Clang warns (or errors with CONFIG_WERROR=y):
drivers/opp/of.c:1081:28: error: multiple unsequenced modifications to 'val' [-Werror,-Wunsequenced]
1081 | .freq = be32_to_cpup(val++) * 1000,
| ^
1082 | .u_volt = be32_to_cpup(val++),
| ~~
1 error generated.
There is no sequence point in a designated initializer. Move back to
separate variables for the creation of the values, so that there are
sequence points between each evaluation and increment of val.
Fixes: 75bbc92c09d8 ("OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_add() API is limited to add dynamic OPPs with a frequency
and a voltage level. To enable more flexibility, let's add a new API,
dev_pm_opp_add_dynamic() that's takes a struct dev_pm_opp_data* instead of
a list of in-parameters.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
fa155f4f83 ("OPP: Use dev_err_probe() when failing to get icc_path")
failed to actually use the error it was trying to log:
smatch warnings:
drivers/opp/of.c:516 dev_pm_opp_of_find_icc_paths() warn: passing zero to 'dev_err_probe'
Make sure to use the right error and pass it along.
Fixes: fa155f4f83 ("OPP: Use dev_err_probe() when failing to get icc_path")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202306262008.guNLgjt6-lkp@intel.com/
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This, in tandem with dynamic debug, can print useful information about
-EPROBE_DEFFER like below, and keeps similar behavior for other errors:
[ 16.561072] cpu cpu0: error -EPROBE_DEFER: dev_pm_opp_of_find_icc_paths: Unable to get path0
[ 16.575777] platform 18591000.cpufreq: deferred probe pending
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
While adding support for "performance states" in the OPP and genpd core,
it was decided to set the `pstate` field via genpd's
pm_genpd_opp_to_performance_state() helper, to allow platforms to set
`pstate` even if they don't have a corresponding `level` field in the DT
OPP tables (More details are present in commit 6e41766a6a ("PM /
Domain: Implement of_genpd_opp_to_performance_state()")).
Revisiting that five years later clearly suggests that it was
over-designed as all current users are eventually using the `level`
value only.
The previous commit already added necessary checks to make sure pstate
is only used for genpd tables. Lets now simplify this a little, and use
`level` directly and remove `pstate` field altogether.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
It is not very clear right now that the `pstate` field is only valid for
genpd OPP tables and not consumer tables. And there is no checking for
the same at various places.
Add checks in place to verify that and make it clear to the reader.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
This code was added (long back) by commit 009acd196f ("PM / OPP:
Support updating performance state of device's power domain") and at
that time the `opp->pstate` field was used to store the performance
state required by a device's OPP.
Over time that changed and the `->pstate` field is now used only for
genpd devices and consumer devices access that via the required-opps
instead.
Because of all these changes, _opp_table_kref_release() now drops the
constraint only when the genpd's OPP table gets freed and not the
device's. Which is definitely not what we wanted. And dropping the
constraint doesn't have much meaning as the genpd itself is going away.
Moreover, if we want to drop constraints here, then just dropping the
performance constraint alone isn't sufficient as there are other
resource constraints like clk, regulator, etc. too, which must be
handled.
Probably the right thing to do here is to leave this decision to the
consumers, which can call `dev_pm_opp_set_rate(dev, 0)` or similar APIs
to drop all constraints properly. Which many of the consumers already
do.
Remove the special code, which is broken anyway.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
The `opp_table_lock` lock is already used to protect the list elsewhere,
use it while adding or removing entries from it.
Reported-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to stop
including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to convert
more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones
that didn't get picked up elsewhere.
-----BEGIN PGP SIGNATURE-----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=89Zj
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
Now that of_cpu_device_node_get() is defined in of.h, of_device.h is just
implicitly including other includes, and is no longer needed. Adjust the
include files with what was implicitly included by of_device.h (cpu.h and
of.h) and drop including of_device.h.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-18-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The required-opps configuration is closely tied to genpd and performance
states at the moment and it is not very obvious that required-opps can
live without genpds. Though we don't support configuring required-opps
for non-genpd cases currently.
This commit aims at separating these parts, where configuring genpds
would be a special case of configuring the required-opps.
Add a specialized callback, set_required_opps(), to the opp table and
set it to different callbacks accordingly.
This shouldn't result in any functional changes for now.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The opp-microwatt property was added with the intention of providing
platforms a way to specify a precise value for the power consumption
of a device at a given OPP to enable better energy-aware scheduling
decisions by informing the kernel of the total static and dynamic
power of a device at a given OPP, removing the reliance on the EM
subsystem's often flawed estimations. This property is parsed by
opp_parse_supplies(), which creates a hard dependency on the
opp-microvolt property.
Some platforms, such as Apple Silicon, do not describe their device's
voltage regulators in the DT as they cannot be controlled by the kernel
and/or rely on opaque firmware algorithms to control their voltage and
current characteristics at runtime. We can, however, experimentally
determine the power consumption of a given device at a given OPP, taking
advantage of opp-microwatt to provide EAS on such devices as was
initially intended.
Allow platforms to specify and consume any subset of opp-microvolt,
opp-microamp, or opp-microwatt without a hard dependency on
opp-microvolt to enable this functionality on such platforms.
Tested-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Co-developed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
opp_parse_supplies() has grown into too big of a routine (~190 lines)
and it is not straight-forward to understand it anymore.
Break it into smaller routines and reduce code redundancy a bit by using
the same code to parse properties.
This shouldn't result in any logical changes.
Tested-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We missed parsing the named opp-microwatt-<name> property, fix that.
Tested-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other
users/helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor cleanups (Viresh Kumar and Yang Li).
-----BEGIN PGP SIGNATURE-----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=NHBQ
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) updates for 5.20-rc1 from Viresh
Kumar:
"- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other
users/helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor cleanups (Viresh Kumar and Yang Li)."
* tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (43 commits)
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
OPP: Add key specific assert() method to key finding helpers
OPP: Compare bandwidths for all paths in _opp_compare_key()
OPP: Allow multiple clocks for a device
dt-bindings: opp: accept array of frequencies
OPP: Make dev_pm_opp_set_opp() independent of frequency
OPP: Reuse _opp_compare_key() in _opp_add_static_v2()
OPP: Remove rate_not_available parameter to _opp_add()
OPP: Use consistent names for OPP table instances
OPP: Use generic key finding helpers for bandwidth key
OPP: Use generic key finding helpers for level key
OPP: Add generic key finding helpers and use them for freq APIs
OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()
...
The struct dev_pm_opp contains a reference of the DT node, opp->np,
throughout its lifetime. We should increase the refcount for the same
from _opp_add_static_v2(), and drop it while removing the OPP finally.
Signed-off-by: Liang He <windhl@126.com>
[ Viresh: Updated subject / commit log, create _of_clear_opp() and drop
reference from it]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP table contains a reference of the DT node, opp_table->np,
throughout its lifetime. We shouldn't drop the refcount for the same
from _of_init_opp_table(), but do that while removing the OPP table
finally.
Signed-off-by: Liang He <windhl@126.com>
[ Viresh: Updated subject / commit log and drop reference from
_of_clear_opp_table() ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The milli-Watts precision causes rounding errors while calculating
efficiency cost for each OPP. This is especially visible in the 'simple'
Energy Model (EM), where the power for each OPP is provided from OPP
framework. This can cause some OPPs to be marked inefficient, while
using micro-Watts precision that might not happen.
Update all EM users which access 'power' field and assume the value is
in milli-Watts.
Solve also an issue with potential overflow in calculation of energy
estimation on 32bit machine. It's needed now since the power value
(thus the 'cost' as well) are higher.
Example calculation which shows the rounding error and impact:
power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz
power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000
power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18
power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961
power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21
max_freq = 2000MHz
cost_a_mW = 18 * 2000MHz/500MHz = 72
cost_a_uW = 18000 * 2000MHz/500MHz = 72000
cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better
cost_b_uW = 21961 * 2000MHz/600MHz = 73203
The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly
better that the 'cost_b_uW' (this patch uses micro-Watts) and such
would have impact on the 'inefficient OPPs' information in the Cpufreq
framework. This patch set removes the rounding issue.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds support to allow multiple clocks for a device.
The design is pretty much similar to how this is done for regulators,
and platforms can supply their own version of the config_clks() callback
if they have multiple clocks for their device. The core manages the
calls via opp_table->config_clks() eventually.
We have kept both "clk" and "clks" fields in the OPP table structure and
the reason is provided as a comment in _opp_set_clknames(). The same
isn't done for "rates" though and we use rates[0] at most of the places
now.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reuse _opp_compare_key() in _opp_add_static_v2() instead of just
comparing frequency while finding suspend frequency. Also add a comment
over _opp_compare_key() explaining its return values.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
commit 32715be4fe ("opp: Fix adding OPP entries in a wrong order if
rate is unavailable") removed the only user of this field, get rid of
rest of it now.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP table is called "opp_table" at most of the places and "table" at
few. Make all of them follow the same naming convention, "opp_table".
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
-----BEGIN PGP SIGNATURE-----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=tNiB
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP (Operating Performance Points) updates for 5.19-rc1 from Viresh
Kumar:
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
* tag 'opp-updates-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Reorder definition of ceil/floor helpers
opp: Add apis to retrieve opps with interconnect bandwidth
dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM
opp: use list iterator only inside the loop
opp: replace usage of found with dedicated list iterator variable
PM: opp: simplify with dev_err_probe()
OPP: call of_node_put() on error path in _bandwidth_supported()
The .active_power() callback passes the device pointer when it's called.
Aligned with a convetion present in other subsystems and pass the 'dev'
as a first argument. It looks more cleaner.
Adjust all affected drivers which implement that API callback.
Suggested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This code does not call of_node_put(opp_np) if of_get_next_available_child()
returns NULL. But it should.
Fixes: 45679f9b50 ("opp: Don't parse icc paths unnecessarily")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Energy Model (EM) can be created based on DT entry:
'dynamic-power-coefficient'. It's a 'simple' EM which is limited to the
dynamic power. It has to fit into the math formula which requires also
information about voltage. Some of the platforms don't expose voltage
information, thus it's not possible to use EM registration using DT.
This patch aims to fix it. It introduces new implementation of the EM
registration callback. The new mechanism relies on the new OPP feature
allowing to get power (which is coming from "opp-microwatt" DT property)
expressed in micro-Watts.
The patch also opens new opportunity to better support platforms, which
have a decent static power. It allows to register the EM based on real
power measurements which models total power (static + dynamic), so better
reflects real HW.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add new property to the OPP: power value. The OPP entry in the DT can have
"opp-microwatt". Add the needed code to handle this new property in the
existing infrastructure.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fix sparse warning:
drivers/opp/of.c:924 _opp_add_static_v2() warn: passing zero to 'ERR_PTR'
For duplicate OPPs 'ret' be set to zero.
Fixes: deac8703da ("PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The 'required-opps' property is optional. So of_count_phandle_with_args()
can return -ENOENT when queried for required-opps. Handle this case.
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The 'required-opps' property is considered optional, hence remove
the pr_err() in of_parse_required_opp() when we find the property is
missing.
While at it, also fix the return value of
of_get_required_opp_performance_state() when of_parse_required_opp()
fails, return a -ENODEV instead of the -EINVAL.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This WARN can be triggered per-core and the stack trace is not useful.
Replace it with plain dev_err(). Fix a comment while at it.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Don't limit required_opp_table to genpd only. One possible use case is
cpufreq based devfreq governor, which can use required-opps property to
derive devfreq from cpufreq.
Though the OPP core still doesn't support non-genpd required-opps in
_set_required_opps().
Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[ Viresh: Update _set_required_opps() to check for genpd ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Using list_del_init() instead of list_del() + INIT_LIST_HEAD()
to simpify the code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP core currently requires the required opp tables to be available
before the dependent OPP table is added, as it needs to create links
from the dependent OPP table to the required ones. This may not be
convenient for all the platforms though, as this requires strict
ordering for probing the drivers.
This patch allows lazy-linking of the required-opps. The OPP tables for
which the required-opp-tables aren't available at the time of their
initialization, are added to a special list of OPP tables:
lazy_opp_tables. Later on, whenever a new OPP table is registered with
the OPP core, we check if it is required by an OPP table in the pending
list; if yes, then we complete the linking then and there.
An OPP table is marked unusable until the time all its required-opp
tables are available. And if lazy-linking fails for an OPP table, the
OPP core disables all of its OPPs to make sure no one can use them.
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Print OPP level in debug message of _opp_add_static_v2(). This helps to
chase GENPD bugs.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A few drivers have device's clk but they don't want the OPP core to
handle that. Add a new helper for them, dev_pm_opp_of_add_table_noclk().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
We acquire the clk at the time the OPP table is allocated, though it
works fine, it is not the best place to do so. One of the main reason
being we may need to acquire it again from dev_pm_opp_set_clkname() if
the platform wants another clock to be acquired instead.
There is also requirement from some of the platforms where they do not
want the OPP core to manage the clock at all.
This patch hence defers acquiring the clk until the time we are certain
about which clk we need to acquire and if we really need to acquire one.
With this commit, the clk will get acquired either from
dev_pm_opp_set_clkname() or while we initialize the OPPs within the
table.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
The implementation of dev_pm_opp_of_add_table() and
dev_pm_opp_of_add_table_indexed() are almost identical. Create
_of_add_table_indexed() to reduce code redundancy.
Also remove the duplication of the doc style comments by referring to
dev_pm_opp_of_add_table() from dev_pm_opp_of_add_table_indexed().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
The debug message always prints rate=0 instead of a proper value, fix it.
Fixes: 6c591eec67 ("OPP: Add helpers for reading the binding properties")
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Added Fixes tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The opp binding now allows to have an empty opp table and shared-opp to
still describe that devices share v/f lines.
When initialising an empty opp table, allow such case by:
- treating such conditions with warnings in place of errors
- don't fail on empty table
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Viresh Kumar