If KUnit is built as a module, and it's unloaded, the kunit_bus is not
unregistered. This causes an error if it's then re-loaded later, as we
try to re-register the bus.
Unregister the bus and root_device on shutdown, if it looks valid.
In addition, be more specific about the value of kunit_bus_device. It
is:
- a valid struct device* if the kunit_bus initialised correctly.
- an ERR_PTR if it failed to initialise.
- NULL before initialisation and after shutdown.
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 2810c1e998 ("kunit: Fix wild-memory-access bug in
kunit_free_suite_set()") fixed a wild-memory-access bug that could have
happened during the loading phase of test suites built and executed as
loadable modules. However, it also introduced a problematic side effect
that causes test suites modules to crash when they attempt to register
fake devices.
When a module is loaded, it traverses the MODULE_STATE_UNFORMED and
MODULE_STATE_COMING states before reaching the normal operating state
MODULE_STATE_LIVE. Finally, when the module is removed, it moves to
MODULE_STATE_GOING before being released. However, if the loading
function load_module() fails between complete_formation() and
do_init_module(), the module goes directly from MODULE_STATE_COMING to
MODULE_STATE_GOING without passing through MODULE_STATE_LIVE.
This behavior was causing kunit_module_exit() to be called without
having first executed kunit_module_init(). Since kunit_module_exit() is
responsible for freeing the memory allocated by kunit_module_init()
through kunit_filter_suites(), this behavior was resulting in a
wild-memory-access bug.
Commit 2810c1e998 ("kunit: Fix wild-memory-access bug in
kunit_free_suite_set()") fixed this issue by running the tests when the
module is still in MODULE_STATE_COMING. However, modules in that state
are not fully initialized, lacking sysfs kobjects. Therefore, if a test
module attempts to register a fake device, it will inevitably crash.
This patch proposes a different approach to fix the original
wild-memory-access bug while restoring the normal module execution flow
by making kunit_module_exit() able to detect if kunit_module_init() has
previously initialized the tests suite set. In this way, test modules
can once again register fake devices without crashing.
This behavior is achieved by checking whether mod->kunit_suites is a
virtual or direct mapping address. If it is a virtual address, then
kunit_module_init() has allocated the suite_set in kunit_filter_suites()
using kmalloc_array(). On the contrary, if mod->kunit_suites is still
pointing to the original address that was set when looking up the
.kunit_test_suites section of the module, then the loading phase has
failed and there's no memory to be freed.
v4:
- rebased on 6.8
- noted that kunit_filter_suites() must return a virtual address
v3:
- add a comment to clarify why the start address is checked
v2:
- add include <linux/mm.h>
Fixes: 2810c1e998 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()")
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Rae Moar <rmoar@google.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The root_device_register() function does not return NULL, it returns
error pointers. Fix the check to match.
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit_device_register() function doesn't return NULL, it returns
error pointers. Change the KUNIT_ASSERT_NOT_NULL() to check for
ERR_OR_NULL().
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The KUnit device helpers are documented with kerneldoc in their header
file, but also have short comments over their implementation. These were
mistakenly formatted as kerneldoc comments, even though they're not
valid kerneldoc. It shouldn't cause any serious problems -- this file
isn't included in the docs -- but it could be confusing, and causes
warnings.
Remove the extra '*' so that these aren't treated as kerneldoc.
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312181920.H4EPAH20-lkp@intel.com/
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Adds a variant of example_static_stub_test() that shows use of a
pointer-to-function with kunit_activate_static_stub().
A const pointer to the add_one() function is declared. This
pointer-to-function is passed to kunit_activate_static_stub() and
kunit_deactivate_static_stub() instead of passing add_one directly.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
suite->log must be checked for NULL before passing it to
string_stream_clear(). This was done in kunit_init_test() but was missing
from kunit_init_suite().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 6d696c4695c5 ("kunit: add ability to run tests after boot using debugfs")
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: David Gow <davidgow@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If we run parameterized test that uses test->priv to prepare some
custom data, then value of test->priv will leak to the next param
iteration and may be unexpected. This could be easily seen if
we promote example_priv_test to parameterized test as then only
first test iteration will be successful:
$ ./tools/testing/kunit/kunit.py run \
--kunitconfig ./lib/kunit/.kunitconfig *.example_priv*
[ ] Starting KUnit Kernel (1/1)...
[ ] ============================================================
[ ] =================== example (1 subtest) ====================
[ ] ==================== example_priv_test ====================
[ ] [PASSED] example value 3
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ] test->priv == 0000000060dfe290
[ ] ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 2
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ] test->priv == 0000000060dfe290
[ ] ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 1
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ] test->priv == 0000000060dfe290
[ ] ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 0
[ ] # example_priv_test: initializing
[ ] # example_priv_test: cleaning up
[ ] # example_priv_test: pass:1 fail:3 skip:0 total:4
[ ] ================ [FAILED] example_priv_test ================
[ ] # example: initializing suite
[ ] # module: kunit_example_test
[ ] # example: exiting suite
[ ] # Totals: pass:1 fail:3 skip:0 total:4
[ ] ===================== [FAILED] example =====================
Fix that by resetting test->priv after each param iteration, in
similar way what we did for the test->status.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In a test->priv field the user can store arbitrary data.
Add example how to use this feature in the test code.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Tests for drivers often require a struct device to pass to other
functions. While it's possible to create these with
root_device_register(), or to use something like a platform device, this
is both a misuse of those APIs, and can be difficult to clean up after,
for example, a failed assertion.
Add some KUnit-specific functions for registering and unregistering a
struct device:
- kunit_device_register()
- kunit_device_register_with_driver()
- kunit_device_unregister()
These helpers allocate a on a 'kunit' bus which will either probe the
driver passed in (kunit_device_register_with_driver), or will create a
stub driver (kunit_device_register) which is cleaned up on test shutdown.
Devices are automatically unregistered on test shutdown, but can be
manually unregistered earlier with kunit_device_unregister() in order
to, for example, test device release code.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add functionality to run built-in tests after boot by writing to a
debugfs file.
Add a new debugfs file labeled "run" for each test suite to use for
this purpose.
As an example, write to the file using the following:
echo "any string" > /sys/kernel/debugfs/kunit/<testsuite>/run
This will trigger the test suite to run and will print results to the
kernel log.
To guard against running tests concurrently with this feature, add a
mutex lock around running kunit. This supports the current practice of
not allowing tests to be run concurrently on the same kernel.
This new functionality could be used to design a parameter
injection feature in the future.
Fixed up merge conflict duing rebase to Linux 6.7-rc6
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add is_init test attribute of type bool. Add to_string, get, and filter
methods to lib/kunit/attributes.c.
Mark each of the tests in the init section with the is_init=true attribute.
Add is_init to the attributes documentation.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add example_init_test_suite to allow for testing the feature of running
test suites marked as init to indicate they use init data and/or
functions.
This suite should always pass and uses a simple init function.
This suite can also be used to test the is_init attribute introduced in
the next patch.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add KUNIT_INIT_TABLE to the INIT_DATA linker section.
Alter the KUnit macros to create init tests:
kunit_test_init_section_suites
Update lib/kunit/executor.c to run both the suites in KUNIT_TABLE and
KUNIT_INIT_TABLE.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kunit_debugfs_create_suite() give up and skip creating the debugfs
file if any of the alloc_string_stream() calls return an error or NULL.
Only put a value in the log pointer of kunit_suite and kunit_test if it
is a valid pointer to a log.
This prevents the potential invalid dereference reported by smatch:
lib/kunit/debugfs.c:115 kunit_debugfs_create_suite() error: 'suite->log'
dereferencing possible ERR_PTR()
lib/kunit/debugfs.c:119 kunit_debugfs_create_suite() error: 'test_case->log'
dereferencing possible ERR_PTR()
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 05e2006ce4 ("kunit: Use string_stream for test log")
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Move the call to kunit_suite_has_succeeded() after the check that
the kunit_suite pointer is valid.
This was found by smatch:
lib/kunit/debugfs.c:66 debugfs_print_results() warn: variable
dereferenced before check 'suite' (see line 63)
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 38289a26e1 ("kunit: fix debugfs code to use enum kunit_status, not bool")
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Check the stream pointer passed to string_stream_destroy() for
IS_ERR_OR_NULL() instead of only NULL.
Whatever alloc_string_stream() returns should be safe to pass
to string_stream_destroy(), and that will be an ERR_PTR.
It's obviously good practise and generally helpful to also check
for NULL pointers so that client cleanup code can call
string_stream_destroy() unconditionally - which could include
pointers that have never been set to anything and so are NULL.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Passing a gfp_t to KUNIT_EXPECT_EQ() causes a cast warning:
lib/kunit/string-stream-test.c:73:9: sparse: sparse: incorrect type in
initializer (different base types) expected long long right_value
got restricted gfp_t const __right
Avoid this by testing stream->gfp for the expected value and passing the
boolean result of this comparison to KUNIT_EXPECT_TRUE(), as was already
done a few lines above in string_stream_managed_init_test().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: d1a0d699bf ("kunit: string-stream: Add tests for freeing resource-managed string_stream")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311181918.0mpCu2Xh-lkp@intel.com/
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit's deferred action API accepts a void(*)(void *) function pointer
which is called when the test is exited. However, we very frequently
want to use existing functions which accept a single pointer, but which
may not be of type void*. While this is probably dodgy enough to be on
the wrong side of the C standard, it's been often used for similar
callbacks, and gcc's -Wcast-function-type seems to ignore cases where
the only difference is the type of the argument, assuming it's
compatible (i.e., they're both pointers to data).
However, clang 16 has introduced -Wcast-function-type-strict, which no
longer permits any deviation in function pointer type. This seems to be
because it'd break CFI, which validates the type of function calls.
This rather ruins our attempts to cast functions to defer them, and
leaves us with a few options. The one we've chosen is to implement a
macro which will generate a wrapper function which accepts a void*, and
casts the argument to the appropriate type.
For example, if you were trying to wrap:
void foo_close(struct foo *handle);
you could use:
KUNIT_DEFINE_ACTION_WRAPPER(kunit_action_foo_close,
foo_close,
struct foo *);
This would create a new kunit_action_foo_close() function, of type
kunit_action_t, which could be passed into kunit_add_action() and
similar functions.
In addition to defining this macro, update KUnit and its tests to use
it.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kunit_log_test() pass the kfree_wrapper() function to kunit_add_action()
instead of directly passing kfree().
This prevents a cast warning:
lib/kunit/kunit-test.c:565:25: warning: cast from 'void (*)(const void *)'
to 'kunit_action_t *' (aka 'void (*)(void *)') converts to incompatible
function type [-Wcast-function-type-strict]
564 full_log = string_stream_get_string(test->log);
> 565 kunit_add_action(test, (kunit_action_t *)kfree, full_log);
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311070041.kWVYx7YP-lkp@intel.com/
Fixes: 05e2006ce4 ("kunit: Use string_stream for test log")
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Today we reset the suite counter as part of the suite cleanup,
called from the module exit callback, but it might not work that
well as one can try to collect results without unloading a previous
test (either unintentionally or due to dependencies).
For easy reproduction try to load the kunit-test.ko and then
collect and parse results from the kunit-example-test.ko load.
Parser will complain about mismatch of expected test number:
[ ] KTAP version 1
[ ] 1..1
[ ] # example: initializing suite
[ ] KTAP version 1
[ ] # Subtest: example
..
[ ] # example: pass:5 fail:0 skip:4 total:9
[ ] # Totals: pass:6 fail:0 skip:6 total:12
[ ] ok 7 example
[ ] [ERROR] Test: example: Expected test number 1 but found 7
[ ] ===================== [PASSED] example =====================
[ ] ============================================================
[ ] Testing complete. Ran 12 tests: passed: 6, skipped: 6, errors: 1
Since we are now printing suite test plan on every module load,
right before running suite tests, we should make sure that suite
counter will also start from 1. Easiest solution seems to be move
counter reset to the __kunit_test_suites_init() function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Kunit recently gained support to setup attributes, the first one being
the speed of a given test, then allowing to filter out slow tests.
A slow test is defined in the documentation as taking more than one
second. There's an another speed attribute called "super slow" but whose
definition is less clear.
Add support to the test runner to check the test execution time, and
report tests that should be marked as slow but aren't.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the outer layer for loop is iterated more than once and it fails not
in the first iteration, the filtered_suite and filtered_suite->test_cases
allocated in the last kunit_filter_attr_tests() in last inner for loop
is leaked.
So add a new free_filtered_suite err label and free the filtered_suite
and filtered_suite->test_cases so far. And change kmalloc_array of copy
to kcalloc to Clear the copy to make the kfree safe.
Fixes: 529534e8cb ("kunit: Add ability to filter attributes")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the outer layer for loop is iterated more than once and it fails not
in the first iteration, the copy pointer has been moved. So it should free
the original copy's backup copy_start.
Fixes: abbf73816b ("kunit: fix possible memory leak in kunit_filter_suites()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If we skip one parametrized test case then test status remains
SKIP for all subsequent test params leading to wrong reports:
$ ./tools/testing/kunit/kunit.py run \
--kunitconfig ./lib/kunit/.kunitconfig *.example_params*
--raw_output \
[ ] Starting KUnit Kernel (1/1)...
KTAP version 1
1..1
# example: initializing suite
KTAP version 1
# Subtest: example
# module: kunit_example_test
1..1
KTAP version 1
# Subtest: example_params_test
# example_params_test: initializing
# example_params_test: cleaning up
ok 1 example value 3 # SKIP unsupported param value 3
# example_params_test: initializing
# example_params_test: cleaning up
ok 2 example value 2 # SKIP unsupported param value 3
# example_params_test: initializing
# example_params_test: cleaning up
ok 3 example value 1 # SKIP unsupported param value 3
# example_params_test: initializing
# example_params_test: cleaning up
ok 4 example value 0 # SKIP unsupported param value 0
# example_params_test: pass:0 fail:0 skip:4 total:4
ok 1 example_params_test # SKIP unsupported param value 0
# example: exiting suite
ok 1 example # SKIP
Reset test status and status comment after each param iteration
to avoid using stale results.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a test of the speed and memory use of string_stream.
string_stream_performance_test() doesn't actually "test" anything (it
cannot fail unless the system has run out of allocatable memory) but it
measures the speed and memory consumption of the string_stream and reports
the result.
This allows changes in the string_stream implementation to be compared.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Replace the fixed-size log buffer with a string_stream so that the
log can grow as lines are added.
The existing kunit log tests have been updated for using a
string_stream as the log. No new test have been added because there
are already tests for the underlying string_stream.
As the log tests now depend on string_stream functions they cannot
build when kunit-test is a module. They have been surrounded by
a #if to replace them with skipping version when the test is
build as a module. Though this isn't pretty, it avoids moving
code to another file while that code is also being changed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
string_stream_managed_free_test() allocates a resource-managed
string_stream and tests that kunit_free_string_stream() calls
string_stream_destroy().
string_stream_resource_free_test() allocates a resource-managed
string_stream and tests that string_stream_destroy() is called
when the test resources are cleaned up.
The old string_stream_init_test() has been split into two tests,
one for kunit_alloc_string_stream() and the other for
alloc_string_stream().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Re-work string_stream so that it is not tied to a struct kunit. This is
to allow using it for the log of struct kunit_suite.
Instead of resource-managing individual allocations the whole string_stream
can be resource-managed, if required.
alloc_string_stream() now allocates a string stream that is
not resource-managed.
string_stream_destroy() now works on an unmanaged string_stream
allocated by alloc_string_stream() and frees the entire
string_stream (previously it only freed the fragments).
string_stream_clear() has been made public for callers that
want to free the fragments without destroying the string_stream.
For resource-managed allocations use kunit_alloc_string_stream()
and kunit_free_string_stream().
In addition to this, string_stream_get_string() now returns an
unmanaged buffer that the caller must kfree().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add function kunit_alloc_string_stream() to do a resource-managed
allocation of a string stream, and corresponding
kunit_free_string_stream() to free the resource-managed stream.
This is preparing for decoupling the string_stream
implementation from struct kunit, to reduce the amount of code
churn when that happens. Currently:
- kunit_alloc_string_stream() only calls alloc_string_stream().
- kunit_free_string_stream() takes a struct kunit* which
isn't used yet.
Callers of the old alloc_string_stream() and
string_stream_destroy() are all requesting a managed allocation
so have been changed to use the new functions.
alloc_string_stream() has been temporarily made static because
its current behavior has been replaced with
kunit_alloc_string_stream().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There is no need to use a test-managed alloc in is_literal().
The function frees the temporary buffer before returning.
This removes the only use of the test and gfp members of
struct string_stream outside of the string_stream implementation.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add test cases for testing the string_stream feature that appends a
newline to strings that do not already end with a newline.
string_stream_no_auto_newline_test() tests with this feature disabled.
Newlines should not be added or dropped.
string_stream_auto_newline_test() tests with this feature enabled.
Newlines should be added to lines that do not end with a newline.
string_stream_append_auto_newline_test() tests appending the
content of one stream to another stream when the target stream
has newline appending enabled.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add an optional feature to string_stream that will append a newline to
any added string that does not already end with a newline. The purpose
of this is so that string_stream can be used to collect log lines.
This is enabled/disabled by calling string_stream_set_append_newlines().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Replace the minimal tests with more-thorough testing.
string_stream_init_test() tests that struct string_stream is
initialized correctly.
string_stream_line_add_test() adds a series of numbered lines and
checks that the resulting string contains all the lines.
string_stream_variable_length_line_test() adds a large number of
lines of varying length to create many fragments, then tests that all
lines are present.
string_stream_append_test() tests various cases of using
string_stream_append() to append the content of one stream to another.
Adds string_stream_append_empty_string_test() to test that adding an
empty string to a string_stream doesn't create a new empty fragment.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the result of the formatted string is an empty string just return
instead of creating an empty fragment.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If both filter_glob and filters are not NULL, and kunit_parse_glob_filter()
succeed, but kcalloc parsed_filters fails, the suite_glob and test_glob of
parsed kzalloc in kunit_parse_glob_filter() will be leaked.
As Rae suggested, assign -ENOMEM to *err to correctly free copy and goto
free_parsed_glob to free the suite/test_glob of parsed.
Fixes: 1c9fd080df ("kunit: fix uninitialized variables bug in attributes filtering")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Take the last kfree(parsed_filters) and add it to be the first. Take
the first kfree(copy) and add it to be the last. The Best practice is to
return these errors reversely.
And as David suggested, add several labels which target only the things
which actually have been allocated so far.
Fixes: 529534e8cb ("kunit: Add ability to filter attributes")
Fixes: abbf73816b ("kunit: fix possible memory leak in kunit_filter_suites()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Suggested-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit's attribute filtering feature needs the filter strings passed in
to be writable, as it modifies them in-place during parsing. This works
for the filters passed on the kernel command line, but the string
literals used in the executor tests are at least theoretically read-only
(though they work on x86_64 for some reason). s390 wasn't fooled, and
crashed when these tests were run.
Use a 'char[]' instead, (and make an explicit variable for the current
filter in parse_filter_attr_test), which will store the string in a
writable segment.
Fixes: 76066f93f1 ("kunit: add tests for filtering attributes")
Closes: https://lore.kernel.org/linux-kselftest/55950256-c00a-4d21-a2c0-cf9f0e5b8a9a@roeck-us.net/
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add parameter descriptions to struct kunit_attr header for the
parameters attr_default and print.
Fixes: 39e92cb1e4 ("kunit: Add test attributes API structure")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308180127.VD7YRPGa-lkp@intel.com/
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
External tools, e.g., Intel GPU tools (IGT), support execution of
individual selftests provided by kernel modules. That could be also
applicable to kunit test modules if they provided test filtering. But
test filtering is now possible only when kunit code is built into the
kernel. Moreover, a filter can be specified only at boot time, then
reboot is required each time a different filter is needed.
Build the test filtering code also when kunit is configured as a module,
expose test filtering functions to other kunit source files, and use them
in kunit module notifier callback functions. Userspace can then reload
the kunit module with a value of the filter_glob parameter tuned to a
specific kunit test module every time it wants to limit the scope of tests
executed on that module load. Make the kunit.filter* parameters visible
in sysfs for user convenience.
v5: Refresh on tpp of attributes filtering fix
v4: Refresh on top of newly applied attributes patches and changes
introdced by new versions of other patches submitted in series with
this one.
v3: Fix CONFIG_GLOB, required by filtering functions, not selected when
building as a module (lkp@intel.com).
v2: Fix new name of a structure moved to kunit namespace not updated
across all uses (lkp@intel.com).
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Results from kunit tests reported via dmesg may be interleaved with other
kernel messages. When parsing dmesg for modular kunit results in real
time, external tools, e.g., Intel GPU tools (IGT), may want to insert
their own test name markers into dmesg at the start of each test, before
any kernel message related to that test appears there, so existing upper
level test result parsers have no doubt which test to blame for a specific
kernel message. Unfortunately, kunit reports names of tests only at their
completion (with the exeption of a not standarized "# Subtest: <name>"
header above a test plan of each test suite or parametrized test).
External tools could be able to insert their own "start of the test"
markers with test names included if they new those names in advance.
Test names could be learned from a list if provided by a kunit test
module.
There exists a feature of listing kunit tests without actually executing
them, but it is now limited to configurations with the kunit module built
in and covers only built-in tests, already available at boot time.
Moreover, switching from list to normal mode requires reboot. If that
feature was also available when kunit is built as a module, userspace
could load the module with action=list parameter, load some kunit test
modules they are interested in and learn about the list of tests provided
by those modules, then unload them, reload the kunit module in normal mode
and execute the tests with their lists already known.
Extend kunit module notifier initialization callback with a processing
path for only listing the tests provided by a module if the kunit action
parameter is set to "list" or "list_attr". For user convenience, make the
kunit.action parameter visible in sysfs.
v2: Don't use a different format, use kunit_exec_list_tests() (Rae),
- refresh on top of new attributes patches, handle newly introduced
kunit.action=list_attr case (Rae).
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
According to KTAP specification[1], results should always start from a
header that provides a TAP protocol version, followed by a test plan with
a count of items to be executed. That pattern should be followed at each
nesting level. In the current implementation of the top-most, i.e., test
suite level, those rules apply only for test suites built into the kernel,
executed and reported on boot. Results submitted to dmesg from kunit test
modules loaded later are missing those top-level headers.
As a consequence, if a kunit test module provides more than one test suite
then, without the top level test plan, external tools that are parsing
dmesg for kunit test output are not able to tell how many test suites
should be expected and whether to continue parsing after complete output
from the first test suite is collected.
Submit the top-level headers also from the kunit test module notifier
initialization callback.
v3: Fix new name of a structure moved to kunit namespace not updated in
executor_test functions (lkp@intel.com).
v2: Use kunit_exec_run_tests() (Mauro, Rae), but prevent it from
emitting the headers when called on load of non-test modules.
[1] https://docs.kernel.org/dev-tools/ktap.html#
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix smatch warnings regarding uninitialized variables in the filtering
patch of the new KUnit Attributes feature.
Fixes: 529534e8cb ("kunit: Add ability to filter attributes")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202307270610.s0w4NKEn-lkp@intel.com/
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add four tests to executor_test.c to test behavior of filtering attributes.
- parse_filter_attr_test - to test the parsing of inputted filters
- filter_attr_test - to test the filtering procedure on attributes
- filter_attr_empty_test - to test the behavior when all tests are filtered
out
- filter_attr_skip_test - to test the configurable filter_action=skip
option
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David Gow