In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().
Fixes: 4a1d0dbc83 ("drm/panel: simple: add panel-dpi support")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com
The 2711 pixel valve can't produce odd horizontal timings, and
checks were added to vc4_hdmi_encoder_atomic_check and
vc4_hdmi_encoder_mode_valid to filter out/block selection of
such modes.
Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing
values before programming them into the PV. The PV values,
therefore, can not be odd, and so the modes can be supported.
Amend the filtering appropriately.
Fixes: 57fb32e632 ("drm/vc4: hdmi: Block odd horizontal timings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech
The code that set the scdc_enabled flag to ensure it was
disabled at boot time also ran on Pi0-3 where there is no
SCDC support. This lead to a warning in vc4_hdmi_encoder_post_crtc_disable
due to vc4_hdmi_disable_scrambling being called and trying to
read (and write) register HDMI_SCRAMBLER_CTL which doesn't
exist on those platforms.
Only set the flag should the interface be configured to support
more than HDMI 1.4.
Fixes: 1998646129 ("drm/vc4: hdmi: Introduce a scdc_enabled flag")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127134559.292778-1-maxime@cerno.tech
The existing logic was flawed in that it could try reading the
2711 specific registers for HPD on a CM1/3 where the HPD GPIO
hadn't been defined in DT.
Ensure we don't do the 2711 register read on invalid hardware,
and then
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127131754.236074-1-maxime@cerno.tech
In function do_fb_ioctl(), the "arg" is the type of unsigned long,
and in "case FBIOBLANK:" this argument is casted into an int before
passig to fb_blank(). In fb_blank(), the comparision
if (blank > FB_BLANK_POWERDOWN) would be bypass if the original
"arg" is a large number, which is possible because it comes from
the user input. Fix this by adding the check before the function
call.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Yizhuo Zhai <yzhai003@ucr.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202235811.1621017-1-yzhai003@ucr.edu
Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to
enable bitblt and fillrect hardware acceleration in the framebuffer
console. If disabled, such acceleration will not be used, even if it is
supported by the graphics hardware driver.
If you plan to use DRM as your main graphics output system, you should
disable this option since it will prevent compiling in code which isn't
used later on when DRM takes over.
For all other configurations, e.g. if none of your graphic cards support
DRM (yet), DRM isn't available for your architecture, or you can't be
sure that the graphic card in the target system will support DRM, you
most likely want to enable this option.
In the non-accelerated case (e.g. when DRM is used), the inlined
fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the
compiler is able to optimize much unneccesary code away.
In this v3 patch version I additionally changed the GETVYRES() and GETVXRES()
macros to take a pointer to the fbcon_display struct. This fixes the build when
console rotation is enabled and helps the compiler again to optimize out code.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-4-deller@gmx.de
This reverts commit 39aead8373.
Revert the first (of 2) commits which disabled scrolling acceleration in
fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards
because of the performance penalty by doing screen scrolling by software
instead of using the existing graphic card 2D hardware acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de
This reverts commit b3ec8cdf45.
Revert the second (of 2) commits which disabled scrolling acceleration
in fbcon/fbdev. It introduced a regression for fbdev-supported graphic
cards because of the performance penalty by doing screen scrolling by
software instead of using the existing graphic card 2D hardware
acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-2-deller@gmx.de
It appears like nr could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents
of kernel memory from being leaked to userspace via speculative
execution by using array_index_nospec.
Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Fixes: c02a81fba7 ("dma-buf: Add dma-buf heaps framework")
Cc: <stable@vger.kernel.org> # v5.6+
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: added fixes and cc: stable tags]
Link: https://patchwork.freedesktop.org/patch/msgid/20220129150604.3461652-1-jordy@pwning.systems
Bounds checking when parsing init scripts embedded in the BIOS reject
access to the last byte. This causes driver initialization to fail on
Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working
console.
This is probably only seen on OpenFirmware machines like PowerPC Macs
because the BIOS image provided by OF is only the used parts of the ROM,
not a power-of-two blocks read from PCI directly so PCs always have
empty bytes at the end that are never accessed.
Signed-off-by: Nick Lopez <github@glowingmonkey.org>
Fixes: 4d4e9907ff ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org
when acpi=off is provided in bootarg, kernel crash with
[ 1.252739] BUG: kernel NULL pointer dereference, address: 0000000000000018
[ 1.258308] Call Trace:
[ 1.258490] ? acpi_walk_namespace+0x147/0x147
[ 1.258770] acpi_get_devices+0xe4/0x137
[ 1.258921] ? drm_core_init+0xc0/0xc0 [drm]
[ 1.259108] detect_thinkpad_privacy_screen+0x5e/0xa8 [drm]
[ 1.259337] drm_privacy_screen_lookup_init+0xe/0xe85 [drm]
The reason is that acpi_walk_namespace expects acpi related stuff
initialized but in fact it wouldn't when acpi is set to off. In this case
we should honor acpi=off in detect_thinkpad_privacy_screen().
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220123091004.763775-1-ztong0001@gmail.com
In case of a modeset where a mode gets split across multiple CRTCs
in the driver specific implementation (bigjoiner in i915) we wrongly count
the affected CRTCs based on the drm_crtc_mask and indicate the stolen CRTC as
an affected CRTC in atomic_check_only().
This triggers a warning since affected CRTCs doent match requested CRTC.
To fix this in such bigjoiner configurations, we should only
increment affected crtcs if that CRTC is enabled in UAPI not
if it is just used internally in the driver to split the mode.
v3: Add the same uapi crtc_state->enable check in requested
crtc calc (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.11+
Fixes: 919c2299a8 ("drm/i915: Enable bigjoiner")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004115913.23889-1-manasi.d.navare@intel.com
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not removing
leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and parse-event tests
for it.
- No need to setup affinities when starting a workload or attaching to a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf() equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYeytiAAKCRCyPKLppCJ+
JyxZAQDNopdDHXLcUaa2Yp8M97QZQ31APY4vOSkn+AneVuBxvAEAs+BPCyBKWCHA
o45Hit7BzOtb3erHN5XVLTNW3WNBIQM=
=RdC6
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not
removing leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and
parse-event tests for it.
- No need to setup affinities when starting a workload or attaching to
a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf()
equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state
directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Remove redundant err variable
perf test: Add parse-events test for aliases with hyphens
perf test: Add pmu-events test for aliases with hyphens
perf parse-events: Support event alias in form foo-bar-baz
perf evsel: Override attr->sample_period for non-libpfm4 events
perf cpumap: Remove duplicate include in cpumap.h
perf cpumap: Migrate to libperf cpumap api
perf python: Fix cpu_map__item() building
perf script: Fix printing 'phys_addr' failure issue
tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
tools headers UAPI: Sync x86 arch prctl headers with the kernel sources
perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
perf evlist: No need to setup affinities when disabling events for pid targets
perf evlist: No need to setup affinities when enabling events for pid targets
perf stat: No need to setup affinities when starting a workload
perf affinity: Allow passing a NULL arg to affinity__cleanup()
perf probe: Fix ppc64 'perf probe add events failed' case
The latest merge of the tracing tree sorts the mcount table at build time.
But s390 appears to do things differently (like always) and replaces the
sorted table back to the original unsorted one. As the ftrace algorithm
depends on it being sorted, bad things happen when it is not, and s390
experienced those bad things.
Add a new config to tell the boot if the mcount table is sorted or not,
and allow s390 to opt out of it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYezl+RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qs5wAQCO2K1uB+XI4rown8zKLrGxOiFIXChi
Ds5GKJwYlcOnwQEAqKK3mAodmMy6ydbeY1OY1IDdTkOCAd752FDIe1Qozws=
=aF8W
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"Fix s390 breakage from sorting mcount tables.
The latest merge of the tracing tree sorts the mcount table at build
time. But s390 appears to do things differently (like always) and
replaces the sorted table back to the original unsorted one. As the
ftrace algorithm depends on it being sorted, bad things happen when it
is not, and s390 experienced those bad things.
Add a new config to tell the boot if the mcount table is sorted or
not, and allow s390 to opt out of it"
* tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix assuming build time sort works for s390
To speed up the boot process, as mcount_loc needs to be sorted for ftrace
to work properly, sorting it at build time is more efficient than boot up
and can save milliseconds of time. Unfortunately, this change broke s390
as it will modify the mcount_loc location after the sorting takes place
and will put back the unsorted locations. Since the sorting is skipped at
boot up if it is believed that it was sorted at run time, ftrace can crash
as its algorithms are dependent on the list being sorted.
Add a new config BUILDTIME_MCOUNT_SORT that is set when
BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine
if sorting should take place at boot up.
Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/
Fixes: 72b3942a17 ("scripts: ftrace - move the sort-processing in ftrace_init")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage
- Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH
- Fix build errors in certs/Makefile
-----BEGIN PGP SIGNATURE-----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=9xMF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage
- Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH
- Fix build errors in certs/Makefile
* tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty
certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI
Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"
usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-----BEGIN PGP SIGNATURE-----
iQHJBAABCgAzFiEEi8GdvG6xMhdgpu/4sUSA/TofvsgFAmHi+xgVHHl1cnkubm9y
b3ZAZ21haWwuY29tAAoJELFEgP06H77IxdoMAMf3E+L51Ys/4iAiyJQNVoT3aIBC
A8ZVOB9he1OA3o3wBNIRKmICHk+ovnfCWcXTr9fG/Ade2wJz88NAsGPQ1Phywb+s
iGlpySllFN72RT9ZqtJhLEzgoHHOL0CzTW07TN9GJy4gQA2h2G9CTP+OmsQdnVqE
m9Fn3PSlJ5lhzePlKfnln8rGZFgrriJakfEFPC79n/7an4+2Hvkb5rWigo7KQc4Z
9YNqYUcHWZFUgq80adxEb9LlbMXdD+Z/8fCjOrAatuwVkD4RDt6iKD0mFGjHXGL7
MZ9KRS8AfZXawmetk3jjtsV+/QkeS+Deuu7k0FoO0Th2QV7BGSDhsLXAS5By/MOC
nfSyHhnXHzCsBMyVNrJHmNhEZoN29+tRwI84JX9lWcf/OLANcCofnP6f2UIX7tZY
CAZAgVELp+0YQXdybrfzTQ8BT3TinjS/aZtCrYijRendI1GwUXcyl69vdOKqAHuk
5jy8k/xHyp+ZWu6v+PyAAAEGowY++qhL0fmszA==
=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
Return value from perf_event__process_tracing_data() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test which allows us to test parsing an event alias with hyphens.
Since these events typically do not exist on most host systems, add the
alias to the fake pmu.
Function perf_pmu__test_parse_init() has terms added to match known test
aliases.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for aliases with hyphens in the name to ensure that the
pmu-events tables are as expects. There should be no reason why these sort
of aliases would be treated differently, but no harm in checking.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Event aliasing for events whose name in the form foo-bar-baz is not
supported, while foo-bar, foo_bar_baz, and other combinations are, i.e.
two hyphens are not supported.
The HiSilicon D06 platform has events in such form:
$ ./perf list sdir-home-migrate
List of pre-defined events (to be used in -e):
uncore hha:
sdir-home-migrate
[Unit: hisi_sccl,hha]
$ sudo ./perf stat -e sdir-home-migrate
event syntax error: 'sdir-home-migrate'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event>event selector. use 'perf list' to list available events
To support, add an extra PMU event symbol type for "baz", and add a new
rule in the bison file.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.
Before said patch:
perf record -c 10000 -e arm_spe_0// -- sleep 1
Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.
This patch restores the previous behaviour for non-libpfm4 events.
Fixes: ae5dcc8abe (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove all but the first include of stdbool.h from cpumap.h.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117083730.863200-1-lv.ruyi@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Value should be built as an integer.
Switch some uses of perf_cpu_map to use the library API.
Fixes: 6d18804b96 ("perf cpumap: Give CPUs their own type")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf script was failed to print the phys_addr for SPE profiling.
One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR
attribute set, perf script then exits with error.
Now referring to 'addr', use evsel__do_check_stype() to check the type.
Before:
# perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
# perf script -F pid,tid,addr,phys_addr
Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field.
After:
# perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
# perf script -F pid,tid,addr,phys_addr
4064384/4064384 ffff802f921be0d0 2f921be0d0
4064384/4064384 ffff802f921be0d0 2f921be0d0
Reviewed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Yao Jin <jinyao5@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.com
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509
fails to build:
certs/Makefile:77: *** target pattern contains no '%'. Stop.
Due to the typo, $(X509_DEP) contains a colon.
Fix it.
Fixes: b8c96a6b46 ("certs: simplify $(srctree)/ handling and remove config_filename macro")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit cd8c917a56.
Commit 129ab0d2d9 ("kbuild: do not quote string values in
include/config/auto.conf") provided the final solution.
Now reverting the temporary workaround.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As linux/nfc.h userspace compilation was finally fixed by commits
79b69a8370 ("nfc: uapi: use kernel size_t to fix user-space builds")
and 7175f02c4e ("uapi: fix linux/nfc.h userspace compilation errors"),
there is no need to keep the compile-test exception for it in
usr/include/Makefile.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge yet more updates from Andrew Morton:
"This is the post-linux-next queue. Material which was based on or
dependent upon material which was in -next.
69 patches.
Subsystems affected by this patch series: mm (migration and zsmalloc),
sysctl, proc, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits)
mm: hide the FRONTSWAP Kconfig symbol
frontswap: remove support for multiple ops
mm: mark swap_lock and swap_active_head static
frontswap: simplify frontswap_register_ops
frontswap: remove frontswap_test
mm: simplify try_to_unuse
frontswap: remove the frontswap exports
frontswap: simplify frontswap_init
frontswap: remove frontswap_curr_pages
frontswap: remove frontswap_shrink
frontswap: remove frontswap_tmem_exclusive_gets
frontswap: remove frontswap_writethrough
mm: remove cleancache
lib/stackdepot: always do filter_irq_stacks() in stack_depot_save()
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
proc: remove PDE_DATA() completely
fs: proc: store PDE()->data into inode->i_private
zsmalloc: replace get_cpu_var with local_lock
zsmalloc: replace per zpage lock with pool->migrate_lock
locking/rwlocks: introduce write_lock_nested
...
-----BEGIN PGP SIGNATURE-----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=/mdT
-----END PGP SIGNATURE-----
Merge tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- multichannel fixes, addressing additional reconnect and DFS scenarios
- reenabling fscache support (indexing rewrite, metadata caching e.g.)
- send additional version information during NTLMSSP negotiate to
improve debugging
- fix for a mount race
- DFS fixes
- fix for a memory leak for stable
* tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
smb3: send NTLMSSP version information
cifs: Support fscache indexing rewrite
cifs: cifs_ses_mark_for_reconnect should also update reconnect bits
cifs: update tcpStatus during negotiate and sess setup
cifs: make status checks in version independent callers
cifs: remove repeated state change in dfs tree connect
cifs: fix the cifs_reconnect path for DFS
cifs: remove unused variable ses_selected
cifs: protect all accesses to chan_* with chan_lock
cifs: fix the connection state transitions with multichannel
cifs: check reconnects for channels of active tcons too
smb3: add new defines from protocol specification
cifs: serialize all mount attempts
cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs
cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty
cifs: clean up an inconsistent indenting
cifs: free ntlmsspblob allocated in negotiate
- Minor cleanup of ioctl32 cruft
- Clean up open coded inodegc workqueue function calls
-----BEGIN PGP SIGNATURE-----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=EIqW
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"One of the patches removes some dead code from xfs_ioctl32.h and the
other fixes broken workqueue flushing in the inode garbage collector.
- Minor cleanup of ioctl32 cruft
- Clean up open coded inodegc workqueue function calls"
* tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: flush inodegc workqueue tasks before cancel
xfs: remove unused xfs_ioctl32.h declarations
-----BEGIN PGP SIGNATURE-----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=CgMV
-----END PGP SIGNATURE-----
Merge tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull more fscache updates from David Howells:
"A set of fixes and minor updates for the fscache rewrite:
- Fix mishandling of volume collisions (the wait condition is
inverted and so it was only waiting if the volume collision was
already resolved).
- Fix miscalculation of whether there's space available in
cachefiles.
- Make sure a default cache name is set on a cache if the user hasn't
set one by the time they bind the cache.
- Adjust the way the backing inode is presented in tracepoints, add a
tracepoint for mkdir and trace directory lookup.
- Add a tracepoint for failure to set the active file mark.
- Add an explanation of the checks made on the backing filesystem.
- Check that the backing filesystem supports tmpfile.
- Document how the page-release cancellation of the read-skip
optimisation works.
And I've included a change for netfslib:
- Make ops->init_rreq() optional"
* tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Make ops->init_rreq() optional
fscache: Add a comment explaining how page-release optimisation works
cachefiles: Check that the backing filesystem supports tmpfiles
cachefiles: Explain checks in a comment
cachefiles: Trace active-mark failure
cachefiles: Make some tracepoint adjustments
cachefiles: set default tag name if it's unspecified
cachefiles: Calculate the blockshift in terms of bytes, not pages
fscache: Fix the volume collision wait condition
One bug fix, one patch pulled forward from the patches destined for 5.18
and then a patch to make use of that functionality.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmHrDXUACgkQDpNsjXcp
gj6+xwf+LHi3G1hYrG+lhLIcH6EtNlmMhfqnPCaHnON8DqVMvcattg1JhGwUexyi
nFHLS1OsxgETTnxvuR/nkuHDHA9qrTxQ/zerLydTawT0eaeP38spBWsg3Ovz8Vh3
Tq0DfCm8xQmFZIDD9Cxm3gbApoOtyrauO/cvaTMANM5SzvaSjzdV3V1dNuagkgQj
4wzHRfqJZX7cM0I3a4OCklP5pz1ze0Ju41N1E26RYqRWX2MhbnpR4vuOKee2NqPk
q7ZIHsrnd7cL2S1v35Ur59h3VSqdOAwYLWQkvCx8lx2qbms1tU7/LPXLPyRL1Bye
tUThijS5a9RDBTHFoMkZD098HTSwMA==
=19pm
-----END PGP SIGNATURE-----
Merge tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache
Pull more folio updates from Matthew Wilcox:
"Three small folio patches.
One bug fix, one patch pulled forward from the patches destined for
5.18 and then a patch to make use of that functionality"
* tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache:
filemap: Use folio_put_refs() in filemap_free_folio()
mm: Add folio_put_refs()
pagevec: Initialise folio_batch->percpu_pvec_drained
This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYetVgSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfElAQD/OZPx
dceTIXQixYGuHhGI3Il8O5ASYQVIU86gv+jRrgEA/MN4EWj4VsYaocrUdtTCBON1
wJYcC7VUekfNBX6KdeY=
=DcbH
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: nsp_cs: Check of ioremap return value
scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()
scsi: ufs: Modify Tactive time setting conditions
scsi: efct: Remove useless DMA-32 fallback configuration
scsi: message: fusion: mptctl: Use dma_alloc_coherent()
scsi: message: fusion: mptsas: Use dma_alloc_coherent()
scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info()
scsi: message: fusion: mptbase: Use dma_alloc_coherent()
scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory()
scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API
scsi: megaraid: Avoid mismatched storage type sizes
scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
scsi: aic79xx: Remove redundant error variable
scsi: pm80xx: Port reset timeout error handling correction
scsi: mpi3mr: Fix formatting problems in some kernel-doc comments
scsi: mpi3mr: Fix some spelling mistakes
scsi: mpt3sas: Update persistent trigger pages from sysfs interface
scsi: core: Fix scsi_mode_select() interface
scsi: aacraid: Fix spelling of "its"
scsi: qedf: Fix potential dereference of NULL pointer
A single patch in this pull request to fix a compilation error in the
pata_octeon_cf driver (mips architecture), from me.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYetJ7wAKCRDdoc3SxdoY
dg33AP9IAGlP4xgqS9wO/aNi4FcRWS22cq29Rnv7ovseD98ILwD/WYmPqQl4JwF/
h/+tW4nYcQDXg1RVRulgCUmC701u6wA=
=5cLC
-----END PGP SIGNATURE-----
Merge tag 'ata-5.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fix from Damien Le Moal:
"A single patch to fix a compilation error in the pata_octeon_cf driver
(mips architecture), from me"
* tag 'ata-5.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_octeon_cf: fix call to trace_ata_bmdma_stop()
Add device IDs for Raptor Lake to the int340x thermal control
driver (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----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=8J33
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"Add device IDs for Raptor Lake to the int340x thermal control driver
(Srinivas Pandruvada)"
* tag 'thermal-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Add Raptor Lake PCI device id
thermal: int340x: Support Raptor Lake
- Fix a recently introduced endianness-related issue in the ACPI
CPPC library and clean it up on top of that (Rafael Wysocki).
- Add new device IDs for the Raptor Lake SoC to the ACPI DPTF
driver (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----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=rx5C
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull extra ACPI updates from Rafael Wysocki:
"These fix and clean up the ACPI CPPC driver on top of the recent
changes in it merged previously and add some new device IDs to the
ACPI DPTF driver.
Specifics:
- Fix a recently introduced endianness-related issue in the ACPI CPPC
library and clean it up on top of that (Rafael Wysocki)
- Add new device IDs for the Raptor Lake SoC to the ACPI DPTF driver
(Srinivas Pandruvada)"
* tag 'acpi-5.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: DPTF: Support Raptor Lake
ACPI: CPPC: Drop redundant local variable from cpc_read()
ACPI: CPPC: Fix up I/O port access in cpc_read()
- Fix a regression when probing a child device reusing the parent
device's DT node pointer
- Refactor of_parse_phandle*() variants to static inlines
- Drop Enric Balletbo i Serra as a maintainer
- Fix DT schemas with arrays incorrectly encoded as a matrix
- Drop unneeded pinctrl properties from schemas
- Add SPI peripheral schema to SPI based displays
- Clean-up several schema examples
- Clean-up trivial-devices.yaml comments
- Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
F(x)tec, 8devices
-----BEGIN PGP SIGNATURE-----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=ZOqM
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes and cleanups from Rob Herring:
- Fix a regression when probing a child device reusing the parent
device's DT node pointer
- Refactor of_parse_phandle*() variants to static inlines
- Drop Enric Balletbo i Serra as a maintainer
- Fix DT schemas with arrays incorrectly encoded as a matrix
- Drop unneeded pinctrl properties from schemas
- Add SPI peripheral schema to SPI based displays
- Clean-up several schema examples
- Clean-up trivial-devices.yaml comments
- Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
F(x)tec, 8devices
* tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: google,cros-ec: drop Enric Balletbo i Serra from maintainers
dt-bindings: display: bridge: drop Enric Balletbo i Serra from maintainers
of: Check 'of_node_reused' flag on of_match_device()
of: property: define of_property_read_u{8,16,32,64}_array() unconditionally
of: base: make small of_parse_phandle() variants static inline
dt-bindings: mfd: cirrus,madera: Fix 'interrupts' in example
dt-bindings: Fix array schemas encoded as matrices
dt-bindings: Drop unnecessary pinctrl properties
dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry
dt-bindings: mmc: arm,pl18x: Make each example a separate entry
dt-bindings: display: Add SPI peripheral schema to SPI based displays
scripts/dtc: dtx_diff: remove broken example from help text
dt-bindings: trivial-devices: fix double spaces in comments
dt-bindings: trivial-devices: fix swapped comments
dt-bindings: vendor-prefixes: add Wingtech
dt-bindings: vendor-prefixes: add Thundercomm
dt-bindings: vendor-prefixes: add Huawei
dt-bindings: vendor-prefixes: add F(x)tec
dt-bindings: vendor-prefixes: add 8devices
dt-bindings: power: reset: gpio-restart: Correct default priority
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHpmT0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOstggAi1VSpT43oGslQjXNDZacHEARoYQs
b0XpoW7HXicGSGRMWspCmiAPdJyYTsioEACttAmXUMs7brAgHb9n/vzdlcLh1ymL
rQw2YFQlfqqB1Ki1iRhNkWlH9xOECsu28WLng6ylrx51GuT/pzWRt+V3EGUFTxIT
ldW9HgZg2oFJIaLjg2hQVR/8EbBf0QdsAD3KV3tyvhBlXPkyeLOMcGe9onfjZ/NE
JQeW7FtKtP4SsIFt1KrJpDPjtiwFt3bRM0gfgGw7//clvtKIqt1LYXZiq4C3b7f5
tfYiC8lO2vnOoYcfeYEmvybbSsoS/CgSliZB32qkwoVvRMIl82YmxtDD+Q==
=/Mak
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
- a memory leak fix in an error path in pdc_stable (Miaoqian Lin)
- two compiler warning fixes in the TOC code
- added autodetection for currently used console type (serial or graphics)
which inserts console=<type> if it's missing
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYesyJAAKCRD3ErUQojoP
X4/fAQDSAarbWUqr3zWo3UU9iBtaCJwD85nWK44R+SSdWon7yQD/bF9YvLMbGnGR
lp8quJafFpgwUWJ9DV7PCzIroUDLCAo=
=o8u9
-----END PGP SIGNATURE-----
Merge tag 'for-5.17/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc architecture updates from Helge Deller:
"Fixes and enhancements:
- a memory leak fix in an error path in pdc_stable (Miaoqian Lin)
- two compiler warning fixes in the TOC code
- added autodetection for currently used console type (serial or
graphics) which inserts console=<type> if it's missing"
* tag 'for-5.17/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries
parisc: Fix missing prototype for 'toc_intr' warning in toc.c
parisc: Autodetect default output device and set console= kernel parameter
parisc: Use safer strscpy() in setup_cmdline()
parisc: Add visible flag to toc_stack variable
* Support for sv48 paging.
* Hart ID mappings are now sparse, which enables more CPUs to come up on
systems with sparse hart IDs.
* A handful of cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=WKqE
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for sv48 paging
- Hart ID mappings are now sparse, which enables more CPUs to come up
on systems with sparse hart IDs
- A handful of cleanups and fixes
* tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (27 commits)
RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULT
RISC-V: Remove redundant err variable
riscv: dts: sifive unmatched: Add gpio poweroff
riscv: canaan: remove useless select of non-existing config SYSCON
RISC-V: Do not use cpumask data structure for hartid bitmap
RISC-V: Move spinwait booting method to its own config
RISC-V: Move the entire hart selection via lottery to SMP
RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method
RISC-V: Do not print the SBI version during HSM extension boot print
RISC-V: Avoid using per cpu array for ordered booting
riscv: default to CONFIG_RISCV_SBI_V01=n
riscv: fix boolconv.cocci warnings
riscv: Explicit comment about user virtual address space size
riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
riscv: Implement sv48 support
asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
riscv: Allow to dynamically define VA_BITS
riscv: Introduce functions to switch pt_ops
riscv: Split early kasan mapping to prepare sv48 introduction
riscv: Move KASAN mapping next to the kernel mapping
...
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmHqx3oPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YUhIH/i1B4k5UG9iZxnMAEbnqbVL1Glps48Ml2y9z
fsehLUs+a8gjRtPrVjTaXUE6mRaCtUg98yyQicBs04S00/KG0ygvtYjy0pY/vrUf
OU+MqJciz9kRysFRA4VAUgxUFzNs+RNsd8aPcVRnXzJ37uGvEr/YmJ3oLvVJi4zl
FaowBPND3ByYpygJfv93XVKAepkNMCWZHWjOvVQVgYJ0DV6mzZu/nDImDDUYejpo
bbPBykSUDdrfPy0GkScedV2BasRmu7LMbtehKCFvUGwAAIcBR6QWZRo7+SHugmvn
TGurI3RafVxqRzBNyUcwkRjQaPly/9QDxzVcQKACo2TyGIZGzMU=
=8R7Q
-----END PGP SIGNATURE-----
Merge tag 'docs-5.17-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"Three small documentation fixes"
* tag 'docs-5.17-2' of git://git.lwn.net/linux:
Documentation: fix firewire.rst ABI file path error
docs: ftrace: fix ambiguous sentence
docs: staging/tee.rst: fix two typos found while reading
