Defer removal of current primary MAC until a replacement is successfully
added. Previous implementation would left filter list with no primary MAC.
This was found while reading the code.
The patch takes advantage of the fact that there can only be a single primary
MAC filter at any time ([1] by Piotr)
Piotr has also applied some review suggestions during our internal patch
submittal process.
[1] https://lore.kernel.org/netdev/20230614145302.902301-2-piotrx.gardocki@intel.com/
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----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=9NBP
-----END PGP SIGNATURE-----
Merge tag 'nf-23-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
This is v3, including a crash fix for patch 01/14.
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix UDP segmentation with IPVS tunneled traffic, from Terin Stock.
2) Fix chain binding transaction logic, add a bound flag to rule
transactions. Remove incorrect logic in nft_data_hold() and
nft_data_release().
3) Add a NFT_TRANS_PREPARE_ERROR deactivate state to deal with releasing
the set/chain as a follow up to 1240eb93f0 ("netfilter: nf_tables:
incorrect error path handling with NFT_MSG_NEWRULE")
4) Drop map element references from preparation phase instead of
set destroy path, otherwise bogus EBUSY with transactions such as:
flush chain ip x y
delete chain ip x w
where chain ip x y contains jump/goto from set elements.
5) Pipapo set type does not regard generation mask from the walk
iteration.
6) Fix reference count underflow in set element reference to
stateful object.
7) Several patches to tighten the nf_tables API:
- disallow set element updates of bound anonymous set
- disallow unbound anonymous set/chain at the end of transaction.
- disallow updates of anonymous set.
- disallow timeout configuration for anonymous sets.
8) Fix module reference leak in chain updates.
9) Fix nfnetlink_osf module autoload.
10) Fix deletion of basechain when NFTA_CHAIN_HOOK is specified as
in iptables-nft.
This Netfilter batch is larger than usual at this stage, I am aware we
are fairly late in the -rc cycle, if you prefer to route them through
net-next, please let me know.
netfilter pull request 23-06-21
* tag 'nf-23-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Fix for deleting base chains with payload
netfilter: nfnetlink_osf: fix module autoload
netfilter: nf_tables: drop module reference after updating chain
netfilter: nf_tables: disallow timeout for anonymous sets
netfilter: nf_tables: disallow updates of anonymous sets
netfilter: nf_tables: reject unbound chain set before commit phase
netfilter: nf_tables: reject unbound anonymous set before commit phase
netfilter: nf_tables: disallow element updates of bound anonymous sets
netfilter: nf_tables: fix underflow in object reference counter
netfilter: nft_set_pipapo: .walk does not deal with generations
netfilter: nf_tables: drop map element references from preparation phase
netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
netfilter: nf_tables: fix chain binding transaction logic
ipvs: align inner_mac_header for encapsulation
====================
Link: https://lore.kernel.org/r/20230621100731.68068-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When building the latest kernel/selftest with clang17 compiler:
make LLVM=1 -j <== for kernel
make -C tools/testing/selftests/bpf LLVM=1 -j <== for selftest
I hit the following compilation error:
[...]
In file included from progs/vrf_socket_lookup.c:3:
In file included from /usr/include/linux/ip.h:21:
In file included from /usr/include/asm/byteorder.h:5:
In file included from /usr/include/linux/byteorder/little_endian.h:13:
/usr/include/linux/swab.h:136:8: error: unknown type name '__always_inline'
136 | static __always_inline unsigned long __swab(const unsigned long y)
| ^
/usr/include/linux/swab.h:171:8: error: unknown type name '__always_inline'
171 | static __always_inline __u16 __swab16p(const __u16 *p)
| ^
/usr/include/linux/swab.h:171:29: error: expected ';' after top level declarator
171 | static __always_inline __u16 __swab16p(const __u16 *p)
| ^
[...]
Basically, with header files in my local host which is based on 5.12 kernel,
__always_inline is not defined and this caused compilation failure.
Since __always_inline is defined in bpf_helpers.h, let us move bpf_helpers.h
to an early position which fixed the problem.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230622061921.816772-1-yhs@fb.com
This reverts commit 1f86123b97 ("net: align SO_RCVMARK required
privileges with SO_MARK") because the reasoning in the commit message
is not really correct:
SO_RCVMARK is used for 'reading' incoming skb mark (via cmsg), as such
it is more equivalent to 'getsockopt(SO_MARK)' which has no priv check
and retrieves the socket mark, rather than 'setsockopt(SO_MARK) which
sets the socket mark and does require privs.
Additionally incoming skb->mark may already be visible if
sysctl_fwmark_reflect and/or sysctl_tcp_fwmark_accept are enabled.
Furthermore, it is easier to block the getsockopt via bpf
(either cgroup setsockopt hook, or via syscall filters)
then to unblock it if it requires CAP_NET_RAW/ADMIN.
On Android the socket mark is (among other things) used to store
the network identifier a socket is bound to. Setting it is privileged,
but retrieving it is not. We'd like unprivileged userspace to be able
to read the network id of incoming packets (where mark is set via
iptables [to be moved to bpf])...
An alternative would be to add another sysctl to control whether
setting SO_RCVMARK is privilged or not.
(or even a MASK of which bits in the mark can be exposed)
But this seems like over-engineering...
Note: This is a non-trivial revert, due to later merged commit e42c7beee7
("bpf: net: Consider has_current_bpf_ctx() when testing capable() in sk_setsockopt()")
which changed both 'ns_capable' into 'sockopt_ns_capable' calls.
Fixes: 1f86123b97 ("net: align SO_RCVMARK required privileges with SO_MARK")
Cc: Larysa Zaremba <larysa.zaremba@intel.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Patrick Rohr <prohr@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230618103130.51628-1-maze@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
struct mux_adth actually ends with multiple struct mux_adth_dg members.
This is seen both in the comments about the member:
/**
* struct mux_adth - Structure of the Aggregated Datagram Table Header.
...
* @dg: datagramm table with variable length
*/
and in the preparation for populating it:
adth_dg_size = offsetof(struct mux_adth, dg) +
ul_adb->dg_count[i] * sizeof(*dg);
...
adth_dg_size -= offsetof(struct mux_adth, dg);
memcpy(&adth->dg, ul_adb->dg[i], adth_dg_size);
This was reported as a run-time false positive warning:
memcpy: detected field-spanning write (size 16) of single field "&adth->dg" at drivers/net/wwan/iosm/iosm_ipc_mux_codec.c:852 (size 8)
Adjust the struct mux_adth definition and associated sizeof() math; no binary
output differences are observed in the resulting object file.
Reported-by: Florian Klink <flokli@flokli.de>
Closes: https://lore.kernel.org/lkml/dbfa25f5-64c8-5574-4f5d-0151ba95d232@gmail.com/
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Cc: M Chetan Kumar <m.chetan.kumar@intel.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Intel Corporation <linuxwwan@intel.com>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620194234.never.023-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.
If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.
Fix this by setting the neighbor's state to permanent in a couple of
tests, so that it is always valid.
Fixes: 35c31d5c32 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d")
Fixes: 239e754af8 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/268816ac729cb6028c7a34d4dda6f4ec7af55333.1687264607.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the TX FIFO size read from CAN controller register, instead of using
hard coded value.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-15-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add support for the Classical CAN raw DLC functionality to send and receive
DLC values from 9 .. 15.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-13-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Replace opencoded masking and shifting, with GENMASK, FIELD_GET and
FIELD_PREP macros.
Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-12-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sort the registers defines, in the same order as the register bits/fields
are defined.
Sort register bits/fields in MSB-to-LSB order.
Update and add comments.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-11-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Change return type to void for kvaser_pciefd_transmit_irq(),
kvaser_pciefd_receive_irq() and kvaser_pciefd_set_tx_irq().
These functions always return zero.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-10-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Rename device ID defines to better match the product name of the supported
device.
Use 16 bit hexadecimal values for device IDs.
And format kvaser_pciefd_id_table using clang-format.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-9-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sort the includes in alphabetic order.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-8-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Remove SPI flash parameter read functionality, since it's only used for
reading the interface CAN controller count.
This information is already read from a register, making the information
redundant.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-7-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
CAN_RAW_FILTER_MAX is only relevant for CAN_RAW sockets and used in
linux/can/raw.c or in userspace applications that include the raw.h
file anyway.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230609121051.9631-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Define unsigned constants with type suffix 'U'
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-6-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Set hardware timestamp on transmitted packets.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add new function, kvaser_pciefd_set_skb_timestamp(), to set skb hwtstamps.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The Kvaser KCAN controller got a feature to send error frames on request.
The packet KVASER_PCIEFD_PACK_TYPE_EFRAME_ACK signals that the requested
error frame was transmitted.
Since this feature is not supported by the driver, drop the handler and add
KVASER_PCIEFD_PACK_TYPE_EFRAME_ACK to the list of unexpected packet types.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The PCI interrupt register, KVASER_PCIEFD_IRQ_REG, is level triggered.
Writing to the register doesn't affect it.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says:
When created in [1], frames length definitions were added to implement
byte queue limits (bql). Because bql expects lengths in bytes, bit
length definitions were not considered back then.
Recently, a need to refer to the exact frame length in bits, with CAN
bit stuffing, appeared in [2].
This series introduces can_frame_bits(): a function-like macro that
can calculate the exact size of a CAN(-FD) frame in bits with or
without bitsuffing.
[1] commit 85d99c3e2a ("can: length: can_skb_get_frame_len(): introduce
function to get data length of frame in data link layer")
Link: https://git.kernel.org/torvalds/c/85d99c3e2a13
[2] RE: [PATCH] can: mcp251xfd: Increase poll timeout
Link: https://lore.kernel.org/linux-can/BL3PR11MB64846C83ACD04E9330B0FE66FB729@BL3PR11MB6484.namprd11.prod.outlook.com
* Changelog *
v4 -> v5:
* In __can_cc_frame_bits() and __can_fd_frame_bits(), enclose
data_len in brackets to prevent operator precedence issues.
* Add a note in can_frame_bits() documentation to explain that
data_len shall have no side effects.
* While at it, make CAN(FD)_FRAME_LEN_MAX definition fit on a single
line.
* A few typo/grammar small fixes in the commit descriptions.
Link: https://lore.kernel.org/linux-can/20230601165625.100040-1-mailhol.vincent@wanadoo.fr
v3 -> v4:
* No functional changes.
* as reported by Simon Horman, fix typo in the documentation of
can_bitstuffing_len(): "bitstream_len" -> "destuffed_len".
* as reported by Thomas Kopp, fix several other typos:
- "indicatior" -> "indicator"
- "in on the wire" -> "on the wire"
- "bitsuffing" -> "bitstuffing".
* in CAN_FRAME_LEN_MAX comment: specify that only the dynamic
bitstuffing gets ignored but that the intermission is included.
* move the Suggested-by: Thomas Kopp tag from patch 2 to patch 3.
* add Reviewed-by: Thomas Kopp tag on the full series.
* add an additional line of comment for the @intermission argument
of can_frame_bits().
Link: https://lore.kernel.org/linux-can/20230530144637.4746-1-mailhol.vincent@wanadoo.fr
v2 -> v3:
* turn can_frame_bits() and can_frame_bytes() into function-like
macros. The fact that inline functions can not be used to
initialize constant struct fields was bothering me. I did my best
to make the macro look as less ugly as possible.
* as reported by Simon Horman, add missing document for the is_fd
argument of can_frame_bits().
Link: https://lore.kernel.org/linux-can/20230523065218.51227-1-mailhol.vincent@wanadoo.fr
v1 -> v2:
* as suggested by Thomas Kopp, add a new patch to the series to fix
the stuff bit count and the fixed stuff bits definitions
* and another patch to fix documentation of the Remote Request
Substitution (RRS).
* refactor the length definition. Instead of using individual macro,
rely on an inline function. One reason is to minimize the number
of definitions. Another reason is that because the dynamic bit
stuff is calculated differently for CAN and CAN-FD, it is just not
possible to multiply the existing CANFD_FRAME_OVERHEAD_SFF/EFF by
the overhead ratio to get the bitsuffing: for CAN-FD, the CRC
field is already stuffed by the fixed stuff bits and is out of
scope of the dynamic bitstuffing.
Link: https://lore.kernel.org/linux-can/20230507155506.3179711-1-mailhol.vincent@wanadoo.fr
Link: https://lore.kernel.org/all/20230611025728.450837-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Introduce a method to calculate the exact size in bits of a CAN(-FD)
frame with or without dynamic bitstuffing.
These are all the possible combinations taken into account:
- Classical CAN or CAN-FD
- Standard or Extended frame format
- CAN-FD CRC17 or CRC21
- Include or not intermission
Instead of doing several individual macro definitions, declare the
can_frame_bits() function-like macro. To this extent, do a full
refactoring of the length definitions.
In addition add the can_frame_bytes(). This function-like macro
replaces the existing macro:
- CAN_FRAME_OVERHEAD_SFF: can_frame_bytes(false, false, 0)
- CAN_FRAME_OVERHEAD_EFF: can_frame_bytes(false, true, 0)
- CANFD_FRAME_OVERHEAD_SFF: can_frame_bytes(true, false, 0)
- CANFD_FRAME_OVERHEAD_EFF: can_frame_bytes(true, true, 0)
Function-like macros were chosen over inline functions because they
can be used to initialize const struct fields.
The different maximum frame lengths (maximum data length, including
intermission) are as follow:
Frame type bits bytes
-------------------------------------------------------
Classic CAN SFF no bitstuffing 111 14
Classic CAN EFF no bitstuffing 131 17
Classic CAN SFF bitstuffing 135 17
Classic CAN EFF bitstuffing 160 20
CAN-FD SFF no bitstuffing 579 73
CAN-FD EFF no bitstuffing 598 75
CAN-FD SFF bitstuffing 712 89
CAN-FD EFF bitstuffing 736 92
The macro CAN_FRAME_LEN_MAX and CANFD_FRAME_LEN_MAX are kept as an
alias to, respectively, can_frame_bytes(false, true, CAN_MAX_DLEN) and
can_frame_bytes(true, true, CANFD_MAX_DLEN).
In addition to the above:
- Use ISO 11898-1:2015 definitions for the names of the CAN frame
fields.
- Include linux/bits.h for use of BITS_PER_BYTE.
- Include linux/math.h for use of mult_frac() and
DIV_ROUND_UP(). N.B: the use of DIV_ROUND_UP() is not new to this
patch, but the include was previously omitted.
- Add copyright 2023 for myself.
Suggested-by: Thomas Kopp <Thomas.Kopp@microchip.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Thomas Kopp <Thomas.Kopp@microchip.com>
Link: https://lore.kernel.org/all/20230611025728.450837-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The Stuff Bit Count is always coded on 4 bits [1]. Update the Stuff
Bit Count size accordingly.
In addition, the CRC fields of CAN FD Frames contain stuff bits at
fixed positions called fixed stuff bits [2]. The CRC field starts with
a fixed stuff bit and then has another fixed stuff bit after each
fourth bit [2], which allows us to derive this formula:
FSB count = 1 + round_down(len(CRC field)/4)
The length of the CRC field is [1]:
len(CRC field) = len(Stuff Bit Count) + len(CRC)
= 4 + len(CRC)
with len(CRC) either 17 or 21 bits depending of the payload length.
In conclusion, for CRC17:
FSB count = 1 + round_down((4 + 17)/4)
= 6
and for CRC 21:
FSB count = 1 + round_down((4 + 21)/4)
= 7
Add a Fixed Stuff bits (FSB) field with above values and update
CANFD_FRAME_OVERHEAD_SFF and CANFD_FRAME_OVERHEAD_EFF accordingly.
[1] ISO 11898-1:2015 section 10.4.2.6 "CRC field":
The CRC field shall contain the CRC sequence followed by a recessive
CRC delimiter. For FD Frames, the CRC field shall also contain the
stuff count.
Stuff count
If FD Frames, the stuff count shall be at the beginning of the CRC
field. It shall consist of the stuff bit count modulo 8 in a 3-bit
gray code followed by a parity bit [...]
[2] ISO 11898-1:2015 paragraph 10.5 "Frame coding":
In the CRC field of FD Frames, the stuff bits shall be inserted at
fixed positions; they are called fixed stuff bits. There shall be a
fixed stuff bit before the first bit of the stuff count, even if the
last bits of the preceding field are a sequence of five consecutive
bits of identical value, there shall be only the fixed stuff bit,
there shall not be two consecutive stuff bits. A further fixed stuff
bit shall be inserted after each fourth bit of the CRC field [...]
Fixes: 85d99c3e2a ("can: length: can_skb_get_frame_len(): introduce function to get data length of frame in data link layer")
Suggested-by: Thomas Kopp <Thomas.Kopp@microchip.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Thomas Kopp <Thomas.Kopp@microchip.com>
Link: https://lore.kernel.org/all/20230611025728.450837-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The CAN-FD frames only have one reserved bit. The bit corresponding to
Classical CAN frame's RTR bit is called the "Remote Request
Substitution (RRS)" [1].
N.B. The RRS is not to be confused with the Substitute Remote Request
(SRR).
Fix the description in the CANFD_FRAME_OVERHEAD_SFF/EFF macros.
The total remains unchanged, so this is just a documentation fix.
In addition to the above add myself as copyright owner for 2020 (as
coauthor of the initial version, c.f. Fixes tag).
[1] ISO 11898-1:2015 paragraph 10.4.2.3 "Arbitration field":
RSS bit [only in FD Frames]
The RRS bit shall be transmitted in FD Frames at the position of
the RTR bit in Classical Frames. The RRS bit shall be transmitted
dominant, but receivers shall accept recessive and dominant RRS
bits.
Fixes: 85d99c3e2a ("can: length: can_skb_get_frame_len(): introduce function to get data length of frame in data link layer")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Thomas Kopp <Thomas.Kopp@microchip.com>
Link: https://lore.kernel.org/all/20230611025728.450837-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch aligns code to match open parenthesis and removes a
trailing whitespace.
Fixes: eb38c2053b ("can: rx-offload: rename can_rx_offload_queue_sorted() -> can_rx_offload_queue_timestamp()")
Fixes: f5071d9e72 ("can: m_can: m_can_handle_bus_errors(): add support for handling DLEC error on CAN-FD frames")
Reported-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/all/20230523062410.1984098-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In their RZN1 SoC, Renesas put a CAN controller supposed to act very
similarly to the original Philips sja1000. In practice, while flooding
the bus with another device, we discovered that the controller very
often after an overrun situation would just refuse any new frame, drop
them all and trigger over and over again the overrun interrupt, even
though the buffer would have been totally emptied. The controller acts
like if its internal buffer offsets (where it writes and where the host
reads) where totally screwed-up.
Renesas manual mentions a single action to perform in order to
resynchronize the read and write offsets within the buffer: performing
a soft reset.
Performing a soft reset takes a bit of time and involves small delays,
so better do that in a threaded handler rather than inside the hard IRQ
handler.
Add platform data to recognize the platforms which need this workaround,
and when the faulty situation is diagnosed, stop what is being
performed and request the threaded handler to be executed in order to
perform the reset.
Tested-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com> # 5.10
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/all/20230616134553.2786391-2-miquel.raynal@bootlin.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In order to support a flavor of the sja1000 which sometimes freezes, it
will be needed upon certain interrupts to perform a soft reset. The soft
reset operation takes a bit of time, so better not do it within the hard
interrupt handler but rather in a threaded handler. Let's prepare the
possibility for sja1000_err() to request "interrupting" the current flow
and request the threaded handler to be run while keeping the interrupt
line low.
There is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/all/20230616134553.2786391-1-miquel.raynal@bootlin.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Rename the following macros:
- ESD_RTR to ESD_USB_RTR
- ESD_EV_CAN_ERROR_EXT to ESD_USB_EV_CAN_ERROR_EXT
Additionally remove the double newline trailing to definition
of ESD_USB_RTR.
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: https://lore.kernel.org/r/20230523173105.3175086-3-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Frank Jungclaus <frank.jungclaus@esd.eu> says:
Apply another small batch of patches as preparation for adding support
of the newly available esd CAN-USB/3 to esd_usb.c.
v1 -> v2:
* Make use of GENMASK() macro for ESD_USB_NO_BAUDRATE and
ESD_USB_IDMASK
* Also use the BIT() macro for ESD_USB2_3_SAMPLES
* Removed comments with redundant hexadecimal values from
BIT()-constants
* Reworded (shortened) the commit messages
* Changed the macro ESD_USB_3_SAMPLES to ESD_USB_TRIPLE_SAMPLES
v1:
* Link: https://lore.kernel.org/all/20230517192251.2405290-1-frank.jungclaus@esd.eu
Link: https://lore.kernel.org/r/20230519195600.420644-1-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add the consistent prefix ESD_USB_ to all macros defined within
esd_usb.c.
For macros specific to esd CAN-USB/2 use ESD_USB_2_ as prefix.
For macros specific to esd CAN-USB/Micro use ESD_USB_M_ as prefix.
Change the macro ESD_USB_3_SAMPLES to ESD_USB_TRIPLE_SAMPLES to not
mix up with the prefix ESD_USB_3_ which will be introduced for the
CAN-USB/3 device.
Link: https://lore.kernel.org/all/CAMZ6RqLaDNy-fZ2G0+QMhUEckkXLL+ZyELVSDFmqpd++aBzZQg@mail.gmail.com/
Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr>
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: https://lore.kernel.org/r/20230519195600.420644-4-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Properly check for RX_DROP_UNUSABLE now that the new drop reason
infrastructure is used. Without this change, the comparison will always
be false as a more specific reason is given in the lower bits of result.
Fixes: baa951a1c1 ("mac80211: use the new drop reasons infrastructure")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230621120543.412920-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: expose more info and small improvements
Patch 1-3/9 track and expose some aggregated data counters at the MPTCP
level: the number of retransmissions and the bytes that have been
transferred. The first patch prepares the work by moving where snd_una
is updated for fallback sockets while the last patch adds some tests to
cover the new code.
Patch 4-6/9 introduce a new getsockopt for SOL_MPTCP: MPTCP_FULL_INFO.
This new socket option allows to combine info from MPTCP_INFO,
MPTCP_TCPINFO and MPTCP_SUBFLOW_ADDRS socket options into one. It can be
needed to have all info in one because the path-manager can close and
re-create subflows between getsockopt() and fooling the accounting. The
first patch introduces a unique subflow ID to easily detect when
subflows are being re-created with the same 5-tuple while the last patch
adds some tests to cover the new code.
Please note that patch 5/9 ("mptcp: introduce MPTCP_FULL_INFO getsockopt")
can reveal a bug that were there for a bit of time, see [1]. A fix has
recently been fixed to netdev for the -net tree: "mptcp: ensure listener
is unhashed before updating the sk status", see [2]. There is no
conflicts between the two patches but it might be better to apply this
series after the one for -net and after having merged "net" into
"net-next".
Patch 7/9 is similar to commit 47867f0a7e ("selftests: mptcp: join:
skip check if MIB counter not supported") recently applied in the -net
tree but here it adapts the new code that is only in net-next (and it
fixes a merge conflict resolution which didn't have any impact).
Patch 8 and 9/9 are two simple refactoring. One to consolidate the
transition to TCP_CLOSE in mptcp_do_fastclose() and avoid duplicated
code. The other one reduces the scope of an argument passed to
mptcp_pm_alloc_anno_list() function.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/407 [1]
Link: https://lore.kernel.org/netdev/20230620-upstream-net-20230620-misc-fixes-for-v6-4-v1-0-f36aa5eae8b9@tessares.net/ [2]
====================
Link: https://lore.kernel.org/r/20230620-upstream-net-next-20230620-mptcp-expose-more-info-and-misc-v1-0-62b9444bfd48@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass addr parameter to mptcp_pm_alloc_anno_list() instead of entry. We
can reduce the scope, e.g. in mptcp_pm_alloc_anno_list(), we only access
"entry->addr", we can then restrict to the pointer to "addr" then.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP code always set the msk state to TCP_CLOSE before
calling performing the fast-close. Move such state transition in
mptcp_do_fastclose() to avoid some code duplication.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP MIB counters introduced in commit fc518953bc
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.
If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added recently in the -net tree to
do the required checks and return an error if the counter is not
available.
This commit is similar to the one with the same title applied in the
-net tree but it modifies code only present in net-next for the moment,
see the Fixes commit below.
While at it, we can also remove the use of ${extra_msg} variable which
is never assigned in chk_rm_tx_nr() function and use 'echo' without '-n'
parameter.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 0639fa230a ("selftests: mptcp: add explicit check for new mibs")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>