mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-30 08:02:30 +00:00
351 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Arnaldo Carvalho de Melo
|
15ca35494e |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes from these csets: |
||
|
Linus Torvalds
|
0c02183427 |
ARM:
* Clean up vCPU targets, always returning generic v8 as the preferred target
* Trap forwarding infrastructure for nested virtualization (used for traps
that are taken from an L2 guest and are needed by the L1 hypervisor)
* FEAT_TLBIRANGE support to only invalidate specific ranges of addresses
when collapsing a table PTE to a block PTE. This avoids that the guest
refills the TLBs again for addresses that aren't covered by the table PTE.
* Fix vPMU issues related to handling of PMUver.
* Don't unnecessary align non-stack allocations in the EL2 VA space
* Drop HCR_VIRT_EXCP_MASK, which was never used...
* Don't use smp_processor_id() in kvm_arch_vcpu_load(),
but the cpu parameter instead
* Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
* Remove prototypes without implementations
RISC-V:
* Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
* Added ONE_REG interface for SATP mode
* Added ONE_REG interface to enable/disable multiple ISA extensions
* Improved error codes returned by ONE_REG interfaces
* Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
* Added get-reg-list selftest for KVM RISC-V
s390:
* PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
* Guest debug fixes (Ilya)
x86:
* Clean up KVM's handling of Intel architectural events
* Intel bugfixes
* Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug
registers and generate/handle #DBs
* Clean up LBR virtualization code
* Fix a bug where KVM fails to set the target pCPU during an IRTE update
* Fix fatal bugs in SEV-ES intrahost migration
* Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
* Retry APIC map recalculation if a vCPU is added/enabled
* Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
* Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR cannot diverge from the default when TSC scaling is disabled
up related code
* Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
* Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
* Fix KVM's handling of !visible guest roots to avoid premature triple fault
injection
* Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
that is needed by external users (currently only KVMGT), and fix a variety
of issues in the process
This last item had a silly one-character bug in the topic branch that
was sent to me. Because it caused pretty bad selftest failures in
some configurations, I decided to squash in the fix. So, while the
exact commit ids haven't been in linux-next, the code has (from the
kvm-x86 tree).
Generic:
* Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
* Drop unused function declarations
Selftests:
* Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
* Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
* Clean up the PMU event filter test and add new testcases
* Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT1m0kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNgggAiN7nz6UC423FznuI+yO3TLm8tkx1
CpKh5onqQogVtchH+vrngi97cfOzZb1/AtifY90OWQi31KEWhehkeofcx7G6ERhj
5a9NFADY1xGBsX4exca/VHDxhnzsbDWaWYPXw5vWFWI6erft9Mvy3tp1LwTvOzqM
v8X4aWz+g5bmo/DWJf4Wu32tEU6mnxzkrjKU14JmyqQTBawVmJ3RYvHVJ/Agpw+n
hRtPAy7FU6XTdkmq/uCT+KUHuJEIK0E/l1js47HFAqSzwdW70UDg14GGo1o4ETxu
RjZQmVNvL57yVgi6QU38/A0FWIsWQm5IlaX1Ug6x8pjZPnUKNbo9BY4T1g==
=W+4p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
|
||
|
Paolo Bonzini
|
bd7fe98b35 |
KVM: x86: SVM changes for 6.6:
- Add support for SEV-ES DebugSwap, i.e. allow SEV-ES guests to use debug
registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
-----BEGIN PGP SIGNATURE-----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=WC5V
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.6' of https://github.com/kvm-x86/linux into HEAD
KVM: x86: SVM changes for 6.6:
- Add support for SEV-ES DebugSwap, i.e. allow SEV-ES guests to use debug
registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
|
||
|
Linus Torvalds
|
1687d8aca5 |
* Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
* Use static_calls() instead of indirect calls for apic->foo()
* Tons of cleanups an crap removal along the way
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmTvfO8ACgkQaDWVMHDJ
krAP2A//ccii/LuvtTnNEIMMR5w2rwTdHv91ancgFkC8pOeNk37Z8sSLq8tKuLFA
vgjBIysVIqunuRcNCJ+eqwIIxYfU+UGCWHppzLwO+DY3Q7o9EoTL0BgytdAqxpQQ
ntEVarqWq25QYXKFoAqbUTJ1UXa42/8HfiXAX/jvP+ACXfilkGPZre6ASxlXeOhm
XbgPuNQPmXi2WYQH9GCQEsz2Nh80hKap8upK2WbQzzJ3lXsm+xA//4klab0HCYwl
Uc302uVZozyXRMKbAlwmgasTFOLiV8KKriJ0oHoktBpWgkpdR9uv/RDeSaFR3DAl
aFmecD4k/Hqezg4yVl+4YpEn2KjxiwARCm4PMW5AV7lpWBPBHAOOai65yJlAi9U6
bP8pM0+aIx9xg7oWfsTnQ7RkIJ+GZ0w+KZ9LXFM59iu3eV1pAJE3UVyUehe/J1q9
n8OcH0UeHRlAb8HckqVm1AC7IPvfHw4OAPtUq7z3NFDwbq6i651Tu7f+i2bj31cX
77Ames+fx6WjxUjyFbJwaK44E7Qez3waztdBfn91qw+m0b+gnKE3ieDNpJTqmm5b
mKulV7KJwwS6cdqY3+Kr+pIlN+uuGAv7wGzVLcaEAXucDsVn/YAMJHY2+v97xv+n
J9N+yeaYtmSXVlDsJ6dndMrTQMmcasK1CVXKxs+VYq5Lgf+A68w=
=eoKm
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Dave Hansen:
"This includes a very thorough rework of the 'struct apic' handlers.
Quite a variety of them popped up over the years, especially in the
32-bit days when odd apics were much more in vogue.
The end result speaks for itself, which is a removal of a ton of code
and static calls to replace indirect calls.
If there's any breakage here, it's likely to be around the 32-bit
museum pieces that get light to no testing these days.
Summary:
- Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
- Use static_calls() instead of indirect calls for apic->foo()
- Tons of cleanups an crap removal along the way"
* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/apic: Turn on static calls
x86/apic: Provide static call infrastructure for APIC callbacks
x86/apic: Wrap IPI calls into helper functions
x86/apic: Mark all hotpath APIC callback wrappers __always_inline
x86/xen/apic: Mark apic __ro_after_init
x86/apic: Convert other overrides to apic_update_callback()
x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
x86/apic: Provide apic_update_callback()
x86/xen/apic: Use standard apic driver mechanism for Xen PV
x86/apic: Provide common init infrastructure
x86/apic: Wrap apic->native_eoi() into a helper
x86/apic: Nuke ack_APIC_irq()
x86/apic: Remove pointless arguments from [native_]eoi_write()
x86/apic/noop: Tidy up the code
x86/apic: Remove pointless NULL initializations
x86/apic: Sanitize APIC ID range validation
x86/apic: Prepare x2APIC for using apic::max_apic_id
x86/apic: Simplify X2APIC ID validation
x86/apic: Add max_apic_id member
x86/apic: Wrap APIC ID validation into an inline
...
|
||
|
Linus Torvalds
|
b03a434214 |
seccomp updates for v6.6-rc1
- Provide USER_NOTIFY flag for synchronous mode (Andrei Vagin, Peter Oskolkov). This touches the scheduler and perf but has been Acked by Peter Zijlstra. - Fix regression in syscall skipping and restart tracing on arm32. This touches arch/arm/ but has been Acked by Arnd Bergmann. -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmTs418WHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJohpD/4tEfRdnb/KDgwQ7uvqBonUJXcx wqw17LZCGTpBV3/Tp3+aEseD1NezOxiMJL88VyUHSy7nfDJShbL6QtyoenwEOeXJ HmBUfcIH3cqRutHEJ3drYBzBetpeeK2G+gTYVj+JoEfPWyPf+Egj+1JE2n1xLi92 WC1miBAyBZ59kN+D1hcDzJu24CkAwbcUYlEzGejN5lBOwxYV3/fjARBVRvefOO5m jljSCIVJOFgCiybKhJ7Zw1+lkFc3cIlcOgr4/ZegSc8PxFVebnuImTHHp/gvoo6F 7d1xe5Hk+PSfNvVq41MAeRB2vK2tY5efwjXRarThUaydPTO43KiQm0dzP0EYWK9a LcOg8zAXZnpvuWU5O2SqUKADcxe2TjS1WuQ/Q4ixxgKz2kJKDwrNU8Frf327eLSR acfZgMMiUfEXyXDV9B3LzNAtwdvwyxYrzEzxgKywhThIhZmQDat0rI2IaTV5QIc5 pkxiFEe0TPwpzyUVO9dSzE+ughTmNQOKk5uAM9e2NwRwVdhEmlZAxo0kStJ1NoaA yDjYIKfaNBElchL4v2931KJFJseI+uRaWdW10JEV+1M69+gEAEs6wbmAxtcYS776 xWsYp3slXzlmeVyvQp/ah8p0y55r+qTbcnhkvIdiwLYei4Bh3KOoJUlVmW0V5dKq b+7qspIvBA0kKRAqPw== =DI8R -----END PGP SIGNATURE----- Merge tag 'seccomp-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: - Provide USER_NOTIFY flag for synchronous mode (Andrei Vagin, Peter Oskolkov). This touches the scheduler and perf but has been Acked by Peter Zijlstra. - Fix regression in syscall skipping and restart tracing on arm32. This touches arch/arm/ but has been Acked by Arnd Bergmann. * tag 'seccomp-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Add missing kerndoc notations ARM: ptrace: Restore syscall skipping for tracers ARM: ptrace: Restore syscall restart tracing selftests/seccomp: Handle arm32 corner cases better perf/benchmark: add a new benchmark for seccom_unotify selftest/seccomp: add a new test for the sync mode of seccomp_user_notify seccomp: add the synchronous mode for seccomp_unotify sched: add a few helpers to wake up tasks on the current cpu sched: add WF_CURRENT_CPU and externise ttwu seccomp: don't use semaphore and wait_queue together |
||
|
Linus Torvalds
|
b4f63b0f2d |
perf tools fixes for v6.5: 3rd batch
- Revert a patch that unconditionally resolved addresses to inlines in
callchains, something that was done before when DWARF mode was asked
for, but could as well be done when just frame pointers (the default)
was selected. This enriches the callchains with inlines but the way to
resolve it is gross right now, relying on addr2line, and even if we come
up with an efficient way of processing all the associated DWARF info for
a big file as vmlinux is, this has to be something people opt-in, as it
will still result in overheads, so revert it until we get this done in a
saner way.
- Update the x86 msr-index.h header with the kernel original, no change
in tooling output, just addresses a tools/perf build warning.
- Resolve a regression where special "tool events", such as
"duration_time" were being presented for all CPUs, when it only makes
sense to show it for the workload, that is, just once.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZNP/OAAKCRCyPKLppCJ+
J7cGAQDgNpsAqGk+/Xkk7lPcp8aJ7q+5oaxv8iaGhdblq7V52gD+L2t8sNPQYWE3
sy2QQ+9tsZiONfpdxknsduxoyfE+Vgs=
=CRYB
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert a patch that unconditionally resolved addresses to inlines in
callchains, something that was done before when DWARF mode was asked
for, but could as well be done when just frame pointers (the default)
was selected.
This enriches the callchains with inlines but the way to resolve it
is gross right now, relying on addr2line, and even if we come up with
an efficient way of processing all the associated DWARF info for a
big file as vmlinux is, this has to be something people opt-in, as it
will still result in overheads, so revert it until we get this done
in a saner way.
- Update the x86 msr-index.h header with the kernel original, no change
in tooling output, just addresses a tools/perf build warning.
- Resolve a regression where special "tool events", such as
"duration_time" were being presented for all CPUs, when it only
makes sense to show it for the workload, that is, just once.
* tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Don't display zero tool counts
tools arch x86: Sync the msr-index.h copy with the kernel sources
Revert "perf report: Append inlines to non-DWARF callchains"
|
||
|
Arnaldo Carvalho de Melo
|
8cdd4aeff2 |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes from these csets:
|
||
|
Xin Li
|
6e3edb0fb5 |
tools: Get rid of IRQ_MOVE_CLEANUP_VECTOR from tools
IRQ_MOVE_CLEANUP_VECTOR is not longer in use. Remove the last traces. Signed-off-by: Xin Li <xin3.li@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230621171248.6805-4-xin3.li@intel.com |
||
|
Alexey Kardashevskiy
|
d1f85fbe83 |
KVM: SEV: Enable data breakpoints in SEV-ES
Add support for "DebugSwap for SEV-ES guests", which provides support for swapping DR[0-3] and DR[0-3]_ADDR_MASK on VMRUN and VMEXIT, i.e. allows KVM to expose debug capabilities to SEV-ES guests. Without DebugSwap support, the CPU doesn't save/load most _guest_ debug registers (except DR6/7), and KVM cannot manually context switch guest DRs due the VMSA being encrypted. Enable DebugSwap if and only if the CPU also supports NoNestedDataBp, which causes the CPU to ignore nested #DBs, i.e. #DBs that occur when vectoring a #DB. Without NoNestedDataBp, a malicious guest can DoS the host by putting the CPU into an infinite loop of vectoring #DBs (see https://bugzilla.redhat.com/show_bug.cgi?id=1278496) Set the features bit in sev_es_sync_vmsa() which is the last point when VMSA is not encrypted yet as sev_(es_)init_vmcb() (where the most init happens) is called not only when VCPU is initialised but also on intrahost migration when VMSA is encrypted. Eliminate DR7 intercepts as KVM can't modify guest DR7, and intercepting DR7 would completely defeat the purpose of enabling DebugSwap. Make X86_FEATURE_DEBUG_SWAP appear in /proc/cpuinfo (by not adding "") to let the operator know if the VM can debug. Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Link: https://lore.kernel.org/r/20230615063757.3039121-7-aik@amd.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Borislav Petkov (AMD)
|
0e52740ffd |
x86/bugs: Increase the x86 bugs vector size to two u32s
There was never a doubt in my mind that they would not fit into a single u32 eventually. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> |
||
|
Andrei Vagin
|
7d5cb68af6 |
perf/benchmark: add a new benchmark for seccom_unotify
The benchmark is similar to the pipe benchmark. It creates two processes,
one is calling syscalls, and another process is handling them via seccomp
user notifications. It measures the time required to run a specified number
of interations.
$ ./perf bench sched seccomp-notify --sync-mode --loop 1000000
# Running 'sched/seccomp-notify' benchmark:
# Executed 1000000 system calls
Total time: 2.769 [sec]
2.769629 usecs/op
361059 ops/sec
$ ./perf bench sched seccomp-notify
# Running 'sched/seccomp-notify' benchmark:
# Executed 1000000 system calls
Total time: 8.571 [sec]
8.571119 usecs/op
116670 ops/sec
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308073201.3102738-7-avagin@google.com
Link: https://lore.kernel.org/r/20230630051953.454638-1-avagin@gmail.com
[kees: Added PRIu64 format string]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
||
|
Linus Torvalds
|
4baa098a14 |
- Remove the local symbols prefix of the get/put_user() exception
handling symbols so that tools do not get confused by the presence of code belonging to the wrong symbol/not belonging to any symbol - Improve csum_partial()'s performance - Some improvements to the kcpuid tool -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmSawNoACgkQEsHwGGHe VUppXw//YezVoWUUUeTedZl8nRbotwXUlATjsIGcRGe2rZQ/7Ud/NUagWiLmKcpy fAEt+Rd0MbukCNPmTjcw04NN9djs2avVXJS3CCsGNDv/Q6AsBpMcOD4dESxbWIgh NpkNvO3bKRKxtaoJukmxiiIBlMFzXXtKg/fgzB8FeYZDhGMfS7wBlcDeJIdmWWxO T5hykFoc/47e8SPG+K/VLT8hoQCg4KPpi3aSN6n+eq8nnlosABr95JKvgqeq1mXf UPdITYzKHDiny0ZqL2nqsx1MGh24CLc3QCxi5qMDE27NVFokRdfyCiK3DVZvgrNo IA5BsiKJ0Ddeo2F1Weu+rBI7Hhf+OBZlw7WmWpqQ3rEbeEJ4L1iWeeHwrBNzyuZq ftb7OScukusaGAMamhhnErR2GwdP3SBDnnUtsue3qqPK1acYPdFfCJCqXvYsCczQ Pn6eKE2Vlp/3febce7QtZtcz7qlv60UZvj3OpYbECIKcD1/8BWEidquSgPASxs9e WH+MvDlV/tgwzLVAG0Zp5x7DE/VzDPIKtMMRzgx1clSSPyRwzW0jhp+C4/xPsDCT 2lLHZu/ay7O2A1kiH6m0/ULAm/gUzRNsKCNRlP/HVVXl7+U6lZeZR3D14QOPl8n8 F1W/seOCLxnxx8dVF/hHmirDQuwSjF9vRewmWvvOUgzmYBid8j0= =6U2J -----END PGP SIGNATURE----- Merge tag 'x86_misc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 updates from Borislav Petkov: - Remove the local symbols prefix of the get/put_user() exception handling symbols so that tools do not get confused by the presence of code belonging to the wrong symbol/not belonging to any symbol - Improve csum_partial()'s performance - Some improvements to the kcpuid tool * tag 'x86_misc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/lib: Make get/put_user() exception handling a visible symbol x86/csum: Fix clang -Wuninitialized in csum_partial() x86/csum: Improve performance of `csum_partial` tools/x86/kcpuid: Add .gitignore tools/x86/kcpuid: Dump the correct CPUID function in error |
||
|
Linus Torvalds
|
8c69e7afe9 |
- Up until now the Fast Short Rep Mov optimizations implied the presence
of the ERMS CPUID flag. AMD decoupled them with a BIOS setting so decouple that dependency in the kernel code too - Teach the alternatives machinery to handle relocations - Make debug_alternative accept flags in order to see only that set of patching done one is interested in - Other fixes, cleanups and optimizations to the patching code -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmSZi2AACgkQEsHwGGHe VUqhGw/9EC/m5HTFBlCy9PS5Qy6pPLzmHR5Tuy4meqlnB1gN+5wzfxdYEwHm46hH SR6WqR12yVaCMIzh66y8nTJyMbIykaBbfFJb3WesdDrBIYUZ9f+7O+Xd0JS6Jykd 2HBHOyaVS1/W75+y6w9JhTExBH5xieCpJVIYyAvifbn/pB8XmuTTwJ1Z3EJ8DzkK AN16i46bUiKNBdTYZUMhtKL4vHVfqLYMskgWe6IG7DmRLOwikR0uRVhuVqP/bmUj U128cUacGJT2AYbZarTAKmOa42nDj3TpJqRp1qit3y6Cun4vxKH+1A91UPd7IHTa M5H1bNSgfXMm8rU+JgfvXKqrCTckGn2OqlCkJfPV3RBeP9IcQBBF0vE3dnM/X2We dwbXeDfJvc+1s4/M41MOhyahTUbW+4iRK5UCZEt1mprTbtzHTlN7RROo7QLpFsWx T0Jqvsd1raAutPTgTjU7ToQwDpSQNnn4Y/KoEdpvOCXR8wU7Wo5/+Qa4tEkIY3W6 mUFpJcgFC9QEKLuaNAofPIhMuZ/vzRVtpK7wbLn4KR5JZA8AxznenMFVg8YPWRFI 4oga0kMFJ7t6z/CXHtrxFaLQ9e7WAUSRU6gPiz8As1F/K9N0JWMUfjuTJcgjUsF8 bwdCNinwG8y3rrPUCrqbO5N766ZkLYd6NksKlmIyUvtCcS0ksbg= =mH38 -----END PGP SIGNATURE----- Merge tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 instruction alternatives updates from Borislav Petkov: - Up until now the Fast Short Rep Mov optimizations implied the presence of the ERMS CPUID flag. AMD decoupled them with a BIOS setting so decouple that dependency in the kernel code too - Teach the alternatives machinery to handle relocations - Make debug_alternative accept flags in order to see only that set of patching done one is interested in - Other fixes, cleanups and optimizations to the patching code * tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternative: PAUSE is not a NOP x86/alternatives: Add cond_resched() to text_poke_bp_batch() x86/nospec: Shorten RESET_CALL_DEPTH x86/alternatives: Add longer 64-bit NOPs x86/alternatives: Fix section mismatch warnings x86/alternative: Optimize returns patching x86/alternative: Complicate optimize_nops() some more x86/alternative: Rewrite optimize_nops() some x86/lib/memmove: Decouple ERMS from FSRM x86/alternative: Support relocations in alternatives x86/alternative: Make debug-alternative selective |
||
|
Peter Zijlstra
|
df25edbac3 |
x86/alternatives: Add longer 64-bit NOPs
By adding support for longer NOPs there are a few more alternatives that can turn into a single instruction. Add up to NOP11, the same limit where GNU as .nops also stops generating longer nops. This is because a number of uarchs have severe decode penalties for more than 3 prefixes. [ bp: Sync up with the version in tools/ while at it. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230515093020.661756940@infradead.org |
||
|
Tiezhu Yang
|
4e111f0cf0 |
perf bench syscall: Fix __NR_execve undeclared build error
The __NR_execve definition for i386 was deleted by mistake in the commit |
||
|
Arnaldo Carvalho de Melo
|
1b5f159ce8 |
tools headers disabled-features: Sync with the kernel sources
To pick the changes from:
|
||
|
Arnaldo Carvalho de Melo
|
29719e3198 |
tools headers UAPI: Sync arch prctl headers with the kernel sources
To pick the changes in this cset: |
||
|
Arnaldo Carvalho de Melo
|
7f02ce62a6 |
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
This is to get the changes from: |
||
|
Arnaldo Carvalho de Melo
|
9bc83d6e38 |
tools headers x86 cpufeatures: Sync with the kernel sources
To pick the changes from: |
||
|
Yanteng Si
|
34e82891d9 |
tools arch x86: Sync the msr-index.h copy with the kernel sources
Picking the changes from:
|
||
|
Yanteng Si
|
705049ca4f |
tools headers kvm: Sync uapi/{asm/linux} kvm.h headers with the kernel sources
Picking the changes from: |
||
|
Rong Tao
|
b2ad431f64 |
tools/x86/kcpuid: Add .gitignore
Ignore kcpuid ELF file. [ bp: Drop the '/' before the name. ] Signed-off-by: Rong Tao <rtoax@foxmail.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/tencent_F0318BF0724705EC156C341E11DE4040E805@qq.com |
||
|
Borislav Petkov (AMD)
|
0150d1bfbe |
tools/x86/kcpuid: Dump the correct CPUID function in error
The tool uses the 16 least significant bits of the CPUID leaf as an index into its array of CPUID function field descriptions. However, when that index is non-existent, it uses the same, truncated index to report it, which is wrong: $ kcpuid -l 0x80000034 ERR: invalid input index (0x34) Use the original index number in the error message. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230426094107.27348-1-bp@alien8.de |
||
|
Linus Torvalds
|
f085df1be6 |
Disable building BPF based features by default for v6.4.
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZFbCXwAKCRCyPKLppCJ+
J7cHAP97erKY4hBXArjpfzcvpFmboh/oqhbTLntyIpS6TEnOyQEAyervAPGIjQYC
DCo4foyXmOWn3dhNtK9M+YiRl3o2SgQ=
=7G78
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"Third version of perf tool updates, with the build problems with with
using a 'vmlinux.h' generated from the main build fixed, and the bpf
skeleton build disabled by default.
Build:
- Require libtraceevent to build, one can disable it using
NO_LIBTRACEEVENT=1.
It is required for tools like 'perf sched', 'perf kvm', 'perf
trace', etc.
libtraceevent is available in most distros so installing
'libtraceevent-devel' should be a one-time event to continue
building perf as usual.
Using NO_LIBTRACEEVENT=1 produces tooling that is functional and
sufficient for lots of users not interested in those libtraceevent
dependent features.
- Allow Python support in 'perf script' when libtraceevent isn't
linked, as not all features requires it, for instance Intel PT does
not use tracepoints.
- Error if the python interpreter needed for jevents to work isn't
available and NO_JEVENTS=1 isn't set, preventing a build without
support for JSON vendor events, which is a rare but possible
condition. The two check error messages:
$(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.)
$(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.)
- Make libbpf 1.0 the minimum required when building with out of
tree, distro provided libbpf.
- Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++
demangler, add 'perf test' entry for it.
- Make binutils libraries opt in, as distros disable building with it
due to licensing, they were used for C++ demangling, for instance.
- Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or
equivalent) isn't installed, we'll just have a build warning:
Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev
- Add a feature test for scandirat(), that is not implemented so far
in musl and uclibc, disabling features that need it, such as
scanning for tracepoints in /sys/kernel/tracing/events.
perf BPF filters:
- New feature where BPF can be used to filter samples, for instance:
$ sudo ./perf record -e cycles --filter 'period > 1000' true
$ sudo ./perf script
perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms])
perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms])
perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms])
perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms])
perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms])
true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms])
true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
- In addition to 'period' (PERF_SAMPLE_PERIOD), the other
PERF_SAMPLE_ can be used for filtering, and also some other sample
accessible values, from tools/perf/Documentation/perf-record.txt:
Essentially the BPF filter expression is:
<term> <operator> <value> (("," | "||") <term> <operator> <value>)*
The <term> can be one of:
ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr,
code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat,
p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock,
mem_dtlb, mem_blk, mem_hops
The <operator> can be one of:
==, !=, >, >=, <, <=, &
The <value> can be one of:
<number> (for any term)
na, load, store, pfetch, exec (for mem_op)
l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl)
na, none, hit, miss, hitm, fwd, peer (for mem_snoop)
remote (for mem_remote)
na, locked (for mem_locked)
na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb)
na, by_data, by_addr (for mem_blk)
hops0, hops1, hops2, hops3 (for mem_hops)
perf lock contention:
- Show lock type with address.
- Track and show mmap_lock, siglock and per-cpu rq_lock with address.
This is done for mmap_lock by following the current->mm pointer:
$ sudo ./perf lock con -abl -- sleep 10
contended total wait max wait avg wait address symbol
...
16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640
17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0
3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock
3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58
1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70
9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock
14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0
3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock
16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560
11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock
1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8
1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock
581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058
5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070
112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120
381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock
255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80
- Update default map size to 16384.
- Allocate single letter option -M for --map-nr-entries, as it is
proving being frequently used.
- Fix struct rq lock access for older kernels with BPF's CO-RE
(Compile once, run everywhere).
- Fix problems found with MSAn.
perf report/top:
- Add inline information when using --call-graph=fp or lbr, as was
already done to the --call-graph=dwarf callchain mode.
- Improve the 'srcfile' sort key performance by really using an
optimization introduced in 6.2 for the 'srcline' sort key that
avoids calling addr2line for comparision with each sample.
perf sched:
- Make 'perf sched latency/map/replay' to use "sched:sched_waking"
instead of "sched:sched_waking", consistent with 'perf record'
since
|
||
|
Linus Torvalds
|
2aff7c706c |
Objtool changes for v6.4:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
this inconsistently follow this new, common convention, and fix all the fallout
that objtool can now detect statically.
- Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
- Misc improvements & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NwEV
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
|
||
|
Linus Torvalds
|
4a4a28fca6 |
- Add a x86 hw vulnerabilities section to MAINTAINERS so that the folks
involved in it can get CCed on patches - Add some more CPUID leafs to the kcpuid tool and extend its functionality to be more useful when grepping for CPUID bits -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmRGiuYACgkQEsHwGGHe VUoC2BAAsbtki6d4bds6uezRapz9RoOJUGHm4eY4drMCXe2Mz0myD8/jDV6kRKVb WWDlVEv9fxoTOHTCO7kazjrwm6wXt/MgZ51gyZx9/WyqlS27U1SCH9REHKKhzgCK OduHi741mfAXOZ1h0M3atpJvgaKzqqugVYX7whaGwVbPKAFT+DLu+lendzAe5sxv 1WG1JIhfLf0Wn4aUX9E5N9wenyGOUWHgPbE/UBSKaxO6ySi+ut4Mn2fTKZ70Lyp1 HoZMNns2RDknXD3dMcZG3ztPaLwsNoEgRkIjLolVFMnaK2L9DrVqP+6/7mCGc5er GHdFeDdtnHih9CNm4WOQtrbynrdEAM93A3u531JCpySmVSTG1j+pCTd0P020mscl It+jnVm1f0csY7/y7tUMnzzNsQRQQszTCfpiuXTZy5Ml7z68sLcDqJQfPwFZh6fX OqmplDxE127VvZESakDyFbhV600PF1aC6xRoM2pkjqKcL6uZ7JDh+s4KisMRGGGK i39PaCH+E0aJ0mIp9EvWKI7LXYot3DPUX1A+O4zjNnsnC4dNTLu34Hb8fdBxOUB0 egqcPVDIY23ELwtzF2+f7rMZ3DufEAQ2O3YP/aVRo8didepYPJpbWb/JKvpnaYXR 4Zp0gqUtKmJ6xvO0o3pECsm/Y5WmCYHKeo9CuggT6T8iTbEEedo= =hSYX -----END PGP SIGNATURE----- Merge tag 'x86_misc_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 updates from Borislav Petkov: - Add a x86 hw vulnerabilities section to MAINTAINERS so that the folks involved in it can get CCed on patches - Add some more CPUID leafs to the kcpuid tool and extend its functionality to be more useful when grepping for CPUID bits * tag 'x86_misc_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add x86 hardware vulnerabilities section tools/x86/kcpuid: Dump the CPUID function in detailed view tools/x86/kcpuid: Update AMD leaf Fn80000001 tools/x86/kcpuid: Fix avx512bw and avx512lvl fields in Fn00000007 |
||
|
Tiezhu Yang
|
ece7f7c050 |
perf bench syscall: Add fork syscall benchmark
This is a follow up patch for the execve bench which is actually fork + execve, it makes sense to add the fork syscall benchmark to compare the execve part precisely. Some archs have no __NR_fork definition which is used only as a check condition to call test_fork(), let us just define it as -1 to avoid build error. Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: loongson-kernel@lists.loongnix.cn Link: https://lore.kernel.org/r/1679381821-22736-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Josh Poimboeuf
|
fb799447ae |
x86,objtool: Split UNWIND_HINT_EMPTY in two
Mark reported that the ORC unwinder incorrectly marks an unwind as
reliable when the unwind terminates prematurely in the dark corners of
return_to_handler() due to lack of information about the next frame.
The problem is UNWIND_HINT_EMPTY is used in two different situations:
1) The end of the kernel stack unwind before hitting user entry, boot
code, or fork entry
2) A blind spot in ORC coverage where the unwinder has to bail due to
lack of information about the next frame
The ORC unwinder has no way to tell the difference between the two.
When it encounters an undefined stack state with 'end=1', it blindly
marks the stack reliable, which can break the livepatch consistency
model.
Fix it by splitting UNWIND_HINT_EMPTY into UNWIND_HINT_UNDEFINED and
UNWIND_HINT_END_OF_STACK.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/fd6212c8b450d3564b855e1cb48404d6277b4d9f.1677683419.git.jpoimboe@kernel.org
|
||
|
Josh Poimboeuf
|
f902cfdd46 |
x86,objtool: Introduce ORC_TYPE_*
Unwind hints and ORC entry types are two distinct things. Separate them out more explicitly. Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/cc879d38fff8a43f8f7beb2fd56e35a5a384d7cd.1677683419.git.jpoimboe@kernel.org |
||
|
Linus Torvalds
|
49be4fb281 |
perf tools fixes for v6.3:
- Add Adrian Hunter to MAINTAINERS as a perf tools reviewer.
- Sync various tools/ copies of kernel headers with the kernel sources, this
time trying to avoid first merging with upstream to then update but instead
copy from upstream so that a merge is avoided and the end result after merging
this pull request is the one expected, tools/perf/check-headers.sh (mostly)
happy, less warnings while building tools/perf/.
- Fix counting when initial delay configured by setting
perf_attr.enable_on_exec when starting workloads from the perf command line.
- Don't avoid emitting a PERF_RECORD_MMAP2 in 'perf inject --buildid-all' when
that record comes with a build-id, otherwise we end up not being able to
resolve symbols.
- Don't use comma as the CSV output separator the "stat+csv_output" test, as
comma can appear on some tests as a modifier for an event, use @ instead,
ditto for the JSON linter test.
- The offcpu test was looking for some bits being set on
task_struct->prev_state without masking other bits not important for this
specific 'perf test', fix it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZApKjQAKCRCyPKLppCJ+
JzdfAQDRnwDCxhb4cvx7lVR32L1XMIFW6qLWRBJWoxC2SJi6lgD/SoQgKswkxrJv
XnBP7jEaIsh3M3ak82MxLKbjSAEvnwk=
=jup7
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Add Adrian Hunter to MAINTAINERS as a perf tools reviewer
- Sync various tools/ copies of kernel headers with the kernel sources,
this time trying to avoid first merging with upstream to then update
but instead copy from upstream so that a merge is avoided and the end
result after merging this pull request is the one expected,
tools/perf/check-headers.sh (mostly) happy, less warnings while
building tools/perf/
- Fix counting when initial delay configured by setting
perf_attr.enable_on_exec when starting workloads from the perf
command line
- Don't avoid emitting a PERF_RECORD_MMAP2 in 'perf inject
--buildid-all' when that record comes with a build-id, otherwise we
end up not being able to resolve symbols
- Don't use comma as the CSV output separator the "stat+csv_output"
test, as comma can appear on some tests as a modifier for an event,
use @ instead, ditto for the JSON linter test
- The offcpu test was looking for some bits being set on
task_struct->prev_state without masking other bits not important for
this specific 'perf test', fix it
* tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Add Adrian Hunter to MAINTAINERS as a reviewer
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers kvm: Sync uapi/{asm/linux} kvm.h headers with the kernel sources
tools include UAPI: Synchronize linux/fcntl.h with the kernel sources
tools headers: Synchronize {linux,vdso}/bits.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
perf stat: Fix counting when initial delay configured
tools headers svm: Sync svm headers with the kernel sources
perf test: Avoid counting commas in json linter
perf tests stat+csv_output: Switch CSV separator to @
perf inject: Fix --buildid-all not to eat up MMAP2
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf test: Fix offcpu test prev_state check
|
||
|
Borislav Petkov (AMD)
|
cd3ad66195 |
tools/x86/kcpuid: Dump the CPUID function in detailed view
Sometimes it is useful to know which CPUID leaf contains the fields so
add it to -d output so that it looks like this:
CPUID_0x8000001e_ECX[0x0]:
extended_apic_id : 0x8 - Extended APIC ID
core_id : 0x4 - Identifies the logical core ID
threads_per_core : 0x1 - The number of threads per core is threads_per_core + 1
node_id : 0x0 - Node ID
nodes_per_processor : 0x0 - Nodes per processor { 0: 1 node, else reserved }
CPUID_0x8000001f_ECX[0x0]:
sme - Secure Memory Encryption
...
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20230206141832.4162264-4-terry.bowman@amd.com
|
||
|
Terry Bowman
|
ce22e4346f |
tools/x86/kcpuid: Update AMD leaf Fn80000001
Add missing features to sub-leafs EAX, ECX, and EDX of 'Extended Processor Signature and Feature Bits' leaf Fn80000001. Signed-off-by: Terry Bowman <terry.bowman@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Feng Tang <feng.tang@intel.com> Link: https://lore.kernel.org/r/20230206141832.4162264-3-terry.bowman@amd.com |
||
|
Terry Bowman
|
4e347bdf44 |
tools/x86/kcpuid: Fix avx512bw and avx512lvl fields in Fn00000007
Leaf Fn00000007 contains avx512bw at bit 26 and avx512vl at bit 28. This
is incorrect per the SDM. Correct avx512bw to be bit 30 and avx512lvl to
be bit 31.
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
7d0930647c |
tools headers x86 cpufeatures: Sync with the kernel sources
To pick the changes from:
|
||
|
Arnaldo Carvalho de Melo
|
3ee7cb4fdf |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in: |
||
|
Arnaldo Carvalho de Melo
|
33c53f9b5a |
tools headers kvm: Sync uapi/{asm/linux} kvm.h headers with the kernel sources
To pick up the changes in: |
||
|
Arnaldo Carvalho de Melo
|
31d2e6b5d4 |
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
We also continue with SYM_TYPED_FUNC_START() in util/include/linux/linkage.h
and with an exception in tools/perf/check_headers.sh's diff check to ignore
the include cfi_types.h line when checking if the kernel original files drifted
from the copies we carry.
This is to get the changes from:
|
||
|
Arnaldo Carvalho de Melo
|
a98c0710b4 |
tools headers svm: Sync svm headers with the kernel sources
To pick the changes in:
|
||
|
Linus Torvalds
|
857f1268a5 |
Changes in this cycle were:
- Shrink 'struct instruction', to improve objtool performance & memory
footprint.
- Other maximum memory usage reductions - this makes the build both faster,
and fixes kernel build OOM failures on allyesconfig and similar configs
when they try to build the final (large) vmlinux.o.
- Fix ORC unwinding when a kprobe (INT3) is set on a stack-modifying
single-byte instruction (PUSH/POP or LEAVE). This requires the
extension of the ORC metadata structure with a 'signal' field.
- Misc fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bpPY
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Shrink 'struct instruction', to improve objtool performance & memory
footprint
- Other maximum memory usage reductions - this makes the build both
faster, and fixes kernel build OOM failures on allyesconfig and
similar configs when they try to build the final (large) vmlinux.o
- Fix ORC unwinding when a kprobe (INT3) is set on a stack-modifying
single-byte instruction (PUSH/POP or LEAVE). This requires the
extension of the ORC metadata structure with a 'signal' field
- Misc fixes & cleanups
* tag 'objtool-core-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
objtool: Fix ORC 'signal' propagation
objtool: Remove instruction::list
x86: Fix FILL_RETURN_BUFFER
objtool: Fix overlapping alternatives
objtool: Union instruction::{call_dest,jump_table}
objtool: Remove instruction::reloc
objtool: Shrink instruction::{type,visited}
objtool: Make instruction::alts a single-linked list
objtool: Make instruction::stack_ops a single-linked list
objtool: Change arch_decode_instruction() signature
x86/entry: Fix unwinding from kprobe on PUSH/POP instruction
x86/unwind/orc: Add 'signal' field to ORC metadata
objtool: Optimize layout of struct special_alt
objtool: Optimize layout of struct symbol
objtool: Allocate multiple structures with calloc()
objtool: Make struct check_options static
objtool: Make struct entries[] static and const
objtool: Fix HOSTCC flag usage
objtool: Properly support make V=1
objtool: Install libsubcmd in build
...
|
||
|
Linus Torvalds
|
0df82189bc |
perf tools changes for v6.3:
- 'perf lock contention' improvements:
- Add -o/--lock-owner option:
$ sudo ./perf lock contention -abo -- ./perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 4.766 [sec]
4.766540 usecs/op
209795 ops/sec
contended total wait max wait avg wait pid owner
403 565.32 us 26.81 us 1.40 us -1 Unknown
4 27.99 us 8.57 us 7.00 us 1583145 sched-pipe
1 8.25 us 8.25 us 8.25 us 1583144 sched-pipe
1 2.03 us 2.03 us 2.03 us 5068 chrome
The owner is unknown in most cases. Filtering only for the mutex locks, it
will more likely get the owners.
- -S/--callstack-filter is to limit display entries having the given
string in the callstack
$ sudo ./perf lock contention -abv -S net sleep 1
...
contended total wait max wait avg wait type caller
5 70.20 us 16.13 us 14.04 us spinlock __dev_queue_xmit+0xb6d
0xffffffffa5dd1c60 _raw_spin_lock+0x30
0xffffffffa5b8f6ed __dev_queue_xmit+0xb6d
0xffffffffa5cd8267 ip6_finish_output2+0x2c7
0xffffffffa5cdac14 ip6_finish_output+0x1d4
0xffffffffa5cdb477 ip6_xmit+0x457
0xffffffffa5d1fd17 inet6_csk_xmit+0xd7
0xffffffffa5c5f4aa __tcp_transmit_skb+0x54a
0xffffffffa5c6467d tcp_keepalive_timer+0x2fd
Please note that to have the -b option (BPF) working above one has to build
with BUILD_BPF_SKEL=1.
- Add more 'perf test' entries to test these new features.
- Add Ian Rogers to MAINTAINERS as a perf tools reviewer.
- Add support for retire latency feature (pipeline stall of a instruction
compared to the previous one, in cycles) present on some Intel processors.
- Add 'perf c2c' report option to show false sharing with adjacent cachelines, to
be used in machines with cacheline prefetching, where accesses to a cacheline
brings the next one too.
- Skip 'perf test bpf' when the required kernel-debuginfo package isn't installed.
perf script:
- Add 'cgroup' field for 'perf script' output:
$ perf record --all-cgroups -- true
$ perf script -F comm,pid,cgroup
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
- Add support for showing branch speculation information in 'perf
script' and in the 'perf report' raw dump (-D).
perf record:
- Fix 'perf record' segfault with --overwrite and --max-size.
Intel PT:
- Add support for synthesizing "cycle" events from Intel PT traces as we
support "instruction" events when Intel PT CYC packets are available. This
enables much more accurate profiles than when using the regular 'perf record -e
cycles' (the default) when the workload lasts for very short periods (<10ms).
- .plt symbol handling improvements, better handling IBT (in the past
MPX) done in the context of decoding Intel PT processor traces, IFUNC
symbols on x86_64, static executables, understanding .plt.got symbols on
x86_64.
- Add a 'perf test' to test symbol resolution, part of the .plt
improvements series, this tests things like symbol size in contexts
where only the symbol start is available (kallsyms), etc.
- Better handle auxtrace/Intel PT data when using pipe mode (perf record sleep 1|perf report).
- Fix symbol lookup with kcore with multiple segments match stext,
getting the symbol resolution to just show DSOs as unknown.
ARM:
- Timestamp improvements for ARM64 systems with ETMv4 (Embedded Trace
Macrocell v4).
- Ensure ARM64 CoreSight timestamps don't go backwards.
- Document that ARM64 SPE (Statistical Profiling Extension) is used with 'perf c2c/mem'.
- Add raw decoding for ARM64 SPEv1.2 previous branch address.
- Update neoverse-n2-v2 ARM vendor events (JSON tables): topdown L1, TLB,
cache, branch, PE utilization and instruction mix metrics.
- Update decoder code for OpenCSD version 1.4, on ARM64 systems.
- Fix command line auto-complete of CPU events on aarch64.
perf test/bench:
- Switch basic BPF filtering test to use syscall tracepoint to avoid the
variable number of probes inserted when using the previous probe point
(do_epoll_wait) that happens on different CPU architectures.
- Fix DWARF unwind test by adding non-inline to expected function in a
backtrace.
- Use 'grep -c' where the longer form 'grep | wc -l' was being used.
- Add getpid and execve benchmarks to 'perf bench syscall'.
Miscellaneous:
- Avoid d3-flame-graph package dependency in 'perf script flamegraph',
making this feature more generally available.
- Add JSON metric events to present CPI stall cycles in Power10.
- Assorted improvements/refactorings on the JSON metrics parsing code.
Build:
- Fix 'perf probe' and 'perf test' when libtraceevent isn't linked, as
several tests use tracepoints, those should be skipped.
- More fallout fixes for the removal of tools/lib/traceevent/.
- Fix build error when linking with libpfm.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCY/YzGgAKCRCyPKLppCJ+
J98CAP4/GD3E86Dk+S+w5FmPEHuBKootuZ3pHOqCnXLiyKFZqgEAs9TWOg9KVKGh
io9cLluMjzfRwQrND8cpn3VfXxWvVAQ=
=L1qh
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.3-1-2023-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
"Miscellaneous:
- Add Ian Rogers to MAINTAINERS as a perf tools reviewer.
- Add support for retire latency feature (pipeline stall of a
instruction compared to the previous one, in cycles) present on
some Intel processors.
- Add 'perf c2c' report option to show false sharing with adjacent
cachelines, to be used in machines with cacheline prefetching,
where accesses to a cacheline brings the next one too.
- Skip 'perf test bpf' when the required kernel-debuginfo package
isn't installed.
- Avoid d3-flame-graph package dependency in 'perf script flamegraph',
making this feature more generally available.
- Add JSON metric events to present CPI stall cycles in Power10.
- Assorted improvements/refactorings on the JSON metrics parsing
code.
perf lock contention:
- Add -o/--lock-owner option:
$ sudo ./perf lock contention -abo -- ./perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 4.766 [sec]
4.766540 usecs/op
209795 ops/sec
contended total wait max wait avg wait pid owner
403 565.32 us 26.81 us 1.40 us -1 Unknown
4 27.99 us 8.57 us 7.00 us 1583145 sched-pipe
1 8.25 us 8.25 us 8.25 us 1583144 sched-pipe
1 2.03 us 2.03 us 2.03 us 5068 chrome
The owner is unknown in most cases. Filtering only for the
mutex locks, it will more likely get the owners.
- -S/--callstack-filter is to limit display entries having the given
string in the callstack:
$ sudo ./perf lock contention -abv -S net sleep 1
...
contended total wait max wait avg wait type caller
5 70.20 us 16.13 us 14.04 us spinlock __dev_queue_xmit+0xb6d
0xffffffffa5dd1c60 _raw_spin_lock+0x30
0xffffffffa5b8f6ed __dev_queue_xmit+0xb6d
0xffffffffa5cd8267 ip6_finish_output2+0x2c7
0xffffffffa5cdac14 ip6_finish_output+0x1d4
0xffffffffa5cdb477 ip6_xmit+0x457
0xffffffffa5d1fd17 inet6_csk_xmit+0xd7
0xffffffffa5c5f4aa __tcp_transmit_skb+0x54a
0xffffffffa5c6467d tcp_keepalive_timer+0x2fd
Please note that to have the -b option (BPF) working above one has
to build with BUILD_BPF_SKEL=1.
- Add more 'perf test' entries to test these new features.
perf script:
- Add 'cgroup' field for 'perf script' output:
$ perf record --all-cgroups -- true
$ perf script -F comm,pid,cgroup
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
- Add support for showing branch speculation information in 'perf
script' and in the 'perf report' raw dump (-D).
perf record:
- Fix 'perf record' segfault with --overwrite and --max-size.
perf test/bench:
- Switch basic BPF filtering test to use syscall tracepoint to avoid
the variable number of probes inserted when using the previous
probe point (do_epoll_wait) that happens on different CPU
architectures.
- Fix DWARF unwind test by adding non-inline to expected function in
a backtrace.
- Use 'grep -c' where the longer form 'grep | wc -l' was being used.
- Add getpid and execve benchmarks to 'perf bench syscall'.
Intel PT:
- Add support for synthesizing "cycle" events from Intel PT traces as
we support "instruction" events when Intel PT CYC packets are
available. This enables much more accurate profiles than when using
the regular 'perf record -e cycles' (the default) when the workload
lasts for very short periods (<10ms).
- .plt symbol handling improvements, better handling IBT (in the past
MPX) done in the context of decoding Intel PT processor traces,
IFUNC symbols on x86_64, static executables, understanding .plt.got
symbols on x86_64.
- Add a 'perf test' to test symbol resolution, part of the .plt
improvements series, this tests things like symbol size in contexts
where only the symbol start is available (kallsyms), etc.
- Better handle auxtrace/Intel PT data when using pipe mode (perf
record sleep 1|perf report).
- Fix symbol lookup with kcore with multiple segments match stext,
getting the symbol resolution to just show DSOs as unknown.
ARM:
- Timestamp improvements for ARM64 systems with ETMv4 (Embedded Trace
Macrocell v4).
- Ensure ARM64 CoreSight timestamps don't go backwards.
- Document that ARM64 SPE (Statistical Profiling Extension) is used
with 'perf c2c/mem'.
- Add raw decoding for ARM64 SPEv1.2 previous branch address.
- Update neoverse-n2-v2 ARM vendor events (JSON tables): topdown L1,
TLB, cache, branch, PE utilization and instruction mix metrics.
- Update decoder code for OpenCSD version 1.4, on ARM64 systems.
- Fix command line auto-complete of CPU events on aarch64.
Build:
- Fix 'perf probe' and 'perf test' when libtraceevent isn't linked,
as several tests use tracepoints, those should be skipped.
- More fallout fixes for the removal of tools/lib/traceevent/.
- Fix build error when linking with libpfm"
* tag 'perf-tools-for-v6.3-1-2023-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (114 commits)
perf tests stat_all_metrics: Change true workload to sleep workload for system wide check
perf vendor events power10: Add JSON metric events to present CPI stall cycles in powerpc
perf intel-pt: Synthesize cycle events
perf c2c: Add report option to show false sharing in adjacent cachelines
perf record: Fix segfault with --overwrite and --max-size
perf stat: Avoid merging/aggregating metric counts twice
perf tools: Fix perf tool build error in util/pfm.c
perf tools: Fix auto-complete on aarch64
perf lock contention: Support old rw_semaphore type
perf lock contention: Add -o/--lock-owner option
perf lock contention: Fix to save callstack for the default modified
perf test bpf: Skip test if kernel-debuginfo is not present
perf probe: Update the exit error codes in function try_to_find_probe_trace_event
perf script: Fix missing Retire Latency fields option documentation
perf event x86: Add retire_lat when synthesizing PERF_SAMPLE_WEIGHT_STRUCT
perf test x86: Support the retire_lat (Retire Latency) sample_type check
perf test bpf: Check for libtraceevent support
perf script: Support Retire Latency
perf report: Support Retire Latency
perf lock contention: Support filters for different aggregation
...
|
||
|
Ingo Molnar
|
585a78c1f7 |
Merge branch 'linus' into objtool/core, to pick up Xen dependencies
Pick up dependencies - freshly merged upstream via xen-next - before applying dependent objtool changes. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Arnaldo Carvalho de Melo
|
3ef9fec011 |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes from these csets:
|
||
|
Linus Torvalds
|
877934769e |
- Cache the AMD debug registers in per-CPU variables to avoid MSR writes
where possible, when supporting a debug registers swap feature for SEV-ES guests - Add support for AMD's version of eIBRS called Automatic IBRS which is a set-and-forget control of indirect branch restriction speculation resources on privilege change - Add support for a new x86 instruction - LKGS - Load kernel GS which is part of the FRED infrastructure - Reset SPEC_CTRL upon init to accomodate use cases like kexec which rediscover - Other smaller fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmP1RDIACgkQEsHwGGHe VUohBw//ZB9ZRqsrKdm6D9YaP2x4Zb+kqKqo6rjYeWaYqyPyCwDujPwh+pb3Oq1t aj62muDv1t/wEJc8mKNkfXkjEEtBVAOcpb5YIpKreoEvNKyevol83Ih0u5iJcTRE E5qf8HDS8b/JZrcazJJLl6WQmQNH5RiKSu5bbCpRhoeOcyo5pRYR5MztK9vNmAQk GMdwHsUSU+jN8uiE4HnpaOb/luhgFindRwZVTpdjJegQWLABS8cl3CKeTv4+PW45 isvv37XnQP248wsptIEVRHeG6g3g/HtvwRx7DikUw06QwUyUK7H9hJssOoSP8TL9 u4psRwfWnJ1OxU6klL+s0Ii+pjQ97wXmK/oqK7QkdUwhWqR/mQAW2e9kWHAngyDn A6mKbzSM6HFAeSXQpB9cMb6uvYRD44SngDFe3WXtEK8jiiQ70ikUm4E28I5KJOPg s+RyioHk0NFRHYSOOBqNG1NKz6ED7L3GbgbbzxkgMh21AAyI3X351t+PtGoLV5ew eqOsM7lbg9Scg1LvPk1JcoALS8USWqgar397rz9qGUs+OkPWBtEBCmTdMz/Eb+2t g/WHdLS5/ajSs5gNhT99W3DeqZMPDEkgBRSeyBBmY3CUD3gBL2wXEktRXv504zBR RC4oyUPX3c9E2ib6GATLE3kBLbcz9hTWbMxF+X3lLJvTVd/Qc2o= =v/ZC -----END PGP SIGNATURE----- Merge tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpuid updates from Borislav Petkov: - Cache the AMD debug registers in per-CPU variables to avoid MSR writes where possible, when supporting a debug registers swap feature for SEV-ES guests - Add support for AMD's version of eIBRS called Automatic IBRS which is a set-and-forget control of indirect branch restriction speculation resources on privilege change - Add support for a new x86 instruction - LKGS - Load kernel GS which is part of the FRED infrastructure - Reset SPEC_CTRL upon init to accomodate use cases like kexec which rediscover - Other smaller fixes and cleanups * tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/amd: Cache debug register values in percpu variables KVM: x86: Propagate the AMD Automatic IBRS feature to the guest x86/cpu: Support AMD Automatic IBRS x86/cpu, kvm: Add the SMM_CTL MSR not present feature x86/cpu, kvm: Add the Null Selector Clears Base feature x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code x86/cpu, kvm: Add support for CPUID_80000021_EAX x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h> x86/gsseg: Use the LKGS instruction if available for load_gs_index() x86/gsseg: Move load_gs_index() to its own new header file x86/gsseg: Make asm_load_gs_index() take an u16 x86/opcode: Add the LKGS instruction to x86-opcode-map x86/cpufeature: Add the CPU feature bit for LKGS x86/bugs: Reset speculation control settings on init x86/cpu: Remove redundant extern x86_read_arch_cap_msr() |
||
|
Josh Poimboeuf
|
ffb1b4a410 |
x86/unwind/orc: Add 'signal' field to ORC metadata
Add a 'signal' field which allows unwind hints to specify whether the instruction pointer should be taken literally (like for most interrupts and exceptions) rather than decremented (like for call stack return addresses) when used to find the next ORC entry. Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/d2c5ec4d83a45b513d8fd72fab59f1a8cfa46871.1676068346.git.jpoimboe@kernel.org |
||
|
Tiezhu Yang
|
540f8b5640 |
perf bench syscall: Add execve syscall benchmark
This commit adds the execve syscall benchmark, more syscall benchmarks can be added in the future. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/1668052208-14047-5-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Tiezhu Yang
|
391f84e555 |
perf bench syscall: Add getpgid syscall benchmark
This commit adds a simple getpgid syscall benchmark, more syscall benchmarks can be added in the future. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/1668052208-14047-4-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Tiezhu Yang
|
3fe91f3262 |
perf bench syscall: Introduce bench_syscall_common()
In the current code, there is only a basic syscall benchmark via getppid, this is not enough. Introduce bench_syscall_common() so that we can add more syscalls to benchmark. This is preparation for later patch, no functionality change. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/1668052208-14047-3-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Tiezhu Yang
|
1bad502775 |
tools x86: Keep list sorted by number in unistd_{32,64}.h
It is better to keep list sorted by number in unistd_{32,64}.h,
so that we can add more syscall number to a proper position.
This is preparation for later patch, no functionality change.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1668052208-14047-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
effa76856f |
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
To pick the changes in: |
||
|
H. Peter Anvin (Intel)
|
5a91f12660 |
x86/opcode: Add the LKGS instruction to x86-opcode-map
Add the instruction opcode used by LKGS to x86-opcode-map. Opcode number is per public FRED draft spec v3.0. Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Xin Li <xin3.li@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230112072032.35626-3-xin3.li@intel.com |