This patch makes use of functions added in the previous patch. It
registers ldisc during init of main speakup module and unregisters it
during exit. It also removes the code to register ldisc every time a
synth module is loaded. This way we only register the ldisc once when
main speakup module is loaded. Since main speakup module is required by
all synth modules, it is only unloaded when all synths have been
unloaded. Therefore we unregister the ldisc once, when all speakup
related references to the ldisc have returned. In unlikely scenario of
something outside speakup using the ldisc, the ldisc refcount check in
tty_unregister_ldisc will ensure that it is not unregistered while in
use.
The function to register ldisc doesn't cause speakup init function to
fail. That is different from current behaviour where failure to register
ldisc results in failure to load the specific synth module. This is
because speakup module is also required by those synths which don't use
tty and ldisc. We don't want to prevent those modules from loading when
ldisc fails to register. The synth modules will correctly fail when
trying to set N_SPEAKUP to tty, if ldisc registrationi had failed.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the above two functions and makes them available to
main.c where they will be called during init and exit functions of
main speakup module. Following patch will make use of them.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Speakup opens tty using tty_open_by_driver. When closing, it calls
tty_ldisc_release but doesn't close and remove the tty itself. As a
result, that tty cannot be opened from user space. This patch calls
tty_release_struct which ensures that tty is safely removed and freed
up. It also calls tty_ldisc_release, so speakup doesn't need to call it.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The helper function ser_to_dev does not need to be in global scope, so
make it static.
Cleans up sparse warning:
"warning: symbol 'ser_to_dev' was not declared. Should it be static?"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Okash Khawaja <okash.khawaja@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces new module parameter, dev, which takes a string
representing the device that the external synth is connected to, e.g.
ttyS0, ttyUSB0 etc. This is then used to communicate with the synth.
That way, speakup can support more than ttyS*. As of this patch, it
only supports ttyS*, ttyUSB* and selected synths for lp*. dev parameter
is only available for tty-migrated synths.
Users will either use dev or ser as both serve same purpose. This patch
maintains backward compatility by allowing ser to be specified. When
both are specified, whichever is non-default, i.e. not ttyS0, is used.
If both are non-default then dev is used.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds functionality to validate and convert either a device
name or 'ser' memmber of synth into dev_t. Subsequent patch in this set
will call it to convert user-specified device into device number. For
device name, this patch does some basic sanity checks on the string
passed in. It currently supports ttyS*, ttyUSB* and, for selected
synths, lp*.
The patch also introduces a string member variable named 'dev_name' to
struct spk_synth. 'dev_name' represents the device name - ttyUSB0 etc -
which needs conversion to dev_t.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
synths[] array caches currently loaded synths. synth_add checks
synths[] before adding a new one. It however ignores the result of
do_synth_init. So when do_synth_init fails, the failed synth is still
cached. Since, as a result module loading fails too, synth_remove -
which is responsible for removing the cached synth - is never called.
Next time the failing synth is added again it succeeds because
synth_add finds it cached inside synths[].
This patch fixes this by caching a synth only after do_synth_init
succeeds.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes checkpatch warnings about adding a blank line after
variable declaration.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Migration of bns was missed out in the patch
https://patchwork.kernel.org/patch/9727725/. This patch does it by
updating relevant function pointers, just like in the patch linked
above.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I have aligned argument with parenthesis, so checkpatch no check also.
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed the checkpatch.pl warning:
WARNING: line over 80 characters
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a space around logical symbol '|' to wipe out checkpatch check
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed checkpatch warning by adding a blank line after declare
expression
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In spk_ttyio_release we read tty's index but never do anything with it.
The patch removes this dead code.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should check the flush_buffer method of a tty for null before
invoking it. Some drivers such as usbserial don't implement
flush_buffer. This will be required for upcoming patches where we expand
spk_ttyio to support more than just ttyS*.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to the spk_ttyio.c file which fixes up the indent error
reported by the checkpatch.pl tool.
Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On most of the common arches char is signed so it can't ever == 0xff.
Let's fix this by making it a u8.
Fixes: 6b9ad1c742 ("staging: speakup: add send_xchar, tiocmset and input functionality for tty")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the issue where TTY-migrated synths would take a while
to shut up after hitting numpad enter key. When calling synth_flush,
even though XOFF character is sent as high priority, data buffered in
TTY layer is still sent to the synth. This patch flushes that buffered
data when synth_flush is called.
It also tries to ensure that hardware flow control is enabled, by
setting CRTSCTS using tty's termios.
Reported-by: John Covici <covici@ccs.covici.com>
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch simply uses the changes introduced in previous patches and migrates
apollo, ltlk, audptr, decext, spkout and dectlk. Migrations are straightforward
function pointer updates.
Signed-off by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds further TTY-based functionality, specifically implementation
of send_xchar and tiocmset methods, and input. send_xchar and tiocmset
methods simply delegate to corresponding TTY operations.
For input, it implements the receive_buf2 callback in tty_ldisc_ops of
speakup's ldisc. If a synth defines read_buff_add method then receive_buf2
simply delegates to that and returns.
For spk_ttyio_in, the data is passed from receive_buf2 thread to
spk_ttyio_in thread through spk_ldisc_data structure. It has following
members:
- char buf: represents data received
- struct semaphore sem: used to signal to spk_ttyio_in thread that data
is available to be read without having to busy wait
- bool buf_free: this is used in comination with mb() calls to syncronise
the two threads over buf
receive_buf2 only writes to buf if buf_free is true. The check for buf_free
and writing to buf are separated by mb() to ensure that spk_ttyio_in has read
buf before receive_buf2 writes to it. After writing, it ups the semaphore to
signal to spk_ttyio_in that there is now data to read.
spk_ttyio_in waits for data to read by downing the semaphore. Thus when
signalled by receive_buf2 thread above, it reads from buf and sets buf_free
to true. These two operations are separated by mb() to ensure that
receive_buf2 thread finds buf_free to be true only after buf has been read.
After that spk_ttyio_in calls tty_schedule_flip for subsequent data to come
in through receive_buf2.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This changes the above five synths to TTY-based comms. They were chosen as a
first pass because their serial comms are straightforward, i.e. they don't use
serial input and don't do internal port knocking.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds spk_ttyio.c file. It contains a set of functions which implement
those methods in spk_synth struct which relate to sending bytes out using
serial comms. Implementations in this file perform the same function but
using TTY subsystem instead. Currently synths access serial ports, directly
poking standard ISA ports by trying to steal them from serial driver. Some ISA
cards actually need this way of doing it, but most other synthesizers don't,
and can actually work by using the proper TTY subsystem through a new N_SPEAKUP
line discipline. So this adds the methods for drivers to switch to accessing
serial ports through the TTY subsystem, whenever appropriate.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch message:
WARNING: line over 80 characters
Change "bit mask" for "bitmask" to have a line shorter than 80 characters.
Signed-off-by: Michael Mera <dev@michaelmera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl "WARNING: Block comments should align the * on each line"
Signed-off-by: Tiago Koji Castro Shibata <tiago.shibata@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves functions which take input from external synth, into struct
spk_io_ops. The calling code then uses serial implementation of those methods
through spk_io_ops. That way we can add a parallel TTY-based implementation and
simply replace serial with TTY. That is what the next patch in this series does.
speakup_decext.c has get_last_char function which reads the most recent
available character from the synth. This patch changes that by defining
read_buff_add callback method of spk_syth and letting that update the last_char
global character read from the synth. read_buff_add is called from ISR, so
there is a possibility for last_char to be stale. Therefore it is marked as
volatile. It also pulls a repeated get_index implementation into synth.c, to
be used as a utility function.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQIVAwUAWPiW6vSw1s6N8H32AQLOrw/+NTqGf7bjq+64YKS6NfR0XDgE+wNJltGO
ck7zJW3NHIg76RNu8s0I9xg5aVmwizz3Z5DGROZquaolnezux4tQihZ3AFyxIzLc
+Y3WHYagcML7yFfjl/WznCLRD5EW3yPln4lCvQO0nW/xICRYeRI057JaIbi2Dtek
BhcXt3c4AjXDLdYJkgtHV3p2R2mt8hcdFdWqqx6s7JaIThZNRGNzxAgtbcB9k5IW
HVG9ZEIL73VBYWHrYivzjHYF5rBnNCPt87eOwDQeTOSkhv8te+u9k+bH8vxZw1T0
XUtDrLBndKiuVo2GUfLkkF8LItx3Q9eLCJYy0joaIliyPqTEsPx9KjQ+Af0cxS9s
ZPCZ5SYf96stKmDeL5xaMfrAmeyVHJ4lc4JTOqdzbIT8blsOSfYO/03p0ALShSDv
/RQLaKGlf8Bjoy8PwKFcXb4sIDufcd/U1Av/EMFXxOfgN/u2JUkGKq6EaIM5B68L
fHPje+aR9VNELPmPjwNOWtmN4I79EH3EItQf7zv0KG+UeKhcHLx/EAcSJ3ZRKEkH
Lathg7pPOEJGArPiVO79TZzBG01ADn1aiwv65XObMzNZ+54xI/mN/Y1DNF/kL5jU
XzvNzEjFt8mwMIZGVNdAt4+pDyMfIZGZSyUkSRKFnaQZMIvQrfQIU9RLBYLX5eOx
+/p0VkIwDpg=
=lbS7
-----END PGP SIGNATURE-----
Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull hw lockdown support from David Howells:
"Annotation of module parameters that configure hardware resources
including ioports, iomem addresses, irq lines and dma channels.
This allows a future patch to prohibit the use of such module
parameters to prevent that hardware from being abused to gain access
to the running kernel image as part of locking the kernel down under
UEFI secure boot conditions.
Annotations are made by changing:
module_param(n, t, p)
module_param_named(n, v, t, p)
module_param_array(n, t, m, p)
to:
module_param_hw(n, t, hwtype, p)
module_param_hw_named(n, v, t, hwtype, p)
module_param_hw_array(n, t, hwtype, m, p)
where the module parameter refers to a hardware setting
hwtype specifies the type of the resource being configured. This can
be one of:
ioport Module parameter configures an I/O port
iomem Module parameter configures an I/O mem address
ioport_or_iomem Module parameter could be either (runtime set)
irq Module parameter configures an I/O port
dma Module parameter configures a DMA channel
dma_addr Module parameter configures a DMA buffer address
other Module parameter configures some other value
Note that the hwtype is compile checked, but not currently stored (the
lockdown code probably won't require it). It is, however, there for
future use.
A bonus is that the hwtype can also be used for grepping.
The intention is for the kernel to ignore or reject attempts to set
annotated module parameters if lockdown is enabled. This applies to
options passed on the boot command line, passed to insmod/modprobe or
direct twiddling in /sys/module/ parameter files.
The module initialisation then needs to handle the parameter not being
set, by (1) giving an error, (2) probing for a value or (3) using a
reasonable default.
What I can't do is just reject a module out of hand because it may
take a hardware setting in the module parameters. Some important
modules, some ipmi stuff for instance, both probe for hardware and
allow hardware to be manually specified; if the driver is aborts with
any error, you don't get any ipmi hardware.
Further, trying to do this entirely in the module initialisation code
doesn't protect against sysfs twiddling.
[!] Note that in and of itself, this series of patches should have no
effect on the the size of the kernel or code execution - that is
left to a patch in the next series to effect. It does mark
annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
an already existing field"
* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
Annotate hardware config module parameters in sound/pci/
Annotate hardware config module parameters in sound/oss/
Annotate hardware config module parameters in sound/isa/
Annotate hardware config module parameters in sound/drivers/
Annotate hardware config module parameters in fs/pstore/
Annotate hardware config module parameters in drivers/watchdog/
Annotate hardware config module parameters in drivers/video/
Annotate hardware config module parameters in drivers/tty/
Annotate hardware config module parameters in drivers/staging/vme/
Annotate hardware config module parameters in drivers/staging/speakup/
Annotate hardware config module parameters in drivers/staging/media/
Annotate hardware config module parameters in drivers/scsi/
Annotate hardware config module parameters in drivers/pcmcia/
Annotate hardware config module parameters in drivers/pci/hotplug/
Annotate hardware config module parameters in drivers/parport/
Annotate hardware config module parameters in drivers/net/wireless/
Annotate hardware config module parameters in drivers/net/wan/
Annotate hardware config module parameters in drivers/net/irda/
Annotate hardware config module parameters in drivers/net/hamradio/
Annotate hardware config module parameters in drivers/net/ethernet/
...
This adds two methods to spk_synth struct: send_xchar and tiocmset, and
creates serial implementation for each of them. It takes existing code
in apollo, audptr and spkout which already fits the behaviour of
send_xchar and tiocmset. In follow-up patches there will be TTY-based
implementations of these methods. Then migrating the synths to TTY will
include repointing these methods to their TTY implementations
Rest of the changes simply make use of serial implementation of these two
functions.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image. Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.
To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify. The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.
Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.
This patch annotates drivers in drivers/staging/speakup/.
Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: speakup@linux-speakup.org
cc: devel@driverdev.osuosl.org
Fixed coding style for null comparisons in speakup driver to be more
consistant with the rest of the kernel coding style.
Replaced 'x != NULL' with 'x' and 'x = NULL' with '!x'.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete tabs and add spaces to align the code to fix the
checkpatch issue: "CHECK: Alignment should match open parenthesis".
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
speakup_allocate used GFP_ATOMIC for allocations
even while during initialization due to it's use
in notifier call.
Pass GFP_ flags as well to speakup_allocate depending
on the context it is called in.
Signed-off-by: Pranay Kr. Srivastava <pranjas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following sparse warning:
symbol 'spk_serial_out' was not declared. Should it be static?
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed the checkpatch.pl issues like:
CHECK: spaces preferred around that '&' (ctx:VxV)
CHECK: spaces preferred around that '|' (ctx:VxV)
CHECK: spaces preferred around that '-' (ctx:VxV)
CHECK: spaces preferred around that '+' (ctx:VxV)
etc.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moved logical OR operator to previous line to fix the following
checkpatch issue:
CHECK: Logical continuations should be on the previous line.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checks reported by checkpatch.pl
for braces {} should be used on all arms of this statement.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed coding style for null comparisons in speakup driver to be more
consistant with the rest of the kernel coding style.
Replaced 'x != NULL' with 'x' and 'x = NULL' with '!x'.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moved logical operator to previous line to fix the following
checkpatch issue:
CHECK: Logical continuations should be on the previous line.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the unnecessary allocation of
current foreground vc during initialization.
This initialization is already handled in the loop
that follows it for all available virtual consoles.
Signed-off-by: Pranay Kr. Srivastava <pranjas@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch makes spk_set_key_info return -EINVAL
in case of failure instead of returning 4 different
values for the type of error that occurred.
Print the offending values instead as debug message.
Signed-off-by: Pranay Kr. Srivastava <pranjas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This gathers emitting the caps start string, space, spelled letter
string, space, and caps stop string, into one printf, to avoid
sending to the synth a space character alone, which the synth would
then pronounce.
Similarly, emit space along control-letter and letter spelling.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Zahari Yurukov <zahari.yurukov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves spk_synth_immediate and spk_serial_synth_probe functions into
serialio.c. These functions do outgoing serial comms. The move is a step
towards collecting all serial comms in serialio.c. This also renames
spk_synth_immediate to spk_serial_synth_immediate.
Code inside those functions has not been changed. Along the way, this patch
also fixes a couple of spots which were calling spk_synth_immediate directly,
so that the calls now happen via the spk_syth struct.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Indentation should always use tabs and never spaces.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch fixes the warnings reported by checkpatch.pl
for please use a blank line after function/struct/union/enum
declarations.
Add a blank line after enum and struct declarations.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33590c1852 ("speakup: Support spelling unicode characters")
mistakenly passed unicode characters to IS_CHAR(), which only
supports latin1. Let's assume non-latin1 is lower case, like is done
in spell_word().
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Chris Brannon <chris@the-brannons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves call to spk_stop_serial_interrupt() function out of synth_release()
and into release() method of specific spk_synth instances. This is because
the spk_stop_serial_interrupt() call is specific to current serial i/o
implementation. Moving it into each synth's release() method gives the
decision of calling spk_stop_serial_interrupt() to that synth.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds spk_io_ops struct which contain those methods whose job is to
communicate with synth device. Currently, all comms with external synth
device use raw serial i/o. The idea is to group all methods which do the
actual communication with external device into this new struct. Then migrating
a serial-based synth over to an alternative to raw serial i/o will mean
swapping serial spk_io_ops instance with the io_ops instance of the new
method, making the migration simpler.
At the moment, this struct only contains one method, synth_out but more will
be added in future when migrating synths which require input functionality.
Also at the moment, synth_out method has one implementation which uses
serial i/o. Plan is to add an alternative.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These two functions are always called from a context where spk_synth instance
is available. They also use the spk_synth instance but instead of taking it
as an argument, they rely on a global spk_synth instance inside synth.c which
points to the same synth as the one being passed in as argument.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This supports spelling unicode characters by just passing them to
the speech synthesis in direct mode.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Okash Khawaja