mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
4949 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
8b83369ddc |
RISC-V Patches for the 5.12 Merge Window
I have a handful of new RISC-V related patches for this merge window: * A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. * Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. * NUMA support for RISC-V, which involves making the arm64 code generic. * Support for kasan on the vmalloc region. * A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. * Support for allocating ASIDs. * Preliminary support for kernels larger than 128MiB. * Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmA4hXATHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYifryD/0SfXGOfj93Cxq7I7AYhhzCN7lJ5jvv iEQScTlPqU9nfvYodo4EDq0fp+5LIPpTL/XBHtqVjzv0FqRNa28Ea0K7kO8HuXc4 BaUd0m/DqyB4Gfgm4qjc5bDneQ1ZYxVXprYERWNQ5Fj+tdWhaQGOW64N/TVodjjj NgJtTqbIAcjJqjUtttM8TZN5U1TgwLo+KCqw3iYW12lV1YKBBuvrwvSdD6jnFdIQ AzG/wRGZhxLoFxgBB/NEsZxDoSd6ztiwxLhS9lX4okZVsryyIdOE70Q/MflfiTlU xE+AdxQXTMUiiqYSmHeDD6PDb57GT/K3hnjI1yP+lIZpbInsi29JKow1qjyYjfHl 9cSSKYCIXHL7jKU6pgt34G1O5N5+fgqHQhNbfKvlrQ2UPlfs/tWdKHpFIP/z9Jlr 0vCAou7NSEB9zZGqzO63uBLXoN8yfL8FT3uRnnRvoRpfpex5dQX2QqPLQ7327D7N GUG31nd1PHTJPdxJ1cI4SO24PqPpWDWY9uaea+0jv7ivGClVadZPco/S3ZKloguT lazYUvyA4oRrSAyln785Rd8vg4CinqTxMtIyZbRMbNkgzVQARi9a8rjvu4n9qms2 2wlXDFi8nR8B4ih5n79dSiiLM9ay9GJDxMcf9VxIxSAYZV2fJALnpK6gV2fzRBUe +k/uv8BIsFmlwQ== =CutX -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ... |
||
![]() |
e9a2e48e87 |
drivers/base/memory: don't store phys_device in memory blocks
No need to store the value for each and every memory block, as we can easily query the value at runtime. Reshuffle the members to optimize the memory layout. Also, let's clarify what the interface once was used for and why it's legacy nowadays. "phys_device" was used on s390x in older versions of lsmem[2]/chmem[3], back when they were still part of s390x-tools. They were later replaced by the variants in linux-utils. For example, RHEL6 and RHEL7 contain lsmem/chmem from s390-utils. RHEL8 switched to versions from util-linux on s390x [4]. "phys_device" was added with sysfs support for memory hotplug in commit |
||
![]() |
1adf8b468f |
mm/memory_hotplug: rename all existing 'memhp' into 'mhp'
This renames all 'memhp' instances to 'mhp' except for memhp_default_state for being a kernel command line option. This is just a clean up and should not cause a functional change. Let's make it consistent rater than mixing the two prefixes. In preparation for more users of the 'mhp' terminology. Link: https://lkml.kernel.org/r/1611554093-27316-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
4c48faba5b |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "A few small subsystems and some of MM. 172 patches. Subsystems affected by this patch series: hexagon, scripts, ntfs, ocfs2, vfs, and mm (slab-generic, slab, slub, debug, pagecache, swap, memcg, pagemap, mprotect, mremap, page-reporting, vmalloc, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, mempolicy, oom-kill, hugetlbfs, and migration)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (172 commits) mm/migrate: remove unneeded semicolons hugetlbfs: remove unneeded return value of hugetlb_vmtruncate() hugetlbfs: fix some comment typos hugetlbfs: correct some obsolete comments about inode i_mutex hugetlbfs: make hugepage size conversion more readable hugetlbfs: remove meaningless variable avoid_reserve hugetlbfs: correct obsolete function name in hugetlbfs_read_iter() hugetlbfs: use helper macro default_hstate in init_hugetlbfs_fs hugetlbfs: remove useless BUG_ON(!inode) in hugetlbfs_setattr() hugetlbfs: remove special hugetlbfs_set_page_dirty() mm/hugetlb: change hugetlb_reserve_pages() to type bool mm, oom: fix a comment in dump_task() mm/mempolicy: use helper range_in_vma() in queue_pages_test_walk() numa balancing: migrate on fault among multiple bound nodes mm, compaction: make fast_isolate_freepages() stay within zone mm/compaction: fix misbehaviors of fast_find_migrateblock() mm/compaction: correct deferral logic for proactive compaction mm/compaction: remove duplicated VM_BUG_ON_PAGE !PageLocked mm/compaction: remove rcu_read_lock during page compaction z3fold: simplify the zhdr initialization code in init_z3fold_page() ... |
||
![]() |
b603894248 |
mm: memcg: add swapcache stat for memcg v2
This patch adds swapcache stat for the cgroup v2. The swapcache represents the memory that is accounted against both the memory and the swap limit of the cgroup. The main motivation behind exposing the swapcache stat is for enabling users to gracefully migrate from cgroup v1's memsw counter to cgroup v2's memory and swap counters. Cgroup v1's memsw limit allows users to limit the memory+swap usage of a workload but without control on the exact proportion of memory and swap. Cgroup v2 provides separate limits for memory and swap which enables more control on the exact usage of memory and swap individually for the workload. With some little subtleties, the v1's memsw limit can be switched with the sum of the v2's memory and swap limits. However the alternative for memsw usage is not yet available in cgroup v2. Exposing per-cgroup swapcache stat enables that alternative. Adding the memory usage and swap usage and subtracting the swapcache will approximate the memsw usage. This will help in the transparent migration of the workloads depending on memsw usage and limit to v2' memory and swap counters. The reasons these applications are still interested in this approximate memsw usage are: (1) these applications are not really interested in two separate memory and swap usage metrics. A single usage metric is more simple to use and reason about for them. (2) The memsw usage metric hides the underlying system's swap setup from the applications. Applications with multiple instances running in a datacenter with heterogeneous systems (some have swap and some don't) will keep seeing a consistent view of their usage. [akpm@linux-foundation.org: fix CONFIG_SWAP=n build] Link: https://lkml.kernel.org/r/20210108155813.2914586-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
380780e718 |
mm: memcontrol: convert NR_FILE_PMDMAPPED account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_FILE_PMDMAPPED account to pages. This patch is
consistent with
|
||
![]() |
a1528e21f8 |
mm: memcontrol: convert NR_SHMEM_PMDMAPPED account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_SHMEM_PMDMAPPED account to pages. This patch is
consistent with
|
||
![]() |
57b2847d3c |
mm: memcontrol: convert NR_SHMEM_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_SHMEM_THPS account to pages. This patch is
consistent with
|
||
![]() |
bf9ecead53 |
mm: memcontrol: convert NR_FILE_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with if hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_FILE_THPS account to pages. This patch is consistent
with
|
||
![]() |
69473e5de8 |
mm: memcontrol: convert NR_ANON_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_ANON_THPS account to pages. This patch is consistent
with
|
||
![]() |
e229b429bb |
Char/Misc driver patches for 5.12-rc1
Here is the large set of char/misc/whatever driver subsystem updates for 5.12-rc1. Over time it seems like this tree is collecting more and more tiny driver subsystems in one place, making it easier for those maintainers, which is why this is getting larger. Included in here are: - coresight driver updates - habannalabs driver updates - virtual acrn driver addition (proper acks from the x86 maintainers) - broadcom misc driver addition - speakup driver updates - soundwire driver updates - fpga driver updates - amba driver updates - mei driver updates - vfio driver updates - greybus driver updates - nvmeem driver updates - phy driver updates - mhi driver updates - interconnect driver udpates - fsl-mc bus driver updates - random driver fix - some small misc driver updates (rtsx, pvpanic, etc.) All of these have been in linux-next for a while, with the only reported issue being a merge conflict in include/linux/mod_devicetable.h that you will hit in your tree due to the dfl_device_id addition from the fpga subsystem in here. The resolution should be simple. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZf9w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yk3xgCcCEN+pCJTum+uAzSNH3YKs/onaDgAnRSVwOUw tNW6n1JhXLYl9f5JdhvS =MOHs -----END PGP SIGNATURE----- Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc/whatever driver subsystem updates for 5.12-rc1. Over time it seems like this tree is collecting more and more tiny driver subsystems in one place, making it easier for those maintainers, which is why this is getting larger. Included in here are: - coresight driver updates - habannalabs driver updates - virtual acrn driver addition (proper acks from the x86 maintainers) - broadcom misc driver addition - speakup driver updates - soundwire driver updates - fpga driver updates - amba driver updates - mei driver updates - vfio driver updates - greybus driver updates - nvmeem driver updates - phy driver updates - mhi driver updates - interconnect driver udpates - fsl-mc bus driver updates - random driver fix - some small misc driver updates (rtsx, pvpanic, etc.) All of these have been in linux-next for a while, with the only reported issue being a merge conflict due to the dfl_device_id addition from the fpga subsystem in here" * tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits) spmi: spmi-pmic-arb: Fix hw_irq overflow Documentation: coresight: Add PID tracing description coresight: etm-perf: Support PID tracing for kernel at EL2 coresight: etm-perf: Clarify comment on perf options ACRN: update MAINTAINERS: mailing list is subscribers-only regmap: sdw-mbq: use MODULE_LICENSE("GPL") regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ regmap: sdw: use _no_pm functions in regmap_read/write soundwire: intel: fix possible crash when no device is detected MAINTAINERS: replace my with email with replacements mhi: Fix double dma free uapi: map_to_7segment: Update example in documentation uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue firewire: replace tricky statement by two simple ones vme: make remove callback return void firmware: google: make coreboot driver's remove callback return void firmware: xilinx: Use explicit values for all enum values sample/acrn: Introduce a sample of HSM ioctl interface usage virt: acrn: Introduce an interface for Service VM to control vCPU ... |
||
![]() |
7ac1161c27 |
Driver core / debugfs update for 5.12-rc1
Here is the "big" driver core and debugfs update for 5.12-rc1 This set of driver core patches caused a bunch of problems in linux-next for the past few weeks, when Saravana tried to set fw_devlink=on as the default functionality. This caused a number of systems to stop booting, and lots of bugs were fixed in this area for almost all of the reported systems, but this option is not ready to be turned on just yet for the default operation based on this testing, so I've reverted that change at the very end so we don't have to worry about regressions in 5.12. We will try to turn this on for 5.13 if testing goes better over the next few months. Other than the fixes caused by the fw_devlink testing in here, there's not much more: - debugfs fixes for invalid input into debugfs_lookup() - kerneldoc cleanups - warn message if platform drivers return an error on their remove callback (a futile effort, but good to catch). All of these have been in linux-next for a while now, and the regressions have gone away with the revert of the fw_devlink change. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZhzA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylS2wCfU28FxDWNwcWhPFVfRT8Mb3OxZ50An1sR4lNR t5Ie4aztMUjVJhI9bq6g =3NSB -----END PGP SIGNATURE----- Merge tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / debugfs update from Greg KH: "Here is the "big" driver core and debugfs update for 5.12-rc1 This set of driver core patches caused a bunch of problems in linux-next for the past few weeks, when Saravana tried to set fw_devlink=on as the default functionality. This caused a number of systems to stop booting, and lots of bugs were fixed in this area for almost all of the reported systems, but this option is not ready to be turned on just yet for the default operation based on this testing, so I've reverted that change at the very end so we don't have to worry about regressions in 5.12 We will try to turn this on for 5.13 if testing goes better over the next few months. Other than the fixes caused by the fw_devlink testing in here, there's not much more: - debugfs fixes for invalid input into debugfs_lookup() - kerneldoc cleanups - warn message if platform drivers return an error on their remove callback (a futile effort, but good to catch). All of these have been in linux-next for a while now, and the regressions have gone away with the revert of the fw_devlink change" * tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits) Revert "driver core: Set fw_devlink=on by default" of: property: fw_devlink: Ignore interrupts property for some configs debugfs: do not attempt to create a new file before the filesystem is initalized debugfs: be more robust at handling improper input in debugfs_lookup() driver core: auxiliary bus: Fix calling stage for auxiliary bus init of: irq: Fix the return value for of_irq_parse_one() stub of: irq: make a stub for of_irq_parse_one() clk: Mark fwnodes when their clock provider is added/removed PM: domains: Mark fwnodes when their powerdomain is added/removed irqdomain: Mark fwnodes when their irqdomain is added/removed driver core: fw_devlink: Handle suppliers that don't use driver core of: property: Add fw_devlink support for optional properties driver core: Add fw_devlink.strict kernel param of: property: Don't add links to absent suppliers driver core: fw_devlink: Detect supplier devices that will never be added driver core: platform: Emit a warning if a remove callback returned non-zero of: property: Fix fw_devlink handling of interrupts/interrupts-extended gpiolib: Don't probe gpio_device if it's not the primary device device.h: Remove bogus "the" in kerneldoc gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default ... |
||
![]() |
7d6beb71da |
idmapped-mounts-v5.12
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
|
||
![]() |
a99163e9e7 |
Devicetree updates for v5.12:
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host fdtoverlay - Add kbuild support to build DT overlays (%.dtbo) - Drop NULLifying match table in of_match_device(). In preparation for this, there are several driver cleanups to use (of_)?device_get_match_data(). - Drop pointless wrappers from DT struct device API - Convert USB binding schemas to use graph schema and remove old plain text graph binding doc - Convert spi-nor and v3d GPU bindings to DT schema - Tree wide schema fixes for if/then schemas, array size constraints, and undocumented compatible strings in examples - Handle 'no-map' correctly for already reserved memblock regions -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmAz1GEQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw55/D/955O2f5Gjp7bXvdoSucZtks/lqlC/eIAAw An5pjBL+o1urXsvafEMYemwmnwq/U4vy0aJRoAK1+MiI4masb56ET0KN5LsOudki b3M/O16RqGF31+blWyoxseZnZh6KsKzIRoE5XAtbr/QAnpdI0/5BgGoWSWYtDk2v LddL650/BieyvzdnFTLWCMAxd6DW0P9SI+8N3E+XlxAWCYQrLCqVELHbkrxAGCuN CggHIIiNf2K7z4UopVsGjnUwML9YRHXc9wOpF1c4CBrLu9TfDvdQ4OnNcnxcl/Sp E2FTHG0jSVm3VJRBbk4e68uvt3HrJJWsYnMtu2QTweGC/GbeUr9LJ0MIbSwp+rsL FEqCMFWOniq27eJBk6jHckaoBl93AHQlIGdJR/pFAi9Ijt32tUdVG5kqD/Tl+xKm njPcjVjWilr2ssfZ4tUggzPp2fjrau88ZS8qLja31vElzvULeA67KjEtG0RZAtwg ywfATiCaT096pR9v2VYuL/5NNnZFxHx3hWsOH1rcsyPk0BLguU3dkrAn28XBVQFd cOPfR3T/wsT0wHDht2aXPSM0hBiejFmvLhebGuJN9lqG+Pc1f87xiCT3pM7wymtJ iqTMrQ7dUgjQgU91PjatdB17tlnGHe0hh8AiuhQoPgOprpRKszG+rBFJLG3yRnl7 QmLZnQTIhw== =9V4A -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host fdtoverlay - Add kbuild support to build DT overlays (%.dtbo) - Drop NULLifying match table in of_match_device(). In preparation for this, there are several driver cleanups to use (of_)?device_get_match_data(). - Drop pointless wrappers from DT struct device API - Convert USB binding schemas to use graph schema and remove old plain text graph binding doc - Convert spi-nor and v3d GPU bindings to DT schema - Tree wide schema fixes for if/then schemas, array size constraints, and undocumented compatible strings in examples - Handle 'no-map' correctly for already reserved memblock regions * tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) driver core: platform: Drop of_device_node_put() wrapper of: Remove of_dev_{get,put}() dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt dt-bindings: can: rcar_canfd: Group tuples in pin control properties dt-bindings: power: renesas,apmu: Group tuples in cpus properties dt-bindings: mtd: spi-nor: Convert to DT schema format dt-bindings: Use portable sort for version cmp dt-bindings: ethernet-controller: fix fixed-link specification dt-bindings: irqchip: Add node name to PRUSS INTC dt-bindings: interconnect: Fix the expected number of cells dt-bindings: Fix errors in 'if' schemas dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required dt-bindings: Fix undocumented compatible strings in examples kbuild: Add support to build overlays (%.dtbo) scripts: dtc: Remove the unused fdtdump.c file scripts: dtc: Build fdtoverlay tool scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9 scripts: dtc: Fetch fdtoverlay.c from external DTC project dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings dt-bindings: iio: dac: Fix AD5686 references ... |
||
![]() |
05a6fb94a6 |
regmap: Update for v5.12
Just one simple code style improvement this time, no features. There is an addition to add a new SoundWire regmap type but that should be coming via the SoundWire tree as the support for the underlying bus features was only added this cycle. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAq2RQACgkQJNaLcl1U h9Dgmgf+KXNfzSmDSP3ysyfA3CS07NKAOh2WpmKLuKNq0/b4b0Z28YNy1Fm47C+a MwgcyTitzu4cSsRa2jxdqdZ4q+W8rKlQHpgw0tLcu9sq34Ky856rOCHWOXqYb0M2 yFiJvS+8koTxsMe4bXr2SGO1J2MomXei7Ki6ewHEHMpZvMBwN6Ew3520QEqCbLy4 slp21fPnM+uQP9b5o/cNbvPvJQsLf4aU9EOFTxJJfplLXxNege4P4fa+wX2GQeGm Ent7njQHT1l27PY9KHpWSCg8INit/iEEzYJ9XzuXv6682WxvYtDMC/CYmmH7rnKu ccklGJdhgd1y71DNC953noemybis0g== =INU0 -----END PGP SIGNATURE----- Merge tag 'regmap-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap update from Mark Brown: "Just one simple code style improvement this time, no features. There is an addition to add a new SoundWire regmap type but that should be coming via the SoundWire tree as the support for the underlying bus features was only added this cycle" * tag 'regmap-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Assign boolean values to a bool variable |
||
![]() |
10e2ec8ede |
sound updates for 5.12
A relatively calm release at this time, and no massive code changes are found in the stats, while a wide range of code refactoring and cleanup have been done. Note that this update includes the tree-wide trivial changes for dropping the return value from ISA remove callbacks, too. Below lists up some highlight: * ALSA Core: - Support for the software jack injection via debugfs - Fixes for sync_stop PCM operations * HD-audio and USB-audio: - A few usual HD-audio device quirks - Updates for Tegra HD-audio - More quirks for Pioneer and other USB-audio devices - Stricter state checks at USB-audio disconnection * ASoC: - Continued code refactoring, cleanup and fixes in ASoC core API - A KUnit testsuite for the topology code - Lots of ASoC Intel driver Realtek codec updates, quirk additions and fixes - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers * Others: - Drop return value from ISA driver remove callback - Cleanup with DIV_ROUND_UP() macro - FireWire updates, HDSP output loopback support -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmAvhXoOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE9XGA/+MmRBSMipHpZBj6AB2mxbsam2dbPHuycKz1Dd 7W4Rx9QdQcCF2BQ909HKSaE76mTrxkaYc3Ubn8uyfeKz7tB9YpqY5HfIiWRz8iyU FJK/INbkeunLhS61wjKbb8x+pP5M2ZXBTGSRkgVROCgMq4osM+J17c/5wSPE5BoG BGTXUk8LcDE+Iq/6bt2OrXgEBhHCXw7eB/wRWw5v0sIc2cnrexXYUZmHaRj1L3Dd ukpteFEmemOdbowitV+GPSlsnrCD6zselYWms/MLvwLMvTqT4W2SRfsGF5VvGKJC AJsHTWQ5JRKfLt2LJkDs3ymHrKdhnDCWjCUAFNEXd7IRG0Qsk/S+wXsyl3oEhgeQ ND9RoE5pSGG/2Y3Zvt3OevAuVenzQW04/2hFIoAyQg5s/DSom8lNtAsmXkc5dWNI GZJHnvPrdKgzZ0lI9TAbG0v48lnyiQB2sD0FAatWpv3NHcRt0u3fowZgc6Bb3JHK 7cv3upNa1CY7mDSYiT0k3sIHJMrCdoWTPSiewEOxrmLFM1r5O5gHX3dpXhSfh5WJ MI1a93N7sK6WHm6KpeNcHnjrIbP14vOjatOHN+0stuFhLcOGygDX/L0Lu07+15aJ Fxicp23RRwNsb57JcTZTw/+nZhrndSeG3eHYZG2QvQJCv6Ph1tEJ+WAM+tlj85GT feGP0jg= =QgvS -----END PGP SIGNATURE----- Merge tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "A relatively calm release at this time, and no massive code changes are found in the stats, while a wide range of code refactoring and cleanup have been done. Note that this update includes the tree-wide trivial changes for dropping the return value from ISA remove callbacks, too. Below lists up some highlight: ALSA Core: - Support for the software jack injection via debugfs - Fixes for sync_stop PCM operations HD-audio and USB-audio: - A few usual HD-audio device quirks - Updates for Tegra HD-audio - More quirks for Pioneer and other USB-audio devices - Stricter state checks at USB-audio disconnection ASoC: - Continued code refactoring, cleanup and fixes in ASoC core API - A KUnit testsuite for the topology code - Lots of ASoC Intel driver Realtek codec updates, quirk additions and fixes - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers Others: - Drop return value from ISA driver remove callback - Cleanup with DIV_ROUND_UP() macro - FireWire updates, HDSP output loopback support" * tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (322 commits) ALSA: hda: intel-dsp-config: add Alder Lake support ASoC: soc-pcm: fix hw param limits calculation for multi-DAI ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet ASoC: soc-pcm: fix hwparams min/max init for dpcm ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10 ALSA: hda: Add another CometLake-H PCI ID ASoC: soc-pcm: add soc_pcm_hw_update_format() ASoC: soc-pcm: add soc_pcm_hw_update_chan() ASoC: soc-pcm: add soc_pcm_hw_update_rate() ASoC: wm_adsp: Remove unused control callback structure ASoC: SOF: relax ABI checks and avoid unnecessary warnings ASoC: codecs: lpass-tx-macro: add dapm widgets and route ASoC: codecs: lpass-tx-macro: add support for lpass tx macro ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec ASoC: codecs: lpass-rx-macro: add iir widgets ASoC: codecs: lpass-rx-macro: add dapm widgets and route ... |
||
![]() |
de16175788 |
media updates for v5.12-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmAtJ+IACgkQCF8+vY7k 4RX8eBAAhTzVFopTBMAW2+FjBTtUGwn+LnrIG9O1HrFp4yjTfe/MnZWXkVRZXjqo cYZehdab0j8636aLTs86Y6mEMHGPdm6V0hQhgvXoy7FqQqLq52K1bpXL+4a0lNYx HE8OLbOvSM49RlP9ZU978NuUzfWLCW+dGlXuGxdJDU/fmbKdaSjvelRjjfNFhBo3 ENK2LXVnebvtttjq4uSQ5LjeJEBBsIldK947/lvu7zJnnfDlXXdtrsuonkWvRp+s 8M1+AQ0F/edKX1atXSCZZqLNhUNaswHWc6lMmIL8qGvMZjZffWi4KwfcB0XXvrAW IJYfaLQ9kvEaFaSLZ3E5dCPO5CQLUkR4YOmSSUdK16fpyb1WzVjWsKPUjxsk5IeB IitjX5KkP5T+uA8pmzQE9dX2Do7no9A/765f2uqpaQxYbze1IT+6qWMisLrlguZe NV10Fah2dSehmqqfnnIjDE40rP3iff6xKheTeLzF1e4j8JiNDPCRI8z1i8M2OJ1e jIEC4Pq4/mGmn+InJOzxPloel1CnCL+d0bU/wrAhEyg0Ss+M95/+KgK6LCEzgyei /+2II2tABxtanO8mxp4jts3jPduqVuV9EEpWquzf9bPqFy5mBFD3NbOJNn/5ZVlx /DhvjRxiEedQihQ9Pt0OQxiJm6InopaeTihAvMQrMH3nLBsF2/Y= =/wKL -----END PGP SIGNATURE----- Merge tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - some core fixes in VB2 mem2mem support - some improvements and cleanups in V4L2 async kAPI - newer controls in V4L2 API for H-264 and HEVC codecs - allegro-dvt driver was promoted from staging - new i2c sendor drivers: imx334, ov5648, ov8865 - new automobile camera module: rdacm21 - ipu3 cio2 driver started gained support for some ACPI BIOSes - new ATSC frontend: MaxLinear mxl692 VSB tuner/demod - the SMIA/CCS driver gained more support for CSS standard - several driver fixes, updates and improvements * tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits) media: v4l: async: Fix kerneldoc documentation for async functions media: i2c: max9271: Add MODULE_* macros media: i2c: Kconfig: Make MAX9271 a module media: imx334: 'ret' is uninitialized, should have been PTR_ERR() media: i2c: Add imx334 camera sensor driver media: dt-bindings: media: Add bindings for imx334 media: ov8856: Configure sensor for GRBG Bayer for all modes media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control media: ov5675: fix vflip/hflip control media: ipu3-cio2: Build bridge only if ACPI is enabled media: Remove the legacy v4l2-clk API media: ov6650: Use the generic clock framework media: mt9m111: Use the generic clock framework media: ov9640: Use the generic clock framework media: pxa_camera: Drop the v4l2-clk clock register media: mach-pxa: Register the camera sensor fixed-rate clock media: i2c: imx258: get clock from device properties and enable it via runtime PM media: i2c: imx258: simplify getting state container media: i2c: imx258: add support for binding via device tree media: dt-bindings: media: imx258: add bindings for IMX258 sensor ... |
||
![]() |
2671fe5e1d |
- added support for Nintendo N64
- added support for Realtek RTL83XX SoCs - kaslr support for Loongson64 - first steps to get rid of set_fs() - DMA runtime coherent/non-coherent selection cleanup - cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmAvmm8aHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHCbwQ//aCn2l/GuXvKFuGkbTMSW tqrnN4WNVpqK96BHlbS1CLzBj1Qzf9znXq4SBuK2ga3Gks/WOrG9vcOhARX3k5C3 dWi5TQzCKChjKmGxUij3mmIxE41L3vpZ2TOKCVVG8M+/0rMsWClNXfU/Bc9B4n4Y VhZsd3KEjI+SezWT6h1Hw4bmhq2OPTH4CzZMA6Dpq3gZjmNBj1z5SMtLM0XA60dL jkXYxYeMcPEWOoX69z2Gf1XFRWQNbCfnM3OHHeLeNo9eG4ZQbv4OlZLisXI81r71 0DWe/b/RZM0NdkgfSUM+Yen8KPgj4JcfA3cM6yKZClmF0IvrvvC4LvEBmCSoSfId uQvPAwEoCFm0iuGhcL7XHCxL8QUKelrOWgzRzeMiVfX6XdSwW9evytjqQ5hYl5ov lwIfmuK6Zc/c9mGLzbYG4b73eW1Kwhb9g+wvJRK44rFHZh5ztoYPgoB5Y+ECo9zO nIfc9FjeyMIjLJEKSybYf8BZlyLUJPprUBLx0xHdL4cXCb62Im947F4d6uTwDyNI oprIptQBMcJUwxSdIyreH5KyuV0Kyb20akmUB0wo6lx1+ilAQ0UsP9zTIkM4ihEN Lu85RdX973iIJ9M9fS00LLOPn9Osu5QSMw0LcSHTr7Eme83WrfGY3juxf61SJcE4 ZxYki79OFzK8gFxEjstFqpY= =kQfQ -----END PGP SIGNATURE----- Merge tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added support for Nintendo N64 - added support for Realtek RTL83XX SoCs - kaslr support for Loongson64 - first steps to get rid of set_fs() - DMA runtime coherent/non-coherent selection cleanup - cleanups and fixes * tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (98 commits) Revert "MIPS: Add basic support for ptrace single step" vmlinux.lds.h: catch more UBSAN symbols into .data MIPS: kernel: Drop kgdb_call_nmi_hook MAINTAINERS: Add git tree for KVM/mips MIPS: Use common way to parse elfcorehdr MIPS: Simplify EVA cache handling Revert "MIPS: kernel: {ftrace,kgdb}: Set correct address limit for cache flushes" MIPS: remove CONFIG_DMA_PERDEV_COHERENT MIPS: remove CONFIG_DMA_MAYBE_COHERENT driver core: lift dma_default_coherent into common code MIPS: refactor the runtime coherent vs noncoherent DMA indicators MIPS/alchemy: factor out the DMA coherent setup MIPS/malta: simplify plat_setup_iocoherency MIPS: Add basic support for ptrace single step MAINTAINERS: replace non-matching patterns for loongson{2,3} MIPS: Make check condition for SDBBP consistent with EJTAG spec mips: Replace lkml.org links with lore Revert "MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op" MIPS: crash_dump.c: Simplify copy_oldmem_page() Revert "mips: Manually call fdt_init_reserved_mem() method" ... |
||
![]() |
02f9fc286e |
Power management updates for 5.12-rc1
- Add new power capping facility called DTPM (Dynamic Thermal Power Management), based on the existing power capping framework, to allow aggregate power constraints to be applied to sets of devices in a distributed manner, along with a CPU backend driver based on the Energy Model (Daniel Lezcano, Dan Carpenter, Colin Ian King). - Add AlderLake Mobile support to the Intel RAPL power capping driver and make it use the topology interface when laying out the system topology (Zhang Rui, Yunfeng Ye). - Drop the cpufreq tango driver belonging to a platform that is not supported any more (Arnd Bergmann). - Drop the redundant CPUFREQ_STICKY and CPUFREQ_PM_NO_WARN cpufreq driver flags (Viresh Kumar). - Update cpufreq drivers: * Fix max CPU frequency discovery in the intel_pstate driver and make janitorial changes in it (Chen Yu, Rafael Wysocki, Nigel Christian). * Fix resource leaks in the brcmstb-avs-cpufreq driver (Christophe JAILLET). * Make the tegra20 driver use the resource-managed API (Dmitry Osipenko). * Enable boost support in the qcom-hw driver (Shawn Guo). - Update the operating performance points (OPP) framework: * Clean up the OPP core (Dmitry Osipenko, Viresh Kumar). * Extend the OPP API by adding new helpers to it (Dmitry Osipenko, Viresh Kumar). * Allow required OPPs to be used for devfreq devices and update the devfreq governor code accordingly (Saravana Kannan). * Prepare the framework for introducing new dev_pm_opp_set_opp() helper (Viresh Kumar). * Drop dev_pm_opp_set_bw() and update related drivers (Viresh Kumar). * Allow lazy linking of required-OPPs (Viresh Kumar). - Simplify and clean up devfreq somewhat (Lukasz Luba, Yang Li, Pierre Kuo). - Update the generic power domains (genpd) framework: * Use device's next wakeup to determine domain idle state (Lina Iyer). * Improve initialization and debug (Dmitry Osipenko). * Simplify computations (Abaci Team). - Make janitorial changes in the core code handling system sleep and PM-runtime (Bhaskar Chowdhury, Bjorn Helgaas, Rikard Falkeborn, Zqiang). - Update the MAINTAINERS entry for the exynos cpuidle driver and drop DEBUG definition from intel_idle (Krzysztof Kozlowski, Tom Rix). - Extend the PM clock layer to cover clocks that must sleep (Nicolas Pitre). - Update the cpupower utility: * Update cpupower command, add support for AMD family 0x19 and clean up the code to remove many of the family checks to make future family updates easier (Nathan Fontenot, Robert Richter). * Add Makefile dependencies for install targets to allow building cpupower in parallel rather than serially (Ivan Babrou). - Make janitorial changes in power management Kconfig (Lukasz Luba). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmAquvMSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRx7MEQAIFx7WGu0TquvYYbX1Op4oxHaN5wLZba XZjh5g4dSn+fKF+WXO4+Ze8VwFx2E6p2650OYJ9A3H83yqjWz5x0CoYm++LTWkWJ CRPhyAL2JzrqDL2oJ/7XdK41cz/DT1p2B5cdOVeI4OaLhTzLa4TAO3EwCA/Eyayb qumbp6vt3G3zfSDLMA8Wa/HDNaWcN0/NDdnhlj9zlT27COyFJJUARa1jGA/5+2BK k/LP7homFIPf8vTGMkL/JuHU7Fsqa2vCFEzB22xyD8GE59dHoXYTlKA2pOr/2lJM VV5h0FDS6lFbkp6AQDHwh5tsGusT7dREFXebBUWtmETZmB9iQZXAo4k+MnUbYGSt stYFdDJpQkK42icF7uhJE1xuZkQ16xBm02pBvlJWMSyYyHCHhUH83VxhA11szA5/ glLHfhhdbAa1BKmFHuTEZiwCAssY+YmoAvUpgLW04csJ4s4+my7VCgVe6jOILv2H 0PdakYam/UEXPoDR4bAdJePZQvwbeUQUtmZ/oYb7Ab2ztfFcpVtZ5T0QeKazXkiZ BDtJ+XQJAhZOmLL4u2owGdevvjQU+68QZF1NfMoOTW2K7bcok3pVjj5uKRkfir6F R74mzHNNKOWBO9NwByinrMNJqHqPxfbREvg92Xi7GGDtt+rD7/K3K4Au+9W9MxwL AvUhPGadUZT1 =9xhj -----END PGP SIGNATURE----- Merge tag 'pm-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new power capping facility allowing aggregate power constraints to be applied to sets of devices in a distributed manner, add a new CPU ID to the RAPL power capping driver and improve it, drop a cpufreq driver belonging to a platform that is not supported any more, drop two redundant cpufreq driver flags, update cpufreq drivers (intel_pstate, brcmstb-avs, qcom-hw), update the operating performance points (OPP) framework (code cleanups, new helpers, devfreq-related modifications), clean up devfreq, extend the PM clock layer, update the cpupower utility and make assorted janitorial changes. Specifics: - Add new power capping facility called DTPM (Dynamic Thermal Power Management), based on the existing power capping framework, to allow aggregate power constraints to be applied to sets of devices in a distributed manner, along with a CPU backend driver based on the Energy Model (Daniel Lezcano, Dan Carpenter, Colin Ian King). - Add AlderLake Mobile support to the Intel RAPL power capping driver and make it use the topology interface when laying out the system topology (Zhang Rui, Yunfeng Ye). - Drop the cpufreq tango driver belonging to a platform that is not supported any more (Arnd Bergmann). - Drop the redundant CPUFREQ_STICKY and CPUFREQ_PM_NO_WARN cpufreq driver flags (Viresh Kumar). - Update cpufreq drivers: * Fix max CPU frequency discovery in the intel_pstate driver and make janitorial changes in it (Chen Yu, Rafael Wysocki, Nigel Christian). * Fix resource leaks in the brcmstb-avs-cpufreq driver (Christophe JAILLET). * Make the tegra20 driver use the resource-managed API (Dmitry Osipenko). * Enable boost support in the qcom-hw driver (Shawn Guo). - Update the operating performance points (OPP) framework: * Clean up the OPP core (Dmitry Osipenko, Viresh Kumar). * Extend the OPP API by adding new helpers to it (Dmitry Osipenko, Viresh Kumar). * Allow required OPPs to be used for devfreq devices and update the devfreq governor code accordingly (Saravana Kannan). * Prepare the framework for introducing new dev_pm_opp_set_opp() helper (Viresh Kumar). * Drop dev_pm_opp_set_bw() and update related drivers (Viresh Kumar). * Allow lazy linking of required-OPPs (Viresh Kumar). - Simplify and clean up devfreq somewhat (Lukasz Luba, Yang Li, Pierre Kuo). - Update the generic power domains (genpd) framework: * Use device's next wakeup to determine domain idle state (Lina Iyer). * Improve initialization and debug (Dmitry Osipenko). * Simplify computations (Abaci Team). - Make janitorial changes in the core code handling system sleep and PM-runtime (Bhaskar Chowdhury, Bjorn Helgaas, Rikard Falkeborn, Zqiang). - Update the MAINTAINERS entry for the exynos cpuidle driver and drop DEBUG definition from intel_idle (Krzysztof Kozlowski, Tom Rix). - Extend the PM clock layer to cover clocks that must sleep (Nicolas Pitre). - Update the cpupower utility: * Update cpupower command, add support for AMD family 0x19 and clean up the code to remove many of the family checks to make future family updates easier (Nathan Fontenot, Robert Richter). * Add Makefile dependencies for install targets to allow building cpupower in parallel rather than serially (Ivan Babrou). - Make janitorial changes in power management Kconfig (Lukasz Luba)" * tag 'pm-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits) MAINTAINERS: cpuidle: exynos: include header in file pattern powercap: intel_rapl: Use topology interface in rapl_init_domains() powercap: intel_rapl: Use topology interface in rapl_add_package() PM: sleep: Constify static struct attribute_group PM: Kconfig: remove unneeded "default n" options PM: EM: update Kconfig description and drop "default n" option cpufreq: Remove unused flag CPUFREQ_PM_NO_WARN cpufreq: Remove CPUFREQ_STICKY flag PM / devfreq: Add required OPPs support to passive governor PM / devfreq: Cache OPP table reference in devfreq OPP: Add function to look up required OPP's for a given OPP PM / devfreq: rk3399_dmc: Remove unneeded semicolon opp: Replace ENOTSUPP with EOPNOTSUPP opp: Fix "foo * bar" should be "foo *bar" opp: Don't ignore clk_get() errors other than -ENOENT opp: Update bandwidth requirements based on scaling up/down opp: Allow lazy-linking of required-opps opp: Remove dev_pm_opp_set_bw() devfreq: tegra30: Migrate to dev_pm_opp_set_opp() drm: msm: Migrate to dev_pm_opp_set_opp() ... |
||
![]() |
3e4c982f1c |
Revert "driver core: Set fw_devlink=on by default"
This reverts commit
|
||
![]() |
4cd48bb3b0
|
arch_numa: fix common code printing of phys_addr_t
Fix build warnings in the arch_numa common code:
../include/linux/kern_levels.h:5:18: warning: format '%Lx' expects argument of type 'long long unsigned int', but argument 3 has type 'phys_addr_t' {aka 'unsigned int'} [-Wformat=]
../drivers/base/arch_numa.c:360:56: note: format string is defined here
360 | pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
../drivers/base/arch_numa.c:435:39: note: format string is defined here
435 | pr_info("Faking a node at [mem %#018Lx-%#018Lx]\n", start, end - 1);
Fixes:
|
||
![]() |
0c8e97c86b |
ASoC: Updates for v5.12
Another quiet release in terms of features, though several of the drivers got quite a bit of work and there were a lot of general changes resulting from Morimoto-san's ongoing cleanup work. - As ever, lots of hard work by Morimoto-san cleaning up the code and making it more consistent. - Many improvements in the Intel drivers including a wide range of quirks and bug fixes. - A KUnit testsuite for the topology code. - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAtZ7cACgkQJNaLcl1U h9DD5Af/eeERQ2uVOqtw0If+XL1xRYe6RewgDoNcO/l/5WxBLrBH6NbEf0OwNJeg vzZAkUBtxmx6XiW2M/h+4ucW1OPcg5IzxIWTHfGDMlKIxzb0jgWugRnJ7sdTnOs3 c+QHnvuOT7QzZBviAIkc5uZ5thAImYF8zDyKoGF5llztmnBYymtgpnvnRNZGM0ou 76oUzSvkCFI2b0Yf6bpGok2nBVlOu82HSHOUKjXVWk+LAeiivlYGOEZpdIKEe3S8 u6atQJ29XRr52Yuc2z4xnFQTW1cIDlwj2Fk5x/z8hX+5nRhNSGuIv1l5m7TfBj3e mCO9cltKZxly0NXysgekn95JHwwwkA== =MJSb -----END PGP SIGNATURE----- Merge tag 'asoc-v5.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.12 Another quiet release in terms of features, though several of the drivers got quite a bit of work and there were a lot of general changes resulting from Morimoto-san's ongoing cleanup work. - As ever, lots of hard work by Morimoto-san cleaning up the code and making it more consistent. - Many improvements in the Intel drivers including a wide range of quirks and bug fixes. - A KUnit testsuite for the topology code. - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers. |
||
![]() |
6621cd2db5 |
Merge branches 'pm-sleep', 'pm-core', 'pm-domains' and 'pm-clk'
* pm-sleep: PM: sleep: Constify static struct attribute_group PM: sleep: Use dev_printk() when possible PM: sleep: No need to check PF_WQ_WORKER in thaw_kernel_threads() * pm-core: PM: runtime: Fix typos and grammar PM: runtime: Fix resposible -> responsible in runtime.c * pm-domains: PM: domains: Simplify the calculation of variables PM: domains: Add "performance" column to debug summary PM: domains: Make of_genpd_add_subdomain() return -EPROBE_DEFER PM: domains: Make set_performance_state() callback optional PM: domains: use device's next wakeup to determine domain idle state PM: domains: inform PM domain of a device's next wakeup * pm-clk: PM: clk: make PM clock layer compatible with clocks that must sleep |
||
![]() |
6d4e9a8efe |
driver core: lift dma_default_coherent into common code
Lift the dma_default_coherent variable from the mips architecture code to the driver core. This allows an architecture to sdefault all device to be DMA coherent at run time, even if the kernel is build with support for DMA noncoherent device. By allowing device_initialize to set the ->dma_coherent field to this default the amount of arch hooks required for this behavior can be greatly reduced. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
![]() |
cb8be8b4b2 |
driver core: platform: Drop of_device_node_put() wrapper
of_device_node_put() is just a wrapper for of_node_put(). The platform driver core is already polluted with of_node pointers and the only 'get' already uses of_node_get() (though typically the get would happen in of_device_alloc()). Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210211232745.1498137-3-robh@kernel.org |
||
![]() |
d77b44d0c0 |
soundwire second update for 5.12-rc1
Some late changes for sdw: - fix for crash on intel driver - support for _no_pm IO calls in sdw regmap -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmAmYhAACgkQfBQHDyUj g0fs5xAAz/seDccbDQrpV99ZcLYyBqP3kH3SKykIzAy4d9UOYKsrL2dwwKmc+y/r J6cUZ05m0OjcJPEJZayI+tvn1sl3qIuNAAk+0KLZ++jy03LajENloArk13T/xhGq GiRlgcCiB1pp1qRk7abAvQWfApeq77Mq3dwKG5lZbOrFZTc+lu78poMnpFfMHF9O cn9h5TrQ1tbqU4gj93DAjI4OOQSq7bxHbz1P38GlYP32ZYZW3WF4Fu0fNk6ZQp52 eraUVO3+2PqbtB8t6PhENCIIJDnO1rgo8Bf//4Fpx3Sa2fECk0TPjOdHH4G7DITI GV8Ar9uG8tb/EyNfS4/R0lHDAaVGnicry2BDFUy3bv7fqnIp/Py8to3L0w3Kx+RF flm3QMEFPUkoDj65n0Vf1E7y6hxT8Kh1VX81ssFKzkc7vBgtWjba+dQDn+Ym46H5 Njsp/KovokK5MwMkfh5mrN+kmayEhwwltzdMb5OTw2y9NgChDNxXML8JsHTXtoLL 05lKOgXzVQLcALagjZKmkiVt9KtCgDJW2Kmsp/FBO9hOA/dCA5aMcWiYhRarkl8q z80DunYtA+RUBm+2P4tpntCCxlWZIvjbtpggmmJ6r5m3eB5m5Ud/lOEauyvADUT6 eT+JsgEZr31Yt4s9K1UBB6OiQatIxKwvB2PZDiBSKWUJpl00H0g= =eJnY -----END PGP SIGNATURE----- Merge tag 'soundwire-2_5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire second update for 5.12-rc1 Some late changes for sdw: - fix for crash on intel driver - support for _no_pm IO calls in sdw regmap * tag 'soundwire-2_5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: regmap: sdw-mbq: use MODULE_LICENSE("GPL") regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ regmap: sdw: use _no_pm functions in regmap_read/write soundwire: intel: fix possible crash when no device is detected |
||
![]() |
471b12c43f |
driver core: auxiliary bus: Fix calling stage for auxiliary bus init
When the auxiliary device code is built into the kernel, it can be executed
before the auxiliary bus is registered. This causes bus->p to be not
allocated and triggers a NULL pointer dereference when the auxiliary bus
device gets added with bus_add_device(). Call the auxiliary_bus_init()
under driver_init() so the bus is initialized before devices.
Below is the kernel splat for the bug:
[ 1.948215] BUG: kernel NULL pointer dereference, address: 0000000000000060
[ 1.950670] #PF: supervisor read access in kernel mode
[ 1.950670] #PF: error_code(0x0000) - not-present page
[ 1.950670] PGD 0
[ 1.950670] Oops: 0000 1 SMP NOPTI
[ 1.950670] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-intel-nextsvmtest+ #2205
[ 1.950670] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1.950670] RIP: 0010:bus_add_device+0x64/0x140
[ 1.950670] Code: 00 49 8b 75 20 48 89 df e8 59 a1 ff ff 41 89 c4 85 c0 75 7b 48 8b 53 50 48 85 d2 75 03 48 8b 13 49 8b 85 a0 00 00 00 48 89 de <48> 8
78 60 48 83 c7 18 e8 ef d9 a9 ff 41 89 c4 85 c0 75 45 48 8b
[ 1.950670] RSP: 0000:ff46032ac001baf8 EFLAGS: 00010246
[ 1.950670] RAX: 0000000000000000 RBX: ff4597f7414aa680 RCX: 0000000000000000
[ 1.950670] RDX: ff4597f74142bbc0 RSI: ff4597f7414aa680 RDI: ff4597f7414aa680
[ 1.950670] RBP: ff46032ac001bb10 R08: 0000000000000044 R09: 0000000000000228
[ 1.950670] R10: ff4597f741141b30 R11: ff4597f740182a90 R12: 0000000000000000
[ 1.950670] R13: ffffffffa5e936c0 R14: 0000000000000000 R15: 0000000000000000
[ 1.950670] FS: 0000000000000000(0000) GS:ff4597f7bba00000(0000) knlGS:0000000000000000
[ 1.950670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.950670] CR2: 0000000000000060 CR3: 000000002140c001 CR4: 0000000000f71ef0
[ 1.950670] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1.950670] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1.950670] PKRU: 55555554
[ 1.950670] Call Trace:
[ 1.950670] device_add+0x3ee/0x850
[ 1.950670] __auxiliary_device_add+0x47/0x60
[ 1.950670] idxd_pci_probe+0xf77/0x1180
[ 1.950670] local_pci_probe+0x4a/0x90
[ 1.950670] pci_device_probe+0xff/0x1b0
[ 1.950670] really_probe+0x1cf/0x440
[ 1.950670] ? rdinit_setup+0x31/0x31
[ 1.950670] driver_probe_device+0xe8/0x150
[ 1.950670] device_driver_attach+0x58/0x60
[ 1.950670] __driver_attach+0x8f/0x150
[ 1.950670] ? device_driver_attach+0x60/0x60
[ 1.950670] ? device_driver_attach+0x60/0x60
[ 1.950670] bus_for_each_dev+0x79/0xc0
[ 1.950670] ? kmem_cache_alloc_trace+0x323/0x430
[ 1.950670] driver_attach+0x1e/0x20
[ 1.950670] bus_add_driver+0x154/0x1f0
[ 1.950670] driver_register+0x70/0xc0
[ 1.950670] __pci_register_driver+0x54/0x60
[ 1.950670] idxd_init_module+0xe2/0xfc
[ 1.950670] ? idma64_platform_driver_init+0x19/0x19
[ 1.950670] do_one_initcall+0x4a/0x1e0
[ 1.950670] kernel_init_freeable+0x1fc/0x25c
[ 1.950670] ? rest_init+0xba/0xba
[ 1.950670] kernel_init+0xe/0x116
[ 1.950670] ret_from_fork+0x1f/0x30
[ 1.950670] Modules linked in:
[ 1.950670] CR2: 0000000000000060
[ 1.950670] --[ end trace cd7d1b226d3ca901 ]--
Fixes:
|
||
![]() |
8d8d958428 |
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
"GPL v2" is the same as "GPL". It exists for historic reasons. See Documentation/process/license-rules.rst Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210122070634.12825-8-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
![]() |
4038e54b8f |
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
Use no_pm versions for write and read. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210122070634.12825-7-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
![]() |
d288a5712e |
regmap: sdw: use _no_pm functions in regmap_read/write
sdw_update_slave_status will be invoked when a codec is attached,
and the codec driver will initialize the codec with regmap functions
while the codec device is pm_runtime suspended.
regmap routines currently rely on regular SoundWire IO functions,
which will call pm_runtime_get_sync()/put_autosuspend.
This causes a deadlock where the resume routine waits for an
initialization complete signal that while the initialization complete
can only be reached when the resume completes.
The only solution if we allow regmap functions to be used in resume
operations as well as during codec initialization is to use _no_pm
routines. The duty of making sure the bus is operational needs to be
handled above the regmap level.
Fixes:
|
||
![]() |
bab2d712ee |
PM: domains: Mark fwnodes when their powerdomain is added/removed
This allows fw_devlink to recognize power domain drivers that don't use the device-driver model to initialize the device. fw_devlink will use this information to make sure consumers of such power domain aren't indefinitely blocked from probing, waiting for the power domain device to appear and bind to a driver. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210205222644.2357303-8-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
74c782cff7 |
driver core: fw_devlink: Handle suppliers that don't use driver core
Device links only work between devices that use the driver core to match and bind a driver to a device. So, add an API for frameworks to let the driver core know that a fwnode has been initialized by a driver without using the driver core. Then use this information to make sure that fw_devlink doesn't make the consumers wait indefinitely on suppliers that'll never bind to a driver. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210205222644.2357303-6-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
19d0f5f6bf |
driver core: Add fw_devlink.strict kernel param
This param allows forcing all dependencies to be treated as mandatory. This will be useful for boards in which all optional dependencies like IOMMUs and DMAs need to be treated as mandatory dependencies. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210205222644.2357303-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
9528e0d9c1 |
driver core: fw_devlink: Detect supplier devices that will never be added
During the initial parsing of firmware by fw_devlink, fw_devlink might
infer that some supplier firmware nodes would get populated as devices.
But the inference is not always correct. This patch tries to logically
detect and fix such mistakes as boot progresses or more devices probe.
fw_devlink makes a fundamental assumption that once a device binds to a
driver, it will populate (i.e: add as struct devices) all the child
firmware nodes that could be populated as devices (if they aren't
populated already).
So, whenever a device probes, we check all its child firmware nodes. If
a child firmware node has a corresponding device populated, we don't
modify the child node or its descendants. However, if a child firmware
node has not been populated as a device, we delete all the fwnode links
where the child node or its descendants are suppliers. This ensures that
no other device is blocked on a firmware node that will never be
populated as a device. We also mark such fwnodes as NOT_DEVICE, so that
no new fwnode links are created with these nodes as suppliers.
Fixes:
|
||
![]() |
e5e1c20978 |
driver core: platform: Emit a warning if a remove callback returned non-zero
The driver core ignores the return value of a bus' remove callback. However a driver returning an error code is a hint that there is a problem, probably a driver author who expects that returning e.g. -EBUSY has any effect. The right thing to do would be to make struct platform_driver::remove() return void. With the immense number of platform drivers this is however a big quest and I hope to prevent at least a few new drivers that return an error code here. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210207211537.19992-1-uwe@kleine-koenig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
151f6ff78c |
software node: Provide replacement for device_add_properties()
At the moment the function device_del() is calling device_remove_properties() unconditionally. That will result into the reference count of the software node attached to the device being decremented, and in most cases it will hit 0 at that point. So in practice device_del() will unregister the software node attached to the device, even if that was not the intention of the caller. Right now software nodes can not be reused or shared because of that. So device_del() can not unregister the software nodes unconditionally like that. Unfortunately some of the users of device_add_properties() are now relying on this behaviour. Because of that, and also in general, we do need a function that can offer similar behaviour where the lifetime of the software node is bound to the lifetime of the device. But it just has to be a separate function so the behaviour is optional. We can not remove the device_remove_properties() call from device_del() before we have that new function, and before we have replaced device_add_properties() calls with it in all the places that require that behaviour. This adds function device_create_managed_software_node() that can be used for exactly that purpose. Software nodes created with it are declared "managed", and separate handling for those nodes is added to the software node code. The reference count of the "managed" nodes is decremented when the device they are attached to is removed. This will not affect the other nodes that are not declared "managed". The function device_create_managed_software_node() has also one additional feature that device_add_properties() does not have. It allows the software nodes created with it to be part of a node hierarchy by taking also an optional parent node as parameter. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210204141711.53775-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
6dc466d34f |
PM: domains: Simplify the calculation of variables
Fix the following coccicheck warnings: ./drivers/base/power/domain.c:938:31-33: WARNING !A || A && B is equivalent to !A || B. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Suggested-by: Jiapeng Zhong <oswb@linux.alibaba.com> Signed-off-by: Abaci Team <abaci-bugfix@linux.alibaba.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
0b9112a588 |
Linux 5.11-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAXJhEeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGXF0H/jwVgN3VudFrc5xb F1KV/eLz2wp3KHCh8TrdhyItUv9qYZnwroNSFuwQsKyeOHeod192oHda9UCIoCAo k8aFG4iILwXfVnhNUXeLjJD7WfP7AaJZpPqn6pvzJH9ONN1GsLO41iYO/v/MKcmS OLPivR1/Yv3ON0SktEXK57kxGGKEcgSRRBmlouo16qhb1ME8flUphx9eLZ7uchAm bQ2Ui/F6TmsUD1BaPl8scC/FWbbeu5fZtAkL/VxuGGJh5Uisb/yTQluG4+mCGw4y zTPsHI3D59QP3YePO5cbq8h1F4V88rCt/EHn4/RmRpRgvgHT8XbvG223/CVw9h3R 26E6z2k= =3w5Q -----END PGP SIGNATURE----- Merge tag 'v5.11-rc6' into patchwork Linux 5.11-rc6 * tag 'v5.11-rc6': (1466 commits) Linux 5.11-rc6 leds: rt8515: Add Richtek RT8515 LED driver dt-bindings: leds: Add DT binding for Richtek RT8515 leds: trigger: fix potential deadlock with libata leds: leds-ariel: convert comma to semicolon leds: leds-lm3533: convert comma to semicolon dt-bindings: Cleanup standard unit properties soc: litex: Properly depend on HAS_IOMEM tty: avoid using vfs_iocb_iter_write() for redirected console writes null_blk: cleanup zoned mode initialization cifs: fix dfs domain referrals drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors drm/nouveau/kms/nv50-: Report max cursor size to userspace drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices drm/nouveau/dispnv50: Restore pushing of all data. io_uring: reinforce cancel on flush during exit cifs: returning mount parm processing errors correctly rxrpc: Fix memory leak in rxrpc_lookup_local mlxsw: spectrum_span: Do not overwrite policer configuration ... |
||
![]() |
0bfa0820c2 |
PM: clk: make PM clock layer compatible with clocks that must sleep
The clock API splits its interface into sleepable ant atomic contexts: - clk_prepare/clk_unprepare for stuff that might sleep - clk_enable_clk_disable for anything that may be done in atomic context The code handling runtime PM for clocks only calls clk_disable() on suspend requests, and clk_enable on resume requests. This means that runtime PM with clock providers that only have the prepare/unprepare methods implemented is basically useless. Many clock implementations can't accommodate atomic contexts. This is often the case when communication with the clock happens through another subsystem like I2C or SCMI. Let's make the clock PM code useful with such clocks by safely invoking clk_prepare/clk_unprepare upon resume/suspend requests. Of course, when such clocks are registered with the PM layer then pm_runtime_irq_safe() can't be used, and neither pm_runtime_suspend() nor pm_runtime_resume() may be invoked in atomic context. For clocks that do implement the enable and disable methods then everything just works as before. A note on sparse: According to https://lwn.net/Articles/109066/ there are things that sparse can't cope with. In particular, pm_clk_op_lock() and pm_clk_op_unlock() may or may not lock/unlock psd->lock depending on some runtime condition. To work around that we tell it the lock is always untaken for the purpose of static analisys. Thanks to Naresh Kamboju for reporting issues with the initial patch. Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
eb23d91af5 |
PM: sleep: Use dev_printk() when possible
Use dev_printk() when possible to make messages more consistent with other device-related messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
38009c7667 |
drivers/base: build kunit tests without structleak plugin
The structleak plugin causes the stack frame size to grow immensely: drivers/base/test/property-entry-test.c: In function 'pe_test_reference': drivers/base/test/property-entry-test.c:481:1: error: the frame size of 2640 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] 481 | } | ^ drivers/base/test/property-entry-test.c: In function 'pe_test_uints': drivers/base/test/property-entry-test.c:99:1: error: the frame size of 2592 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Turn it off in this file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210125124533.101339-3-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
6091b08eda |
drivers: base: power: Fix resposible -> responsible in runtime.c
s/resposible/responsible/ Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210120143312.3229181-1-unixbhaskar@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
4044b2fcfb |
drivers: base: change 'driver_create_groups' to 'driver_add_groups' in printk
driver_create_groups doesn't seem to have ever existed. Change its mention in a printk to 'driver_add_groups'. Signed-off-by: Joe Pater <02joepater06@gmail.com> Link: https://lore.kernel.org/r/20210110145442.15301-1-02joepater06@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
![]() |
000c08fda6 |
media: software_node: Add support for fwnode_graph*() family of functions
This implements the remaining .graph_*() callbacks in the fwnode operations structure for the software nodes. That makes the fwnode_graph_*() functions available in the drivers also when software nodes are used. The implementation tries to mimic the "OF graph" as much as possible, but there is no support for the "reg" device property. The ports will need to have the index in their name which starts with "port@" (for example "port@0", "port@1", ...) and endpoints will use the index of the software node that is given to them during creation. The port nodes can also be grouped under a specially named "ports" subnode, just like in DT, if necessary. The remote-endpoints are reference properties under the endpoint nodes that are named "remote-endpoint". Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Co-developed-by: Daniel Scally <djrscally@gmail.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
![]() |
fc002f0f23 |
media: software_node: unregister software_nodes in reverse order
To maintain consistency with software_node_unregister_nodes(), reverse the order in which the software_node_unregister_node_group() function unregisters nodes. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
![]() |
d9b1103bc6 |
media: software_node: Enforce parent before child ordering of nodes arrays
Registering software_nodes with the .parent member set to point to a currently unregistered software_node has the potential for problems, so enforce parent -> child ordering in arrays passed in to software_node_register_nodes(). Software nodes that are children of another software node should be unregistered before their parent. To allow easy unregistering of an array of software_nodes ordered parent to child, reverse the order in which software_node_unregister_nodes() unregisters software_nodes. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
![]() |
acd418bfcf |
media: device property: Call fwnode_graph_get_endpoint_by_id() for fwnode->secondary
This function is used to find fwnode endpoints against a device. In some instances those endpoints are software nodes which are children of fwnode->secondary. Add support to fwnode_graph_get_endpoint_by_id() to find those endpoints by recursively calling itself passing the ptr to fwnode->secondary in the event no endpoint is found for the primary. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
![]() |
5273382d03 |
media: device property: Return true in fwnode_device_is_available for NULL ops
Some types of fwnode_handle do not implement the device_is_available() check, such as those created by software_nodes. There isn't really a meaningful way to check for the availability of a device that doesn't actually exist, so if the check isn't implemented just assume that the "device" is present. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
![]() |
fb5ec981ad |
media: software_node: Fix refcounts in software_node_get_next_child()
The software_node_get_next_child() function currently does not hold
references to the child software_node that it finds or put the ref that
is held against the old child - fix that.
Fixes:
|
||
![]() |
30e88d017f |
isa: Make the remove callback for isa drivers return void
The driver core ignores the return value of the remove callback, so don't give isa drivers the chance to provide a value. Adapt all isa_drivers with a remove callbacks accordingly; they all return 0 unconditionally anyhow. Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/ Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/ Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/ Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org Signed-off-by: Takashi Iwai <tiwai@suse.de> |