The commit 9f91f22aaf ("drm/msm/dsi: remove duplicate fields from
dsi_pll_Nnm instances") mistakenly changed registered clock names. While
the platform is in progress of migration to using clock properties in
the dts rather than the global clock names, we should provide backwards
compatibility. Thus restore registerd global clock names.
Fixes: 9f91f22aaf ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20210921162245.1858118-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Both PINGPONG4 and PINGPONG5 IRQ registers are using the
same address, which is incorrect. PINGPONG4 should use the
register offset 30, and PINGPONG5 should use the register
offset 31 according to the downstream driver.
Fixes: 667e9985ee ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210819133636.2045766-1-robert.foss@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since commit 98659487b8 ("drm/msm: add support to take dpu snapshot")
the following NULL pointer dereference is seen on i.MX53:
[ 3.275493] msm msm: bound 30000000.gpu (ops a3xx_ops)
[ 3.287174] [drm] Initialized msm 1.8.0 20130625 for msm on minor 0
[ 3.293915] 8<--- cut here ---
[ 3.297012] Unable to handle kernel NULL pointer dereference at virtual address 00000028
[ 3.305244] pgd = (ptrval)
[ 3.307989] [00000028] *pgd=00000000
[ 3.311624] Internal error: Oops: 805 [#1] SMP ARM
[ 3.316430] Modules linked in:
[ 3.319503] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+g682d702b426b #1
[ 3.326652] Hardware name: Freescale i.MX53 (Device Tree Support)
[ 3.332754] PC is at __mutex_init+0x14/0x54
[ 3.336969] LR is at msm_disp_snapshot_init+0x24/0xa0
i.MX53 does not use the DPU controller.
Fix the problem by only calling msm_disp_snapshot_init() on platforms that
use the DPU controller.
Cc: stable@vger.kernel.org
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210914174831.2044420-1-festevam@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
These error paths returned 1 on failure, instead of a negative error
code. This would lead to an Oops in the caller. A second problem is
that the check for "if (ret != -ENODATA)" did not work because "ret" was
set to 1.
Fixes: 5785dd7a8e ("drm/msm: Fix duplicate gpu node in icc summary")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211001125904.GK2283@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
This code returns 1 on error instead of a negative error. It leads to
an Oops in the caller. A second problem is that the check for
"if (ret != -ENODATA)" cannot be true because "ret" is set to 1.
Fixes: 5785dd7a8e ("drm/msm: Fix duplicate gpu node in icc summary")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211001125759.GJ2283@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
The initialization of pointer dev dereferences pointer edp before
edp is null checked, so there is a potential null pointer deference
issue. Fix this by only dereferencing edp after edp has been null
checked.
Addresses-Coverity: ("Dereference before null check")
Fixes: ab5b0107cc ("drm/msm: Initial add eDP support in msm drm driver (v5)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210929121857.213922-1-colin.king@canonical.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The return type of ktime_divns() is s64. The timeout_to_jiffies() currently
assigns the result of this ktime_divns() to unsigned long, which on 32 bit
systems may overflow. Furthermore, the result of this function is sometimes
also passed to functions which expect signed long, dma_fence_wait_timeout()
is one such example.
Fix this by adjusting the type of remaining_jiffies to s64, so we do not
suffer overflow there, and return a value limited to range of 0..INT_MAX,
which is safe for all usecases of this timeout.
The above overflow can be triggered if userspace passes in too large timeout
value, larger than INT_MAX / HZ seconds. The kernel detects it and complains
about "schedule_timeout: wrong timeout value %lx" and generates a warning
backtrace.
Note that this fixes commit 6cedb8b377 ("drm/msm: avoid using 'timespec'"),
because the previously used timespec_to_jiffies() function returned unsigned
long instead of s64:
static inline unsigned long timespec_to_jiffies(const struct timespec *value)
Fixes: 6cedb8b377 ("drm/msm: avoid using 'timespec'")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: stable@vger.kernel.org # 5.6+
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210917005913.157379-1-marex@denx.de
Signed-off-by: Rob Clark <robdclark@chromium.org>
There is no devfreq on a3xx at the moment since gpu_busy is not
implemented. This means that msm_devfreq_init() will return early
and the entire devfreq setup is skipped.
However, msm_devfreq_active() and msm_devfreq_idle() are still called
unconditionally later, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
Internal error: Oops: 96000004 [#1] PREEMPT SMP
CPU: 0 PID: 133 Comm: ring0 Not tainted 5.15.0-rc1 #4
Hardware name: Longcheer L8150 (DT)
pc : mutex_lock_io+0x2bc/0x2f0
lr : msm_devfreq_active+0x3c/0xe0 [msm]
Call trace:
mutex_lock_io+0x2bc/0x2f0
msm_gpu_submit+0x164/0x180 [msm]
msm_job_run+0x54/0xe0 [msm]
drm_sched_main+0x2b0/0x4a0 [gpu_sched]
kthread+0x154/0x160
ret_from_fork+0x10/0x20
Fix this by adding a check in msm_devfreq_active/idle() which ensures
that devfreq was actually initialized earlier.
Fixes: 9bc9557017 ("drm/msm: Devfreq tuning")
Reported-by: Nikita Travkin <nikita@trvn.ru>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210913164556.16284-1-stephan@gerhold.net
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently there is audio not working problem after system resume from suspend
if hdmi monitor stay plugged in at DUT. However this problem does not happen
at normal operation but at a particular test case. The root cause is DP driver
signal audio with connected state at resume which trigger audio trying to setup
audio data path through DP main link but failed due to display port is not setup
and enabled by upper layer framework yet. This patch only have DP driver signal
audio only when DP is in disconnected state so that audio option shows correct
state after system resume. DP driver will not signal audio with connected state
until display enabled executed by upper layer framework where display port is
setup completed and main link is running.
Changes in V2:
-- add details commit text
Fixes: afc9b8b6ba ("drm/msm/dp: signal audio plugged change at dp_pm_resume")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1632932224-25102-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
This KUnit fixes update for Linux 5.15-rc6 consists of:
- Fixes to address the structleak plugin causing the stack frame size
to grow immensely when used with KUnit. Fixes include adding a new
makefile to disable structleak and using it from KUnit iio, device
property, thunderbolt, and bitfield tests to disable it.
- KUnit framework reference count leak in kfree_at_end
- KUnit tool fix to resolve conflict between --json and --raw_output
and generate correct test output in either case.
- kernel-doc warnings due to mismatched arg names
-----BEGIN PGP SIGNATURE-----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=08Ra
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
- Fixes to address the structleak plugin causing the stack frame size
to grow immensely when used with KUnit. Fixes include adding a new
makefile to disable structleak and using it from KUnit iio, device
property, thunderbolt, and bitfield tests to disable it.
- KUnit framework reference count leak in kfree_at_end
- KUnit tool fix to resolve conflict between --json and --raw_output
and generate correct test output in either case.
- kernel-doc warnings due to mismatched arg names
* tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix kernel-doc warnings due to mismatched arg names
bitfield: build kunit tests without structleak plugin
thunderbolt: build kunit tests without structleak plugin
device property: build kunit tests without structleak plugin
iio/test-format: build kunit tests without structleak plugin
gcc-plugins/structleak: add makefile var for disabling structleak
kunit: fix reference count leak in kfree_at_end
kunit: tool: better handling of quasi-bool args (--json, --raw_output)
Pull cgroup fixes from Tejun Heo:
"All documentation / comment updates"
* 'for-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroupv2, docs: fix misinformation in "device controller" section
cgroup/cpuset: Change references of cpuset_mutex to cpuset_rwsem
docs/cgroup: remove some duplicate words
This reverts commit f4be17cd5b.
Commit c1ec54b7b5
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:
WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0
So revert that patch and all the patches depend on that patch.
Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This reverts commit 8cdcb36534.
Commit c1ec54b7b5
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:
WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0
So revert that patch and all the patches depend on that patch.
Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This reverts commit bc9241be73.
Commit c1ec54b7b5
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:
WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0
So revert that patch and all the patches depend on that patch.
Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This reverts commit 9efb16c2fd.
Commit c1ec54b7b5
("drm/mediatek: Use mailbox rx_callback instead of cmdq_task_cb")
would cause numerous mtk cmdq mailbox driver warning:
WARNING: CPU: 0 PID: 0 at drivers/mailbox/mtk-cmdq-mailbox.c:198
cmdq_task_exec_done+0xb8/0xe0
So revert that patch and all the patches depend on that patch.
Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo Serra <eballetbo@gmail.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Pull workqueue fixes from Tejun Heo:
"One patch to add a missing __printf annotation and the other to enable
deferred printing for debug dumps to avoid deadlocks when triggered
from some contexts (e.g. console drivers)"
* 'for-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix state-dump console deadlock
workqueue: annotate alloc_workqueue() as printf
-----BEGIN PGP SIGNATURE-----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=u3qV
-----END PGP SIGNATURE-----
Merge tag 'for-5.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more error handling fixes, stemming from code inspection, error
injection or fuzzing"
* tag 'for-5.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix abort logic in btrfs_replace_file_extents
btrfs: check for error when looking up inode during dir entry replay
btrfs: unify lookup return value when dir entry is missing
btrfs: deal with errors when adding inode reference during log replay
btrfs: deal with errors when replaying dir entry during log replay
btrfs: deal with errors when checking if a dir entry exists during log replay
btrfs: update refs for any root except tree log roots
btrfs: unlock newly allocated extent buffer after error
For non-4K PAGE_SIZE configs, the largest gigantic huge page size is
CONT_PMD_SHIFT order. On arm64 with 64K PAGE_SIZE, the gigantic page is
16G. Therefore, one should be able to specify 'hugetlb_cma=16G' on the
kernel command line so that one gigantic page can be allocated from CMA.
However, when adding such an option the following message is produced:
hugetlb_cma: cma area should be at least 8796093022208 MiB
This is because the calculation for non-4K gigantic page order is
incorrect in the arm64 specific routine arm64_hugetlb_cma_reserve().
Fixes: abb7962adc ("arm64/hugetlb: Reserve CMA areas for gigantic pages on 16K and 64K configs")
Cc: <stable@vger.kernel.org> # 5.9.x
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20211005202529.213812-1-mike.kravetz@oracle.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This Kconfig option was added initially so that memory encryption is
enabled by default on machines which support it.
However, devices which have DMA masks that are less than the bit
position of the encryption bit, aka C-bit, require the use of an IOMMU
or the use of SWIOTLB.
If the IOMMU is disabled or in passthrough mode, the kernel would switch
to SWIOTLB bounce-buffering for those transfers.
In order to avoid that,
2cc13bb4f5 ("iommu: Disable passthrough mode when SME is active")
disables the default IOMMU passthrough mode so that devices for which the
default 256K DMA is insufficient, can use the IOMMU instead.
However 2, there are cases where the IOMMU is disabled in the BIOS, etc.
(think the usual hardware folk "oops, I dropped the ball there" cases) or a
driver doesn't properly use the DMA APIs or a device has a firmware or
hardware bug, e.g.:
ea68573d40 ("drm/amdgpu: Fail to load on RAVEN if SME is active")
However 3, in the above GPU use case, there are APIs like Vulkan and
some OpenGL/OpenCL extensions which are under the assumption that
user-allocated memory can be passed in to the kernel driver and both the
GPU and CPU can do coherent and concurrent access to the same memory.
That cannot work with SWIOTLB bounce buffers, of course.
So, in order for those devices to function, drop the "default y" for the
SME by default active option so that users who want to have SME enabled,
will need to either enable it in their config or use "mem_encrypt=on" on
the kernel command line.
[ tlendacky: Generalize commit message. ]
Fixes: 7744ccdbc1 ("x86/mm: Add Secure Memory Encryption (SME) support")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/8bbacd0e-4580-3194-19d2-a0ecad7df09c@molgen.mpg.de
Console drivers often queue work while holding locks also taken in their
console write paths, something which can lead to deadlocks on SMP when
dumping workqueue state (e.g. sysrq-t or on suspend failures).
For serial console drivers this could look like:
CPU0 CPU1
---- ----
show_workqueue_state();
lock(&pool->lock); <IRQ>
lock(&port->lock);
schedule_work();
lock(&pool->lock);
printk();
lock(console_owner);
lock(&port->lock);
where workqueues are, for example, used to push data to the line
discipline, process break signals and handle modem-status changes. Line
disciplines and serdev drivers can also queue work on write-wakeup
notifications, etc.
Reworking every console driver to avoid queuing work while holding locks
also taken in their write paths would complicate drivers and is neither
desirable or feasible.
Instead use the deferred-printk mechanism to avoid printing while
holding pool locks when dumping workqueue state.
Note that there are a few WARN_ON() assertions in the workqueue code
which could potentially also trigger a deadlock. Hopefully the ongoing
printk rework will provide a general solution for this eventually.
This was originally reported after a lockdep splat when executing
sysrq-t with the imx serial driver.
Fixes: 3494fc3084 ("workqueue: dump workqueues on sysrq-t")
Cc: stable@vger.kernel.org # 4.0
Reported-by: Fabio Estevam <festevam@denx.de>
Tested-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Change argument from void* to struct REPARSE_DATA_BUFFER*
We copy data to buffer, so we can read it later in ntfs_read_mft.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Now ntfs_utf16_to_nls takes length as one of arguments.
If length of symlink > 255, then we tried to convert
length of symlink +- some random number.
Now 255 symbols limit was removed.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Seems to fix some object-debug splat which appeared while debugging
something unrelated.
v2: s/guc_blocked/guc_state.blocked/
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 62eaf0ae21 ("drm/i915/guc: Support request cancellation")
Link: https://patchwork.freedesktop.org/patch/msgid/20210924144646.4096402-1-matthew.auld@intel.com
(cherry picked from commit d576b31bde)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In ntfs_init_fs_context we allocate memory in fc->s_fs_info.
In case of failed mount we must free it in ntfs_fill_super.
We can't do it in ntfs_fs_free, because ntfs_fs_free called
with fc->s_fs_info == NULL.
fc->s_fs_info became NULL in sget_fc.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Michael Forney reported an incorrect padding type that was defined in
the commit 80fe7430c7 ("ALSA: add new 32-bit layout for
snd_pcm_mmap_status/control") for PCM control mmap data.
His analysis is correct, and this caused the misplacements of PCM
control data on 32bit arch and 32bit compat mode.
The bug is that the __pad2 definition in __snd_pcm_mmap_control64
struct was wrongly with __pad_before_uframe, which should have been
__pad_after_uframe instead. This struct is used in SYNC_PTR ioctl and
control mmap. Basically this bug leads to two problems:
- The offset of avail_min field becomes wrong, it's placed right after
appl_ptr without padding on little-endian
- When appl_ptr and avail_min are read as 64bit values in kernel side,
the values become either zero or corrupted (mixed up)
One good news is that, because both user-space and kernel
misunderstand the wrong offset, at least, 32bit application running on
32bit kernel works as is. Also, 64bit applications are unaffected
because the padding size is zero. The remaining problem is the 32bit
compat mode; as mentioned in the above, avail_min is placed right
after appl_ptr on little-endian archs, 64bit kernel reads bogus values
for appl_ptr updates, which may lead to streaming bugs like jumping,
XRUN or whatever unexpected.
(However, we haven't heard any serious bug reports due to this over
years, so practically seen, it's fairly safe to assume that the impact
by this bug is limited.)
Ideally speaking, we should correct the wrong mmap status control
definition. But this would cause again incompatibility with the
existing binaries, and fixing it (e.g. by renumbering ioctls) would be
really messy.
So, as of this patch, we only correct the behavior of 32bit compat
mode and keep the rest as is. Namely, the SYNC_PTR ioctl is now
handled differently in compat mode to read/write the 32bit values at
the right offsets. The control mmap of 32bit apps on 64bit kernels
has been already disabled (which is likely rather an overlook, but
this worked fine at this time :), so covering SYNC_PTR ioctl should
suffice as a fallback.
Fixes: 80fe7430c7 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control")
Reported-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/29QBMJU8DE71E.2YZSH8IHT5HMH@mforney.org
Link: https://lore.kernel.org/r/20211010075546.23220-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Before we haven't kept prealloc for sparse files because we thought that
it will speed up create / write operations.
It lead to situation, when user reserved some space for sparse file,
filled volume, and wasn't able to write in reserved file.
With this commit we keep prealloc.
Now xfstest generic/274 pass.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
SAR information from BIOS may come in non sequential pattern.
To overcome the issue, a check is made to extract the right SAR
information using the device mode which is currently being used.
Remove .owner field if calls are used which set it automatically.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Shravan S <s.shravan@intel.com>
Link: https://lore.kernel.org/r/20211006073525.1332925-1-s.shravan@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The int3472-discrete driver can enter an error path after initialising
int3472->clock.ena_gpio, but before it has registered the clock. This will
cause a NULL pointer dereference, because clkdev_drop() is not null aware.
Instead of guarding the call to skl_int3472_unregister_clock() by checking
for .ena_gpio, check specifically for the presence of the clk_lookup, which
will guarantee clkdev_create() has already been called.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214453
Fixes: 7540599a5e ("platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()")
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20211008224608.415949-1-djrscally@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The comment decribing the IPC timeout hadn't been updated when the
actual timeout was changed from 3 to 5 seconds in
commit a7d53dbbc7 ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") .
Since the value is anyway updated to 10s now, take this opportunity to
update the value in the comment too.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit a7d53dbbc7 ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") states that the recommended timeout range
is 5-10 seconds. Adjust the timeout value to the higher of those i.e 10
seconds, to account for situations where the 5 seconds is insufficient
for disconnect command success.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-3-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The macro IPC_TIMEOUT is already in jiffies (it is also used like that
elsewhere in the file when calling wait_for_completion_timeout()). Don’t
convert it using helper functions for the purposes of calculating the
busy loop expiry time.
Fixes: e7b7ab3847 (“platform/x86: intel_scu_ipc: Sleeping is fine when polling”)
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-2-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
DELL_WMI_PRIVACY is a feature toggle for the main dell-wmi driver,
so it must depend on the Kconfig option which enables the main
dell-wmi driver.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211011132338.407571-1-hdegoede@redhat.com
Fix shift argument for function rol32(). It should be provided in bits,
while was provided in bytes.
Fixes: 86148190a7 ("platform/mellanox: mlxreg-io: Add support for complex attributes")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210927142214.2613929-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Change kstrtou32() argument 'base' to be zero instead of 'len'.
It works by chance for setting one bit value, but it is not supposed to
work in case value passed to mlxreg_io_attr_store() is greater than 1.
It works for example, for:
echo 1 > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable
But it will fail for:
echo n > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable,
where n > 1.
The flow for input buffer conversion is as below:
_kstrtoull(const char *s, unsigned int base, unsigned long long *res)
calls:
rv = _parse_integer(s, base, &_res);
For the second case, where n > 1:
- _parse_integer() converts 's' to 'val'.
For n=2, 'len' is set to 2 (string buffer is 0x32 0x0a), for n=3
'len' is set to 3 (string buffer 0x33 0x0a), etcetera.
- 'base' is equal or greater then '2' (length of input buffer).
As a result, _parse_integer() exits with result zero (rv):
rv = 0;
while (1) {
...
if (val >= base)-> (2 >= 2)
break;
...
rv++;
...
}
And _kstrtoull() in their turn will fail:
if (rv == 0)
return -EINVAL;
Fixes: 5ec4a8ace0 ("platform/mellanox: Introduce support for Mellanox register access driver")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210927142214.2613929-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Intermittent Kernel crash has been observed on probe in
bcm_qspi_mspi_l2_isr() handler when the MSPI spifie interrupt bit
has not been cleared before registering for interrupts.
Fix the driver to move SoC specific custom interrupt handling code
before we register IRQ in probe. Also clear MSPI interrupt status
resgiter prior to registering IRQ handlers.
Fixes: cc20a38612 ("spi: iproc-qspi: Add Broadcom iProc SoCs support")
Signed-off-by: Kamal Dasu <kdasu@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211008203603.40915-3-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Couple of fixes addressing issues when FFA driver is build as a module.
One adds the device unregistration which was missing and causes issue
when loading the module second time after unloading once. Another one
adds the missing remove callback on the ffa bus which was missing due
to which modules depending on FFA(e.g. OPTEE) will fail to remove the
device and faults next time that module is loaded again.
-----BEGIN PGP SIGNATURE-----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=m1dF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dDfV
-----END PGP SIGNATURE-----
Merge tag 'ffa-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A driver fixes for v5.15
Couple of fixes addressing issues when FFA driver is build as a module.
One adds the device unregistration which was missing and causes issue
when loading the module second time after unloading once. Another one
adds the missing remove callback on the ffa bus which was missing due
to which modules depending on FFA(e.g. OPTEE) will fail to remove the
device and faults next time that module is loaded again.
* tag 'ffa-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix __ffa_devices_unregister
firmware: arm_ffa: Add missing remove callback to ffa_bus_type
Link: https://lore.kernel.org/r/20211006153231.4061789-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host
Controller.
Before this patch streaming video from USB cam made mouse and keyboard
connected to the same USB bus unusable. Also video was jerky.
With this patch streaming video doesn't have any effect on other
periferals and video is smooth.
Cc: stable@vger.kernel.org
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The command ring pointer is located at [6:63] bits of the command
ring control register (CRCR). All the control bits like command stop,
abort are located at [0:3] bits. While aborting a command, we read the
CRCR and set the abort bit and write to the CRCR. The read will always
give command ring pointer as all zeros. So we essentially write only
the control bits. Since we split the 64 bit write into two 32 bit writes,
there is a possibility of xHC command ring stopped before the upper
dword (all zeros) is written. If that happens, xHC updates the upper
dword of its internal command ring pointer with all zeros. Next time,
when the command ring is restarted, we see xHC memory access failures.
Fix this issue by only writing to the lower dword of CRCR where all
control bits are located.
Cc: stable@vger.kernel.org
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to allocate resources before registering the tty device to
avoid having a racing open() and write() fail to enable rx or
dereference a NULL pointer when accessing the uninitialised fifo.
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Cc: stable@vger.kernel.org # 4.16
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Seen on a VLI VL805 PCIe to USB controller. For non-stream endpoints
at least, if the xHC halts on a particular TRB due to an error then
the DCS field in the Out Endpoint Context maintained by the hardware
is not updated with the current cycle state.
Using the quirk XHCI_EP_CTX_BROKEN_DCS and instead fetch the DCS bit
from the TRB that the xHC stopped on.
[ bjorn: rebased to v5.14-rc2 ]
Link: https://github.com/raspberrypi/linux/issues/3060
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
