As done for rtl8723bs and r8188eu, drop get_recvframe_data(), as it
introduces an impossible value (NULL) for the compiler to check code
paths against which could result in nonsensical warnings.
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Cc: Ivan Safonov <insafonov@gmail.com>
Cc: linux-staging@lists.linux.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220118193327.2822099-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch switches to <linux/ieee80211.h> and <net/cfg80211.h> and
deletes a lot of duplicate definitions plus many unused ones.
Non obvious changes:
- struct ieee80211_ht_cap is different enough that I preferred to keep
(and rename) it for now.
- mcs_rate in translate_scan was not read after being set, so I deleted
that part rather than using the renamed struct
- WLAN_CAPABILITY_BSS is replaced with WLAN_CAPABILITY_ESS which is the
corresponding one with same value
Signed-off-by: Pascal Terjan <pterjan@google.com>
Link: https://lore.kernel.org/r/20200609194848.166130-1-pterjan@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes for simple typos in C comments.
Found using checkpatch.pl.
Signed-off-by: R Veera Kumar <vkor@vkten.in>
Link: https://lore.kernel.org/r/20200312091042.GA4246@tulip.local
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change return type of r8712_free_recvframe from int to void as it always
returns _SUCCESS and its return value is never used.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-8-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning "Block comments use a trailing */ on
a separate line" on multiple files of the driver by editing the
affected comments.
Signed-off-by: Raphaël Beamonte <raphael.beamonte@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
unused variables are removed. These variables were only assigned some
values and after that they were never being used. So they are safe to
be removed , and it has been build tested.
I left a call to r8712_read32(padapter, TCR) and
r8712_read8(padapter, SDIO_HCPWM) .
r8712_read32() and r8712_read8() is ultimately calling usb_read32()
and usb_read8() respectively. and they are again calling
r8712_usbctrl_vendorreq().
this r8712_usbctrl_vendorreq() is communicating through the usb bus
and is sending and receiving the control msg.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no implementation of these functions anywhere in the code.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I am preparing to convert this driver from semaphore to mutex locking,
The first step has been to eliminate a number of semaphores that were
initialized but never used, and one whose only use was a single "up"
after initialization. A total of 9 semaphores were removed in this process.
One other change was to remove some inline semaphore routines that were
unused.
In addition, several cases had the following structure:
down()
if () {
...
}
up()
The locking overhead was reduced by moving the up/down inside the if
block.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed some style and format issues with headers.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This code is for a completely new version of the Realtek 8192 USB devices
such as the D-Link DWA-130. The Realtek code, which was originally for
Linux, Windows XP and Windows CE, has been stripped of all code not needed
for Linux. In addition, only one additional configuration variable, which
enables AP mode, remains.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Tested-by: Frederic Leroy <fredo@starox.org>
Kees Cook