Commit graph

67 commits

Author SHA1 Message Date
Alan Mikhak
dbb7bbcc8a PCI: endpoint: Clear BAR before freeing its space
Associated pci_epf_bar structure is needed in pci_epc_clear_bar() to
clear a BAR correctly but it is reset in pci_epf_free_space() (that
is called first) which results in pci_epc_clear_bar() failure.

Reorder the pci_epc_clear_bar()/pci_epf_free_space() calls execution
to fix the issue.

Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
[lorenzo.pieralisi@arm.com: reworded the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-06-11 10:57:54 +01:00
Alan Mikhak
3041a64361 PCI: endpoint: Skip odd BAR when skipping 64bit BAR
Always skip odd BAR when skipping 64bit BARs in pci_epf_test_set_bar()
and pci_epf_test_alloc_space() otherwise pci_epf_test_set_bar() will
call pci_epc_set_bar() on an odd loop index when skipping reserved 64bit
BAR.

Moreover, pci_epf_test_alloc_space() will call pci_epf_alloc_space() on
bind for an odd loop index when BAR is 64bit but leaks on subsequent
unbind by not calling pci_epf_free_space().

Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-11 10:55:36 +01:00
Alan Mikhak
f16fb16ed1 PCI: endpoint: Allocate enough space for fixed size BAR
PCI endpoint test function code should honor the .bar_fixed_size parameter
from underlying endpoint controller drivers or results may be unexpected.

In pci_epf_test_alloc_space(), check if BAR being used for test
register space is a fixed size BAR. If so, allocate the required fixed
size.

Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-06-11 10:55:22 +01:00
Alan Mikhak
db7a62482d PCI: endpoint: Set endpoint controller pointer to NULL
Set endpoint controller pointer to NULL in pci_epc_remove_epf()
to avoid -EBUSY on subsequent call to pci_epc_add_epf().

Add a check for NULL endpoint function pointer.

Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-06-11 10:55:12 +01:00
Bjorn Helgaas
ee6df38da8 Merge branch 'remotes/lorenzo/pci/misc'
- Exit pcitest with error code when test fails (Jean-Jacques Hiblot)

  - Fix leaked of_node references in dra7xx, uniphier, layerscape,
    rockchip, aardvark, iproc, mediatek, rpadlpar (Wen Yang)

  - Fix pcitest "help" option parsing (Kishon Vijay Abraham I)

  - Fix Makefile bug that inadvertently removes pcitest.sh (Kishon Vijay
    Abraham I)

  - Check for alloc_workqueue() failure in endpoint test driver (Kangjie
    Lu)

* remotes/lorenzo/pci/misc:
  PCI: endpoint: Fix a potential NULL pointer dereference
  tools: PCI: Handle pcitest.sh independently from pcitest
  tools: PCI: Add 'h' in optstring of getopt()
  PCI: mediatek: Fix a leaked reference by adding missing of_node_put()
  PCI: iproc: Fix a leaked reference by adding missing of_node_put()
  PCI: aardvark: Fix a leaked reference by adding missing of_node_put()
  PCI: rockchip: Fix a leaked reference by adding missing of_node_put()
  PCI: dwc: layerscape: Fix a leaked reference by adding missing of_node_put()
  PCI: uniphier: Fix a leaked reference by adding missing of_node_put()
  PCI: dwc: pci-dra7xx: Fix a leaked reference by adding missing of_node_put()
  tools: PCI: Exit with error code when test fails
2019-05-13 18:34:44 -05:00
Kishon Vijay Abraham I
2a9a801620 PCI: endpoint: Add support to specify alignment for buffers allocated to BARs
The address that is allocated using pci_epf_alloc_space() is
directly written to the target address of the Inbound Address
Translation unit (ie the HW component implementing inbound address
decoding) on endpoint controllers.

Designware IP [1] has a configuration parameter (CX_ATU_MIN_REGION_SIZE
[2]) which has 64KB as default value and the lower 16 bits of the Base,
Limit and Target registers of the Inbound ATU are fixed to zero. If the
programmed memory address is not aligned to 64 KB boundary this causes
memory corruption.

Modify pci_epf_alloc_space() API to take alignment size as argument in
order to allocate buffers to be mapped to BARs with an alignment that
suits the platform where they are used.

Add an 'align' parameter to epc_features which can be used by platform
drivers to specify the BAR allocation alignment requirements and use
this while invoking pci_epf_alloc_space().

[1] "I/O and MEM Match Modes" section in DesignWare Cores PCI Express
     Controller Databook version 4.90a
[2]  http://www.ti.com/lit/ug/spruid7c/spruid7c.pdf

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-04-15 13:24:02 +01:00
Kangjie Lu
507b820009 PCI: endpoint: Fix a potential NULL pointer dereference
In case alloc_workqueue() fails, return -ENOMEM to avoid
potential NULL pointer dereferences.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
[lorenzo.pieralisi@arm.com: commit log and code update]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-04-12 15:25:09 +01:00
Kishon Vijay Abraham I
2c04c5b8ee PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features
Use pci_epc_get_features() to get EPC features such as linkup
notifier support, MSI/MSIX capable, BAR configuration etc and use it
for configuring pci-epf-test. Since these features are now obtained
directly from EPC driver, remove pci_epf_test_data which was initially
added to have EPC features in endpoint function driver.

Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-02-15 10:01:16 +00:00
Kishon Vijay Abraham I
b866c56b66 PCI: pci-epf-test: Do not allocate next BARs memory if current BAR is 64Bit
It's useless to allocate memory for next BAR if the current BAR is a
64Bit BAR. Stop allocating memory for the next BAR, if the current
BARs flag indicates this is a 64Bit BAR.

Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-02-15 10:00:18 +00:00
Kishon Vijay Abraham I
0342e9a797 PCI: pci-epf-test: Remove setting epf_bar flags in function driver
Now that pci_epf_alloc_space() sets BAR MEM TYPE flags as 64Bit or
32Bit based on size, remove setting it in function driver.

Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-02-15 10:00:09 +00:00
Kishon Vijay Abraham I
5544d67ed1 PCI: endpoint: Fix pci_epf_alloc_space() to set correct MEM TYPE flags
pci_epf_alloc_space() sets the MEM TYPE flags to indicate a 32-bit
Base Address Register irrespective of the size. Fix it here to indicate
64-bit BAR if the size is > 2GB.

Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-02-15 09:59:48 +00:00
Kishon Vijay Abraham I
1e9efe6c99 PCI: endpoint: Add helper to get first unreserved BAR
Add a helper function pci_epc_get_first_free_bar() to get the first
unreserved BAR that can be used for endpoint function.

Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-02-15 09:59:40 +00:00
Kishon Vijay Abraham I
41cb8d189c PCI: endpoint: Add new pci_epc_ops to get EPC features
Add a new pci_epc_ops ->get_features() to get the features
supported by the EPC. Since EPC can provide different features to
different functions, the ->get_features() ops takes _func_no_ as
an argument.

Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-02-14 16:08:10 +00:00
Wen Yang
726dabfde6 PCI: endpoint: functions: Use memcpy_fromio()/memcpy_toio()
Functions copying from/to IO addresses should use the
memcpy_fromio()/memcpy_toio() API rather than plain memcpy().

Fix the issue detected through the sparse tool.

Fixes: 349e7a85b2 ("PCI: endpoint: functions: Add an EP function to test PCI")
Suggested-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
[lorenzo.pieralisi@arm.com: updated log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
CC: Niklas Cassel <niklas.cassel@axis.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
CC: linux-pci@vger.kernel.org
CC: linux-kernel@vger.kernel.org
2019-02-13 09:50:58 +00:00
Christoph Hellwig
eb01d42a77 PCI: consolidate PCI config entry in drivers/pci
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
rest in drivers/pci.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-23 11:45:34 +09:00
Bjorn Helgaas
0c38011aba Merge branch 'remotes/lorenzo/pci/dwc'
- Add Kirin MSI support (Xiaowei Song)

  - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
    armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo)

  - Move link notification settings from DesignWare core to individual
    drivers (Gustavo Pimentel)

  - Add endpoint library MSI-X interfaces (Gustavo Pimentel)

  - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel)

  - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)

  - Add endpoint library MSI-X test support (Gustavo Pimentel)

* remotes/lorenzo/pci/dwc:
  PCI: endpoint: Add MSI set maximum restriction
  tools: PCI: Add MSI-X support
  pci_endpoint_test: Add 2 ioctl commands
  pci-epf-test/pci_endpoint_test: Add MSI-X support
  pci-epf-test/pci_endpoint_test: Use irq_type module parameter
  pci-epf-test/pci_endpoint_test: Cleanup PCI_ENDPOINT_TEST memspace
  PCI: dwc: Add legacy interrupt callback handler
  PCI: dwc: Rework MSI callbacks handler
  PCI: dwc: Add MSI-X callbacks handler
  PCI: Update xxx_pcie_ep_raise_irq() and pci_epc_raise_irq() signatures
  PCI: endpoint: Add MSI-X interfaces
  PCI: dwc: Fix EP link notification implementation
  PCI: spear13xx: Drop unnecessary root_bus_nr setting
  PCI: qcom: Drop unnecessary root_bus_nr setting
  PCI: histb: Drop unnecessary root_bus_nr setting
  PCI: designware-plat: Drop unnecessary root_bus_nr setting
  PCI: artpec6: Drop unnecessary root_bus_nr setting
  PCI: armada8k: Drop unnecessary root_bus_nr setting
  PCI: keystone: Drop unnecessary root_bus_nr setting
  PCI: imx6: Drop unnecessary root_bus_nr setting
  PCI: exynos: Drop unnecessary root_bus_nr setting
  PCI: kirin: Add MSI support
2018-08-15 14:59:11 -05:00
Gustavo Pimentel
15c972dfb3 PCI: endpoint: Add MSI set maximum restriction
Add pci_epc_set_msi() maximum 32 interrupts validation.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-19 11:47:25 +01:00
Gustavo Pimentel
c2e00e3108 pci-epf-test/pci_endpoint_test: Add MSI-X support
Add MSI-X support and update driver documentation accordingly.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-19 11:46:45 +01:00
Gustavo Pimentel
e8817de7fb pci-epf-test/pci_endpoint_test: Cleanup PCI_ENDPOINT_TEST memspace
Cleanup PCI_ENDPOINT_TEST memspace (by moving the interrupt number away
from command section).

Add IRQ_TYPE register to identify the triggered ID interrupt required
for the READ/WRITE/COPY tests and raise IRQ test commands.

Update documentation accordingly.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-19 11:39:44 +01:00
Gustavo Pimentel
d3c70a98d7 PCI: Update xxx_pcie_ep_raise_irq() and pci_epc_raise_irq() signatures
Change {cdns, dra7xx, artpec6, dw, rockchip}_pcie_ep_raise_irq() and
pci_epc_raise_irq() signature, namely the interrupt_num variable type
from u8 to u16 to accommodate 2048 maximum MSI-X interrupts.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Alan Douglas <adouglas@cadence.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-19 11:34:42 +01:00
Gustavo Pimentel
8963106eab PCI: endpoint: Add MSI-X interfaces
Add PCI_EPC_IRQ_MSIX type.

Add MSI-X callbacks signatures to the ops structure.

Add sysfs interface for set/get MSI-X capability maximum number.

Update documentation accordingly.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-19 11:34:23 +01:00
Kishon Vijay Abraham I
a83a217344 PCI: endpoint: Fix NULL pointer dereference error when CONFIGFS is disabled
commit ef1433f717 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry") while adding configfs entry for each
pci_epf_device_id table entry introduced a NULL pointer dereference error
when CONFIG_PCI_ENDPOINT_CONFIGFS is not enabled.

Fix it here.

Fixes: ef1433f717 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-09 15:19:51 -05:00
Dan Carpenter
fb0de5b8dc PCI: endpoint: Use after free in pci_epf_unregister_driver()
We need to use list_for_each_entry_safe() because the
pci_ep_cfs_remove_epf_group() function frees "group".

Fixes: ef1433f717 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-06-29 13:49:24 -05:00
Bjorn Helgaas
bf79d7d099 Merge branch 'lorenzo/pci/endpoint'
- use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai)

  - add configfs entries for pci_epf_driver device IDs (Kishon Vijay
    Abraham I)

  - clean up pci_endpoint_test driver (Gustavo Pimentel)

* lorenzo/pci/endpoint:
  PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry
  misc: pci_endpoint_test: Use pci_irq_vector function
  PCI: endpoint: functions/pci-epf-test: Replace lower into upper case characters
  misc: pci_endpoint_test: Replace lower into upper case characters
  PCI: endpoint: Replace mdelay with usleep_range() in pci_epf_test_write()
2018-06-06 16:10:30 -05:00
Kishon Vijay Abraham I
ef1433f717 PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry
In order to be able to provide correct driver_data for pci_epf device,
a separate configfs entry for each pci_epf_device_id table entry in
pci_epf_driver is required.

Add support to create configfs entry for each pci_epf_device_id
table entry here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2018-05-18 16:40:50 +01:00
Gustavo Pimentel
1d906b2207 PCI: dwc: Add support for EP mode
The PCIe controller dual mode is capable of operating in Root Complex
(RC) mode as well as EP mode by configuration option.

Add EP support to the DesignWare driver on top of RC mode support.

Add new property on pci_epc structure which allow to configure
pci_epf_test driver accordingly to the controller specific requirements.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-05-15 15:51:38 +01:00
Gustavo Pimentel
798c0441be PCI: endpoint: functions/pci-epf-test: Replace lower into upper case characters
Replace all initial lower case character into upper case in comments
and debug printks.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-15 15:13:10 +01:00
Jia-Ju Bai
9f96b9b7d8 PCI: endpoint: Replace mdelay with usleep_range() in pci_epf_test_write()
pci_epf_test_write() is never called in atomic context.

The call chain ending up at pci_epf_test_write() is:
[1] pci_epf_test_write() <- pci_epf_test_cmd_handler()

pci_epf_test_cmd_handler() is set as a parameter of INIT_DELAYED_WORK()
in pci_epf_test_probe().
This function is not called in atomic context.

Despite never getting called from atomic context, pci_epf_test_write()
calls mdelay() to busy wait.

This is not necessary and can be replaced with usleep_range() to
avoid busy waiting.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-05-08 11:13:42 +01:00
Niklas Cassel
6474a4e554 PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing
Since a 64-bit BAR consists of a BAR pair, and since there is no
BAR after BAR_5, BAR_5 cannot be 64-bits wide.

This sanity check is done in pci_epc_clear_bar(), so that we don't need
to do this sanity check in all epc->ops->clear_bar() implementations.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:38:05 +01:00
Niklas Cassel
77d08dbdae PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar
Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar.

This is needed so that epc->ops->clear_bar() can clear the BAR pair,
if the BAR is 64-bits wide.

This also makes it possible for pci_epc_clear_bar() to sanity check
the flags.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2018-04-03 12:38:05 +01:00
Niklas Cassel
fca8305875 PCI: endpoint: Handle 64-bit BARs properly
If a 64-bit BAR was set-up, we need to skip a BAR,
since a 64-bit BAR consists of a BAR pair.

We need to check what BAR width the epc->ops->set_bar() specific
implementation actually did set-up, since some drivers, like the
Cadence EP controller, sometimes sets up a 64-bit BAR, even though
a 32-bit BAR was requested.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:38:04 +01:00
Niklas Cassel
f25b5fae29 PCI: endpoint: Setting a BAR size > 4 GB is invalid if 64-bit flag is not set
Setting a BAR size > 4 GB is invalid if PCI_BASE_ADDRESS_MEM_TYPE_64
flag is not set.

This sanity check is done in pci_epc_set_bar(), so that we don't need
to do this sanity check in all epc->ops->set_bar() implementations.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:23:58 +01:00
Niklas Cassel
3567a4edd6 PCI: endpoint: Setting 64-bit/prefetch bit is invalid when IO is set
If flag PCI_BASE_ADDRESS_SPACE_IO is set, also having any
PCI_BASE_ADDRESS_MEM_* bit set is invalid.

This sanity check is done in pci_epc_set_bar(), so that we don't need
to do this sanity check in all epc->ops->set_bar() implementations.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:23:52 +01:00
Niklas Cassel
f16b1f6fdf PCI: endpoint: Setting BAR_5 to 64-bits wide is invalid
Since a 64-bit BAR consists of a BAR pair, and since there is no
BAR after BAR_5, BAR_5 cannot be 64-bits wide.

This sanity check is done in pci_epc_set_bar(), so that we don't need
to do this sanity check in all epc->ops->set_bar() implementations.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:23:47 +01:00
Niklas Cassel
bc4a48976f PCI: endpoint: Simplify epc->ops->set_bar()/pci_epc_set_bar()
Add barno and flags to struct epf_bar.
That way we can simplify epc->ops->set_bar()/pci_epc_set_bar()
by passing a struct *epf_bar instead of a whole lot of arguments.

This is needed so that epc->ops->set_bar() implementations can
modify BAR flags. Will be utilized in a succeeding patch.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:23:38 +01:00
Niklas Cassel
bf597574b6 PCI: endpoint: BAR width should not depend on sizeof dma_addr_t
If a BAR supports 64-bit width or not depends on the hardware,
and should thus not depend on sizeof(dma_addr_t).

If a certain hardware doesn't support 64-bit BARs, its
epc->ops->set_bar() implementation should return -EINVAL
when PCI_BASE_ADDRESS_MEM_TYPE_64 is set.

We can't change pci_epc_set_bar() to only set
PCI_BASE_ADDRESS_MEM_TYPE_64 based on size, since if the user,
for some reason, wants to configure a BAR with a 64-bit width,
even though the BAR size is less than 4 GB, he should be able
to do that.

However, since pci-epf-test is simply a test and not an API,
we can set PCI_BASE_ADDRESS_MEM_TYPE_64 in pci-epf-test itself
only based on size.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:23:30 +01:00
Rolf Evers-Fischer
50ee106137 PCI: endpoint: Remove goto labels in pci_epf_create()
Remove the pci_epf_create() goto labels completely and handle the
errors at the respective call site to simplify the function error
handling.

Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@aptiv.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-03-01 11:58:54 +00:00
Rolf Evers-Fischer
9eef6a5c3b PCI: endpoint: Fix kernel panic after put_device()
'put_device()' calls the relase function 'pci_epf_dev_release()',
which already frees 'epf->name' and 'epf'.

Therefore we must not free them again after 'put_device()'.

Fixes: 5e8cb40338 ("PCI: endpoint: Add EP core layer to enable EP controller and EP functions")

Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@aptiv.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-01 11:58:45 +00:00
Rolf Evers-Fischer
36cc14ac14 PCI: endpoint: Simplify name allocation for EPF device
This commit replaces allocating and freeing the intermediate
'buf'/'func_name' with a combination of 'kstrndup()' and 'len'.

'len' is the required length of 'epf->name'.
'epf->name' should be either the first part of 'name' preceding the '.'
or the complete 'name', if there is no '.' in the name.

Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@aptiv.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-01 11:58:18 +00:00
Bjorn Helgaas
ab8c609356 Merge branch 'pci/spdx' into next
* pci/spdx:
  PCI: Add SPDX GPL-2.0+ to replace implicit GPL v2 or later statement
  PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate
  PCI: Add SPDX GPL-2.0 to replace COPYING boilerplate
  PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate
  PCI: Add SPDX GPL-2.0 when no license was specified
2018-02-01 11:40:07 -06:00
Bjorn Helgaas
7dd113b7ca Merge remote-tracking branch 'lorenzo/pci/endpoint' into next
* lorenzo/pci/endpoint:
  PCI: endpoint: Use EPC's device in dma_alloc_coherent()/dma_free_coherent()
  PCI: designware-ep: Fix ->get_msi() to check MSI_EN bit
  PCI: endpoint: Fix find_first_zero_bit() usage
  PCI: endpoint: Populate func_no before calling pci_epc_add_epf()
  PCI: designware-ep: Fix find_first_zero_bit() usage
2018-02-01 11:40:01 -06:00
Cyrille Pitchen
fc41df28f8 PCI: endpoint: Fix EPF device name to support multi-function devices
Fix the pci_epf_make() function so it can now bind many EPF devices to the
same EPF driver.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-01-31 11:10:47 +00:00
Cyrille Pitchen
4494738de0 PCI: endpoint: Add the function number as argument to EPC ops
This patch updates the prototype of most handlers from 'struct
pci_epc_ops' so the EPC library can now support multi-function devices.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-01-31 11:10:41 +00:00
Bjorn Helgaas
8cfab3cf63 PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate
Add SPDX GPL-2.0 to all PCI files that specified the GPL version 2 license.

Remove the boilerplate GPL version 2 language, relying on the assertion in
b24413180f ("License cleanup: add SPDX GPL-2.0 license identifier to
files with no license") that the SPDX identifier may be used instead of the
full boilerplate text.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-28 15:48:29 -06:00
Bjorn Helgaas
7328c8f48d PCI: Add SPDX GPL-2.0 when no license was specified
b24413180f ("License cleanup: add SPDX GPL-2.0 license identifier to
files with no license") added SPDX GPL-2.0 to several PCI files that
previously contained no license information.

Add SPDX GPL-2.0 to all other PCI files that did not contain any license
information and hence were under the default GPL version 2 license of the
kernel.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-26 11:45:16 -06:00
Kishon Vijay Abraham I
b330104fa7 PCI: endpoint: Use EPC's device in dma_alloc_coherent()/dma_free_coherent()
After commit 7232888366 ("of: restrict DMA configuration"),
of_dma_configure() doesn't configure the coherent_dma_mask/dma_mask
of endpoint function device (since it doesn't have a DT node associated
with and hence no dma-ranges property), resulting in
dma_alloc_coherent() (used in pci_epf_alloc_space()) to fail.

Fix it by making dma_alloc_coherent() use EPC's device for allocating
memory address.

Link: http://lkml.kernel.org/r/64d63468-d28f-8fcd-a6f3-cf2a6401c8cb@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi@arm.com: tweaked commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-01-11 10:06:34 +00:00
Niklas Cassel
35ad61921f PCI: endpoint: Fix find_first_zero_bit() usage
find_first_zero_bit()'s parameter 'size' is defined in bits,
not in bytes.

Calling find_first_zero_bit() with the wrong size unit
will lead to insidious bugs.

Fix this by calling find_first_zero_bit() with size BITS_PER_LONG,
rather than sizeof() and add missing find_first_zero_bit() return
handling.

Fixes: d746799116 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-12-19 11:05:44 +00:00
Niklas Cassel
0c47cd7a9b PCI: endpoint: Populate func_no before calling pci_epc_add_epf()
func_no is a member of struct pci_epf.

Since struct pci_epf is used as an argument to pci_epc_add_epf() (to
bind an endpoint function to a controller), struct pci_epf.func_no
should be populated before calling pci_epc_add_epf().

Initialize the struct pci_epf.func_no member before calling
pci_epc_add_epf(), to fix the endpoint function binding to
an endpoint controller.

Fixes: d746799116 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Suggested-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-12-19 11:05:44 +00:00
Bhumika Goyal
5c4e2476ed PCI: endpoint: make config_item_type const
Make config_item_type structures const as they are either passed to a
function having the argument as const or stored in the const "ci_type"
field of a config_item structure.

Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-10-19 16:15:25 +02:00
John Keeping
749aaf3372 PCI: endpoint: Use correct "end of test" interrupt
pci_epf_test_raise_irq() reads the interrupt to use for the response from
reg->command, but this has been cleared at the beginning of the command
handler so the value is always zero at this point.

Instead, extract the interrupt index before handling the command and then
pass the requested interrupt into pci_epf_test_raise_irq().  This allows us
to remove the specific code to extract the interrupt for
COMMAND_RAISE_MSI_IRQ since it is now handled in common code.

Fixes: 3ecf3232c5 ("PCI: endpoint: Do not reset *command* inadvertently")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-20 13:56:06 -05:00