Commit Graph

18 Commits

Author SHA1 Message Date
Linus Torvalds 37dc79565c Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 4.15:

  API:

   - Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
     This change touches code outside the crypto API.
   - Reset settings when empty string is written to rng_current.

  Algorithms:

   - Add OSCCA SM3 secure hash.

  Drivers:

   - Remove old mv_cesa driver (replaced by marvell/cesa).
   - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
   - Add ccm/gcm AES in crypto4xx.
   - Add support for BCM7278 in iproc-rng200.
   - Add hash support on Exynos in s5p-sss.
   - Fix fallback-induced error in vmx.
   - Fix output IV in atmel-aes.
   - Fix empty GCM hash in mediatek.

  Others:

   - Fix DoS potential in lib/mpi.
   - Fix potential out-of-order issues with padata"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
  lib/mpi: call cond_resched() from mpi_powm() loop
  crypto: stm32/hash - Fix return issue on update
  crypto: dh - Remove pointless checks for NULL 'p' and 'g'
  crypto: qat - Clean up error handling in qat_dh_set_secret()
  crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
  crypto: dh - Don't permit 'p' to be 0
  crypto: dh - Fix double free of ctx->p
  hwrng: iproc-rng200 - Add support for BCM7278
  dt-bindings: rng: Document BCM7278 RNG200 compatible
  crypto: chcr - Replace _manual_ swap with swap macro
  crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
  hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
  crypto: atmel - remove empty functions
  crypto: ecdh - remove empty exit()
  MAINTAINERS: update maintainer for qat
  crypto: caam - remove unused param of ctx_map_to_sec4_sg()
  crypto: caam - remove unneeded edesc zeroization
  crypto: atmel-aes - Reset the controller before each use
  crypto: atmel-aes - properly set IV after {en,de}crypt
  hwrng: core - Reset user selected rng by writing "" to rng_current
  ...
2017-11-14 10:52:09 -08:00
Gilad Ben-Yossef 4e5b0ad582 crypto: remove redundant backlog checks on EBUSY
Now that -EBUSY return code only indicates backlog queueing
we can safely remove the now redundant check for the
CRYPTO_TFM_REQ_MAY_BACKLOG flag when -EBUSY is returned.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03 22:11:17 +08:00
Christophe Jaillet 5125e4e867 crypto: xts - Fix an error handling path in 'create()'
All error handling paths 'goto err_drop_spawn' except this one.
In order to avoid some resources leak, we should do it as well here.

Fixes: f1c131b454 ("crypto: xts - Convert to skcipher")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-07 12:04:31 +08:00
Linus Torvalds 5a0387a8a8 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 4.12:

  API:
   - Add batch registration for acomp/scomp
   - Change acomp testing to non-unique compressed result
   - Extend algorithm name limit to 128 bytes
   - Require setkey before accept(2) in algif_aead

  Algorithms:
   - Add support for deflate rfc1950 (zlib)

  Drivers:
   - Add accelerated crct10dif for powerpc
   - Add crc32 in stm32
   - Add sha384/sha512 in ccp
   - Add 3des/gcm(aes) for v5 devices in ccp
   - Add Queue Interface (QI) backend support in caam
   - Add new Exynos RNG driver
   - Add ThunderX ZIP driver
   - Add driver for hardware random generator on MT7623 SoC"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
  crypto: stm32 - Fix OF module alias information
  crypto: algif_aead - Require setkey before accept(2)
  crypto: scomp - add support for deflate rfc1950 (zlib)
  crypto: scomp - allow registration of multiple scomps
  crypto: ccp - Change ISR handler method for a v5 CCP
  crypto: ccp - Change ISR handler method for a v3 CCP
  crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
  crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
  Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
  crypto: ccp - Disable interrupts early on unload
  crypto: ccp - Use only the relevant interrupt bits
  hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
  dt-bindings: hwrng: Add Mediatek hardware random generator bindings
  crypto: crct10dif-vpmsum - Fix missing preempt_disable()
  crypto: testmgr - replace compression known answer test
  crypto: acomp - allow registration of multiple acomps
  hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
  crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
  padata: get_next is never NULL
  crypto: exynos - Add new Exynos RNG driver
  ...
2017-05-02 15:53:46 -07:00
Herbert Xu aa4a829bda crypto: xts - Fix use-after-free on EINPROGRESS
When we get an EINPROGRESS completion in xts, we will end up marking
the request as done and freeing it.  This then blows up when the
request is really completed as we've already freed the memory.

Fixes: f1c131b454 ("crypto: xts - Convert to skcipher")
Cc: <stable@vger.kernel.org>
Reported-by: Nathan Royce <nroycea+kernel@gmail.com>
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-04-10 19:09:17 +08:00
Ondrej Mosnáček e55318c84f crypto: gf128mul - switch gf128mul_x_ble to le128
Currently, gf128mul_x_ble works with pointers to be128, even though it
actually interprets the words as little-endian. Consequently, it uses
cpu_to_le64/le64_to_cpu on fields of type __be64, which is incorrect.

This patch fixes that by changing the function to accept pointers to
le128 and updating all users accordingly.

Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Reviewd-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05 21:58:37 +08:00
Eric Biggers 9df0eb180c crypto: xts,lrw - fix out-of-bounds write after kmalloc failure
In the generic XTS and LRW algorithms, for input data > 128 bytes, a
temporary buffer is allocated to hold the values to be XOR'ed with the
data before and after encryption or decryption.  If the allocation
fails, the fixed-size buffer embedded in the request buffer is meant to
be used as a fallback --- resulting in more calls to the ECB algorithm,
but still producing the correct result.  However, we weren't correctly
limiting subreq->cryptlen in this case, resulting in pre_crypt()
overrunning the embedded buffer.  Fix this by setting subreq->cryptlen
correctly.

Fixes: f1c131b454 ("crypto: xts - Convert to skcipher")
Fixes: 700cb3f5fe ("crypto: lrw - Convert to skcipher")
Cc: stable@vger.kernel.org # v4.10+
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24 21:51:34 +08:00
Herbert Xu 89027579bc crypto: xts - Propagate NEED_FALLBACK bit
When we're used as a fallback algorithm, we should propagate
the NEED_FALLBACK bit when searching for the underlying ECB mode.

This just happens to fix a hang too because otherwise the search
may end up loading the same module that triggered this XTS creation.

Cc: stable@vger.kernel.org #4.10
Fixes: f1c131b454 ("crypto: xts - Convert to skcipher")
Reported-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-27 18:09:41 +08:00
Herbert Xu f1c131b454 crypto: xts - Convert to skcipher
This patch converts xts over to the skcipher interface.  It also
optimises the implementation to be based on ECB instead of the
underlying cipher.  For compatibility the existing naming scheme
of xts(aes) is maintained as opposed to the more obvious one of
xts(ecb(aes)).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-28 21:23:18 +08:00
Corentin LABBE ddbc73616c crypto: xts - fix a little typo
The sentence 'Based on' is misspelled, respell it.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16 17:16:49 +08:00
Stephan Mueller 28856a9e52 crypto: xts - consolidate sanity check for keys
The patch centralizes the XTS key check logic into the service function
xts_check_key which is invoked from the different XTS implementations.
With this, the XTS implementations in ARM, ARM64, PPC and S390 have now
a sanity check for the XTS keys similar to the other arches.

In addition, this service function received a check to ensure that the
key != the tweak key which is mandated by FIPS 140-2 IG A.9. As the
check is not present in the standards defining XTS, it is only enforced
in FIPS mode of the kernel.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-02-17 04:07:51 +08:00
Kees Cook 4943ba16bb crypto: include crypto- module prefix in template
This adds the module loading prefix "crypto-" to the template lookup
as well.

For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly
includes the "crypto-" prefix at every level, correctly rejecting "vfat":

	net-pf-38
	algif-hash
	crypto-vfat(blowfish)
	crypto-vfat(blowfish)-all
	crypto-vfat

Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-26 20:06:30 +08:00
Jussi Kivilinna ce0045561e crypto: xts: add interface for parallelized cipher implementations
Add xts_crypt() function that can be used by cipher implementations that can
benefit from parallelized cipher operations.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 11:56:06 +08:00
Jussi Kivilinna f9d2691fc9 crypto: xts - use blocksize constant
XTS has fixed blocksize of 16. Define XTS_BLOCK_SIZE and use in place of
crypto_cipher_blocksize().

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09 11:53:32 +08:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Julia Lawall 8db050786a crypto: Use ERR_CAST
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)).  The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
T x;
identifier f;
@@

T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
 ...+> }

@@
expression x;
@@

- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-26 10:36:51 +10:00
Sebastian Siewior 6212f2c7f7 [CRYPTO] xts: Use proper alignment
The XTS blockmode uses a copy of the IV which is saved on the stack
and may or may not be properly aligned. If it is not, it will break
hardware cipher like the geode or padlock.
This patch encrypts the IV in place so we don't have to worry about
alignment.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Tested-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-03-06 18:56:19 +08:00
Rik Snel f19f5111c9 [CRYPTO] xts: XTS blockcipher mode implementation without partial blocks
XTS currently considered to be the successor of the LRW mode by the IEEE1619
workgroup. LRW was discarded, because it was not secure if the encyption key
itself is encrypted with LRW.

XTS does not have this problem. The implementation is pretty straightforward,
a new function was added to gf128mul to handle GF(128) elements in ble format.
Four testvectors from the specification
	http://grouper.ieee.org/groups/1619/email/pdf00086.pdf
were added, and they verify on my system.

Signed-off-by: Rik Snel <rsnel@cube.dyndns.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-10 16:55:45 -07:00