Commit graph

2801 commits

Author SHA1 Message Date
Linus Torvalds
ac0f6f927d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits)
  ARM: Eliminate decompressor -Dstatic= PIC hack
  ARM: 5958/1: ARM: U300: fix inverted clk round rate
  ARM: 5956/1: misplaced parentheses
  ARM: 5955/1: ep93xx: move timer defines into core.c and document
  ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c
  ARM: 5953/1: ep93xx: fix broken build of clock.c
  ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
  ARM: 5949/1: NUC900 add gpio virtual memory map
  ARM: 5948/1: Enable timer0 to time4 clock support for nuc910
  ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk
  ARM: make_coherent(): fix problems with highpte, part 2
  MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
  ARM: 5945/1: ep93xx: include correct irq.h in core.c
  ARM: 5933/1: amba-pl011: support hardware flow control
  ARM: 5930/1: Add PKMAP area description to memory.txt.
  ARM: 5929/1: Add checks to detect overlap of memory regions.
  ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
  ARM: 5927/1: Make delimiters of DMA area globally visibly.
  ARM: 5926/1: Add "Virtual kernel memory..." printout.
  ARM: 5920/1: OMAP4: Enable L2 Cache
  ...

Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-03-01 09:15:15 -08:00
Linus Torvalds
524df55725 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (252 commits)
  ASoC: Check progress when reporting periods from i.MX FIQ handler
  ASoC: Remove a unused variables from i.MX FIQ runtime data
  ALSA: hda - Add/fix ALC269 FSC and Quanta models
  ALSA: hda - Add ALC670 codec support
  OMAP4: PMIC: Add support for twl6030 codec
  ALSA: hda - remove unnecessary msleep on power state transitions
  usb/gadget/{f_audio,gmidi}.c: follow recent changes in audio.h
  ASoC: fsi: Modify over/under run error settlement
  ASoC: OMAP4: Add McPDM platform driver
  ASoC: OMAP4: Add support for McPDM
  ASoC: OMAP: data_type and sync_mode configurable in audio dma
  ALSA: hda - Add missing description in HD-Audio-Models.txt
  ALSA: add support for Macbook Air 2,1 internal speaker
  ALSA: usbaudio: consolidate header files
  ALSA: usbmixer: bail out early when parsing audio class v2 descriptors
  ALSA: usbaudio: implement basic set of class v2.0 parser
  ALSA: usbaudio: introduce new types for audio class v2
  ALSA: usbaudio: parse USB descriptors with structs
  ALSA: hda - enable snoop for Intel Cougar Point
  ALSA: hda - Remove identical definitions for macmini3 model
  ...
2010-03-01 08:58:44 -08:00
Takashi Iwai
6679ee1870 Merge branch 'topic/asoc' into for-linus 2010-03-01 12:38:59 +01:00
Linus Torvalds
6556a67435 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (172 commits)
  perf_event, amd: Fix spinlock initialization
  perf_event: Fix preempt warning in perf_clock()
  perf tools: Flush maps on COMM events
  perf_events, x86: Split PMU definitions into separate files
  perf annotate: Handle samples not at objdump output addr boundaries
  perf_events, x86: Remove superflous MSR writes
  perf_events: Simplify code by removing cpu argument to hw_perf_group_sched_in()
  perf_events, x86: AMD event scheduling
  perf_events: Add new start/stop PMU callbacks
  perf_events: Report the MMAP pgoff value in bytes
  perf annotate: Defer allocating sym_priv->hist array
  perf symbols: Improve debugging information about symtab origins
  perf top: Use a macro instead of a constant variable
  perf symbols: Check the right return variable
  perf/scripts: Tag syscall_name helper as not yet available
  perf/scripts: Add perf-trace-python Documentation
  perf/scripts: Remove unnecessary PyTuple resizes
  perf/scripts: Add syscall tracing scripts
  perf/scripts: Add Python scripting engine
  perf/scripts: Remove check-perf-trace from listed scripts
  ...

Fix trivial conflict in tools/perf/util/probe-event.c
2010-02-28 10:20:25 -08:00
Linus Torvalds
e0d272429a Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits)
  ftrace: Add function names to dangling } in function graph tracer
  tracing: Simplify memory recycle of trace_define_field
  tracing: Remove unnecessary variable in print_graph_return
  tracing: Fix typo of info text in trace_kprobe.c
  tracing: Fix typo in prof_sysexit_enable()
  tracing: Remove CONFIG_TRACE_POWER from kernel config
  tracing: Fix ftrace_event_call alignment for use with gcc 4.5
  ftrace: Remove memory barriers from NMI code when not needed
  tracing/kprobes: Add short documentation for HAVE_REGS_AND_STACK_ACCESS_API
  s390: Add pt_regs register and stack access API
  tracing/kprobes: Make Kconfig dependencies generic
  tracing: Unify arch_syscall_addr() implementations
  tracing: Add notrace to TRACE_EVENT implementation functions
  ftrace: Allow to remove a single function from function graph filter
  tracing: Add correct/incorrect to sort keys for branch annotation output
  tracing: Simplify test for function_graph tracing start point
  tracing: Drop the tr check from the graph tracing path
  tracing: Add stack dump to trace_printk if stacktrace option is set
  tracing: Use appropriate perl constructs in recordmcount.pl
  tracing: optimize recordmcount.pl for offsets-handling
  ...
2010-02-28 10:17:55 -08:00
Ingo Molnar
6fb83029db Merge branch 'tracing/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into tracing/core 2010-02-27 10:06:10 +01:00
Linus Torvalds
2b8c70b217 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits)
  V4L-DVB: cx88-dvb: remove extra attribution for core
  V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index
  V4L/DVB: Add support for SMT7020 to cx88
  V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment
  V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix
  V4L/DVB: gspca_stv06xx: Add support for camera button
  V4L/DVB: gspca_ov519: add support for the button on ov511 based cams
  V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams
  V4L/DVB: gspca_ov519: add support for the button on ov519 based cams
  V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set
  V4L/DVB: gspca_main: some input error handling fixes
  V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs
  V4L/DVB: gspca_pac7302: much improved exposure control
  V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras
  V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls
  V4L/DVB: Documentation: gspca.txt: update known mr97310a cams
  V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix
  V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480
  V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls
  V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl
  ...
2010-02-26 17:16:20 -08:00
Linus Torvalds
f24407d2bd Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-vipt
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-vipt:
  xfs: fix xfs to work with Virtually Indexed architectures
  sh: add mm API for DMA to vmalloc/vmap areas
  arm: add mm API for DMA to vmalloc/vmap areas
  parisc: add mm API for DMA to vmalloc/vmap areas
  mm: add coherence API for DMA to vmalloc/vmap areas
2010-02-26 17:05:10 -08:00
Linus Torvalds
64d497f553 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits)
  sh: remove dead LED code for migo-r and ms7724se
  sh: ecovec build fix for CONFIG_I2C=n
  sh: ecovec r-standby support
  sh: ms7724se r-standby support
  sh: SH-Mobile R-standby register save/restore
  clocksource: Fix up a registration/IRQ race in the sh drivers.
  sh: ms7724: modify scan_timing for KEYSC
  sh: ms7724: Add sh_sir support
  sh: mach-ecovec24: Add sh_sir support
  sh: wire up SET/GET_UNALIGN_CTL.
  sh: allow alignment fault mode to be configured at kernel boot.
  sh: sh7724: Update FSI/SPU2 clock
  sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec
  sh: add sh7724 kick callback to clk_div4_table
  sh: introduce struct clk_div4_table
  sh: clock-cpg div4 set_rate() shift fix
  sh: Turn on speculative return for SH7785 and SH7786
  sh: Merge legacy and dynamic PMB modes.
  sh: Use uncached I/O helpers in PMB setup.
  sh: Provide uncached I/O helpers.
  ...
2010-02-26 16:54:27 -08:00
Kuninori Morimoto
3675c750cf soc-camera: ov772x: Modify buswidth control
This patch removes "buswidth" struct member, and sets the default buswidth
to the natively supported 10 bit. You can select 8 bit buswidth by new flag.
This patch also modify ap325rxa/migor setup.c

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:11:00 -03:00
Magnus Damm
b5f5fe80fa sh: remove dead LED code for migo-r and ms7724se
CONFIG_PM is always set on SH-Mobile these days so
get rid of the unused LED setup code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:30:09 +09:00
Magnus Damm
6b3b55750b sh: ecovec build fix for CONFIG_I2C=n
Allow building the ecovec board support code
even though I2C support is disabled.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:30:08 +09:00
Magnus Damm
2839bd61f6 sh: ecovec r-standby support
This patch adds board specific r-standby resume code
for ecovec.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:29:28 +09:00
Magnus Damm
b67cf2848a sh: ms7724se r-standby support
This patch adds board specific r-standby resume code
for ms7724se.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:29:27 +09:00
Magnus Damm
41bfb7d7a6 sh: SH-Mobile R-standby register save/restore
Add code to save/restore registers during
R-standby sleep on SH-Mobile processors.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26 15:29:26 +09:00
Russell King
9f33be2c3a Merge branches 'clks' and 'pnx' into devel 2010-02-25 22:10:38 +00:00
Kuninori Morimoto
29463c28a5 sh: ms7724: modify scan_timing for KEYSC
KEYSC::SCN register of SH7724 is 3bit.
Thus, scan_timing should be 0 - 7 here.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25 16:31:29 +09:00
Kuninori Morimoto
bbb892aac4 sh: ms7724: Add sh_sir support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25 16:31:28 +09:00
Kuninori Morimoto
2636571685 sh: mach-ecovec24: Add sh_sir support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25 16:31:28 +09:00
Paul Mundt
94ea5e449a sh: wire up SET/GET_UNALIGN_CTL.
This hooks up the SET/GET_UNALIGN_CTL knobs cribbing the bulk of it from
the PPC and ia64 implementations. The thread flags happen to be the
logical inverse of what the global fault mode is set to, so this works
out pretty cleanly. By default the global fault mode is used, with tasks
now being able to override their own settings via prctl().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-23 12:56:30 +09:00
Paul Mundt
7c1b2c6890 sh: allow alignment fault mode to be configured at kernel boot.
Follow the ARM change, which is what our alignment helpers are based on
in the first place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-23 11:48:50 +09:00
Dominik Brodowski
3b7a17fcda resource/PCI: mark struct resource as const
Now that we return the new resource start position, there is no
need to update "struct resource" inside the align function.
Therefore, mark the struct resource as const.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:16:57 -08:00
Dominik Brodowski
b26b2d494b resource/PCI: align functions now return start of resource
As suggested by Linus, align functions should return the start
of a resource, not void. An update of "res->start" is no longer
necessary.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:16:56 -08:00
Kuninori Morimoto
16afc9fb02 sh: sh7724: Update FSI/SPU2 clock
When FSI and Network (= NFS file system) were used at the same time,
the I/O of FSI was unstable.  This patch updates the SPU2 clock (which
is used for FSI) to solve this issue.  Special thanks to Jeremy.

Signed-off-by: Jeremy Baker <Jeremy.Baker@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22 19:14:18 +09:00
Magnus Damm
6f26d19fce sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec
Update the sh7724 processor code to always enable vpu_clk.

On the Ecovec board, set the vpu_clk to 166 Mhz.

The 166MHz setting results in a divide-by-6 setup for
vpu_clk and improves the VPU performance compared to the
power-on-reset/bootloader configuration.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22 19:11:23 +09:00
Magnus Damm
7be85c6eb4 sh: add sh7724 kick callback to clk_div4_table
This patch adds a ->kick() callback to clk_div4_table
and ties it into sh_clk_div4_set_rate(). A sh7724
specific kick function is also added that updates the
KICK bit whenever div4 clocks in FRQCRA and FRQCRB
have been set. Allows us to set the VPU clock.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22 19:11:22 +09:00
Magnus Damm
0a5f337ecd sh: introduce struct clk_div4_table
This patch introduces struct clk_div4_table. The structure
will be used to keep div4 specific data, and is with this
patch replacing the struct clk_div_mult_table pointer arg
used by the sh_clk_div4_register() functions.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22 19:11:20 +09:00
Magnus Damm
de7ca2144c sh: clock-cpg div4 set_rate() shift fix
Make sure the div4 bitfield is shifted according
to the enable_bit value in sh_clk_div4_set_rate().

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22 19:11:19 +09:00
Russell King
4b3073e1c5 MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
On VIVT ARM, when we have multiple shared mappings of the same file
in the same MM, we need to ensure that we have coherency across all
copies.  We do this via make_coherent() by making the pages
uncacheable.

This used to work fine, until we allowed highmem with highpte - we
now have a page table which is mapped as required, and is not available
for modification via update_mmu_cache().

Ralf Beache suggested getting rid of the PTE value passed to
update_mmu_cache():

  On MIPS update_mmu_cache() calls __update_tlb() which walks pagetables
  to construct a pointer to the pte again.  Passing a pte_t * is much
  more elegant.  Maybe we might even replace the pte argument with the
  pte_t?

Ben Herrenschmidt would also like the pte pointer for PowerPC:

  Passing the ptep in there is exactly what I want.  I want that
  -instead- of the PTE value, because I have issue on some ppc cases,
  for I$/D$ coherency, where set_pte_at() may decide to mask out the
  _PAGE_EXEC.

So, pass in the mapped page table pointer into update_mmu_cache(), and
remove the PTE value, updating all implementations and call sites to
suit.

Includes a fix from Stephen Rothwell:

  sparc: fix fallout from update_mmu_cache API change

  Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20 16:41:46 +00:00
Matt Fleming
8c563a30cd sh: Turn on speculative return for SH7785 and SH7786
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-18 18:54:18 +09:00
Paul Mundt
77f36fcc03 Merge branch 'sh/pmb-dynamic' 2010-02-18 18:35:20 +09:00
Paul Mundt
d01447b319 sh: Merge legacy and dynamic PMB modes.
This implements a bit of rework for the PMB code, which permits us to
kill off the legacy PMB mode completely. Rather than trusting the boot
loader to do the right thing, we do a quick verification of the PMB
contents to determine whether to have the kernel setup the initial
mappings or whether it needs to mangle them later on instead.

If we're booting from legacy mappings, the kernel will now take control
of them and make them match the kernel's initial mapping configuration.
This is accomplished by breaking the initialization phase out in to
multiple steps: synchronization, merging, and resizing. With the recent
rework, the synchronization code establishes page links for compound
mappings already, so we build on top of this for promoting mappings and
reclaiming unused slots.

At the same time, the changes introduced for the uncached helpers also
permit us to dynamically resize the uncached mapping without any
particular headaches. The smallest page size is more than sufficient for
mapping all of kernel text, and as we're careful not to jump to any far
off locations in the setup code the mapping can safely be resized
regardless of whether we are executing from it or not.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-18 18:13:51 +09:00
Paul Mundt
2e450643d7 sh: Use uncached I/O helpers in PMB setup.
The PMB code is an example of something that spends an absurd amount of
time running uncached when only a couple of operations really need to be.
This switches over to the shiny new uncached helpers, permitting us to
spend far more time running cached.

Additionally, MMUCR twiddling is perfectly safe from cached space given
that it's paired with a control register barrier, so fix that up, too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-18 13:26:05 +09:00
Paul Mundt
b8f7918f33 sh: Provide uncached I/O helpers.
There are lots of registers that can only be updated from the uncached
mapping, so we add some helpers for those cases in order to make it
easier to ensure that we only make the jump when it's absolutely
necessary.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-18 13:23:30 +09:00
Paul Mundt
d53a0d33bc sh: PMB locking overhaul.
This implements some locking for the PMB code. A high level rwlock is
added for dealing with rw accesses on the entry map while a per-entry
data structure spinlock is added to deal with the PMB entry changing out
from underneath us.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 21:17:02 +09:00
Mike Frysinger
e7b8e675d9 tracing: Unify arch_syscall_addr() implementations
Most implementations of arch_syscall_addr() are the same, so create a
default version in common code and move the one piece that differs (the
syscall table) to asm/syscall.h.  New arch ports don't have to waste
time copying & pasting this simple function.

The s390/sparc versions need to be different, so document why.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1264498803-17278-1-git-send-email-vapier@gentoo.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-17 13:07:21 +01:00
Paul Mundt
0065b96775 sh: Fix up dynamically created write-through PMB mappings.
Write-through PMB mappings still require the cache bit to be set, even if
they're to be flagged with a different cache policy and bufferability
bit. To reduce some of the confusion surrounding the flag encoding we
centralize the cache mask based on the system cache policy while we're at
it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 18:05:23 +09:00
Paul Mundt
d7813bc9e8 sh: Build PMB entry links for existing contiguous multi-page mappings.
This plugs in entry sizing support for existing mappings and then builds
on top of that for linking together entries that are mapping contiguous
areas. This will ultimately permit us to coalesce mappings and promote
head pages while reclaiming PMB slots for dynamic remapping.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 17:56:38 +09:00
Paul Mundt
9edef28653 sh: uncached mapping helpers.
This adds some helper routines for uncached mapping support. This
simplifies some of the cases where we need to check the uncached mapping
boundaries in addition to giving us a centralized location for building
more complex manipulation on top of.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 16:28:00 +09:00
Paul Mundt
51becfd962 sh: PMB tidying.
Some overdue cleanup of the PMB code, killing off unused functionality
and duplication sprinkled about the tree.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 15:33:30 +09:00
Paul Mundt
7bdda6209f sh: Fix up more 64-bit pgprot truncation on SH-X2 TLB.
Both the store queue API and the PMB remapping take unsigned long for
their pgprot flags, which cuts off the extended protection bits. In the
case of the PMB this isn't really a problem since the cache attribute
bits that we care about are all in the lower 32-bits, but we do it just
to be safe. The store queue remapping on the other hand depends on the
extended prot bits for enabling userspace access to the mappings.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 13:23:00 +09:00
Magnus Damm
838a4a9dce sh: fix sh7723 SDHI support using INTC force_disable
Update the sh7723 INTC tables with force_enable support
to mask out pending unsupported SDHI interrupt sources.

Without this patch the kernel locks up due to a pending
SDHI interrupt that the tmio_mmc driver cannot handle.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 12:45:44 +09:00
Magnus Damm
e9125ac0bf sh: fix sh7722 SDHI support using INTC force_disable
Update the sh7722 INTC tables with force_enable support
to mask out pending unsupported SDHI interrupt sources.

Without this patch the kernel locks up due to a pending
SDHI interrupt that the tmio_mmc driver cannot handle.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 12:45:43 +09:00
Paul Mundt
49f3bfe933 sh: Setup boot CPU VBR early to enable early page faults.
vmemmap and the vmsplit code amongst others need to be able to take page
faults much earlier than trap_init() time, so move this in to the early
CPU initialization. VBR setup for secondary CPUs is already handled
through start_secondary(), so we only need to do this for the boot CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 12:33:22 +09:00
Paul Mundt
1d5cfcdff7 sh: Kill off some superfluous legacy PMB special casing.
The __va()/__pa() offsets and the boot memory offsets are consistent for
all PMB users, so there is no need to special case these for legacy PMB.
Kill the special casing off and depend on CONFIG_PMB across the board.
This also fixes up yet another addressing bug for sh64.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-16 21:43:38 +09:00
Paul Mundt
efd54ea315 sh: Merge the legacy PMB mapping and entry synchronization code.
This merges the code for iterating over the legacy PMB mappings and the
code for synchronizing software state with the hardware mappings. There's
really no reason to do the same iteration twice, and this also buys us
the legacy entry logging facility for the dynamic PMB case.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-16 18:39:30 +09:00
Paul Mundt
55cef91a5d sh: Prevent fixed slot PMB remapping from clobbering boot entries.
The PMB initialization code walks the entries and synchronizes the
software PMB state with the hardware mappings, preserving the slot index.
Unfortunately pmb_alloc() only tested the bit position in the entry map
and failed to set it, resulting in subsequent remaps being able to be
dynamically assigned a slot that trampled an existing boot mapping with
general badness ensuing.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-16 17:14:04 +09:00
Nobuhiro Iwamatsu
319c2cc761 sh: Fix zImage boot using fixed PMB.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-16 13:50:26 +09:00
Magnus Damm
fb1e776050 sh: fix sh7724 SDHI support using INTC force_disable
Update the sh7724 INTC tables with force_enable support
to mask out pending unsupported SDHI interrupt sources.

Without this patch the kernel locks up due to a pending
SDHI interrupt that the tmio_mmc driver cannot handle.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-16 13:38:57 +09:00
Paul Mundt
04c8697355 sh: Fix up legacy PMB mode offset calculation.
The change for fixing up sh64 inadvertently inverted the logic for legacy
PMB, fix that back up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-15 16:10:57 +09:00