Process FILS discovery and unsolicited broadcast probe response
transmission configurations in ieee80211_change_beacon().
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-6-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Modify the prototype for change_beacon() in struct cfg80211_op to
accept cfg80211_ap_settings instead of cfg80211_beacon_data so that
it can process data in addition to beacons.
Modify the prototypes of ieee80211_change_beacon() and driver specific
functions accordingly.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-4-quic_alokad@quicinc.com
[while at it, remove pointless "if (info)" check in tracing that just
makes all the lines longer than they need be - it's never NULL]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
FILS discovery configuration gets updated only if the maximum interval
is set to a non-zero value, hence there is no way to reset this value
to 0 once set. Replace the check for interval with a new flag which is
set only if the configuration should be updated.
Add similar changes for the unsolicited broadcast probe response handling.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-3-quic_alokad@quicinc.com
[move NULL'ing to else branch to not have intermediate NULL visible]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We really cannot even get into this as we can't have
a BSS with a 5/10 MHz (scan) width, and therefore all
the code handling shifted rates cannot happen. Remove
it all, since it's broken anyway, at least with MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows to finalize the CSA per link.
In case the switch didn't work, tear down the MLD connection.
Also pass the ieee80211_bss_conf to post_channel_switch to let the
driver know which link completed the switch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we're now protecting everything with the wiphy mutex
(and were really using it for almost everything before),
there's no longer any real reason to have a separate wdev
mutex. It may feel better, but really has no value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the iflist_mtx, so we don't need this mutex any
more in mac80211. However, drivers may also iterate,
and in some cases (e.g. mt76) do so from high-priority
contexts. Thus, keep the mutex around but remove its
usage in mac80211 apart from those driver-visible parts
that are still needed.
Most of this change was done automatically with spatch,
with the parts that are still needed as described above
reverted manually.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the local->mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the chanctx_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the key_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the sta_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Again this should be per link and will get cancellation
issues, move it to a wiphy work.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This work should be made per link as well, and then
will have cancellation issues. Moving it to a wiphy
work already fixes those beforehand.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move the DFS CAC work over to hold the wiphy lock
there without worry about work cancellation.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the connection is a MLO connection, a SMPS request should be
sent on a specific link, as SMPS is BSS specific, and the DA and BSSID
used for the action frame transmission should be the AP MLD address, as
the underlying driver is expected to perform the address translation
(based on the link ID).
Fix the SMPS request handling to use the AP MLD address and provide the
link ID for the request processing during Tx.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Take one more free bit to indicate it's IDR vs. internal
usage, to be able to carve out some bits here for other
internal usage, other than IDR handling with a full ACK
SKB, that is.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Code inspection reveals that we switch the puncturing bitmap
before the real channel switch, since that happens only in
the second round of the worker after the channel context is
switched by ieee80211_link_use_reserved_context().
Fixes: 2cc25e4b2a ("wifi: mac80211: configure puncturing bitmap")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When probing a client, first check if we have it, and then
check for the channel context, otherwise you can trigger
the warning there easily by probing when the AP isn't even
started yet. Since a client existing means the AP is also
operating, we can then keep the warning.
Also simplify the moved code a bit.
Reported-by: syzbot+999fac712d84878a7379@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to all the multi-link handling, we now expose the fact that
the sdata/vif is locked to drivers, e.g. when the driver uses
ieee80211_set_monitor_channel(). This was true when a chanctx
is added to or removed from a link, _except_ in monitor mode
with the virtual sdata/vif. Change that, so that drivers can
make that assumption.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.a5cf7534beda.I5b51664231abee27e02f222083df7ccf88722929@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Doing this simplifies the code somewhat, as iteration over the
nontransmitted BSSs is not required anymore. Also, mac80211 should
not be iterating over the nontrans_list as it should only be accessed
while the bss_lock is held.
It also simplifies parsing of the IEs somewhat, as cfg80211 already
extracts the IEs and passes them to the callback.
Note that the only user left requiring parsing a specific BSS is the
association code if a beacon is required by the hardware.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.39ebfe2f9e59.Ia012b08e0feed8ec431b666888b459f6366f7bd1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As a preparation to support disabled/dormant links, add the
following function:
- ieee80211_vif_usable_links(): returns the bitmap of the links
that can be activated. Use this function in all the places that
the bitmap of the usable links is needed.
- ieee80211_vif_is_mld(): returns true iff the vif is an MLD.
Use this function in all the places where an indication that the
connection is a MLD is needed.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.86e3351da1fc.If6fe3a339fda2019f13f57ff768ecffb711b710a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_vif_set_links requires the sdata->local->mtx lock to be held.
Add the appropriate locking around the calls in both the link add and
remove handlers.
This causes a warning when e.g. ieee80211_link_release_channel is called
via ieee80211_link_stop from ieee80211_vif_update_links.
Fixes: 0d8c4a3c86 ("wifi: mac80211: implement add/del interface link callbacks")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.fa0c6597fdad.I83dd70359f6cda30f86df8418d929c2064cf4995@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move the beacon loss work that might cause a disconnect
and the CSA disconnect work to be wiphy work, so we hold
the wiphy lock for them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a number of upcoming things in both the stack and
drivers that would otherwise conflict, so merge wireless to
wireless-next to be able to avoid those conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When stopping the AP, there might be a color change in progress. It
should be deactivated here, or the driver might later finalize a color
change on a stopped AP.
Fixes: 5f9404abdf (mac80211: add support for BSS color change)
Signed-off-by: Michael Lee <michael-cy.lee@mediatek.com>
Link: https://lore.kernel.org/r/20230504080441.22958-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
'changed' can be OR'ed with BSS_CHANGED_EHT_PUNCTURING which is larger than
an u32.
So, turn 'changed' into an u64 and update ieee80211_set_after_csa_beacon()
accordingly.
In the commit in Fixes, only ieee80211_start_ap() was updated.
Fixes: 2cc25e4b2a ("wifi: mac80211: configure puncturing bitmap")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/e84a3f80fe536787f7a2c7180507efc36cd14f95.1682358088.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* TC offload support for drivers below mac80211
* reduced neighbor report (RNR) handling for AP mode
* mac80211 mesh fast-xmit and fast-rx support
* support for another mesh A-MSDU format
(seems nobody got the spec right)
Major driver changes:
Kalle moved the drivers that were just plain C files
in drivers/net/wireless/ to legacy/ and virtual/ dirs.
hwsim
* multi-BSSID support
* some FTM support
ath11k
* MU-MIMO parameters support
* ack signal support for management packets
rtl8xxxu
* support for RTL8710BU aka RTL8188GU chips
rtw89
* support for various newer firmware APIs
ath10k
* enabled threaded NAPI on WCN3990
iwlwifi
* lots of work for multi-link/EHT (wifi7)
* hardware timestamping support for some devices/firwmares
* TX beacon protection on newer hardware
-----BEGIN PGP SIGNATURE-----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=Zi6X
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Major stack changes:
* TC offload support for drivers below mac80211
* reduced neighbor report (RNR) handling for AP mode
* mac80211 mesh fast-xmit and fast-rx support
* support for another mesh A-MSDU format
(seems nobody got the spec right)
Major driver changes:
Kalle moved the drivers that were just plain C files
in drivers/net/wireless/ to legacy/ and virtual/ dirs.
hwsim
* multi-BSSID support
* some FTM support
ath11k
* MU-MIMO parameters support
* ack signal support for management packets
rtl8xxxu
* support for RTL8710BU aka RTL8188GU chips
rtw89
* support for various newer firmware APIs
ath10k
* enabled threaded NAPI on WCN3990
iwlwifi
* lots of work for multi-link/EHT (wifi7)
* hardware timestamping support for some devices/firwmares
* TX beacon protection on newer hardware
* tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (181 commits)
wifi: clean up erroneously introduced file
wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del()
wifi: iwlwifi: separate AP link management queues
wifi: iwlwifi: mvm: free probe_resp_data later
wifi: iwlwifi: bump FW API to 75 for AX devices
wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta
wifi: iwlwifi: mvm: send full STA during HW restart
wifi: iwlwifi: mvm: rework active links counting
wifi: iwlwifi: mvm: update mac config when assigning chanctx
wifi: iwlwifi: mvm: use the correct link queue
wifi: iwlwifi: mvm: clean up mac_id vs. link_id in MLD sta
wifi: iwlwifi: mvm: fix station link data leak
wifi: iwlwifi: mvm: initialize max_rc_amsdu_len per-link
wifi: iwlwifi: mvm: use appropriate link for rate selection
wifi: iwlwifi: mvm: use the new lockdep-checking macros
wifi: iwlwifi: mvm: remove chanctx WARN_ON
wifi: iwlwifi: mvm: avoid sending MAC context for idle
wifi: iwlwifi: mvm: remove only link-specific AP keys
wifi: iwlwifi: mvm: skip inactive links
wifi: iwlwifi: mvm: adjust iwl_mvm_scan_respect_p2p_go_iter() for MLO
...
====================
Link: https://lore.kernel.org/r/20230330205612.921134-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Generate EMA beacons, each including MBSSID and RNR elements at a given
index. If number of stored RNR elements is more than the number of
MBSSID elements then add those in every EMA beacon.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20230323113801.6903-3-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add APIs to generate an array of beacons for an EMA AP (enhanced
multiple BSSID advertisements), each including a single MBSSID element.
EMA profile periodicity equals the count of elements.
- ieee80211_beacon_get_template_ema_list() - Generate and return all
EMA beacon templates. Drivers must call ieee80211_beacon_free_ema_list()
to free the memory. No change in the prototype for the existing API,
ieee80211_beacon_get_template(), which should be used for non-EMA AP.
- ieee80211_beacon_get_template_ema_index() - Generate a beacon which
includes the multiple BSSID element at the given index. Drivers can use
this function in a loop until NULL is returned which indicates end of
available MBSSID elements.
- ieee80211_beacon_free_ema_list() - free the memory allocated for the
list of EMA beacon templates.
Modify existing functions ieee80211_beacon_get_ap(),
ieee80211_get_mbssid_beacon_len() and ieee80211_beacon_add_mbssid()
to accept a new parameter for EMA index.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20221206005040.3177-2-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When userspace sets basic rates, it might send us some rates
list that's empty or consists of invalid values only. We're
currently ignoring invalid values and then may end up with a
rates bitmap that's empty, which later results in a warning.
Reject the call if there were no valid rates.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Given the code in cfg80211, EHT capa cannot be non-NULL when
HE capa is NULL, but it's easier to reason about it if both
are checked and the compiler will likely integrate the check
with the previous one for HE capa anyway.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.7413d50d23bc.I6fef7484721be9bd5364f64921fc5e9168495f62@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Configure the bitmap in link_conf and notify the driver.
- Modify 'change' in ieee80211_start_ap() from u32 to u64 to support
BSS_CHANGED_EHT_PUNCTURING.
- Propagate the bitmap in channel switch events to userspace.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Link: https://lore.kernel.org/r/20230131001227.25014-5-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Handle the Puncturing info received from the AP in the
EHT Operation element in beacons.
If the info is invalid:
- during association: disable EHT connection for the AP
- after association: disconnect
This commit includes many (internal) bugfixes and spec
updates various people.
Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://lore.kernel.org/r/20230127123930.4fbc74582331.I3547481d49f958389f59dfeba3fcc75e72b0aa6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move color collision report in a dedicated delayed work and do not run
it in interrupt context in order to rate-limit the number of events
reported to userspace. Moreover grab wdev mutex in
ieee80211_color_collision_detection_work routine since it is required
by cfg80211_obss_color_collision_notify().
Tested-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Fixes: 5f9404abdf ("mac80211: add support for BSS color change")
Link: https://lore.kernel.org/r/3f6cf60c892ad40c1cca4a55d62b1224ef1c6ce9.1674644379.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Somehow an extra 'e' slipped in there without anyone noticing,
drop that from ieeee80211_obss_color_collision_notify().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adding flags for SU Beamformer, SU Beamformee, MU Beamformer and Full
Bandwidth UL MU-MIMO for HE. This is utilized to pass MU-MIMO
configurations from user space to driver in AP mode.
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Link: https://lore.kernel.org/r/1665006886-23874-2-git-send-email-quic_msinada@quicinc.com
[fixed indentation, removed redundant !!]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adding flags for SU Beamformer, SU Beamformee, MU Beamformer and
MU Beamformee for VHT. This is utilized to pass MU-MIMO
configurations from user space to driver in AP mode.
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Link: https://lore.kernel.org/r/1665006886-23874-1-git-send-email-quic_msinada@quicinc.com
[fixed indentation, removed redundant !!]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless-next.
96f134dc19 wifi: mt76: handle possible mt76_rx_token_consume failures
fe13dad899 wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
