Commit graph

1224 commits

Author SHA1 Message Date
Andre Przywara
a5e1e6ca94 KVM: arm/arm64: VGIC: Fix command handling while ITS being disabled
The ITS spec says that ITS commands are only processed when the ITS
is enabled (section 8.19.4, Enabled, bit[0]). Our emulation was not taking
this into account.
Fix this by checking the enabled state before handling CWRITER writes.

On the other hand that means that CWRITER could advance while the ITS
is disabled, and enabling it would need those commands to be processed.
Fix this case as well by refactoring actual command processing and
calling this from both the GITS_CWRITER and GITS_CTLR handlers.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-07 15:44:08 +00:00
Jintack Lim
370a0ec181 KVM: arm/arm64: Let vcpu thread modify its own active state
Currently, if a vcpu thread tries to change the active state of an
interrupt which is already on the same vcpu's AP list, it will loop
forever. Since the VGIC mmio handler is called after a vcpu has
already synced back the LR state to the struct vgic_irq, we can just
let it proceed safely.

Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-07 14:48:16 +00:00
Marc Zyngier
4dfc050571 KVM: arm/arm64: vgic-v3: Don't pretend to support IRQ/FIQ bypass
Our GICv3 emulation always presents ICC_SRE_EL1 with DIB/DFB set to
zero, which implies that there is a way to bypass the GIC and
inject raw IRQ/FIQ by driving the CPU pins.

Of course, we don't allow that when the GIC is configured, but
we fail to indicate that to the guest. The obvious fix is to
set these bits (and never let them being changed again).

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-06 10:30:57 +00:00
Linus Torvalds
2d62e0768d Second batch of KVM changes for 4.11 merge window
PPC:
  * correct assumption about ASDR on POWER9
  * fix MMIO emulation on POWER9
 
 x86:
  * add a simple test for ioperm
  * cleanup TSS
    (going through KVM tree as the whole undertaking was caused by VMX's
     use of TSS)
  * fix nVMX interrupt delivery
  * fix some performance counters in the guest
 
 And two cleanup patches.
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJYuu5qAAoJEED/6hsPKofoRAUH/jkx/KFDcw3FggixysWVgRai
 iLSbbAZemnSLFSOkOU/t7Bz0fXCUgB0tAcMJd9ow01Dg1zObiTpuUIo6qEPaYHdX
 gqtUzlHuyECZEcgK0RXS9kDYLrvw7EFocxnDWQfV91qCZSS6nBSSLF3ST1rNV69W
 mUvcZG+MciDcZUe1lTexoswVTh1m7avvozEnQ5OHnZR9yicoXiadBQjzL6yqWoqf
 Ml/29zRk5+MvloTudxjkAKm3mh7psW88jNMh37TXbAA7i+Xwl9cU6GLR9mFWstoP
 7Ot7ecq9mNAUO3lTIQh7lqvB60LMFznS4IlYK7MbplC3kvJLkfzhTWaN1aGvh90=
 =cqHo
 -----END PGP SIGNATURE-----

Merge tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull more KVM updates from Radim Krčmář:
 "Second batch of KVM changes for the 4.11 merge window:

  PPC:
   - correct assumption about ASDR on POWER9
   - fix MMIO emulation on POWER9

  x86:
   - add a simple test for ioperm
   - cleanup TSS (going through KVM tree as the whole undertaking was
     caused by VMX's use of TSS)
   - fix nVMX interrupt delivery
   - fix some performance counters in the guest

  ... and two cleanup patches"

* tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: Fix pending events injection
  x86/kvm/vmx: remove unused variable in segment_base()
  selftests/x86: Add a basic selftest for ioperm
  x86/asm: Tidy up TSS limit code
  kvm: convert kvm.users_count from atomic_t to refcount_t
  KVM: x86: never specify a sample period for virtualized in_tx_cp counters
  KVM: PPC: Book3S HV: Don't use ASDR for real-mode HPT faults on POWER9
  KVM: PPC: Book3S HV: Fix software walk of guest process page tables
2017-03-04 11:36:19 -08:00
Ingo Molnar
03441a3482 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/stat.h>
We are going to split <linux/sched/stat.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/stat.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:34 +01:00
Ingo Molnar
174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Ingo Molnar
6e84f31522 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/mm.h>
We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/mm.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

The APIs that are going to be moved first are:

   mm_alloc()
   __mmdrop()
   mmdrop()
   mmdrop_async_fn()
   mmdrop_async()
   mmget_not_zero()
   mmput()
   mmput_async()
   get_task_mm()
   mm_access()
   mm_release()

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:28 +01:00
Elena Reshetova
e3736c3eb3 kvm: convert kvm.users_count from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-01 17:03:21 +01:00
Vegard Nossum
3fce371bfa mm: add new mmget() helper
Apart from adding the helper function itself, the rest of the kernel is
converted mechanically using:

  git grep -l 'atomic_inc.*mm_users' | xargs sed -i 's/atomic_inc(&\(.*\)->mm_users);/mmget\(\1\);/'
  git grep -l 'atomic_inc.*mm_users' | xargs sed -i 's/atomic_inc(&\(.*\)\.mm_users);/mmget\(\&\1\);/'

This is needed for a later patch that hooks into the helper, but might
be a worthwhile cleanup on its own.

(Michal Hocko provided most of the kerneldoc comment.)

Link: http://lkml.kernel.org/r/20161218123229.22952-2-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:48 -08:00
Vegard Nossum
f1f1007644 mm: add new mmgrab() helper
Apart from adding the helper function itself, the rest of the kernel is
converted mechanically using:

  git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)->mm_count);/mmgrab\(\1\);/'
  git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)\.mm_count);/mmgrab\(\&\1\);/'

This is needed for a later patch that hooks into the helper, but might
be a worthwhile cleanup on its own.

(Michal Hocko provided most of the kerneldoc comment.)

Link: http://lkml.kernel.org/r/20161218123229.22952-1-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:48 -08:00
Dave Jiang
11bac80004 mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmf
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.

Remove the vma parameter to simplify things.

[arnd@arndb.de: fix ARM build]
  Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:54 -08:00
Markus Elfring
843574a3ed KVM: Return an error code only as a constant in kvm_get_dirty_log()
* Return an error code without storing it in an intermediate variable.

* Delete the local variable "r" and the jump label "out" which became
  unnecessary with this refactoring.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-17 12:30:14 +01:00
Markus Elfring
58d6db3491 KVM: Return an error code only as a constant in kvm_get_dirty_log_protect()
* Return an error code without storing it in an intermediate variable.

* Delete the local variable "r" and the jump label "out" which became
  unnecessary with this refactoring.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-17 12:30:06 +01:00
Markus Elfring
f6a3b168e5 KVM: Return directly after a failed copy_from_user() in kvm_vm_compat_ioctl()
* Return directly after a call of the function "copy_from_user" failed
  in a case block.

  This issue was detected by using the Coccinelle software.

* Delete the jump label "out" which became unnecessary with
  this refactoring.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-17 12:29:42 +01:00
Cao, Lei
bbd6411513 KVM: Support vCPU-based gfn->hva cache
Provide versions of struct gfn_to_hva_cache functions that
take vcpu as a parameter instead of struct kvm.  The existing functions
are not needed anymore, so delete them.  This allows dirty pages to
be logged in the vcpu dirty ring, instead of the global dirty ring,
for ring-based dirty memory tracking.

Signed-off-by: Lei Cao <lei.cao@stratus.com>
Message-Id: <CY1PR08MB19929BD2AC47A291FD680E83F04F0@CY1PR08MB1992.namprd08.prod.outlook.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16 18:42:46 +01:00
Paolo Bonzini
4bd518f159 KVM: use separate generations for each address space
This will make it easier to support multiple address spaces in
kvm_gfn_to_hva_cache_init.  Instead of having to check the address
space id, we can keep on checking just the generation number.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16 18:42:41 +01:00
Paolo Bonzini
5a2d4365d2 KVM: only retrieve memslots once when initializing cache
This will make it a bit simpler to handle multiple address spaces
in gfn_to_hva_cache.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16 18:42:33 +01:00
Jintack Lim
7b6b46311a KVM: arm/arm64: Emulate the EL1 phys timer registers
Emulate read and write operations to CNTP_TVAL, CNTP_CVAL and CNTP_CTL.
Now VMs are able to use the EL1 physical timer.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08 15:13:37 +00:00
Jintack Lim
f242adaf0c KVM: arm/arm64: Set up a background timer for the physical timer emulation
Set a background timer for the EL1 physical timer emulation while VMs
are running, so that VMs get the physical timer interrupts in a timely
manner.

Schedule the background timer on entry to the VM and cancel it on exit.
This would not have any performance impact to the guest OSes that
currently use the virtual timer since the physical timer is always not
enabled.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08 15:13:36 +00:00
Jintack Lim
fb280e9757 KVM: arm/arm64: Set a background timer to the earliest timer expiration
When scheduling a background timer, consider both of the virtual and
physical timer and pick the earliest expiration time.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08 15:13:35 +00:00
Jintack Lim
58e0c9732a KVM: arm/arm64: Update the physical timer interrupt level
Now that we maintain the EL1 physical timer register states of VMs,
update the physical timer interrupt level along with the virtual one.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08 15:13:35 +00:00
Jintack Lim
a91d18551e KVM: arm/arm64: Initialize the emulated EL1 physical timer
Initialize the emulated EL1 physical timer with the default irq number.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08 15:13:34 +00:00
Jintack Lim
9171fa2e09 KVM: arm/arm64: Decouple kvm timer functions from virtual timer
Now that we have a separate structure for timer context, make functions
generic so that they can work with any timer context, not just the
virtual timer context.  This does not change the virtual timer
functionality.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08 15:13:33 +00:00
Jintack Lim
90de943a43 KVM: arm/arm64: Move cntvoff to each timer context
Make cntvoff per each timer context. This is helpful to abstract kvm
timer functions to work with timer context without considering timer
types (e.g. physical timer or virtual timer).

This also would pave the way for ever doing adjustments of the cntvoff
on a per-CPU basis if that should ever make sense.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08 15:13:33 +00:00
Jintack Lim
fbb4aeec5f KVM: arm/arm64: Abstract virtual timer context into separate structure
Abstract virtual timer context into a separate structure and change all
callers referring to timer registers, irq state and so on. No change in
functionality.

This is about to become very handy when adding the EL1 physical timer.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08 15:13:32 +00:00
Shanker Donthineni
0bdbf3b071 KVM: arm/arm64: vgic: Stop injecting the MSI occurrence twice
The IRQFD framework calls the architecture dependent function
twice if the corresponding GSI type is edge triggered. For ARM,
the function kvm_set_msi() is getting called twice whenever the
IRQFD receives the event signal. The rest of the code path is
trying to inject the MSI without any validation checks. No need
to call the function vgic_its_inject_msi() second time to avoid
an unnecessary overhead in IRQ queue logic. It also avoids the
possibility of VM seeing the MSI twice.

Simple fix, return -1 if the argument 'level' value is zero.

Cc: stable@vger.kernel.org
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08 15:13:14 +00:00
Christoffer Dall
11710dec8a KVM: arm/arm64: Remove kvm_vgic_inject_mapped_irq
The only benefit of having kvm_vgic_inject_mapped_irq separate from
kvm_vgic_inject_irq is that we pass a boolean that we use for error
checking on the injection path.

While this could potentially help in some aspect of robustness, it's
also a little bit of a defensive move, and arguably callers into the
vgic should have make sure they have marked their virtual IRQs as mapped
if required.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-02-01 11:56:35 +01:00
Vijaya Kumar K
e96a006cb0 KVM: arm/arm64: vgic: Implement KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO ioctl
Userspace requires to store and restore of line_level for
level triggered interrupts using ioctl KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-30 13:47:29 +00:00
Vijaya Kumar K
d017d7b0bd KVM: arm/arm64: vgic: Implement VGICv3 CPU interface access
VGICv3 CPU interface registers are accessed using
KVM_DEV_ARM_VGIC_CPU_SYSREGS ioctl. These registers are accessed
as 64-bit. The cpu MPIDR value is passed along with register id.
It is used to identify the cpu for registers access.

The VM that supports SEIs expect it on destination machine to handle
guest aborts and hence checked for ICC_CTLR_EL1.SEIS compatibility.
Similarly, VM that supports Affinity Level 3 that is required for AArch64
mode, is required to be supported on destination machine. Hence checked
for ICC_CTLR_EL1.A3V compatibility.

The arch/arm64/kvm/vgic-sys-reg-v3.c handles read and write of VGIC
CPU registers for AArch64.

For AArch32 mode, arch/arm/kvm/vgic-v3-coproc.c file is created but
APIs are not implemented.

Updated arch/arm/include/uapi/asm/kvm.h with new definitions
required to compile for AArch32.

The version of VGIC v3 specification is defined here
Documentation/virtual/kvm/devices/arm-vgic-v3.txt

Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-30 13:47:25 +00:00
Vijaya Kumar K
5fb247d79c KVM: arm/arm64: vgic: Introduce VENG0 and VENG1 fields to vmcr struct
ICC_VMCR_EL2 supports virtual access to ICC_IGRPEN1_EL1.Enable
and ICC_IGRPEN0_EL1.Enable fields. Add grpen0 and grpen1 member
variables to struct vmcr to support read and write of these fields.

Also refactor vgic_set_vmcr and vgic_get_vmcr() code.
Drop ICH_VMCR_CTLR_SHIFT and ICH_VMCR_CTLR_MASK macros and instead
use ICH_VMCR_EOI* and ICH_VMCR_CBPR* macros.

Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-30 13:47:21 +00:00
Vijaya Kumar K
94574c9488 KVM: arm/arm64: vgic: Add distributor and redistributor access
VGICv3 Distributor and Redistributor registers are accessed using
KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_REDIST_REGS
with KVM_SET_DEVICE_ATTR and KVM_GET_DEVICE_ATTR ioctls.
These registers are accessed as 32-bit and cpu mpidr
value passed along with register offset is used to identify the
cpu for redistributor registers access.

The version of VGIC v3 specification is defined here
Documentation/virtual/kvm/devices/arm-vgic-v3.txt

Also update arch/arm/include/uapi/asm/kvm.h to compile for
AArch32 mode.

Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-30 13:47:07 +00:00
Vijaya Kumar K
2df903a89a KVM: arm/arm64: vgic: Implement support for userspace access
Read and write of some registers like ISPENDR and ICPENDR
from userspace requires special handling when compared to
guest access for these registers.

Refer to Documentation/virtual/kvm/devices/arm-vgic-v3.txt
for handling of ISPENDR, ICPENDR registers handling.

Add infrastructure to support guest and userspace read
and write for the required registers
Also moved vgic_uaccess from vgic-mmio-v2.c to vgic-mmio.c

Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-30 13:47:02 +00:00
Christoffer Dall
10f92c4c53 KVM: arm/arm64: vgic: Add debugfs vgic-state file
Add a file to debugfs to read the in-kernel state of the vgic.  We don't
do any locking of the entire VGIC state while traversing all the IRQs,
so if the VM is running the user/developer may not see a quiesced state,
but should take care to pause the VM using facilities in user space for
that purpose.

We also don't support LPIs yet, but they can be added easily if needed.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-01-25 13:50:03 +01:00
Christoffer Dall
8694e4da66 KVM: arm/arm64: Remove struct vgic_irq pending field
One of the goals behind the VGIC redesign was to get rid of cached or
intermediate state in the data structures, but we decided to allow
ourselves to precompute the pending value of an IRQ based on the line
level and pending latch state.  However, this has now become difficult
to base proper GICv3 save/restore on, because there is a potential to
modify the pending state without knowing if an interrupt is edge or
level configured.

See the following post and related message for more background:
https://lists.cs.columbia.edu/pipermail/kvmarm/2017-January/023195.html

This commit gets rid of the precomputed pending field in favor of a
function that calculates the value when needed, irq_is_pending().

The soft_pending field is renamed to pending_latch to represent that
this latch is the equivalent hardware latch which gets manipulated by
the input signal for edge-triggered interrupts and when writing to the
SPENDR/CPENDR registers.

After this commit save/restore code should be able to simply restore the
pending_latch state, line_level state, and config state in any order and
get the desired result.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-01-25 13:26:13 +01:00
Radim Krčmář
1b1973ef9a KVM/ARM updates for 4.10-rc4
- Fix for timer setup on VHE machines
 - Drop spurious warning when the timer races against
   the vcpu running again
 - Prevent a vgic deadlock when the initialization fails
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYeLkqAAoJECPQ0LrRPXpDpasP/iynAP2/28LNQ7L8r3be0m7N
 PCZv3gpsTtu1cmTlpiPQVPqzBUVPXQMJJAnDIhA7e1YbYfYJUIhEirVUQ56oT+lY
 nmnoquzNFGUNkYRHUj8RTeQ8ISuP/iPlWOVlSh4n2rbrHFAxX1+W1xXdOedbdFJp
 oFDRR6DCB4qdIxt7dtTcfObhwVlro8WDOfClNqiUDUdhxfDBD7mEPYNO2J2D0/ca
 6YQAkxPzP/MJgKl0mVRjjxhkoNSt6lP0uyU65X67g7i2ZlFRyU3PvqwPm3JOY++V
 Uuff2ud81D5yYwf0+6sA+i+707jezgsoiuFnwUFQVjW/9rpIK7W1gzqht2VWZNgJ
 NjhFPtNhOFkam/sxPFiSaTNyhUNgrg6C/qPDBF0pPlyGd0mtrvJdVG4y/R9YGSB3
 JoiwaFdoi9buEakpRbhu4y5bhcDZZPAo+l+2OanpeE6y3zypqTsJRop8H/qhnv8R
 FFzqycBjeEcVo9ZKIpqQVEnp0njBcHKmqblMswgSgGKe3816iGC+kj4oMm7J57Yq
 vy1OKQMuur+rSRyH7LpVN1HYiq9yBHdbHsXxUjEWSD5dtPAGdOhAP0kAzXlPbEot
 WkVQO2uEV3EKs0UQjWkLKNVJKh/pPaWH3z8ENRlf+pASzvO+UYRmY3sjfDcg3AsI
 7Lxc+CVJJ4ExJbFe/OTk
 =7cIH
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm

KVM/ARM updates for 4.10-rc4

- Fix for timer setup on VHE machines
- Drop spurious warning when the timer races against
  the vcpu running again
- Prevent a vgic deadlock when the initialization fails
2017-01-17 15:04:59 +01:00
Marc Zyngier
1193e6aeec KVM: arm/arm64: vgic: Fix deadlock on error handling
Dmitry Vyukov reported that the syzkaller fuzzer triggered a
deadlock in the vgic setup code when an error was detected, as
the cleanup code tries to take a lock that is already held by
the setup code.

The fix is to avoid retaking the lock when cleaning up, by
telling the cleanup function that we already hold it.

Cc: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-13 11:19:35 +00:00
Jintack Lim
488f94d721 KVM: arm64: Access CNTHCTL_EL2 bit fields correctly on VHE systems
Current KVM world switch code is unintentionally setting wrong bits to
CNTHCTL_EL2 when E2H == 1, which may allow guest OS to access physical
timer.  Bit positions of CNTHCTL_EL2 are changing depending on
HCR_EL2.E2H bit.  EL1PCEN and EL1PCTEN are 1st and 0th bits when E2H is
not set, but they are 11th and 10th bits respectively when E2H is set.

In fact, on VHE we only need to set those bits once, not for every world
switch. This is because the host kernel runs in EL2 with HCR_EL2.TGE ==
1, which makes those bits have no effect for the host kernel execution.
So we just set those bits once for guests, and that's it.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-13 11:19:25 +00:00
Christoffer Dall
63e41226af KVM: arm/arm64: Fix occasional warning from the timer work function
When a VCPU blocks (WFI) and has programmed the vtimer, we program a
soft timer to expire in the future to wake up the vcpu thread when
appropriate.  Because such as wake up involves a vcpu kick, and the
timer expire function can get called from interrupt context, and the
kick may sleep, we have to schedule the kick in the work function.

The work function currently has a warning that gets raised if it turns
out that the timer shouldn't fire when it's run, which was added because
the idea was that in that case the work should never have been cancelled.

However, it turns out that this whole thing is racy and we can get
spurious warnings.  The problem is that we clear the armed flag in the
work function, which may run in parallel with the
kvm_timer_unschedule->timer_disarm() call.  This results in a possible
situation where the timer_disarm() call does not call
cancel_work_sync(), which effectively synchronizes the completion of the
work function with running the VCPU.  As a result, the VCPU thread
proceeds before the work function completees, causing changes to the
timer state such that kvm_timer_should_fire(vcpu) returns false in the
work function.

All we do in the work function is to kick the VCPU, and an occasional
rare extra kick never harmed anyone.  Since the race above is extremely
rare, we don't bother checking if the race happens but simply remove the
check and the clearing of the armed flag from the work function.

Reported-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-13 11:15:30 +00:00
Wanpeng Li
4f3dbdf47e KVM: eventfd: fix NULL deref irqbypass consumer
Reported syzkaller:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
    IP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass]
    PGD 0

    Oops: 0002 [#1] SMP
    CPU: 1 PID: 125 Comm: kworker/1:1 Not tainted 4.9.0+ #1
    Workqueue: kvm-irqfd-cleanup irqfd_shutdown [kvm]
    task: ffff9bbe0dfbb900 task.stack: ffffb61802014000
    RIP: 0010:irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass]
    Call Trace:
     irqfd_shutdown+0x66/0xa0 [kvm]
     process_one_work+0x16b/0x480
     worker_thread+0x4b/0x500
     kthread+0x101/0x140
     ? process_one_work+0x480/0x480
     ? kthread_create_on_node+0x60/0x60
     ret_from_fork+0x25/0x30
    RIP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass] RSP: ffffb61802017e20
    CR2: 0000000000000008

The syzkaller folks reported a NULL pointer dereference that due to
unregister an consumer which fails registration before. The syzkaller
creates two VMs w/ an equal eventfd occasionally. So the second VM
fails to register an irqbypass consumer. It will make irqfd as inactive
and queue an workqueue work to shutdown irqfd and unregister the irqbypass
consumer when eventfd is closed. However, the second consumer has been
initialized though it fails registration. So the token(same as the first
VM's) is taken to unregister the consumer through the workqueue, the
consumer of the first VM is found and unregistered, then NULL deref incurred
in the path of deleting consumer from the consumers list.

This patch fixes it by making irq_bypass_register/unregister_consumer()
looks for the consumer entry based on consumer pointer itself instead of
token matching.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-12 14:42:34 +01:00
Linus Torvalds
3ddc76dfc7 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer type cleanups from Thomas Gleixner:
 "This series does a tree wide cleanup of types related to
  timers/timekeeping.

   - Get rid of cycles_t and use a plain u64. The type is not really
     helpful and caused more confusion than clarity

   - Get rid of the ktime union. The union has become useless as we use
     the scalar nanoseconds storage unconditionally now. The 32bit
     timespec alike storage got removed due to the Y2038 limitations
     some time ago.

     That leaves the odd union access around for no reason. Clean it up.

  Both changes have been done with coccinelle and a small amount of
  manual mopping up"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ktime: Get rid of ktime_equal()
  ktime: Cleanup ktime_set() usage
  ktime: Get rid of the union
  clocksource: Use a plain u64 instead of cycle_t
2016-12-25 14:30:04 -08:00
Linus Torvalds
b272f732f8 Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP hotplug notifier removal from Thomas Gleixner:
 "This is the final cleanup of the hotplug notifier infrastructure. The
  series has been reintgrated in the last two days because there came a
  new driver using the old infrastructure via the SCSI tree.

  Summary:

   - convert the last leftover drivers utilizing notifiers

   - fixup for a completely broken hotplug user

   - prevent setup of already used states

   - removal of the notifiers

   - treewide cleanup of hotplug state names

   - consolidation of state space

  There is a sphinx based documentation pending, but that needs review
  from the documentation folks"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/armada-xp: Consolidate hotplug state space
  irqchip/gic: Consolidate hotplug state space
  coresight/etm3/4x: Consolidate hotplug state space
  cpu/hotplug: Cleanup state names
  cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions
  staging/lustre/libcfs: Convert to hotplug state machine
  scsi/bnx2i: Convert to hotplug state machine
  scsi/bnx2fc: Convert to hotplug state machine
  cpu/hotplug: Prevent overwriting of callbacks
  x86/msr: Remove bogus cleanup from the error path
  bus: arm-ccn: Prevent hotplug callback leak
  perf/x86/intel/cstate: Prevent hotplug callback leak
  ARM/imx/mmcd: Fix broken cpu hotplug handling
  scsi: qedi: Convert to hotplug state machine
2016-12-25 14:05:56 -08:00
Thomas Gleixner
a5a1d1c291 clocksource: Use a plain u64 instead of cycle_t
There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
2016-12-25 11:04:12 +01:00
Thomas Gleixner
73c1b41e63 cpu/hotplug: Cleanup state names
When the state names got added a script was used to add the extra argument
to the calls. The script basically converted the state constant to a
string, but the cleanup to convert these strings into meaningful ones did
not happen.

Replace all the useless strings with 'subsys/xxx/yyy:state' strings which
are used in all the other places already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25 10:47:44 +01:00
Linus Torvalds
7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Lorenzo Stoakes
8b7457ef9a mm: unexport __get_user_pages_unlocked()
Unexport the low-level __get_user_pages_unlocked() function and replaces
invocations with calls to more appropriate higher-level functions.

In hva_to_pfn_slow() we are able to replace __get_user_pages_unlocked()
with get_user_pages_unlocked() since we can now pass gup_flags.

In async_pf_execute() and process_vm_rw_single_vec() we need to pass
different tsk, mm arguments so get_user_pages_remote() is the sane
replacement in these cases (having added manual acquisition and release
of mmap_sem.)

Additionally get_user_pages_remote() reintroduces use of the FOLL_TOUCH
flag.  However, this flag was originally silently dropped by commit
1e9877902d ("mm/gup: Introduce get_user_pages_remote()"), so this
appears to have been unintentional and reintroducing it is therefore not
an issue.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20161027095141.2569-3-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:09 -08:00
Linus Torvalds
93173b5bf2 Small release, the most interesting stuff is x86 nested virt improvements.
x86: userspace can now hide nested VMX features from guests; nested
 VMX can now run Hyper-V in a guest; support for AVX512_4VNNIW and
 AVX512_FMAPS in KVM; infrastructure support for virtual Intel GPUs.
 
 PPC: support for KVM guests on POWER9; improved support for interrupt
 polling; optimizations and cleanups.
 
 s390: two small optimizations, more stuff is in flight and will be
 in 4.11.
 
 ARM: support for the GICv3 ITS on 32bit platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQExBAABCAAbBQJYTkP0FBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
 lZIH/iT1n9OQXcuTpYYnQhuCenzI3GZZOIMTbCvK2i5bo0FIJKxVn0EiAAqZSXvO
 nO185FqjOgLuJ1AD1kJuxzye5suuQp4HIPWWgNHcexLuy43WXWKZe0IQlJ4zM2Xf
 u31HakpFmVDD+Cd1qN3yDXtDrRQ79/xQn2kw7CWb8olp+pVqwbceN3IVie9QYU+3
 gCz0qU6As0aQIwq2PyalOe03sO10PZlm4XhsoXgWPG7P18BMRhNLTDqhLhu7A/ry
 qElVMANT7LSNLzlwNdpzdK8rVuKxETwjlc1UP8vSuhrwad4zM2JJ1Exk26nC2NaG
 D0j4tRSyGFIdx6lukZm7HmiSHZ0=
 =mkoB
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "Small release, the most interesting stuff is x86 nested virt
  improvements.

  x86:
   - userspace can now hide nested VMX features from guests
   - nested VMX can now run Hyper-V in a guest
   - support for AVX512_4VNNIW and AVX512_FMAPS in KVM
   - infrastructure support for virtual Intel GPUs.

  PPC:
   - support for KVM guests on POWER9
   - improved support for interrupt polling
   - optimizations and cleanups.

  s390:
   - two small optimizations, more stuff is in flight and will be in
     4.11.

  ARM:
   - support for the GICv3 ITS on 32bit platforms"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits)
  arm64: KVM: pmu: Reset PMSELR_EL0.SEL to a sane value before entering the guest
  KVM: arm/arm64: timer: Check for properly initialized timer on init
  KVM: arm/arm64: vgic-v2: Limit ITARGETSR bits to number of VCPUs
  KVM: x86: Handle the kthread worker using the new API
  KVM: nVMX: invvpid handling improvements
  KVM: nVMX: check host CR3 on vmentry and vmexit
  KVM: nVMX: introduce nested_vmx_load_cr3 and call it on vmentry
  KVM: nVMX: propagate errors from prepare_vmcs02
  KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT
  KVM: nVMX: load GUEST_EFER after GUEST_CR0 during emulated VM-entry
  KVM: nVMX: generate MSR_IA32_CR{0,4}_FIXED1 from guest CPUID
  KVM: nVMX: fix checks on CR{0,4} during virtual VMX operation
  KVM: nVMX: support restore of VMX capability MSRs
  KVM: nVMX: generate non-true VMX MSRs based on true versions
  KVM: x86: Do not clear RFLAGS.TF when a singlestep trap occurs.
  KVM: x86: Add kvm_skip_emulated_instruction and use it.
  KVM: VMX: Move skip_emulated_instruction out of nested_vmx_check_vmcs12
  KVM: VMX: Reorder some skip_emulated_instruction calls
  KVM: x86: Add a return value to kvm_emulate_cpuid
  KVM: PPC: Book3S: Move prototypes for KVM functions into kvm_ppc.h
  ...
2016-12-13 15:47:02 -08:00
Linus Torvalds
edc5f445a6 VFIO updates for v4.10-rc1
- VFIO updates for v4.10 primarily include a new Mediated Device
    interface, which essentially allows software defined devices to be
    exposed to users through VFIO.  The host vendor driver providing
    this virtual device polices, or mediates user access to the device.
    These devices often incorporate portions of real devices, for
    instance the primary initial users of this interface expose vGPUs
    which allow the user to map mediated devices, or mdevs, to a
    portion of a physical GPU.  QEMU composes these mdevs into PCI
    representations using the existing VFIO user API.  This enables
    both Intel KVM-GT support, which is also expected to arrive into
    Linux mainline during the v4.10 merge window, as well as NVIDIA
    vGPU, and also Channel I/O devices (aka CCW devices) for s390
    virtualization support. (Kirti Wankhede, Neo Jia)
 
  - Drop unnecessary uses of pcibios_err_to_errno() (Cao Jin)
 
  - Fixes to VFIO capability chain handling (Eric Auger)
 
  - Error handling fixes for fallout from mdev (Christophe JAILLET)
 
  - Notifiers to expose struct kvm to mdev vendor drivers (Jike Song)
 
  - type1 IOMMU model search fixes (Kirti Wankhede, Neo Jia)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJYSyCtAAoJECObm247sIsi+rIP/3Q/GE3zaDdz1iKQK/c/qhs6
 0Pl45opAqw4wCJDCZIhRmoHmsCaT4KkeJKU1fiYc0mKJhW11HfA4DTFwzBqrHBj7
 7wPjHTaWwlFRHCYVCWYEp5g9UASyD8ubWGyZKzqIXELFoAvwuBL3SULNj4neJKKR
 rPcHTVxJ7laYIjHFzuNUi/MWEdjxPT9oJn8Bm9mhISwPglIMU9nkIR20ChaSeFJb
 MiFqFW7BcvkVyqupjpksM9DodpNZu+3uSMVtgASNVNbilf0FXJr0d8RCbeSxTIfm
 rEsZ5+0PrklhCtmRRl5EB+tNawgaism8wAF74KIO//76vE02Usrxb0b5mTIZ8TiN
 6/Z+WID5D+ZRt8hp9hJIJmGE/sM/odH4r174dPaiEkMvOB9ksDIPkzgbtDbVY40c
 DACb7/n3ZZA0an2Eq2HEx/BqTOvt9sgu367KVvhuoIArQcb5SM94GT03Dv+pKnax
 Cxmro2oaWmAV3IS0vNzbCIddsFqlPjkFIYxjtzBy+bVLg2RN3STyaSL6cwJsydSU
 KLcCPiYtovczKFj7RJlgVlqh5/8uZ7SEffTkIggehdnVPAfDlK9p9BYqLCgAoWpN
 vwWidM3qOIjooRXQgxUwJgJsl4MLRMoA/gFP4iHbqOgIAGtUDRHuQ4muvkf+LLxg
 wpgfXsBQNRuVcZHBUEVe
 =gc6j
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v4.10-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

 - VFIO updates for v4.10 primarily include a new Mediated Device
   interface, which essentially allows software defined devices to be
   exposed to users through VFIO. The host vendor driver providing this
   virtual device polices, or mediates user access to the device.

   These devices often incorporate portions of real devices, for
   instance the primary initial users of this interface expose vGPUs
   which allow the user to map mediated devices, or mdevs, to a portion
   of a physical GPU. QEMU composes these mdevs into PCI representations
   using the existing VFIO user API. This enables both Intel KVM-GT
   support, which is also expected to arrive into Linux mainline during
   the v4.10 merge window, as well as NVIDIA vGPU, and also Channel I/O
   devices (aka CCW devices) for s390 virtualization support. (Kirti
   Wankhede, Neo Jia)

 - Drop unnecessary uses of pcibios_err_to_errno() (Cao Jin)

 - Fixes to VFIO capability chain handling (Eric Auger)

 - Error handling fixes for fallout from mdev (Christophe JAILLET)

 - Notifiers to expose struct kvm to mdev vendor drivers (Jike Song)

 - type1 IOMMU model search fixes (Kirti Wankhede, Neo Jia)

* tag 'vfio-v4.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits)
  vfio iommu type1: Fix size argument to vfio_find_dma() in pin_pages/unpin_pages
  vfio iommu type1: Fix size argument to vfio_find_dma() during DMA UNMAP.
  vfio iommu type1: WARN_ON if notifier block is not unregistered
  kvm: set/clear kvm to/from vfio_group when group add/delete
  vfio: support notifier chain in vfio_group
  vfio: vfio_register_notifier: classify iommu notifier
  vfio: Fix handling of error returned by 'vfio_group_get_from_dev()'
  vfio: fix vfio_info_cap_add/shift
  vfio/pci: Drop unnecessary pcibios_err_to_errno()
  MAINTAINERS: Add entry VFIO based Mediated device drivers
  docs: Sample driver to demonstrate how to use Mediated device framework.
  docs: Sysfs ABI for mediated device framework
  docs: Add Documentation for Mediated devices
  vfio: Define device_api strings
  vfio_platform: Updated to use vfio_set_irqs_validate_and_prepare()
  vfio_pci: Updated to use vfio_set_irqs_validate_and_prepare()
  vfio: Introduce vfio_set_irqs_validate_and_prepare()
  vfio_pci: Update vfio_pci to use vfio_info_add_capability()
  vfio: Introduce common function to add capabilities
  vfio iommu: Add blocking notifier to notify DMA_UNMAP
  ...
2016-12-13 09:23:56 -08:00
Paolo Bonzini
f673b5b2a6 KVM/ARM updates for 4.10:
- Support for the GICv3 ITS on 32bit platforms
 - A handful of timer and GIC emulation fixes
 - A PMU architecture fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYStI0AAoJECPQ0LrRPXpD6kcP/0J+fynLo/uhe3VAP7pZ0fH5
 dFmvcgZaHQ6wpWgkHYbyuAkZ2tiQfthylErjt9Xay2qf3f0BZScsNKSkTOmVTOJH
 NO+4yo7YDIbRbQO3h+QX2YB3uBqdZvn6eRLCDWNLwSa/GkNmLGvhcorQer0GduCl
 qnsRRrNIewzSYI+U3821jVUjLgXuBuGoFt0yT/197ZBRIrowNJ4vqAvaqVaLQ4jt
 aOd+aCPKCaatkeewEo6Es4lX86JOytpxtVfNpRe6/gSr1mK2fHAfycQ5Txkl7oTX
 T/vsYUusYDSJbiz7PUMFBfNYvVijBY8QCtm6yJZHQNg6q25r3pjn//3BiuSDf4Dz
 o0DDMoFPjEi23myfGI91oeL9Svbtk06ERGyN7MY2vMNtORrwhmgNiSfIsqI9V0d8
 Slru3REMZg+ZbY6rgyJZa9/09vlwKfqZpkwJlfQkJO9tsXn4WwwdyvwIXmaH9p5X
 mqnjgbIMRipBs5Teedb++pC5XQcbC8ed2KMEBXlgORDm6fC0Pz/q623tVRYhIm4B
 4YKHI1A8I8XaYd0VJkZOns2Uq7/Uwc2j5wGWRIa0IwB6LXlzNw4kbD+omj0Mmo0V
 Fxio610jyTfrPidx/XzO0zsEzVW794Si8S4F1nFShdkk1NuzClVnQzce5TA8K3Zu
 cCUKISR4oi5IWVcimDQt
 =zxXl
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/ARM updates for 4.10:

- Support for the GICv3 ITS on 32bit platforms
- A handful of timer and GIC emulation fixes
- A PMU architecture fix
2016-12-12 07:29:39 +01:00
Ingo Molnar
6f38751510 Merge branch 'linus' into locking/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-11 13:07:13 +01:00
Christoffer Dall
8e1a0476f8 KVM: arm/arm64: timer: Check for properly initialized timer on init
When the arch timer code fails to initialize (for example because the
memory mapped timer doesn't work, which is currently seen with the AEM
model), then KVM just continues happily with a final result that KVM
eventually does a NULL pointer dereference of the uninitialized cycle
counter.

Check directly for this in the init path and give the user a reasonable
error in this case.

Cc: Shih-Wei Li <shihwei@cs.columbia.edu>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-12-09 15:47:00 +00:00