When building with a version of GCC prior to 8.x, there is an error
around non-constant initializer elements:
drivers/power/supply/bq24190_charger.c:1978:16: error: initializer element is not constant
.vbus_desc = bq24190_vbus_desc,
^~~~~~~~~~~~~~~~~
drivers/power/supply/bq24190_charger.c:1978:16: note: (near initialization for 'bq24190_chip_info_tbl[0].vbus_desc')
drivers/power/supply/bq24190_charger.c:1989:16: error: initializer element is not constant
.vbus_desc = bq24190_vbus_desc,
^~~~~~~~~~~~~~~~~
drivers/power/supply/bq24190_charger.c:1989:16: note: (near initialization for 'bq24190_chip_info_tbl[1].vbus_desc')
drivers/power/supply/bq24190_charger.c:2000:16: error: initializer element is not constant
.vbus_desc = bq24190_vbus_desc,
^~~~~~~~~~~~~~~~~
drivers/power/supply/bq24190_charger.c:2000:16: note: (near initialization for 'bq24190_chip_info_tbl[2].vbus_desc')
drivers/power/supply/bq24190_charger.c:2011:16: error: initializer element is not constant
.vbus_desc = bq24190_vbus_desc,
^~~~~~~~~~~~~~~~~
drivers/power/supply/bq24190_charger.c:2011:16: note: (near initialization for 'bq24190_chip_info_tbl[3].vbus_desc')
drivers/power/supply/bq24190_charger.c:2022:16: error: initializer element is not constant
.vbus_desc = bq24296_vbus_desc,
^~~~~~~~~~~~~~~~~
drivers/power/supply/bq24190_charger.c:2022:16: note: (near initialization for 'bq24190_chip_info_tbl[4].vbus_desc')
Clang versions prior to 17.x show a similar error:
drivers/power/supply/bq24190_charger.c:1978:16: error: initializer element is not a compile-time constant
.vbus_desc = bq24190_vbus_desc,
^~~~~~~~~~~~~~~~~
1 error generated.
Newer compilers have decided to accept these structures as compile time
constants as an extension. To resolve this issue for all supported
compilers, change the vbus_desc member in 'struct bq24190_chip_info' to
a pointer, as it is only ever passed by reference anyways, and adjust
the assignments accordingly.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1973
Fixes: b150a703b5 ("power: supply: bq24190_charger: Add support for BQ24296")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240103-fix-bq24190_charger-vbus_desc-non-const-v1-1-115ddf798c70@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The BQ24296 is most similar to the BQ24196, but the:
1. OTG config is split from CHG config (REG01)
2. ICHG (Fast Charge Current limit) range is smaller (<=3008mA)
3. NTC fault is simplified to 2 bits
Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
Link: https://lore.kernel.org/r/20231208034708.1248389-3-Hermes.Zhang@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently, a not-yet-entirely-initialized battmgr (e.g. with pd-mapper
not having yet started or ADSP not being up etc.) results in a couple of
zombie power supply devices hanging around.
This is particularly noticeable when trying to suspend the device (even
s2idle): the PSY-internal thermal zone is inaccessible and returns
-ENODEV, which causes log spam.
Register the power supplies only after we received some notification
indicating battmgr is ready to take off.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231218-topic-battmgr_fixture_attempt-v1-1-6145745f34fe@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
devm_kasprintf and devm_kzalloc return a pointer to dynamically
allocated memory which can be NULL upon failure.
Fixes: 8648aeb5d7 ("power: supply: add Qualcomm PMI8998 SMB2 Charger driver")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20231124075021.1335289-1-chentao@kylinos.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When building with clang, there are two section mismatch warnings:
WARNING: modpost: vmlinux: section mismatch in reference: at91_poweroff_probe+0x7c (section: .text) -> at91_wakeup_status (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: at91_shdwc_probe+0xcc (section: .text) -> at91_wakeup_status (section: .init.text)
Drop '__init' from at91_wakeup_status() to clear up the mismatch.
Fixes: dde74a5de8 ("power: reset: at91-sama5d2_shdwc: Stop using module_platform_driver_probe()")
Fixes: 099806de68 ("power: reset: at91-poweroff: Stop using module_platform_driver_probe()")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This resolves checkpatch warning "quoted string split across lines" on:
1640: WARNING: quoted string split across lines
1641: WARNING: quoted string split across lines
The motive to use multiple MODULE_AUTHOR statements came from this
comment from "include/linux/module.h":
/*
* Author(s), use "Name <email>" or just "Name", for multiple
* authors use multiple MODULE_AUTHOR() statements/lines.
*/
#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
These were mentioned by checkpatch:
Errors:
(1) code indent should use tabs where possible
(2) switch and case should be at the same indent
Warnings:
(1) Missing a blank line after declarations
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe error
path and eliminate need for explicit remove function.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
smatch complains that there is a buffer overflow and clang complains
'ret' is never read.
Smatch error:
drivers/power/supply/bq256xx_charger.c:1578 bq256xx_hw_init() error:
buffer overflow 'bq256xx_watchdog_time' 4 <= 4
Clang static checker:
Value stored to 'ret' is never read.
Add check for buffer overflow and error code from regmap_update_bits().
Fixes: 32e4978bb9 ("power: supply: bq256xx: Introduce the BQ256XX charger driver")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231116041822.1378758-1-suhui@nfschina.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
RRT_ALRT register holds remaining battery time in minutes therefore it
needs to be scaled accordingly when exposing TIME_TO_EMPTY via sysfs
expressed in seconds
Fixes: b4c7715c10 ("power: supply: add CellWise cw2015 fuel gauge driver")
Signed-off-by: Jan Palus <jpalus@fastmail.com>
Link: https://lore.kernel.org/r/20231111221704.5579-1-jpalus@fastmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20231105094712.3706799-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20231105094712.3706799-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Returning an error if unregister_restart_handler() failed has no effect
but triggering another error message. So converting this driver to
.remove_new() has no effect but to suppress the duplicated error message.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231104211501.3676352-30-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231104211501.3676352-29-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231104211501.3676352-28-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231104211501.3676352-27-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231104211501.3676352-26-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231104211501.3676352-25-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231104211501.3676352-24-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231104211501.3676352-23-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231104211501.3676352-22-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20231104211501.3676352-21-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231104211501.3676352-20-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and so slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __ref which is
needed to suppress a (W=1) modpost warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20231104211501.3676352-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and so slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __ref which is
needed to suppress a (W=1) modpost warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20231104211501.3676352-18-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and so slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __ref which is
needed to suppress a (W=1) modpost warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20231104211501.3676352-17-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This driver uses delayed work to perform periodic battery state read out.
This delayed work is not stopped across suspend and resume cycle. The
read out can occur early in the resume cycle. In case of an I2C variant
of this hardware, that read out triggers I2C transfer. That I2C transfer
may happen while the I2C controller is still suspended, which produces a
WARNING in the kernel log.
Fix this by introducing trivial PM ops, which stop the delayed work before
the system enters suspend, and schedule the delayed work right after the
system resumes.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231104154920.68585-1-marex@denx.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Replace the soft reset with a graceful reboot.
An acpi event will be triggered by the irq in the pwr-mlxbf.c
to trigger the graceful reboot.
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Link: https://lore.kernel.org/r/20231030203058.8056-1-asmaa@nvidia.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for new
hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi,
and i2c drivers for that type of device (all acked by the respective
subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems, EXCEPT for some merge conflicts that you will run
into in your tree. 2 of them are in device-tree files, which will be
trivial to resolve (accept both sides), and the last in the
drivers/gpio/gpio-ljca.c file, in the remove callback, resolution should
be pretty trivial (take the version in this branch), see here:
https://lore.kernel.org/all/20231016134159.11d8f849@canb.auug.org.au/
for details, or I can provide a resolved merge point if needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUStew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykxgQCggUyfGo+JVV8XZVu5A9KwT6nr7mUAmwUgFxhZ
khK77t0KqF4hjXryeaHa
=iPd+
-----END PGP SIGNATURE-----
Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20231009172923.2457844-19-robh@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect ac->name to be NUL-terminated based on its usage with format
strings:
surface_charger.c:
190: ac->psy_desc.name = ac->name;
...
power_supply_core.c:
174: dev_dbg(&psy->dev, "%s: Found supply : %s\n",
175: psy->desc->name, epsy->desc->name);
Moreover, NUL-padding is not required as ac is already zero-allocated
before being passed to spwr_ac_init():
surface_charger.c:
240: ac = devm_kzalloc(&sdev->dev, sizeof(*ac), GFP_KERNEL);
241: if (!ac)
242: return -ENOMEM;
243:
244: spwr_ac_init(ac, sdev, p->registry, p->name);
... this means any future NUL-byte assignments (like the ones that
strncpy() does) are redundant.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt for the more idiomatic strscpy() usage of:
(dest, src, sizeof(dest))
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-surface_charger-c-v1-1-93ddbf668e10@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect bat->name to be NUL-terminated based on its usage with
strcmp():
power_supply_core.c:
445: return strcmp(psy->desc->name, name) == 0;
... and also by the manual `... - 1` for the length argument of the
original strncpy() invocation.
Furthermore, no NUL-padding is needed as bat is zero-allocated before
calling spwr_battery_init():
826: bat = devm_kzalloc(&sdev->dev, sizeof(*bat), GFP_KERNEL);
827: if (!bat)
828: return -ENOMEM;
829:
830: spwr_battery_init(bat, sdev, p->registry, p->name);
... this means any further NUL-byte assignments (like the ones that
strncpy() does) are redundant.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt to use the more idiomatic strscpy() usage of:
(dest, src, sizeof(dest)).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-surface_battery-c-v2-1-29ed16b2caf1@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect cm->psy_name_buf to be NUL-terminated based on its usage with
format strings:
1522: cm->charger_psy_desc.name = cm->psy_name_buf;
...
1587: dev_err(&pdev->dev, "Cannot register charger-manager with name \"%s\"\n",
1587: cm->charger_psy_desc.name);
Moreover, NUL-padding is not required as `cm` is already zero-allocated
and thus any future NUL-byte assignments (like what strncpy() will do)
are redundant:
1437: cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt for the more idiomatic strscpy() usage of:
strscpy(dest, src, sizeof(dest)).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-charger-manager-c-v1-1-698f73bcad2a@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect bq2515x->model_name to be NUL-terminated based on its usage with
sysfs_emit and format strings:
val->strval is assigned to bq2515x->model_name in
bq2515x_mains_get_property():
| val->strval = bq2515x->model_name;
... then in power_supply_sysfs.c we use value.strval with a format string:
| ret = sysfs_emit(buf, "%s\n", value.strval);
we assigned value.strval via:
| ret = power_supply_get_property(psy, psp, &value);
... which invokes psy->desc->get_property():
| return psy->desc->get_property(psy, psp, val);
with bq2515x_mains_get_property():
| static const struct power_supply_desc bq2515x_mains_desc = {
...
| .get_property = bq2515x_mains_get_property,
Moreover, no NUL-padding is required as bq2515x is zero-allocated in
bq2515x_charger.c:
| bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt to use the more idiomatic strscpy() usage of (dest, src,
sizeof(dest)) as this more closely ties the destination buffer and the
length.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Similar-to: https://lore.kernel.org/all/20231020-strncpy-drivers-power-supply-bq24190_charger-c-v1-1-e896223cb795@google.com/
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-bq2515x_charger-c-v1-1-46664c6edf78@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect bdi->model_name to be NUL-terminated based on its usage with
sysfs_emit and format strings:
val->strval is assigned to bdi->model_name in
bq24190_charger_get_property():
1186 | val->strval = bdi->model_name;
... then in power_supply_sysfs.c we use value.strval with a format string:
311 | ret = sysfs_emit(buf, "%s\n", value.strval);
we assigned value.strval via:
285 | ret = power_supply_get_property(psy, psp, &value);
... which invokes psy->desc->get_property():
1210 | return psy->desc->get_property(psy, psp, val);
with bq24190_charger_get_property():
1320 | static const struct power_supply_desc bq24190_charger_desc = {
...
1325 | .get_property = bq24190_charger_get_property,
Moreover, no NUL-padding is required as bdi is zero-allocated in
bq24190_charger.c:
1798 | bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231020-strncpy-drivers-power-supply-bq24190_charger-c-v1-1-e896223cb795@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Only DT based probing is used for the Motorola CPCAP charger driver, so
drop the !CONFIG_OF parts and redundant of_match_device() call.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231009172923.2457844-20-robh@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Depend on the explicit SoC defines rather than generic
architectures like most of the rest of the HW drivers do.
This makes the drivers only available for the HW and for
compile testing.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231009135833.17880-3-pbrobinson@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add a priority property equal to gpio-restart to allow increasing the
priority of the gpio-poweroff handler.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20231006130428.11259-5-francesco@dolcini.it
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the new sys-off handler API for gpio-poweroff. This allows us to
have more than one poweroff handler and prioritise them.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20231006130428.11259-3-francesco@dolcini.it
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use a struct to store the module variables. This is required to later
move to notifier_blocks where we can have several instances.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20231006130428.11259-2-francesco@dolcini.it
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently the struct "rt5033_charger_data" is initialized rather complicated.
The cause lies inside of the struct "rt5033_charger", where struct
"rt5033_charger_data" is implemented as a pointer *chg.
Therefore, inside of struct "rt5033_charger" change the struct
"rt5033_charger_data" to non-pointer "chg". It is then initialized right
away and can be accessed more easily.
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Link: https://lore.kernel.org/r/0aff8c2a18cf4b88ec3333f6679a8419dd76ca29.1696165240.git.jahau@rocketmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Implement cable detection by extcon and handle the driver according to the
connector type.
There are basically three types of action: "set_charging", "set_otg" and
"set_disconnect".
A forth helper function to "unset_otg" was added because this is used in both
"set_charging" and "set_disconnect". In the first case it covers the rather
rare event that someone changes from OTG to charging without disconnect. In
the second case, when disconnecting, the values are set back to the ones from
initialization to return into a defined state.
Additionally, there is "set_mivr". When connecting to e.g. a laptop/PC, the
minimum input voltage regulation (MIVR) shall prevent a voltage drop if the
cable or the supply is weak. The MIVR value is set to 4600MV, same as in the
Android driver [1]. When disconnecting, MIVR is set back to DISABLED.
In the function rt5033_get_charger_state(): When in OTG mode, the chip
reports status "charging". Change this to "discharging" because there is
no charging going on in OTG mode [2].
Yang Yingliang detected missing mutex_unlock() in some error path and
suggested a fix [3]. The suggestion was squashed into this patch.
[1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/battery/rt5033_charger.c#L499
[2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/battery/rt5033_charger.c#L686-L687
[3] https://lore.kernel.org/linux-pm/20230822030207.644738-1-yangyingliang@huawei.com
Tested-by: Raymond Hackley <raymondhackley@protonmail.com>
Co-developed-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Link: https://lore.kernel.org/r/cc4e37e510abbb0cdfa7faa8408da48c2cb448a4.1696165240.git.jahau@rocketmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Enabling the tps65217-charger driver/module causes an interrupt conflict
with the vbus driver resulting in a probe failure.
The conflict is resolved by changing both driver's threaded interrupt
request function from IRQF_ONESHOT to IRQF_SHARED.
Signed-off-by: Grant B Adams <nemith592@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230823085430.6610-2-nemith592@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
