A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
similar symbols that are no longer available with the platform gone,
though the drivers themselves are still used on newer platforms,
so remove these hacks.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support for all the dm3xx/dm64xx SoCs is no longer
available, so drop all other references to those.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top to
make sure it doesn't break so easily again. The majority of the series
fixes up how the clk_set_rate_*() APIs work, particularly around when
the rate constraints are dropped and how they move around when
reparenting clks. Overall it's a much needed improvement to the clk rate
range APIs that used to be pretty broken if you looked sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that the
system actually boots on the affected devices.
-----BEGIN PGP SIGNATURE-----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=ZG8Y
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top
to make sure it doesn't break so easily again. The majority of the
series fixes up how the clk_set_rate_*() APIs work, particularly
around when the rate constraints are dropped and how they move around
when reparenting clks. Overall it's a much needed improvement to the
clk rate range APIs that used to be pretty broken if you looked
sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that
the system actually boots on the affected devices"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
clk: tegra: Fix Tegra PWM parent clock
clk: at91: fix the build with binutils 2.27
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
...
These are three fixes for build warnings that came in during the
merge window.
-----BEGIN PGP SIGNATURE-----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=HTmF
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are three fixes for build warnings that came in during the merge
window"
* tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: mmp: Make some symbols static
ARM: spear6xx: Staticize few definitions
clk: spear: Move prototype to accessible header
There is an issue when build with older versions of binutils 2.27.0,
arch/arm/mach-at91/pm_suspend.S: Assembler messages:
arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL'
Use UL() macro to fix the issue in assembly file.
Fixes: 4fd36e4583 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20221012030635.13140-1-wangkefeng.wang@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/clk/spear/spear6xx_clock.c:116:13: warning: no previous prototype for function 'spear6xx_clk_init' [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 7dd3376448 ("ARM: davinci: Delete DM644x board files") and commit
b4aed01de4 ("ARM: davinci: Delete DM646x board files") removes the
support for DaVinci DM644x and DM646x boards.
Hence, remove the PLL and PSC clock descriptions for those boards as well.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220720082934.17741-1-lukas.bulwahn@gmail.com
Reviewed-by: David Lechner <david@lechnology.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license version 2 as
published by the free software foundation this program is distributed
as is without any warranty of any kind whether express or implied
without even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The clock register definitions are now used (almost) exclusively in the
clk driver, and that relies on no other mach/*.h header files any more.
Remove the dependency on mach/pxa*-regs.h by addressing the registers
as offsets from a void __iomem * pointer, which is either passed from
a board file, or (for the moment) ioremapped at boot time from a hardcoded
address in case of DT (this should be moved into the DT of course).
Cc: linux-clk@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver needs some low-level register access for setting
the core and bus frequencies. These registers are owned
by the clk driver, so move the low-level access into that
driver with a slightly higher-level interface and avoid
any machine header file dependencies.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Subsystem:
- remove uie_unsupported, all users have been converted to clear
RTC_FEATURE_UPDATE_INTERRUPT and provide a reason
- RTCs with an alarm with a resolution of a minute are now letting the core
handle rounding down the alarm time
- fix use-after-free on device removal
New driver:
- OP-TEE RTC PTA
Drivers:
- sun6i: Add H616 support
- cmos: Fix the AltCentury for AMD platforms
- spear: set range
-----BEGIN PGP SIGNATURE-----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=7E0a
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The bulk of the patches are about replacing the uie_unsupported struct
rtc_device member by a feature bit.
Subsystem:
- remove uie_unsupported, all users have been converted to clear
RTC_FEATURE_UPDATE_INTERRUPT and provide a reason
- RTCs with an alarm with a resolution of a minute are now letting
the core handle rounding down the alarm time
- fix use-after-free on device removal
New driver:
- OP-TEE RTC PTA
Drivers:
- sun6i: Add H616 support
- cmos: Fix the AltCentury for AMD platforms
- spear: set range"
* tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (56 commits)
rtc: check if __rtc_read_time was successful
rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram
rtc: mc146818-lib: Fix the AltCentury for AMD platforms
rtc: optee: add RTC driver for OP-TEE RTC PTA
rtc: pm8xxx: Return -ENODEV if set_time disallowed
rtc: pm8xxx: Attach wake irq to device
clk: sunxi-ng: sun6i-rtc: include clk/sunxi-ng.h
rtc: remove uie_unsupported
rtc: xgene: stop using uie_unsupported
rtc: hym8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
rtc: hym8563: let the core handle the alarm resolution
rtc: hym8563: switch to devm_rtc_allocate_device
rtc: efi: switch to RTC_FEATURE_UPDATE_INTERRUPT
rtc: efi: switch to devm_rtc_allocate_device
rtc: add new RTC_FEATURE_ALARM_WAKEUP_ONLY feature
rtc: spear: fix spear_rtc_read_time
rtc: spear: drop uie_unsupported
rtc: spear: set range
rtc: spear: switch to devm_rtc_allocate_device
rtc: pcf8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
...
The RTC power domain in sun6i and newer SoCs manages the 16 MHz RC
oscillator (called "IOSC" or "osc16M") and the optional 32 kHz crystal
oscillator (called "LOSC" or "osc32k"). Starting with the H6, this power
domain also handles the 24 MHz DCXO (called variously "HOSC", "dcxo24M",
or "osc24M") as well. The H6 also adds a calibration circuit for IOSC.
Later SoCs introduce further variations on the design:
- H616 adds an additional mux for the 32 kHz fanout source.
- R329 adds an additional mux for the RTC timekeeping clock, a clock
for the SPI bus between power domains inside the RTC, and removes the
IOSC calibration functionality.
Take advantage of the CCU framework to handle this increased complexity.
This driver is intended to be a drop-in replacement for the existing RTC
clock provider. So some runtime adjustment of the clock parents is
needed, both to handle hardware differences, and to support the old
binding which omitted some of the input clocks.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220203021736.13434-6-samuel@sholland.org
Add CPU idle support for SAMA7G5. Support will make use of PMC_CPU_RATIO
register to divide the CPU clock by 16 before switching it to idle and
use automatic self-refresh option of DDR controller.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-5-claudiu.beznea@microchip.com
Like the individual CCU drivers, it can be beneficial for memory
consumption of cross-platform configurations to only load the CCU core
on the relevant platform. For example, a generic arm64 kernel sees the
following improvement when building the CCU core and drivers as modules:
before:
text data bss dec hex filename
13882360 5251670 360800 19494830 12977ae vmlinux
after:
text data bss dec hex filename
13734787 5086442 360800 19182029 124b1cd vmlinux
So the result is a 390KB total reduction in kernel image size.
The one early clock provider (sun5i) requires the core to be built in.
Now that loading the MMC driver will trigger loading the CCU core, the
MMC timing mode functions do not need a compile-time fallback.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211119033338.25486-5-samuel@sholland.org
Add register definitions for SAMA7G5's master clock. These would be
also used by architecture specific power saving code.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210719080317.1045832-3-claudiu.beznea@microchip.com
The patch enables spread spectrum clocking (SSC) for MPU and LCD PLLs.
As reported by the TI spruh73x/spruhl7x RM, SSC is only supported for
the DISP/LCD and MPU PLLs on am33xx/am43xx. SSC is not supported for
DDR, PER, and CORE PLLs.
Calculating the required values and setting the registers accordingly
was taken from the set_mpu_spreadspectrum routine contained in the
arch/arm/mach-omap2/am33xx/clock_am33xx.c file of the u-boot project.
In locked condition, DPLL output clock = CLKINP *[M/N]. In case of
SSC enabled, the reference manual explains that there is a restriction
of range of M values. Since the omap2_dpll_round_rate routine attempts
to select the minimum possible N, the value of M obtained is not
guaranteed to be within the range required. With the new "ti,min-div"
parameter it is possible to increase N and consequently M to satisfy the
constraint imposed by SSC.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210606202253.31649-6-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
PLLE has a hardware power sequencer logic which is a state machine
that can power on/off PLLE without any software intervention. The
sequencer has two inputs, one from XUSB UPHY PLL and the other from
SATA UPHY PLL. PLLE provides reference clock to XUSB and SATA UPHY
PLLs. When both of the downstream PLLs are powered-off, PLLE hardware
power sequencer will automatically power off PLLE for power saving.
XUSB and SATA UPHY PLLs also have their own hardware power sequencer
logic. XUSB UPHY PLL is shared between XUSB SuperSpeed ports and PCIE
controllers. The XUSB UPHY PLL hardware power sequencer has inputs
from XUSB and PCIE. When all of the XUSB SuperSpeed ports and PCIE
controllers are in low power state, XUSB UPHY PLL hardware power
sequencer automatically power off PLL and flags idle to PLLE hardware
power sequencer. Similar applies to SATA UPHY PLL.
PLLE hardware power sequencer has to be enabled after both downstream
sequencers are enabled.
This commit adds two helper functions:
1. tegra210_plle_hw_sequence_start() for XUSB PADCTL driver to enable
PLLE hardware sequencer at proper time.
2. tegra210_plle_hw_sequence_is_enabled() for XUSB PADCTL driver to
check whether PLLE hardware sequencer has been enabled or not.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
clk drivers that dominate the diffstat because we add support for six SoCs from
that particular vendor. The other big change is the removal of various clk
drivers that are no longer used now that the kernel is dropping support for
those SoCs. Beyond that there's the usual non-critical fixes for existing
drivers and a good number of patches from Lee Jones that cleanup a bunch of W=1
enabled builds.
Removed Drivers:
- Remove efm32 clk driver
- Remove tango4 clk driver
- Remove zte zx clk driver
- Remove sirf prima2/atlast clk drivers
- Remove u300 clk driver
New Drivers:
- PLL support on MStar/SigmaStar ARMv7 SoCs
- CPU clks for Qualcomm SDX55
- GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
- GCC clks for Qualcomm SM8350
- GPU clks for Qualcomm SDM660/SDM630
Updates:
- Video clk fixups on Qualcomm SM8250
- Improvements for multimedia clks on Qualcomm MSM8998
- Fix many warnings with W=1 enabled builds under drivers/clk/
- Support crystal load capacitance for Versaclock VC5
- Add a "skip recall" DT binding for Silicon Labs' si570 to avoid glitches at boot
- Convert Xilinx VCU clk driver to a proper clk provider driver
- Expose Xilinx ZynqMP clk driver to more platforms
- Amlogic pll driver fixup
- Amlogic meson8b clock controller dt support clean up
- Remove mipi clk from the Amlogic axg clock controller
- New Rockchip rk3368 clock ids related to camera input
- Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk reparenting
- A series from Liu Ying that adds some SCU clocks support for i.MX8qxp
DC0/MIPI-LVDS subsystems
- A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ, and
clkout1/2 support for i.MX8MM/MN
- Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
- Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
- Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
(HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
(SYS-DMAC) clocks on Renesas R-Car V3U
- Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
- Allwinner H616 SoC clk support
-----BEGIN PGP SIGNATURE-----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=dDCt
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is all driver updates, the majority of which is a bunch of new
Qualcomm clk drivers that dominate the diffstat because we add support
for six SoCs from that particular vendor.
The other big change is the removal of various clk drivers that are no
longer used now that the kernel is dropping support for those SoCs.
Beyond that there's the usual non-critical fixes for existing drivers
and a good number of patches from Lee Jones that cleanup a bunch of
W=1 enabled builds.
Removed Drivers:
- Remove efm32 clk driver
- Remove tango4 clk driver
- Remove zte zx clk driver
- Remove sirf prima2/atlast clk drivers
- Remove u300 clk driver
New Drivers:
- PLL support on MStar/SigmaStar ARMv7 SoCs
- CPU clks for Qualcomm SDX55
- GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
- GCC clks for Qualcomm SM8350
- GPU clks for Qualcomm SDM660/SDM630
Updates:
- Video clk fixups on Qualcomm SM8250
- Improvements for multimedia clks on Qualcomm MSM8998
- Fix many warnings with W=1 enabled builds under drivers/clk/
- Support crystal load capacitance for Versaclock VC5
- Add a "skip recall" DT binding for Silicon Labs' si570 to avoid
glitches at boot
- Convert Xilinx VCU clk driver to a proper clk provider driver
- Expose Xilinx ZynqMP clk driver to more platforms
- Amlogic pll driver fixup
- Amlogic meson8b clock controller dt support clean up
- Remove mipi clk from the Amlogic axg clock controller
- New Rockchip rk3368 clock ids related to camera input
- Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
reparenting
- A series from Liu Ying that adds some SCU clocks support for
i.MX8qxp DC0/MIPI-LVDS subsystems
- A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
and clkout1/2 support for i.MX8MM/MN
- Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
- Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
- Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
(HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
(SYS-DMAC) clocks on Renesas R-Car V3U
- Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
- Allwinner H616 SoC clk support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits)
clk: mstar: msc313-mpll: Fix format specifier
clk: mstar: Allow MStar clk drivers to be compile tested
clk: qoriq: use macros to generate pll_mask
clk: qcom: Add Global Clock controller (GCC) driver for SC7280
dt-bindings: clock: Add SC7280 GCC clock binding
clk: qcom: rpmh: Add support for RPMH clocks on SC7280
dt-bindings: clock: Add RPMHCC bindings for SC7280
clk: qcom: gcc-sm8350: add gdsc
dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
clk: qcom: gdsc: Implement NO_RET_PERIPH flag
clk: mstar: MStar/SigmaStar MPLL driver
...
Fixes the following W=1 kernel build warning(s):
drivers/clk/spear/spear1310_clock.c:385:13: warning: no previous prototype for ‘spear1310_clk_init’ [-Wmissing-prototypes]
drivers/clk/spear/spear1340_clock.c:442:13: warning: no previous prototype for ‘spear1340_clk_init’ [-Wmissing-prototypes]
Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210126124540.3320214-20-lee.jones@linaro.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/clk/imx/clk-imx6sl.c:156:6: warning: no previous prototype for ‘imx6sl_set_wait_clk’ [-Wmissing-prototypes]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add modularization support to the Tegra124 EMC driver, which now can be
compiled as a loadable kernel module.
Note that EMC clock must be registered at clk-init time, otherwise PLLM
will be disabled as unused clock at boot time if EMC driver is compiled
as a module. Hence add a prepare/complete callbacks. similarly to what is
done for the Tegra20/30 EMC drivers.
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201228154920.18846-2-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
So far all Exynos, S3C64xx and S5Pv210 clock units were selected by
respective SOC/ARCH Kconfig option. On a kernel built for selected
SoCs, this allowed to build only limited set of matching clock drivers.
However compile testing was not possible in such case as Makefile object
depends on SOC/ARCH option.
Add separate Kconfig options for each of them to be able to compile
test.
Link: https://lore.kernel.org/r/20201119164509.754851-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
The s3c2410_common_clk_init() and others are defined and used by the
clk-s3c24xx driver and also used in the mach-s3c24xx machine code. Move
the declaration to a header to fix W=1 build warnings:
drivers/clk/samsung/clk-s3c2410.c:320:13: warning: no previous prototype for 's3c2410_common_clk_init' [-Wmissing-prototypes]
320 | void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
drivers/clk/samsung/clk-s3c2412.c:205:13: warning: no previous prototype for 's3c2412_common_clk_init' [-Wmissing-prototypes]
205 | void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
drivers/clk/samsung/clk-s3c2443.c:341:13: warning: no previous prototype for 's3c2443_common_clk_init' [-Wmissing-prototypes]
341 | void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
The s3c64xx_clk_init() is defined and used by the clk-s3c64xx driver and
also used in the mach-s3c64xx machine code. Move the declaration to a
header to fix W=1 build warning:
drivers/clk/samsung/clk-s3c64xx.c:391:13: warning: no previous prototype for 's3c64xx_clk_init' [-Wmissing-prototypes]
391 | void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Add UTMI support for SAMA7G5. SAMA7G5's UTMI control is done via
XTALF register. Values written at bits 2..0 in this register
correspond to the on board crystal oscillator frequency.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-18-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add master clock support (MCK1..4) for SAMA7G5. SAMA7G5's PMC has
multiple master clocks feeding different subsystems. One of them
feeds image subsystem and is changeable based on image subsystem
needs.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-13-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The EMC clock needs to carefully coordinate with the EMC controller
programming to make sure external memory can be properly clocked. Do so
by hooking up the EMC clock with an EMC provider that will specify which
rates are supported by the EMC and provide a callback to use for setting
the clock rate at the EMC.
Based on work by Peter De Schrijver <pdeschrijver@nvidia.com>.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Export functions to allow accessing the CAR register required by EMC
clock scaling. These functions will be used to access the CAR register
as part of the scaling sequence.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move SAM9X60's PLL register offsets to PMC header so that the
definitions would also be available from arch/arm/mach-at91/pm_suspend.S.
This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
This will be used to differentiate b/w different PLLs settings to be
applied in the final/first steps of the suspend/resume process by doing
PLL specific configurations.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1579522208-19523-5-git-send-email-claudiu.beznea@microchip.com
- Make gpio gate clks propagate rate setting up to parent
* clk-gpio-flags:
clk: clk-gpio: propagate rate change to parent
* clk-tegra: (23 commits)
clk: tegra: Use match_string() helper to simplify the code
clk: tegra: Fix build error without CONFIG_PM_SLEEP
clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP
clk: tegra: Optimize PLLX restore on Tegra20/30
clk: tegra: Add suspend and resume support on Tegra210
clk: tegra: Share clk and rst register defines with Tegra clock driver
clk: tegra: Use fence_udelay() during PLLU init
clk: tegra: clk-dfll: Add suspend and resume support
clk: tegra: clk-super: Add restore-context support
clk: tegra: clk-super: Fix to enable PLLP branches to CPU
clk: tegra: periph: Add restore_context support
clk: tegra: Support for OSC context save and restore
clk: tegra: pll: Save and restore pll context
clk: tegra: pllout: Save and restore pllout context
clk: tegra: divider: Save and restore divider rate
clk: tegra: Reimplement SOR clocks on Tegra210
clk: tegra: Reimplement SOR clock on Tegra124
clk: tegra: Rename sor0_lvds to sor0_out
clk: tegra: Move SOR0 implementation to Tegra124
clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRC
...
* clk-rockchip:
clk: rockchip: protect the pclk_usb_grf as critical on px30
clk: rockchip: add video-related niu clocks as critical on px30
clk: rockchip: move px30 critical clocks to correct clock controller
clk: rockchip: Add div50 clocks for px30 sdmmc, emmc, sdio and nandc
clk: rockchip: Add div50 clock-ids for sdmmc on px30 and nandc
clk: rockchip: make clk_half_divider_ops static
* clk-sprd:
clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle()
* clk-pxa:
clk: pxa: fix one of the pxa RTC clocks
The new CPUIDLE driver uses the Tegra's CLK API and that driver won't
strictly depend on CONFIG_PM_SLEEP, hence add the required stubs in
order to allow compiling of the new driver with the CONFIG_PM_SLEEP=n.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
A proper External Memory Controller clock rounding and parent selection
functionality is required by the EMC drivers, it is not available using
the generic clock implementation because only the Memory Controller driver
is aware of what clock rates are actually available for a particular
device. EMC drivers will have to register a Tegra-specific CLK-API
callback which will perform rounding of a requested rate. EMC clock users
won't be able to request EMC clock by getting -EPROBE_DEFER until EMC
driver is probed and the callback is set up.
The functionality is somewhat similar to the clk-emc.c which serves
Tegra124+ SoCs. The later HW generations support more parent clock sources
and the HW configuration / integration with the EMC drivers differs a tad
from the older gens, hence it's not really worth to try to squash
everything into a single source file.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Standby status is provided for certain clkctrl clocks to see if the
given module has entered standby or not. This is mostly needed by
remoteproc code to see if the remoteproc has entered standby and the clock
can be turned off safely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 228 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
