Commit graph

12 commits

Author SHA1 Message Date
Stefan Richter
19593ffdb6 firewire: ohci: 0 may be a valid DMA address
I was told that there are obscure architectures with non-coherent DMA
which may DMA-map to bus address 0.  We shall not use 0 as a magic
number of uninitialized bus address variables.

The packet->payload_length > 0 test cannot be used either (except in
at_context_queue_packet) because local requests are not DMA-mapped
regardless of payload_length.  Hence add a state flag to struct
fw_packet.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-31 11:40:51 +01:00
Stefan Richter
cb7c96da36 firewire: core: optimize Topology Map creation
The Topology Map of the local node was created in CPU byte order,
then a temporary big endian copy was created to compute the CRC,
and when a read request to the Topology Map arrived it had to be
converted to big endian byte order again.

We now generate it in big endian byte order in the first place.
This also rids us of 1000 bytes stack usage in tasklet context.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter
8e85973efc firewire: optimize config ROM creation
The config ROM image of the local node was created in CPU byte order,
then a temporary big endian copy was created to compute the CRC, and
finally the card driver created its own big endian copy.

We now generate it in big endian byte order in the first place to avoid
one byte order conversion and the temporary on-stack copy of the ROM
image (1000 bytes stack usage in process context).  Furthermore, two
1000 bytes memset()s are replaced by one 1000 bytes - ROM length sized
memset.

The trivial fw_memcpy_{from,to}_be32() helpers are now superfluous and
removed.  The newly added __compute_block_crc() function will be folded
into fw_compute_block_crc() in a subsequent change.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter
18668ff9a3 firewire: core: header file cleanup
fw_card_get, fw_card_put, fw_card_release are currently not exported for
use outside the firewire-core.  Move their definitions/ declarations
from the subsystem header file to the core header file.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12 14:48:40 +02:00
Stefan Richter
6fdc037094 firewire: core: do not DMA-map stack addresses
The DMA mapping API cannot map on-stack addresses, as explained in
Documentation/DMA-mapping.txt.  Convert the two cases of on-stack packet
payload buffers in firewire-core (payload of lock requests in the bus
manager work and in iso resource management) to slab-allocated memory.

There are a number on-stack buffers for quadlet write or quadlet read
requests in firewire-core and firewire-sbp2.  These are harmless; they
are copied to/ from card driver internal DMA buffers since quadlet
payloads are inlined with packet headers.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-25 19:42:36 +02:00
Stefan Richter
5a124d382e firewire: net: allow for unordered unit discovery
Decouple the creation and destruction of the net_device from the order
of discovery and removal of nodes with RFC 2734 unit directories since
there is no reliable order.  The net_device is now created when the
first RFC 2734 unit on a card is discovered, and destroyed when the last
RFC 2734 unit on a card went away.  This includes all remote units as
well as the local unit, which is therefore tracked as a peer now too.

Also, locking around the list of peers is slightly extended to guard
against peer removal.  As a side effect, fwnet_peer.pdg_lock has become
superfluous and is deleted.

Peer data (max_rec, speed, node ID, generation) are updated more
carefully.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14 14:26:29 +02:00
Stefan Richter
f91e3bd842 firewire: net: style changes
Change names of types, variables, functions.
Omit debug code.
Use get_unaligned*, put_unaligned*.
Annotate big endian data.
Handle errors in __init.
Change whitespace.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14 14:26:29 +02:00
Jay Fenlason
c76acec6d5 firewire: add IPv4 support
Implement IPv4 over IEEE 1394 as per RFC 2734 for the newer firewire
stack.  This feature has only been present in the older ieee1394 stack
via the eth1394 driver.

Still to do:
  - fix ipv4_priv and ipv4_node lifetime logic
  - fix determination of speeds and max payloads
  - fix bus reset handling
  - fix unaligned memory accesses
  - fix coding style
  - further testing/ improvement of fragment reassembly
  - perhaps multicast support

Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, copyright note, changelog)
2009-06-14 14:26:28 +02:00
Stefan Richter
1e626fdcef firewire: core: use more outbound tlabels
Tlabel is a 6 bits wide datum.  Wrap it after 63 rather than 31 for more
safety against transaction label exhaustion and potential responders'
transaction layer bugs.  (As noted by Guus Sliepen, this change requires
an expansion of tlabel_mask to 64 bits.)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14 14:23:42 +02:00
Stefan Richter
837ec787d8 firewire: core: don't update Broadcast_Channel if RFC 2734 conditions aren't met
This extra check will avoid Broadcast_Channel register related traffic
to many IIDC, SBP-2, and AV/C devices which aren't IRMC or have a
max_rec < 8 (i.e. support < 512 bytes async payload).  This avoids a
little bit of traffic after bus reset and is even more careful with
devices which don't implement this CSR.

The assumption is that no other protocol than IP over 1394 uses the
broadcast channel for streams.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14 11:57:06 +02:00
Stefan Richter
e5110d011e firewire: add parent-of-unit accessor
Retrieval of an fw_unit's parent is a common pattern in high-level code.
Wrap it up as device = fw_parent_device(unit).

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-06 21:45:50 +02:00
Stefan Richter
77c9a5daa9 firewire: reorganize header files
The three header files of firewire-core, i.e.
 "drivers/firewire/fw-device.h",
 "drivers/firewire/fw-topology.h",
 "drivers/firewire/fw-transaction.h",
are replaced by
 "drivers/firewire/core.h",
 "include/linux/firewire.h".

The latter includes everything which a firewire high-level driver (like
firewire-sbp2) needs besides linux/firewire-constants.h, while core.h
contains the rest which is needed by firewire-core itself and by low-
level drivers (card drivers) like firewire-ohci.

High-level drivers can now also reside outside of drivers/firewire
without having to add drivers/firewire to the header file search path in
makefiles.  At least the firedtv driver will be such a driver.

I also considered to spread the contents of core.h over several files,
one for each .c file where the respective implementation resides.  But
it turned out that most core .c files will end up including most of the
core .h files.  Also, the combined core.h isn't unreasonably big, and it
will lose more of its contents to linux/firewire.h anyway soon when more
firewire drivers are added.  (IP-over-1394, firedtv, and there are plans
for one or two more.)

Furthermore, fw-ohci.h is renamed to ohci.h.  The name of core.h and
ohci.h is chosen with regard to name changes of the .c files in a
follow-up change.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-05 16:26:18 +02:00