Pull networking fixes from David Miller:
"A little more than usual this time around. Been travelling, so that is
part of it.
Anyways, here are the highlights:
1) Deal with memcontrol races wrt. listener dismantle, from Eric
Dumazet.
2) Handle page allocation failures properly in nfp driver, from Jaku
Kicinski.
3) Fix memory leaks in macsec, from Sabrina Dubroca.
4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault.
5) Several fixes in bnxt_en driver, including preventing potential
NVRAM parameter corruption from Michael Chan.
6) Fix for KRACK attacks in wireless, from Johannes Berg.
7) rtnetlink event generation fixes from Xin Long.
8) Deadlock in mlxsw driver, from Ido Schimmel.
9) Disallow arithmetic operations on context pointers in bpf, from
Jakub Kicinski.
10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from
Xin Long.
11) Only TCP is supported for sockmap, make that explicit with a
check, from John Fastabend.
12) Fix IP options state races in DCCP and TCP, from Eric Dumazet.
13) Fix panic in packet_getsockopt(), also from Eric Dumazet.
14) Add missing locked in hv_sock layer, from Dexuan Cui.
15) Various aquantia bug fixes, including several statistics handling
cures. From Igor Russkikh et al.
16) Fix arithmetic overflow in devmap code, from John Fastabend.
17) Fix busted socket memory accounting when we get a fault in the tcp
zero copy paths. From Willem de Bruijn.
18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
stmmac: Don't access tx_q->dirty_tx before netif_tx_lock
ipv6: flowlabel: do not leave opt->tot_len with garbage
of_mdio: Fix broken PHY IRQ in case of probe deferral
textsearch: fix typos in library helpers
rxrpc: Don't release call mutex on error pointer
net: stmmac: Prevent infinite loop in get_rx_timestamp_status()
net: stmmac: Fix stmmac_get_rx_hwtstamp()
net: stmmac: Add missing call to dev_kfree_skb()
mlxsw: spectrum_router: Configure TIGCR on init
mlxsw: reg: Add Tunneling IPinIP General Configuration Register
net: ethtool: remove error check for legacy setting transceiver type
soreuseport: fix initialization race
net: bridge: fix returning of vlan range op errors
sock: correct sk_wmem_queued accounting on efault in tcp zerocopy
bpf: add test cases to bpf selftests to cover all access tests
bpf: fix pattern matches for direct packet access
bpf: fix off by one for range markings with L{T, E} patterns
bpf: devmap fix arithmetic overflow in bitmap_size calculation
net: aquantia: Bad udp rate on default interrupt coalescing
net: aquantia: Enable coalescing management via ethtool interface
...
Lets add test cases to cover really all possible direct packet
access tests for good/bad access cases so we keep tracking them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb->mark field is a union with reserved_tailroom which is used
in the TCP code paths from stream memory allocation. Allowing SK_SKB
programs to set this field creates a conflict with future code
optimizations, such as "gifting" the skb to the egress path instead
of creating a new skb and doing a memcpy.
Because we do not have a released version of SK_SKB yet lets just
remove it for now. A more appropriate scratch pad to use at the
socket layer is dev_scratch, but lets add that in future kernels
when needed.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
SK_SKB BPF programs are run from the socket/tcp context but early in
the stack before much of the TCP metadata is needed in tcp_skb_cb. So
we can use some unused fields to place BPF metadata needed for SK_SKB
programs when implementing the redirect function.
This allows us to drop the preempt disable logic. It does however
require an API change so sk_redirect_map() has been updated to
additionally provide ctx_ptr to skb. Note, we do however continue to
disable/enable preemption around actual BPF program running to account
for map updates.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only TCP sockets have been tested and at the moment the state change
callback only handles TCP sockets. This adds a check to ensure that
sockets actually being added are TCP sockets.
For net-next we can consider UDP support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f1174f77b5 ("bpf/verifier: rework value tracking")
removed the crafty selection of which pointer types are
allowed to be modified. This is OK for most pointer types
since adjust_ptr_min_max_vals() will catch operations on
immutable pointers. One exception is PTR_TO_CTX which is
now allowed to be offseted freely.
The intent of aforementioned commit was to allow context
access via modified registers. The offset passed to
->is_valid_access() verifier callback has been adjusted
by the value of the variable offset.
What is missing, however, is taking the variable offset
into account when the context register is used. Or in terms
of the code adding the offset to the value passed to the
->convert_ctx_access() callback. This leads to the following
eBPF user code:
r1 += 68
r0 = *(u32 *)(r1 + 8)
exit
being translated to this in kernel space:
0: (07) r1 += 68
1: (61) r0 = *(u32 *)(r1 +180)
2: (95) exit
Offset 8 is corresponding to 180 in the kernel, but offset
76 is valid too. Verifier will "accept" access to offset
68+8=76 but then "convert" access to offset 8 as 180.
Effective access to offset 248 is beyond the kernel context.
(This is a __sk_buff example on a debug-heavy kernel -
packet mark is 8 -> 180, 76 would be data.)
Dereferencing the modified context pointer is not as easy
as dereferencing other types, because we have to translate
the access to reading a field in kernel structures which is
usually at a different offset and often of a different size.
To allow modifying the pointer we would have to make sure
that given eBPF instruction will always access the same
field or the fields accessed are "compatible" in terms of
offset and size...
Disallow dereferencing modified context pointers and add
to selftests the test case described here.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I was stress testing some backports and with high load, after some time,
the latest version of the selftest showed some false positive in
connection with the uffdio_copy_retry. This seems to fix it while still
exercising -EEXIST in the background transfer once in a while.
The fork child will quit after the last UFFDIO_COPY is run, so a
repeated UFFDIO_COPY may not return -EEXIST. This change restricts the
-EEXIST stress to the background transfer where the memory can't go away
from under it.
Also updated uffdio_zeropage, so the interface is consistent.
Link: http://lkml.kernel.org/r/20171004171541.1495-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This update consists of:
- fix for x86: sysret_ss_attrs test build failure preventing the x86
tests from running.
- fix mqueue: fix regression in silencing test run output.
-----BEGIN PGP SIGNATURE-----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=V+1w
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.14-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- fix for x86: sysret_ss_attrs test build failure preventing the x86
tests from running
- fix mqueue: fix regression in silencing test run output
* tag 'linux-kselftest-4.14-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: mqueue: fix regression in silencing output from RUN_TESTS
selftests: x86: sysret_ss_attrs doesn't build on a PIE build
The > should be >= so that we don't write one element beyond the end of
the array.
Fixes: 16e7812241 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix fix regression in silencing output from RUN_TESTS introduced by
commit <8230b905a6780c6> selftests: mqueue: Use full path to run tests
from Makefile
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
sysret_ss_attrs fails to compile leading x86 test run to fail on systems
configured to build using PIE by default. Add -no-pie fix it.
Relocation might still fail if relocated above 4G. For now this change
fixes the build and runs x86 tests.
tools/testing/selftests/x86$ make
gcc -m64 -o .../tools/testing/selftests/x86/single_step_syscall_64 -O2
-g -std=gnu99 -pthread -Wall single_step_syscall.c -lrt -ldl
gcc -m64 -o .../tools/testing/selftests/x86/sysret_ss_attrs_64 -O2 -g
-std=gnu99 -pthread -Wall sysret_ss_attrs.c thunks.S -lrt -ldl
/usr/bin/ld: /tmp/ccS6pvIh.o: relocation R_X86_64_32S against `.text'
can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Nonrepresentable section on output
collect2: error: ld returned 1 exit status
Makefile:49: recipe for target
'.../tools/testing/selftests/x86/sysret_ss_attrs_64' failed
make: *** [.../tools/testing/selftests/x86/sysret_ss_attrs_64] Error 1
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This update consists of:
- fixes to several existing tests
- a test for regression introduced by
b9470c2760 ("inet: kill smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results
-----BEGIN PGP SIGNATURE-----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=FUuY
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of:
- fixes to several existing tests
- a test for regression introduced by b9470c2760 ("inet: kill
smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results"
* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
selftests: timers: set-timer-lat: fix hang when std out/err are redirected
selftests/memfd: correct run_tests.sh permission
selftests/seccomp: Support glibc 2.26 siginfo_t.h
selftests: futex: Makefile: fix for loops in targets to run silently
selftests: Makefile: fix for loops in targets to run silently
selftests: mqueue: Use full path to run tests from Makefile
selftests: futex: copy sub-dir test scripts for make O=dir run
selftests: lib.mk: copy test scripts and test files for make O=dir run
selftests: sync: kselftest and kselftest-clean fail for make O=dir case
selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
selftests: lib.mk: fix test executable status check to use full path
selftests: Makefile: clear LDFLAGS for make O=dir use-case
selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
Makefile: kselftest and kselftest-clean fail for make O=dir case
selftests/net: msg_zerocopy enable build with older kernel headers
selftests: actually run the various net selftests
selftest: add a reuseaddr test
...
When timer_create() fails on a bootime or realtime clock, setup_timer()
returns 0 as if timer has been set. Callers wait forever for the timer
to expire.
This hang is seen on a system that doesn't have support for:
CLOCK_REALTIME_ALARM ABSTIME missing CAP_WAKE_ALARM? : [UNSUPPORTED]
Test hangs waiting for a timer that hasn't been set to expire. Fix
setup_timer() to return 1, add handling in callers to detect the
unsupported case and return 0 without waiting to not fail the test.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
do_timer_oneshot() uses select() as a timer with FD_SETSIZE and readfs
is cleared with FD_ZERO without FD_SET.
When stdout and stderr are redirected, the test hangs in select forever.
Fix the problem calling select() with readfds empty and nfds zero. This
is sufficient for using select() for timer.
With this fix "./set-timer-lat > /dev/null 2>&1" no longer hangs.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
to fix the following issue:
------------------
TAP version 13
selftests: run_tests.sh
========================================
selftests: Warning: file run_tests.sh is not executable, correct this.
not ok 1..1 selftests: run_tests.sh [FAIL]
------------------
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The 2.26 release of glibc changed how siginfo_t is defined, and the earlier
work-around to using the kernel definition are no longer needed. The old
way needs to stay around for a while, though.
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Fix for loops in targets to run silently to avoid cluttering the test
results.
Suppresses the following from targets:
for DIR in functional; do \
BUILD_TARGET=./tools/testing/selftests/futex/$DIR; \
mkdir $BUILD_TARGET -p; \
make OUTPUT=$BUILD_TARGET -C $DIR all;\
done
./tools/testing/selftests/futex/run.sh
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Fix for loops in targets to run silently to avoid cluttering the test
results.
Suppresses the following from targets: e.g run from breakpoints
for TARGET in breakpoints; do \
BUILD_TARGET=$BUILD/$TARGET; \
mkdir $BUILD_TARGET -p; \
make OUTPUT=$BUILD_TARGET -C $TARGET;\
done;
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use full path including $(OUTPUT) to run tests from Makefile for
normal case when objects reside in the source tree as well as when
objects are relocated with make O=dir. In both cases $(OUTPUT) will
be set correctly by lib.mk.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
For make O=dir run_tests to work, test scripts from sub-directories
need to be copied over to the object directory. Running tests from the
object directory is necessary to avoid making the source tree dirty.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
- sysctl and seccomp operation to discover available actions. (tyhicks)
- new per-filter configurable logging infrastructure and sysctl. (tyhicks)
- SECCOMP_RET_LOG to log allowed syscalls. (tyhicks)
- SECCOMP_RET_KILL_PROCESS as the new strictest possible action.
- self-tests for new behaviors.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=sKeC
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"Major additions:
- sysctl and seccomp operation to discover available actions
(tyhicks)
- new per-filter configurable logging infrastructure and sysctl
(tyhicks)
- SECCOMP_RET_LOG to log allowed syscalls (tyhicks)
- SECCOMP_RET_KILL_PROCESS as the new strictest possible action
- self-tests for new behaviors"
[ This is the seccomp part of the security pull request during the merge
window that was nixed due to unrelated problems - Linus ]
* tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
samples: Unrename SECCOMP_RET_KILL
selftests/seccomp: Test thread vs process killing
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
seccomp: Introduce SECCOMP_RET_KILL_PROCESS
seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD
seccomp: Action to log before allowing
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
seccomp: Selftest for detection of filter flag support
seccomp: Sysctl to configure actions that are allowed to be logged
seccomp: Operation for checking if an action is available
seccomp: Sysctl to display available actions
seccomp: Provide matching filter for introspection
selftests/seccomp: Refactor RET_ERRNO tests
selftests/seccomp: Add simple seccomp overhead benchmark
selftests/seccomp: Add tests for basic ptrace actions
For make O=dir run_tests to work, test scripts, test files, and other
dependencies need to be copied over to the object directory. Running
tests from the object directory is necessary to avoid making the source
tree dirty.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
sync test fails to build when object directory is specified to relocate
object files. Fix it to specify the correct path. Fix clean target to
remove objects. Also include simplified logic to use TEST_CUSTOM_PROGS
in build and clean targets instead of hard-coding the test name each
time.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
lib.mk var TEST_CUSTOM_PROGS is for tests that need custom build
rules. TEST_PROGS is used for test shell scripts. Fix it to use
TEST_CUSTOM_PROGS. lib.mk will run and install them.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Some tests such as sync can't use generic build rules in lib.mk and require
custom rules. Currently there is no provision to allow custom builds and
test such as sync use TEST_PROGS which is reserved for test shell scripts.
Add TEST_CUSTOM_PROGS variable to lib.mk to run and install custom tests
built by individual test make files.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
TEST_PROGS should be used for test scripts that don't ned to be built.
Use TEST_GEN_PROGS instead which is intended for test executables.
Remove clean target and let the common clean take care of cleaning.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Fix test executable status check to use full path for make O=dir case,m
when tests are relocated to user specified object directory. Without the
full path, this check fails to find the file and fails the test.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
kselftest target fails when object directory is specified to relocate
objects. Inherited "LDFLAGS = -m" fails the test builds. Clear it.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
kselftest and kselftest-clean targets fail when object directory is
specified to relocate objects. Main Makefile make O= path clears the
built-in defines LINK.c, COMPILE.S, LINK.S, and RM that are used in
lib.mk to build and clean targets. Define them.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Explicitly define SO_EE_ORIGIN_ZEROCOPY.
This makes the test program build with older kernel headers,
e.g. from Debian 9.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
These self tests are just self contained binaries, they are not run by
any of the scripts in the directory. This means they need to be marked
with TEST_GEN_PROGS to actually be run, not TEST_GEN_FILES.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This is to test for a regression introduced by
b9470c2760 ("inet: kill smallest_size and smallest_port")
which introduced a problem with reuseaddr and bind conflicts.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Some of the networking tests are very noisy and make it impossible to
see if we actually passed the tests as they run. Default to suppressing
the output from any tests run in order to make it easier to track what
failed.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Improve coverage of NVDIMM-N test scenarios by providing a test bus
incapable of label operations.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The multiple_kprobes test case fails to check for KPROBE_EVENT support.
Add the check to prevent a false test result.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The current implementation fails to work on uniprocessor systems.
Fix the parser to also handle the uniprocessor case.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Both test programs are being compiled by make, so no need to compile both
programs in the runner script.
This resolves an error when installing all selftests via make install
and run them in a different environemnt.
Running tests in intel_pstate
========================================
./run.sh: line 35: gcc: command not found
Problem compiling aperf.c.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
These tests are only for x86, so don't try to build or run
them on other architectures.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
breakpoint_test can fail on arm64 with older/unpatched glibc:
breakpoint_test_arm64.c: In function 'run_test':
breakpoint_test_arm64.c:170:25: error: 'TRAP_HWBKPT' undeclared (first use
in this function)
due to glibc missing several of the TRAP_* constants in the userspace
definitions. Specifically TRAP_BRANCH and TRAP_HWBKPT.
See https://sourceware.org/bugzilla/show_bug.cgi?id=21286
It prevents to build step_after_suspend_test afterward, since make won't
continue.
We still want to be able to build and run the test, independently of
breakpoint_test_arm64 build failure. Re-order TEST_GEN_PROGS to be able to
build step_after_suspend_test first.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
On s390x the compilation of the file sas.c in directory
tools/testing/selftests/sigaltstack fails with this error message:
root@s35lp76 testing]# make selftests/sigaltstack/sas
cc selftests/sigaltstack/sas.c -o selftests/sigaltstack/sas
selftests/sigaltstack/sas.c: In function ‘my_usr1’:
selftests/sigaltstack/sas.c:42:25: error: invalid register name for ‘sp’
register unsigned long sp asm("sp");
^~
<builtin>: recipe for target 'selftests/sigaltstack/sas' failed
make: *** [selftests/sigaltstack/sas] Error 1
[root@s35lp76 testing]#
On s390x the stack pointer is register r15, the register name "sp"
is unknown.
Make this line platform dependend and use register r15.
With this patch the compilation and test succeeds:
[root@s35lp76 testing]# ./selftests/sigaltstack/sas
TAP version 13
ok 1 Initial sigaltstack state was SS_DISABLE
# [RUN] signal USR1
ok 2 sigaltstack is disabled in sighandler
# [RUN] switched to user ctx
# [RUN] signal USR2
# [OK] Stack preserved
ok 3 sigaltstack is still SS_AUTODISARM after signal
Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..3
[root@s35lp76 testing]#
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The ip tool might be provided by another package (such as
Busybox), not necessarily implementing the -Version switch.
Trying an actual usage (`ip link show') might be a better
test that would work with all implementations of `ip'.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Pull networking fixes from David Miller:
1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger.
2) Fix double-free in rmnet driver, from Dan Carpenter.
3) INET connection socket layer can double put request sockets, fix
from Eric Dumazet.
4) Don't match collect metadata-mode tunnels if the device is down,
from Haishuang Yan.
5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in
be2net driver, from Suresh Reddy.
6) Fix scaling error in gen_estimator, from Eric Dumazet.
7) Fix 64-bit statistics deadlock in systemport driver, from Florian
Fainelli.
8) Fix use-after-free in sctp_sock_dump, from Xin Long.
9) Reject invalid BPF_END instructions in verifier, from Edward Cree.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
mlxsw: spectrum_router: Only handle IPv4 and IPv6 events
Documentation: link in networking docs
tcp: fix data delivery rate
bpf/verifier: reject BPF_ALU64|BPF_END
sctp: do not mark sk dumped when inet_sctp_diag_fill returns err
sctp: fix an use-after-free issue in sctp_sock_dump
netvsc: increase default receive buffer size
tcp: update skb->skb_mstamp more carefully
net: ipv4: fix l3slave check for index returned in IP_PKTINFO
net: smsc911x: Quieten netif during suspend
net: systemport: Fix 64-bit stats deadlock
net: vrf: avoid gcc-4.6 warning
qed: remove unnecessary call to memset
tg3: clean up redundant initialization of tnapi
tls: make tls_sw_free_resources static
sctp: potential read out of bounds in sctp_ulpevent_type_enabled()
MAINTAINERS: review Renesas DT bindings as well
net_sched: gen_estimator: fix scaling error in bytes/packets samples
nfp: wait for the NSP resource to appear on boot
nfp: wait for board state before talking to the NSP
...
Neither ___bpf_prog_run nor the JITs accept it.
Also adds a new test case.
Fixes: 17a5267067 ("bpf: verifier (add verifier core)")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull namespace updates from Eric Biederman:
"Life has been busy and I have not gotten half as much done this round
as I would have liked. I delayed it so that a minor conflict
resolution with the mips tree could spend a little time in linux-next
before I sent this pull request.
This includes two long delayed user namespace changes from Kirill
Tkhai. It also includes a very useful change from Serge Hallyn that
allows the security capability attribute to be used inside of user
namespaces. The practical effect of this is people can now untar
tarballs and install rpms in user namespaces. It had been suggested to
generalize this and encode some of the namespace information
information in the xattr name. Upon close inspection that makes the
things that should be hard easy and the things that should be easy
more expensive.
Then there is my bugfix/cleanup for signal injection that removes the
magic encoding of the siginfo union member from the kernel internal
si_code. The mips folks reported the case where I had used FPE_FIXME
me is impossible so I have remove FPE_FIXME from mips, while at the
same time including a return statement in that case to keep gcc from
complaining about unitialized variables.
I almost finished the work to get make copy_siginfo_to_user a trivial
copy to user. The code is available at:
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git neuter-copy_siginfo_to_user-v3
But I did not have time/energy to get the code posted and reviewed
before the merge window opened.
I was able to see that the security excuse for just copying fields
that we know are initialized doesn't work in practice there are buggy
initializations that don't initialize the proper fields in siginfo. So
we still sometimes copy unitialized data to userspace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
Introduce v3 namespaced file capabilities
mips/signal: In force_fcr31_sig return in the impossible case
signal: Remove kernel interal si_code magic
fcntl: Don't use ambiguous SIG_POLL si_codes
prctl: Allow local CAP_SYS_ADMIN changing exe_file
security: Use user_namespace::level to avoid redundant iterations in cap_capable()
userns,pidns: Verify the userns for new pid namespaces
signal/testing: Don't look for __SI_FAULT in userspace
signal/mips: Document a conflict with SI_USER with SIGFPE
signal/sparc: Document a conflict with SI_USER with SIGFPE
signal/ia64: Document a conflict with SI_USER with SIGFPE
signal/alpha: Document a conflict with SI_USER for SIGTRAP
* Media error handling support in the Block Translation Table (BTT)
driver is reworked to address sleeping-while-atomic locking and
memory-allocation-context conflicts.
* The dax_device lookup overhead for xfs and ext4 is moved out of the
iomap hot-path to a mount-time lookup.
* A new 'ecc_unit_size' sysfs attribute is added to advertise the
read-modify-write boundary property of a persistent memory range.
* Preparatory fix-ups for arm and powerpc pmem support are included
along with other miscellaneous fixes.
-----BEGIN PGP SIGNATURE-----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=5iGY
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm from Dan Williams:
"A rework of media error handling in the BTT driver and other updates.
It has appeared in a few -next releases and collected some late-
breaking build-error and warning fixups as a result.
Summary:
- Media error handling support in the Block Translation Table (BTT)
driver is reworked to address sleeping-while-atomic locking and
memory-allocation-context conflicts.
- The dax_device lookup overhead for xfs and ext4 is moved out of the
iomap hot-path to a mount-time lookup.
- A new 'ecc_unit_size' sysfs attribute is added to advertise the
read-modify-write boundary property of a persistent memory range.
- Preparatory fix-ups for arm and powerpc pmem support are included
along with other miscellaneous fixes"
* tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits)
libnvdimm, btt: fix format string warnings
libnvdimm, btt: clean up warning and error messages
ext4: fix null pointer dereference on sbi
libnvdimm, nfit: move the check on nd_reserved2 to the endpoint
dax: fix FS_DAX=n BLOCK=y compilation
libnvdimm: fix integer overflow static analysis warning
libnvdimm, nd_blk: remove mmio_flush_range()
libnvdimm, btt: rework error clearing
libnvdimm: fix potential deadlock while clearing errors
libnvdimm, btt: cache sector_size in arena_info
libnvdimm, btt: ensure that flags were also unchanged during a map_read
libnvdimm, btt: refactor map entry operations with macros
libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path
libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute
ext4: perform dax_device lookup at mount
ext2: perform dax_device lookup at mount
xfs: perform dax_device lookup at mount
dax: introduce a fs_dax_get_by_bdev() helper
libnvdimm, btt: check memory allocation failure
libnvdimm, label: fix index block size calculation
...
Pull networking fixes from David Miller:
"The iwlwifi firmware compat fix is in here as well as some other
stuff:
1) Fix request socket leak introduced by BPF deadlock fix, from Eric
Dumazet.
2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg.
3) Missing __qdisc_drop conversions in prio and qfq schedulers, from
Gao Feng.
4) Use after free in netlink nlk groups handling, from Xin Long.
5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long.
6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca
with follow-on fix from Eric Dumazet.
7) Need RCU and preemption disabled during generic XDP data patch,
from John Fastabend"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
bpf: make error reporting in bpf_warn_invalid_xdp_action more clear
Revert "mdio_bus: Remove unneeded gpiod NULL check"
bpf: devmap, use cond_resched instead of cpu_relax
bpf: add support for sockmap detach programs
net: rcu lock and preempt disable missing around generic xdp
bpf: don't select potentially stale ri->map from buggy xdp progs
net: tulip: Constify tulip_tbl
net: ethernet: ti: netcp_core: no need in netif_napi_del
davicom: Display proper debug level up to 6
net: phy: sfp: rename dt properties to match the binding
dt-binding: net: sfp binding documentation
dt-bindings: add SFF vendor prefix
dt-bindings: net: don't confuse with generic PHY property
ip6_tunnel: fix setting hop_limit value for ipv6 tunnel
ip_tunnel: fix setting ttl and tos value in collect_md mode
ipv6: fix typo in fib6_net_exit()
tcp: fix a request socket leak
sctp: fix missing wake ups in some situations
netfilter: xt_hashlimit: fix build error caused by 64bit division
netfilter: xt_hashlimit: alloc hashtable with right size
...
Merge more updates from Andrew Morton:
- most of the rest of MM
- a small number of misc things
- lib/ updates
- checkpatch
- autofs updates
- ipc/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits)
ipc: optimize semget/shmget/msgget for lots of keys
ipc/sem: play nicer with large nsops allocations
ipc/sem: drop sem_checkid helper
ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t
ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t
ipc: convert ipc_namespace.count from atomic_t to refcount_t
kcov: support compat processes
sh: defconfig: cleanup from old Kconfig options
mn10300: defconfig: cleanup from old Kconfig options
m32r: defconfig: cleanup from old Kconfig options
drivers/pps: use surrounding "if PPS" to remove numerous dependency checks
drivers/pps: aesthetic tweaks to PPS-related content
cpumask: make cpumask_next() out-of-line
kmod: move #ifdef CONFIG_MODULES wrapper to Makefile
kmod: split off umh headers into its own file
MAINTAINERS: clarify kmod is just a kernel module loader
kmod: split out umh code into its own file
test_kmod: flip INT checks to be consistent
test_kmod: remove paranoid UINT_MAX check on uint range processing
vfat: deduplicate hex2bin()
...
The bpf map sockmap supports adding programs via attach commands. This
patch adds the detach command to keep the API symmetric and allow
users to remove previously added programs. Otherwise the user would
have to delete the map and re-add it to get in this state.
This also adds a series of additional tests to capture detach operation
and also attaching/detaching invalid prog types.
API note: socks will run (or not run) programs depending on the state
of the map at the time the sock is added. We do not for example walk
the map and remove programs from previously attached socks.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This update consists of:
-- TAP13 framework API and converting tests to TAP13 continues. A few
more tests are converted and kselftest common RUN_TESTS in lib.mk
is enhanced to print TAP13 to cover test shell scripts that won't
be able to use kselftest API.
-- Several fixes to existing tests to not fail in unsupported cases.
This has been an ongoing work based on the feedback from stable
release kselftest users.
-- A new watchdog test and much needed cleanups to the existing tests
from Eugeniu Rosca.
-- Changes to kselftest common lib.mk framework to make RUN_TESTS a
function to be called from individual test make files to run stress
and destructive sub-tests.
-----BEGIN PGP SIGNATURE-----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=RVb5
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.14-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- TAP13 framework API and converting tests to TAP13 continues. A few
more tests are converted and kselftest common RUN_TESTS in lib.mk is
enhanced to print TAP13 to cover test shell scripts that won't be
able to use kselftest API.
- Several fixes to existing tests to not fail in unsupported cases.
This has been an ongoing work based on the feedback from stable
release kselftest users.
- A new watchdog test and much needed cleanups to the existing tests
from Eugeniu Rosca.
- Changes to kselftest common lib.mk framework to make RUN_TESTS a
function to be called from individual test make files to run stress
and destructive sub-tests.
* tag 'linux-kselftest-4.14-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
selftests: Enhance kselftest_harness.h to print which assert failed
selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format
selftests: change lib.mk RUN_TESTS to take test list as an argument
selftests: lib.mk: suppress "cd" output from run_tests target
selftests: kselftest framework: change skip exit code to 0
selftests/timers: make loop consistent with array size
selftests: timers: remove rtctest_setdate from run_destructive_tests
selftests: timers: Fix run_destructive_tests target to handle skipped tests
kselftests: timers: leap-a-day: Change default arguments to help test runs
selftests: timers: drop support for !KTEST case
rtc: rtctest: Improve support detection
selftests/cpu-hotplug: Skip test when there is only one online cpu
selftests/cpu-hotplug: exit with failure when test occured unexpected behaviors
selftests: futex: convert test to use ksft TAP13 framework
selftests: capabilities: convert error output to TAP13 ksft framework
selftests: memfd: Align STACK_SIZE for ARM AArch64 system
selftests: warn if failure is due to lack of executable bit
selftests: kselftest framework: add error counter
selftests: capabilities: convert the test to use TAP13 ksft framework
selftests: capabilities: fix to run Non-root +ia, sgidroot => i test
...
Linus Torvalds