Patch series "mm: convert numa balancing functions to use a folio", v2.
do_numa_pages() only handles non-compound pages, and only PMD-mapped THPs
are handled in do_huge_pmd_numa_page(). But a large, PTE-mapped folio
will be supported so let's convert more numa balancing functions to
use/take a folio in preparation for that, no functional change intended
for now.
This patch (of 6):
The new vm_normal_folio_pmd() wrapper is similar to vm_normal_folio(),
which allow them to completely replace the struct page variables with
struct folio variables.
Link: https://lkml.kernel.org/r/20230921074417.24004-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20230921074417.24004-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Simplify code pattern of 'folio->index + folio_nr_pages(folio)' by using
the existing helper folio_next_index() in filemap_map_pages().
Link: https://lkml.kernel.org/r/20230921081535.3398-1-duminjie@vivo.com
Signed-off-by: Minjie Du <duminjie@vivo.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current memory reclaim delay statistics only count the direct memory
reclaim of the task in do_try_to_free_pages(). In systems with NUMA open,
some tasks occasionally experience slower response times, but the total
count of reclaim does not increase, using ftrace can show that
node_reclaim has occurred.
The memory reclaim occurring in get_page_from_freelist() is also due to
heavy memory load. To get the impact of tasks in memory reclaim, this
patch adds the statistics of the memory reclaim delay statistics for
__node_reclaim().
Link: https://lkml.kernel.org/r/181C946095F0252B+7cc60eca-1abf-4502-aad3-ffd8ef89d910@ex.bilibili.com
Signed-off-by: Wen Yu Li <wenyuli@ex.bilibili.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: <wangyun@bilibili.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit b25806dcd3d5("mm: memcontrol: deprecate swapaccounting=0
mode") do_memsw_account() is synonymous with
!cgroup_subsys_on_dfl(memory_cgrp_subsys), It always equals true in
memcg1_stat_format(). Remove the unused code.
Link: https://lkml.kernel.org/r/20230915105845.3199656-3-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Tejun heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Expose swapcache stat for memcg v1", v2.
Since commit b603894248 ("mm: memcg: add swapcache stat for memcg v2")
adds swapcache stat for the cgroup v2, it seems there is no reason to hide
it in memcg v1. Conversely, with swapcached it is more accurate to
evaluate the available memory for memcg.
Link: https://lkml.kernel.org/r/20230915105845.3199656-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20230915105845.3199656-2-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
First found this typo as reviewing memory tier code. Fix it by sed like:
$ sed -i 's/sibiling/sibling/g' $(git grep -l sibiling)
so the acpi one will be corrected as well.
Link: https://lkml.kernel.org/r/20230802092856.819328-1-lizhijian@cn.fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current kernel only lock base size folio during mlock syscall.
Add large folio support with following rules:
- Only mlock large folio when it's in VM_LOCKED VMA range
and fully mapped to page table.
fully mapped folio is required as if folio is not fully
mapped to a VM_LOCKED VMA, if system is in memory pressure,
page reclaim is allowed to pick up this folio, split it
and reclaim the pages which are not in VM_LOCKED VMA.
- munlock will apply to the large folio which is in VMA range
or cross the VMA boundary.
This is required to handle the case that the large folio is
mlocked, later the VMA is split in the middle of large folio.
Link: https://lkml.kernel.org/r/20230918073318.1181104-4-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If large folio is in the range of VM_LOCKED VMA, it should be mlocked to
avoid being picked by page reclaim. Which may split the large folio and
then mlock each pages again.
Mlock this kind of large folio to prevent them being picked by page
reclaim.
For the large folio which cross the boundary of VM_LOCKED VMA or not fully
mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is
under memory pressure, this kind of large folio will be split and the
pages ouf of VM_LOCKED VMA can be reclaimed.
Ideally, for large folio, we should mlock it when the large folio is fully
mapped to VMA and munlock it if any page are unmampped from VMA. But it's
not easy to detect whether the large folio is fully mapped to VMA in some
cases (like add/remove rmap). So we update mlock_vma_folio() and
munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags.
Let caller to decide whether they should call these two functions.
For add rmap, only mlock normal 4K folio and postpone large folio handling
to page reclaim phase. It is possible to reuse page table iterator to
detect whether folio is fully mapped or not during page reclaim phase.
For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly
because rmap makes folio not fully mapped to VMA.
Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "support large folio for mlock", v3.
Yu mentioned at [1] about the mlock() can't be applied to large folio.
I leant the related code and here is my understanding:
- For RLIMIT_MEMLOCK related, there is no problem. Because the
RLIMIT_MEMLOCK statistics is not related underneath page. That means
underneath page mlock or munlock doesn't impact the RLIMIT_MEMLOCK
statistics collection which is always correct.
- For keeping the page in RAM, there is no problem either. At least,
during try_to_unmap_one(), once detect the VMA has VM_LOCKED bit set in
vm_flags, the folio will be kept whatever the folio is mlocked or not.
So the function of mlock for large folio works. But it's not optimized
because the page reclaim needs scan these large folio and may split them.
This series identified the large folio for mlock to four types:
- The large folio is in VM_LOCKED range and fully mapped to the
range
- The large folio is in the VM_LOCKED range but not fully mapped to
the range
- The large folio cross VM_LOCKED VMA boundary
- The large folio cross last level page table boundary
For the first type, we mlock large folio so page reclaim will skip it.
For the second/third type, we don't mlock large folio. As the pages not
mapped to VM_LOACKED range are mapped to none VM_LOCKED range, if system
is in memory pressure situation, the large folio can be picked by page
reclaim and split. Then the pages not mapped to VM_LOCKED range can be
reclaimed.
For the fourth type, we don't mlock large folio because locking one page
table lock can't prevent the part in another last level page table being
unmapped. Thanks to Ryan for pointing this out.
To check whether the folio is fully mapped to the range, PTEs needs be
checked to see whether the page of folio is associated. Which needs take
page table lock and is heavy operation. So far, the only place needs this
check is madvise and page reclaim. These functions already have their own
PTE iterator.
patch1 introduce API to check whether large folio is in VMA range.
patch2 make page reclaim/mlock_vma_folio/munlock_vma_folio support
large folio mlock/munlock.
patch3 make mlock/munlock syscall support large folio.
Yu also mentioned a race which can make folio unevictable after munlock
during RFC v2 discussion [3]:
We decided that race issue didn't block this series based on:
- That race issue was not introduced by this series
- We had a looks-ok fix for that race issue. Need to wait
for mlock_count fixing patch as Yosry Ahmed suggested [4]
[1] https://lore.kernel.org/linux-mm/CAOUHufbtNPkdktjt_5qM45GegVO-rCFOMkSh0HQminQ12zsV8Q@mail.gmail.com/
[2] https://lore.kernel.org/linux-mm/20230809061105.3369958-1-fengwei.yin@intel.com/
[3] https://lore.kernel.org/linux-mm/CAOUHufZ6=9P_=CAOQyw0xw-3q707q-1FVV09dBNDC-hpcpj2Pg@mail.gmail.com/
This patch (of 3):
folio_in_range() will be used to check whether the folio is mapped to
specific VMA and whether the mapping address of folio is in the range.
Also a helper function folio_within_vma() to check whether folio
is in the range of vma based on folio_in_range().
Link: https://lkml.kernel.org/r/20230918073318.1181104-1-fengwei.yin@intel.com
Link: https://lkml.kernel.org/r/20230918073318.1181104-2-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change to use new address space operation dirty_folio().
Link: https://lkml.kernel.org/r/20230917-trycontrib1-v1-1-db22630b8839@gmail.com
Fixes: 6f31a5a261 ("fs: Add aops->dirty_folio")
Signed-off-by: Jianguo Bau <roidinev@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update DAMON sysfs interface to support DAMOS apply intervals by adding a
new file, 'apply_interval_us' in each scheme directory. Users can set and
get the interval for each scheme in microseconds by writing to and reading
from the file.
Link: https://lkml.kernel.org/r/20230916020945.47296-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON-based operation schemes are applied for every aggregation interval.
That was mainly because schemes were using nr_accesses, which be complete
to be used for every aggregation interval. However, the schemes are now
using nr_accesses_bp, which is updated for each sampling interval in a way
that reasonable to be used. Therefore, there is no reason to apply
schemes for each aggregation interval.
The unnecessary alignment with aggregation interval was also making some
use cases of DAMOS tricky. Quotas setting under long aggregation interval
is one such example. Suppose the aggregation interval is ten seconds, and
there is a scheme having CPU quota 100ms per 1s. The scheme will actually
uses 100ms per ten seconds, since it cannobe be applied before next
aggregation interval. The feature is working as intended, but the results
might not that intuitive for some users. This could be fixed by updating
the quota to 1s per 10s. But, in the case, the CPU usage of DAMOS could
look like spikes, and would actually make a bad effect to other
CPU-sensitive workloads.
Implement a dedicated timing interval for each DAMON-based operation
scheme, namely apply_interval. The interval will be sampling interval
aligned, and each scheme will be applied for its apply_interval. The
interval is set to 0 by default, and it means the scheme should use the
aggregation interval instead. This avoids old users getting any
behavioral difference.
Link: https://lkml.kernel.org/r/20230916020945.47296-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface exposes access rate of each region via DAMOS tried
regions directory. For this, the nr_accesses field of the region is used.
DAMOS was actually using nr_accesses in the past, but it uses
nr_accesses_bp now. Use the value that it is really using as the source.
Note that this doesn't expose nr_accesses_bp as is (in basis point), but
after converting it to the natural number by dividing the value by 10,000.
Hence there is no behavioral change from users' perspective.
Link: https://lkml.kernel.org/r/20230916020945.47296-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: implement DAMOS apply intervals".
DAMON-based operation schemes are applied for every aggregation interval.
That is mainly because schemes are using nr_accesses, which be complete to
be used for every aggregation interval.
This makes some DAMOS use cases be tricky. Quota setting under long
aggregation interval is one such example. Suppose the aggregation
interval is ten seconds, and there is a scheme having CPU quota 100ms per
1s. The scheme will actually uses 100ms per ten seconds, since it cannobe
be applied before next aggregation interval. The feature is working as
intended, but the results might not that intuitive for some users. This
could be fixed by updating the quota to 1s per 10s. But, in the case, the
CPU usage of DAMOS could look like spikes, and actually make a bad effect
to other CPU-sensitive workloads.
Also, with such huge aggregation interval, users may want schemes to be
applied more frequently.
DAMON provides nr_accesses_bp, which is updated for each sampling interval
in a way that reasonable to be used. By using that instead of
nr_accesses, DAMOS can have its own time interval and mitigate abovely
mentioned issues.
This patchset makes DAMOS schemes to use nr_accesses_bp instead of
nr_accesses, and have their own timing intervals. Also update DAMOS tried
regions sysfs files and DAMOS before_apply tracepoint to use the new data
as their source. Note that the interval is zero by default, and it is
interpreted to use the aggregation interval instead. This avoids making
user-visible behavioral changes.
Patches Seuqeunce
-----------------
The first patch (patch 1/9) makes DAMOS uses nr_accesses_bp instead of
nr_accesses, and following two patches (patches 2/9 and 3/9) updates DAMON
sysfs interface for DAMOS tried regions and the DAMOS before_apply
tracespoint to use nr_accesses_bp instead of nr_accesses, respectively.
The following two patches (patches 4/9 and 5/9) implements the
scheme-specific apply interval for DAMON kernel API users and update the
design document for the new feature.
Finally, the following four patches (patches 6/9, 7/9, 8/9 and 9/9) add
support of the feature in DAMON sysfs interface, add a simple selftest
test case, and document the new file on the usage and the ABI documents,
repsectively.
This patch (of 9):
DAMON provides nr_accesses_bp, which becomes same to nr_accesses * 10000
for every aggregation interval, but updated every sampling interval with a
reasonable accuracy. Since DAMON-based operation schemes are applied in
every aggregation interval using nr_accesses, using nr_accesses_bp instead
will make no difference to users. Meanwhile, it allows DAMOS to apply the
schemes in a time interval that less than the aggregation interval. It
could be useful and more flexible for some cases. Do it.
Link: https://lkml.kernel.org/r/20230916020945.47296-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230916020945.47296-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the callers to expect a folio and remove the unnecesary conversion
back to a struct page.
Link: https://lkml.kernel.org/r/20230824141325.2704553-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Anything found on a linked list threaded through ->lru is guaranteed to be
a folio as the compound_head found in a tail page overlaps the ->lru
member of struct page. So we can pull folios directly off these lists no
matter whether pages or folios were added to the list.
Link: https://lkml.kernel.org/r/20230824141325.2704553-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Small hugetlb cleanups", v2.
Some trivial folio conversions
This patch (of 3):
update_and_free_hugetlb_folio puts the memory on hpage_freelist as a folio
so we can take it off the list as a folio.
Link: https://lkml.kernel.org/r/20230824141325.2704553-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230824141325.2704553-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The new boot flow when it comes to initialization of gigantic pages is as
follows:
- At boot time, for a gigantic page during __alloc_bootmem_hugepage, the
region after the first struct page is marked as noinit.
- This results in only the first struct page to be initialized in
reserve_bootmem_region. As the tail struct pages are not initialized at
this point, there can be a significant saving in boot time if HVO
succeeds later on.
- Later on in the boot, the head page is prepped and the first
HUGETLB_VMEMMAP_RESERVE_SIZE / sizeof(struct page) - 1 tail struct pages
are initialized.
- HVO is attempted. If it is not successful, then the rest of the tail
struct pages are initialized. If it is successful, no more tail struct
pages need to be initialized saving significant boot time.
The WARN_ON for increased ref count in gather_bootmem_prealloc was changed
to a VM_BUG_ON. This is OK as there should be no speculative references
this early in boot process. The VM_BUG_ON's are there just in case such
code is introduced.
[akpm@linux-foundation.org: make it nicer for 80 cols]
Link: https://lkml.kernel.org/r/20230913105401.519709-5-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For reserved memory regions marked with this flag, reserve_bootmem_region
is not called during memmap_init_reserved_pages. This can be used to
avoid struct page initialization for regions which won't need them, for
e.g. hugepages with Hugepage Vmemmap Optimization enabled.
Link: https://lkml.kernel.org/r/20230913105401.519709-4-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This allows setting flags to both memblock types and is in preparation for
setting flags (for e.g. to not initialize struct pages) on reserved
memory region.
[usama.arif@bytedance.com: add missing argument definition]
Link: https://lkml.kernel.org/r/20230918090657.220463-1-usama.arif@bytedance.com
Link: https://lkml.kernel.org/r/20230913105401.519709-3-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: hugetlb: Skip initialization of gigantic tail struct
pages if freed by HVO", v5.
This series moves the boot time initialization of tail struct pages of a
gigantic page to later on in the boot. Only the
HUGETLB_VMEMMAP_RESERVE_SIZE / sizeof(struct page) - 1 tail struct pages
are initialized at the start. If HVO is successful, then no more tail
struct pages need to be initialized. For a 1G hugepage, this series avoid
initialization of 262144 - 63 = 262081 struct pages per hugepage.
When tested on a 512G system (allocating 500 1G hugepages), the kexec-boot
times with DEFERRED_STRUCT_PAGE_INIT enabled are:
- with patches, HVO enabled: 1.32 seconds
- with patches, HVO disabled: 2.15 seconds
- without patches, HVO enabled: 3.90 seconds
- without patches, HVO disabled: 3.58 seconds
This represents an approximately 70% reduction in boot time and will
significantly reduce server downtime when using a large number of gigantic
pages.
This patch (of 4):
If tail page prep and initialization is skipped, then the "start" page
will not contain the correct nid. Use the nid from first vmemap page.
Link: https://lkml.kernel.org/r/20230913105401.519709-1-usama.arif@bytedance.com
Link: https://lkml.kernel.org/r/20230913105401.519709-2-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function is used by only mm/damon/core.c. Mark it as a static
function.
Link: https://lkml.kernel.org/r/20230915025251.72816-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_merge_regions_of(), which is called for each aggregation interval,
updates nr_accesses_bp to nr_accesses * 10000. However, nr_accesses_bp is
updated for each sampling interval via damon_moving_sum() using the
aggregation interval as the moving time window. And by the definition of
the algorithm, the value becomes same to discrete-window based sum for
each time window-aligned time. Hence, nr_accesses_bp will be same to
nr_accesses * 10000 for each aggregation interval without explicit update.
Remove the unnecessary update of nr_accesses_bp in
damon_merge_regions_of().
Link: https://lkml.kernel.org/r/20230915025251.72816-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let nr_accesses_bp be calculated as a pseudo-moving sum that updated for
every sampling interval, using damon_moving_sum(). This is assumed to be
useful for cases that the aggregation interval is set quite huge, but the
monivoting results need to be collected earlier than next aggregation
interval is passed.
Link: https://lkml.kernel.org/r/20230915025251.72816-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add yet another representation of the access rate of each region, namely
nr_accesses_bp. It is just same to the nr_accesses but represents the
value in basis point (1 in 10,000), and updated at once in every
aggregation interval. That is, moving_accesses_bp is just nr_accesses *
10000. This may seems useless at the moment. However, it will be useful
for representing less than one nr_accesses value that will be needed to
make moving sum-based nr_accesses.
Link: https://lkml.kernel.org/r/20230915025251.72816-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a simple unit test for the pseudo moving-sum function
(damon_moving_sum()).
Link: https://lkml.kernel.org/r/20230915025251.72816-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For values that continuously change, moving average or sum are good ways
to provide fast updates while handling temporal and errorneous variability
of the value. For example, the access rate counter (nr_accesses) is
calculated as a sum of the number of positive sampled access check results
that collected during a discrete time window (aggregation interval), and
hence it handles temporal and errorneous access check results, but
provides the update only for every aggregation interval. Using a moving
sum method for that could allow providing the value for every sampling
interval. That could be useful for getting monitoring results snapshot or
running DAMOS in fine-grained timing.
However, supporting the moving sum for cases that number of samples in the
time window is arbirary could impose high overhead, since the number of
past values that it needs to keep could be too high. The nr_accesses
would also be one of the cases. To mitigate the overhead, implement a
pseudo-moving sum function that only provides an estimated pseudo-moving
sum. It assumes there was no error in last discrete time window and
subtract constant portion of last discrete time window sum.
Note that the function is not strictly implementing the moving sum, but it
keeps a property of moving sum, which makes the value same to the
dsicrete-window based sum for each time window-aligned timing. Hence,
people collecting the value in the old timings would show no difference.
Link: https://lkml.kernel.org/r/20230915025251.72816-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When getting mm_struct of the monitoring target process fails, there wil
be no need to increase the access rate counter (nr_accesses) of the
regions for the process. Hence, damon_va_check_accesses() skips calling
damon_update_region_access_rate() in the case. This breaks the assumption
that damon_update_region_access_rate() is called for every region, for
every sampling interval. Call the function for every region even in the
case. This might increase the overhead in some cases, but such case would
not be frequent, so no significant impact is really expected.
Link: https://lkml.kernel.org/r/20230915025251.72816-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: provide pseudo-moving sum based access rate".
DAMON checks the access to each region for every sampling interval,
increase the access rate counter of the region, namely nr_accesses, if the
access was made. For every aggregation interval, the counter is reset.
The counter is exposed to users to be used as a metric showing the
relative access rate (frequency) of each region. In other words, DAMON
provides access rate of each region in every aggregation interval. The
aggregation avoids temporal access pattern changes making things
confusing. However, this also makes a few DAMON-related operations to
unnecessarily need to be aligned to the aggregation interval. This can
restrict the flexibility of DAMON applications, especially when the
aggregation interval is huge.
To provide the monitoring results in finer-grained timing while keeping
handling of temporal access pattern change, this patchset implements a
pseudo-moving sum based access rate metric. It is pseudo-moving sum
because strict moving sum implementation would need to keep all values for
last time window, and that could incur high overhead of there could be
arbitrary number of values in a time window. Especially in case of the
nr_accesses, since the sampling interval and aggregation interval can
arbitrarily set and the past values should be maintained for every region,
it could be risky. The pseudo-moving sum assumes there were no temporal
access pattern change in last discrete time window to remove the needs for
keeping the list of the last time window values. As a result, it beocmes
not strict moving sum implementation, but provides a reasonable accuracy.
Also, it keeps an important property of the moving sum. That is, the
moving sum becomes same to discrete-window based sum at the time that
aligns to the time window. This means using the pseudo moving sum based
nr_accesses makes no change to users who shows the value for every
aggregation interval.
Patches Sequence
----------------
The sequence of the patches is as follows. The first four patches are for
preparation of the change. The first two (patches 1 and 2) implements a
helper function for nr_accesses update and eliminate corner case that
skips use of the function, respectively. Following two (patches 3 and 4)
respectively implement the pseudo-moving sum function and its simple unit
test case.
Two patches for making DAMON to use the pseudo-moving sum follow. The
fifthe one (patch 5) introduces a new field for representing the
pseudo-moving sum-based access rate of each region, and the sixth one
makes the new representation to actually updated with the pseudo-moving
sum function.
Last two patches (patches 7 and 8) makes followup fixes for skipping
unnecessary updates and marking the moving sum function as static,
respectively.
This patch (of 8):
Each DAMON operarions set is updating nr_accesses field of each
damon_region for each of their access check results, from the
check_accesses() callback. Directly accessing the field could make things
complex to manage and change in future. Define and use a dedicated
function for the purpose.
Link: https://lkml.kernel.org/r/20230915025251.72816-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230915025251.72816-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sleeps for sampling interval after each sampling, and check if the
aggregation interval and the ops update interval have passed using
ktime_get_coarse_ts64() and baseline timestamps for the intervals. That
design is for making the operations occur at deterministic timing
regardless of the time that spend for each work. However, it turned out
it is not that useful, and incur not-that-intuitive results.
After all, timer functions, and especially sleep functions that DAMON uses
to wait for specific timing, are not necessarily strictly accurate. It is
legal design, so no problem. However, depending on such inaccuracies, the
nr_accesses can be larger than aggregation interval divided by sampling
interval. For example, with the default setting (5 ms sampling interval
and 100 ms aggregation interval) we frequently show regions having
nr_accesses larger than 20. Also, if the execution of a DAMOS scheme
takes a long time, next aggregation could happen before enough number of
samples are collected. This is not what usual users would intuitively
expect.
Since access check sampling is the smallest unit work of DAMON, using the
number of passed sampling intervals as the DAMON-internal timer can easily
avoid these problems. That is, convert aggregation and ops update
intervals to numbers of sampling intervals that need to be passed before
those operations be executed, count the number of passed sampling
intervals, and invoke the operations as soon as the specific amount of
sampling intervals passed. Make the change.
Note that this could make a behavioral change to settings that using
intervals that not aligned by the sampling interval. For example, if the
sampling interval is 5 ms and the aggregation interval is 12 ms, DAMON
effectively uses 15 ms as its aggregation interval, because it checks
whether the aggregation interval after sleeping the sampling interval.
This change will make DAMON to effectively use 10 ms as aggregation
interval, since it uses 'aggregation interval / sampling interval *
sampling interval' as the effective aggregation interval, and we don't use
floating point types. Usual users would have used aligned intervals, so
this behavioral change is not expected to make any meaningful impact, so
just make this change.
Link: https://lkml.kernel.org/r/20230914021523.60649-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use pfn calculation to
handle it properly.
Without the fix, a wrong number of page might be skipped. Since skip cannot be
negative, scan_movable_page() will end early and might miss a movable page with
-ENOENT. This might fail offline_pages(). No bug is reported. The fix comes
from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-4-zi.yan@sent.com
Fixes: eeb0efd071 ("mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use nth_page() to handle
it properly.
A wrong or non-existing page might be tried to be grabbed, either
leading to a non freeable page or kernel memory access errors. No bug
is reported. It comes from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-3-zi.yan@sent.com
Fixes: 57a196a584 ("hugetlb: simplify hugetlb handling in follow_page_mask")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Use nth_page() in place of direct struct page manipulation",
v3.
On SPARSEMEM without VMEMMAP, struct page is not guaranteed to be
contiguous, since each memory section's memmap might be allocated
independently. hugetlb pages can go beyond a memory section size, thus
direct struct page manipulation on hugetlb pages/subpages might give wrong
struct page. Kernel provides nth_page() to do the manipulation properly.
Use that whenever code can see hugetlb pages.
This patch (of 5):
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use nth_page() to handle
it properly.
Without the fix, page_kasan_tag_reset() could reset wrong page tags,
causing a wrong kasan result. No related bug is reported. The fix
comes from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20230913201248.452081-2-zi.yan@sent.com
Fixes: 2813b9c029 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This isolate_mode_t flag is effectively unused since 89f6c88a6a ("mm:
__isolate_lru_page_prepare() in isolate_migratepages_block()") as
sc->may_unmap is now checked directly (and only node_reclaim has a mode
that sets it to 0). The last remaining place is mm_vmscan_lru_isolate
tracepoint for the isolate_mode parameter. That one was mainly used to
indicate the active/inactive mode, which the trace-vmscan-postprocess.pl
script consumed, but that got silently broken. After fixing the script by
the previous patch, it does not need the isolate_mode anymore. So just
remove the parameter and with that the whole ISOLATE_UNMAPPED flag.
Link: https://lkml.kernel.org/r/20230914131637.12204-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: add a tracepoint for damos apply target regions",
v2.
DAMON provides damon_aggregated tracepoint to let users record full
monitoring results. Sometimes, users need to record monitoring results of
specific pattern. DAMOS tried regions directory of DAMON sysfs interface
allows it, but the interface is mainly designed for snapshots and
therefore would be inefficient for such recording. Implement yet another
tracepoint for efficient support of the usecase.
This patch (of 2):
DAMON provides damon_aggregated tracepoint, which exposes details of each
region and its access monitoring results. It is useful for getting whole
monitoring results, e.g., for recording purposes.
For investigations of DAMOS, DAMON Sysfs interface provides DAMOS
statistics and tried_regions directory. But, those provides only
statistics and snapshots. If the scheme is frequently applied and if the
user needs to know every detail of DAMOS behavior, the snapshot-based
interface could be insufficient and expensive.
As a last resort, userspace users need to record the all monitoring
results via damon_aggregated tracepoint and simulate how DAMOS would
worked. It is unnecessarily complicated. DAMON kernel API users,
meanwhile, can do that easily via before_damos_apply() callback field of
'struct damon_callback', though.
Add a tracepoint that will be called just after before_damos_apply()
callback for more convenient investigations of DAMOS. The tracepoint
exposes all details about each regions, similar to damon_aggregated
tracepoint.
Please note that DAMOS is currently not only for memory management but
also for query-like efficient monitoring results retrievals (when 'stat'
action is used). Until now, only statistics or snapshots were supported.
Addition of this tracepoint allows efficient full recording of DAMOS-based
filtered monitoring results.
Link: https://lkml.kernel.org/r/20230913022050.2109-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230913022050.2109-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [tracing]
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Directly check the return of isolate_hugetlb() and folio_isolate_lru() to
remove isolated variable, also setup err = -EBUSY in advance before
isolation, and update err only when successfully queued for migration,
which could help us to unify and simplify code a bit.
Link: https://lkml.kernel.org/r/20230913095131.2426871-9-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is some different between hugeTLB and THP behave when passed the
address of a tail page, for THP, it will migrate the entire THP page, but
for HugeTLB, it will return -EACCES, or -ENOENT before commit e66f17ff71
("mm/hugetlb: take page table lock in follow_huge_pmd()"),
-EACCES The page is mapped by multiple processes and can be moved
only if MPOL_MF_MOVE_ALL is specified.
-ENOENT The page is not present.
But when check manual[1], both of the two errnos are not suitable, it is
better to keep the same behave between hugetlb and THP when passed the
address of a tail page, so let's just remove the PageHead() check for
HugeTLB.
[1] https://man7.org/linux/man-pages/man2/move_pages.2.html
Link: https://lkml.kernel.org/r/20230913095131.2426871-8-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use a folio in add_page_for_migration() to save compound_head() calls.
Link: https://lkml.kernel.org/r/20230913095131.2426871-7-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use __folio_test_movable(), no need to convert from folio to page again.
Link: https://lkml.kernel.org/r/20230913095131.2426871-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
At present, numa balance only support base page and PMD-mapped THP, but we
will expand to support to migrate large folio/pte-mapped THP in the
future, it is better to make migrate_misplaced_page() to take a folio
instead of a page, and rename it to migrate_misplaced_folio(), it is a
preparation, also this remove several compound_head() calls.
Link: https://lkml.kernel.org/r/20230913095131.2426871-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename numamigrate_isolate_page() to numamigrate_isolate_folio(), then
make it takes a folio and use folio API to save compound_head() calls.
Link: https://lkml.kernel.org/r/20230913095131.2426871-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The check of THP mapped by multiple processes was introduced by commit
04fa5d6a65 ("mm: migrate: check page_count of THP before migrating") and
refactor by commit 340ef3902c ("mm: numa: cleanup flow of transhuge page
migration"), which is out of date, since migrate_misplaced_page() is now
using the standard migrate_pages() for small pages and THPs, the reference
count checking is in folio_migrate_mapping(), so let's remove the special
check for THP.
Link: https://lkml.kernel.org/r/20230913095131.2426871-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: migrate: more folio conversion and unification", v3.
Convert more migrate functions to use a folio, it is also a preparation
for large folio migration support when balancing numa.
This patch (of 8):
The assert VM_BUG_ON_PAGE(order && !PageTransHuge(page), page) is not very
useful,
1) for a tail/base page, order = 0, for a head page, the order > 0 &&
PageTransHuge() is true
2) there is a PageCompound() check and only base page is handled in
do_numa_page(), and do_huge_pmd_numa_page() only handle PMD-mapped
THP
3) even though the page is a tail page, isolate_lru_page() will post
a warning, and fail to isolate the page
4) if large folio/pte-mapped THP migration supported in the future,
we could migrate the entire folio if numa fault on a tail page
so just remove the check.
Link: https://lkml.kernel.org/r/20230913095131.2426871-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20230913095131.2426871-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's pass a folio; we are always mapping the entire thing.
Link: https://lkml.kernel.org/r/20230913125113.313322-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's sanity-check PageAnonExclusive vs. mapcount in page_add_anon_rmap()
and hugepage_add_anon_rmap() after setting PageAnonExclusive simply by
re-reading the mapcounts.
We can stop initializing the "first" variable in page_add_anon_rmap() and
no longer need an atomic_inc_and_test() in hugepage_add_anon_rmap().
While at it, switch to VM_WARN_ON_FOLIO().
[david@redhat.com: update check for doubly-mapped page]
Link: https://lkml.kernel.org/r/d8e5a093-2e22-c14b-7e64-6da280398d9f@redhat.com
Link: https://lkml.kernel.org/r/20230913125113.313322-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If swapin code would ever decide to not use order-0 pages and supply a
PTE-mapped large folio, we will have to change how we call
__folio_set_anon() -- eventually with exclusive=false and an adjusted
address. For now, let's add a VM_WARN_ON_FOLIO() with a comment about the
situation.
Link: https://lkml.kernel.org/r/20230913125113.313322-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's handle it in the caller; no need for the "first" check based on the
mapcount.
We really only end up with !anon pages in page_add_anon_rmap() via
do_swap_page(), where we hold the folio lock. So races are not possible.
Add a VM_WARN_ON_FOLIO() to make sure that we really hold the folio lock.
In the future, we might want to let do_swap_page() use
folio_add_new_anon_rmap() on new pages instead: however, we might have to
pass then whether the folio is exclusive or not. So keep it in there for
now.
For hugetlb we never expect to have a non-anon page in
hugepage_add_anon_rmap(). Remove that code, along with some other checks
that are either not required or were checked in
hugepage_add_new_anon_rmap() already.
Link: https://lkml.kernel.org/r/20230913125113.313322-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's handle it in the caller. No need to pass the page. While at it,
rename the function to __folio_set_anon() and pass "bool exclusive"
instead of "int exclusive".
Link: https://lkml.kernel.org/r/20230913125113.313322-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang