We're not supposed to have more than one btree_trans at a time in a
given thread - that causes recursive locking deadlocks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch adds a superblock error counter for every distinct fsck
error; this means that when analyzing filesystems out in the wild we'll
be able to see what sorts of inconsistencies are being found and repair,
and hence what bugs to look for.
Errors validating bkeys are not yet considered distinct fsck errors, but
this patch adds a new helper, bkey_fsck_err(), in order to add distinct
error types for them as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
clang had a few more warnings about enum conversion, and also didn't
like the opts.c initializer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
As part of the forward compatibility patch series, we need to allow for
new key types without complaining loudly when running an old version.
This patch changes the flags parameter of bkey_invalid to an enum, and
adds a new flag to indicate we're being called from the transaction
commit path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new field to bkey_ops for the minimum size of the value,
which standardizes that check and also enforces the new rule (previously
done somewhat ad-hoc) that we can extend value types by adding new
fields on to the end.
To make that work we do _not_ initialize min_val_size with sizeof,
instead we initialize it to the size of the first version of those
values.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This implements a new shutdown path for erasure coding, which is needed
for the upcoming BCH_WRITE_WAIT_FOR_EC write path.
The process is:
- Cancel new stripes being built up
- Close out/cancel open buckets on write points or the partial list
that are for stripes
- Shutdown rebalance/copygc
- Then wait for in flight new stripes to finish
With BCH_WRITE_WAIT_FOR_EC, move ops will be waiting on stripes to fill
up before they complete; the new ec shutdown path is needed for shutting
down copygc/rebalance without deadlocking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This will be used for move writes, which will be waiting until the
stripe is created to do the index update. They need to prevent the
stripe from being reclaimed until their index update is done, so we need
another refcount that just keeps the stripe open.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
# Conflicts:
# fs/bcachefs/ec.c
# fs/bcachefs/io.c
Now that we have a separate data structure for tracking open stripes,
the stripes heap can track all existing stripes, which is a nice
simplification.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new hash table for stripes being created or updated, instead
of hackily relying on the stripes heap.
This lets us reserve the slot for the new stripe up front, at the same
time as we would pick an existing stripe - if we were updating an
existing stripe - making the overall code more consistent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This code predates plumbing btree_trans through the bucket allocation
path: switching to it fixes a deadlock due to using multiple btree_trans
at the same time, which we never want to do.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is the start of reorganizing the data IO paths. The plan is to also
break apart io.c into data_read.c and data_write.c, and migrate_write
will be renamed to the data_update path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to ensure that work structs in bch_fs always get initialized -
otherwise an error in filesystem initialization can pop a warning in the
workqueue code when we try to cancel a work struct that wasn't
initialized.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a new parameter to .key_invalid() methods for whether the key
is being read or written; the idea being that methods can do more
aggressive checks when a key is newly created and being written, when we
wouldn't want to delete the key because of those checks.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This replaces the switch statements in bch2_mark_key(),
bch2_trans_mark_key() with new bkey methods - prep work for the next
patch, which fixes BTREE_TRIGGER_WANTS_OLD_AND_NEW.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
bch2_ec_mem_alloc() was only used by GC, and there's no real need to
preallocate the stripes radix tree since we can cope fine with memory
allocation failure when we use the radix tree. This deletes a fair bit
of code, and it's also needed for the upcoming patch because
bch2_btree_iter_peek_prev() won't be working before journal replay
completes (and using it was incorrect previously, as well).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We have two radix trees of stripes - one that mirrors some information
from the stripes btree in normal operation, and another that GC uses to
recalculate block usage counts.
The normal one is now only used for finding partially empty stripes in
order to reuse them - the normal stripes radix tree and the GC stripes
radix tree are used significantly differently, so this patch splits them
into separate types.
In an upcoming patch we'll be replacing c->stripes with a btree that
indexes stripes by the order we want to reuse them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- The backpointer that ec_stripe_update_ptrs() uses now needs to include
the snapshot ID, which means we have to change where we add the
backpointer to after getting the snapshot ID for the new extents
- ec_stripe_update_ptrs() needs to be calling bch2_trans_begin()
- improve error message in bch2_mark_stripe()
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Allocating buckets for existing stripes was busted, in part because the
data structures were too contorted. This reworks new stripes so that we
have an array of open buckets that matches blocks in the stripe, and
it's sparse if we're reusing an existing stripe.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug where mark and sweep gc incorrectly was clearing out
the stripes heap and causing assertions to fire later - simpler to just
create the stripes heap after gc has finished.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Originally bch_extent_stripe_ptr didn't contain the block index,
instead we'd have to search through the stripe pointers to figure out
which pointer matched. When the block field was added to
bch_extent_stripe_ptr, not all of the code was updated to use it.
This patch fixes that, and we also now verify that field where it
makes sense.
- The ec_stripe_buf_init/exit() functions have been improved, and are
now used by the bch2_ec_read_extent() (recovery read) path.
- get_stripe_key() is now used by bch2_ec_read_extent().
- We now have a getter and setter for checksums within a stripe, like
we had previously for block sector counts, and ec_generate_checksums
and ec_validate_checksums are now quite a bit smaller and cleaner.
ec.c still needs a lot of work, but this patch is slowly moving things
in the right direction.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Allocations for copygc have to be kept separate from everything else,
so that copygc doesn't get starved.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We don't want writes to not get erasure coded just because the allocator
temporarily wasn't keeping up.
However, it's not guaranteed that these allocations will ever succeed,
we can currently get stuck - especially if devices are different sizes -
we still have work to do in this area.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, in the stripe creation path, when reusing an existing stripe
we'd read the existing stripe synchronously - ouch.
Now, we allocate two stripe bufs if we're using an existing stripe, so
that we can do the read asynchronously - and, we read the full stripe so
that we can run recovery, if necessary.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This now means "the maximum number of pointers within a bkey" - and
bch_devs_list is updated to use it instead of BCH_REPLICAS_MAX, since
stripes can contain more than BCH_REPLICAS_MAX pointers.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Instead of trying to charge EC parity to the data within the stripe
(which is subject to rounding errors), let's charge it to the stripe
itself. It should also make -ENOSPC issues easier to deal with if we
charge for parity blocks up front, and means we can also make more fine
grained accounting available to the user.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we've got transactional alloc info updates (and have for
awhile), we don't need to write it out on shutdown, and we don't need to
write it out on startup except when GC found errors - this is a big
improvement to mount/unmount performance.
This patch also fixes a few bugs where we weren't writing out alloc
info (on new filesystems, and new devices) and should have been.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
printbufs know how big the buffer is that was allocated, so we can get
rid of the random PAGE_SIZEs all over the place.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This solves internal fragmentation within stripes. We already have
copygc, which evacuates buckets that are partially or mostly empty, but
it's up to the ec code that manages stripes to deal with stripes that
have empty buckets in them.
This patch changes the path for creating new stripes to check if there's
existing stripes with empty buckets - and if so, update them with new
data buckets instead of creating new stripes.
TODO: improve the disk space accounting so that we can only use this
(more expensive path) when we have too much fragmentation in existing
stripes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Prep work for the patch to update existing stripes with new data blocks.
This moves allocating new stripes into ec.c, and also sets up the data
structures so that we can handly only allocating some of the blocks in a
stripe.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is mainly to solve a lock ordering issue, and also simplifies the
code a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Soon we'll be able to modify existing stripes - replacing empty blocks
with new blocks and new p/q blocks. This patch updates the trigger code
to handle pointers changing in an existing stripe; also, it
significantly improves how the stripes heap works, which means we can
get rid of the stripe creation/deletion lock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When updates to interior nodes started being journalled, that meant that
after an unclean shutdown, until journal replay is done we can't walk
the btree without overlaying the updates from the journal.
The initial btree gc was changed to walk the btree overlaying keys from
the journal - but bch2_alloc_read() and bch2_stripes_read() were missed.
Major whoops...
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_ptr_swab was never updated when the code for generic keys with
pointers was added - it assumed the entire val was only used for
pointers.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet