Commit Graph

55 Commits

Author SHA1 Message Date
Jeff Layton ebce3eb2f7 ceph: fix inode number handling on arches with 32-bit ino_t
Tuan and Ulrich mentioned that they were hitting a problem on s390x,
which has a 32-bit ino_t value, even though it's a 64-bit arch (for
historical reasons).

I think the current handling of inode numbers in the ceph driver is
wrong. It tries to use 32-bit inode numbers on 32-bit arches, but that's
actually not a problem. 32-bit arches can deal with 64-bit inode numbers
just fine when userland code is compiled with LFS support (the common
case these days).

What we really want to do is just use 64-bit numbers everywhere, unless
someone has mounted with the ino32 mount option. In that case, we want
to ensure that we hash the inode number down to something that will fit
in 32 bits before presenting the value to userland.

Add new helper functions that do this, and only do the conversion before
presenting these values to userland in getattr and readdir.

The inode table hashvalue is changed to just cast the inode number to
unsigned long, as low-order bits are the most likely to vary anyway.

While it's not strictly required, we do want to put something in
inode->i_ino. Instead of basing it on BITS_PER_LONG, however, base it on
the size of the ino_t type.

NOTE: This is a user-visible change on 32-bit arches:

1/ inode numbers will be seen to have changed between kernel versions.
   32-bit arches will see large inode numbers now instead of the hashed
   ones they saw before.

2/ any really old software not built with LFS support may start failing
   stat() calls with -EOVERFLOW on inode numbers >2^32. Nothing much we
   can do about these, but hopefully the intersection of people running
   such code on ceph will be very small.

The workaround for both problems is to mount with "-o ino32".

[ idryomov: changelog tweak ]

URL: https://tracker.ceph.com/issues/46828
Reported-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Reported-and-Tested-by: Tuan Hoang1 <Tuan.Hoang1@ibm.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-24 17:25:26 +02:00
Colin Ian King 2c81ef286c ceph: remove redundant initialization of variable mds
The variable mds is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-03 11:05:28 +02:00
Xiubo Li 4f1d756def ceph: add global total_caps to count the mdsc's total caps number
This will help to reduce using the global mdsc->mutex lock in many
places.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-08-03 11:05:15 +02:00
Xiubo Li 70c948206f ceph: add metadata perf metric support
Add a new "r_ended" field to struct ceph_mds_request and use that to
maintain the average latency of MDS requests.

URL: https://tracker.ceph.com/issues/43215
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-06-01 13:22:51 +02:00
Xiubo Li 97e27aaa9a ceph: add read/write latency metric support
Calculate the latency for OSD read requests. Add a new r_end_stamp
field to struct ceph_osd_request that will hold the time of that
the reply was received. Use that to calculate the RTT for each call,
and divide the sum of those by number of calls to get averate RTT.

Keep a tally of RTT for OSD writes and number of calls to track average
latency of OSD writes.

URL: https://tracker.ceph.com/issues/43215
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-06-01 13:22:51 +02:00
Xiubo Li 1af16d547f ceph: add caps perf metric for each superblock
Count hits and misses in the caps cache. If the client has all of
the necessary caps when a task needs references, then it's counted
as a hit. Any other situation is a miss.

URL: https://tracker.ceph.com/issues/43215
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-06-01 13:22:51 +02:00
Xiubo Li f9009efac4 ceph: add dentry lease metric support
For dentry leases, only count the hit/miss info triggered from the vfs
calls. For the cases like request reply handling and ceph_trim_dentries,
ignore them.

For now, these are only viewable using debugfs. Future patches will
allow the client to send the stats to the MDS.

The output looks like:

item          total           miss            hit
-------------------------------------------------
d_lease       11              7               141

URL: https://tracker.ceph.com/issues/43215
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-06-01 13:22:51 +02:00
Yufen Yu d51cfc53ad bdi: use bdi_dev_name() to get device name
Use the common interface bdi_dev_name() to get device name.

Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Add missing <linux/backing-dev.h> include BFQ

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:07:39 -06:00
Ilya Dryomov 072eaf3c0f libceph: drop CEPH_DEFINE_SHOW_FUNC
Although CEPH_DEFINE_SHOW_FUNC is much older, it now duplicates
DEFINE_SHOW_ATTRIBUTE from linux/seq_file.h.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-03-30 12:42:40 +02:00
Xiubo Li b38c9eb475 ceph: add possible_max_rank and make the code more readable
The m_num_mds here is actually the number for MDSs which are in
up:active status, and it will be duplicated to m_num_active_mds,
so remove it.

Add possible_max_rank to the mdsmap struct and this will be
the correctly possible largest rank boundary.

Remove the special case for one mds in __mdsmap_get_random_mds(),
because the validate mds rank may not always be 0.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-01-27 16:53:40 +01:00
Jeff Layton 3a3430affc ceph: show tasks waiting on caps in debugfs caps file
Add some visibility of tasks that are waiting for caps to the "caps"
debugfs file. Display the tgid of the waiting task, inode number, and
the caps the task needs and wants.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-12-09 20:55:10 +01:00
John Hubbard 3e8730fac9 ceph: don't return a value from void function
This fixes a build warning to that effect.

Fixes: 1a829ff2a6 ("ceph: no need to check return value of debugfs_create functions")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:25 +02:00
Linus Torvalds d9b9c89304 Lots of exciting things this time!
- support for rbd object-map and fast-diff features (myself).  This
   will speed up reads, discards and things like snap diffs on sparse
   images.
 
 - ceph.snap.btime vxattr to expose snapshot creation time (David
   Disseldorp).  This will be used to integrate with "Restore Previous
   Versions" feature added in Windows 7 for folks who reexport ceph
   through SMB.
 
 - security xattrs for ceph (Zheng Yan).  Only selinux is supported
   for now due to the limitations of ->dentry_init_security().
 
 - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
   Layton).  This is actually a single feature bit which was missing
   because of the filesystem pieces.  With this in, the kernel client
   will finally be reported as "luminous" by "ceph features" -- it is
   still being reported as "jewel" even though all required Luminous
   features were implemented in 4.13.
 
 - stop NULL-terminating ceph vxattrs (Jeff Layton).  The convention
   with xattrs is to not terminate and this was causing inconsistencies
   with ceph-fuse.
 
 - change filesystem time granularity from 1 us to 1 ns, again fixing
   an inconsistency with ceph-fuse (Luis Henriques).
 
 On top of this there are some additional dentry name handling and cap
 flushing fixes from Zheng.  Finally, Jeff is formally taking over for
 Zheng as the filesystem maintainer.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl0u+X8THGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi9byB/9fIxzoxtDMvixtJabuGSJRtlijDlWF
 GlO6yIWCXl/8v8easR2PCF75U/xv0+QFQmze8PVi8u4Xz589P247NnEuyEZ9n84i
 aCavARho6QLZPEL+B04NaqoHBl+ORKQTA6eKGhyKwRp/rn83z5Ubuw2tN7krHT3b
 kCY61FuTQGxNY2o/WKv/iLwINYr7H23hCf0WwyyKH1bp7OegiQ14Ebn1NtfS3sMx
 hS6h8Ya826vmUW0bCSS/9kzKYBCjksTig0HphUOHq6BoZJs++0b7GukIulRyuLfD
 J9Gr9HGPoDCVzdmFfpn2FSlxdmqfO9amUSagd0ftLQfFlPlrpoULi0GW
 =Bgxr
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "Lots of exciting things this time!

   - support for rbd object-map and fast-diff features (myself). This
     will speed up reads, discards and things like snap diffs on sparse
     images.

   - ceph.snap.btime vxattr to expose snapshot creation time (David
     Disseldorp). This will be used to integrate with "Restore Previous
     Versions" feature added in Windows 7 for folks who reexport ceph
     through SMB.

   - security xattrs for ceph (Zheng Yan). Only selinux is supported for
     now due to the limitations of ->dentry_init_security().

   - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
     Layton). This is actually a single feature bit which was missing
     because of the filesystem pieces. With this in, the kernel client
     will finally be reported as "luminous" by "ceph features" -- it is
     still being reported as "jewel" even though all required Luminous
     features were implemented in 4.13.

   - stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
     with xattrs is to not terminate and this was causing
     inconsistencies with ceph-fuse.

   - change filesystem time granularity from 1 us to 1 ns, again fixing
     an inconsistency with ceph-fuse (Luis Henriques).

  On top of this there are some additional dentry name handling and cap
  flushing fixes from Zheng. Finally, Jeff is formally taking over for
  Zheng as the filesystem maintainer"

* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
  ceph: fix end offset in truncate_inode_pages_range call
  ceph: use generic_delete_inode() for ->drop_inode
  ceph: use ceph_evict_inode to cleanup inode's resource
  ceph: initialize superblock s_time_gran to 1
  MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
  rbd: setallochint only if object doesn't exist
  rbd: support for object-map and fast-diff
  rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
  libceph: export osd_req_op_data() macro
  libceph: change ceph_osdc_call() to take page vector for response
  libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
  rbd: new exclusive lock wait/wake code
  rbd: quiescing lock should wait for image requests
  rbd: lock should be quiesced on reacquire
  rbd: introduce copyup state machine
  rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
  rbd: move OSD request allocation into object request state machines
  rbd: factor out __rbd_osd_setup_discard_ops()
  rbd: factor out rbd_osd_setup_copyup()
  rbd: introduce obj_req->osd_reqs list
  ...
2019-07-18 11:05:25 -07:00
Dan Carpenter 13c41737b9 ceph: silence a checker warning in mdsc_show()
The problem is that if ceph_mdsc_build_path() fails then we set "path"
to NULL and the "pathlen" variable is uninitialized.  Then we call
ceph_mdsc_free_path(path, pathlen) to clean up.  Since "path" is NULL,
the function is a no-op but Smatch and UBSan still complain that
"pathlen" is uninitialized.

This patch doesn't change run time, it just silence the warnings.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08 14:01:40 +02:00
Greg Kroah-Hartman 1a829ff2a6 ceph: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

This cleanup allows the return value of the functions to be made void,
as no logic should care if these files succeed or not.

Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Sage Weil <sage@redhat.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612145538.GA18772@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03 16:57:18 +02:00
Jeff Layton b726ec972c libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer
GCC9 is throwing a lot of warnings about unaligned accesses by
callers of ceph_pr_addr. All of the current callers are passing a
pointer to the sockaddr inside struct ceph_entity_addr.

Fix it to take a pointer to a struct ceph_entity_addr instead,
and then have the function make a copy of the sockaddr before
printing it.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07 19:43:05 +02:00
Jeff Layton f77f21bb28 ceph: use __getname/__putname in ceph_mdsc_build_path
Al suggested we get rid of the kmalloc here and just use __getname
and __putname to get a full PATH_MAX pathname buffer.

Since we build the path in reverse, we continue to return a pointer
to the beginning of the string and the length, and add a new helper
to free the thing at the end.

Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07 19:22:37 +02:00
Jeff Layton ff4a80bf2d ceph: dump granular cap info in "caps" debugfs file
We have a "caps" file already that gives statistics on the caps
cache as a whole. Add another section to that output and dump a
line for each individual cap record.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07 19:22:37 +02:00
Yan, Zheng 8d9c0906ac ceph: remove dentry_lru file from debugfs
The file shows all dentries in cephfs mount. It's not very useful.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:17 +01:00
Chengguang Xu 11e1478df9 libceph, ceph: change permission for readonly debugfs entries
Remove write permission for debugfs entries which only have readonly
function.

Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 10:12:45 +02:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Markus Elfring d37b1d9943 ceph: adjust 36 checks for NULL pointers
The script “checkpatch.pl” pointed information out like the following.

Comparison to NULL could be written ...

Thus fix the affected source code places.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06 19:56:52 +02:00
Linus Torvalds 26c5eaa132 The two main items are support for disabling automatic rbd exclusive
lock transfers from myself and the long awaited -ENOSPC handling series
 from Jeff.  The former will allow rbd users to take advantage of
 exclusive lock's built-in blacklist/break-lock functionality while
 staying in control of who owns the lock.  With the latter in place, we
 will abort filesystem writes on -ENOSPC instead of having them block
 indefinitely.
 
 Beyond that we've got the usual pile of filesystem fixes from Zheng,
 some refcount_t conversion patches from Elena and a patch for an
 ancient open() flags handling bug from Alexander.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJZEt/kAAoJEEp/3jgCEfOLpzAIAIld0N06DuHKG2F9mHEnLeGl
 Y60BZ3Ajo32i9qPT/u9ntI99ZMlkuHcNWg6WpCCh8umbwk2eiAKRP/KcfGcWmmp9
 EHj9COCmBR9TRM1pNS1lSMzljDnxf9sQmbIO9cwMQBUya5g19O0OpApzxF1YQhCR
 V9B/FYV5IXELC3b/NH45oeDAD9oy/WgwbhQ2feTBQJmzIVJx+Je9hdhR1PH1rI06
 ysyg3VujnUi/hoDhvPTBznNOxnHx/HQEecHH8b01MkbaCgxPH88jsUK/h7PYF3Gh
 DE/sCN69HXeu1D/al3zKoZdahsJ5GWkj9Q+vvBoQJm+ZPsndC+qpgSj761n9v38=
 =vamy
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The two main items are support for disabling automatic rbd exclusive
  lock transfers from myself and the long awaited -ENOSPC handling
  series from Jeff.

  The former will allow rbd users to take advantage of exclusive lock's
  built-in blacklist/break-lock functionality while staying in control
  of who owns the lock. With the latter in place, we will abort
  filesystem writes on -ENOSPC instead of having them block
  indefinitely.

  Beyond that we've got the usual pile of filesystem fixes from Zheng,
  some refcount_t conversion patches from Elena and a patch for an
  ancient open() flags handling bug from Alexander"

* tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client: (31 commits)
  ceph: fix memory leak in __ceph_setxattr()
  ceph: fix file open flags on ppc64
  ceph: choose readdir frag based on previous readdir reply
  rbd: exclusive map option
  rbd: return ResponseMessage result from rbd_handle_request_lock()
  rbd: kill rbd_is_lock_supported()
  rbd: support updating the lock cookie without releasing the lock
  rbd: store lock cookie
  rbd: ignore unlock errors
  rbd: fix error handling around rbd_init_disk()
  rbd: move rbd_unregister_watch() call into rbd_dev_image_release()
  rbd: move rbd_dev_destroy() call out of rbd_dev_image_release()
  ceph: when seeing write errors on an inode, switch to sync writes
  Revert "ceph: SetPageError() for writeback pages if writepages fails"
  ceph: handle epoch barriers in cap messages
  libceph: add an epoch_barrier field to struct ceph_osd_client
  libceph: abort already submitted but abortable requests when map or pool goes full
  libceph: allow requests to return immediately on full conditions if caller wishes
  libceph: remove req->r_replay_version
  ceph: make seeky readdir more efficient
  ...
2017-05-10 08:42:33 -07:00
Yan, Zheng 76201b6354 ceph: allow connecting to mds whose rank >= mdsmap::m_max_mds
mdsmap::m_max_mds is the expected count of active mds. It's not the
max rank of active mds. User can decrease mdsmap::m_max_mds, but does
not stop mds whose rank >= mdsmap::m_max_mds.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-05-04 09:19:20 +02:00
Jan Kara 09dc9fc24b ceph: Convert to separately allocated bdi
Allocate struct backing_dev_info separately instead of embedding it
inside client structure. This unifies handling of bdi among users.

CC: Ilya Dryomov <idryomov@gmail.com>
CC: "Yan, Zheng" <zyan@redhat.com>
CC: Sage Weil <sage@redhat.com>
CC: ceph-devel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 12:09:55 -06:00
Jeff Layton bc2de10dc4 ceph: convert bools in ceph_mds_request to a new r_req_flags field
Currently, we have a bunch of bool flags in struct ceph_mds_request. We
need more flags though, but each bool takes (at least) a byte. Those
add up over time.

Merge all of the existing bools in this struct into a single unsigned
long, and use the set/test/clear_bit macros to manipulate them. These
are atomic operations, but that is required here to prevent
load/modify/store races. The existing flags are protected by different
locks, so we can't rely on them for that purpose.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-02-20 12:16:08 +01:00
Yan, Zheng aeda081c5e ceph: don't show symlink target in debugfs/mdsc
symlink target is useless for debug and can be very long. It's annoying
to show it in debugfs/mdsc.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-26 01:15:32 +02:00
David Howells 2b0143b5c9 VFS: normal filesystems (and lustre): d_inode() annotations
that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
Al Viro a455589f18 assorted conversions to %p[dD]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-19 13:01:20 -05:00
John Spray 14ed97033d ceph: additional debugfs output
MDS session state and client global ID is
useful instrumentation when testing.

Signed-off-by: John Spray <john.spray@redhat.com>
2014-10-14 12:57:01 -07:00
Fabian Frederick 3364d113c8 fs/ceph/debugfs.c: replace seq_printf by seq_puts
Replace seq_printf where possible.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:06 -07:00
Yan, Zheng c137a32a40 ceph: print inode number for LOOKUPINO request
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-03 10:33:54 +08:00
Sage Weil 844d87c332 ceph: do not assume r_old_dentry[_dir] always set together
Do not assume that r_old_dentry implies that r_old_dentry_dir is also
true.  Separate out the ref cleanup and make the debugs dump behave when
it is NULL.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-03 10:33:53 +08:00
Sage Weil d1c338a509 libceph: delay debugfs initialization until we learn global_id
The debugfs directory includes the cluster fsid and our unique global_id.
We need to delay the initialization of the debug entry until we have
learned both the fsid and our global_id from the monitor or else the
second client can't create its debugfs entry and will fail (and multiple
client instances aren't properly reflected in debugfs).

Reported by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-08-20 10:03:15 -07:00
Sage Weil 41b02e1f9b ceph: explicitly reference rename old_dentry parent dir in request
We carry a pin on the parent directory for the rename source and dest
dentries.  For the source it's r_locked_dir; we need to explicitly
reference the old_dentry parent as well, since the dentry's d_parent may
change between when the request was created and pinned and when it is
freed.

Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 11:31:14 -07:00
Sage Weil 21f3b5f1bb ceph: remove debugfs debug cruft
Whoops!

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-21 12:24:20 -07:00
Sage Weil 4af25fdda6 ceph: drop redundant r_mds field
The r_mds field is redundant, since we can find the same information at
r_session->s_mds, and when r_session is NULL then r_mds is meaningless.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-12 15:15:13 -08:00
Randy Dunlap 6f453ed6c0 ceph: fix debugfs warnings
Include "super.h" outside of CONFIG_DEBUG_FS to eliminate a compiler warning:

fs/ceph/debugfs.c:266: warning: 'struct ceph_fs_client' declared inside parameter list
fs/ceph/debugfs.c:266: warning: its scope is only this definition or declaration, which is probably not what you want
fs/ceph/debugfs.c:271: warning: 'struct ceph_fs_client' declared inside parameter list

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20 15:38:21 -07:00
Yehuda Sadeh 3d14c5d2b6 ceph: factor out libceph from Ceph file system
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph.  This
is mostly a matter of moving files around.  However, a few key pieces
of the interface change as well:

 - ceph_client becomes ceph_fs_client and ceph_client, where the latter
   captures the mon and osd clients, and the fs_client gets the mds client
   and file system specific pieces.
 - Mount option parsing and debugfs setup is correspondingly broken into
   two pieces.
 - The mon client gets a generic handler callback for otherwise unknown
   messages (mds map, in this case).
 - The basic supported/required feature bits can be expanded (and are by
   ceph_fs_client).

No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:37:28 -07:00
Dan Carpenter f44c3890d9 ceph: ceph_mdsc_build_path() returns an ERR_PTR
ceph_mdsc_build_path() returns an ERR_PTR but this code is set up to
handle NULL returns.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26 09:24:28 -07:00
Sage Weil 213c99ee0c ceph: whitespace cleanup
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-03 10:25:11 -07:00
Sage Weil a8b763a9b3 ceph: use %pU to print uuid (fsid)
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-01 20:11:42 -07:00
Yehuda Sadeh bfaf148eb2 ceph: fix caps debugfs entry
The ceph client structure was not set correctly.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-24 09:47:36 -07:00
Yehuda Sadeh f8c76f6f25 ceph: make mon client statfs handling more generic
This is being done so that we could reuse the statfs
infrastructure with other requests that return values.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:33 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Sage Weil 4fc51be8fa ceph: use rbtree for pg pools; decode new osdmap format
Since we can now create and destroy pg pools, the pool ids will be sparse,
and an array no longer makes sense for looking up by pool id.  Use an
rbtree instead.

The OSDMap encoding also no longer has a max pool count (previously used to
allocate the array).  There is a new pool_max, that is the largest pool id
we've ever used, although we don't actually need it in the client.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 10:02:49 -08:00
Sage Weil 85ccce43a3 ceph: clean up readdir caps reservation
Use a global counter for the minimum number of allocated caps instead of
hard coding a check against readdir_max.  This takes into account multiple
client instances, and avoids examining the superblock mount options when a
cap is dropped.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-17 10:02:43 -08:00
Sage Weil 85ff03f6bf ceph: use rbtree for mon statfs requests
An rbtree is lighter weight, particularly given we will generally have
very few in-flight statfs requests.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 22:01:10 -08:00
Sage Weil 44ca18f268 ceph: use rbtree for mds requests
The rbtree is a more appropriate data structure than a radix_tree.  It
avoids extra memory usage and simplifies the code.

It also fixes a bug where the debugfs 'mdsc' file wasn't including the
most recent mds request.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 22:01:08 -08:00
Sage Weil 7740a42f81 ceph: display pgid in debugfs osd request dump
Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-14 12:23:39 -08:00