I found a race involving the larp control knob, aka the debugging knob
that lets developers enable logging of extended attribute updates:
Thread 1 Thread 2
echo 0 > /sys/fs/xfs/debug/larp
setxattr(REPLACE)
xfs_has_larp (returns false)
xfs_attr_set
echo 1 > /sys/fs/xfs/debug/larp
xfs_attr_defer_replace
xfs_attr_init_replace_state
xfs_has_larp (returns true)
xfs_attr_init_remove_state
<oops, wrong DAS state!>
This isn't a particularly severe problem right now because xattr logging
is only enabled when CONFIG_XFS_DEBUG=y, and developers *should* know
what they're doing.
However, the eventual intent is that callers should be able to ask for
the assistance of the log in persisting xattr updates. This capability
might not be required for /all/ callers, which means that dynamic
control must work correctly. Once an xattr update has decided whether
or not to use logged xattrs, it needs to stay in that mode until the end
of the operation regardless of what subsequent parallel operations might
do.
Therefore, it is an error to continue sampling xfs_globals.larp once
xfs_attr_change has made a decision about larp, and it was not correct
for me to have told Allison that ->create_intent functions can sample
the global log incompat feature bitfield to decide to elide a log item.
Instead, create a new op flag for the xfs_da_args structure, and convert
all other callers of xfs_has_larp and xfs_sb_version_haslogxattrs within
the attr update state machine to look for the operations flag.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
This update includes:
- fix refcount leak in xfs_ifree()
- fix xfs_buf_cancel structure leaks in log recovery
- fix dquot leak after failed quota check
- fix a couple of problematic ASSERTS
- fix small aim7 perf regression in from new btree sibling
validation
- clean up log incompat feature marking for new logged attribute
feature
- disallow logged attributes on legacy V4 filesystem formats.
- fix da state leak when freeing attr intents
- improve validation of the attr log items in recovery
- use slab caches for commonly used attr structures
- fix leaks of attr name/value buffer and reduce copying overhead
during intent logging
- remove some dead debug code from log recovery
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEmJOoJ8GffZYWSjj/regpR/R1+h0FAmKX4ZUUHGRhdmlkQGZy
b21vcmJpdC5jb20ACgkQregpR/R1+h06gQ//X9786aR6rfeMprvrWLqY0Ui6mGz4
qI7s1BhsEyh6VMMzjVa0AzjX7R565ISTr4SdxLNewdPPAvro+avd2K4t+FdfFTG0
9cA4kgC5MoURljHZmflYB8EKGsLXQ2fuzDmih6Ozu4pmKhKc5QU3XpsLn2HzLded
KrNc08GX2JKvBxjdImk0pTxUq2xZ5CPWvpjdrfxnN2bNPHdJJtqBh/lhX1r73bqA
Tz0RLwUqbL7fUZfIeslDlu2rU/MlZDXhT7C81y6tnyg7ObNN35NXuZX/UfQKFIWR
pXUiPZTurso9Z7g7leEJ2Uco7Aeivs36mqes60Mv4YvN5ilv/Ja07kFZlfdaYkhJ
YYSeIod1QLH3aOJOImPjYpOFOjyHrXmdG5KS5iLqADokywCPfgDMxCVWKeKxtLCC
/1jBEQnKDWdZtAHup+vQ4PC1YP0rsLhXfNQNjYau8pwhEaN8nl2MOWMmQOLMyoES
VAsBV9zrCa60sPT5IdYgnkRG3C+QV7nwLoLluguS+XvWtBgB0zxqjSZG5jFYYgCr
v8VfW5esnvs+hF8YD3RmWpKxnoTuCXaftbc7ZdxneKZJyDPzWqr81zySCeBVCbt/
wWrkl5E3Mdhq+LHDcbnrRZ63W377aRiNAh5D+aIeJUm0HZoEP+VLqBRVnWOuv/LC
AfIuZcQi24PIZPw=
=OLD4
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.19-for-linus-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Dave Chinner:
"This update is largely bug fixes and cleanups for all the code merged
in the first pull request. The majority of them are to the new logged
attribute code, but there are also a couple of fixes for other log
recovery and memory leaks that have recently been found.
Summary:
- fix refcount leak in xfs_ifree()
- fix xfs_buf_cancel structure leaks in log recovery
- fix dquot leak after failed quota check
- fix a couple of problematic ASSERTS
- fix small aim7 perf regression in from new btree sibling validation
- clean up log incompat feature marking for new logged attribute
feature
- disallow logged attributes on legacy V4 filesystem formats.
- fix da state leak when freeing attr intents
- improve validation of the attr log items in recovery
- use slab caches for commonly used attr structures
- fix leaks of attr name/value buffer and reduce copying overhead
during intent logging
- remove some dead debug code from log recovery"
* tag 'xfs-5.19-for-linus-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (33 commits)
xfs: fix xfs_ifree() error handling to not leak perag ref
xfs: move xfs_attr_use_log_assist usage out of libxfs
xfs: move xfs_attr_use_log_assist out of xfs_log.c
xfs: warn about LARP once per mount
xfs: implement per-mount warnings for scrub and shrink usage
xfs: don't log every time we clear the log incompat flags
xfs: convert buf_cancel_table allocation to kmalloc_array
xfs: don't leak xfs_buf_cancel structures when recovery fails
xfs: refactor buffer cancellation table allocation
xfs: don't leak btree cursor when insrec fails after a split
xfs: purge dquots after inode walk fails during quotacheck
xfs: assert in xfs_btree_del_cursor should take into account error
xfs: don't assert fail on perag references on teardown
xfs: avoid unnecessary runtime sibling pointer endian conversions
xfs: share xattr name and value buffers when logging xattr updates
xfs: do not use logged xattr updates on V4 filesystems
xfs: Remove duplicate include
xfs: reduce IOCB_NOWAIT judgment for retry exclusive unaligned DIO
xfs: Remove dead code
xfs: fix typo in comment
...
This series contains a two key cleanups for the new LARP code. Most
of it is refactoring and tweaking the code that creates kernel log
messages about enabling and disabling features -- we should be
warning about LARP being turned on once per mount, instead of once
per insmod cycle; we shouldn't be spamming the logs so aggressively
about turning *off* log incompat features.
The second part of the series refactors the LARP code responsible
for getting (and releasing) permission to use xattr log items. The
implementation code doesn't belong in xfs_log.c, and calls to
logging functions don't belong in libxfs -- they really should be
done by the VFS implementation functions before they start calling
into libraries.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
As part of solving the memory leaks and UAF problems in the new LARP
code, kmemleak also reported that log recovery will leak the table
used to hash buffer cancellations if the recovery fails. Fix this
problem by creating alloc/free helpers that initialize and free the
hashtable contents correctly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
For some reason commit 9a5280b312 ("xfs: reorder iunlink remove
operation in xfs_ifree") replaced a jump to the exit path in the
event of an xfs_difree() error with a direct return, which skips
releasing the perag reference acquired at the top of the function.
Restore the original code to drop the reference on error.
Fixes: 9a5280b312 ("xfs: reorder iunlink remove operation in xfs_ifree")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The LARP patchset added an awkward coupling point between libxfs and
what would be libxlog, if the XFS log were actually its own library.
Move the code that sets up logged xattr updates out of libxfs and into
xfs_xattr.c so that libxfs no longer has to know about xlog_* functions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The LARP patchset added an awkward coupling point between libxfs and
what would be libxlog, if the XFS log were actually its own library.
Move the code that enables logged xattr updates out of "lib"xlog and into
xfs_xattr.c so that it no longer has to know about xlog_* functions.
While we're at it, give xfs_xattr.c its own header file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Since LARP is an experimental debug-only feature, we should try to warn
about it being in use once per mount, not once per reboot.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently, we don't have a consistent story around logging when an
EXPERIMENTAL feature gets turned on at runtime -- online fsck and shrink
log a message once per day across all mounts, and the recently merged
LARP mode only ever does it once per insmod cycle or reboot.
Because EXPERIMENTAL tags are supposed to go away eventually, convert
the existing daily warnings into state flags that travel with the mount,
and warn once per mount. Making this an opstate flag means that we'll
be able to capture the experimental usage in the ftrace output too.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There's no need to spam the logs every time we clear the log incompat
flags -- if someone is periodically using one of these features, they'll
be cleared every time the log tries to clean itself, which can get
pretty chatty:
$ dmesg | grep -i clear
[ 5363.894711] XFS (sdd): Clearing log incompat feature flags.
[ 5365.157516] XFS (sdd): Clearing log incompat feature flags.
[ 5369.388543] XFS (sdd): Clearing log incompat feature flags.
[ 5371.281246] XFS (sdd): Clearing log incompat feature flags.
These aren't high value messages either -- nothing's gone wrong, and
nobody's trying anything tricky.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
While we're messing around with how recovery allocates and frees the
buffer cancellation table, convert the allocation to use kmalloc_array
instead of the old kmem_alloc APIs, and make it handle a null return,
even though that's not likely.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Move the code that allocates and frees the buffer cancellation tables
used by log recovery into the file that actually uses the tables. This
is a precursor to some cleanups and a memory leak fix.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The recent patch to improve btree cycle checking caused a regression
when I rebased the in-memory btree branch atop the 5.19 for-next branch,
because in-memory short-pointer btrees do not have AG numbers. This
produced the following complaint from kmemleak:
unreferenced object 0xffff88803d47dde8 (size 264):
comm "xfs_io", pid 4889, jiffies 4294906764 (age 24.072s)
hex dump (first 32 bytes):
90 4d 0b 0f 80 88 ff ff 00 a0 bd 05 80 88 ff ff .M..............
e0 44 3a a0 ff ff ff ff 00 df 08 06 80 88 ff ff .D:.............
backtrace:
[<ffffffffa0388059>] xfbtree_dup_cursor+0x49/0xc0 [xfs]
[<ffffffffa029887b>] xfs_btree_dup_cursor+0x3b/0x200 [xfs]
[<ffffffffa029af5d>] __xfs_btree_split+0x6ad/0x820 [xfs]
[<ffffffffa029b130>] xfs_btree_split+0x60/0x110 [xfs]
[<ffffffffa029f6da>] xfs_btree_make_block_unfull+0x19a/0x1f0 [xfs]
[<ffffffffa029fada>] xfs_btree_insrec+0x3aa/0x810 [xfs]
[<ffffffffa029fff3>] xfs_btree_insert+0xb3/0x240 [xfs]
[<ffffffffa02cb729>] xfs_rmap_insert+0x99/0x200 [xfs]
[<ffffffffa02cf142>] xfs_rmap_map_shared+0x192/0x5f0 [xfs]
[<ffffffffa02cf60b>] xfs_rmap_map_raw+0x6b/0x90 [xfs]
[<ffffffffa0384a85>] xrep_rmap_stash+0xd5/0x1d0 [xfs]
[<ffffffffa0384dc0>] xrep_rmap_visit_bmbt+0xa0/0xf0 [xfs]
[<ffffffffa0384fb6>] xrep_rmap_scan_iext+0x56/0xa0 [xfs]
[<ffffffffa03850d8>] xrep_rmap_scan_ifork+0xd8/0x160 [xfs]
[<ffffffffa0385195>] xrep_rmap_scan_inode+0x35/0x80 [xfs]
[<ffffffffa03852ee>] xrep_rmap_find_rmaps+0x10e/0x270 [xfs]
I noticed that xfs_btree_insrec has a bunch of debug code that return
out of the function immediately, without freeing the "new" btree cursor
that can be returned when _make_block_unfull calls xfs_btree_split. Fix
the error return in this function to free the btree cursor.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs/434 and xfs/436 have been reporting occasional memory leaks of
xfs_dquot objects. These tests themselves were the messenger, not the
culprit, since they unload the xfs module, which trips the slub
debugging code while tearing down all the xfs slab caches:
=============================================================================
BUG xfs_dquot (Tainted: G W ): Objects remaining in xfs_dquot on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Slab 0xffffea000606de00 objects=30 used=5 fp=0xffff888181b78a78 flags=0x17ff80000010200(slab|head|node=0|zone=2|lastcpupid=0xfff)
CPU: 0 PID: 3953166 Comm: modprobe Tainted: G W 5.18.0-rc6-djwx #rc6 d5824be9e46a2393677bda868f9b154d917ca6a7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20171121_152543-x86-ol7-builder-01.us.oracle.com-4.el7.1 04/01/2014
Since we don't generally rmmod the xfs module between fstests, this
means that xfs/434 is really just the canary in the coal mine --
something leaked a dquot, but we don't know who. After days of pounding
on fstests with kmemleak enabled, I finally got it to spit this out:
unreferenced object 0xffff8880465654c0 (size 536):
comm "u10:4", pid 88, jiffies 4294935810 (age 29.512s)
hex dump (first 32 bytes):
60 4a 56 46 80 88 ff ff 58 ea e4 5c 80 88 ff ff `JVF....X..\....
00 e0 52 49 80 88 ff ff 01 00 01 00 00 00 00 00 ..RI............
backtrace:
[<ffffffffa0740f6c>] xfs_dquot_alloc+0x2c/0x530 [xfs]
[<ffffffffa07443df>] xfs_qm_dqread+0x6f/0x330 [xfs]
[<ffffffffa07462a2>] xfs_qm_dqget+0x132/0x4e0 [xfs]
[<ffffffffa0756bb0>] xfs_qm_quotacheck_dqadjust+0xa0/0x3e0 [xfs]
[<ffffffffa075724d>] xfs_qm_dqusage_adjust+0x35d/0x4f0 [xfs]
[<ffffffffa06c9068>] xfs_iwalk_ag_recs+0x348/0x5d0 [xfs]
[<ffffffffa06c95d3>] xfs_iwalk_run_callbacks+0x273/0x540 [xfs]
[<ffffffffa06c9e8d>] xfs_iwalk_ag+0x5ed/0x890 [xfs]
[<ffffffffa06ca22f>] xfs_iwalk_ag_work+0xff/0x170 [xfs]
[<ffffffffa06d22c9>] xfs_pwork_work+0x79/0x130 [xfs]
[<ffffffff81170bb2>] process_one_work+0x672/0x1040
[<ffffffff81171b1b>] worker_thread+0x59b/0xec0
[<ffffffff8118711e>] kthread+0x29e/0x340
[<ffffffff810032bf>] ret_from_fork+0x1f/0x30
Now we know that quotacheck is at fault, but even this report was
canaryish -- it was triggered by xfs/494, which doesn't actually mount
any filesystems. (kmemleak can be a little slow to notice leaks, even
with fstests repeatedly whacking it to look for them.) Looking at the
*previous* fstest, however, showed that the test run before xfs/494 was
xfs/117. The tipoff to the problem is in this excerpt from dmesg:
XFS (sda4): Quotacheck needed: Please wait.
XFS (sda4): Metadata corruption detected at xfs_dinode_verify.part.0+0xdb/0x7b0 [xfs], inode 0x119 dinode
XFS (sda4): Unmount and run xfs_repair
XFS (sda4): First 128 bytes of corrupted metadata buffer:
00000000: 49 4e 81 a4 03 02 00 00 00 00 00 00 00 00 00 00 IN..............
00000010: 00 00 00 01 00 00 00 00 00 90 57 54 54 1a 4c 68 ..........WTT.Lh
00000020: 81 f9 7d e1 6d ee 16 00 34 bd 7d e1 6d ee 16 00 ..}.m...4.}.m...
00000030: 34 bd 7d e1 6d ee 16 00 00 00 00 00 00 00 00 00 4.}.m...........
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 02 00 00 00 00 00 00 00 00 96 80 f3 ab ................
00000060: ff ff ff ff da 57 7b 11 00 00 00 00 00 00 00 03 .....W{.........
00000070: 00 00 00 01 00 00 00 10 00 00 00 00 00 00 00 08 ................
XFS (sda4): Quotacheck: Unsuccessful (Error -117): Disabling quotas.
The dinode verifier decided that the inode was corrupt, which causes
iget to return with EFSCORRUPTED. Since this happened during
quotacheck, it is obvious that the kernel aborted the inode walk on
account of the corruption error and disabled quotas. Unfortunately, we
neglect to purge the dquot cache before doing that, which is how the
dquots leaked.
The problems started 10 years ago in commit b84a3a, when the dquot lists
were converted to a radix tree, but the error handling behavior was not
correctly preserved -- in that commit, if the bulkstat failed and
usrquota was enabled, the bulkstat failure code would be overwritten by
the result of flushing all the dquots to disk. As long as that
succeeds, we'd continue the quota mount as if everything were ok, but
instead we're now operating with a corrupt inode and incorrect quota
usage counts. I didn't notice this bug in 2019 when I wrote commit
ebd126a, which changed quotacheck to skip the dqflush when the scan
doesn't complete due to inode walk failures.
Introduced-by: b84a3a9675 ("xfs: remove the per-filesystem list of dquots")
Fixes: ebd126a651 ("xfs: convert quotacheck to use the new iwalk functions")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs/538 on a 1kB block filesystem failed with this assert:
XFS: Assertion failed: cur->bc_btnum != XFS_BTNUM_BMAP || cur->bc_ino.allocated == 0 || xfs_is_shutdown(cur->bc_mp), file: fs/xfs/libxfs/xfs_btree.c, line: 448
The problem was that an allocation failed unexpectedly in
xfs_bmbt_alloc_block() after roughly 150,000 minlen allocation error
injections, resulting in an EFSCORRUPTED error being returned to
xfs_bmapi_write(). The error occurred on extent-to-btree format
conversion allocating the new root block:
RIP: 0010:xfs_bmbt_alloc_block+0x177/0x210
Call Trace:
<TASK>
xfs_btree_new_iroot+0xdf/0x520
xfs_btree_make_block_unfull+0x10d/0x1c0
xfs_btree_insrec+0x364/0x790
xfs_btree_insert+0xaa/0x210
xfs_bmap_add_extent_hole_real+0x1fe/0x9a0
xfs_bmapi_allocate+0x34c/0x420
xfs_bmapi_write+0x53c/0x9c0
xfs_alloc_file_space+0xee/0x320
xfs_file_fallocate+0x36b/0x450
vfs_fallocate+0x148/0x340
__x64_sys_fallocate+0x3c/0x70
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa
Why the allocation failed at this point is unknown, but is likely
that we ran the transaction out of reserved space and filesystem out
of space with bmbt blocks because of all the minlen allocations
being done causing worst case fragmentation of a large allocation.
Regardless of the cause, we've then called xfs_bmapi_finish() which
calls xfs_btree_del_cursor(cur, error) to tear down the cursor.
So we have a failed operation, error != 0, cur->bc_ino.allocated > 0
and the filesystem is still up. The assert fails to take into
account that allocation can fail with an error and the transaction
teardown will shut the filesystem down if necessary. i.e. the
assert needs to check "|| error != 0" as well, because at this point
shutdown is pending because the current transaction is dirty....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Not fatal, the assert is there to catch developer attention. I'm
seeing this occasionally during recoveryloop testing after a
shutdown, and I don't want this to stop an overnight recoveryloop
run as it is currently doing.
Convert the ASSERT to a XFS_IS_CORRUPT() check so it will dump a
corruption report into the log and cause a test failure that way,
but it won't stop the machine dead.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit dc04db2aa7 has caused a small aim7 regression, showing a
small increase in CPU usage in __xfs_btree_check_sblock() as a
result of the extra checking.
This is likely due to the endian conversion of the sibling poitners
being unconditional instead of relying on the compiler to endian
convert the NULL pointer at compile time and avoiding the runtime
conversion for this common case.
Rework the checks so that endian conversion of the sibling pointers
is only done if they are not null as the original code did.
.... and these need to be "inline" because the compiler completely
fails to inline them automatically like it should be doing.
$ size fs/xfs/libxfs/xfs_btree.o*
text data bss dec hex filename
51874 240 0 52114 cb92 fs/xfs/libxfs/xfs_btree.o.orig
51562 240 0 51802 ca5a fs/xfs/libxfs/xfs_btree.o.inline
Just when you think the tools have advanced sufficiently we don't
have to care about stuff like this anymore, along comes a reminder
that *our tools still suck*.
Fixes: dc04db2aa7 ("xfs: detect self referencing btree sibling pointers")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This update includes:
- support for printk message indexing.
- large extent counts to provide support for up to 2^47 data extents and 2^32
attribute extents, allowing us to scale beyond 4 billion data extents
to billions of xattrs per inode.
- conversion of various flags fields to be consistently declared as
unsigned bit fields.
- improvements to realtime extent accounting and converts them to per-cpu
counters to match all the other block and inode accounting.
- reworks core log formatting code to reduce iterations, have a shorter, cleaner
fast path and generally be easier to understand and maintain.
- improvements to rmap btree searches that reduce overhead by up
to 30% resulting in xfs_scrub runtime reductions of 15%.
- improvements to reflink that remove the size limitations in remapping operations
and greatly reduce the size of transaction reservations.
- reworks the minimum log size calculations to allow us to change transaction
reservations without changing the minimum supported log size.
- removal of quota warning support as it has never been used on Linux.
- intent whiteouts to allow us to cancel intents that are completed entirely
in memory rather than having use CPU and disk bandwidth formatting and writing
them into the journal when it is not necessary. This makes rmap, reflink and
extent freeing slightly more efficient, but provides massive improvements
for....
- Logged Attribute Replay feature support. This is a fundamental change to the
way we modify attributes, laying the foundation for future integration of
attribute modifications as part of other atomic transactional operations the
filesystem performs.
- Lots of cleanups and fixes for the logged attribute replay functionality.
-----BEGIN PGP SIGNATURE-----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=yUEM
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.19-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Dave Chinner:
"This is a big update with lots of new code. The summary below them
all, so I'll just touch on teh higlights. The two main new features
are Large Extent Counts and Logged Attribute Replay - these are two
new foundational features that we are building more complex future
features on top of.
For upcoming functionality, we need to be able to store hundreds of
millions of xattrs per inode. The Large Extent Count feature removes
the limits that prevent this scale of xattr storage, and while we were
modifying the on disk extent count format we also increased the number
of data extents we support per inode from 2^32 to 2^47.
We also need to be able to modify xattrs as part of larger atomic
transactions rather than as standalone transactions. The Logged
Attribute Replay feature introduces the infrastructure that allows us
to use intents to record the attribute modifications in the journal
before we start them, hence allowing other atomic transactions to log
attribute modification intents and then defer the actual modification
to later. If we then crash, log recovery then guarantees that the
attribute is replayed in the context of the atomic transaction that
logged the intent.
A significant chunk of the commits in this merge are for the base
attribute replay functionality along with fixes, improvements and
cleanups related to this new functioanlity. Allison deserves a big
round of thanks for her ongoing work to get this functionality into
XFS.
There are also many other smaller changes and improvements, so overall
this is one of the bigger XFS merge requests in some time.
I will be following up next week with another smaller pull request -
we already have another round of fixes and improvements to the logged
attribute replay functionality just about ready to go. They'll soak
and test over the next week, and I'll send a pull request for them
near the end of the merge window.
Summary:
- support for printk message indexing.
- large extent counts to provide support for up to 2^47 data extents
and 2^32 attribute extents, allowing us to scale beyond 4 billion
data extents to billions of xattrs per inode.
- conversion of various flags fields to be consistently declared as
unsigned bit fields.
- improvements to realtime extent accounting and converts them to
per-cpu counters to match all the other block and inode accounting.
- reworks core log formatting code to reduce iterations, have a
shorter, cleaner fast path and generally be easier to understand
and maintain.
- improvements to rmap btree searches that reduce overhead by up to
30% resulting in xfs_scrub runtime reductions of 15%.
- improvements to reflink that remove the size limitations in
remapping operations and greatly reduce the size of transaction
reservations.
- reworks the minimum log size calculations to allow us to change
transaction reservations without changing the minimum supported log
size.
- removal of quota warning support as it has never been used on
Linux.
- intent whiteouts to allow us to cancel intents that are completed
entirely in memory rather than having use CPU and disk bandwidth
formatting and writing them into the journal when it is not
necessary. This makes rmap, reflink and extent freeing slightly
more efficient, but provides massive improvements for....
- Logged Attribute Replay feature support. This is a fundamental
change to the way we modify attributes, laying the foundation for
future integration of attribute modifications as part of other
atomic transactional operations the filesystem performs.
- Lots of cleanups and fixes for the logged attribute replay
functionality"
* tag 'xfs-5.19-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (124 commits)
xfs: can't use kmem_zalloc() for attribute buffers
xfs: detect empty attr leaf blocks in xfs_attr3_leaf_verify
xfs: ATTR_REPLACE algorithm with LARP enabled needs rework
xfs: use XFS_DA_OP flags in deferred attr ops
xfs: remove xfs_attri_remove_iter
xfs: switch attr remove to xfs_attri_set_iter
xfs: introduce attr remove initial states into xfs_attr_set_iter
xfs: xfs_attr_set_iter() does not need to return EAGAIN
xfs: clean up final attr removal in xfs_attr_set_iter
xfs: remote xattr removal in xfs_attr_set_iter() is conditional
xfs: XFS_DAS_LEAF_REPLACE state only needed if !LARP
xfs: split remote attr setting out from replace path
xfs: consolidate leaf/node states in xfs_attr_set_iter
xfs: kill XFS_DAC_LEAF_ADDNAME_INIT
xfs: separate out initial attr_set states
xfs: don't set quota warning values
xfs: remove warning counters from struct xfs_dquot_res
xfs: remove quota warning limit from struct xfs_quota_limits
xfs: rework deferred attribute operation setup
xfs: make xattri_leaf_bp more useful
...
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first argument
like ->read_folio
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmKNMDUACgkQDpNsjXcp
gj4/mwf/bpHhXH4ZoNIvtUpTF6rZbqeffmc0VrbxCZDZ6igRnRPglxZ9H9v6L53O
7B0FBQIfxgNKHZpdqGdOkv8cjg/GMe/HJUbEy5wOakYPo4L9fZpHbDZ9HM2Eankj
xBqLIBgBJ7doKr+Y62DAN19TVD8jfRfVtli5mqXJoNKf65J7BkxljoTH1L3EXD9d
nhLAgyQjR67JQrT/39KMW+17GqLhGefLQ4YnAMONtB6TVwX/lZmigKpzVaCi4r26
bnk5vaR/3PdjtNxIoYvxdc71y2Eg05n2jEq9Wcy1AaDv/5vbyZUlZ2aBSaIVbtKX
WfrhN9O3L0bU5qS7p9PoyfLc9wpq8A==
=djLv
-----END PGP SIGNATURE-----
Merge tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache
Pull page cache updates from Matthew Wilcox:
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first
argument like ->read_folio
* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
nilfs2: Fix some kernel-doc comments
Appoint myself page cache maintainer
fs: Remove aops->freepage
secretmem: Convert to free_folio
nfs: Convert to free_folio
orangefs: Convert to free_folio
fs: Add free_folio address space operation
fs: Convert drop_buffers() to use a folio
fs: Change try_to_free_buffers() to take a folio
jbd2: Convert release_buffer_page() to use a folio
jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
reiserfs: Convert release_buffer_page() to use a folio
fs: Remove last vestiges of releasepage
ubifs: Convert to release_folio
reiserfs: Convert to release_folio
orangefs: Convert to release_folio
ocfs2: Convert to release_folio
nilfs2: Remove comment about releasepage
nfs: Convert to release_folio
jfs: Convert to release_folio
...
- Fix a couple of accounting errors in the buffered io code.
- Discontinue the practice of marking folios !uptodate and invalidating
them when writeback fails. This fixes some UAF bugs when multipage
folios are enabled, and brings the behavior of XFS/gfs/zonefs into
alignment with the behavior of all the other Linux filesystems.
-----BEGIN PGP SIGNATURE-----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=lnqq
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.19-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"There's a couple of corrections sent in by Andreas for some accounting
errors.
The biggest change this time around is that writeback errors longer
clear pageuptodate nor does XFS invalidate the page cache anymore.
This brings XFS (and gfs2/zonefs) behavior in line with every other
Linux filesystem driver, and fixes some UAF bugs that only cropped up
after willy turned on multipage folios for XFS in 5.18-rc1.
Regrettably, it took all the way to the end of the 5.18 cycle to find
the source of these bugs and reach a consensus that XFS' writeback
failure behavior from 20 years ago is no longer necessary.
Summary:
- Fix a couple of accounting errors in the buffered io code.
- Discontinue the practice of marking folios !uptodate and
invalidating them when writeback fails.
This fixes some UAF bugs when multipage folios are enabled, and
brings the behavior of XFS/gfs/zonefs into alignment with the
behavior of all the other Linux filesystems"
* tag 'iomap-5.19-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: don't invalidate folios after writeback errors
iomap: iomap_write_end cleanup
iomap: iomap_write_failed fix
-----BEGIN PGP SIGNATURE-----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=lv6P
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features:
- subpage:
- support for PAGE_SIZE > 4K (previously only 64K)
- make it work with raid56
- repair super block num_devices automatically if it does not match
the number of device items
- defrag can convert inline extents to regular extents, up to now
inline files were skipped but the setting of mount option
max_inline could affect the decision logic
- zoned:
- minimal accepted zone size is explicitly set to 4MiB
- make zone reclaim less aggressive and don't reclaim if there are
enough free zones
- add per-profile sysfs tunable of the reclaim threshold
- allow automatic block group reclaim for non-zoned filesystems, with
sysfs tunables
- tree-checker: new check, compare extent buffer owner against owner
rootid
Performance:
- avoid blocking on space reservation when doing nowait direct io
writes (+7% throughput for reads and writes)
- NOCOW write throughput improvement due to refined locking (+3%)
- send: reduce pressure to page cache by dropping extent pages right
after they're processed
Core:
- convert all radix trees to xarray
- add iterators for b-tree node items
- support printk message index
- user bulk page allocation for extent buffers
- switch to bio_alloc API, use on-stack bios where convenient, other
bio cleanups
- use rw lock for block groups to favor concurrent reads
- simplify workques, don't allocate high priority threads for all
normal queues as we need only one
- refactor scrub, process chunks based on their constraints and
similarity
- allocate direct io structures on stack and pass around only
pointers, avoids allocation and reduces potential error handling
Fixes:
- fix count of reserved transaction items for various inode
operations
- fix deadlock between concurrent dio writes when low on free data
space
- fix a few cases when zones need to be finished
VFS, iomap:
- add helper to check if sb write has started (usable for assertions)
- new helper iomap_dio_alloc_bio, export iomap_dio_bio_end_io"
* tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (173 commits)
btrfs: zoned: introduce a minimal zone size 4M and reject mount
btrfs: allow defrag to convert inline extents to regular extents
btrfs: add "0x" prefix for unsupported optional features
btrfs: do not account twice for inode ref when reserving metadata units
btrfs: zoned: fix comparison of alloc_offset vs meta_write_pointer
btrfs: send: avoid trashing the page cache
btrfs: send: keep the current inode open while processing it
btrfs: allocate the btrfs_dio_private as part of the iomap dio bio
btrfs: move struct btrfs_dio_private to inode.c
btrfs: remove the disk_bytenr in struct btrfs_dio_private
btrfs: allocate dio_data on stack
iomap: add per-iomap_iter private data
iomap: allow the file system to provide a bio_set for direct I/O
btrfs: add a btrfs_dio_rw wrapper
btrfs: zoned: zone finish unused block group
btrfs: zoned: properly finish block group on metadata write
btrfs: zoned: finish block group when there are no more allocatable bytes left
btrfs: zoned: consolidate zone finish functions
btrfs: zoned: introduce btrfs_zoned_bg_is_full
btrfs: improve error reporting in lookup_inline_extent_backref
...
-----BEGIN PGP SIGNATURE-----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=0Rw1
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
While running xfs/297 and generic/642, I noticed a crash in
xfs_attri_item_relog when it tries to copy the attr name to the new
xattri log item. I think what happened here was that we called
->iop_commit on the old attri item (which nulls out the pointers) as
part of a log force at the same time that a chained attr operation was
ongoing. The system was busy enough that at some later point, the defer
ops operation decided it was necessary to relog the attri log item, but
as we've detached the name buffer from the old attri log item, we can't
copy it to the new one, and kaboom.
I think there's a broader refcounting problem with LARP mode -- the
setxattr code can return to userspace before the CIL actually formats
and commits the log item, which results in a UAF bug. Therefore, the
xattr log item needs to be able to retain a reference to the name and
value buffers until the log items have completely cleared the log.
Furthermore, each time we create an intent log item, we allocate new
memory and (re)copy the contents; sharing here would be very useful.
Solve the UAF and the unnecessary memory allocations by having the log
code create a single refcounted buffer to contain the name and value
contents. This buffer can be passed from old to new during a relog
operation, and the logging code can (optionally) attach it to the
xfs_attr_item for reuse when LARP mode is enabled.
This also fixes a problem where the xfs_attri_log_item objects weren't
being freed back to the same cache where they came from.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
V4 superblocks do not contain the log_incompat feature bit, which means
that we cannot protect xattr log items against kernels that are too old
to know how to recover them. Turn off the log items for such
filesystems and adjust the "delayed" name to reflect what it's really
controlling.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Clean up the following includecheck warning:
./fs/xfs/xfs_attr_item.c: xfs_inode.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Retry unaligned DIO with exclusive blocking semantics only when the
IOCB_NOWAIT flag is not set. If we are doing nonblocking user I/O,
propagate the error directly.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Remove tht entire xlog_recover_check_summary() function, this entire
function is dead code and has been for 12 years.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Everywhere else in XFS, structures that capture the state of an ongoing
deferred work item all have names that end with "_intent". The new
extended attribute deferred work items are not named as such, so fix it
to follow the naming convention used elsewhere.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The state variable is now a local variable pointing to a heap
allocation, so we don't need to zero-initialize it, nor do we need the
conditional to decide if we should free it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Initialize and destroy the xattr log item caches in the same places that
we do all the other log item caches.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Nobody uses this field, so get rid of it and the unused flag definition.
Rearrange the structure layout to reduce its size from 104 to 96 bytes.
This gets us from 39 to 42 objects per page.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Create a separate slab cache for struct xfs_attr_item objects, since we
can pack the (104-byte) intent items more tightly than we can with the
general slab cache objects. On x86, this means 39 intents per memory
page instead of 32.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The flags that are stored in the extended attr intent log item really
should have a separate namespace from the rest of the XFS_ATTR_* flags.
Give them one to make it a little more obvious that they're intent item
flags.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The calling conventions of this function are a mess -- callers /can/
provide a pointer to a pointer to a state structure, but it's not
required, and as evidenced by the last two patches, the callers that do
weren't be careful enough about how to deal with an existing da state.
Push the allocation and freeing responsibilty to the callers, which
means that callers from the xattr node state machine steps now have the
visibility to allocate or free the da state structure as they please.
As a bonus, the node remove/add paths for larp-mode replaces can reset
the da state structure instead of freeing and immediately reallocating
it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Technically speaking, objects allocated out of a specific slab cache are
supposed to be freed to that slab cache. The popular slab backends will
take care of this for us, but SLOB famously doesn't. Fix this, even if
slob + xfs are not that common of a combination.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we're validating a recovered xattr log item during log recovery, we
should check the name before starting to allocate resources. This isn't
strictly necessary on its own, but it means that we won't bother with
huge memory allocations during recovery if the attr name is garbage,
which will simplify the changes in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Make sure we screen the "attr flags" field of recovered xattr intent log
items to reject flag bits that we don't know about. This is really the
attr *filter* field from xfs_da_args, so rename the field and create
a mask to make checking for invalid bits easier.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Make sure we screen the op flags field of recovered xattr intent log
items to reject flag bits that we don't know about.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If a setxattr operation finds an xattr structure in leaf format, adding
the attr can fail due to lack of space and hence requires an upgrade to
node format. After this happens, we'll roll the transaction and
re-enter the state machine, at which time we need to perform a second
lookup of the attribute name to find its new location. This lookup
attaches a new da state structure to the xfs_attr_item but doesn't free
the old one (from the leaf lookup) and leaks it. Fix that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
kmemleak reported that we lost an xfs_da_state while removing xattrs in
generic/020:
unreferenced object 0xffff88801c0e4b40 (size 480):
comm "attr", pid 30515, jiffies 4294931061 (age 5.960s)
hex dump (first 32 bytes):
78 bc 65 07 00 c9 ff ff 00 30 60 1c 80 88 ff ff x.e......0`.....
02 00 00 00 00 00 00 00 80 18 83 4e 80 88 ff ff ...........N....
backtrace:
[<ffffffffa023ef4a>] xfs_da_state_alloc+0x1a/0x30 [xfs]
[<ffffffffa021b6f3>] xfs_attr_node_hasname+0x23/0x90 [xfs]
[<ffffffffa021c6f1>] xfs_attr_set_iter+0x441/0xa30 [xfs]
[<ffffffffa02b5104>] xfs_xattri_finish_update+0x44/0x80 [xfs]
[<ffffffffa02b515e>] xfs_attr_finish_item+0x1e/0x40 [xfs]
[<ffffffffa0244744>] xfs_defer_finish_noroll+0x184/0x740 [xfs]
[<ffffffffa02a6473>] __xfs_trans_commit+0x153/0x3e0 [xfs]
[<ffffffffa021d149>] xfs_attr_set+0x469/0x7e0 [xfs]
[<ffffffffa02a78d9>] xfs_xattr_set+0x89/0xd0 [xfs]
[<ffffffff812e6512>] __vfs_removexattr+0x52/0x70
[<ffffffff812e6a08>] __vfs_removexattr_locked+0xb8/0x150
[<ffffffff812e6af6>] vfs_removexattr+0x56/0x100
[<ffffffff812e6bf8>] removexattr+0x58/0x90
[<ffffffff812e6cce>] path_removexattr+0x9e/0xc0
[<ffffffff812e6d44>] __x64_sys_lremovexattr+0x14/0x20
[<ffffffff81786b35>] do_syscall_64+0x35/0x80
I think this is a consequence of xfs_attr_node_removename_setup
attaching a new da(btree) state to xfs_attr_item and never freeing it.
I /think/ it's the case that the remove paths could detach the da state
earlier in the remove state machine since nothing else accesses the
state. However, let's future-proof the new xattr code by adding a
catch-all when we free the xfs_attr_item to make sure we never leak the
da state.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS has the unique behavior (as compared to the other Linux filesystems)
that on writeback errors it will completely invalidate the affected
folio and force the page cache to reread the contents from disk. All
other filesystems leave the page mapped and up to date.
This is a rude awakening for user programs, since (in the case where
write fails but reread doesn't) file contents will appear to revert to
old disk contents with no notification other than an EIO on fsync. This
might have been annoying back in the days when iomap dealt with one page
at a time, but with multipage folios, we can now throw away *megabytes*
worth of data for a single write error.
On *most* Linux filesystems, a program can respond to an EIO on write by
redirtying the entire file and scheduling it for writeback. This isn't
foolproof, since the page that failed writeback is no longer dirty and
could be evicted, but programs that want to recover properly *also*
have to detect XFS and regenerate every write they've made to the file.
When running xfs/314 on arm64, I noticed a UAF when xfs_discard_folio
invalidates multipage folios that could be undergoing writeback. If,
say, we have a 256K folio caching a mix of written and unwritten
extents, it's possible that we could start writeback of the first (say)
64K of the folio and then hit a writeback error on the next 64K. We
then free the iop attached to the folio, which is really bad because
writeback completion on the first 64k will trip over the "blocks per
folio > 1 && !iop" assertion.
This can't be fixed by only invalidating the folio if writeback fails at
the start of the folio, since the folio is marked !uptodate, which trips
other assertions elsewhere. Get rid of the whole behavior entirely.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Allow the file system to keep state for all iterations. For now only
wire it up for direct I/O as there is an immediate need for it there.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Because heap allocation of 64kB buffers will fail:
....
XFS: fs_mark(8414) possible memory allocation deadlock size 65768 in kmem_alloc (mode:0x2d40)
XFS: fs_mark(8417) possible memory allocation deadlock size 65768 in kmem_alloc (mode:0x2d40)
XFS: fs_mark(8409) possible memory allocation deadlock size 65768 in kmem_alloc (mode:0x2d40)
XFS: fs_mark(8428) possible memory allocation deadlock size 65768 in kmem_alloc (mode:0x2d40)
XFS: fs_mark(8430) possible memory allocation deadlock size 65768 in kmem_alloc (mode:0x2d40)
XFS: fs_mark(8437) possible memory allocation deadlock size 65768 in kmem_alloc (mode:0x2d40)
XFS: fs_mark(8433) possible memory allocation deadlock size 65768 in kmem_alloc (mode:0x2d40)
XFS: fs_mark(8406) possible memory allocation deadlock size 65768 in kmem_alloc (mode:0x2d40)
XFS: fs_mark(8412) possible memory allocation deadlock size 65768 in kmem_alloc (mode:0x2d40)
XFS: fs_mark(8432) possible memory allocation deadlock size 65768 in kmem_alloc (mode:0x2d40)
XFS: fs_mark(8424) possible memory allocation deadlock size 65768 in kmem_alloc (mode:0x2d40)
....
I'd use kvmalloc() instead, but....
- 48.19% xfs_attr_create_intent
- 46.89% xfs_attri_init
- kvmalloc_node
- 46.04% __kmalloc_node
- kmalloc_large_node
- 45.99% __alloc_pages
- 39.39% __alloc_pages_slowpath.constprop.0
- 38.89% __alloc_pages_direct_compact
- 38.71% try_to_compact_pages
- compact_zone_order
- compact_zone
- 21.09% isolate_migratepages_block
10.31% PageHuge
5.82% set_pfnblock_flags_mask
0.86% get_pfnblock_flags_mask
- 4.48% __reset_isolation_suitable
4.44% __reset_isolation_pfn
- 3.56% __pageblock_pfn_to_page
1.33% pfn_to_online_page
2.83% get_pfnblock_flags_mask
- 0.87% migrate_pages
0.86% compaction_alloc
0.84% find_suitable_fallback
- 6.60% get_page_from_freelist
4.99% clear_page_erms
- 1.19% _raw_spin_lock_irqsave
- do_raw_spin_lock
__pv_queued_spin_lock_slowpath
- 0.86% __vmalloc_node_range
0.65% __alloc_pages_bulk
.... this is just yet another reminder of how much kvmalloc() sucks.
So lift xlog_cil_kvmalloc(), rename it to xlog_kvmalloc() and use
that instead....
We also clean up the attribute name and value lengths as they no
longer need to be rounded out to sizes compatible with log vectors.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_repair flags these as a corruption error, so the verifier should
catch software bugs that result in empty leaf blocks being written
to disk, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We can't use the same algorithm for replacing an existing attribute
when logging attributes. The existing algorithm is essentially:
1. create new attr w/ INCOMPLETE
2. atomically flip INCOMPLETE flags between old + new attribute
3. remove old attr which is marked w/ INCOMPLETE
This algorithm guarantees that we see either the old or new
attribute, and if we fail after the atomic flag flip, we don't have
to recover the removal of the old attr because we never see
INCOMPLETE attributes in lookups.
For logged attributes, however, this does not work. The logged
attribute intents do not track the work that has been done as the
transaction rolls, and hence the only recovery mechanism we have is
"run the replace operation from scratch".
This is further exacerbated by the attempt to avoid needing the
INCOMPLETE flag to create an atomic swap. This means we can create
a second active attribute of the same name before we remove the
original. If we fail at any point after the create but before the
removal has completed, we end up with duplicate attributes in
the attr btree and recovery only tries to replace one of them.
There are several other failure modes where we can leave partially
allocated remote attributes that expose stale data, partially free
remote attributes that enable UAF based stale data exposure, etc.
TO fix this, we need a different algorithm for replace operations
when LARP is enabled. Luckily, it's not that complex if we take the
right first step. That is, the first thing we log is the attri
intent with the new name/value pair and mark the old attr as
INCOMPLETE in the same transaction.
From there, we then remove the old attr and keep relogging the
new name/value in the intent, such that we always know that we have
to create the new attr in recovery. Once the old attr is removed,
we then run a normal ATTR_CREATE operation relogging the intent as
we go. If the new attr is local, then it gets created in a single
atomic transaction that also logs the final intent done. If the new
attr is remote, the we set INCOMPLETE on the new attr while we
allocate and set the remote value, and then we clear the INCOMPLETE
flag at in the last transaction taht logs the final intent done.
If we fail at any point in this algorithm, log recovery will always
see the same state on disk: the new name/value in the intent, and
either an INCOMPLETE attr or no attr in the attr btree. If we find
an INCOMPLETE attr, we run the full replace starting with removing
the INCOMPLETE attr. If we don't find it, then we simply create the
new attr.
Notably, recovery of a failed create that has an INCOMPLETE flag set
is now the same - we start with the lookup of the INCOMPLETE attr,
and if that exists then we do the full replace recovery process,
otherwise we just create the new attr.
Hence changing the way we do the replace operation when LARP is
enabled allows us to use the same log recovery algorithm for both
the ATTR_CREATE and ATTR_REPLACE operations. This is also the same
algorithm we use for runtime ATTR_REPLACE operations (except for the
step setting up the initial conditions).
The result is that:
- ATTR_CREATE uses the same algorithm regardless of whether LARP is
enabled or not
- ATTR_REPLACE with larp=0 is identical to the old algorithm
- ATTR_REPLACE with larp=1 runs an unmodified attr removal algorithm
from the larp=0 code and then runs the unmodified ATTR_CREATE
code.
- log recovery when larp=1 runs the same ATTR_REPLACE algorithm as
it uses at runtime.
Because the state machine is now quite clean, changing the algorithm
is really just a case of changing the initial state and how the
states link together for the ATTR_REPLACE case. Hence it's not a
huge amount of code for what is a fairly substantial rework
of the attr logging and recovery algorithm....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We currently store the high level attr operation in
args->attr_flags. This field contains what the VFS is telling us to
do, but don't necessarily match what we are doing in the low level
modification state machine. e.g. XATTR_REPLACE implies both
XFS_DA_OP_ADDNAME and XFS_DA_OP_RENAME because it is doing both a
remove and adding a new attr.
However, deep in the individual state machine operations, we check
errors against this high level VFS op flags, not the low level
XFS_DA_OP flags. Indeed, we don't even have a low level flag for
a REMOVE operation, so the only way we know we are doing a remove
is the complete absence of XATTR_REPLACE, XATTR_CREATE,
XFS_DA_OP_ADDNAME and XFS_DA_OP_RENAME. And because there are other
flags in these fields, this is a pain to check if we need to.
As the XFS_DA_OP flags are only needed once the deferred operations
are set up, set these flags appropriately when we set the initial
operation state. We also introduce a XFS_DA_OP_REMOVE flag to make
it easy to know that we are doing a remove operation.
With these, we can remove the use of XATTR_REPLACE and XATTR_CREATE
in low level lookup operations, and manipulate the low level flags
according to the low level context that is operating. e.g. log
recovery does not have a VFS xattr operation state to copy into
args->attr_flags, and the low level state machine ops we do for
recovery do not match the high level VFS operations that were in
progress when the system failed...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_attri_remove_iter is not used anymore, so remove it and all the
infrastructure it uses and is needed to drive it. THe
xfs_attr_refillstate() function now throws an unused warning, so
isolate the xfs_attr_fillstate()/xfs_attr_refillstate() code pair
with an #if 0 and a comment explaining why we want to keep this code
and restore the optimisation it provides in the near future.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now that xfs_attri_set_iter() has initial states for removing
attributes, switch the pure attribute removal code over to using it.
This requires attrs being removed to always be marked as INCOMPLETE
before we start the removal due to the fact we look up the attr to
remove again in xfs_attr_node_remove_attr().
Note: this drops the fillstate/refillstate optimisations from
the remove path that avoid having to look up the path again after
setting the incomplete flag and removing remote attrs. Restoring
that optimisation to this path is future Dave's problem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We need to merge the add and remove code paths to enable safe
recovery of replace operations. Hoist the initial remove states from
xfs_attr_remove_iter into xfs_attr_set_iter. We will make use of
them in the next patches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now that the full xfs_attr_set_iter() state machine always
terminates with either the state being XFS_DAS_DONE on success or
an error on failure, we can get rid of the need for it to return
-EAGAIN whenever it needs to roll the transaction before running
the next state.
That is, we don't need to spray -EAGAIN return states everywhere,
the caller just check the state machine state for completion to
determine what action should be taken next. This greatly simplifies
the code within the state machine implementation as it now only has
to handle 0 for success or -errno for error and it doesn't need to
tell the caller to retry.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Clean up the final leaf/node states in xfs_attr_set_iter() to
further simplify the high level state machine and to set the
completion state correctly. As we are adding a separate state
for node format removal, we need to ensure that node formats
are collapsed back to shortform or empty correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We may not have a remote value for the old xattr we have to remove,
so skip over the remote value removal states and go straight to
the xattr name removal in the leaf/node block.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We can skip the REPLACE state when LARP is enabled, but that means
the XFS_DAS_FLIP_LFLAG state is now poorly named - it indicates
something that has been done rather than what the state is going to
do. Rename it to "REMOVE_OLD" to indicate that we are now going to
perform removal of the old attr.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we set a new xattr, we have three exit paths:
1. nothing else to do
2. allocate and set the remote xattr value
3. perform the rest of a replace operation
Currently we push both 2 and 3 into the same state, regardless of
whether we just set a remote attribute or not. Once we've set the
remote xattr, we have two exit states:
1. nothing else to do
2. perform the rest of a replace operation
Hence we can split the remote xattr allocation and setting into
their own states and factor it out of xfs_attr_set_iter() to further
clean up the state machine and the implementation of the state
machine.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The operations performed from XFS_DAS_FOUND_LBLK through to
XFS_DAS_RM_LBLK are now identical to XFS_DAS_FOUND_NBLK through to
XFS_DAS_RM_NBLK. We can collapse these down into a single set of
code.
To do this, define the states that leaf and node run through as
separate sets of sequential states. Then as we move to the next
state, we can use increments rather than specific state assignments
to move through the states. This means the state progression is set
by the initial state that enters the series and we don't need to
duplicate the code anymore.
At the exit point of the series we need to select the correct leaf
or node state, but that can also be done by state increment rather
than assignment.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We re-enter the XFS_DAS_FOUND_LBLK state when we have to allocate
multiple extents for a remote xattr. We currently have a flag
called XFS_DAC_LEAF_ADDNAME_INIT to avoid running the remote attr
hole finding code more than once.
However, for the node format tree, we have a separate state for this
so we never reenter the state machine at XFS_DAS_FOUND_NBLK and so
it does not need a special flag to skip over the remote attr hold
finding code.
Convert the leaf block code to use the same state machine as the
node blocks and kill the XFS_DAC_LEAF_ADDNAME_INIT flag.
This further points out that this "ALLOC" state is only traversed
if we have remote xattrs or we are doing a rename operation. Rename
both the leaf and node alloc states to _ALLOC_RMT to indicate they
are iterating to do allocation of remote xattr blocks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We current use XFS_DAS_UNINIT for several steps in the attr_set
state machine. We use it for setting shortform xattrs, converting
from shortform to leaf, leaf add, leaf-to-node and leaf add. All of
these things are essentially known before we start the state machine
iterating, so we really should separate them out:
XFS_DAS_SF_ADD:
- tries to do a shortform add
- on success -> done
- on ENOSPC converts to leaf, -> XFS_DAS_LEAF_ADD
- on error, dies.
XFS_DAS_LEAF_ADD:
- tries to do leaf add
- on success:
- inline attr -> done
- remote xattr || REPLACE -> XFS_DAS_FOUND_LBLK
- on ENOSPC converts to node, -> XFS_DAS_NODE_ADD
- on error, dies
XFS_DAS_NODE_ADD:
- tries to do node add
- on success:
- inline attr -> done
- remote xattr || REPLACE -> XFS_DAS_FOUND_NBLK
- on error, dies
This makes it easier to understand how the state machine starts
up and sets us up on the path to further state machine
simplifications.
This also converts the DAS state tracepoints to use strings rather
than numbers, as converting between enums and numbers requires
manual counting rather than just reading the name.
This also introduces a XFS_DAS_DONE state so that we can trace
successful operation completions easily.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Having just dropped support for quota warning limits and warning
counters, the warning fields no longer have any meaning. Prevent these
fields from being set by removing QC_WARNS_MASK from XFS_QC_SETINFO_MASK
and XFS_QC_MASK.
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Warning counts are not used anywhere in the kernel. In addition, there
are no use cases, test coverage, or documentation for this functionality.
Remove the 'warnings' field from struct xfs_dquot_res and any other
related code.
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Warning limits in xfs quota is an unused feature that is currently
documented as unimplemented, and it is unclear what the intended
behavior of these limits are. Remove the ‘warn’ field from struct
xfs_quota_limits and any other related code.
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Logged attribute intents only have set and remove types - there is
no separate intent type for a replace operation. We should have a
separate type for a replace operation, as it needs to perform
operations that neither SET or REMOVE can perform.
Add this type to the intent items and rearrange the deferred
operation setup to reflect the different operations we are
performing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We currently set it and hold it when converting from short to leaf
form, then release it only to immediately look it back up again
to do the leaf insert.
Do a bit of refactoring to xfs_attr_leaf_try_add() to avoid this
messy handling of the newly allocated leaf buffer.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On the first allocation of a attrd item, xfs_trans_add_item() fires
an assert like so:
XFS (pmem0): EXPERIMENTAL logged extended attributes feature added. Use at your own risk!
XFS: Assertion failed: !test_bit(XFS_LI_DIRTY, &lip->li_flags), file: fs/xfs/xfs_trans.c, line: 683
------------[ cut here ]------------
kernel BUG at fs/xfs/xfs_message.c:102!
Call Trace:
<TASK>
xfs_trans_add_item+0x17e/0x190
xfs_trans_get_attrd+0x67/0x90
xfs_attr_create_done+0x13/0x20
xfs_defer_finish_noroll+0x100/0x690
__xfs_trans_commit+0x144/0x330
xfs_trans_commit+0x10/0x20
xfs_attr_set+0x3e2/0x4c0
xfs_initxattrs+0xaa/0xe0
security_inode_init_security+0xb0/0x130
xfs_init_security+0x18/0x20
xfs_generic_create+0x13a/0x340
xfs_vn_create+0x17/0x20
path_openat+0xff3/0x12f0
do_filp_open+0xb2/0x150
The attrd log item is allocated via kmem_cache_alloc, and
xfs_log_item_init() does not zero the entire log item structure - it
assumes that the structure is already all zeros as it only
initialises non-zero fields. Fix the attr items to be allocated
via the *zalloc methods.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
generic/642 triggered a reproducable assert failure in
xlog_cil_commit() that resulted from a xfs_attr_set() committing
an empty but dirty transaction. When the CIL is empty and this
occurs, xlog_cil_commit() tries a background push and this triggers
a "pushing an empty CIL" assert.
XFS: Assertion failed: !list_empty(&cil->xc_cil), file: fs/xfs/xfs_log_cil.c, line: 1274
Call Trace:
<TASK>
xlog_cil_commit+0xa5a/0xad0
__xfs_trans_commit+0xb8/0x330
xfs_trans_commit+0x10/0x20
xfs_attr_set+0x3e2/0x4c0
xfs_xattr_set+0x8d/0xe0
__vfs_setxattr+0x6b/0x90
__vfs_setxattr_noperm+0x76/0x220
__vfs_setxattr_locked+0xdf/0x100
vfs_setxattr+0x94/0x170
setxattr+0x110/0x200
path_setxattr+0xbf/0xe0
__x64_sys_setxattr+0x2b/0x30
do_syscall_64+0x35/0x80
The problem is related to the breakdown of attribute addition in
xfs_attr_set_iter() and how it is called from deferred operations.
When we have a pure leaf xattr insert, we add the xattr to the leaf
and set the next state to XFS_DAS_FOUND_LBLK and return -EAGAIN.
This requeues the xattr defered work, rolls the transaction and
runs xfs_attr_set_iter() again. This then checks the xattr for
being remote (it's not) and whether a replace op is being done (this
is a create op) and if neither are true it returns without having
done anything.
xfs_xattri_finish_update() then unconditionally sets the transaction
dirty, and the deferops finishes and returns to __xfs_trans_commit()
which sees the transaction dirty and tries to commit it by calling
xlog_cil_commit(). The transaction is empty, and then the assert
fires if this happens when the CIL is empty.
This patch addresses the structure of xfs_attr_set_iter() that
requires re-entry on leaf add even when nothing will be done. This
gets rid of the trailing empty transaction and so doesn't trigger
the XFS_TRANS_DIRTY assignment in xfs_xattri_finish_update()
incorrectly. Addressing that is for a different patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add an error tag on xfs_attr3_leaf_to_node to test log attribute
recovery and replay.
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add an error tag on xfs_da3_split to test log attribute recovery
and replay.
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Quick helper function to collapse duplicate code to initialize
transactions for attributes
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch adds a helper function xfs_attr_leaf_addname. While this
does help to break down xfs_attr_set_iter, it does also hoist out some
of the state management. This patch has been moved to the end of the
clean up series for further discussion.
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This is a clean up patch that merges xfs_delattr_context into
xfs_attr_item. Now that the refactoring is complete and the delayed
operation infrastructure is in place, we can combine these to eliminate
the extra struct
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch adds a debug option to enable log attribute replay. Eventually
this can be removed when delayed attrs becomes permanent.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch adds an error tag that we can use to test log attribute
recovery and replay
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Remove xfs_attr_set_args, xfs_attr_remove_args, and xfs_attr_trans_roll.
These high level loops are now driven by the delayed operations code,
and can be removed.
Additionally collapse in the leaf_bp parameter of xfs_attr_set_iter
since we only have one caller that passes dac->leaf_bp
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
These routines set up and queue a new deferred attribute operations.
These functions are meant to be called by any routine needing to
initiate a deferred attribute operation as opposed to the existing
inline operations. New helper function xfs_attr_item_init also added.
Finally enable delayed attributes in xfs_attr_set and xfs_attr_remove.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Change all the filesystems which used iomap_releasepage to use the
new function.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
This is a clean up patch that skips the flip flag logic for delayed attr
renames. Since the log replay keeps the inode locked, we do not need to
worry about race windows with attr lookups. So we can skip over
flipping the flag and the extra transaction roll for it
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch adds the needed routines to create, log and recover logged
extended attribute intents.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently attributes are modified directly across one or more
transactions. But they are not logged or replayed in the event of an
error. The goal of log attr replay is to enable logging and replaying
of attribute operations using the existing delayed operations
infrastructure. This will later enable the attributes to become part of
larger multi part operations that also must first be recorded to the
log. This is mostly of interest in the scheme of parent pointers which
would need to maintain an attribute containing parent inode information
any time an inode is moved, created, or removed. Parent pointers would
then be of interest to any feature that would need to quickly derive an
inode path from the mount point. Online scrub, nfs lookups and fs grow
or shrink operations are all features that could take advantage of this.
This patch adds two new log item types for setting or removing
attributes as deferred operations. The xfs_attri_log_item will log an
intent to set or remove an attribute. The corresponding
xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is
freed once the transaction is done. Both log items use a generic
xfs_attr_log_format structure that contains the attribute name, value,
flags, inode, and an op_flag that indicates if the operations is a set
or remove.
[dchinner: added extra little bits needed for intent whiteouts]
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
During an attr rename operation, blocks are saved for later removal
as rmtblkno2. The rmtblkno is used in the case of needing to alloc
more blocks if not enough were available. However, in the case
that no further blocks need to be added or removed, we can return as soon
as xfs_attr_node_addname completes, rather than rolling the transaction
with an -EAGAIN return. This extra loop does not hurt anything right
now, but it will be a problem later when we get into log items because
we end up with an empty log transaction. So, add a simple check to
cut out the unneeded iteration.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The new deferred attr patch set uncovered a double unlock in the
recent port of the defer ops capture and continue code. During log
recovery, we're allowed to hold buffers to a transaction that's being
used to replay an intent item. When we capture the resources as part
of scheduling a continuation of an intent chain, we call xfs_buf_hold
to retain our reference to the buffer beyond the transaction commit,
but we do /not/ call xfs_trans_bhold to maintain the buffer lock.
This means that xfs_defer_ops_continue needs to relock the buffers
before xfs_defer_restore_resources joins then tothe new transaction.
Additionally, the buffers should not be passed back via the dres
structure since they need to remain locked unlike the inodes. So
simply set dr_bufs to zero after populating the dres structure.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
As Dave Chinner has complained about on IRC, there are a couple of
things about reflink that are very inefficient. First of all, we
limited the size of all bunmapi operations to avoid flooding the log
with defer ops in the worst case, but recent changes to the defer ops
code have solved that problem, so get rid of the bunmapi length clamp.
Second, the log reservations for reflink operations are far far larger
than they need to be. Shrink them to exactly what we need to handle
each deferred RUI and CUI log item, and no more. Also reduce logcount
because we don't need 8 rolls per operation. Introduce a transaction
reservation compatibility layer to avoid changing the minimum log size
calculations.
v2: better document the use of EFIs to track when refcount updates
should be continued in a new transaction, disentangle the alternate
log space reservation code
-----BEGIN PGP SIGNATURE-----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=KU+/
-----END PGP SIGNATURE-----
Merge tag 'reflink-speedups-5.19_2022-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.19-for-next
xfs: fix reflink inefficiencies
As Dave Chinner has complained about on IRC, there are a couple of
things about reflink that are very inefficient. First of all, we
limited the size of all bunmapi operations to avoid flooding the log
with defer ops in the worst case, but recent changes to the defer
ops code have solved that problem, so get rid of the bunmapi length
clamp.
Second, the log reservations for reflink operations are far far
larger than they need to be. Shrink them to exactly what we need to
handle each deferred RUI and CUI log item, and no more. Also reduce
logcount because we don't need 8 rolls per operation. Introduce a
transaction reservation compatibility layer to avoid changing the
minimum log size calculations.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reduce the performance impact of the reverse mapping btree when reflink
is enabled by using the much faster non-overlapped btree lookup
functions when we're searching the rmap index with a fully specified
key. If we find the exact record we're looking for, great! We don't
have to perform the full overlapped scan. For filesystems with high
sharing factors this reduces the xfs_scrub runtime by a good 15%%.
This has been shown to reduce the fstests runtime for realtime rmap
configurations by 30%%, since the lack of AGs severely limits
scalability.
v2: simplify the non-overlapped lookup code per dave comments
-----BEGIN PGP SIGNATURE-----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=73GF
-----END PGP SIGNATURE-----
Merge tag 'rmap-speedups-5.19_2022-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.19-for-next
xfs: fix rmap inefficiencies
Reduce the performance impact of the reverse mapping btree when
reflink is enabled by using the much faster non-overlapped btree
lookup functions when we're searching the rmap index with a fully
specified key. If we find the exact record we're looking for,
great! We don't have to perform the full overlapped scan. For
filesystems with high sharing factors this reduces the xfs_scrub
runtime by a good 15%%.
This has been shown to reduce the fstests runtime for realtime rmap
configurations by 30%%, since the lack of AGs severely limits
scalability.
Signed-off-by: Dave Chinner <david@fromorbit.com>
We don't check that the v4 feature flags taht v5 requires to be set
are actually set anywhere. Do this check when we see that the
filesystem is a v5 filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
While xfs_has_nlink() is not used in kernel, it is used in userspace
(e.g. by xfs_db) so we need to set the XFS_FEAT_NLINK flag correctly
in xfs_sb_version_to_features().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_repair catches fork size/format mismatches, but the in-kernel
verifier doesn't, leading to null pointer failures when attempting
to perform operations on the fork. This can occur in the
xfs_dir_is_empty() where the in-memory fork format does not match
the size and so the fork data pointer is accessed incorrectly.
Note: this causes new failures in xfs/348 which is testing mode vs
ftype mismatches. We now detect a regular file that has been changed
to a directory or symlink mode as being corrupt because the data
fork is for a symlink or directory should be in local form when
there are only 3 bytes of data in the data fork. Hence the inode
verify for the regular file now fires w/ -EFSCORRUPTED because
the inode fork format does not match the format the corrupted mode
says it should be in.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To catch the obvious graph cycle problem and hence potential endless
looping.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we log modifications based on intents, we add both intent
and intent done items to the modification being made. These get
written to the log to ensure that the operation is re-run if the
intent done is not found in the log.
However, for operations that complete wholly within a single
checkpoint, the change in the checkpoint is atomic and will never
need replay. In this case, we don't need to actually write the
intent and intent done items to the journal because log recovery
will never need to manually restart this modification.
Log recovery currently handles intent/intent done matching by
inserting the intent into the AIL, then removing it when a matching
intent done item is found. Hence for all the intent-based operations
that complete within a checkpoint, we spend all that time parsing
the intent/intent done items just to cancel them and do nothing with
them.
Hence it follows that the only time we actually need intents in the
log is when the modification crosses checkpoint boundaries in the
log and so may only be partially complete in the journal. Hence if
we commit and intent done item to the CIL and the intent item is in
the same checkpoint, we don't actually have to write them to the
journal because log recovery will always cancel the intents.
We've never really worried about the overhead of logging intents
unnecessarily like this because the intents we log are generally
very much smaller than the change being made. e.g. freeing an extent
involves modifying at lease two freespace btree blocks and the AGF,
so the EFI/EFD overhead is only a small increase in space and
processing time compared to the overall cost of freeing an extent.
However, delayed attributes change this cost equation dramatically,
especially for inline attributes. In the case of adding an inline
attribute, we only log the inode core and attribute fork at present.
With delayed attributes, we now log the attr intent which includes
the name and value, the inode core adn attr fork, and finally the
attr intent done item. We increase the number of items we log from 1
to 3, and the number of log vectors (regions) goes up from 3 to 7.
Hence we tripple the number of objects that the CIL has to process,
and more than double the number of log vectors that need to be
written to the journal.
At scale, this means delayed attributes cause a non-pipelined CIL to
become CPU bound processing all the extra items, resulting in a > 40%
performance degradation on 16-way file+xattr create worklaods.
Pipelining the CIL (as per 5.15) reduces the performance degradation
to 20%, but now the limitation is the rate at which the log items
can be written to the iclogs and iclogs be dispatched for IO and
completed.
Even log IO completion is slowed down by these intents, because it
now has to process 3x the number of items in the checkpoint.
Processing completed intents is especially inefficient here, because
we first insert the intent into the AIL, then remove it from the AIL
when the intent done is processed. IOWs, we are also doing expensive
operations in log IO completion we could completely avoid if we
didn't log completed intent/intent done pairs.
Enter log item whiteouts.
When an intent done is committed, we can check to see if the
associated intent is in the same checkpoint as we are currently
committing the intent done to. If so, we can mark the intent log
item with a whiteout and immediately free the intent done item
rather than committing it to the CIL. We can basically skip the
entire formatting and CIL insertion steps for the intent done item.
However, we cannot remove the intent item from the CIL at this point
because the unlocked per-cpu CIL item lists do not permit removal
without holding the CIL context lock exclusively. Transaction commit
only holds the context lock shared, hence the best we can do is mark
the intent item with a whiteout so that the CIL push can release it
rather than writing it to the log.
This means we never write the intent to the log if the intent done
has also been committed to the same checkpoint, but we'll always
write the intent if the intent done has not been committed or has
been committed to a different checkpoint. This will result in
correct log recovery behaviour in all cases, without the overhead of
logging unnecessary intents.
This intent whiteout concept is generic - we can apply it to all
intent/intent done pairs that have a direct 1:1 relationship. The
way deferred ops iterate and relog intents mean that all intents
currently have a 1:1 relationship with their done intent, and hence
we can apply this cancellation to all existing intent/intent done
implementations.
For delayed attributes with a 16-way 64kB xattr create workload,
whiteouts reduce the amount of journalled metadata from ~2.5GB/s
down to ~600MB/s and improve the creation rate from 9000/s to
14000/s.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we release an intent that a whiteout applies to, it will not
have been committed to the journal and so won't be in the AIL. Hence
when we drop the last reference to the intent, we do not want to try
to remove it from the AIL as that will trigger a filesystem
shutdown. Hence make the removal of intents from the AIL conditional
on them actually being in the AIL so we do the correct thing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To apply a whiteout to an intent item when an intent done item is
committed, we need to be able to retrieve the intent item from the
the intent done item. Add a log item op method for doing this, and
wire all the intent done items up to it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In preparation for adding support for intent item whiteouts.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Intent whiteouts will require extra work to be done during
transaction commit if the transaction contains an intent done item.
To determine if a transaction contains an intent done item, we want
to avoid having to walk all the items in the transaction to check if
they are intent done items. Hence when we add an intent done item to
a transaction, tag the transaction to indicate that it contains such
an item.
We don't tag the transaction when the defer ops is relogging an
intent to move it forward in the log. Whiteouts will never apply to
these cases, so we don't need to bother looking for them.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We currently have a couple of helper functions that try to infer
whether the log item is an intent or intent done item from the
combinations of operations it supports. This is incredibly fragile
and not very efficient as it requires checking specific combinations
of ops.
We need to be able to identify intent and intent done items quickly
and easily in upcoming patches, so simply add intent and intent done
type flags to the log item ops flags. These are static flags to
begin with, so intent items should have been typed like this from
the start.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If the first operation in a string of defer ops has no intents,
then there is no reason to commit it before running the first call
to xfs_defer_finish_one(). This allows the defer ops to be used
effectively for non-intent based operations without requiring an
unnecessary extra transaction commit when first called.
This fixes a regression in per-attribute modification transaction
count when delayed attributes are not being used.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Callers currently have to round out the size of buffers to match the
aligment constraints of log iovecs and xlog_write(). They should not
need to know this detail, so introduce a new function to calculate
the iovec length (for use in ->iop_size implementations). Also
modify xlog_finish_iovec() to round up the length to the correct
alignment so the callers don't need to do this, either.
Convert the only user - inode forks - of this alignment rounding to
use the new interface.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Ever since we added shadown format buffers to the log items, log
items need to handle the item being released with shadow buffers
attached. Due to the fact this requirement was added at the same
time we added new rmap/reflink intents, we missed the cleanup of
those items.
In theory, this means shadow buffers can be leaked in a very small
window when a shutdown is initiated. Testing with KASAN shows this
leak does not happen in practice - we haven't identified a single
leak in several years of shutdown testing since ~v4.8 kernels.
However, the intent whiteout cleanup mechanism results in every
cancelled intent in exactly the same state as this tiny race window
creates and so if intents down clean up shadow buffers on final
release we will leak the shadow buffer for just about every intent
we create.
Hence we start with this patch to close this condition off and
ensure that when whiteouts start to be used we don't leak lots of
memory.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we first allocate or resize an inline inode fork, we round up
the allocation to 4 byte alingment to make journal alignment
constraints. We don't clear the unused bytes, so we can copy up to
three uninitialised bytes into the journal. Zero those bytes so we
only ever copy zeros into the journal.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
These functions return the maximum number of blocks that could be logged
in a particular transaction. "log count" is confusing since there's a
separate concept of a log (operation) count in the reservation code, so
let's change it to "block count" to be less confusing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently, the code that performs CoW remapping after a write has this
odd behavior where it walks /backwards/ through the data fork to remap
extents in reverse order. Earlier, we rewrote the reflink remap
function to use deferred bmap log items instead of trying to cram as
much into the first transaction that we could. Now do the same for the
CoW remap code. There doesn't seem to be any performance impact; we're
just making better use of code that we added for the benefit of reflink.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Before to the introduction of deferred refcount operations, reflink
would try to cram refcount btree updates into the same transaction as an
allocation or a free event. Mainline XFS has never actually done that,
but we never refactored the transaction reservations to reflect that we
now do all refcount updates in separate transactions. Fix this to
reduce the transaction reservation size even farther, so that between
this patch and the previous one, we reduce the tr_write and tr_itruncate
sizes by 66%.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Back in the early days of reflink and rmap development I set the
transaction reservation sizes to be overly generous for rmap+reflink
filesystems, and a little under-generous for rmap-only filesystems.
Since we don't need *eight* transaction rolls to handle three new log
intent items, decrease the logcounts to what we actually need, and amend
the shadow reservation computation function to reflect what we used to
do so that the minimum log size doesn't change.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the tracepoint that computes the size of the transaction used to
compute the minimum log size into xfs_log_get_max_trans_res so that we
only have to compute this stuff once.
Leave xfs_log_get_max_trans_res as a non-static function so that xfs_db
can call it to report the results of the userspace computation of the
same value to diagnose mkfs/kernel misinteractions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Every time someone changes the transaction reservation sizes, they
introduce potential compatibility problems if the changes affect the
minimum log size that we validate at mount time. If the minimum log
size gets larger (which should be avoided because doing so presents a
serious risk of log livelock), filesystems created with old mkfs will
not mount on a newer kernel; if the minimum size shrinks, filesystems
created with newer mkfs will not mount on older kernels.
Therefore, enable the creation of a shadow log reservation structure
where we can "undo" the effects of tweaks when computing minimum log
sizes. These shadow reservations should never be used in practice, but
they insulate us from perturbations in minimum log size.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This raw call isn't necessary since we can always remove a full delalloc
extent.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit e1a4e37cc7, we clamped the length of bunmapi calls on the
data forks of shared files to avoid two failure scenarios: one where the
extent being unmapped is so sparsely shared that we exceed the
transaction reservation with the sheer number of refcount btree updates
and EFI intent items; and the other where we attach so many deferred
updates to the transaction that we pin the log tail and later the log
head meets the tail, causing the log to livelock.
We avoid triggering the first problem by tracking the number of ops in
the refcount btree cursor and forcing a requeue of the refcount intent
item any time we think that we might be close to overflowing. This has
been baked into XFS since before the original e1a4 patch.
A recent patchset fixed the second problem by changing the deferred ops
code to finish all the work items created by each round of trying to
complete a refcount intent item, which eliminates the long chains of
deferred items (27dad); and causing long-running transactions to relog
their intent log items when space in the log gets low (74f4d).
Because this clamp affects /any/ unmapping request regardless of the
sharing factors of the component blocks, it degrades the performance of
all large unmapping requests -- whereas with an unshared file we can
unmap millions of blocks in one go, shared files are limited to
unmapping a few thousand blocks at a time, which causes the upper level
code to spin in a bunmapi loop even if it wasn't needed.
This also eliminates one more place where log recovery behavior can
differ from online behavior, because bunmapi operations no longer need
to requeue. The fstest generic/447 was created to test the old fix, and
it still passes with this applied.
Partial-revert-of: e1a4e37cc7 ("xfs: try to avoid blowing out the transaction reservation when bunmaping a shared extent")
Depends: 27dada070d ("xfs: change the order in which child and parent defer ops ar finished")
Depends: 74f4d6a1e0 ("xfs: only relog deferred intent items if free space in the log gets low")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
A long time ago, I added to XFS the ability to use deferred reference
count operations as part of a transaction chain. This enabled us to
avoid blowing out the transaction reservation when the blocks in a
physical extent all had different reference counts because we could ask
the deferred operation manager for a continuation, which would get us a
clean transaction.
The refcount code asks for a continuation when the number of refcount
record updates reaches the point where we think that the transaction has
logged enough full btree blocks due to refcount (and free space) btree
shape changes and refcount record updates that we're in danger of
overflowing the transaction.
We did not previously count the EFIs logged to the refcount update
transaction because the clamps on the length of a bunmap operation were
sufficient to avoid overflowing the transaction reservation even in the
worst case situation where every other block of the unmapped extent is
shared.
Unfortunately, the restrictions on bunmap length avoid failure in the
worst case by imposing a maximum unmap length of ~3000 blocks, even for
non-pathological cases. This seriously limits performance when freeing
large extents.
Therefore, track EFIs with the same counter as refcount record updates,
and use that information as input into when we should ask for a
continuation. This enables the next patch to drop the clumsy bunmap
limitation.
Depends: 27dada070d ("xfs: change the order in which child and parent defer ops ar finished")
Depends: 74f4d6a1e0 ("xfs: only relog deferred intent items if free space in the log gets low")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reverse mapping on a reflink-capable filesystem has some pretty high
overhead when performing file operations. This is because the rmap
records for logically and physically adjacent extents might not be
adjacent in the rmap index due to data block sharing. As a result, we
use expensive overlapped-interval btree search, which walks every record
that overlaps with the supplied key in the hopes of finding the record.
However, profiling data shows that when the index contains a record that
is an exact match for a query key, the non-overlapped btree search
function can find the record much faster than the overlapped version.
Try the non-overlapped lookup first when we're trying to find the left
neighbor rmap record for a given file mapping, which makes unwritten
extent conversion and remap operations run faster if data block sharing
is minimal in this part of the filesystem.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reverse mapping on a reflink-capable filesystem has some pretty high
overhead when performing file operations. This is because the rmap
records for logically and physically adjacent extents might not be
adjacent in the rmap index due to data block sharing. As a result, we
use expensive overlapped-interval btree search, which walks every record
that overlaps with the supplied key in the hopes of finding the record.
However, profiling data shows that when the index contains a record that
is an exact match for a query key, the non-overlapped btree search
function can find the record much faster than the overlapped version.
Try the non-overlapped lookup first, which will make scrub run much
faster.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Most callers of xfs_rmap_lookup_le will retrieve the btree record
immediately if the lookup succeeds. The overlapped version of this
function (xfs_rmap_lookup_le_range) will return the record if the lookup
succeeds, so make the regular version do it too. Get rid of the useless
len argument, since it's not part of the lookup key.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Record the buffer ops in the xfs_buf tracepoints so that we can monitor
the alleged type of the buffer.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
This reverts commit 4b8628d57b.
XFS quota has had the concept of a "quota warning limit" since
the earliest Irix implementation, but a mechanism for incrementing
the warning counter was never implemented, as documented in the
xfs_quota(8) man page. We do know from the historical archive that
it was never incremented at runtime during quota reservation
operations.
With this commit, the warning counter quickly increments for every
allocation attempt after the user has crossed a quote soft
limit threshold, and this in turn transitions the user to hard
quota failures, rendering soft quota thresholds and timers useless.
This was reported as a regression by users.
Because the intended behavior of this warning counter has never been
understood or documented, and the result of this change is a regression
in soft quota functionality, revert this commit to make soft quota
limits and timers operable again.
Fixes: 4b8628d57b ("xfs: actually bump warning counts when we send warnings)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The filestream AG selection loop uses pagf data to aid in AG
selection, which depends on pagf initialization. If the in-core
structure is not initialized, the caller invokes the AGF read path
to do so and carries on. If another task enters the loop and finds
a pagf init already in progress, the AGF read returns -EAGAIN and
the task continues the loop. This does not increment the current ag
index, however, which means the task spins on the current AGF buffer
until unlocked.
If the AGF read I/O submitted by the initial task happens to be
delayed for whatever reason, this results in soft lockup warnings
via the spinning task. This is reproduced by xfs/170. To avoid this
problem, fix the AGF trylock failure path to properly iterate to the
next AG. If a task iterates all AGs without making progress, the
trylock behavior is dropped in favor of blocking locks and thus a
soft lockup is no longer possible.
Fixes: f48e2df8a8 ("xfs: make xfs_*read_agf return EAGAIN to ALLOC_FLAG_TRYLOCK callers")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Provide a proper stub for the !CONFIG_XFS_POSIX_ACL case.
Also use a easy way for xfs_get_acl stub.
Suggested-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs: Large extent counters
The commit xfs: fix inode fork extent count overflow
(3f8a4f1d87) mentions that 10 billion
data fork extents should be possible to create. However the
corresponding on-disk field has a signed 32-bit type. Hence this
patchset extends the per-inode data fork extent counter to 64 bits
(out of which 48 bits are used to store the extent count).
Also, XFS has an attribute fork extent counter which is 16 bits
wide. A workload that,
1. Creates 1 million 255-byte sized xattrs,
2. Deletes 50% of these xattrs in an alternating manner,
3. Tries to insert 400,000 new 255-byte sized xattrs
causes the xattr extent counter to overflow.
Dave tells me that there are instances where a single file has more
than 100 million hardlinks. With parent pointers being stored in
xattrs, we will overflow the signed 16-bits wide attribute extent
counter when large number of hardlinks are created. Hence this
patchset extends the on-disk field to 32-bits.
The following changes are made to accomplish this,
1. A 64-bit inode field is carved out of existing di_pad and
di_flushiter fields to hold the 64-bit data fork extent counter.
2. The existing 32-bit inode data fork extent counter will be used to
hold the attribute fork extent counter.
3. A new incompat superblock flag to prevent older kernels from mounting
the filesystem.
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
We also pass the fields to log to xfs_btree_offsets() as a uint32_t
all cases now. I have no idea why we made that parameter a int64_t
in the first place, but while we are fixing this up change it to
a uint32_t field, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
This touches xfs_fs.h so affects the user API, but the user API
fields are also unsigned so the flags should really be unsigned,
too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now that we account for log opheaders in the log item formatting
code, we don't actually use the aggregated count of log iovecs in
the CIL for anything. Remove it and the tracking code that
calculates it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
So remove it from the interface and callers.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The rework of xlog_write() no longer requires xlog_get_iclog_state()
to tell it about internal iclog space reservation state to direct it
on what to do. Remove this parameter.
$ size fs/xfs/xfs_log.o.*
text data bss dec hex filename
26520 560 8 27088 69d0 fs/xfs/xfs_log.o.orig
26384 560 8 26952 6948 fs/xfs/xfs_log.o.patched
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Just check that the offset in xlog_write_vec is smaller than the iclog
size and remove the expensive cycling through all iclogs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Re-implement writing of a log vector that does not fit into the
current iclog. The iclog will already be in XLOG_STATE_WANT_SYNC
because xlog_get_iclog_space() will have reserved all the remaining
iclog space for us, hence we can simply iterate over the iovecs in
the log vector getting more iclog space until the entire log vector
is written.
Handling this partial write case separately means we do need to pass
unnecessary state around for the common, fast path case when the log
vector fits entirely within the current iclog. It isolates the
complexity and allows us to modify and improve the partial write
case without impacting the simple fast path.
This change includes several improvements incorporated from patches
written by Christoph Hellwig.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Introduce an optimised version of xlog_write() that is used when the
entire write will fit in a single iclog. This greatly simplifies the
implementation of writing a log vector chain into an iclog, and sets
the ground work for a much more understandable xlog_write()
implementation.
This incorporates some factoring and simplifications proposed by
Christoph Hellwig.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Turn ic_datap from a char into a void pointer given that it points
to arbitrary data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[dgc: also remove (char *) cast in xlog_alloc_log()]
Signed-off-by: Dave Chinner <david@fromorbit.com>
The caller of xlog_write() usually has a close accounting of the
aggregated vector length contained in the log vector chain passed to
xlog_write(). There is no need to iterate the chain to calculate he
length of the data in xlog_write_calculate_len() if the caller is
already iterating that chain to build it.
Passing in the vector length avoids doing an extra chain iteration,
which can be a significant amount of work given that large CIL
commits can have hundreds of thousands of vectors attached to the
chain.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xlog_tic_add_region() is used to trace the regions being added to a
log ticket to provide information in the situation where a ticket
reservation overrun occurs. The information gathered is stored int
the ticket, and dumped if xlog_print_tic_res() is called.
For a front end struct xfs_trans overrun, the ticket only contains
reservation tracking information - the ticket is never handed to the
log so has no regions attached to it. The overrun debug information in this
case comes from xlog_print_trans(), which walks the items attached
to the transaction and dumps their attached formatted log vectors
directly. It also dumps the ticket state, but that only contains
reservation accounting and nothing else. Hence xlog_print_tic_res()
never dumps region or overrun information from this path.
xlog_tic_add_region() is actually called from xlog_write(), which
means it is being used to track the regions seen in a
CIL checkpoint log vector chain. In looking at CIL behaviour
recently, I've seen 32MB checkpoints regularly exceed 250,000
regions in the LV chain. The log ticket debug code can track *15*
regions. IOWs, if there is a ticket overrun in the CIL code, the
ticket region tracking code is going to be completely useless for
determining what went wrong. The only thing it can tell us is how
much of an overrun occurred, and we really don't need extra debug
information in the log ticket to tell us that.
Indeed, the main place we call xlog_tic_add_region() is also adding
up the number of regions and the space used so that xlog_write()
knows how much will be written to the log. This is exactly the same
information that log ticket is storing once we take away the useless
region tracking array. Hence xlog_tic_add_region() is not useful,
but can be called 250,000 times a CIL push...
Just strip all that debug "information" out of the of the log ticket
and only have it report reservation space information when an
overrun occurs. This also reduces the size of a log ticket down by
about 150 bytes...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Current xlog_write() adds op headers to the log manually for every
log item region that is in the vector passed to it. While
xlog_write() needs to stamp the transaction ID into the ophdr, we
already know it's length, flags, clientid, etc at CIL commit time.
This means the only time that xlog write really needs to format and
reserve space for a new ophdr is when a region is split across two
iclogs. Adding the opheader and accounting for it as part of the
normal formatted item region means we simplify the accounting
of space used by a transaction and we don't have to special case
reserving of space in for the ophdrs in xlog_write(). It also means
we can largely initialise the ophdr in transaction commit instead
of xlog_write, making the xlog_write formatting inner loop much
tighter.
xlog_prepare_iovec() is now too large to stay as an inline function,
so we move it out of line and into xfs_log.c.
Object sizes:
text data bss dec hex filename
1125934 305951 484 1432369 15db31 fs/xfs/built-in.a.before
1123360 305951 484 1429795 15d123 fs/xfs/built-in.a.after
So the code is a roughly 2.5kB smaller with xlog_prepare_iovec() now
out of line, even though it grew in size itself.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To include log op headers directly into the log iovec regions that
the ophdrs wrap, we need to move the buffer alignment code from
xlog_finish_iovec() to xlog_prepare_iovec(). This is because the
xlog_op_header is only 12 bytes long, and we need the buffer that
the caller formats their data into to be 8 byte aligned.
Hence once we start prepending the ophdr in xlog_prepare_iovec(), we
are going to need to manage the padding directly to ensure that the
buffer pointer returned is correctly aligned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
