In the s2idle stress test sdma resume fail occasionally,in the
failed case GPU is in the gfxoff state.This issue may introduce
by firmware miss handle doorbell S/R and now temporary fix the issue
by forcing exit gfxoff for sdma resume.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
On GFX9+, format modifiers are always enabled and ensure the
frame-buffers can be scanned out at ADDFB2 time.
On GFX8-, format modifiers are not supported and no other check
is performed. This means ADDFB2 IOCTLs will succeed even if the
tiling isn't supported for scan-out, and will result in garbage
displayed on screen [1].
Fix this by adding a check for tiling flags for GFX8 and older.
The check is taken from radeonsi in Mesa (see how is_displayable
is populated in gfx6_compute_surface).
Changes in v2: use drm_WARN_ONCE instead of drm_WARN (Michel)
[1]: https://github.com/swaywm/wlroots/issues/3185
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[why]
pci deviceid not passed to dal dc, without proper break,
dcn2.x falls into dcn3.x code path
[how]
pass in pci deviceid, and break once dal_version initialized.
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Stack variable params.backlight_ramping_override is uninitialized, so it
contains junk data
[How]
Initialize the variable to false
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
didn't read the value of mmCP_HQD_QUANTUM from correct
register offset
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
ASSR is dependent on Signed PSP Verstage to enable Content
Protection for eDP panels. Unsigned PSP verstage is used
during development phase causing ASSR to FAIL.
As a result, link training is performed with
DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for
eDP panels that causes display flicker on some panels.
[How]
- Do not change panel mode, if ASSR is disabled
- Just report and continue to perform eDP link training
with right settings further.
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
gmc_v{9,10}_0_gart_disable() isn't called matched with
correspoding gart_enbale function in SRIOV case. This will
lead to gart.bo pin_count leak on driver unload.
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A KMSAN warning is reported by Alexander Potapenko:
BUG: KMSAN: uninit-value in kernfs_dop_revalidate+0x61f/0x840
fs/kernfs/dir.c:1053
kernfs_dop_revalidate+0x61f/0x840 fs/kernfs/dir.c:1053
d_revalidate fs/namei.c:854
lookup_dcache fs/namei.c:1522
__lookup_hash+0x3a6/0x590 fs/namei.c:1543
filename_create+0x312/0x7c0 fs/namei.c:3657
do_mkdirat+0x103/0x930 fs/namei.c:3900
__do_sys_mkdir fs/namei.c:3931
__se_sys_mkdir fs/namei.c:3929
__x64_sys_mkdir+0xda/0x120 fs/namei.c:3929
do_syscall_x64 arch/x86/entry/common.c:51
It seems a positive dentry in kernfs becomes a negative dentry directly
through d_delete() in vfs_rmdir(). dentry->d_time is uninitialized
when accessing it in kernfs_dop_revalidate(), because it is only
initialized when created as negative dentry in kernfs_iop_lookup().
The problem can be reproduced by the following command:
cd /sys/fs/cgroup/pids && mkdir hi && stat hi && rmdir hi && stat hi
A simple fixes seems to be initializing d->d_time for positive dentry
in kernfs_iop_lookup() as well. The downside is the negative dentry
will be revalidated again after it becomes negative in d_delete(),
because the revison of its parent must have been increased due to
its removal.
Alternative solution is implement .d_iput for kernfs, and assign d_time
for the newly-generated negative dentry in it. But we may need to
take kernfs_rwsem to protect again the concurrent kernfs_link_sibling()
on the parent directory, it is a little over-killing. Now the simple
fix is chosen.
Link: https://marc.info/?l=linux-fsdevel&m=163249838610499
Fixes: c7e7c04274 ("kernfs: use VFS negative dentry caching")
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20210928140750.1274441-1-houtao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to clobber a register that is only being read from.
Oops. Drop the XMM register from the clobbers list.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210927223621.50178-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix an integer overflow when computing the Merkle tree layout of
extremely large files, exposed by btrfs adding support for fs-verity.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYVKxQBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK0q7AQCRVYl9e6gOPduntU6zNfYxYiJAmGRQ
9jekhtPwFnuhLgEAnFxW3B51bG5c+Yv3xBBbDRpflk+39gd39eUOqRtlPQ4=
=tPA9
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity fix from Eric Biggers:
"Fix an integer overflow when computing the Merkle tree layout of
extremely large files, exposed by btrfs adding support for fs-verity"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: fix signed integer overflow with i_size near S64_MAX
Fixes up some issues in rc1.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmFSRZgPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpSnYIAMNstllnJgyDR0GUGO850AKv0x2acncf66wc
J5vjWFWh5rtmdZSMhvA5mo3J8h/7s6Mn67fCwKt0Ii6fi1f6eIl4OBDYBfV8wXkN
+e8eQAUboi3HLqsiuFSNpJTHnD70xbU4inxiTjaBndXaxk20nkWJsd1Mvfmxh+mE
uMRnumAwrdL3c0n0Vrcq8j+zxLhlDXSFjICd6l+xRwPigsX/5gY+V5tPQg4lhnk+
VuC2Q0eJHmCEjrVi4Tx7dkoDu9U4Go5CnVF0MF9AzVf7JYBPJPks3r17unMe+ZAI
Nvwa/39no2APa9wZPQnGk5V9rOPtYFa6XXsCufN4BbtlqVX5AlQ=
=2oo6
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vdpa fixes from Michael Tsirkin:
"Fixes up some issues in rc1"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa: potential uninitialized return in vhost_vdpa_va_map()
vdpa/mlx5: Avoid executing set_vq_ready() if device is reset
vdpa/mlx5: Clear ready indication for control VQ
vduse: Cleanup the old kernel states after reset failure
vduse: missing error code in vduse_init()
virtio: don't fail on !of_device_is_compatible
- renesas_sdhi: Fix regression with hard reset on old SDHIs
- dw_mmc: Only inject fault before done/error
-----BEGIN PGP SIGNATURE-----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=WC87
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- renesas_sdhi: Fix regression with hard reset on old SDHIs
- dw_mmc: Only inject fault before done/error
* tag 'mmc-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: renesas_sdhi: fix regression with hard reset on old SDHIs
mmc: dw_mmc: Only inject fault before done/error
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-28
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).
The main changes are:
1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.
2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.
3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.
4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.
5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.
6) Fix return value handling for struct_ops BPF programs, from Hou Tao.
7) Various fixes to BPF selftests, from Jiri Benc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
,
This reverts commit 2d52c58b9c.
We have had several folks complain that this causes hangs for them, which
is especially problematic as the commit has also hit stable already.
As no resolution seems to be forthcoming right now, revert the patch.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214503
Fixes: 2d52c58b9c ("block, bfq: honor already-setup queue merges")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function copies strings around between multiple buffers
including a large on-stack array that causes a build warning
on 32-bit systems:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg':
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=]
The function can probably be cleaned up a lot, to go back to
printing directly into the output buffer, but dynamically allocating
the structure is a simpler workaround for now.
Fixes: 04d96139dd ("net: hns3: refine function hclge_dbg_dump_tm_pri()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the documentation the second resource is optional. But the
blamed commit ignores that and if the resource is not there it just
fails.
This patch reverts that to still allow the second resource to be
optional because other SoC have the some MDIO controller and doesn't
need to second resource.
Fixes: 672a1c3949 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
unix_create1() returns NULL on error, and the callers assume that it never
fails for reasons other than out of memory. So, the callers always return
-ENOMEM when unix_create1() fails.
However, it also returns NULL when the number of af_unix sockets exceeds
twice the limit controlled by sysctl: fs.file-max. In this case, the
callers should return -ENFILE like alloc_empty_file().
This patch changes unix_create1() to return the correct error value instead
of NULL on error.
Out of curiosity, the assumption has been wrong since 1999 due to this
change introduced in 2.2.4 [0].
diff -u --recursive --new-file v2.2.3/linux/net/unix/af_unix.c linux/net/unix/af_unix.c
--- v2.2.3/linux/net/unix/af_unix.c Tue Jan 19 11:32:53 1999
+++ linux/net/unix/af_unix.c Sun Mar 21 07:22:00 1999
@@ -388,6 +413,9 @@
{
struct sock *sk;
+ if (atomic_read(&unix_nr_socks) >= 2*max_files)
+ return NULL;
+
MOD_INC_USE_COUNT;
sk = sk_alloc(PF_UNIX, GFP_KERNEL, 1);
if (!sk) {
[0]: https://cdn.kernel.org/pub/linux/kernel/v2.2/patch-2.2.4.gz
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
up->corkflag field can be read or written without any lock.
Annotate accesses to avoid possible syzbot/KCSAN reports.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_INET is not set, there are failing references to IPv4
functions, so make this driver depend on INET.
Fixes these build errors:
sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common':
sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send'
sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common':
sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Aaron Young <aaron.young@oracle.com>
Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't print stats for which we haven't reserved space as it can
cause nasty memory bashing and related bad behaviors.
Fixes: aa620993b1 ("ionic: pull per-q stats work out of queue loops")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
nguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-09-27
This series contains updates to e100 driver only.
Jake corrects under allocation of register buffer due to incorrect
calculations and fixes buffer overrun of register dump.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Many architectures don't define virt_to_bus() any more, as drivers
should be using the dma-mapping interfaces where possible:
In file included from drivers/net/hamradio/dmascc.c:27:
drivers/net/hamradio/dmascc.c: In function 'tx_on':
drivers/net/hamradio/dmascc.c:976:30: error: implicit declaration of function 'virt_to_bus'; did you mean 'virt_to_fix'? [-Werror=implicit-function-declaration]
976 | virt_to_bus(priv->tx_buf[priv->tx_tail]) + n);
| ^~~~~~~~~~~
arch/arm/include/asm/dma.h:109:52: note: in definition of macro 'set_dma_addr'
109 | __set_dma_addr(chan, (void *)__bus_to_virt(addr))
| ^~~~
Add the Kconfig dependency to prevent this from being built on
architectures without virt_to_bus().
Fixes: bc1abb9e55 ("dmascc: use proper 'virt_to_bus()' rather than casting to 'int'")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
An object file cannot be built for both loadable module and built-in
use at the same time:
arm-linux-gnueabi-ld: drivers/net/ethernet/micrel/ks8851_common.o: in function `ks8851_probe_common':
ks8851_common.c:(.text+0xf80): undefined reference to `__this_module'
Change the ks8851_common code to be a standalone module instead,
and use Makefile logic to ensure this is built-in if at least one
of its two users is.
Fixes: 797047f875 ("net: ks8851: Implement Parallel bus operations")
Link: https://lore.kernel.org/netdev/20210125121937.3900988-1-arnd@kernel.org/
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the case where the dst register maps to %rax as otherwise this produces
an incorrect mapping with the implementation in 981f94c3e9 ("bpf: Add
bitwise atomic instructions") as %rax is clobbered given it's part of the
cmpxchg as operand.
The issue is similar to b29dd96b90 ("bpf, x86: Fix BPF_FETCH atomic and/or/
xor with r0 as src") just that the case of dst register was missed.
Before, dst=r0 (%rax) src=r2 (%rsi):
[...]
c5: mov %rax,%r10
c8: mov 0x0(%rax),%rax <---+ (broken)
cc: mov %rax,%r11 |
cf: and %rsi,%r11 |
d2: lock cmpxchg %r11,0x0(%rax) <---+
d8: jne 0x00000000000000c8 |
da: mov %rax,%rsi |
dd: mov %r10,%rax |
[...] |
|
After, dst=r0 (%rax) src=r2 (%rsi): |
|
[...] |
da: mov %rax,%r10 |
dd: mov 0x0(%r10),%rax <---+ (fixed)
e1: mov %rax,%r11 |
e4: and %rsi,%r11 |
e7: lock cmpxchg %r11,0x0(%r10) <---+
ed: jne 0x00000000000000dd
ef: mov %rax,%rsi
f2: mov %r10,%rax
[...]
The remaining combinations were fine as-is though:
After, dst=r9 (%r15) src=r0 (%rax):
[...]
dc: mov %rax,%r10
df: mov 0x0(%r15),%rax
e3: mov %rax,%r11
e6: and %r10,%r11
e9: lock cmpxchg %r11,0x0(%r15)
ef: jne 0x00000000000000df _
f1: mov %rax,%r10 | (unneeded, but
f4: mov %r10,%rax _| not a problem)
[...]
After, dst=r9 (%r15) src=r4 (%rcx):
[...]
de: mov %rax,%r10
e1: mov 0x0(%r15),%rax
e5: mov %rax,%r11
e8: and %rcx,%r11
eb: lock cmpxchg %r11,0x0(%r15)
f1: jne 0x00000000000000e1
f3: mov %rax,%rcx
f6: mov %r10,%rax
[...]
The case of dst == src register is rejected by the verifier and
therefore not supported, but x86 JIT also handles this case just
fine.
After, dst=r0 (%rax) src=r0 (%rax):
[...]
eb: mov %rax,%r10
ee: mov 0x0(%r10),%rax
f2: mov %rax,%r11
f5: and %r10,%r11
f8: lock cmpxchg %r11,0x0(%r10)
fe: jne 0x00000000000000ee
100: mov %rax,%r10
103: mov %r10,%rax
[...]
Fixes: 981f94c3e9 ("bpf: Add bitwise atomic instructions")
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
sid2groups keeps track of which stream id combinations belong to a
iommu_group to assign those correctly to devices.
When a iommu_group is freed a stale pointer will however remain in
sid2groups. This prevents devices with the same stream id combination
to ever be attached again (see below).
Fix that by creating a shadow copy of the stream id configuration
when a group is allocated for the first time and clear the sid2group
entry when that group is freed.
# echo 1 >/sys/bus/pci/devices/0000\:03\:00.0/remove
pci 0000:03:00.0: Removing from iommu group 1
# echo 1 >/sys/bus/pci/rescan
[...]
pci 0000:03:00.0: BAR 0: assigned [mem 0x6a0000000-0x6a000ffff 64bit pref]
pci 0000:03:00.0: BAR 2: assigned [mem 0x6a0010000-0x6a001ffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0x6c0100000-0x6c01007ff pref]
tg3 0000:03:00.0: Failed to add to iommu group 1: -2
[...]
Fixes: 46d1fb072e ("iommu/dart: Add DART iommu driver")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210924134502.15589-1-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
719a193356 ("iommu/vt-d: Tweak the description of a DMA fault") changed
the DMA fault reason from hex to decimal. It also added "0x" prefixes to
the PCI bus/device, e.g.,
- DMAR: [INTR-REMAP] Request device [00:00.5]
+ DMAR: [INTR-REMAP] Request device [0x00:0x00.5]
These no longer match dev_printk() and other similar messages in
dmar_match_pci_path() and dmar_acpi_insert_dev_scope().
Drop the "0x" prefixes from the bus and device addresses.
Fixes: 719a193356 ("iommu/vt-d: Tweak the description of a DMA fault")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20210903193711.483999-1-helgaas@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210922054726.499110-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
apple_dart_tlb_flush_{all,walk} expect to get a struct apple_dart_domain
but instead get a struct iommu_domain right now. This breaks those two
functions and can lead to kernel panics like the one below.
DART can only invalidate the entire TLB and apple_dart_iotlb_sync will
already flush everything. There's no need to do that again inside those
two functions. Let's just drop them.
pci 0000:03:00.0: Removing from iommu group 1
Unable to handle kernel paging request at virtual address 0000000100000023
[...]
Call trace:
_raw_spin_lock_irqsave+0x54/0xbc
apple_dart_hw_stream_command.constprop.0+0x2c/0x130
apple_dart_tlb_flush_all+0x48/0x90
free_io_pgtable_ops+0x40/0x70
apple_dart_domain_free+0x2c/0x44
iommu_group_release+0x68/0xac
kobject_cleanup+0x4c/0x1fc
kobject_cleanup+0x14c/0x1fc
kobject_put+0x64/0x84
iommu_group_remove_device+0x110/0x180
iommu_release_device+0x50/0xa0
[...]
Fixes: 46d1fb072e ("iommu/dart: Add DART iommu driver")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210921153934.35647-1-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The hrtimer callback pcsp_do_timer() prepares rearming of the timer with
hrtimer_forward(). hrtimer_forward() is intended to provide a mechanism to
forward the expiry time of the hrtimer by a multiple of the period argument
so that the expiry time greater than the time provided in the 'now'
argument.
pcsp_do_timer() invokes hrtimer_forward() with the current timer expiry
time as 'now' argument. That's providing a periodic timer expiry, but is
not really robust when the timer callback is delayed so that the resulting
new expiry time is already in the past which causes the callback to be
invoked immediately again. If the timer is delayed then the back to back
invocation is not really making it better than skipping the missed
periods. Sound is distorted in any case.
Use hrtimer_forward_now() which ensures that the next expiry is in the
future. This prevents hogging the CPU in the timer expiry code and allows
later on to remove hrtimer_forward() from the public interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210923153339.623208460@linutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The same code is repeated in multiple locations. Create a helper
function for it.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210915172808.620546-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the driver core defers the probe of a device, set the deferred
probe reason so that it's easier to debug. The deferred probe reason is
available in debugfs under devices_deferred.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210915172808.620546-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override
a greater rp_filter value on the individual interfaces. We also need to set
net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way,
they'll also get their own rp_filter value of zero.
Fixes: 0fde56e438 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/b1cdd9d469f09ea6e01e9c89a6071c79b7380f89.1632386362.git.jbenc@redhat.com
When building bpf selftest with make -j, I'm randomly getting build failures
such as this one:
In file included from progs/bpf_flow.c:19:
[...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
#include "bpf_helper_defs.h"
^~~~~~~~~~~~~~~~~~~
The file that fails the build varies between runs but it's always in the
progs/ subdir.
The reason is a missing make dependency on libbpf for the .o files in
progs/. There was a dependency before commit 3ac2e20fba but that commit
removed it to prevent unneeded rebuilds. However, that only works if libbpf
has been built already; the 'wildcard' prerequisite does not trigger when
there's no bpf_helper_defs.h generated yet.
Keep the libbpf as an order-only prerequisite to satisfy both goals. It is
always built before the progs/ objects but it does not trigger unnecessary
rebuilds by itself.
Fixes: 3ac2e20fba ("selftests/bpf: BPF object files should depend only on libbpf headers")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com
If cgroup_sk_alloc() is called from interrupt context, then just assign the
root cgroup to skcd->cgroup. Prior to commit 8520e224f5 ("bpf, cgroups:
Fix cgroup v2 fallback on v1/v2 mixed mode") we would just return, and later
on in sock_cgroup_ptr(), we were NULL-testing the cgroup in fast-path, and
iff indeed NULL returning the root cgroup (v ?: &cgrp_dfl_root.cgrp). Rather
than re-adding the NULL-test to the fast-path we can just assign it once from
cgroup_sk_alloc() given v1/v2 handling has been simplified. The migration from
NULL test with returning &cgrp_dfl_root.cgrp to assigning &cgrp_dfl_root.cgrp
directly does /not/ change behavior for callers of sock_cgroup_ptr().
syzkaller was able to trigger a splat in the legacy netrom code base, where
the RX handler in nr_rx_frame() calls nr_make_new() which calls sk_alloc()
and therefore cgroup_sk_alloc() with in_interrupt() condition. Thus the NULL
skcd->cgroup, where it trips over on cgroup_sk_free() side given it expects
a non-NULL object. There are a few other candidates aside from netrom which
have similar pattern where in their accept-like implementation, they just call
to sk_alloc() and thus cgroup_sk_alloc() instead of sk_clone_lock() with the
corresponding cgroup_sk_clone() which then inherits the cgroup from the parent
socket. None of them are related to core protocols where BPF cgroup programs
are running from. However, in future, they should follow to implement a similar
inheritance mechanism.
Additionally, with a !CONFIG_CGROUP_NET_PRIO and !CONFIG_CGROUP_NET_CLASSID
configuration, the same issue was exposed also prior to 8520e224f5 due to
commit e876ecc67d ("cgroup: memcg: net: do not associate sock with unrelated
cgroup") which added the early in_interrupt() return back then.
Fixes: 8520e224f5 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode")
Fixes: e876ecc67d ("cgroup: memcg: net: do not associate sock with unrelated cgroup")
Reported-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com
Reported-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com
Tested-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/bpf/20210927123921.21535-1-daniel@iogearbox.net
When a BPF object is compiled without BTF info (without -g),
trying to link such objects using bpftool causes a SIGSEGV due to
btf__get_nr_types accessing obj->btf which is NULL. Fix this by
checking for the NULL pointer, and return error.
Reproducer:
$ cat a.bpf.c
extern int foo(void);
int bar(void) { return foo(); }
$ cat b.bpf.c
int foo(void) { return 0; }
$ clang -O2 -target bpf -c a.bpf.c
$ clang -O2 -target bpf -c b.bpf.c
$ bpftool gen obj out a.bpf.o b.bpf.o
Segmentation fault (core dumped)
After fix:
$ bpftool gen obj out a.bpf.o b.bpf.o
libbpf: failed to find BTF info for object 'a.bpf.o'
Error: failed to link 'a.bpf.o': Unknown error -22 (-22)
Fixes: a46349227c (libbpf: Add linker extern resolution support for functions and global variables)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210924023725.70228-1-memxor@gmail.com
BPF folks maintain these and they're not picked up by the current
MAINTAINERS entries.
Files caught by the added globs:
include/linux/btf.h
include/linux/btf_ids.h
include/uapi/linux/btf.h
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210924193557.3081469-1-davemarchevsky@fb.com
When introducing CAP_BPF, bpf_jit_charge_modmem() was not changed to treat
programs with CAP_BPF as privileged for the purpose of JIT memory allocation.
This means that a program without CAP_BPF can block a program with CAP_BPF
from loading a program.
Fix this by checking bpf_capable() in bpf_jit_charge_modmem().
Fixes: 2c78ee898d ("bpf: Implement CAP_BPF")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922111153.19843-1-lmb@cloudflare.com
This contains a fix for an UAPI error that happens when no IOMMU is
enabled, as well as a few build warning fixes and plugs a potential
memory leak.
-----BEGIN PGP SIGNATURE-----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=FObG
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.15-rc3' of ssh://git.freedesktop.org/git/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.15-rc3
This contains a fix for an UAPI error that happens when no IOMMU is
enabled, as well as a few build warning fixes and plugs a potential
memory leak.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924143537.1341882-1-thierry.reding@gmail.com
commit 23e91d8b7c5a("cifs: rename cifs_common to smbfs_common") cause
the following warning from get_maintainer.pl.
./scripts/get_maintainer.pl --self-test=patterns complains:
warning: no file matches F: fs/cifs_common/
This patch rename cifs_common to smbfs_common in cifs and ksmbd entry.
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Fix 'perf test' DWARF unwind for optimized builds.
- Fix 'perf test' 'Object code reading' when dealing with samples in @plt
symbols.
- Fix off-by-one directory paths in the ARM support code.
- Fix error message to eliminate confusion in 'perf config' when first creating
a config file.
- 'perf iostat' fix for system wide operation.
- Fix printing of metrics when 'perf iostat' is used with one or more
iio_root_ports and unconnected cpus (using -C).
- Fix several typos in the documentation files.
- Fix spelling mistake "icach" -> "icache" in the power8 JSON vendor files.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYVIO3wAKCRCyPKLppCJ+
J9piAP4jmxYEnimD6qvVHjOLio2LvwGI0u7MakZCHWVKQZKHbgEArb8l3+D2+YXw
U7RxDmXoSE+0EjTV8o13sQlerRTU3wM=
=oVI7
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.15-2021-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'perf test' DWARF unwind for optimized builds.
- Fix 'perf test' 'Object code reading' when dealing with samples in
@plt symbols.
- Fix off-by-one directory paths in the ARM support code.
- Fix error message to eliminate confusion in 'perf config' when first
creating a config file.
- 'perf iostat' fix for system wide operation.
- Fix printing of metrics when 'perf iostat' is used with one or more
iio_root_ports and unconnected cpus (using -C).
- Fix several typos in the documentation files.
- Fix spelling mistake "icach" -> "icache" in the power8 JSON vendor
files.
* tag 'perf-tools-fixes-for-v5.15-2021-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf iostat: Fix Segmentation fault from NULL 'struct perf_counts_values *'
perf iostat: Use system-wide mode if the target cpu_list is unspecified
perf config: Refine error message to eliminate confusion
perf doc: Fix typos all over the place
perf arm: Fix off-by-one directory paths.
perf vendor events powerpc: Fix spelling mistake "icach" -> "icache"
perf tests: Fix flaky test 'Object code reading'
perf test: Fix DWARF unwind for optimized builds.
- missing TLB flush
- nested virtualization fixes for SMM (secure boot on nested hypervisor)
and other nested SVM fixes
- syscall fuzzing fixes
- live migration fix for AMD SEV
- mirror VMs now work for SEV-ES too
- fixes for reset
- possible out-of-bounds access in IOAPIC emulation
- fix enlightened VMCS on Windows 2022
ARM:
- Add missing FORCE target when building the EL2 object
- Fix a PMU probe regression on some platforms
Generic:
- KCSAN fixes
selftests:
- random fixes, mostly for clang compilation
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmFN0EwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNqaQf/Vx7ePFTqwWpo+8wKapnc6JN9SLjC
hM4jipxfc1WyQWcfCt8ZuPhCnhF7o8mG/mrqTm+JB+oGqIsydHW19DiUT8ekv09F
dQ+XYSiR4B547wUH5XLQc4xG9imwYlXGEOHqrE7eJvGH3LOqVFX2fLRBnFefZbO8
GKhRJrGXwG3/JSAP6A0c22iVU+pLbfV9gpKwrAj0V7o8nzT2b3Wmh74WBNb47BzE
a4+AwKpWO4rqJGOwdYwy67pdFHh1YmrlZ59cFZc7fzlXE+o0D0bitaJyioZALpOl
4mRGdzoYkNB++ZjDzVFnAClCYQV/oNxCNGFaFF2mh/gzXG1TLmN7B8zGDg==
=7oVh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A bit late... I got sidetracked by back-from-vacation routines and
conferences. But most of these patches are already a few weeks old and
things look more calm on the mailing list than what this pull request
would suggest.
x86:
- missing TLB flush
- nested virtualization fixes for SMM (secure boot on nested
hypervisor) and other nested SVM fixes
- syscall fuzzing fixes
- live migration fix for AMD SEV
- mirror VMs now work for SEV-ES too
- fixes for reset
- possible out-of-bounds access in IOAPIC emulation
- fix enlightened VMCS on Windows 2022
ARM:
- Add missing FORCE target when building the EL2 object
- Fix a PMU probe regression on some platforms
Generic:
- KCSAN fixes
selftests:
- random fixes, mostly for clang compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
selftests: KVM: Explicitly use movq to read xmm registers
selftests: KVM: Call ucall_init when setting up in rseq_test
KVM: Remove tlbs_dirty
KVM: X86: Synchronize the shadow pagetable before link it
KVM: X86: Fix missed remote tlb flush in rmap_write_protect()
KVM: x86: nSVM: don't copy virt_ext from vmcb12
KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround
KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0
KVM: x86: nSVM: restore int_vector in svm_clear_vintr
kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[]
KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit
KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry
KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state
KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm
KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode
KVM: x86: reset pdptrs_from_userspace when exiting smm
KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit
KVM: nVMX: Filter out all unsupported controls when eVMCS was activated
KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs
KVM: Clean up benign vcpu->cpu data races when kicking vCPUs
...
Compiling sb_watchdog needs to clearly define SIBYTE_HDR_FEATURES.
In arch/mips/sibyte/Platform like:
cflags-$(CONFIG_SIBYTE_BCM112X) += \
-I$(srctree)/arch/mips/include/asm/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
Otherwise, SIBYTE_HDR_FEATURES is SIBYTE_HDR_FMASK_ALL.
SIBYTE_HDR_FMASK_ALL is mean:
#define SIBYTE_HDR_FMASK_ALL SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \
| SIBYTE_HDR_FMASK_1480_ALL)
So, If not limited to CPU_SB1, we will get such an error:
arch/mips/include/asm/sibyte/bcm1480_scd.h:261: error: "M_SPC_CFG_CLEAR" redefined [-Werror]
arch/mips/include/asm/sibyte/bcm1480_scd.h:262: error: "M_SPC_CFG_ENABLE" redefined [-Werror]
Fixes: da2a68b3eb ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent block layer refactoring broke the way how the pmem driver
abused device_add_disk. Fix this by properly passing the attribute groups
to device_add_disk.
Fixes: 52b85909f8 ("block: fold register_disk into device_add_disk")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210922173431.2454024-2-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When ACPI NFIT table is failing to populate correct numa information
on arm64, dax_kmem will get NUMA_NO_NODE from the NFIT driver.
Without this patch, pmem can't be probed as RAM devices on arm64 guest:
$ndctl create-namespace -fe namespace0.0 --mode=devdax --map=dev -s 1g -a 128M
kmem dax0.0: rejecting DAX region [mem 0x240400000-0x2bfffffff] with invalid node: -1
kmem: probe of dax0.0 failed with error -22
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jia He <justin.he@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: c221c0b030 ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Link: https://lore.kernel.org/r/20210922152919.6940-1-justin.he@arm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit 9d682ea6bc ("vboxsf: Fix the check for the old binary
mount-arguments struct") was meant to fix a build error due to sign
mismatch in 'char' and the use of character constants, but it just moved
the error elsewhere, in that on some architectures characters and signed
and on others they are unsigned, and that's just how the C standard
works.
The proper fix is a simple "don't do that then". The code was just
being silly and odd, and it should never have cared about signed vs
unsigned characters in the first place, since what it is testing is not
four "characters", but four bytes.
And the way to compare four bytes is by using "memcmp()".
Which compilers will know to just turn into a single 32-bit compare with
a constant, as long as you don't have crazy debug options enabled.
Link: https://lore.kernel.org/lkml/20210927094123.576521-1-arnd@kernel.org/
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the CQE size of the user space is not the size supported by the
hardware, the creation of CQ should be stopped.
Fixes: 09a5f210f6 ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-3-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The size of CQE is different for different versions of hardware, so the
driver needs to specify the size of CQE explicitly.
Fixes: 09a5f210f6 ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-2-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Linus Torvalds