Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20210524115506.35724-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow specifying Vddd regulator/supply to be enabled on I2C probing.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210528105101.508254-4-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add specific init function to poke needed registers & values for this IC
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210528105101.508254-2-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The only use of the static and global snd_compress_ops structs is to
assign their address to the compress_ops field in the
snd_soc_component_driver struct which is a pointer to const. Make them
const to allow the compiler to put them in read-only memory.
Rikard Falkeborn (5):
ASoC: cs47125: Constify static struct snd_compress_ops
ASoC: wm5102: Constify static struct snd_compress_ops
ASoC: wm5110: Constify static struct snd_compress_ops
ASoC: qcom: q6asm-dai: Constify static struct snd_compress_ops
ASoC: SOF: Intel: Constify sof_probe_compressed_ops
sound/soc/codecs/cs47l24.c | 2 +-
sound/soc/codecs/wm5102.c | 2 +-
sound/soc/codecs/wm5110.c | 2 +-
sound/soc/qcom/qdsp6/q6asm-dai.c | 2 +-
sound/soc/sof/compress.c | 2 +-
sound/soc/sof/compress.h | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
--
2.31.1
Add PCI DID for Intel AlderLake-M.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210528184153.18251-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cl_dsp_init() dumps the ROM status if it fails after max
attempts before powering off the DSP. Remove the duplicate
log to print the ROM status and error in
hda_dsp_cl_boot_firmware(). These values are invalid anyway
as the DSP is already powered off.
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210528160551.10145-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the hda_dsp_dump() function to avoid duplicating
the ROM status and error.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210528160551.10145-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_RW() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210528063033.19904-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of sof_probe_compressed_ops is to assign its address to
the compress_ops field in the snd_soc_component_driver struct, which is
a pointer to const. The assignment is done in sound/soc/sof/pcm.c. Make
it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210526231013.46530-6-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_compress_ops structs are only stored in the compress_ops field
of a snd_soc_component_driver struct, so make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210526231013.46530-5-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_compress_ops structs are only stored in the compress_ops field
of a snd_soc_component_driver struct, so make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210526231013.46530-4-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_compress_ops structs are only stored in the compress_ops field
of a snd_soc_component_driver struct, so make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210526231013.46530-3-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_compress_ops structs are only stored in the compress_ops field
of a snd_soc_component_driver struct, so make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210526231013.46530-2-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In general Renesas SoC's SSI/SRC are all enabled, but some SoC is not.
H2 E2
SRC0 <=
SRC1 SRC1
SRC2 SRC2
... ...
Renesas Sound driver is assuming that *all* modules are
enabled, and thus it is using *data array* to access each modules.
Because of it, we have been using "status = disabled" at DT,
and using *full size* array but avoiding disabled module.
ex)
rcar_sound,src {
src-0 {
=> status = "disabled";
};
src1: src-1 {
...
};
...
But R-Car D3 have many disabled modules (It has SSI3/SSI4, SRC5/SRC6),
and Renesas SoC maintainer don't want above style on DT.
ex)
rcar_sound,src {
=> src0: src-0 { status = "disabled"; };
=> src1: src-1 { status = "disabled"; };
=> src2: src-2 { status = "disabled"; };
=> src3: src-3 { status = "disabled"; };
=> src4: src-4 { status = "disabled"; };
src5: src-5 {
...
};
src6: src-6 {
...
};
};
rcar_sound,ssi {
=> ssi0: ssi-0 { status = "disabled"; };
=> ssi1: ssi-1 { status = "disabled"; };
=> ssi2: ssi-2 { status = "disabled"; };
ssi3: ssi-3 {
...
};
ssi4: ssi-4 {
...
};
};
To adjust it, it needs to care about related for_each_child_of_node()
loop on rsnd driver, and it is used from...
> grep -l for_each_child_of_node sound/soc/sh/rcar/*
sound/soc/sh/rcar/core.c
sound/soc/sh/rcar/ctu.c
sound/soc/sh/rcar/dma.c
sound/soc/sh/rcar/dvc.c
sound/soc/sh/rcar/mix.c
sound/soc/sh/rcar/src.c
sound/soc/sh/rcar/ssi.c
sound/soc/sh/rcar/ssiu.c
This patch adjust to this situation.
By this patch, we can avoid disabled modules on DT
rcar_sound,src {
src5: src-5 {
...
};
src6: src-6 {
...
};
};
rcar_sound,ssi {
ssi3: ssi-3 {
...
};
ssi4: ssi-4 {
...
};
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yyzk017.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch tidyup rsnd_parse_connect_xxx() style.
Nothing is changed, but is preparation for
next "ASoC: rsnd: adjust disabled module" patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877djfk01l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds "char *name" to rsnd_dma_request_channel().
It is not yet used so far, but is preparation for
next "ASoC: rsnd: adjust disabled module" patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878s3vk01q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds "char *name" to rsnd_parse_connect_common().
It is not yet used so far, but is preparation for
next "ASoC: rsnd: adjust disabled module" patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6obk01v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
./sound/soc/fsl/imx-rpmsg.c:140:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Message-Id: <1622113652-56646-1-git-send-email-zou_wei@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_ssiu_busif_err_irq_ctrl() has very similar duplicated code.
This patch merge and tidyup the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87sg28lwxw.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_ssiu_busif_err_status_clear() has very similar duplicated code.
This patch merge and tidyup the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87tumolwy3.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
BUSIF is SSIU feature, but its related code is
implemented at ssi.c today.
This patch moves it to ssiu.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87v974lwy9.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas Sound uses many modules (SSI/SSIU/SRC/CTU/MIX/DVC/DMA),
and supports complex connections/path.
Thus each modules needs to save its status to correctly control it.
This status is updated when by .trigger, and .hw_params/.hw_free.
Renesas Sound is protecting modules by using lock when .trigger,
but it was not enough to protecting each modules "status" if it was
used from many paths.
1) .hw_params/.hw_free update status
2) another doesn't update status, but overwrites by same value
This patch do
1) protects .hw_params/.hw_free by lock
2) do nothing if no status update
Without this patch, protected mod->status (= .trigger) might be
overwrote by non protected mod->status (= .hw_params / .hw_free),
and in such case, CTU/MIX/DVC/SSIU/SSI which are used from
many paths might get damage.
If above issue happens, Renesas Sound will be hung (= silence)
and never be recoverd.
I could reproduce this issue by continue playing very short sound
with loop very long term (3-4 hours) through 2 inputs (= MIXer).
For updating rsnd_status_update(), this patch removes rsnd_dai_call()
debug message. Because we already have debugfs support, and is not
good match to new code.
Reported-by: Linh Phung T. Y <linh.phung.jy@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87wnrklwyh.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd supports #define DEBUG, but it is not helpful
if issue happen after 4-5 hours.
This patch adds debugfs support for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87y2c0lwyn.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd is using dev_dbg() if irq error happen,
but it makes debug very difficult if some strange things happen.
This patch uses dev_info() for it, and rename the macro name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <87zgwglwyv.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd_dai_call() doesn't indicate error message,
thus it is very difficult to know the issue
when strange things happen.
This patch indicates error for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <871r9snbji.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ssi.c checks BUSIF when TDM mode, but it should be checked
everytime.
This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <8735u8nbjr.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSIU is not needed if SSI was PIO mode.
This patch ignores such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <874keonbkg.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
runtime might be NULL. Let's ignore such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <875yz4nbkt.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit d6956a7dde ("ASoC: rsnd: add null CLOCKIN support")
added null_clk, but it is using local static valuable.
It will be leaked if rsnd driver was removed.
This patch moves it to priv, and call unregister when removing.
Fixes: d6956a7dde ("ASoC: rsnd: add null CLOCKIN support")
Link: https://lore.kernel.org/r/87tumsoe2p.wl-kuninori.morimoto.gx@renesas.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Message-Id: <877djknbl5.wl-kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_WO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-Id: <20210524114239.7960-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Revise variable names and comments in
cs35l35 and cs35l36 amp drivers.
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20210525194439.2232908-1-drhodes@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-Id: <20210524114017.18672-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_WO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-Id: <20210524114753.39544-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DEVICE_ATTR_WO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-Id: <20210524114503.26460-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The sparse tool complains as follows:
sound/soc/fsl/imx-card.c:121:27: warning:
symbol 'ak4458_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:138:31: warning:
symbol 'ak4458_tdm_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:149:27: warning:
symbol 'ak4497_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:166:27: warning:
symbol 'ak5558_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:180:31: warning:
symbol 'ak5558_tdm_fs_mul' was not declared. Should it be static?
Those symbols are not used outside of imx-card.c, so marks
them static.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20210524133553.2366502-1-weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Use DEVICE_ATTR_RW() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Message-Id: <20210524115131.46288-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Jack must be connected before reporting button events and
if the jack is disconnected button release must be reported
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-4-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Add support for 2.4MHz clock source
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-3-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Add support for 24bits, 2 channels, 48k Sample rate bit clock
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-2-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
The 16 Bits, 2 channels, 48K sample rate use case needs
to configure a safer pll_divout during the start of PLL
After 800us from the start of PLL the correct pll_divout
can be set
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-1-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Hi Mark, Rob
These adds R-Car D3 support for rsnd driver.
[1/3] is tidyup patch for dt-bindings (not only for D3).
[2/3], [3/3] are for R-Car D3.
Kuninori Morimoto (3):
ASoC: dt-bindings: renesas: rsnd: tidyup properties
ASoC: rsnd: tidyup loop on rsnd_adg_clk_query()
ASoC: rsnd: add null CLOCKIN support
.../bindings/sound/renesas,rsnd.yaml | 10 ++++-
sound/soc/sh/rcar/adg.c | 37 ++++++++++++++++---
2 files changed, 41 insertions(+), 6 deletions(-)
--
2.25.1
NXP's TFA98xx (now part of Goodix) are fairly popular speaker amplifiers
used in many smartphones and tablets. Most of them are sold as "smart
amplifiers" with built-in "CoolFlux DSP" that is used for volume control,
plus a "sophisticated speaker-boost and protection algorithm".
Unfortunately, they are also almost entirely undocumented. The short
datasheets (e.g. [1] for TFA9897) describe the available features,
but do not provide any information about the registers or how to use
the "CoolFlux DSP".
The amplifiers are most often configured through proprietary userspace
libraries. There are also some (rather complex) kernel drivers (e.g. [2])
but even those rely on obscure firmware blobs for configuration (so-called
"containers"). They seem to contain different "profiles" with tuned speaker
settings, sample rates and volume steps (which would be better exposed
as separate ALSA mixers).
The format of the firmware files seems to have changed a lot over the time,
so it's not even possible to simply re-use the firmware originally provided
by the vendor.
Overall, it seems close to impossible to develop a proper mainline driver
for these amplifiers that could make proper use of the built-in DSP.
This commit implements a compromise: At least the TFA1 family of the
TFA98xx amplifiers (usually called TFA989x) provide a way to *bypass*
the DSP using a special register sequence. The register sequence can be
found in similar variations in the kernel drivers from lots of vendors
e.g. in [3] and was probably mainly used for factory testing.
With the DSP bypassed, the amplifier acts mostly like a dumb standard
speaker amplifier, without (hardware) volume control. However, the setup
is much simpler and it works without any obscure firmware.
This driver implements the DSP bypass combined with chip-specific
initialization sequences adapted from [2]. Only TFA9895 is supported in
this initial commit. Except for the lack of volume control I can not hear
any difference with or without the DSP, it works just fine.
This driver allows the speaker to work on mainline Linux running on the
Samsung Galaxy A3/A5 (2015) [TFA9895] and Alcatel Idol 3 [TFA9897].
TFA9897 support will be added in separate patch set later.
[1]: https://product.goodix.com/en/docview/TFA9897%20SDS_Rev.3.1?objectId=47&objectType=document&version=78
[2]: https://source.codeaurora.org/external/mas/tfa98xx
[3]: 57b5050e34/sound/soc/codecs/tfa98xx.c (L1422-L1462)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210513104129.36583-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 06e8f5c842 ("ASoC: rsnd: don't call clk_get_rate() under
atomic context") used saved clk_rate, thus for_each_rsnd_clk()
is no longer needed. This patch fixes it.
Fixes: 06e8f5c842 ("ASoC: rsnd: don't call clk_get_rate() under atomic context")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v978oe2u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check the return value of devm_kstrdup() in case of
Null-point-dereference.
Fixes: 45dd9943fc ("ASoC: core: remove artificial component and DAI name constraint")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20210524024941.159952-1-wangkefeng.wang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Brya is another ADL-P product.
AlderLake has support for Bluetooth audio offload capability.
Enable the BT-offload quirk for ADL-P Brya and the Intel RVP.
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521155632.3736393-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
