Test that IPv4 and IPv6 nexthops are correctly marked with offload
indication in response to neighbour events.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver tries to periodically refresh neighbours that are used to
reach nexthops. This is done by periodically calling neigh_event_send().
However, if the neighbour becomes dead, there is nothing we can do to
return it to a connected state and the above function call is basically
a NOP.
This results in the nexthop never being written to the device's
adjacency table and therefore never used to forward packets.
Fix this by dropping our reference from the dead neighbour and
associating the nexthop with a new neigbhour which we will try to
refresh.
Fixes: a7ff87acd9 ("mlxsw: spectrum_router: Implement next-hop routing")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The same hash function and seed are used for both ECMP and LAG hash.
Therefore, when a LAG device is used as a nexthop device as part of an
ECMP group, hash polarization can occur and all the traffic will be
hashed to a single LAG slave.
Fix this by using a different seed for the LAG hash.
Fixes: fa73989f26 ("mlxsw: spectrum: Use a stable ECMP/LAG seed")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tls_sw_do_sendpage needs to return the total number of bytes sent
regardless of how many sk_msgs are allocated. Unfortunately, copied
(the value we return up the stack) is zero'd before each new sk_msg
is allocated so we only return the copied size of the last sk_msg used.
The caller (splice, etc.) of sendpage will then believe only part
of its data was sent and send the missing chunks again. However,
because the data actually was sent the receiver will get multiple
copies of the same data.
To reproduce this do multiple sendfile calls with a length close to
the max record size. This will in turn call splice/sendpage, sendpage
may use multiple sk_msg in this case and then returns the incorrect
number of bytes. This will cause splice to resend creating duplicate
data on the receiver. Andre created a C program that can easily
generate this case so we will push a similar selftest for this to
bpf-next shortly.
The fix is to _not_ zero the copied field so that the total sent
bytes is returned.
Reported-by: Steinar H. Gunderson <steinar+kernel@gunderson.no>
Reported-by: Andre Tomt <andre@tomt.net>
Tested-by: Andre Tomt <andre@tomt.net>
Fixes: d829e9c411 ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get the ingress interface and increment ICMP counters based on that
instead of skb->dev when the the dev is a VRF device.
This is a follow up on the following message:
https://www.spinics.net/lists/netdev/msg560268.html
v2: Avoid changing skb->dev since it has unintended effect for local
delivery (David Ahern).
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case that a process is constrained by taskset(1) (i.e.
sched_setaffinity(2)) to a subset of available cpus, and all of those are
subsequently offlined, the scheduler will set tsk->cpus_allowed to
the current value of task_cs(tsk)->effective_cpus.
This is done via a call to do_set_cpus_allowed() in the context of
cpuset_cpus_allowed_fallback() made by the scheduler when this case is
detected. This is the only call made to cpuset_cpus_allowed_fallback()
in the latest mainline kernel.
However, this is not sane behavior.
I will demonstrate this on a system running the latest upstream kernel
with the following initial configuration:
# grep -i cpu /proc/$$/status
Cpus_allowed: ffffffff,fffffff
Cpus_allowed_list: 0-63
(Where cpus 32-63 are provided via smt.)
If we limit our current shell process to cpu2 only and then offline it
and reonline it:
# taskset -p 4 $$
pid 2272's current affinity mask: ffffffffffffffff
pid 2272's new affinity mask: 4
# echo off > /sys/devices/system/cpu/cpu2/online
# dmesg | tail -3
[ 2195.866089] process 2272 (bash) no longer affine to cpu2
[ 2195.872700] IRQ 114: no longer affine to CPU2
[ 2195.879128] smpboot: CPU 2 is now offline
# echo on > /sys/devices/system/cpu/cpu2/online
# dmesg | tail -1
[ 2617.043572] smpboot: Booting Node 0 Processor 2 APIC 0x4
We see that our current process now has an affinity mask containing
every cpu available on the system _except_ the one we originally
constrained it to:
# grep -i cpu /proc/$$/status
Cpus_allowed: ffffffff,fffffffb
Cpus_allowed_list: 0-1,3-63
This is not sane behavior, as the scheduler can now not only place the
process on previously forbidden cpus, it can't even schedule it on
the cpu it was originally constrained to!
Other cases result in even more exotic affinity masks. Take for instance
a process with an affinity mask containing only cpus provided by smt at
the moment that smt is toggled, in a configuration such as the following:
# taskset -p f000000000 $$
# grep -i cpu /proc/$$/status
Cpus_allowed: 000000f0,00000000
Cpus_allowed_list: 36-39
A double toggle of smt results in the following behavior:
# echo off > /sys/devices/system/cpu/smt/control
# echo on > /sys/devices/system/cpu/smt/control
# grep -i cpus /proc/$$/status
Cpus_allowed: ffffff00,ffffffff
Cpus_allowed_list: 0-31,40-63
This is even less sane than the previous case, as the new affinity mask
excludes all smt-provided cpus with ids less than those that were
previously in the affinity mask, as well as those that were actually in
the mask.
With this patch applied, both of these cases end in the following state:
# grep -i cpu /proc/$$/status
Cpus_allowed: ffffffff,ffffffff
Cpus_allowed_list: 0-63
The original policy is discarded. Though not ideal, it is the simplest way
to restore sanity to this fallback case without reinventing the cpuset
wheel that rolls down the kernel just fine in cgroup v2. A user who wishes
for the previous affinity mask to be restored in this fallback case can use
that mechanism instead.
This patch modifies scheduler behavior by instead resetting the mask to
task_cs(tsk)->cpus_allowed by default, and cpu_possible mask in legacy
mode. I tested the cases above on both modes.
Note that the scheduler uses this fallback mechanism if and only if
_every_ other valid avenue has been traveled, and it is the last resort
before calling BUG().
Suggested-by: Waiman Long <longman@redhat.com>
Suggested-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Acked-by: Phil Auld <pauld@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Using ethtool, users can specify a classification action matching on the
full vlan tag, which includes the DEI bit (also previously called CFI).
However, when converting the ethool_flow_spec to a flow_rule, we use
dissector keys to represent the matching patterns.
Since the vlan dissector key doesn't include the DEI bit, this
information was silently discarded when translating the ethtool
flow spec in to a flow_rule.
This commit adds the DEI bit into the vlan dissector key, and allows
propagating the information to the driver when parsing the ethtool flow
spec.
Fixes: eca4205f9e ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator")
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a spelling typo in rds.txt
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
err must be nonzero in order to reach text_poke(), which caused kgdb to
fail to set breakpoints:
(gdb) break __x64_sys_sync
Breakpoint 1 at 0xffffffff81288910: file ../fs/sync.c, line 124.
(gdb) c
Continuing.
Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0xffffffff81288910
Command aborted.
Fixes: 86a2205712 ("x86/kgdb: Avoid redundant comparison of patched code")
Signed-off-by: Matt Mullins <mmullins@fb.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nadav Amit <namit@vmware.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190531194755.6320-1-mmullins@fb.com
Randy reported that selecting MPLS_ROUTING without PROC_FS breaks
the build, because since commit c1a9d65954 ("mpls: fix af_mpls
dependencies"), MPLS_ROUTING selects PROC_SYSCTL, but Kconfig's select
doesn't recursively handle dependencies.
Change the select into a dependency.
Fixes: c1a9d65954 ("mpls: fix af_mpls dependencies")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In selinux_sb_eat_lsm_opts(), 'arg' is allocated by kmemdup_nul(). It
returns NULL when fails. So 'arg' should be checked. And 'mnt_opts'
should be freed when error.
Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Fixes: 99dbbb593f ("selinux: rewrite selinux_sb_eat_lsm_opts()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=UXan
-----END PGP SIGNATURE-----
Merge tag 'media/v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a debug warning for satellite tuning at dvb core was producing too
much noise
- a regression at hfi_parser on Venus driver
* tag 'media/v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: venus: hfi_parser: fix a regression in parser
media: dvb: warning about dvb frequency limits produces too much noise
In selinux_add_mnt_opt(), 'val' is allocated by kmemdup_nul(). It returns
NULL when fails. So 'val' should be checked. And 'mnt_opts' should be
freed when error.
Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Fixes: 757cbe597f ("LSM: new method: ->sb_add_mnt_opt()")
Cc: <stable@vger.kernel.org>
[PM: fixed some indenting problems]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since commit 3d65b6bbc0 ("arm64: tlbi: Set MAX_TLBI_OPS to
PTRS_PER_PTE"), we resort to per-ASID invalidation when attempting to
perform more than PTRS_PER_PTE invalidation instructions in a single
call to __flush_tlb_range(). Whilst this is beneficial, the mmu_gather
code does not ensure that the end address of the range is rounded-up
to the stride when freeing intermediate page tables in pXX_free_tlb(),
which defeats our range checking.
Align the bounds passed into __flush_tlb_range().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We should not call 'ndo_bpf()' or 'dev_put()' with NULL argument.
Fixes: c9b47cc1fa ("xsk: fix bug when trying to use both copy and zero-copy on one queue id")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The cloned sk should not carry its parent-listener's sk_bpf_storage.
This patch fixes it by setting it back to NULL.
Fixes: 6ac99e8f23 ("bpf: Introduce bpf sk local storage")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With v5.2-rc1, The ftrace functions_graph tracer locks up whenever it is
enabled on arm64.
Since commit 0ea415390c ("clocksource/arm_arch_timer: Use
arch_timer_read_counter to access stable counters") a function pointer
is consistently used to read the counter instead of potentially
referencing an inlinable function.
The graph tracers relies on accessing the timer counters to compute the
time spent in functions which causes the lockup when attempting to trace
these code paths.
Annotate the arm arch timer counter accessors as notrace.
Fixes: 0ea415390c ("clocksource/arm_arch_timer: Use
arch_timer_read_counter to access stable counters")
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The devm_gpiod_request_gpiod() call will add "-gpios" to
any passed connection ID before looking it up.
I do not think the reset GPIO on this platform is named
"reset-gpios-gpios" but rather "reset-gpios" in the device
tree, so fix this up so that we get a proper reset GPIO
handle.
Also drop the inclusion of the legacy GPIO header.
Fixes: 0e8ce93bdc ("i2c: pca-platform: add devicetree awareness")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
We've moved the override and firmware EDID (simply "override EDID" from
now on) handling to the low level drm_do_get_edid() function in order to
transparently use the override throughout the stack. The idea is that
you get the override EDID via the ->get_modes() hook.
Unfortunately, there are scenarios where the DDC probe in drm_get_edid()
called via ->get_modes() fails, although the preceding ->detect()
succeeds.
In the case reported by Paul Wise, the ->detect() hook,
intel_crt_detect(), relies on hotplug detect, bypassing the DDC. In the
case reported by Ilpo Järvinen, there is no ->detect() hook, which is
interpreted as connected. The subsequent DDC probe reached via
->get_modes() fails, and we don't even look at the override EDID,
resulting in no modes being added.
Because drm_get_edid() is used via ->detect() all over the place, we
can't trivially remove the DDC probe, as it leads to override EDID
effectively meaning connector forcing. The goal is that connector
forcing and override EDID remain orthogonal.
Generally, the underlying problem here is the conflation of ->detect()
and ->get_modes() via drm_get_edid(). The former should just detect, and
the latter should just get the modes, typically via reading the EDID. As
long as drm_get_edid() is used in ->detect(), it needs to retain the DDC
probe. Or such users need to have a separate DDC probe step first.
The EDID caching between ->detect() and ->get_modes() done by some
drivers is a further complication that prevents us from making
drm_do_get_edid() adapt to the two cases.
Work around the regression by falling back to a separate attempt at
getting the override EDID at drm_helper_probe_single_connector_modes()
level. With a working DDC and override EDID, it'll never be called; the
override EDID will come via ->get_modes(). There will still be a failing
DDC probe attempt in the cases that require the fallback.
v2:
- Call drm_connector_update_edid_property (Paul)
- Update commit message about EDID caching (Daniel)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107583
Reported-by: Paul Wise <pabs3@bonedaddy.net>
Cc: Paul Wise <pabs3@bonedaddy.net>
References: http://mid.mail-archive.com/alpine.DEB.2.20.1905262211270.24390@whs-18.cs.helsinki.fi
Reported-by: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi>
Cc: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
References: 15f080f08d ("drm/edid: respect connector force for drm_get_edid ddc probe")
Fixes: 53fd40a90f ("drm: handle override and firmware EDID at drm_do_get_edid() level")
Cc: <stable@vger.kernel.org> # v4.15+ 56a2b7f2a3 drm/edid: abstract override/firmware EDID retrieval
Cc: <stable@vger.kernel.org> # v4.15+
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Tested-by: Paul Wise <pabs3@bonedaddy.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610093054.28445-1-jani.nikula@intel.com
The Acorn i2c driver (for RiscPC) triggers the "i2c adapter has no name"
warning in the I2C core driver, resulting in the RTC being inaccessible.
Fix this.
Fixes: 2236baa75f ("i2c: Sanity checks on adapter registration")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
This is a GCC only option, which warns about ABI changes within GCC, so
unconditionally adding it breaks Clang with tons of:
warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option]
and link time failures:
ld.lld: error: undefined symbol: __efistub___stack_chk_guard
>>> referenced by arm-stub.c:73
(/home/nathan/cbl/linux/drivers/firmware/efi/libstub/arm-stub.c:73)
>>> arm-stub.stub.o:(__efistub_install_memreserve_table)
in archive ./drivers/firmware/efi/libstub/lib.a
These failures come from the lack of -fno-stack-protector, which is
added via cc-option in drivers/firmware/efi/libstub/Makefile. When an
unknown flag is added to KBUILD_CFLAGS, clang will noisily warn that it
is ignoring the option like above, unlike gcc, who will just error.
$ echo "int main() { return 0; }" > tmp.c
$ clang -Wno-psabi tmp.c; echo $?
warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option]
1 warning generated.
0
$ gcc -Wsometimes-uninitialized tmp.c; echo $?
gcc: error: unrecognized command line option
‘-Wsometimes-uninitialized’; did you mean ‘-Wmaybe-uninitialized’?
1
For cc-option to work properly with clang and behave like gcc, -Werror
is needed, which was done in commit c3f0d0bc5b ("kbuild, LLVMLinux:
Add -Werror to cc-option to support clang").
$ clang -Werror -Wno-psabi tmp.c; echo $?
error: unknown warning option '-Wno-psabi'
[-Werror,-Wunknown-warning-option]
1
As a consequence of this, when an unknown flag is unconditionally added
to KBUILD_CFLAGS, it will cause cc-option to always fail and those flags
will never get added:
$ clang -Werror -Wno-psabi -fno-stack-protector tmp.c; echo $?
error: unknown warning option '-Wno-psabi'
[-Werror,-Wunknown-warning-option]
1
This can be seen when compiling the whole kernel as some warnings that
are normally disabled (see below) show up. The full list of flags
missing from drivers/firmware/efi/libstub are the following (gathered
from diffing .arm64-stub.o.cmd):
-fno-delete-null-pointer-checks
-Wno-address-of-packed-member
-Wframe-larger-than=2048
-Wno-unused-const-variable
-fno-strict-overflow
-fno-merge-all-constants
-fno-stack-check
-Werror=date-time
-Werror=incompatible-pointer-types
-ffreestanding
-fno-stack-protector
Use cc-disable-warning so that it gets disabled for GCC and does nothing
for Clang.
Fixes: ebcc5928c5 ("arm64: Silence gcc warnings about arch ABI drift")
Link: https://github.com/ClangBuiltLinux/linux/issues/511
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Abstract the debugfs override and the firmware EDID retrieval
function. We'll be needing it in the follow-up. No functional changes.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Tested-by: Paul Wise <pabs3@bonedaddy.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607110513.12072-1-jani.nikula@intel.com
When a switch event, such as tablet mode/laptop mode or docked/undocked,
wakes a device make sure that the value of the swich is reported.
Without when a device is put in tablet mode from laptop mode when it is
suspended or vice versa the device will wake up but mode will be
incorrect.
Tested by suspending a device in laptop mode and putting it in tablet
mode, the device resumes and is in tablet mode. When suspending the
device in tablet mode and putting it in laptop mode the device resumes
and is in laptop mode.
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Commit 78f3ac76d9 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).
The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.
Cc: João Paulo Rechi Vita <jprvita@endlessm.com>
Fixes: 78f3ac76d9 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Booting with kernel parameter "rdt=cmt,mbmtotal,memlocal,l3cat,mba" and
executing "mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl" results in
a NULL pointer dereference on systems which do not have local MBM support
enabled..
BUG: kernel NULL pointer dereference, address: 0000000000000020
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 722 Comm: kworker/0:3 Not tainted 5.2.0-0.rc3.git0.1.el7_UNSUPPORTED.x86_64 #2
Workqueue: events mbm_handle_overflow
RIP: 0010:mbm_handle_overflow+0x150/0x2b0
Only enter the bandwith update loop if the system has local MBM enabled.
Fixes: de73f38f76 ("x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth")
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190610171544.13474-1-prarit@redhat.com
When a new control group is created __init_one_rdt_domain() walks all
the other closids to calculate the sets of used and unused bits.
If it discovers a pseudo_locksetup group, it breaks out of the loop. This
means any later closid doesn't get its used bits added to used_b. These
bits will then get set in unused_b, and added to the new control group's
configuration, even if they were marked as exclusive for a later closid.
When encountering a pseudo_locksetup group, we should continue. This is
because "a resource group enters 'pseudo-locked' mode after the schemata is
written while the resource group is in 'pseudo-locksetup' mode." When we
find a pseudo_locksetup group, its configuration is expected to be
overwritten, we can skip it.
Fixes: dfe9674b04 ("x86/intel_rdt: Enable entering of pseudo-locksetup mode")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H Peter Avin <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190603172531.178830-1-james.morse@arm.com
Apparently, some Qualcomm arm64 platforms which appear to expose their
SMMU global register space are still, in fact, using a hypervisor to
mediate it by trapping and emulating register accesses. Sadly, some
deployed versions of said trapping code have bugs wherein they go
horribly wrong for stores using r31 (i.e. XZR/WZR) as the source
register.
While this can be mitigated for GCC today by tweaking the constraints
for the implementation of writel_relaxed(), to avoid any potential
arms race with future compilers more aggressively optimising register
allocation, the simple way is to just remove all the problematic
constant zeros. For the write-only TLB operations, the actual value is
irrelevant anyway and any old nearby variable will provide a suitable
GPR to encode. The one point at which we really do need a zero to clear
a context bank happens before any of the TLB maintenance where crashes
have been reported, so is apparently not a problem... :/
Reported-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Gen10 added an additional NOA_WRITE register (high bits) and we forgot
to whitelist it for userspace.
Fixes: 95690a02fb ("drm/i915/perf: enable perf support on CNL")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190601225845.12600-1-lionel.g.landwerlin@intel.com
(cherry picked from commit bf210f6c9e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Our SDVO audio support is pretty bogus. We can't push audio over the
SDVO bus, so trying to enable audio in the SDVO control register doesn't
do anything. In fact it looks like the SDVO encoder will always mix in
the audio coming over HDA, and there's no (at least documented) way to
disable that from our side. So HDMI audio does work currently on gen4
but only by luck really. On gen3 it got broken by the referenced commit.
And what has always been missing on every platform is the ELD.
To pass the ELD to the audio driver we need to write it to magic buffer
in the SDVO encoder hardware which then gets pulled out via HDA in the
other end. Ie. pretty much the same thing we had for native HDMI before
we started to just pass the ELD between the drivers. This sort of
explains why we even have that silly hardware buffer with native HDMI.
$ cat /proc/asound/card0/eld#1.0
-monitor_present 0
-eld_valid 0
+monitor_present 1
+eld_valid 1
+monitor_name LG TV
+connection_type HDMI
+...
This also fixes our state readout since we can now query the SDVO
encoder about the state of the "ELD valid" and "presence detect"
bits. As mentioned those don't actually control whether audio
gets sent over the HDMI cable, but it's the best we can do. And with
the state checker appeased we can re-enable HDMI audio for gen3.
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: zardam@gmail.com
Tested-by: zardam@gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976
Fixes: de44e256b9 ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit dc49a56bd4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We forgot to set .has_alpha=true for the A+CCS formats when the code
started to consult .has_alpha. This manifests as A+CCS being treated
as X+CCS which means no per-pixel alpha blending. Fix the format
list appropriately.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Heinrich Fink <heinrich.fink@daqri.com>
Reported-by: Heinrich Fink <heinrich.fink@daqri.com>
Tested-by: Heinrich Fink <heinrich.fink@daqri.com>
Fixes: b208152556 ("drm/i915: Add plane alpha blending support, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603142500.25680-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 38f300410f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
While loading the DMC firmware we were double checking the headers made
sense, but in no place we checked that we were actually reading memory
we were supposed to. This could be wrong in case the firmware file is
truncated or malformed.
Before this patch:
# ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin
-rw-r--r-- 1 root root 25716 Feb 1 12:26 icl_dmc_ver1_07.bin
# truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin
# modprobe i915
# dmesg| grep -i dmc
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7)
i.e. it loads random data. Now it fails like below:
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting.
i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management.
i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
Before reading any part of the firmware file, validate the input first.
Fixes: eb805623d8 ("drm/i915/skl: Add support to load SKL CSR firmware.")
Cc: stable@vger.kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605235535.17791-1-lucas.demarchi@intel.com
(cherry picked from commit bc7b488b1d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prior to this commit we fail to init the DSI panel on the GPD MicroPC:
https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/
The problem is intel_dsi_vbt_init() failing with the following error:
*ERROR* Burst mode freq is less than computed
The pclk in the VBT panel modeline is 70000, together with 24 bpp and
4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000.
But the target_burst_mode_freq in the VBT is 418000.
This commit works around this problem by adding an intel_fuzzy_clock_check
when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to
bitrate when that checks succeeds, fixing the panel not working.
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524174028.21659-2-hdegoede@redhat.com
(cherry picked from commit 2c1c552526)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pull ptrace fixes from Eric Biederman:
"This is just two very minor fixes:
- prevent ptrace from reading unitialized kernel memory found twice
by syzkaller
- restore a missing smp_rmb in ptrace_may_access and add comment tp
it so it is not removed by accident again.
Apologies for being a little slow about getting this to you, I am
still figuring out how to develop with a little baby in the house"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: restore smp_rmb() in __ptrace_may_access()
signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"One tiny fix for ARM64 where we could allocate the SWIOTLB twice"
* 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
xen/swiotlb: don't initialize swiotlb twice on arm64
- Fix mdev device create/remove paths to provide initialized device for
parent driver create callback and correct ordering of device removal
from bus prior to initiating removal by parent. Also resolve races
between parent removal and device create/remove paths. (Parav Pandit)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=CXX0
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
"Fix mdev device create/remove paths to provide initialized device for
parent driver create callback and correct ordering of device removal
from bus prior to initiating removal by parent.
Also resolve races between parent removal and device create/remove
paths (all from Parav Pandit)"
* tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfio:
vfio/mdev: Synchronize device create/remove with parent removal
vfio/mdev: Avoid creating sysfs remove file on stale device removal
vfio/mdev: Improve the create/remove sequence
-----BEGIN PGP SIGNATURE-----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=UByh
-----END PGP SIGNATURE-----
Merge tag 'for-5.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One regression fix to TRIM ioctl.
The range cannot be used as its meaning can be confusing regarding
physical and logical addresses. This confusion in code led to
potential corruptions when the range overlapped data.
The original patch made it to several stable kernels and was promptly
reverted, the version for master branch is different due to additional
changes but the change is effectively the same"
* tag 'for-5.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Always trim all unallocated space in btrfs_trim_free_extents
These strings may come from untrusted sources (e.g. file xattrs) so they
need to be properly escaped.
Reproducer:
# setenforce 0
# touch /tmp/test
# setfattr -n security.selinux -v 'kuřecí řízek' /tmp/test
# runcon system_u:system_r:sshd_t:s0 cat /tmp/test
(look at the generated AVCs)
Actual result:
type=AVC [...] trawcon=kuřecí řízek
Expected result:
type=AVC [...] trawcon=6B75C5996563C3AD20C599C3AD7A656B
Fixes: fede148324 ("selinux: log invalid contexts in AVCs")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Restore the read memory barrier in __ptrace_may_access() that was deleted
a couple years ago. Also add comments on this barrier and the one it pairs
with to explain why they're there (as far as I understand).
Fixes: bfedb58925 ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks")
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Stefano Brivio says:
====================
Don't assume linear buffers in error handlers for VXLAN and GENEVE
Guillaume noticed the same issue fixed by commit 26fc181e6c ("fou, fou6:
do not assume linear skbs") for fou and fou6 is also present in VXLAN and
GENEVE error handlers: we can't assume linear buffers there, we need to
use pskb_may_pull() instead.
====================
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit a07966447f ("geneve: ICMP error lookup handler") I wrongly
assumed buffers from icmp_socket_deliver() would be linear. This is not
the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear
data.
Eric fixed this same issue for fou and fou6 in commits 26fc181e6c
("fou, fou6: do not assume linear skbs") and 5355ed6388 ("fou, fou6:
avoid uninit-value in gue_err() and gue6_err()").
Use pskb_may_pull() instead of checking skb->len, and take into account
the fact we later access the GENEVE header with udp_hdr(), so we also
need to sum skb_transport_header() here.
Reported-by: Guillaume Nault <gnault@redhat.com>
Fixes: a07966447f ("geneve: ICMP error lookup handler")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit c3a43b9fec ("vxlan: ICMP error lookup handler") I wrongly
assumed buffers from icmp_socket_deliver() would be linear. This is not
the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear
data.
Eric fixed this same issue for fou and fou6 in commits 26fc181e6c
("fou, fou6: do not assume linear skbs") and 5355ed6388 ("fou, fou6:
avoid uninit-value in gue_err() and gue6_err()").
Use pskb_may_pull() instead of checking skb->len, and take into account
the fact we later access the VXLAN header with udp_hdr(), so we also
need to sum skb_transport_header() here.
Reported-by: Guillaume Nault <gnault@redhat.com>
Fixes: c3a43b9fec ("vxlan: ICMP error lookup handler")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The below patch fixes an incorrect zerocopy refcnt increment when
appending with MSG_MORE to an existing zerocopy udp skb.
send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt 1
send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt still 1 (bar frags)
But it missed that zerocopy need not be passed at the first send. The
right test whether the uarg is newly allocated and thus has extra
refcnt 1 is not !skb, but !skb_zcopy.
send(.., MSG_MORE); // <no uarg>
send(.., MSG_ZEROCOPY); // refcnt 1
Fixes: 100f6d8e09 ("net: correct zerocopy refcnt with udp MSG_MORE")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[What]
readptr read always returns zero, since most likely
these blocks are either power or clock gated.
[How]
fetch rptr after amdgpu_ring_alloc() which informs
the power management code that the block is about to be
used and hence the gating is turned off.
Signed-off-by: Louis Li <Ching-shih.Li@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
In RV32, udelay would delay the wrong cycle. When it shifts right
"UDELAY_SHIFT" bits, it either delays 0 cycle or 1 cycle. It only works
correctly in RV64. Because the 'ucycles' always needs to be 64 bits
variable.
Signed-off-by: Nick Hu <nickhu@andestech.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: fixed minor spelling error]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Commit bf0102a0fd ("riscv: call pm_power_off from machine_halt /
machine_power_off") removed the export of pm_power_off, but it is used by
several modules:
ERROR: "pm_power_off" [drivers/mfd/rk808.ko] undefined!
ERROR: "pm_power_off" [drivers/mfd/max8907.ko] undefined!
ERROR: "pm_power_off" [drivers/mfd/axp20x.ko] undefined!
ERROR: "pm_power_off" [drivers/char/ipmi/ipmi_poweroff.ko] undefined!
Signed-off-by: Andreas Schwab <schwab@suse.de>
Fixes: bf0102a0fd ("riscv: call pm_power_off from machine_halt / machine_power_off")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
