Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to armada_fbdev_setup() after armada has registered its
DRM device. As in most drivers, aramda's fbdev emulation now acts
like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within armada. If the fbdev framebuffer
has been fully set up, struct fb_ops.fb_destroy implements the
release. For partially initialized emulation, the fbdev client
reverts the initial setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-5-tzimmermann@suse.de
Initialize the fbdev client in the fbdev code with empty helper
functions. Also clean up the client. The helpers will later
implement various functionality of the DRM client. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-4-tzimmermann@suse.de
Only build armada's fbdev emulation if CONFIG_DRM_FBDEV_EMULATION
has been enabled. No functional changes, but allows to build armada
without fbdev.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-3-tzimmermann@suse.de
This bridge doesn't actually implement HPD due to it being way too slow
but instead expects the panel driver to wait enough to assume HPD is
asserted. However some panels (such as the generic 'edp-panel') expect
the bridge to deal with the delay and pass maximum delay to the aux
instead.
In order to support such panels, add a dummy implementation of wait
that would just sleep the maximum delay and assume no failure has
happened.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230408082014.235425-1-nikita@trvn.ru
Include <asm-generic/fb.h> and set the required preprocessor tokens
correctly. x86 now implements its own set of fb helpers, but still
follows the overall pattern of the other <asm/fb.h> files.
v3:
* clarified commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-20-tzimmermann@suse.de
Replace sparc64's fb_pgprotect() with the generic one
from <asm-generic/fb.h>. On sparc, pgprot_writecombine() and
pgprot_noncached() are the same; hence no functional changes
v3:
* use default implementation for fb_pgprotect() on
sparc64 (Arnd)
v2:
* restore the original fb_pgprotect()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-19-tzimmermann@suse.de
Other architectures implment fb_is_primary_device() in a source
file. Do the same on sparc. No functional changes, but allows to
remove several include statement from <asm/fb.h>.
v2:
* don't include <asm/prom.h> in header file
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-18-tzimmermann@suse.de
Replace the architecture's fbdev helpers with the generic
ones from <asm-generic/fb.h>. No functional changes.
v2:
* use default implementation for fb_pgprotect() (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-17-tzimmermann@suse.de
Replace the architecture's fb_is_primary_device() with the generic
one from <asm-generic/fb.h>. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-16-tzimmermann@suse.de
Replace the architecture's fbdev helpers with the generic ones
from <asm-generic/fb.h>. On PARISC, pgprot_writecombine() and
pgprot_noncached() are the same; hence no functional changes.
v3:
* use default implementation for fb_pgprotect() (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-15-tzimmermann@suse.de
Move PARISC's implementation of fb_is_primary_device() into the
architecture directory. This the place of the declaration and
where other architectures implement this function. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-14-tzimmermann@suse.de
STI core files have been located in console and fbdev code. Move
the source code and header to the directories for video helpers.
Also update the config and build rules such that the code depends
on the config symbol CONFIG_STI_CORE, which STI console and STI
framebuffer select automatically.
Cleans up the console makefile and prepares PARISC to implement
fb_is_primary_device() within the arch/ directory. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-12-tzimmermann@suse.de
Replace the architecture's fb_is_primary_device() with the generic
one from <asm-generic/fb.h>. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-10-tzimmermann@suse.de
Replace the architecture's fb_is_primary_device() with the generic
one from <asm-generic/fb.h>. No functional changes.
v2:
* provide empty fb_pgprotect() on non-MMU systems
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-9-tzimmermann@suse.de
Merge all variants of fb_pgprotect() into a single function body.
There are two different cases for MMU systems. For non-MMU systems,
the function body will be empty. No functional changes, but this
will help with the switch to <asm-generic/fb.h>.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-8-tzimmermann@suse.de
Replace the architecture's fbdev helpers with the generic
ones from <asm-generic/fb.h>. No functional changes.
v2:
* use default implementation for fb_pgprotect() (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-7-tzimmermann@suse.de
Replace the architecture's fbdev helpers with the generic
ones from <asm-generic/fb.h>. No functional changes.
v2:
* use default implementation for fb_pgprotect() (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-5-tzimmermann@suse.de
Replace the architecture's fbdev helpers with the generic
ones from <asm-generic/fb.h>. No functional changes.
v2:
* use default implementation for fb_pgprotect() (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-4-tzimmermann@suse.de
Replace the architecture's fbdev helpers with the generic ones from
<asm-generic/fb.h>. On arc, pgprot_writecombine() and pgprot_noncached()
are the same; hence no functional changes.
v3:
* use default implementation for fb_pgprotect() (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Vineet Gupta <vgupta@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-3-tzimmermann@suse.de
Generic implementations of fb_pgprotect() and fb_is_primary_device()
have been in the source code for a long time. Prepare the header file
to make use of them.
Improve the code by using an inline function for fb_pgprotect()
and by removing include statements. The default mode set by
fb_pgprotect() is now writecombine, which is what most platforms
want.
Symbols are protected by preprocessor guards. Architectures that
provide a symbol need to define a preprocessor token of the same
name and value. Otherwise the header file will provide a generic
implementation. This pattern has been taken from <asm/io.h>.
v3:
* include the correct header files
v2:
* use writecombine mappings by default (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-2-tzimmermann@suse.de
Currently, drm_gem_fb_create() doesn't check if the pixel format is
supported, which can lead to the acceptance of invalid pixel formats
e.g. the acceptance of invalid modifiers. Therefore, add a check for
valid formats on drm_gem_fb_create().
Note that this check is only valid for atomic drivers, because, for
non-atomic drivers, checking drm_any_plane_has_format() is not
possible since the format list for the primary plane is fake, and we'd
therefore reject valid formats.
Adding this check to drm_gem_fb_create() will guarantee that the
igt@kms_addfb_basic@addfb25-bad-modifier IGT test passes for drivers
using this callback.
This commit is a recapture of a series sent a while ago. Initially,
I sent a patch [1] similar to this one in which I introduced the
format check to drm_gem_fb_create().
Based on the feedback on the patch, I placed the check inside
framebuffer_check() [2] so that it wouldn't be needed to hit any
driver-specific code path when the check fails. Therefore, we could
remove the check from the specific drivers (i915, amdgpu, and vmwgfx).
But, with some new feedback, it was shown that introducing this check
inside framebuffer_check() is problematic for the i915 driver [3].
For the i915 driver, in the legacy case, in which we don't get the
modifier from the userspace, i915's fb_create hook computes the right
modifier, which isn't necessarily linear. Therefore, if we check the
modifier before that point, we might get wrong answers.
So, I kept the check inside the i915 driver and removed the check from
amdgpu and vmwgfx [4]. But, this yet hasn't solved the i915 problem [5].
As we cannot add the check inside framebuffer_check() without
affecting the i915 behavior, this commit went back to the original
patch. This way we can guarantee a more uniform behavior from the
drivers that use the drm_gem_fb_create() callback.
[1] https://lore.kernel.org/dri-devel/20230103125322.855089-1-mcanal@igalia.com/T/
[2] https://lore.kernel.org/dri-devel/20230109105807.18172-1-mcanal@igalia.com/T/
[3] https://lore.kernel.org/dri-devel/Y8AAdW2y7zN7DCUZ@intel.com/
[4] https://lore.kernel.org/dri-devel/20230113112743.188486-1-mcanal@igalia.com/T/
[5] https://lore.kernel.org/dri-devel/Y8FXWvEhO7GCRKVJ@intel.com/
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412142923.136707-1-mcanal@igalia.com
It already happend a few times that patches slipped through which
implemented access to an entity through a job that was already removed
from the entities queue. Since jobs and entities might have different
lifecycles, this can potentially cause UAF bugs.
In order to make it obvious that a jobs entity pointer shouldn't be
accessed after drm_sched_entity_pop_job() was called successfully, set
the jobs entity pointer to NULL once the job is removed from the entity
queue.
Moreover, debugging a potential NULL pointer dereference is way easier
than potentially corrupted memory through a UAF.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://lore.kernel.org/r/20230418100453.4433-1-dakr@redhat.com
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the functions “nvkm_fanpwm_create” and “nvkm_fantog_create”.
Thus avoid the risk for undefined behaviour by moving the assignment
for the data structure member “fan” behind two null pointer checks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d0215dc-74d4-2c42-2eee-7a5fcf62b9f1@web.de
The variable “pbus” was read only once in the implementation of
the function “nvkm_pcie_set_link”.
Thus move the usage of an expression into a parameter for a function call.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/04e2c1f5-26c7-9a23-5861-3d8757556cdd@web.de
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nvkm_pcie_set_link”.
Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “subdev” behind some condition checks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b31019b1-bb73-ed93-3378-e551e17a4f32@web.de
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nvkm_pstate_new”.
Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “cstate” behind the null pointer check.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6435d829-2c9b-a3f7-c8cd-cf923508a092@web.de
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nvbios_power_budget_header”.
Thus avoid the risk for undefined behaviour by moving the usage
of an expression into a parameter for a macro call in one if branch.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/529fe82e-59f0-71a2-1e33-b051f833b67c@web.de
Five strings which did not contain a data format specification should
be put into a sequence. Thus use the corresponding function “seq_puts”.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bdee7e41-094a-91d1-3f6f-56df402d70b7@web.de
A single character (line break) should be put into a sequence.
Thus use the corresponding function “seq_putc”.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e6f9b34e-58d9-b1aa-8b12-8d4a55153d1d@web.de
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nouveau_debugfs_pstate_get”.
Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “ctrl” behind the null pointer check.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5b7b99f7-1692-74e5-4b1e-cfa14dad7c57@web.de
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nouveau_debugfs_pstate_set”.
Thus avoid the risk for undefined behaviour by moving the usage
of an expression into a parameter for a function call at the end.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1903e057-57d3-e12e-da37-008e23afd2e2@web.de
Some Lenovo J606F tablets come with a 2K (2000x1200) 60Hz 11" 5:3
video mode display. Add support for these panels.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412-topic-lenovopanel-v3-4-bcf9ba4de46f@linaro.org
Some bright vendors mount their display panels upside down. Add the
required pieces to allow for accounting for that.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412-topic-lenovopanel-v3-3-bcf9ba4de46f@linaro.org
This chip supports controlling the backlight via DCS commands, on at
least some panels. Add support for doing so.
Note this may only concern the NT36523*W* variant. Nobody knows, really,
there's no docs.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412-topic-lenovopanel-v3-2-bcf9ba4de46f@linaro.org
Some Lenovo J606F tablets come with a 2K (2000x1200) 60Hz 11" 5:3
video mode display. Document it and allow rotation while at it (Lenovo
mounted it upside down!).
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412-topic-lenovopanel-v3-1-bcf9ba4de46f@linaro.org
Backmerging drm-next to sync with msm tree. Resolves a conflict
between aperture-helper changes and msm's use of those interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
The hardware for gma500 is different from the rest, as it uses stolen
framebuffer memory that is not available via PCI BAR. The regular PCI
removal helper cannot detect the framebuffer, while the non-PCI helper
misses possible conflicting VGA devices (i.e., a framebuffer or text
console).
Gma500 therefore calls both helpers to catch all cases. It's confusing
as it implies that there's something about the PCI device that requires
ownership management. The relationship between the PCI device and the
VGA devices is non-obvious. At worst, readers might assume that calling
two functions for clearing aperture ownership is a bug in the driver.
Hence, move the PCI removal helper's code for VGA functionality into
a separate function and call this function from gma500. Documents the
purpose of each call to aperture helpers. The change contains comments
and example code form the discussion at [1].
v5:
* fix grammar in gma500 comment (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230404201842.567344-1-daniel.vetter@ffwll.ch/ # 1
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-10-tzimmermann@suse.de
vga_default_device really is supposed to cover all corners, at least
for x86. Additionally checking for rom shadowing should be redundant,
because the bios/fw only does that for the boot vga device.
If this turns out to be wrong, then most likely that's a special case
which should be added to the vgaarb code, not replicated all over.
Patch motived by changes to the aperture helpers, which also have this
open code in a bunch of places, and which are all removed in a
clean-up series. This function here is just for selecting the default
fbdev device for fbcon, but I figured for consistency it might be good
to throw this patch in on top.
Note that the shadow rom check predates vgaarb, which was only wired
up in commit 88674088d1 ("x86: Use vga_default_device() when
determining whether an fb is primary"). That patch doesn't explain why
we still fall back to the shadow rom check.
v4:
- fix commit message style (i.e., commit 1234 ("..."))
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-9-tzimmermann@suse.de
Instead of calling aperture_remove_conflicting_devices() to remove the
conflicting devices, just call to aperture_detach_devices() to detach
the device that matches the same PCI BAR / aperture range. Since the
former is just a wrapper of the latter plus a sysfb_disable() call,
and now that's done in this function but only for the primary devices.
This fixes a regression introduced by commit ee7a69aa38 ("fbdev:
Disable sysfb device registration when removing conflicting FBs"),
where we remove the sysfb when loading a driver for an unrelated pci
device, resulting in the user losing their efifb console or similar.
Note that in practice this only is a problem with the nvidia blob,
because that's the only gpu driver people might install which does not
come with an fbdev driver of it's own. For everyone else the real gpu
driver will restore a working console.
Also note that in the referenced bug there's confusion that this same
bug also happens on amdgpu. But that was just another amdgpu specific
regression, which just happened to happen at roughly the same time and
with the same user-observable symptoms. That bug is fixed now, see
https://bugzilla.kernel.org/show_bug.cgi?id=216331#c15
Note that we should not have any such issues on non-pci multi-gpu
issues, because I could only find two such cases:
- SoC with some external panel over spi or similar. These panel
drivers do not use drm_aperture_remove_conflicting_framebuffers(),
so no problem.
- vga+mga, which is a direct console driver and entirely bypasses all
this.
For the above reasons the cc: stable is just notionally, this patch
will need a backport and that's up to nvidia if they care enough.
v2:
- Explain a bit better why other multi-gpu that aren't pci shouldn't
have any issues with making all this fully pci specific.
v3
- polish commit message (Javier)
v4:
- Fix commit message style (i.e., commit 1234 ("..."))
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Fixes: ee7a69aa38 ("fbdev: Disable sysfb device registration when removing conflicting FBs")
Tested-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216303#c28
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Aaron Plattner <aplattner@nvidia.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # v5.19+ (if someone else does the backport)
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-8-tzimmermann@suse.de
With the preceding patches it's become defunct. Also I'm about to add
a different boolean argument, so it's better to keep the confusion
down to the absolute minimum.
v2: Since the hypervfb patch got droppped (it's only a pci device for
gen1 vm, not for gen2) there is one leftover user in an actual driver
left to touch.
v4:
- fixes to commit message
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: linux-hyperv@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-7-tzimmermann@suse.de
A few reasons for this:
- It's really the only one where this matters. I tried looking around,
and I didn't find any non-pci vga-compatible controllers for x86
(since that's the only platform where we had this until a few
patches ago), where a driver participating in the aperture claim
dance would interfere.
- I also don't expect that any future bus anytime soon will
not just look like pci towards the OS, that's been the case for like
25+ years by now for practically everything (even non non-x86).
- Also it's a bit funny if we have one part of the vga removal in the
pci function, and the other in the generic one.
v2: Rebase.
v4:
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-6-tzimmermann@suse.de
Otherwise it's a bit silly, and we might throw out the driver for the
screen the user is actually looking at. I haven't found a bug report
for this case yet, but we did get bug reports for the analog case
where we're throwing out the efifb driver.
v2: Flip the check around to make it clear it's a special case for
kicking out the vgacon driver only (Thomas)
v4:
- fixes to commit message
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216303
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-5-tzimmermann@suse.de
Only really pci devices have a business setting this - it's for
figuring out whether the legacy vga stuff should be nuked too. And
with the preceding two patches those are all using the pci version of
this.
Which means for all other callers primary == false and we can remove
it now.
v2:
- Reorder to avoid compile fail (Thomas)
- Include gma500, which retained it's called to the non-pci version.
v4:
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Deepak Rawat <drawat.floss@gmail.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Helge Deller <deller@gmx.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-hyperv@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-4-tzimmermann@suse.de
Since vgaarb has been promoted to be a core piece of the pci subsystem
we don't have to open code random guesses anymore, we actually know
this in a platform agnostic way, and there's no need for an x86
specific hack. See also commit 1d38fe6ee6 ("PCI/VGA: Move vgaarb to
drivers/pci")
This should not result in any functional change, and the non-x86
multi-gpu pci systems are probably rare enough to not matter (I don't
know of any tbh). But it's a nice cleanup, so let's do it.
There's been a few questions on previous iterations on dri-devel and
irc:
- fb_is_primary_device() seems to be yet another implementation of
this theme, and at least on x86 it checks for both
vga_default_device OR rom shadowing. There shouldn't ever be a case
where rom shadowing gives any additional hints about the boot vga
device, but if there is then the default vga selection in vgaarb
should probably be fixed. And not special-case checks replicated all
over.
- Thomas also brought up that on most !x86 systems
fb_is_primary_device() returns 0, except on sparc/parisc. But these
2 special cases are about platform specific devices and not pci, so
shouldn't have any interactions.
- Furthermore fb_is_primary_device() is a bit a red herring since it's
only used to select the right fbdev driver for fbcon, and not for
the fw handover dance which the aperture helpers handle. At least
for x86 we might want to look into unifying them, but that's a
separate thing.
v2: Extend commit message trying to summarize various discussions.
v4:
- make the test for the primary device easier to read (Javier)
- fix commit message style (i.e., commit 1234 ("..."))
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-3-tzimmermann@suse.de
This one nukes all framebuffers, which is a bit much. In reality
gma500 is igpu and never shipped with anything discrete, so there should
not be any difference.
v2: Unfortunately the framebuffer sits outside of the pci bars for
gma500, and so only using the pci helpers won't be enough. Otoh if we
only use non-pci helper, then we don't get the vga handling, and
subsequent refactoring to untangle these special cases won't work.
It's not pretty, but the simplest fix (since gma500 really is the only
quirky pci driver like this we have) is to just have both calls.
v4:
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-2-tzimmermann@suse.de
