The names for the helpers we expose to the 'generic' KVM code are a bit
imprecise; we switch the EL0 + EL1 sysreg context and setup trap
controls that do not need to change for every guest entry/exit. Rename +
shuffle things around a bit in preparation for loading the stage-2 MMU
context on vcpu_load().
Link: https://lore.kernel.org/r/20231018233212.2888027-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When SVE is enabled, the host may set bit 16 in SMCCC function IDs, a
hint that indicates an unused SVE state. At the moment NVHE doesn't
account for this bit when inspecting the function ID, and rejects most
calls. Clear the hint bit before comparing function IDs.
About version compatibility: the host's PSCI driver initially probes the
firmware for a SMCCC version number. If the firmware implements a
protocol recent enough (1.3), subsequent SMCCC calls have the hint bit
set. Since the hint bit was reserved in earlier versions of the
protocol, clearing it is fine regardless of the version in use.
When a new hint is added to the protocol in the future, it will be added
to ARM_SMCCC_CALL_HINTS and NVHE will handle it straight away. This
patch only clears known hints and leaves reserved bits as is, because
future SMCCC versions could use reserved bits as modifiers for the
function ID, rather than hints.
Fixes: cfa7ff959a ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
Reported-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230911145254.934414-4-jean-philippe@linaro.org
We can now start with the fun stuff: if we enable VHE *only* for
the hypervisor, we need to generate the VHE instructions when
accessing the system registers.
For this, reporpose the alternative sequence to be keyed off
ARM64_KVM_HVHE in the nVHE hypervisor code, and only there.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-10-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In the VHE hypervisor code, we should be using the remapped VHE
accessors, no ifs, no buts. No need to generate any alternative.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230609162200.2024064-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We will need a sanitized copy of SYS_ID_AA64SMFR0_EL1 from the nVHE EL2
code shortly, so make sure to provide it with a copy.
Signed-off-by: Quentin Perret <qperret@google.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230201103755.1398086-2-qperret@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Sharing 'kvm_arm_vmid_bits' between EL1 and EL2 allows the host to
modify the variable arbitrarily, potentially leading to all sorts of
shenanians as this is used to configure the VTTBR register for the
guest stage-2.
In preparation for unmapping host sections entirely from EL2, maintain
a copy of 'kvm_arm_vmid_bits' in the pKVM hypervisor and initialise it
from the host value while it is still trusted.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-23-will@kernel.org
In preparation for handling cache maintenance of guest pages from within
the pKVM hypervisor at EL2, introduce an EL2 copy of icache_inval_pou()
which will later be plumbed into the stage-2 page-table cache
maintenance callbacks, ensuring that the initial contents of pages
mapped as executable into the guest stage-2 page-table is visible to the
instruction fetcher.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-17-will@kernel.org
QARMA3 is relaxed version of the QARMA5 algorithm which expected to
reduce the latency of calculation while still delivering a suitable
level of security.
Support for QARMA3 can be discovered via ID_AA64ISAR2_EL1
APA3, bits [15:12] Indicates whether the QARMA3 algorithm is
implemented in the PE for address
authentication in AArch64 state.
GPA3, bits [11:8] Indicates whether the QARMA3 algorithm is
implemented in the PE for generic code
authentication in AArch64 state.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220224124952.119612-4-vladimir.murzin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Now that we don't have any users left for __sve_save_state, remove
it altogether. Should we ever need to save the SVE state from the
hypervisor again, we can always re-introduce it.
Suggested-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add system register handlers for protected VMs. These cover Sys64
registers (including feature id registers), and debug.
No functional change intended as these are not hooked in yet to
the guest exit handlers introduced earlier. So when trapping is
triggered, the exit handlers let the host handle it, as before.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211010145636.1950948-8-tabba@google.com
On deactivating traps, restore the value of mdcr_el2 from the
newly created and preserved host value vcpu context, rather than
directly reading the hardware register.
Up until and including this patch the two values are the same,
i.e., the hardware register and the vcpu one. A future patch will
be changing the value of mdcr_el2 on activating traps, and this
ensures that its value will be restored.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210817081134.2918285-7-tabba@google.com
hyp_panic() reports the address of the panic by using ELR_EL2, but this
isn't a useful address when hyp_panic() is called directly. Replace such
direct calls with BUG() and BUG_ON() which use BRK to trigger an
exception that then goes to hyp_panic() with the correct address. Also
remove the hyp_panic() declaration from the header file to avoid
accidental misuse.
Signed-off-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-5-ascull@google.com
Now that the read_ctr macro has been specialised for nVHE,
the whole CPU_FTR_REG_HYP_COPY infrastrcture looks completely
overengineered.
Simplify it by populating the two u64 quantities (MMFR0 and 1)
that the hypervisor need.
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When memory protection is enabled, the EL2 code needs the ability to
create and manage its own page-table. To do so, introduce a new set of
hypercalls to bootstrap a memory management system at EL2.
This leads to the following boot flow in nVHE Protected mode:
1. the host allocates memory for the hypervisor very early on, using
the memblock API;
2. the host creates a set of stage 1 page-table for EL2, installs the
EL2 vectors, and issues the __pkvm_init hypercall;
3. during __pkvm_init, the hypervisor re-creates its stage 1 page-table
and stores it in the memory pool provided by the host;
4. the hypervisor then extends its stage 1 mappings to include a
vmemmap in the EL2 VA space, hence allowing to use the buddy
allocator introduced in a previous patch;
5. the hypervisor jumps back in the idmap page, switches from the
host-provided page-table to the new one, and wraps up its
initialization by enabling the new allocator, before returning to
the host.
6. the host can free the now unused page-table created for EL2, and
will now need to issue hypercalls to make changes to the EL2 stage 1
mappings instead of modifying them directly.
Note that for the sake of simplifying the review, this patch focuses on
the hypervisor side of things. In other words, this only implements the
new hypercalls, but does not make use of them from the host yet. The
host-side changes will follow in a subsequent patch.
Credits to Will for __pkvm_init_switch_pgd.
Acked-by: Will Deacon <will@kernel.org>
Co-authored-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-18-qperret@google.com
In order to keep the code readable, move the host-save/guest-restore
sequences in their own functions, with the following changes:
- the hypervisor ZCR is now set from C code
- ZCR_EL2 is always used as the EL2 accessor
This results in some minor assembler macro rework.
No functional change intended.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
as we are about to change the way KVM deals with SVE, provide
KVM with its own save/restore SVE primitives.
No functional change intended.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When panicking from the nVHE hyp and restoring the host context, x29 is
expected to hold a pointer to the host context. This wasn't being done
so fix it to make sure there's a valid pointer the host context being
used.
Rather than passing a boolean indicating whether or not the host context
should be restored, instead pass the pointer to the host context. NULL
is passed to indicate that no context should be restored.
Fixes: a2e102e20f ("KVM: arm64: nVHE: Handle hyp panics")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Scull <ascull@google.com>
[maz: partial rewrite to fit 5.12-rc1]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210219122406.1337626-1-ascull@google.com
Message-Id: <20210305185254.3730990-4-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The nVHE KVM hyp drains and disables the SPE buffer, before
entering the guest, as the EL1&0 translation regime
is going to be loaded with that of the guest.
But this operation is performed way too late, because :
- The owning translation regime of the SPE buffer
is transferred to EL2. (MDCR_EL2_E2PB == 0)
- The guest Stage1 is loaded.
Thus the flush could use the host EL1 virtual address,
but use the EL2 translations instead of host EL1, for writing
out any cached data.
Fix this by moving the SPE buffer handling early enough.
The restore path is doing the right thing.
Fixes: 014c4c77aa ("KVM: arm64: Improve debug register save/restore flow")
Cc: stable@vger.kernel.org
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210302120345.3102874-1-suzuki.poulose@arm.com
Message-Id: <20210305185254.3730990-2-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a handler of PSCI SMCs in nVHE hyp code. The handler is initialized
with the version used by the host's PSCI driver and the function IDs it
was configured with. If the SMC function ID matches one of the
configured PSCI calls (for v0.1) or falls into the PSCI function ID
range (for v0.2+), the SMC is handled by the PSCI handler. For now, all
SMCs return PSCI_RET_NOT_SUPPORTED.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-17-dbrazdil@google.com
Once we start initializing KVM on newly booted cores before the rest of
the kernel, parameters to __do_hyp_init will need to be provided by EL2
rather than EL1. At that point it will not be possible to pass its three
arguments directly because PSCI_CPU_ON only supports one context
argument.
Refactor __do_hyp_init to accept its parameters in a struct. This
prepares the code for KVM booting cores as well as removes any limits on
the number of __do_hyp_init arguments.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-11-dbrazdil@google.com
Restore the host context when panicking from hyp to give the best chance
of the panic being clean.
The host requires that registers be preserved such as x18 for the shadow
callstack. If the panic is caused by an exception from EL1, the host
context is still valid so the panic can return straight back to the
host. If the panic comes from EL2 then it's most likely that the hyp
context is active and the host context needs to be restored.
There are windows before and after the host context is saved and
restored that restoration is attempted incorrectly and the panic won't
be clean.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-14-ascull@google.com
During __guest_enter, save and restore from a new hyp context rather
than the host context. This is preparation for separation of the hyp and
host context in nVHE.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-9-ascull@google.com
Introduce a percpu variable to hold the address of the selected hyp
vector that will be used with guests. This avoids the selection process
each time a guest is being entered and can be used by nVHE when a
separate vector is introduced for the host.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-6-ascull@google.com
hyp_panic is able to find all the context it needs from within itself so
remove the argument. The __hyp_panic wrapper becomes redundant so is
also removed.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200915104643.2543892-3-ascull@google.com
With nVHE code now fully separated from the rest of the kernel, the effects of
the __hyp_text macro (which had to be applied on all nVHE code) can be
achieved with build rules instead. The macro used to:
(a) move code to .hyp.text ELF section, now done by renaming .text using
`objcopy`, and
(b) `notrace` and `__noscs` would negate effects of CC_FLAGS_FTRACE and
CC_FLAGS_SCS, respectivelly, now those flags are erased from
KBUILD_CFLAGS (same way as in EFI stub).
Note that by removing __hyp_text from code shared with VHE, all VHE code is now
compiled into .text and without `notrace` and `__noscs`.
Use of '.pushsection .hyp.text' removed from assembly files as this is now also
covered by the build rules.
For MAINTAINERS: if needed to re-run, uses of macro were removed with the
following command. Formatting was fixed up manually.
find arch/arm64/kvm/hyp -type f -name '*.c' -o -name '*.h' \
-exec sed -i 's/ __hyp_text//g' {} +
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-15-dbrazdil@google.com
timer-sr.c contains a HVC handler for setting CNTVOFF_EL2 and two helper
functions for controlling access to physical counter. The former is used by
both VHE/nVHE and is duplicated, the latter are used only by nVHE and moved
to nvhe/timer-sr.c.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-13-dbrazdil@google.com
sysreg-sr.c contains KVM's code for saving/restoring system registers, with
some code shared between VHE/nVHE. These common routines are moved to
a header file, VHE-specific code is moved to vhe/sysreg-sr.c and nVHE-specific
code to nvhe/sysreg-sr.c.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-12-dbrazdil@google.com
switch.c implements context-switching for KVM, with large parts shared between
VHE/nVHE. These common routines are moved to a header file, VHE-specific code
is moved to vhe/switch.c and nVHE-specific code is moved to nvhe/switch.c.
Previously __kvm_vcpu_run needed a different symbol name for VHE/nVHE. This
is cleaned up and the caller in arm.c simplified.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-10-dbrazdil@google.com
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested virtualization
- Nested AMD event injection facelift, building on the rework of generic code
and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page fault
work, will come next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7VJcYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPf6QgAq4wU5wdd1lTGz/i3DIhNVJNJgJlp
ozLzRdMaJbdbn5RpAK6PEBd9+pt3+UlojpFB3gpJh2Nazv2OzV4yLQgXXXyyMEx1
5Hg7b4UCJYDrbkCiegNRv7f/4FWDkQ9dx++RZITIbxeskBBCEI+I7GnmZhGWzuC4
7kj4ytuKAySF2OEJu0VQF6u0CvrNYfYbQIRKBXjtOwuRK4Q6L63FGMJpYo159MBQ
asg3B1jB5TcuGZ9zrjL5LkuzaP4qZZHIRs+4kZsH9I6MODHGUxKonrkablfKxyKy
CFK+iaHCuEXXty5K0VmWM3nrTfvpEjVjbMc7e1QGBQ5oXsDM0pqn84syRg==
=v7Wn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
Support for Clang's Shadow Call Stack in the kernel
(Sami Tolvanen and Will Deacon)
* for-next/scs:
arm64: entry-ftrace.S: Update comment to indicate that x18 is live
scs: Move DEFINE_SCS macro into core code
scs: Remove references to asm/scs.h from core code
scs: Move scs_overflow_check() out of architecture code
arm64: scs: Use 'scs_sp' register alias for x18
scs: Move accounting into alloc/free functions
arm64: scs: Store absolute SCS stack pointer value in thread_info
efi/libstub: Disable Shadow Call Stack
arm64: scs: Add shadow stacks for SDEI
arm64: Implement Shadow Call Stack
arm64: Disable SCS for hypervisor code
arm64: vdso: Disable Shadow Call Stack
arm64: efi: Restore register x18 if it was corrupted
arm64: Preserve register x18 when CPU is suspended
arm64: Reserve register x18 from general allocation with SCS
scs: Disable when function graph tracing is enabled
scs: Add support for stack usage debugging
scs: Add page accounting for shadow call stack allocations
scs: Add support for Clang's Shadow Call Stack (SCS)
Having __load_guest_stage2 in kvm_hyp.h is quickly going to trigger
a circular include problem. In order to avoid this, let's move
it to kvm_mmu.h, where it will be a better fit anyway.
In the process, drop the __hyp_text annotation, which doesn't help
as the function is marked as __always_inline.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
If we move the used_lrs field to the version-specific cpu interface
structure, the following functions only operate on the struct
vgic_v3_cpu_if and not the full vcpu:
__vgic_v3_save_state
__vgic_v3_restore_state
__vgic_v3_activate_traps
__vgic_v3_deactivate_traps
__vgic_v3_save_aprs
__vgic_v3_restore_aprs
This is going to be very useful for nested virt, so move the used_lrs
field and change the prototypes and implementations of these functions to
take the cpu_if parameter directly.
No functional change.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Disable SCS for code that runs at a different exception level by
adding __noscs to __hyp_text.
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Errata 1165522, 1319367 and 1530923 each allow TLB entries to be
allocated as a result of a speculative AT instruction. In order to
avoid mandating VHE on certain affected CPUs, apply the workaround to
both the nVHE and the VHE case for all affected CPUs.
Signed-off-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
CC: Marc Zyngier <maz@kernel.org>
CC: James Morse <james.morse@arm.com>
CC: Suzuki K Poulose <suzuki.poulose@arm.com>
CC: Will Deacon <will@kernel.org>
CC: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20200504094858.108917-1-ascull@google.com
Signed-off-by: Will Deacon <will@kernel.org>
- Fix compilation on 32bit
- Move VHE guest entry/exit into the VHE-specific entry code
- Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
-----BEGIN PGP SIGNATURE-----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=NpPo
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.6, take #1
- Fix compilation on 32bit
- Move VHE guest entry/exit into the VHE-specific entry code
- Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
KVM uses swab32() when mediating GIC MMIO accesses if the GICV is badly
aligned, and the host and guest differ in endianness.
arm64 doesn't provide a __arch_swab32(), so __fswab32() is always backed
by the macro implementation that the compiler reduces to a single
instruction. But the static-inline causes problems for KVM if the compiler
chooses not to inline this function, it may not be located in the
__hyp_text where __vgic_v2_perform_cpuif_access() needs it.
Create our own __kvm_swab32() macro that calls ___constant_swab32()
directly. This way we know it will always be inlined.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200220165839.256881-3-james.morse@arm.com
Cortex-A55 erratum 1530923 allows TLB entries to be allocated as a
result of a speculative AT instruction. This may happen in the middle of
a guest world switch while the relevant VMSA configuration is in an
inconsistent state, leading to erroneous content being allocated into
TLBs.
The same workaround as is used for Cortex-A76 erratum 1165522
(WORKAROUND_SPECULATIVE_AT_VHE) can be used here. Note that this
mandates the use of VHE on affected parts.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Cortex-A55 is affected by a similar erratum, so rename the existing
workaround for errarum 1165522 so it can be used for both errata.
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
hyp_alternate_select() is now completely unused. Goodbye.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Currently, the {read,write}_sysreg_el*() accessors for accessing
particular ELs' sysregs in the presence of VHE rely on some local
hacks and define their system register encodings in a way that is
inconsistent with the core definitions in <asm/sysreg.h>.
As a result, it is necessary to add duplicate definitions for any
system register that already needs a definition in sysreg.h for
other reasons.
This is a bit of a maintenance headache, and the reasons for the
_el*() accessors working the way they do is a bit historical.
This patch gets rid of the shadow sysreg definitions in
<asm/kvm_hyp.h>, converts the _el*() accessors to use the core
__msr_s/__mrs_s interface, and converts all call sites to use the
standard sysreg #define names (i.e., upper case, with SYS_ prefix).
This patch will conflict heavily anyway, so the opportunity
to clean up some bad whitespace in the context of the changes is
taken.
The change exposes a few system registers that have no sysreg.h
definition, due to msr_s/mrs_s being used in place of msr/mrs:
additions are made in order to fill in the gaps.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://www.spinics.net/lists/kvm-arm/msg31717.html
[Rebased to v4.21-rc1]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[Rebased to v5.2-rc5, changelog updates]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* POWER: support for direct access to the POWER9 XIVE interrupt controller,
memory and performance optimizations.
* x86: support for accessing memory not backed by struct page, fixes and refactoring
* Generic: dirty page tracking improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJc3qV/AAoJEL/70l94x66Dn3QH/jX1Bn0P/RZAIt4w0SySklSg
PqxUKDyBQqB9vN9Qeb9jWXAKPH2CtM3+up/rz7oRnBWp7qA6vXcC/R/QJYAvzdXE
nklsR/oYCsflR1KdlVYuDvvPCPP2fLBU5zfN83OsaBQ8fNRkm3gN+N5XQ2SbXbLy
Mo9tybS4otY201UAC96e8N0ipwwyCRpDneQpLcl+F5nH3RBt63cVbs04O+70MXn7
eT4I+8K3+Go7LATzT8hglD21D/7uvE31qQb6yr5L33IfhU4GB51RZzBXTNaAdY8n
hT1rMrRkAMAFWYZPQDfoMadjWU3i5DIfstKjDxOr9oTfuOEp5Z+GvJwvVnUDg1I=
=D0+p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- support for SVE and Pointer Authentication in guests
- PMU improvements
POWER:
- support for direct access to the POWER9 XIVE interrupt controller
- memory and performance optimizations
x86:
- support for accessing memory not backed by struct page
- fixes and refactoring
Generic:
- dirty page tracking improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (155 commits)
kvm: fix compilation on aarch64
Revert "KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU"
kvm: x86: Fix L1TF mitigation for shadow MMU
KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible
KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM device
KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing"
KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUs
kvm: nVMX: Set nested_run_pending in vmx_set_nested_state after checks complete
tests: kvm: Add tests for KVM_SET_NESTED_STATE
KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state
tests: kvm: Add tests for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_CPU_ID
tests: kvm: Add tests to .gitignore
KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2
KVM: Fix kvm_clear_dirty_log_protect off-by-(minus-)one
KVM: Fix the bitmap range to copy during clear dirty
KVM: arm64: Fix ptrauth ID register masking logic
KVM: x86: use direct accessors for RIP and RSP
KVM: VMX: Use accessors for GPRs outside of dedicated caching logic
KVM: x86: Omit caching logic for always-available GPRs
kvm, x86: Properly check whether a pfn is an MMIO or not
...
Clang's integrated assembler does not allow assembly macros defined
in one inline asm block using the .macro directive to be used across
separate asm blocks. LLVM developers consider this a feature and not a
bug, recommending code refactoring:
https://bugs.llvm.org/show_bug.cgi?id=19749
As binutils doesn't allow macros to be redefined, this change uses
UNDEFINE_MRS_S and UNDEFINE_MSR_S to define corresponding macros
in-place and workaround gcc and clang limitations on redefining macros
across different assembler blocks.
Specifically, the current state after preprocessing looks like this:
asm volatile(".macro mXX_s ... .endm");
void f()
{
asm volatile("mXX_s a, b");
}
With GCC, it gives macro redefinition error because sysreg.h is included
in multiple source files, and assembler code for all of them is later
combined for LTO (I've seen an intermediate file with hundreds of
identical definitions).
With clang, it gives macro undefined error because clang doesn't allow
sharing macros between inline asm statements.
I also seem to remember catching another sort of undefined error with
GCC due to reordering of macro definition asm statement and generated
asm code for function that uses the macro.
The solution with defining and undefining for each use, while certainly
not elegant, satisfies both GCC and clang, LTO and non-LTO.
Co-developed-by: Alex Matveev <alxmtvv@gmail.com>
Co-developed-by: Yury Norov <ynorov@caviumnetworks.com>
Co-developed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
__fpsimd_enabled() no longer exists, but a dangling declaration has
survived in kvm_hyp.h.
This patch gets rid of it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In preparation for nested virtualization where we are going to have more
than a single VMID per VM, let's factor out the VMID data into a
separate VMID data structure and change the VMID allocator to operate on
this new structure instead of using a struct kvm.
This also means that udate_vttbr now becomes update_vmid, and that the
vttbr itself is generated on the fly based on the stage 2 page table
base address and the vmid.
We cache the physical address of the pgd when allocating the pgd to
avoid doing the calculation on every entry to the guest and to avoid
calling into potentially non-hyp-mapped code from hyp/EL2.
If we wanted to merge the VMID allocator with the arm64 ASID allocator
at some point in the future, it should actually become easier to do that
after this patch.
Note that to avoid mapping the kvm_vmid_bits variable into hyp, we
simply forego the masking of the vmid value in kvm_get_vttbr and rely on
update_vmid to always assign a valid vmid value (within the supported
range).
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
[maz: minor cleanups]
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In order to ensure that slipping HCR_EL2.TGE is done at the right
time when switching translation regime, let insert the required ISBs
that will be patched in when erratum 1165522 is detected.
Take this opportunity to add the missing include of asm/alternative.h
which was getting there by pure luck.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add support for setting the VTCR_EL2 per VM, rather than hard
coding a value at boot time per CPU. This would allow us to tune
the stage2 page table parameters per VM in the later changes.
We compute the VTCR fields based on the system wide sanitised
feature registers, except for the hardware management of Access
Flags (VTCR_EL2.HA). It is fine to run a system with a mix of
CPUs that may or may not update the page table Access Flags.
Since the bit is RES0 on CPUs that don't support it, the bit
should be ignored on them.
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We load the stage2 context of a guest for different operations,
including running the guest and tlb maintenance on behalf of the
guest. As of now only the vttbr is private to the guest, but this
is about to change with IPA per VM. Add a helper to load the stage2
configuration for a VM, which could do the right thing with the
future changes.
Cc: Christoffer Dall <cdall@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Oliver Upton