[ Upstream commit 968667f2e0 ]
With commit cf75ad8b41 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED"),
the power off sequence got refactored so that this timeout was no longer
necessary, let's remove the leftover define from the header too.
Fixes: cf75ad8b41 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 257310e998 ]
Simplify stats accumulation logic to fix the case where we don't take
previous stat value into account, we should always respect it.
Main netdev stats of our PF (Tx/Rx packets/bytes) were reported orders of
magnitude too big during OpenStack reconfiguration events, possibly other
reconfiguration cases too.
The regression was reported to be between 6.1 and 6.2, so I was almost
certain that on of the two "preserve stats over reset" commits were the
culprit. While reading the code, it was found that in some cases we will
increase the stats by arbitrarily large number (thanks to ignoring "-prev"
part of condition, after zeroing it).
Note that this fixes also the case where we were around limits of u64, but
that was not the regression reported.
Full disclosure: I remember suggesting this particular piece of code to
Ben a few years ago, so blame on me.
Fixes: 2fd5e433cd ("ice: Accumulate HW and Netdev statistics over reset")
Reported-by: Nebojsa Stevanovic <nebojsa.stevanovic@gcore.com>
Link: https://lore.kernel.org/intel-wired-lan/VI1PR02MB439744DEDAA7B59B9A2833FE912EA@VI1PR02MB4397.eurprd02.prod.outlook.com
Reported-by: Christian Rohmann <christian.rohmann@inovex.de>
Link: https://lore.kernel.org/intel-wired-lan/f38a6ca4-af05-48b1-a3e6-17ef2054e525@inovex.de
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee14cc9ea1 ]
Fix "double" clearing of interrupts, which can cause external events
or timestamps to be missed.
The E1000_TSIRC Time Sync Interrupt Cause register can be cleared in two
ways, by either reading it or by writing '1' into the specific cause
bit. This is documented in section 8.16.1.
The following flow was used:
1. read E1000_TSIRC into 'tsicr';
2. handle the interrupts present into 'tsirc' and mark them in 'ack';
3. write 'ack' into E1000_TSICR;
As both (1) and (3) will clear the interrupt cause, if the same
interrupt happens again between (1) and (3) it will be ignored,
causing events to be missed.
Remove the extra clear in (3).
Fixes: 00c65578b4 ("igb: enable internal PPS for the i210")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 244ae992e3 ]
Fix "double" clearing of interrupts, which can cause external events
or timestamps to be missed.
The IGC_TSIRC Time Sync Interrupt Cause register can be cleared in two
ways, by either reading it or by writing '1' into the specific cause
bit. This is documented in section 8.16.1.
The following flow was used:
1. read IGC_TSIRC into 'tsicr';
2. handle the interrupts present in 'tsirc' and mark them in 'ack';
3. write 'ack' into IGC_TSICR;
As both (1) and (3) will clear the interrupt cause, if the same
interrupt happens again between (1) and (3) it will be ignored,
causing events to be missed.
Remove the extra clear in (3).
Fixes: 2c344ae245 ("igc: Add support for TX timestamping")
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel i225
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39714fd73c ]
Make pci_dev_is_disconnected() public so that it can be called from
Intel VT-d driver to quickly fix/workaround the surprise removal
unplug hang issue for those ATS capable devices on PCIe switch downstream
hotplug capable ports.
Beside pci_device_is_present() function, this one has no config space
space access, so is light enough to optimize the normal pure surprise
removal and safe removal flow.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Haorong Ye <yehaorong@bytedance.com>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20240301080727.3529832-2-haifeng.zhao@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: 4fc82cd907 ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4152222e0 ]
The kzalloc() in brcmf_pmksa_v3_op() will return null if the
physical memory has run out. As a result, if we dereference
the null value, the null pointer dereference bug will happen.
Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails
for pmk_op.
Fixes: a96202acae ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations")
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240229103153.18533-1-duoming@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c238adbc57 ]
total_fa_cnt is supposed to include cck_fa_cnt and ofdm_fa_cnt, not just
ofdm_fa_cnt.
Fixes: 960361238b ("rtw88: 8821c: add false alarm statistics")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/f3cb6d17-e4e4-44a7-9c9b-72aed994b5c9@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1dfa21427 ]
Tenda U9 V2.0, which contains RTL8811CU, is practically unusable because
of frequent disconnections:
Feb 23 14:46:45 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:46:46 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
bssid=90:55:de:__:__:__ reason=4 locally_generated=1
Feb 23 14:46:52 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED
- Connection to 90:55:de:__:__:__ completed [id=0 id_str=]
Feb 23 14:46:54 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:46:55 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
bssid=90:55:de:__:__:__ reason=4 locally_generated=1
Feb 23 14:47:01 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-CONNECTED
- Connection to 90:55:de:__:__:__ completed [id=0 id_str=]
Feb 23 14:47:04 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-BEACON-LOSS
Feb 23 14:47:05 ideapad2 wpa_supplicant[427]: wlp3s0f3u2: CTRL-EVENT-DISCONNECTED
bssid=90:55:de:__:__:__ reason=4 locally_generated=1
This is caused by a mistake in the chip initialisation. This version of
the chip requires loading an extra AGC table right after the main one,
but the extra table is being loaded at the wrong time, in
rtw_chip_board_info_setup().
Move the extra AGC table loading to the right place, in
rtw_phy_load_tables().
The rtw_chip_board_info_setup() can only do "software" things, and
rtw_phy_load_tables() can really do IO.
Fixes: 5d6651fe85 ("rtw88: 8821c: support RFE type2 wifi NIC")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/276c31d8-b9a8-4e54-a3ac-09b74657aff7@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41a7acb7dd ]
RTL8822CU, RTL8822BU, and RTL8821CU need an extra register write after
reading and writing certain addresses.
Without this, the firmware upload fails approximately more than 50% of
the time.
Tested with RTL8811CU (Tenda U9 V2.0) which is the same as RTL8821CU
but without Bluetooth.
Fixes: a82dfd33d1 ("wifi: rtw88: Add common USB chip support")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/f12ed39d-28e8-4b8b-8d22-447bcf295afc@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a51ab63b29 ]
As there are some AMD processors which only support CPPC V2 firmware and
BIOS implementation, the amd_pstate driver will be failed to load when
system booting with below kernel warning message:
[ 0.477523] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
To make the amd_pstate driver can be loaded on those TR40 processors, it
needs to match x86_model from 0x30 to 0x7F for family 17H.
With the change, the system can load amd_pstate driver as expected.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Gino Badouri <badouri.g@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218171
Fixes: fbd74d1689 ("ACPI: CPPC: Fix enabling CPPC on AMD systems with shared memory")
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae5004a40a ]
This looks strange to call release_mem_region() in a remove function
without any request_mem_region() in the probe or "struct resource"
somewhere.
So remove the corresponding code.
Fixes: 3a96dff0f8 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bb0bb1ed1e18de55e8c0547625bde271e64b8c31.1708983064.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77dd1e50ff ]
The actual size of the channels registers region is 4MB, according to the
documentation. This issue was not caught until now because the driver was
supposed to allow same regions being mapped multiple times for supporting
multiple buses. Thie driver is using platform_get_resource_byname() and
devm_ioremap() towards that purpose, which intentionally avoids
devm_request_mem_region() altogether.
Fixes: ffc50b2d38 ("arm64: dts: qcom: Add base SM8550 dtsi")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240221-dts-qcom-sm8550-fix-spmi-chnls-size-v2-1-72b5efd9dc4f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cfcfc102a ]
The creds and oa->data need to be freed in the error-handling paths after
their allocation. So this patch add these deallocations in the
corresponding paths.
Fixes: 1d658336b0 ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e67b652d8e ]
The ctx->mech_used.data allocated by kmemdup is not freed in neither
gss_import_v2_context nor it only caller gss_krb5_import_sec_context,
which frees ctx on error.
Thus, this patch reform the last call of gss_import_v2_context to the
gss_krb5_import_ctx_v2, preventing the memleak while keepping the return
formation.
Fixes: 47d8480776 ("gss_krb5: handle new context format from gssd")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaa8736370 ]
When building with CONFIG_XEN_PV=y, .text symbols are emitted into
the .notes section so that Xen can find the "startup_xen" entry point.
This information is used prior to booting the kernel, so relocations
are not useful. In fact, performing relocations against the .notes
section means that the KASLR base is exposed since /sys/kernel/notes
is world-readable.
To avoid leaking the KASLR base without breaking unprivileged tools that
are expecting to read /sys/kernel/notes, skip performing relocations in
the .notes section. The values readable in .notes are then identical to
those found in System.map.
Reported-by: Guixiong Wei <guixiongwei@gmail.com>
Closes: https://lore.kernel.org/all/20240218073501.54555-1-guixiongwei@gmail.com/
Fixes: 5ead97c84f ("xen: Core Xen implementation")
Fixes: da1a679cde ("Add /sys/kernel/notes")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10b4c4bce3 ]
If SAVE and RESTORE unwind hints are in different basic blocks, and
objtool sees the RESTORE before the SAVE, it errors out with:
vmlinux.o: warning: objtool: vmw_port_hb_in+0x242: objtool isn't smart enough to handle this CFI save/restore combo
In such a case, defer following the RESTORE block until the
straight-line path gets followed later.
Fixes: 8faea26e61 ("objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402240702.zJFNmahW-lkp@intel.com/
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240227073527.avcm5naavbv3cj5s@treble
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8037ceb89 ]
The rockchip,trcm-sync-tx-only property is at this time only documented
for the tdm variant of Rockchip i2s controllers.
While there was a series [0] adding code and binding for the property,
it doesn't seem to have gone forward back in 2021.
So for now fix the devicetree check by removing the property from rk3588
i2s controllers until support for it gets merged.
[0] https://patchwork.kernel.org/project/linux-rockchip/patch/1629796734-4243-5-git-send-email-sugar.zhang@rock-chips.com/
Fixes: 8ae112a555 ("arm64: dts: rockchip: Add rk3588s I2S nodes")
Cc: Sugar Zhang <sugar.zhang@rock-chips.com>
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240227164659.705271-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fc19ab75a ]
The dtbscheck reports a warning for a wrong reset-names property for
the i2s2 controller on rk356x socs.
The other controllers on the soc provide tx and rx directions and hence
two resets and separate clocks for each direction, while i2s2 only
provides one reset. This was so far named just "m" which isn't part of
the binding.
The clock-names the controller uses all end in "tx", so use the matching
"tx-m" reset-name for the i2s controller.
Fixes: 755f37010f ("arm64: dts: rockchip: RK356x: Add I2S2 device node")
Acked-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240227173526.710056-2-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1c44d9afa ]
The video-codec@fdea0400 was missing the interrupt-names property that is
part of the binding. Add it.
Fixes: 944be6fba4 ("arm64: dts: rockchip: Add VPU support for RK3568/RK3566")
Cc: Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Acked-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240227173526.710056-1-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 793551c965 ]
It is generally invalid to fail a Device Check notification if the scan
handler has not been attached to the given device after a bus rescan,
because there may be valid reasons for the scan handler to refuse
attaching to the device (for example, the device is not ready).
For this reason, modify acpi_scan_device_check() to return 0 in that
case without printing a warning.
While at it, reduce the log level of the "already enumerated" message
in the same function, because it is only interesting when debugging
notification handling
Fixes: 443fc82022 ("ACPI / hotplug: Rework generic code to handle suprise removals")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 021a67d096 ]
A known issue on some Zen laptops, keyboard stopped working due to commit
9946e39fe8 fael@kernel.org("ACPI: resource: skip IRQ override on AMD
Zen platforms") on kernel 5.19.10.
The ACPI IRQ override is required for this board due to buggy DSDT, thus
adding the board vendor and name to irq1_edge_low_force_override fixes
the issue.
Fixes: 9946e39fe8 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394
Link: https://lore.kernel.org/linux-acpi/20231006123304.32686-1-hdegoede@redhat.com/
Tested-by: Maxim Trofimov <maxvereschagin@gmail.com>
Signed-off-by: Maxim Kudinov <m.kudinovv@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e23ad54fef ]
The Lunnen Ground 15 and 16 needs IRQ overriding for the keyboard to
work.
Adding an entries for these laptops to the override_table makes the
internal keyboard functional.
Signed-off-by: Alexey I. Froloff <raorn@raorn.name>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 021a67d096 ("ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d776cfd5e ]
This devm API takes a consumer device as an argument to setup the devm
action, but throws it away when calling further into gpiolib. This leads
to odd debug messages like this:
(NULL device *): using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup
Let's pass the consumer device down, by directly calling what
fwnode_gpiod_get_index() calls but pass the device used for devm. This
changes the message to look like this instead:
gpio-keys gpio-keys: using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup
Note that callers of fwnode_gpiod_get_index() will still see the NULL
device pointer debug message, but there's not much we can do about that
because the API doesn't take a struct device.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 8eb1f71e7a ("gpiolib: consolidate GPIO lookups")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 531a0c0cdb ]
The userspace consumer can be built as a module but it cannot be
automatically probed as there is no device table to match it up with
device tree nodes.
Add the missing macro so that the module can load automatically.
Fixes: 5c51d4afcf ("regulator: userspace-consumer: Handle regulator-output DT nodes")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://msgid.link/r/20240226160554.1453283-1-jkeeping@inmusicbrands.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ff08803ec ]
The hdmi@3d node's compatible string is "adi,adv7535" instead of
"adi,adv7533" or "adi,adv751*".
Fix the hdmi@3d node by means of:
* Use default register addresses for "cec", "edid" and "packet", because
there is no need to use a non-default address map.
* Add missing interrupt related properties.
* Drop "adi,input-*" properties which are only valid for adv751*.
* Add VEXT_3V3 fixed regulator.
* Add "*-supply" properties, since most are required.
* Fix label names - s/adv7533/adv7535/.
Fixes: 65344b9bed ("arm64: dts: imx8mp-evk: Add HDMI support")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13ab6f174a ]
The SPI NOR bus routing on this board cannot go above 50 MHz,
set the clock frequency to maximum of 40 MHz to be within a
safe margin. Remove the comment as well.
Fixes: 562d222f23 ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79978bff2e ]
We identified that the PHYs actually do not work since commit 7da7b84fee
("ARM: dts: imx6dl-yapp4: Move phy reset into switch node") as
a coincidence of several circumstances.
The reset signal is kept asserted by a pull-down resistor on the board
unless it is deasserted by GPIO from the SoC. This is to keep the switch
dead until it is configured properly by the kernel and user space.
Prior to the referenced commit the switch was reset by the FEC driver
and the reset GPIO was actively deasserted. The mdio-bus was scanned
and the attached switch and its PHYs were found and configured.
With the referenced commit the switch is reset by the qca8k driver.
Because of another bug in the qca8k driver, functionality of the reset
pin depends on its pre-kernel configuration. See commit c44fc98f0a
("net: dsa: qca8k: fix illegal usage of GPIO")
The problem did not appear until we removed support for the switch
and configuration of its reset pin from the bootloader.
To fix that, properly describe the internal mdio-bus configuration of
the qca8334 switch. The PHYs are internal to the switch and sit on its
internal mdio-bus.
Fixes: 7da7b84fee ("ARM: dts: imx6dl-yapp4: Move phy reset into switch node")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 023bd910d3 ]
This change does not have any functional effect. The switch works just
fine without this patch as it has full access to all the addresses
on the bus. This is simply a clean-up to set the node name address
and reg address to the same value.
Fixes: 15b43e497f ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b59348c11 ]
The SPDIF hardware found on the H6 supports both transmit and receive
functions. However it is missing the RX DMA channel.
Add the SPDIF hardware block's RX DMA channel. Also remove the
by-default pinmux, since the end device can choose to implement
either or both functionalities.
Fixes: f95b598df4 ("arm64: dts: allwinner: Add SPDIF node for Allwinner H6")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240127163247.384439-6-wens@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a43e0fc5e9 ]
Unloading a modular pstore backend with records in pstorefs would
trigger the dput() double-drop warning:
WARNING: CPU: 0 PID: 2569 at fs/dcache.c:762 dput.part.0+0x3f3/0x410
Using the combo of d_drop()/dput() (as mentioned in
Documentation/filesystems/vfs.rst) isn't the right approach here, and
leads to the reference counting problem seen above. Use d_invalidate()
and update the code to not bother checking for error codes that can
never happen.
Suggested-by: Alexander Viro <viro@zeniv.linux.org.uk>
Fixes: 609e28bb13 ("pstore: Remove filesystem records when backend is unregistered")
Signed-off-by: Kees Cook <keescook@chromium.org>
[ Upstream commit 1394c1dec1 ]
If we're fragmenting on local output, the original packet may contain
ext data for the MCTP flows. We'll want this in the resulting fragment
skbs too.
So, do a skb_ext_copy() in the fragmentation path, and implement the
MCTP-specific parts of an ext copy operation.
Fixes: 67737c4572 ("mctp: Pass flow data & flow release events to drivers")
Reported-by: Jian Zhang <zhangjian.3032@bytedance.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7edbb5880d ]
All Ethernet AVB instances on R-Car V4H have registers related to UDP/IP
support, but the declared register blocks for the first two instances
are too small to cover them.
Fix this by extending the register block sizes.
Fixes: 848c82db56 ("arm64: dts: renesas: r8a779g0: Add RAVB nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/83437778614a7c96f4d8f1be98dffeee29bb4a0b.1707660323.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c51912331 ]
All Ethernet AVB instances on R-Car V3U have registers related to UDP/IP
support, but the declared register blocks for the first two instances
are too small to cover them.
Fix this by extending the register block sizes.
Fixes: 5a633320f0 ("arm64: dts: renesas: r8a779a0: Add Ethernet-AVB support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ce6ce3c4b1495e02e7c1803fca810a7178a84500.1707660323.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9a46175a7 ]
Because the number of channels to be configured is calculated using the %,
and it results in 0 when there's an exact division, this leads to some
channels not having their tx power configured.
Fixes: 7801da3388 ("wifi: mt76: mt7921: enable set txpower for UNII-4")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07ce1d4637 ]
In some case, the MTCL table will exist, but MTDS table will not.
So the SAR will init fail. This patch make MTCL and MTDS can exist
with no dependence.
Fixes: f965333e49 ("mt76: mt7921: introduce ACPI SAR support")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6351ef999 ]
clc->len is defined as 32 bits in length, so it must also be
operated on with 32 bits, not 16 bits.
Fixes: fa6ad88e02 ("wifi: mt76: mt7921: fix country count limitation for CLC")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312112104.Zkc3QUHr-lkp@intel.com/
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5a5f4413d ]
From commit a304e1b828 ("[PATCH] Debug shared irqs"), there is a test
to make sure the shared irq handler should be able to handle the unexpected
event after deregistration. For this case, let's apply MT76_REMOVED flag to
indicate the device was removed and do not run into the resource access
anymore.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c957280ef6 ]
From commit a304e1b828 ("[PATCH] Debug shared irqs"), there is a test
to make sure the shared irq handler should be able to handle the unexpected
event after deregistration. For this case, let's apply MT76_REMOVED flag to
indicate the device was removed and do not run into the resource access
anymore.
BUG: KASAN: use-after-free in mt7921_irq_handler+0xd8/0x100 [mt7921e]
Read of size 8 at addr ffff88824a7d3b78 by task rmmod/11115
CPU: 28 PID: 11115 Comm: rmmod Tainted: G W L 5.17.0 #10
Hardware name: Micro-Star International Co., Ltd. MS-7D73/MPG B650I
EDGE WIFI (MS-7D73), BIOS 1.81 01/05/2024
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x1f/0x190
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
kasan_report.cold+0x7f/0x11b
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
mt7921_irq_handler+0xd8/0x100 [mt7921e]
free_irq+0x627/0xaa0
devm_free_irq+0x94/0xd0
? devm_request_any_context_irq+0x160/0x160
? kobject_put+0x18d/0x4a0
mt7921_pci_remove+0x153/0x190 [mt7921e]
pci_device_remove+0xa2/0x1d0
__device_release_driver+0x346/0x6e0
driver_detach+0x1ef/0x2c0
bus_remove_driver+0xe7/0x2d0
? __check_object_size+0x57/0x310
pci_unregister_driver+0x26/0x250
__do_sys_delete_module+0x307/0x510
? free_module+0x6a0/0x6a0
? fpregs_assert_state_consistent+0x4b/0xb0
? rcu_read_lock_sched_held+0x10/0x70
? syscall_enter_from_user_mode+0x20/0x70
? trace_hardirqs_on+0x1c/0x130
do_syscall_64+0x5c/0x80
? trace_hardirqs_on_prepare+0x72/0x160
? do_syscall_64+0x68/0x80
? trace_hardirqs_on_prepare+0x72/0x160
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CABXGCsOdvVwdLmSsC8TZ1jF0UOg_F_W3wqLECWX620PUkvNk=A@mail.gmail.com/
Fixes: 9270270d62 ("wifi: mt76: mt7921: fix PCI DMA hang after reboot")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de88827751 ]
Sync the value of HIF_TXD_V2_1 with firmware to let it correctly fill
TXD values for HW path.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3ad99be7c ]
The efuse data starts from the 48th bytes instead of 64th bytes in the
returned event skb.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d52c97592f ]
The EHT MCS map subfield of 20 MHz-Only is not present in the EHT
capability of AP, so STA does not need to parse the subfield.
Moreover, AP should parse the subfield only if STA is 20 MHz-Only, which
can be confirmed by checking supported channel width in HE capability.
Fixes: 92aa2da9fa ("wifi: mt76: mt7996: enable EHT support in firmware")
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c832c228f ]
This patch fixes the following TWT issues:
- Change table_mask to u16 to support up to 16 TWT stations
- Reject TWT flows for duplicated establishment
- Fix possible unaligned pointer
- Remove unsupported TWT_CONTROL_WAKE_DUR_UNIT flag
- The minimum TWT duration supported by mt7996 chipsets is 64. Reply
with TWT_SETUP_CMD_DICTATE if the min_twt_dur is smaller than 64
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c9c25f1dc ]
The PPDU TXS does not include the error bit so it cannot use to report
status to mac80211. This patch fixes issue that STA wrongly detects if AP
is still alive.
Fixes: 2569ea5326 ("wifi: mt76: mt7996: enable PPDU-TxS to host")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonas Dreßler