundant assignment to pointer clk
  docs: extcon: convert it to ReST and move to ACPI dir
  ACPI: Make AC and battery drivers available on !X86
  ACPICA: Clear status of GPEs on first direct enable
  ACPI: configfs: Resolve objects on host-directed table loads
  ACPI: tables: Allow BGRT to be overridden
  ACPI: OSL: Make a W=1 kernel-doc warning go away
  ACPI: tools: Exclude tools/* from .gitignore patterns
2019-07-09 10:21:39 -07:00
Linus Torvalds 4cdd5f9186 sound updates for 5.3
Many updates in this development cycle are found in ASoC where it got
 a wide range of changes for the continued refactoring.
 Some highlights are below.
 
 ASoC:
 * Continued refactoring work by Morimoto-san toward the full
   componentization; the changes are seen allover the places
 * Support for force disconnecting muxes in DAPM
 * Continued development of ASoC Intel SOF stuff
 * New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90,
   Conexant CX2072X, Realtek RT1011 and RT1308
 
 HD-audio:
 * More fixes and adjustments for ASoC SOF HD-audio
 * Fix for resume problem on some Realtek codecs
 
 USB-audio:
 * A few fixes for the issues reported by syzbot USB fuzzer
 * Fix for UAC2 extension unit parser
 * Quirks for Line6 Helix, Emgaic Unitor 8
 
 FireWire:
 * Lots of code refactoring and fixes in most of its components
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl0kp+oOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE902A/+ISwG/QtN41cnJxBaEMMQryJ9jDG2ux89NSST
 TFbmXuJj3CRsBoQ4gkqgRGtEvxf8DK5BohEl8AarxYaTrtZALEjLJCm9oQ5YUF1X
 Vkwqw9cuj+lptZmB6j/t4f352edsvuf4ZyG6plb331xbzJzzh06s0PpUyIispdMH
 hmxBPrKuWl1pPtpRaLqmhUrq3g4aMA3WKbVChwIdlMc3laJkbsIlMBHs74V4yo8s
 MauzOdNaFFgr7KKjopWO6b/qLVRgcMsm5Cr/+PaIcylcbsJ9UiMew6s7H7CFjTj+
 AzER9ydTBp9hmJHdXyVmEHzTpYJL+5nMUToYbv8on4gzScIVhimpAjJVDjT6ALui
 q7+NyicdnGitpFyrbE0mS3Y0yUtbfwmJA1txrmpoyVnX9HhJ5ZNvRMEW0HmylKi5
 CLvJcdg2XG42xCogaNtOkI54AAMZIDgulAQwuYemY5C/wAvsOxQjhjvfv8oTFMPv
 3Q0BhTjuH7xACcxIBIZSvZmw822PB07/lrR8lMyJz4CTHJwNts1ycnc5Kw1n/8qs
 73f6RZWiWI0eqMMm0Pahv6bGD9lLurp66Y0NnwBl7HXSvXAdL9L+xlzecqqTYeCI
 r1czm7qli+mKZY9Wml/sfgXgBaLw0/UhhU99IyzrVYwrTrNRRAb6UJqCRmw0mTuj
 1f0Q69w=
 =H+RV
 -----END PGP SIGNATURE-----

Merge tag 'sound-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Many updates in this development cycle are found in ASoC where it got
  a wide range of changes for the continued refactoring.

  Some highlights are below.

  ASoC:

   - Continued refactoring work by Morimoto-san toward the full
     componentization; the changes are seen allover the places

   - Support for force disconnecting muxes in DAPM

   - Continued development of ASoC Intel SOF stuff

   - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
     CX2072X, Realtek RT1011 and RT1308

  HD-audio:

   - More fixes and adjustments for ASoC SOF HD-audio

   - Fix for resume problem on some Realtek codecs

  USB-audio:

   - A few fixes for the issues reported by syzbot USB fuzzer

   - Fix for UAC2 extension unit parser

   - Quirks for Line6 Helix, Emgaic Unitor 8

  FireWire:

   - Lots of code refactoring and fixes in most of its components"

* tag 'sound-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (626 commits)
  ALSA: firewire-lib: code refactoring for local variables
  ALSA: firewire-lib: code refactoring for post operation to data block counter
  ALSA: firewire-lib: code refactoring for error path of parser for CIP header
  ALSA: firewire-lib: fix different data block counter between probed event and transferred isochronous packet
  ALSA: firewire-lib: fix initial value of data block count for IR context without CIP_DBC_IS_END_EVENT
  ALSA: firewire-lib/fireface: fix initial value of data block counter for IR context with CIP_NO_HEADER
  ALSA: firewire-lib: fix invalid length of rx packet payload for tracepoint events
  ALSA: usb-audio: fix Line6 Helix audio format rates
  firewire-motu: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: firewire-digi00x: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: dice: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: oxfw: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: fireworks: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: bebob: fix wrong reference count for stream functionality at error path of rawmidi interface
  ASoC: SOF: Intel: implement runtime idle for CNL/APL
  ASoC: SOF: add runtime idle callback
  ASoC: hdac_hdmi: report codec link up/down status to bus
  ASoC: SOF: debug: fix possible memory leak in sof_dfsentry_write()
  ASoC: sunxi: sun50i-codec-analog: Add earpiece
  ASoC: rt5665: remove redundant assignment to variable idx
  ...
2019-07-09 09:59:43 -07:00
Linus Torvalds ed63b9c873 media updates for v5.3-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl0kcloACgkQCF8+vY7k
 4RU0Mg//c0BK1VjPfh45k3HxDvvoQnaTlQjo1ApvEBa64TR10/JxXi9U+QuhY1H1
 QEOjJJrLe3OdWrcBwFT5s15cBdRKn6jB8s67FgN7CFA8IzG4xBjOovOP4MXYXztz
 TjNlkLwWkkwiQ4C99HInSsmI36ZbnEI3PloJXMrEBnsXQIazjRzMeJ3DKZggSSkN
 jhedASDgnHgSun0rCFh0mN8k2kiMUZ/XxVIqiCuWT1AzyycoHp+HXm9YilnxD7q0
 43X6v4HtxrfJMQWQ8z3Pxb4McHc1j3L8S7Mgu9oSf7oJb12grsDxokytUCnmhFz8
 gvNgx3D2OTQk2nrQlxcfgrbqMs2KXLkXIiqg/dZ35hpNfXIOxiOx77zqqIsg2WHr
 j4qaDcw+TNQU1eUIm0dIcPFi82EMOjAUqHRrvsg94EbBQ1dUniE4GCkCHFU+2TLz
 YIaWXv/WmavrWTydsoIKqbBBOR9OY9+PDjkxgHsSVPSZ9sAskcPQ5MJdkatoZcu/
 glZJD8HEe/w1vi1Ob3ZsXU7KzNWAhIkWvtEWsxAuFGzr8uNfwmzM2a5giNLIV94b
 W+ZYhQT363uliVSOPFRjqqkVliC/HmV2lcNVzlVymWgeKhRj8fI5JqrDhpLz0XD+
 9Rn90mweCzCSw7/fj/keP9mEnMce4XdkkDB/Pyf+dIMiLMOczoU=
 =ABgl
 -----END PGP SIGNATURE-----

Merge tag 'media/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - new Atmel microship ISC driver

 - coda has gained support for mpeg2 and mpeg4

 - cxusb gained support for analog TV

 - rockchip staging driver was split into two separate staging drivers

 - added a new staging driver for Allegro DVT video IP core

 - added a new staging driver for Amlogic Meson video decoder

 - lots of improvements and cleanups

* tag 'media/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (398 commits)
  media: allegro: use new v4l2_m2m_ioctl_try_encoder_cmd funcs
  media: doc-rst: Fix typos
  media: radio-raremono: change devm_k*alloc to k*alloc
  media: stv0297: fix frequency range limit
  media: rc: Prefer KEY_NUMERIC_* for number buttons on remotes
  media: dvb_frontend: split dvb_frontend_handle_ioctl function
  media: mceusb: disable "nonsensical irdata" messages
  media: rc: remove redundant dev_err message
  media: cec-notifier: add new notifier functions
  media: cec: add struct cec_connector_info support
  media: cec-notifier: rename variables, check kstrdup and n->conn_name
  media: MAINTAINERS: Add maintainers for Media Controller
  media: staging: media: tegra-vde: Defer dmabuf's unmapping
  media: staging: media: tegra-vde: Add IOMMU support
  media: hdpvr: fix locking and a missing msleep
  media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom()
  media: atmel: atmel-isc: fix i386 build error
  media: v4l2-ctrl: Move compound control initialization
  media: hantro: Use vb2_get_buffer
  media: pci: cx88: Change the type of 'missed' to u64
  ...
2019-07-09 09:47:22 -07:00
Linus Torvalds 947fbd4ca9 EDAC changes for v5.3
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdI2fNAAoJEKurIx+X31iBJVoP/jSJbSY49IcJ7st8uolxJ9d9
 84ol7TNBnKeKeUXxrQom2hJsqUnQzaUgw3FKfxX0hmYG5Q9xGS8c+BlW4Giei+Ur
 baGLO7/UEudWcaez3yOQF+R+yVfsLEATN7gSHcrG81aDyR0F6sMPVCOJOj3hqqnY
 pZpfxR2+52Xx+Bt8KUUQziCK8qghQYKqHUQUz7R83L0gbbx5+hTAT08h4FCxE8Vx
 fhntQuteJ2PfYgXlmfv+ZLE4HSHaAlokOnVXJhK+7tMdwDD2we+pL0zr5XdbkZYc
 If6p9LgJinMe5P5gJSvxT1idWmomKIQqazaC17ff/anLRySrzi9F2oPAGtVI2tvK
 NekoO3oo4s+xONXfe7Q922rIGt/4vZj6tcqBuMYCOAU7TJGQRqDeEl4+T+aIZNMB
 9QBFUfKupy7XZ3H5rJTrYaXFPyYkdRGu5ODEHvwnpRiu+uD1UaTR57iyK5kjToGY
 mcK3nVad2X1foMOQW33jVAhxGJ+sz2YB/XgQuNnqpUFKktLQ8Es1CSgzB02GvW2b
 OBJiFCZybMKtBnTEVINYc/dcZ6uOUQ17BwKoR4szFGQLWrzbnfe7as5fa0uyj3ib
 BEbWcDM3KCDMRWAE/VwgyGzH3lg4QP1mE7uRdLfMb5JhIbQvHjo7T0bUBzUy5/Mf
 4P9CWweplIi82Q0f2q7r
 =5hCV
 -----END PGP SIGNATURE-----

Merge tag 'please-pull-for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC updates from Tony Luck:
 "All the bits that Boris had queued in his tree plus four patches to
  add support for Intel Icelake Xeon and then fix a few corner cases"

* tag 'please-pull-for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec
  EDAC, skx, i10nm: Fix source ID register offset
  EDAC, i10nm: Check ECC enabling status per channel
  EDAC, i10nm: Add Intel additional Ice-Lake support
  EDAC: Make edac_debugfs_create_x*() return void
  EDAC/aspeed: Remove set but not used variable 'np'
  EDAC/ie31200: Reformat PCI device table
  EDAC/ie31200: Add Intel Coffee Lake CPU support
  EDAC/sifive: Add EDAC platform driver for SiFive SoCs
  EDAC/sb_edac: Remove redundant update of tad_base
  arm64: dts: stratix10: Add SDMMC EDAC node
  EDAC/altera: Add Stratix10 SDMMC support
  arm64: dts: stratix10: Add OCRAM EDAC node
  EDAC/altera: Add Stratix10 OCRAM ECC support
  EDAC/sysfs: Drop device references properly
  EDAC/sysfs: Fix memory leak when creating a csrow object
2019-07-09 09:43:20 -07:00
Linus Torvalds c6b6cebbc5 spi: Updates for v5.3
For the most part this is a quiet release for SPI, though there's
 several of the more widely used drivers that have had some fairly
 substantial development done on them, mainly improving
 performance and adding support for some more obscure use cases.
 
  - Support for configuring a minimum time for chip select to be
    deasserted between transfers from Martin Sperl.
  - A rework of the ACPI device instantiation code from Ard
    Biesheuvel.
  - Fairly substantial development on the AT91 USART, BCM2835 and
    Tegra114 drivers.
  - New driver for Socionext SynQuacer.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jO5YTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0Ha8B/9xtXWN195F92ndEoswk1NZhMmVfd/w
 jlPjVJFyBeOGy/X/OmHbRvpZloq2LF7w7kGA19d67gWni7GQoQbBaIhNHoWnSuUh
 eZ7nLPwJ2N7T11ioDOCJygyz7pfh+cJ9RtC2ce3pdkp1e6Q8juEw6E1LXEiLD3Rf
 7pX1X41kPaqJy0zJsa/y6ft6LL0exwMFDvyOqRP/zMBUa8CHjO+x8IM52z+vipzb
 Bw5pgzlMbQHDGK/WksFAuE7m1IV9hyyODPdrbelc7d7gPwbEIy5mT89RD3PXcqaa
 6jBLWx4nBONGTQ7p6K4j0ET4/BfzVMq5FOTM2HMyZidN9NHLJM+H7EHP
 =O4fQ
 -----END PGP SIGNATURE-----

Merge tag 'spi-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "For the most part this is a quiet release for SPI, though there's
  several of the more widely used drivers that have had some fairly
  substantial development done on them, mainly improving performance and
  adding support for some more obscure use cases.

  Summary:

   - Support for configuring a minimum time for chip select to be
     deasserted between transfers from Martin Sperl.

   - A rework of the ACPI device instantiation code from Ard Biesheuvel.

   - Fairly substantial development on the AT91 USART, BCM2835 and
     Tegra114 drivers.

   - New driver for Socionext SynQuacer"

* tag 'spi-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits)
  spi: pxa2xx: Add support for Intel Elkhart Lake
  spi: atmel-quadspi: fix resume call
  spi: atmel-quadspi: void return type for atmel_qspi_init()
  spi: pxa2xx: Set minimum transfer speed
  spi: stm32-qspi: remove signal sensitive on completion
  dt-bindings: spi: stm32-qspi: add dma properties
  spi: uniphier: fix zero-length transfer
  spi: uniphier: fix timeout error
  spi/acpi: avoid spurious matches during slave enumeration
  spi: spi-stm32-qspi: Remove CR_FTHRES_MASK usage
  spi: fix ctrl->num_chipselect constraint
  spi: spi-synquacer: Fixed build on architectures missing readsl/writesl series
  spi/acpi: fix incorrect ACPI parent check
  spi: don't open code list_for_each_entry_safe_reverse()
  spi: No need to assign dummy value in spi_unregister_controller()
  spi: Add a prototype for exported spi_set_cs_timing()
  spi/acpi: enumerate all SPI slaves in the namespace
  spi: qup: fix PIO/DMA transfers.
  spi: Use struct_size() helper
  spi: mediatek: add SPI_LSB_FIRST support
  ...
2019-07-09 09:17:59 -07:00
Linus Torvalds 98537ee92f regulator: Updates for v5.3
A couple of new features in the core, the most interesting one
 being support for complex regulator coupling configurations
 initially targeted at nVidia Tegra SoCs, and some new drivers but
 otherwise quite a quiet release.
 
  - Core support for gradual ramping of voltages for devices that
    can't manage large changes in hardware from Bartosz Golaszewski.
  - Core support for systems that have complex coupling requirements
    best described via code, contributed by Dmitry Osipenko.
  - New drivers for Dialog SLG51000, Qualcomm PM8005 and ST
    Microelectronics STM32-Booster.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jIZwTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0PG+B/9EQnjM29THpBKM6bKdl8cYcf3Hq/FX
 KNtXjwaTM0DqYtpk1RkaHgecxTJwesJ0k9AYijh0ieeMhb5UES280+6B4NqPb7xr
 UmFBbNcdk9G+x9q1TyT8akRMkCugEMscQodyk4npzZRjGv8qUsNJUY71Bq2T/JJx
 QXo5fKlWICzBahF87DCB5pKC7PKfNkx3BWCrGGXOqoBX2ZEKytyWlCa0nGUZ+LqL
 GqXmmIjKL7H8MP3avmrrRHYpeF5DLXAzH+HEIM9Y0F1cRcdgOS1Exv2eG+90a634
 yybVDBX2d5zfiEIoRnpldtB52EGXjvwbo7w1mFwh9UgJRbOCZgb+ZQXT
 =26r6
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A couple of new features in the core, the most interesting one being
  support for complex regulator coupling configurations initially
  targeted at nVidia Tegra SoCs, and some new drivers but otherwise
  quite a quiet release.

  Summary:

   - Core support for gradual ramping of voltages for devices that can't
     manage large changes in hardware from Bartosz Golaszewski.

   - Core support for systems that have complex coupling requirements
     best described via code, contributed by Dmitry Osipenko.

   - New drivers for Dialog SLG51000, Qualcomm PM8005 and ST
     Microelectronics STM32-Booster"

* tag 'regulator-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
  regulator: max77650: use vsel_step
  regulator: implement selector stepping
  regulator: max77650: add MODULE_ALIAS()
  regulator: max77620: remove redundant assignment to variable ret
  dt-bindings: regulator: add support for the stm32-booster
  regulator: add support for the stm32-booster
  regulator: s2mps11: Adjust supported buck voltages to real values
  regulator: s2mps11: Fix buck7 and buck8 wrong voltages
  gpio: Fix return value mismatch of function gpiod_get_from_of_node()
  regulator: core: Expose some of core functions needed by couplers
  regulator: core: Introduce API for regulators coupling customization
  regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspend
  regulator: s2mps11: Reduce number of rdev_get_id() calls
  regulator: qcom_spmi: Do NULL check for lvs
  regulator: qcom_spmi: Fix math of spmi_regulator_set_voltage_time_sel
  regulator: da9061/62: Adjust LDO voltage selection minimum value
  regulator: s2mps11: Fix ERR_PTR dereference on GPIO lookup failure
  regulator: qcom_spmi: add PMS405 SPMI regulator
  dt-bindings: qcom_spmi: Document pms405 support
  arm64: dts: msm8998-mtp: Add pm8005_s1 regulator
  ...
2019-07-09 09:15:03 -07:00
Linus Torvalds 8a3367cc80 LED updates for 5.3-rc1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXRozKAAKCRBiEGxRG/Sl
 25okAP9I0Rmscpqjb/+GEeXH4EmL3moGzc9o/BzHRqfeO4wqYAEA+8f7L20xHe8g
 tvEGfP7mN/oBmcAfqgH5K9F4eJsBRAw=
 =NkCn
 -----END PGP SIGNATURE-----

Merge tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:

 - Add a new LED common module for ti-lmu driver family

 - Modify MFD ti-lmu bindings
        - add ti,brightness-resolution
        - add the ramp up/down property

 - Add regulator support for LM36274 driver to lm363x-regulator.c

 - New LED class drivers with DT bindings:
        - leds-spi-byte
        - leds-lm36274
        - leds-lm3697 (move the support from MFD to LED subsystem)

 - Simplify getting the I2C adapter of a client:
        - leds-tca6507
        - leds-pca955x

 - Convert LED documentation to ReST

* tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt
  docs: leds: convert to ReST
  leds: leds-tca6507: simplify getting the adapter of a client
  leds: leds-pca955x: simplify getting the adapter of a client
  leds: lm36274: Introduce the TI LM36274 LED driver
  dt-bindings: leds: Add LED bindings for the LM36274
  regulator: lm363x: Add support for LM36274
  mfd: ti-lmu: Add LM36274 support to the ti-lmu
  dt-bindings: mfd: Add lm36274 bindings to ti-lmu
  leds: max77650: Remove set but not used variable 'parent'
  leds: avoid flush_work in atomic context
  leds: lm3697: Introduce the lm3697 driver
  mfd: ti-lmu: Remove support for LM3697
  dt-bindings: ti-lmu: Modify dt bindings for the LM3697
  leds: TI LMU: Add common code for TI LMU devices
  leds: spi-byte: add single byte SPI LED driver
  dt-bindings: leds: Add binding for spi-byte LED.
  dt-bindings: mfd: LMU: Add ti,brightness-resolution
  dt-bindings: mfd: LMU: Add the ramp up/down property
2019-07-09 08:59:39 -07:00
Linus Torvalds 92c1d65221 Merge branch 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "Documentation updates and the addition of cgroup_parse_float() which
  will be used by new controllers including blk-iocost"

* 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs: cgroup-v1: convert docs to ReST and rename to *.rst
  cgroup: Move cgroup_parse_float() implementation out of CONFIG_SYSFS
  cgroup: add cgroup_parse_float()
2019-07-08 21:35:12 -07:00
Linus Torvalds 4d2fa8b44b Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 5.3:

  API:
   - Test shash interface directly in testmgr
   - cra_driver_name is now mandatory

  Algorithms:
   - Replace arc4 crypto_cipher with library helper
   - Implement 5 way interleave for ECB, CBC and CTR on arm64
   - Add xxhash
   - Add continuous self-test on noise source to drbg
   - Update jitter RNG

  Drivers:
   - Add support for SHA204A random number generator
   - Add support for 7211 in iproc-rng200
   - Fix fuzz test failures in inside-secure
   - Fix fuzz test failures in talitos
   - Fix fuzz test failures in qat"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
  crypto: stm32/hash - remove interruptible condition for dma
  crypto: stm32/hash - Fix hmac issue more than 256 bytes
  crypto: stm32/crc32 - rename driver file
  crypto: amcc - remove memset after dma_alloc_coherent
  crypto: ccp - Switch to SPDX license identifiers
  crypto: ccp - Validate the the error value used to index error messages
  crypto: doc - Fix formatting of new crypto engine content
  crypto: doc - Add parameter documentation
  crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
  crypto: arm64/aes-ce - add 5 way interleave routines
  crypto: talitos - drop icv_ool
  crypto: talitos - fix hash on SEC1.
  crypto: talitos - move struct talitos_edesc into talitos.h
  lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
  crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
  crypto: asymmetric_keys - select CRYPTO_HASH where needed
  crypto: serpent - mark __serpent_setkey_sbox noinline
  crypto: testmgr - dynamically allocate crypto_shash
  crypto: testmgr - dynamically allocate testvec_config
  crypto: talitos - eliminate unneeded 'done' functions at build time
  ...
2019-07-08 20:57:08 -07:00
David S. Miller af144a9834 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Two cases of overlapping changes, nothing fancy.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08 19:48:57 -07:00
Michael Kelley 765e33f521 Drivers: hv: vmbus: Break out ISA independent parts of mshyperv.h
Break out parts of mshyperv.h that are ISA independent into a
separate file in include/asm-generic. This move facilitates
ARM64 code reusing these definitions and avoids code
duplication. No functionality or behavior is changed.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-08 19:06:27 -04:00
Jesper Dangaard Brouer f714ecc9cf MAINTAINERS: Add page_pool maintainer entry
In this release cycle the number of NIC drivers using page_pool
will likely reach 4 drivers.  It is about time to add a maintainer
entry.  Add myself and Ilias.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08 15:51:00 -07:00
Jason Gunthorpe 2ef38e380e Merge tag 'blk-dim-v2' into rdma.git for-next
Generic DIM

From: Tal Gilboa and Yamin Fridman

Implement net DIM over a generic DIM library, add RDMA DIM

dim.h lib exposes an implementation of the DIM algorithm for
dynamically-tuned interrupt moderation for networking interfaces.

We want a similar functionality for other protocols, which might need to
optimize interrupts differently. Main motivation here is DIM for NVMf
storage protocol.

Current DIM implementation prioritizes reducing interrupt overhead over
latency. Also, in order to reduce DIM's own overhead, the algorithm might
take some time to identify it needs to change profiles. While this is
acceptable for networking, it might not work well on other scenarios.

Here we propose a new structure to DIM. The idea is to allow a slightly
modified functionality without the risk of breaking Net DIM behavior for
netdev. We verified there are no degradations in current DIM behavior with
the modified solution.

Suggested solution:
- Common logic is implemented in lib/dim/dim.c
- Net DIM (existing) logic is implemented in lib/dim/net_dim.c, which uses
  the common logic in dim.c
- Any new DIM logic will be implemented in "lib/dim/new_dim.c".
  This new implementation will expose modified versions of profiles,
  dim_step() and dim_decision().
- DIM API is declared in include/linux/dim.h for all implementations.

Pros for this solution are:
- Zero impact on existing net_dim implementation and usage
- Relatively more code reuse (compared to two separate solutions)
- Increased extensibility

Required for dependencies in the next series.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08 16:37:21 -03:00
Linus Torvalds 13324c42c1 Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU feature updates from Thomas Gleixner:
 "Updates for x86 CPU features:

   - Support for UMWAIT/UMONITOR, which allows to use MWAIT and MONITOR
     instructions in user space to save power e.g. in HPC workloads
     which spin wait on synchronization points.

     The maximum time a MWAIT can halt in userspace is controlled by the
     kernel and can be adjusted by the sysadmin.

   - Speed up the MTRR handling code on CPUs which support cache
     self-snooping correctly.

     On those CPUs the wbinvd() invocations can be omitted which speeds
     up the MTRR setup by a factor of 50.

   - Support for the new x86 vendor Zhaoxin who develops processors
     based on the VIA Centaur technology.

   - Prevent 'cat /proc/cpuinfo' from affecting isolated NOHZ_FULL CPUs
     by sending IPIs to retrieve the CPU frequency and use the cached
     values instead.

   - The addition and late revert of the FSGSBASE support. The revert
     was required as it turned out that the code still has hard to
     diagnose issues. Yet another engineering trainwreck...

   - Small fixes, cleanups, improvements and the usual new Intel CPU
     family/model addons"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  x86/fsgsbase: Revert FSGSBASE support
  selftests/x86/fsgsbase: Fix some test case bugs
  x86/entry/64: Fix and clean up paranoid_exit
  x86/entry/64: Don't compile ignore_sysret if 32-bit emulation is enabled
  selftests/x86: Test SYSCALL and SYSENTER manually with TF set
  x86/mtrr: Skip cache flushes on CPUs with cache self-snooping
  x86/cpu/intel: Clear cache self-snoop capability in CPUs with known errata
  Documentation/ABI: Document umwait control sysfs interfaces
  x86/umwait: Add sysfs interface to control umwait maximum time
  x86/umwait: Add sysfs interface to control umwait C0.2 state
  x86/umwait: Initialize umwait control values
  x86/cpufeatures: Enumerate user wait instructions
  x86/cpu: Disable frequency requests via aperfmperf IPI for nohz_full CPUs
  x86/acpi/cstate: Add Zhaoxin processors support for cache flush policy in C3
  ACPI, x86: Add Zhaoxin processors support for NONSTOP TSC
  x86/cpu: Create Zhaoxin processors architecture support file
  x86/cpu: Split Tremont based Atoms from the rest
  Documentation/x86/64: Add documentation for GS/FS addressing mode
  x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
  x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
  ...
2019-07-08 11:59:59 -07:00
Linus Torvalds 927ba67a63 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "The timer and timekeeping departement delivers:

  Core:

   - The consolidation of the VDSO code into a generic library including
     the conversion of x86 and ARM64. Conversion of ARM and MIPS are en
     route through the relevant maintainer trees and should end up in
     5.4.

     This gets rid of the unnecessary different copies of the same code
     and brings all architectures on the same level of VDSO
     functionality.

   - Make the NTP user space interface more robust by restricting the
     TAI offset to prevent undefined behaviour. Includes a selftest.

   - Validate user input in the compat settimeofday() syscall to catch
     invalid values which would be turned into valid values by a
     multiplication overflow

   - Consolidate the time accessors

   - Small fixes, improvements and cleanups all over the place

  Drivers:

   - Support for the NXP system counter, TI davinci timer

   - Move the Microsoft HyperV clocksource/events code into the
     drivers/clocksource directory so it can be shared between x86 and
     ARM64.

   - Overhaul of the Tegra driver

   - Delay timer support for IXP4xx

   - Small fixes, improvements and cleanups as usual"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  time: Validate user input in compat_settimeofday()
  timer: Document TIMER_PINNED
  clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic
  clocksource/drivers: Make Hyper-V clocksource ISA agnostic
  MAINTAINERS: Fix Andy's surname and the directory entries of VDSO
  hrtimer: Use a bullet for the returns bullet list
  arm64: vdso: Fix compilation with clang older than 8
  arm64: compat: Fix __arch_get_hw_counter() implementation
  arm64: Fix __arch_get_hw_counter() implementation
  lib/vdso: Make delta calculation work correctly
  MAINTAINERS: Add entry for the generic VDSO library
  arm64: compat: No need for pre-ARMv7 barriers on an ARMv8 system
  arm64: vdso: Remove unnecessary asm-offsets.c definitions
  vdso: Remove superfluous #ifdef __KERNEL__ in vdso/datapage.h
  clocksource/drivers/davinci: Add support for clocksource
  clocksource/drivers/davinci: Add support for clockevents
  clocksource/drivers/tegra: Set up maximum-ticks limit properly
  clocksource/drivers/tegra: Cycles can't be 0
  clocksource/drivers/tegra: Restore base address before cleanup
  clocksource/drivers/tegra: Add verbose definition for 1MHz constant
  ...
2019-07-08 11:06:29 -07:00
Linus Torvalds 2a1ccd3142 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The irq departement provides the usual mixed bag:

  Core:

   - Further improvements to the irq timings code which aims to predict
     the next interrupt for power state selection to achieve better
     latency/power balance

   - Add interrupt statistics to the core NMI handlers

   - The usual small fixes and cleanups

  Drivers:

   - Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and
     Amazon Gravition AMR/GIC interrupt controllers.

   - Rework of the Renesas INTC controller driver

   - ACPI support for Socionext SoCs

   - Enhancements to the CSKY interrupt controller

   - The usual small fixes and cleanups"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  irq/irqdomain: Fix comment typo
  genirq: Update irq stats from NMI handlers
  irqchip/gic-pm: Remove PM_CLK dependency
  irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver
  dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC
  softirq: Use __this_cpu_write() in takeover_tasklets()
  irqchip/mbigen: Stop printing kernel addresses
  irqchip/gic: Add dependency for ARM_GIC_MAX_NR
  genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks()
  genirq/timings: Add selftest for next event computation
  genirq/timings: Add selftest for irqs circular buffer
  genirq/timings: Add selftest for circular array
  genirq/timings: Encapsulate storing function
  genirq/timings: Encapsulate timings push
  genirq/timings: Optimize the period detection speed
  genirq/timings: Fix timings buffer inspection
  genirq/timings: Fix next event index function
  irqchip/qcom: Use struct_size() in devm_kzalloc()
  irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler
  dt-bindings: interrupt-controller: Update csky mpintc
  ...
2019-07-08 11:01:13 -07:00
Linus Torvalds 1758feddb0 s390 updates for the 5.3 merge window
- Improve stop_machine wait logic: replace cpu_relax_yield call in generic
    stop_machine function with a weak stop_machine_yield function. This is
    overridden on s390, which yields the current cpu to the neighbouring cpu
    after a couple of retries, instead of blindly giving up the cpu to the
    hipervisor. This significantly improves stop_machine performance on s390 in
    overcommitted scenarios.
    This includes common code changes which have been Acked by Peter Zijlstra
    and Thomas Gleixner.
 
  - Improve jump label transformation speed: transform jump labels without
    using stop_machine.
 
  - Refactoring of the vfio-ccw cp handling, simplifying the code and
    avoiding unneeded allocating/copying.
 
  - Various vfio-ccw fixes (ccw translation, state machine).
 
  - Add support for vfio-ap queue interrupt control in the guest.
    This includes s390 kvm changes which have been Acked by Christian
    Borntraeger.
 
  - Add protected virtualization support for virtio-ccw.
 
  - Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to remove some
    code which most likely isn't working at all, besides that s390 didn't even
    compile for !CONFIG_SMP.
 
  - Support for special flagged EP11 CPRBs for zcrypt.
 
  - Handle PCI devices with no support for new MIO instructions.
 
  - Avoid KASAN false positives in reworked stack unwinder.
 
  - Couple of fixes for the QDIO layer.
 
  - Convert s390 specific documentation to ReST format.
 
  - Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if hardware is
    missing. This way our modules behave like most other modules and which is
    also what systemd's systemd-modules-load.service expects.
 
  - Replace defconfig with performance_defconfig, so there is one config file
    less to maintain.
 
  - Remove the SCLP call home device driver, which was never useful.
 
  - Cleanups all over the place.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl0iEpcACgkQjYWKoQLX
 FBgtZwf8DOJ6COUG91jKP0RSDlc2YvIMBxopQ38ql1lIsTj5t6DvJ2z3X5uct1wy
 6mMiF01VuyD4V4UXbTJQrihzNx7D4dUh47s2sS+diGHxJyXacVxlmjS5k+6pLIUO
 AyLvtCcoqDPPiThqnSTZFRm/TcfO/25fCG/IdjrFGj1MD09wHpUCh16tmRPTGFlC
 BWZeilDT77fVXnh7Ggn3JB0mQay5PAw2ODOxELHTUBaLmYF8RJPPVKBPmXGl9P1W
 84ESm2p+iALGGWDiTOUad9eu8wyQci/V/R+hFgs0Bz/HRcjznNH5EVvfQNCD4VNF
 g/PET10nIQYZv2BNdi0cwRjR9jCFbw==
 =jp0i
 -----END PGP SIGNATURE-----

Merge tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

 - Improve stop_machine wait logic: replace cpu_relax_yield call in
   generic stop_machine function with a weak stop_machine_yield
   function. This is overridden on s390, which yields the current cpu to
   the neighbouring cpu after a couple of retries, instead of blindly
   giving up the cpu to the hipervisor. This significantly improves
   stop_machine performance on s390 in overcommitted scenarios.

   This includes common code changes which have been Acked by Peter
   Zijlstra and Thomas Gleixner.

 - Improve jump label transformation speed: transform jump labels
   without using stop_machine.

 - Refactoring of the vfio-ccw cp handling, simplifying the code and
   avoiding unneeded allocating/copying.

 - Various vfio-ccw fixes (ccw translation, state machine).

 - Add support for vfio-ap queue interrupt control in the guest. This
   includes s390 kvm changes which have been Acked by Christian
   Borntraeger.

 - Add protected virtualization support for virtio-ccw.

 - Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to
   remove some code which most likely isn't working at all, besides that
   s390 didn't even compile for !CONFIG_SMP.

 - Support for special flagged EP11 CPRBs for zcrypt.

 - Handle PCI devices with no support for new MIO instructions.

 - Avoid KASAN false positives in reworked stack unwinder.

 - Couple of fixes for the QDIO layer.

 - Convert s390 specific documentation to ReST format.

 - Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if
   hardware is missing. This way our modules behave like most other
   modules and which is also what systemd's systemd-modules-load.service
   expects.

 - Replace defconfig with performance_defconfig, so there is one config
   file less to maintain.

 - Remove the SCLP call home device driver, which was never useful.

 - Cleanups all over the place.

* tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits)
  docs: s390: s390dbf: typos and formatting, update crash command
  docs: s390: unify and update s390dbf kdocs at debug.c
  docs: s390: restore important non-kdoc parts of s390dbf.rst
  vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1
  s390/pci: correctly handle MIO opt-out
  s390/pci: deal with devices that have no support for MIO instructions
  s390: ap: kvm: Enable PQAP/AQIC facility for the guest
  s390: ap: implement PAPQ AQIC interception in kernel
  vfio: ap: register IOMMU VFIO notifier
  s390: ap: kvm: add PQAP interception for AQIC
  s390/unwind: cleanup unused READ_ONCE_TASK_STACK
  s390/kasan: avoid false positives during stack unwind
  s390/qdio: don't touch the dsci in tiqdio_add_input_queues()
  s390/qdio: (re-)initialize tiqdio list entries
  s390/dasd: Fix a precision vs width bug in dasd_feature_list()
  s390/cio: introduce driver_override on the css bus
  vfio-ccw: make convert_ccw0_to_ccw1 static
  vfio-ccw: Remove copy_ccw_from_iova()
  vfio-ccw: Factor out the ccw0-to-ccw1 transition
  vfio-ccw: Copy CCW data outside length calculation
  ...
2019-07-08 10:06:12 -07:00
Linus Torvalds dfd437a257 arm64 updates for 5.3:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
 
 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly
 
 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)
 
 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
   and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)
 
 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)
 
 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic
 
 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms
 
 - perf: DDR performance monitor support for iMX8QXP
 
 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers
 
 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent
 
 - arm64 do_page_fault() and hugetlb cleanups
 
 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
 
 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
   introduced in 5.1)
 
 - CONFIG_RANDOMIZE_BASE now enabled in defconfig
 
 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area
 
 - Make ZONE_DMA32 configurable
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl0eHqcACgkQa9axLQDI
 XvFyNA/+L+bnkz8m3ncydlqqfXomQn4eJJVQ8Uksb0knJz+1+3CUxxbO4ry4jXZN
 fMkbggYrDPRKpDbsUl0lsRipj7jW9bqan+N37c3SWqCkgb6HqDaHViwxdx6Ec/Uk
 gHudozDSPh/8c7hxGcSyt/CFyuW6b+8eYIQU5rtIgz8aVY2BypBvS/7YtYCbIkx0
 w4CFleRTK1zXD5mJQhrc6jyDx659sVkrAvdhf6YIymOY8nBTv40vwdNo3beJMYp8
 Po/+0Ixu+VkHUNtmYYZQgP/AGH96xiTcRnUqd172JdtRPpCLqnLqwFokXeVIlUKT
 KZFMDPzK+756Ayn4z4huEePPAOGlHbJje8JVNnFyreKhVVcCotW7YPY/oJR10bnc
 eo7yD+DxABTn+93G2yP436bNVa8qO1UqjOBfInWBtnNFJfANIkZweij/MQ6MjaTA
 o7KtviHnZFClefMPoiI7HDzwL8XSmsBDbeQ04s2Wxku1Y2xUHLx4iLmadwLQ1ZPb
 lZMTZP3N/T1554MoURVA1afCjAwiqU3bt1xDUGjbBVjLfSPBAn/25IacsG9Li9AF
 7Rp1M9VhrfLftjFFkB2HwpbhRASOxaOSx+EI3kzEfCtM2O9I1WHgP3rvCdc3l0HU
 tbK0/IggQicNgz7GSZ8xDlWPwwSadXYGLys+xlMZEYd3pDIOiFc=
 =0TDT
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}

 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly

 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)

 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
   XAFLAG and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)

 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)

 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic

 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms

 - perf: DDR performance monitor support for iMX8QXP

 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers

 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent

 - arm64 do_page_fault() and hugetlb cleanups

 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)

 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
   'arm_boot_flags' introduced in 5.1)

 - CONFIG_RANDOMIZE_BASE now enabled in defconfig

 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area

 - Make ZONE_DMA32 configurable

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
  perf: arm_spe: Enable ACPI/Platform automatic module loading
  arm_pmu: acpi: spe: Add initial MADT/SPE probing
  ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
  ACPI/PPTT: Modify node flag detection to find last IDENTICAL
  x86/entry: Simplify _TIF_SYSCALL_EMU handling
  arm64: rename dump_instr as dump_kernel_instr
  arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
  arm64: Implement panic_smp_self_stop()
  arm64: Improve parking of stopped CPUs
  arm64: Expose FRINT capabilities to userspace
  arm64: Expose ARMv8.5 CondM capability to userspace
  arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
  arm64: ARM64_MODULES_PLTS must depend on MODULES
  arm64: bpf: do not allocate executable memory
  arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
  arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
  arm64: module: create module allocations without exec permissions
  arm64: Allow user selection of ARM64_MODULE_PLTS
  acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
  arm64: Allow selecting Pseudo-NMI again
  ...
2019-07-08 09:54:55 -07:00
Daniel Vetter 75c5bf97ed MAINTAINERS: maintain drm/arm drivers in drm-misc for now
From discussions with Liviu it sounded like the komeda team would
benefit a bit from more cross-review with other drivers. To make sure
komeda is aligned with how similar problems are solved in other
drivers (in the end everyone ends up with similar ideas on how to
solve various display engine design issues).

An option would be to use drm-misc as an incubator for a few kernel
releases, at least until the big design items have been tackled: Aside
from the four kms properties already landed that we need to take out
again there's also a pile of new ones proposed already for komeda.
drm-misc seems to work fairly well at encouraging these kind of
cross-driver reviews and working on cross-driver infrastructure in drm
core. Later on we can move all the drivers out to a dedicated arm tree
again (if that's desired).

Of coures that would mean Lowry and James need drm-misc commit rights
(all other arm contributors have it already I think).

Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-5-daniel.vetter@ffwll.ch
2019-07-08 14:44:49 +01:00
Jeff Layton 1edd1fecae MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
Zheng wants to be able to spend more time working on the MDS, so I've
volunteered to take over for him as the CephFS kernel client maintainer.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08 14:01:45 +02:00
Rafael J. Wysocki 64372c0b7d Merge branches 'acpi-apei', 'acpi-doc' and 'acpi-soc'
* acpi-apei:
  ACPI / APEI: Remove needless __ghes_check_estatus() calls

* acpi-doc:
  docs: extcon: convert it to ReST and move to ACPI dir

* acpi-soc:
  ACPI: APD: remove redundant assignment to pointer clk
2019-07-08 11:04:14 +02:00
Richard Weinberger 1d2af80d58 NAND core changes:
- use longest matching pattern in ->exec_op() default parser
 - export NAND operation tracer
 - add flag to indicate panic_write in MTD
 - use kzalloc() instead of kmalloc() and memset()
 
 Raw NAND controller drivers changes:
 - brcmnand:
   * fix BCH ECC layout for large page NAND parts
   * fallback to detected ecc-strength, ecc-step-size
   * when oops in progress use pio and interrupt polling
   * code refactor code to introduce helper functions
   * add support for v7.3 controller
 - FSMC:
   * use nand_op_trace for operation tracing
 - GPMI:
   * move all driver code into single file
   * various cleanups (including dmaengine changes)
   * use runtime PM to manage clocks
   * implement exec_op
 - MTK:
   * correct low level time calculation of r/w cycle
   * improve data sampling timing for read cycle
   * add validity check for CE# pin setting
   * fix wrongly assigned OOB buffer pointer issue
   * re-license MTK NAND driver as Dual MIT/GPL
 - STM32:
   * manage the get_irq error case
   * increase DMA completion timeouts
 
 Raw NAND chips drivers changes:
 - Macronix: add read-retry support
 
 Onenand driver changes:
 - add support for 8Gb datasize chips
 - avoid fall-through warnings
 
 SPI-NAND changes:
 - define macros for page-read ops with three-byte addresses
 - add support for two-byte device IDs and then for GigaDevice
   GD5F1GQ4UFxxG
 - add initial support for Paragon PN26G0xA
 - handle the case where the last page read has bitflips
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl0fxH8ACgkQJWrqGEe9
 VoRq5wgApOTmT44UiI3XHQZMWANcW5/DkNwXEzXtdRQJHv1m3eqny1faGOYJZifZ
 eb0TpohK0783L4STii7g1iplBA+c8UGJaS1bpn9HoN3us8wxXn51fzHHj5G3z2tR
 xoyaEm7w7dZuqe/FLCW+MbtOREAq1GzullVZxrd75wxNyK3cQXawqYDsil6I5fl7
 sf2zMzfzfGK6LqbapOHorxyI8yJR712TLPwBq7amHpPZMXOny0gIlYVXLv6jYAfr
 3RcW0YpyplBjLAFKBOpVLPJ61c9NVQSsdQ2wviRckhrMgCD83f7YDmAACxM0rvSz
 lVYcHHqoqYHlTDPVBebeoifQOb4uUw==
 =I5Hg
 -----END PGP SIGNATURE-----

Merge tag 'nand/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

NAND core changes:
- use longest matching pattern in ->exec_op() default parser
- export NAND operation tracer
- add flag to indicate panic_write in MTD
- use kzalloc() instead of kmalloc() and memset()

Raw NAND controller drivers changes:
- brcmnand:
  * fix BCH ECC layout for large page NAND parts
  * fallback to detected ecc-strength, ecc-step-size
  * when oops in progress use pio and interrupt polling
  * code refactor code to introduce helper functions
  * add support for v7.3 controller
- FSMC:
  * use nand_op_trace for operation tracing
- GPMI:
  * move all driver code into single file
  * various cleanups (including dmaengine changes)
  * use runtime PM to manage clocks
  * implement exec_op
- MTK:
  * correct low level time calculation of r/w cycle
  * improve data sampling timing for read cycle
  * add validity check for CE# pin setting
  * fix wrongly assigned OOB buffer pointer issue
  * re-license MTK NAND driver as Dual MIT/GPL
- STM32:
  * manage the get_irq error case
  * increase DMA completion timeouts

Raw NAND chips drivers changes:
- Macronix: add read-retry support

Onenand driver changes:
- add support for 8Gb datasize chips
- avoid fall-through warnings

SPI-NAND changes:
- define macros for page-read ops with three-byte addresses
- add support for two-byte device IDs and then for GigaDevice
  GD5F1GQ4UFxxG
- add initial support for Paragon PN26G0xA
- handle the case where the last page read has bitflips
2019-07-06 22:51:56 +02:00
Linus Torvalds bcc0e65f47 A few more MIPS fixes:
- Fix a silly typo in virt_addr_valid which led to completely bogus
   behavior (that happened to stop tripping up hardened usercopy despite
   being broken).
 
 - Fix UART parity setup on AR933x systems.
 
 - A build fix for non-Linux build machines.
 
 - Have the 'all' make target build DTBs, primarily to fit in with the
   behavior of scripts/package/builddeb.
 
 - Handle an execution hazard in TLB exceptions that use KScratch
   registers, which could inadvertently clobber the $1 register on some
   generally higher-end out-of-order CPUs.
 
 - A MAINTAINERS update to fix the path to the NAND driver for Ingenic
   systems.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXSDJfhUccGF1bC5idXJ0
 b25AbWlwcy5jb20ACgkQPqefrLV1AN35ygEA30KckazfjbtmW0EqD+C19sgtbSS3
 eCAiweHHwLJoyUUBAJ/HzlZ8ap2X9ilZuFdzKEf1igj5WsLIyrkl6kkauUEA
 =DRYO
 -----END PGP SIGNATURE-----

Merge tag 'mips_fixes_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Paul Burton:
 "A few more MIPS fixes:

   - Fix a silly typo in virt_addr_valid which led to completely bogus
     behavior (that happened to stop tripping up hardened usercopy
     despite being broken).

   - Fix UART parity setup on AR933x systems.

   - A build fix for non-Linux build machines.

   - Have the 'all' make target build DTBs, primarily to fit in with the
     behavior of scripts/package/builddeb.

   - Handle an execution hazard in TLB exceptions that use KScratch
     registers, which could inadvertently clobber the $1 register on
     some generally higher-end out-of-order CPUs.

   - A MAINTAINERS update to fix the path to the NAND driver for Ingenic
     systems"

* tag 'mips_fixes_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MAINTAINERS: Correct path to moved files
  MIPS: Add missing EHB in mtc0 -> mfc0 sequence.
  MIPS: have "plain" make calls build dtbs for selected platforms
  MIPS: fix build on non-linux hosts
  MIPS: ath79: fix ar933x uart parity mode
  MIPS: Fix bounds check virt_addr_valid
2019-07-06 10:32:12 -07:00
Mark Brown 043b35f281
Merge branch 'asoc-5.3' into asoc-next 2019-07-06 12:25:26 +01:00
Dmitry Osipenko f3a3ea28ed i2c: tegra: Add Dmitry as a reviewer
I'm contributing to Tegra's upstream development in general and happened
to review the Tegra's I2C patches for awhile because I'm actively using
upstream kernel on all of my Tegra-powered devices and initially some of
the submitted patches were getting my attention since they were causing
problems. Recently Wolfram Sang asked whether I'm interested in becoming
a reviewer for the driver and I don't mind at all.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[wsa: ack was expressed by Thierry Reding in a mail thread]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-07-05 20:46:56 +02:00
Mark Brown 106dbe24d4
Merge branch 'spi-5.3' into spi-next 2019-07-04 17:35:07 +01:00
Mark Brown 65244e5b1f
Merge branch 'regulator-5.3' into regulator-next 2019-07-04 17:34:32 +01:00
Mauro Carvalho Chehab 9b5db89ea4 docs: misc-devices: convert files without extension to ReST
Those files are also text files. Convert them to ReST and add
to the misc-files index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/b7dc829809673bd8cffe0e7bbe9c9308681c6fe2.1561756511.git.mchehab+samsung@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03 21:09:41 +02:00
David S. Miller c3ead2df97 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2019-07-03

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH
   on BE architectures, from Jiong.

2) Fix several bugs in the x32 BPF JIT for handling shifts by 0,
   from Luke and Xi.

3) Fix NULL pointer deref in btf_type_is_resolve_source_only(),
   from Stanislav.

4) Properly handle the check that forwarding is enabled on the device
   in bpf_ipv6_fib_lookup() helper code, from Anton.

5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit
   alignment such as m68k, from Baruch.

6) Fix kernel hanging in unregister_netdevice loop while unregistering
   device bound to XDP socket, from Ilya.

7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan.

8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri.

9) Fix bpftool to use correct argument in cgroup errors, from Jakub.

10) Fix detaching dummy prog in XDP redirect sample code, from Prashant.

11) Add Jonathan to AF_XDP reviewers, from Björn.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03 12:09:00 -07:00
Srinivas Pandruvada 3dda617a14 MAINTAINERS: Update for Intel Speed Select Technology
Added myself as the maintainer.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-07-03 15:37:09 +03:00
Mauro Carvalho Chehab 5d8cbf7176 docs: extcon: convert it to ReST and move to ACPI dir
The intel-int3496.txt file is a documentation for an ACPI driver.

There's no reason to keep it on a separate directory.

So, instead of keeping it on some random location, move it
to a sub-directory inside the ACPI documentation dir,
renaming it to .rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-03 13:00:26 +02:00
Russell King 1f6db18fbd Merge branch 'sa1100-for-next'; commit 'riscpc^{/ARM: riscpc: enable chained scatterlist support}' into for-arm-soc 2019-07-03 11:44:46 +01:00
Michael Kelley fd1fea6834 clocksource/drivers: Make Hyper-V clocksource ISA agnostic
Hyper-V clock/timer code and data structures are currently mixed
in with other code in the ISA independent drivers/hv directory as
well as the ISA dependent Hyper-V code under arch/x86.

Consolidate this code and data structures into a Hyper-V clocksource driver
to better follow the Linux model. In doing so, separate out the ISA
dependent portions so the new clocksource driver works for x86 and for the
in-process Hyper-V on ARM64 code.

To start, move the existing clockevents code to create the new clocksource
driver. Update the VMbus driver to call initialization and cleanup routines
since the Hyper-V synthetic timers are not independently enumerated in
ACPI.

No behavior is changed and no new functionality is added.

Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "bp@alien8.de" <bp@alien8.de>
Cc: "will.deacon@arm.com" <will.deacon@arm.com>
Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com>
Cc: "mark.rutland@arm.com" <mark.rutland@arm.com>
Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org>
Cc: "olaf@aepfle.de" <olaf@aepfle.de>
Cc: "apw@canonical.com" <apw@canonical.com>
Cc: "jasowang@redhat.com" <jasowang@redhat.com>
Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com>
Cc: Sunil Muthuswamy <sunilmut@microsoft.com>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: "sashal@kernel.org" <sashal@kernel.org>
Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com>
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org>
Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org>
Cc: "arnd@arndb.de" <arnd@arndb.de>
Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk>
Cc: "ralf@linux-mips.org" <ralf@linux-mips.org>
Cc: "paul.burton@mips.com" <paul.burton@mips.com>
Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>
Cc: "salyzyn@android.com" <salyzyn@android.com>
Cc: "pcc@google.com" <pcc@google.com>
Cc: "shuah@kernel.org" <shuah@kernel.org>
Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com>
Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk>
Cc: "huw@codeweavers.com" <huw@codeweavers.com>
Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au>
Cc: "pbonzini@redhat.com" <pbonzini@redhat.com>
Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com>
Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org>
Link: https://lkml.kernel.org/r/1561955054-1838-2-git-send-email-mikelley@microsoft.com
2019-07-03 11:00:59 +02:00
Andrew Jeffery 053d8b2467 MAINTAINERS: Add entry for ASPEED pinctrl drivers
Add myself as maintainer to avoid burdening others with the madness.

Cc: Johnny Huang <johnny_huang@aspeedtech.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20190628023838.15426-5-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03 10:34:36 +02:00
Talel Shenhar 1eb77c3bcd irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver
The Amazon's Annapurna Labs Fabric Interrupt Controller has 32 inputs.
A FIC (Fabric Interrupt Controller) may be cascaded into another FIC or
directly to the main CPU Interrupt Controller (e.g. GIC).

Signed-off-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-03 09:19:11 +01:00
Greg Kroah-Hartman b9b667a0c7 FSI changes for 5.3
- Add MAINTAINERS entry. There is now a git tree and a mailing
  list/patchwork for collecting FSI patches
 
  - Bug fix for error driver registration error paths
 
  - Correction for the OCC hwmon driver to meet the spec
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAl0cIIIACgkQa3ZZB4FH
 cJ6z0A//Qy3eu/+s01kq8BAThP77QRyoQP+D7oMoGpr2KxK+82MtFwsuX/vLpcsu
 rYTLn+2xPzY+dWCQx6nWaIij/dkPDWikVarW2+fdMrLhk76XwwkVXPD4J4lUHtVx
 juTWPxLmo7ZAxtwMHyE86hjLR1oTmwZ/arnXYojQ2dka1CZxqpEo7YkRPBLkGjU7
 EcXuCcIGl5ETB9drVsdA8lArLFdgfL/ZFYyEF0epc9KgYrGvJdu1ZdT6bzJkn6C3
 rkCKzQF6fZdszNpo92mjUhkyP3MnnrSVdQPRb/D5wfY9EApfj1YRWS5ikts2lrEf
 tNBat9KJ5nn2AX8FUEKuJazks5ddQk5GOLw6U4vgVayQ0gL8HqofiqybvzKvpX0S
 B0ey0u2d+GeMwiNR+QUNgrnqbbbqy9rLaW8p4zfB70v5qOP8BfWQqnSq+utSqIWZ
 M7xKcial5vQqnBTz0pw+CXVZc0SPD0O7DaK1BmCVOumMAO746eNCPQEwIQVl3Fjt
 FW00qPDWrLnRfdusBWB5mky8b79cnfLht+hLh82gFEeSXpHsRx6rG5luT7moasSK
 EmbXcMM13iVznQk+2IVWWeAXdSDo0yA0eW1SBNBHdrUrdp6jW5pLbDb/F8s+jwQK
 rNYE4IwZYM34L+E/CsFQZw3o5XQy0fsEv6/0tFjjiQPwLeZJZzI=
 =3yOz
 -----END PGP SIGNATURE-----

Merge tag 'fsi-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next

Joel writes:

FSI changes for 5.3

 - Add MAINTAINERS entry. There is now a git tree and a mailing
 list/patchwork for collecting FSI patches

 - Bug fix for error driver registration error paths

 - Correction for the OCC hwmon driver to meet the spec

* tag 'fsi-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi:
  fsi/core: Fix error paths on CFAM init
  OCC: FSI and hwmon: Add sequence numbering
  MAINTAINERS: Add FSI subsystem
2019-07-03 09:21:25 +02:00
Joel Stanley 60c87bc531 MAINTAINERS: Add FSI subsystem
The subsystem was merged some time ago but we did not have a maintainers
entry. The mailing list exists to allow our patchwork to slurp up the
patches. The tree will be co-maintained by myself and Jeremy.

Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-03 10:41:22 +09:30
Bernard Metzler c0cf5bdde4 rdma/siw: addition to kernel build environment
Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02 17:03:41 -03:00