bmips_wr_vec() copies exception vector code from start to dst.
The call to dma_cache_wback() needs to flush (end-start) bytes,
starting at dst, from write-back cache to memory.
Signed-off-by: Petri Gynther <pgynther@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10193/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull drm fixes from Dave Airlie:
"This is made up 4 groups of fixes detailed below.
vgem:
Due to some misgivings about possible bad use cases this allow,
backout a chunk of the interface to stop those use cases for now.
radeon:
Fix for an oops regression in the audio code, and a partial revert
for a fix that was cauing problems.
nouveau:
regression fix for Fermi, and display-less Maxwell boot fixes.
drm core:
a fix for i915 cursor vblank waiting in the atomic helpers"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/gr/gm204: remove a stray printk
drm/nouveau/devinit/gm100-: force devinit table execution on boards without PDISP
drm/nouveau/devinit/gf100: make the force-post condition more obvious
drm/nouveau/gr/gf100-: fix wrong constant definition
drm/radeon: partially revert "fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling"
drm/radeon/audio: make sure connector is valid in hotplug case
Revert "drm/radeon: only mark audio as connected if the monitor supports it (v3)"
drm/radeon: don't share plls if monitors differ in audio support
drm/vgem: drop DRIVER_PRIME (v2)
drm/plane-helper: Adapt cursor hack to transitional helpers
No big surprise here, just a bunch of small fixes for HD-audio and
USB-audio.
- Partial revert of widget power-saving for IDT codecs
- Revert mute-LED enum ctl for Thinkpads due to confusion
- A quirk for a new Radeon HDMI controller
- Realtek codec name fix for Dell
- A workaround for headphone mic boost on some laptops
- stream_pm ops setup (and its fix for regression)
- Another quirk for MS LifeCam USB-audio
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=84pv
-----END PGP SIGNATURE-----
Merge tag 'sound-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No big surprise here, just a bunch of small fixes for HD-audio and
USB-audio:
- partial revert of widget power-saving for IDT codecs
- revert mute-LED enum ctl for Thinkpads due to confusion
- a quirk for a new Radeon HDMI controller
- Realtek codec name fix for Dell
- a workaround for headphone mic boost on some laptops
- stream_pm ops setup (and its fix for regression)
- another quirk for MS LifeCam USB-audio"
* tag 'sound-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix lost sound due to stream_pm ops cleanup
ALSA: hda - Disable Headphone Mic boost for ALC662
ALSA: hda - Disable power_save_node for IDT92HD71bxx
ALSA: hda - Fix noise on AMD radeon 290x controller
ALSA: hda - Set stream_pm ops automatically by generic parser
ALSA: hda/realtek - Add ALC256 alias name for Dell
Revert "ALSA: hda - Add mute-LED mode control to Thinkpad"
ALSA: usb-audio: Add quirk for MS LifeCam HD-3000
dm_merge_bvec() was originally added in f6fccb ("dm: introduce
merge_bvec_fn"). In that commit a value in sectors is converted to
bytes using << 9, and then assigned to an int. This code made
assumptions about the value of BIO_MAX_SECTORS.
A later commit 148e51 ("dm: improve documentation and code clarity in
dm_merge_bvec") was meant to have no functional change but it removed
the use of BIO_MAX_SECTORS in favor of using queue_max_sectors(). At
this point the cast from sector_t to int resulted in a zero value. The
fallout being dm_merge_bvec() would only allow a single page to be added
to a bio.
This interim fix is minimal for the benefit of stable@ because the more
comprehensive cleanup of passing a sector_t to all DM targets' merge
function will impact quite a few DM targets.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.19+
dm-multipath accepts 0 path mapping.
# echo '0 2097152 multipath 0 0 0 0' | dmsetup create newdev
Such a mapping can be used to release underlying devices while still
holding requests in its queue until working paths come back.
However, once the multipath device is created over blk-mq devices,
it rejects reloading of 0 path mapping:
# echo '0 2097152 multipath 0 0 1 1 queue-length 0 1 1 /dev/sda 1' \
| dmsetup create mpath1
# echo '0 2097152 multipath 0 0 0 0' | dmsetup load mpath1
device-mapper: reload ioctl on mpath1 failed: Invalid argument
Command failed
With following kernel message:
device-mapper: ioctl: can't change device type after initial table load.
DM tries to inherit the current table type using dm_table_set_type()
but it doesn't work as expected because of unnecessary check about
whether the target type is hybrid or not.
Hybrid type is for targets that work as either request-based or bio-based
and not required for blk-mq or non blk-mq checking.
Fixes: 65803c2059 ("dm table: train hybrid target type detection to select blk-mq if appropriate")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Unfortunately this functionality was merged a little prematurely.
The necessary testing and code review is now complete (or as
complete as it can be) and to code passes a variety of tests
and looks quite sensible.
Also a fix for some recent locking changes - a race was introduced
which causes a reshape request to sometimes fail. No data safety issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Y0Vm
-----END PGP SIGNATURE-----
Merge tag 'md/4.1-rc5-fixes' of git://neil.brown.name/md
Pull m,ore md bugfixes gfrom Neil Brown:
"Assorted fixes for new RAID5 stripe-batching functionality.
Unfortunately this functionality was merged a little prematurely. The
necessary testing and code review is now complete (or as complete as
it can be) and to code passes a variety of tests and looks quite
sensible.
Also a fix for some recent locking changes - a race was introduced
which causes a reshape request to sometimes fail. No data safety
issues"
* tag 'md/4.1-rc5-fixes' of git://neil.brown.name/md:
md: fix race when unfreezing sync_action
md/raid5: break stripe-batches when the array has failed.
md/raid5: call break_stripe_batch_list from handle_stripe_clean_event
md/raid5: be more selective about distributing flags across batch.
md/raid5: add handle_flags arg to break_stripe_batch_list.
md/raid5: duplicate some more handle_stripe_clean_event code in break_stripe_batch_list
md/raid5: remove condition test from check_break_stripe_batch_list.
md/raid5: Ensure a batch member is not handled prematurely.
md/raid5: close race between STRIPE_BIT_DELAY and batching.
md/raid5: ensure whole batch is delayed for all required bitmap updates.
When stacking request-based dm device on non blk-mq device and
device-mapper target could not map the request (error target is used,
multipath target with all paths down, etc), the WARN_ON_ONCE() in
free_rq_clone() will trigger when it shouldn't.
The warning was added by commit aa6df8d ("dm: fix free_rq_clone() NULL
pointer when requeueing unmapped request"). But free_rq_clone() with
clone->q == NULL is valid usage for the case where
dm_kill_unmapped_request() initiates request cleanup.
Fix this false warning by just removing the WARN_ON -- it only generated
false positives and was never useful in catching the intended case
(completing clone request not being mapped e.g. clone->q being NULL).
Fixes: aa6df8d ("dm: fix free_rq_clone() NULL pointer when requeueing unmapped request")
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since commit 100832abf0 ("usb: isp1760: Make HCD support
optional"), CONFIG_USB_ISP1760_HCD is automatically selected when
needed. Enabling that option in the defconfig is now a no-op, and no
longer enables ISP1760 HCD support.
Re-enable the ISP1760 driver in the defconfig by enabling
USB_ISP1760_HOST_ROLE instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It includes a couple of fixes for i.MX6 GPC code to let the new kernel
be able to boot with old DTBs:
- Booting v4.1-rc kernel with old DTBs will fail with a fat warning
(require low-level debug to be seen), due to the adoption of stacked
IRQ domain. The first fix improves the situation by allowing kernel
boot up with old DTBs, although suspend/resume still breaks.
- Booting new kernel with old DTBs that do not have power-domain info
will result in a hang. The second patch fixes the hang by skipping
the kernel power-domain registration if DTB has no power-domain info.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVZalkAAoJEFBXWFqHsHzOk7YH/iQwidJWob015NvrsqUvQlDb
+dIFmUJNFpGqbkLjINDJv0p13lfksuCQ29F/b0R86+sWsRVS/JUKRkVZ1qh83lc9
8ywiTDUqJBEUApwTaVDDqWr6bbYYHC9TdZ/MqJ85hnF2PnwjBS1Vuv+WQuQe/8ru
7LuTzWyqce8u/cYi/0Zs0Vrtmsz5pjhh7Xg1iWXtamJ43v+yqDP/OwZ5BdSkT+P4
J7WWAojVz4iVG4ftNSdJ1CqGuaFP4iMg+HUoS4ecEsyhe6CMdDoq+I2Fuf1aZweS
6clSe/X2HCi7Gspv9oELsNVEci6AfFR/0Ut6LgvSya8AjxZgdu3cmbdDtbPSQ+o=
=dMJE
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Merge "The i.MX fixes for 4.1, 3rd round" from Shawn Guo:
It includes a couple of fixes for i.MX6 GPC code to let the new kernel
be able to boot with old DTBs:
- Booting v4.1-rc kernel with old DTBs will fail with a fat warning
(require low-level debug to be seen), due to the adoption of stacked
IRQ domain. The first fix improves the situation by allowing kernel
boot up with old DTBs, although suspend/resume still breaks.
- Booting new kernel with old DTBs that do not have power-domain info
will result in a hang. The second patch fixes the hang by skipping
the kernel power-domain registration if DTB has no power-domain info.
* tag 'imx-fixes-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx6: gpc: don't register power domain if DT data is missing
ARM: imx6: allow booting with old DT
- Set display clock correctly for exynos4412-trats2
: fix the following error
exynos-drm: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=U0hO
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
Merge "Samsung fix for v4.1" from Kukjin Kim:
- Set display clock correctly for exynos4412-trats2
: fix the following error
exynos-drm: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
* tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: set display clock correctly for exynos4412-trats2
The commit [49fb189725: ALSA: hda - Set stream_pm ops automatically
by generic parser] resulted in regressions on some Realtek and VIA
codecs because these drivers set patch_ops after calling the generic
parser, thus stream_pm got cleared to NULL again. I haven't noticed
since I tested with IDT codec.
Restore (partial revert) the stream_pm ops for them to fix the
regression.
Fixes: 49fb189725 ('ALSA: hda - Set stream_pm ops automatically by generic parser')
Reported-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
when we find that a child has died while we'd been trying to ascend,
we should go into the first live sibling itself, rather than its sibling.
Off-by-one in question had been introduced in "deal with deadlock in
d_walk()" and the fix needs to be backported to all branches this one
has been backported to.
Cc: stable@vger.kernel.org # 3.2 and later
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 2f35c41f58 ("module: Replace module_ref with atomic_t refcnt")
changes the way refcnt is handled but did not update the gdb script to
use the new variable.
Since refcnt is not per-cpu anymore, we can directly read its value.
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Pantelis Koukousoulas <pktoss@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both 'i' and 'bits_per_entry' are signed integers but the result is a
u64 block number. Cast i to u64 to avoid truncation on 32-bit targets.
Found by Coverity (CID 200679).
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The count variable is used to iterate down to (below) zero from the size
of the bitmap and handle the one-filling the remainder of the last
partial bitmap block. The loop conditional expects count to be signed
in order to detect when the final block is processed, after which count
goes negative.
Unfortunately, a recent change made this unsigned along with some other
related fields. The result of is this is that during mount,
omfs_get_imap will overrun the bitmap array and corrupt memory unless
number of blocks happens to be a multiple of 8 * blocksize.
Fix by changing count back to signed: it is guaranteed to fit in an s32
without overflow due to an enforced limit on the number of blocks in the
filesystem.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A static checker found the following issue in the error path for
omfs_fill_super:
fs/omfs/inode.c:552 omfs_fill_super()
warn: missing error code here? 'd_make_root()' failed. 'ret' = '0'
Fix by returning -ENOMEM in this case.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
match_token() expects a NULL terminator at the end of the token list so
that it would know where to stop. Not having one causes it to overrun
to invalid memory.
In practice, passing a mount option that omfs didn't recognize would
sometimes panic the system.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
load_elf_binary() returns `retval', not `error'.
Fixes: a87938b2e2 ("fs/binfmt_elf.c: fix bug in loading of PIE binaries")
Reported-by: James Hogan <james.hogan@imgtec.com>
Cc: Michael Davidson <md@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since tracepoints use RCU for protection, they must not be called on
offline cpus. trace_mm_page_pcpu_drain can be called on an offline cpu
in this scenario caught by LOCKDEP:
===============================
[ INFO: suspicious RCU usage. ]
4.1.0-rc1+ #9 Not tainted
-------------------------------
include/trace/events/kmem.h:265 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
1 lock held by swapper/5/0:
#0: (&(&zone->lock)->rlock){..-...}, at: [<c0000000002073b0>] .free_pcppages_bulk+0x70/0x920
stack backtrace:
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.1.0-rc1+ #9
Call Trace:
.dump_stack+0x98/0xd4 (unreliable)
.lockdep_rcu_suspicious+0x108/0x170
.free_pcppages_bulk+0x60c/0x920
.free_hot_cold_page+0x208/0x280
.destroy_context+0x90/0xd0
.__mmdrop+0x58/0x160
.idle_task_exit+0xf0/0x100
.pnv_smp_cpu_kill_self+0x58/0x2c0
.cpu_die+0x34/0x50
.arch_cpu_idle_dead+0x20/0x40
.cpu_startup_entry+0x708/0x7a0
.start_secondary+0x36c/0x3a0
start_secondary_prolog+0x10/0x14
Fix this by converting mm_page_pcpu_drain trace point into
TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id())
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since tracepoints use RCU for protection, they must not be called on
offline cpus. trace_mm_page_free can be called on an offline cpu in this
scenario caught by LOCKDEP:
===============================
[ INFO: suspicious RCU usage. ]
4.1.0-rc1+ #9 Not tainted
-------------------------------
include/trace/events/kmem.h:170 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
no locks held by swapper/1/0.
stack backtrace:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9
Call Trace:
.dump_stack+0x98/0xd4 (unreliable)
.lockdep_rcu_suspicious+0x108/0x170
.free_pages_prepare+0x494/0x680
.free_hot_cold_page+0x50/0x280
.destroy_context+0x90/0xd0
.__mmdrop+0x58/0x160
.idle_task_exit+0xf0/0x100
.pnv_smp_cpu_kill_self+0x58/0x2c0
.cpu_die+0x34/0x50
.arch_cpu_idle_dead+0x20/0x40
.cpu_startup_entry+0x708/0x7a0
.start_secondary+0x36c/0x3a0
start_secondary_prolog+0x10/0x14
Fix this by converting mm_page_free trace point into TRACE_EVENT_CONDITION
where condition is cpu_online(smp_processor_id())
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since tracepoints use RCU for protection, they must not be called on
offline cpus. trace_kmem_cache_free can be called on an offline cpu in
this scenario caught by LOCKDEP:
===============================
[ INFO: suspicious RCU usage. ]
4.1.0-rc1+ #9 Not tainted
-------------------------------
include/trace/events/kmem.h:148 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
no locks held by swapper/1/0.
stack backtrace:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9
Call Trace:
.dump_stack+0x98/0xd4 (unreliable)
.lockdep_rcu_suspicious+0x108/0x170
.kmem_cache_free+0x344/0x4b0
.__mmdrop+0x4c/0x160
.idle_task_exit+0xf0/0x100
.pnv_smp_cpu_kill_self+0x58/0x2c0
.cpu_die+0x34/0x50
.arch_cpu_idle_dead+0x20/0x40
.cpu_startup_entry+0x708/0x7a0
.start_secondary+0x36c/0x3a0
start_secondary_prolog+0x10/0x14
Fix this by converting kmem_cache_free trace point into
TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id())
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Regression fix for Fermi acceleration, and fixes important to bringing
up display-less Maxwell boards.
* 'linux-4.1' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/gr/gm204: remove a stray printk
drm/nouveau/devinit/gm100-: force devinit table execution on boards without PDISP
drm/nouveau/devinit/gf100: make the force-post condition more obvious
drm/nouveau/gr/gf100-: fix wrong constant definition
XFS uses the internal tmpfile() infrastructure for the whiteout inode
used for RENAME_WHITEOUT operations. For tmpfile inodes, XFS allocates
the inode, drops di_nlink, adds the inode to the agi unlinked list,
calls d_tmpfile() which correspondingly drops i_nlink of the vfs inode,
and then finishes the common inode setup (e.g., clear I_NEW and unlock).
The d_tmpfile() call was originally made inxfs_create_tmpfile(), but was
pulled up out of that function as part of the following commit to
resolve a deadlock issue:
330033d6 xfs: fix tmpfile/selinux deadlock and initialize security
As a result, callers of xfs_create_tmpfile() are responsible for either
calling d_tmpfile() or fixing up i_nlink appropriately. The whiteout
tmpfile allocation helper does neither. As a result, the vfs ->i_nlink
becomes inconsistent with the on-disk ->di_nlink once xfs_rename() links
it back into the source dentry and calls xfs_bumplink().
Update the assert in xfs_rename() to help detect this problem in the
future and update xfs_rename_alloc_whiteout() to decrement the link
count as part of the manual tmpfile inode setup.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
It was missed when we converted everything in XFs to use negative error
numbers, so fix it now. Bug introduced in 3.17 by commit 2451337 ("xfs: global
error sign conversion"), and should go back to stable kernels.
Thanks to Brian Foster for noticing it.
cc: <stable@vger.kernel.org> # 3.17, 3.18, 3.19, 4.0
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_attr_inactive() is supposed to clean up the attribute fork when
the inode is being freed. While it removes attribute fork extents,
it completely ignores attributes in local format, which means that
there can still be active attributes on the inode after
xfs_attr_inactive() has run.
This leads to problems with concurrent inode writeback - the in-core
inode attribute fork is removed without locking on the assumption
that nothing will be attempting to access the attribute fork after a
call to xfs_attr_inactive() because it isn't supposed to exist on
disk any more.
To fix this, make xfs_attr_inactive() completely remove all traces
of the attribute fork from the inode, regardless of it's state.
Further, also remove the in-core attribute fork structure safely so
that there is nothing further that needs to be done by callers to
clean up the attribute fork. This means we can remove the in-core
and on-disk attribute forks atomically.
Also, on error simply remove the in-memory attribute fork. There's
nothing that can be done with it once we have failed to remove the
on-disk attribute fork, so we may as well just blow it away here
anyway.
cc: <stable@vger.kernel.org> # 3.12 to 4.0
Reported-by: Waiman Long <waiman.long@hp.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This results in BMBT corruption, as seen by this test:
# mkfs.xfs -f -d size=40051712b,agcount=4 /dev/vdc
....
# mount /dev/vdc /mnt/scratch
# xfs_io -ft -c "extsize 16m" -c "falloc 0 30g" -c "bmap -vp" /mnt/scratch/foo
which results in this failure on a debug kernel:
XFS: Assertion failed: (blockcount & xfs_mask64hi(64-BMBT_BLOCKCOUNT_BITLEN)) == 0, file: fs/xfs/libxfs/xfs_bmap_btree.c, line: 211
....
Call Trace:
[<ffffffff814cf0ff>] xfs_bmbt_set_allf+0x8f/0x100
[<ffffffff814cf18d>] xfs_bmbt_set_all+0x1d/0x20
[<ffffffff814f2efe>] xfs_iext_insert+0x9e/0x120
[<ffffffff814c7956>] ? xfs_bmap_add_extent_hole_real+0x1c6/0xc70
[<ffffffff814c7956>] xfs_bmap_add_extent_hole_real+0x1c6/0xc70
[<ffffffff814caaab>] xfs_bmapi_write+0x72b/0xed0
[<ffffffff811c72ac>] ? kmem_cache_alloc+0x15c/0x170
[<ffffffff814fe070>] xfs_alloc_file_space+0x160/0x400
[<ffffffff81ddcc29>] ? down_write+0x29/0x60
[<ffffffff815063eb>] xfs_file_fallocate+0x29b/0x310
[<ffffffff811d2bc8>] ? __sb_start_write+0x58/0x120
[<ffffffff811e3e18>] ? do_vfs_ioctl+0x318/0x570
[<ffffffff811cd680>] vfs_fallocate+0x140/0x260
[<ffffffff811ce6f8>] SyS_fallocate+0x48/0x80
[<ffffffff81ddec09>] system_call_fastpath+0x12/0x17
The tracepoint that indicates the extent that triggered the assert
failure is:
xfs_iext_insert: idx 0 offset 0 block 16777224 count 2097152 flag 1
Clearly indicating that the extent length is greater than MAXEXTLEN,
which is 2097151. A prior trace point shows the allocation was an
exact size match and that a length greater than MAXEXTLEN was asked
for:
xfs_alloc_size_done: agno 1 agbno 8 minlen 2097152 maxlen 2097152
^^^^^^^ ^^^^^^^
We don't see this problem with extent size hints through the IO path
because we can't do single IOs large enough to trigger MAXEXTLEN
allocation. fallocate(), OTOH, is not limited in it's allocation
sizes and so needs help here.
The issue is that the extent size hint alignment is rounding up the
extent size past MAXEXTLEN, because xfs_bmapi_write() is not taking
into account extent size hints when calculating the maximum extent
length to allocate. xfs_bmapi_reserve_delalloc() is already doing
this, but direct extent allocation is not.
Unfortunately, the calculation in xfs_bmapi_reserve_delalloc() is
wrong, and it works only because delayed allocation extents are not
limited in size to MAXEXTLEN in the in-core extent tree. hence this
calculation does not work for direct allocation, and the delalloc
code needs fixing. This may, in fact be the underlying bug that
occassionally causes transaction overruns in delayed allocation
extent conversion, so now we know it's wrong we should fix it, too.
Many thanks to Brian Foster for finding this problem during review
of this patch.
Hence the fix, after much code reading, is to allow
xfs_bmap_extsize_align() to align partial extents when full
alignment would extend the alignment past MAXEXTLEN. We can safely
do this because all callers have higher layer allocation loops that
already handle short allocations, and so will simply run another
allocation to cover the remainder of the requested allocation range
that we ignored during alignment. The advantage of this approach is
that it also removes the need for callers to do anything other than
limit their requests to MAXEXTLEN - they don't really need to be
aware of extent size hints at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Because the counters use a custom batch size, the comparison
functions need to be aware of that batch size otherwise the
comparison does not work correctly. This leads to ASSERT failures
on generic/027 like this:
XFS: Assertion failed: 0, file: fs/xfs/xfs_mount.c, line: 1099
------------[ cut here ]------------
....
Call Trace:
[<ffffffff81522a39>] xfs_mod_icount+0x99/0xc0
[<ffffffff815285cb>] xfs_trans_unreserve_and_mod_sb+0x28b/0x5b0
[<ffffffff8152f941>] xfs_log_commit_cil+0x321/0x580
[<ffffffff81528e17>] xfs_trans_commit+0xb7/0x260
[<ffffffff81503d4d>] xfs_bmap_finish+0xcd/0x1b0
[<ffffffff8151da41>] xfs_inactive_ifree+0x1e1/0x250
[<ffffffff8151dbe0>] xfs_inactive+0x130/0x200
[<ffffffff81523a21>] xfs_fs_evict_inode+0x91/0xf0
[<ffffffff811f3958>] evict+0xb8/0x190
[<ffffffff811f433b>] iput+0x18b/0x1f0
[<ffffffff811e8853>] do_unlinkat+0x1f3/0x320
[<ffffffff811d548a>] ? filp_close+0x5a/0x80
[<ffffffff811e999b>] SyS_unlinkat+0x1b/0x40
[<ffffffff81e0892e>] system_call_fastpath+0x12/0x71
This is a regression introduced by commit 501ab32 ("xfs: use generic
percpu counters for inode counter").
This patch fixes the same problem for both the inode counter and the
free block counter in the superblocks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS uses non-stanard batch sizes for avoiding frequent global
counter updates on it's allocated inode counters, as they increment
or decrement in batches of 64 inodes. Hence the standard percpu
counter batch of 32 means that the counter is effectively a global
counter. Currently Xfs uses a batch size of 128 so that it doesn't
take the global lock on every single modification.
However, Xfs also needs to compare accurately against zero, which
means we need to use percpu_counter_compare(), and that has a
hard-coded batch size of 32, and hence will spuriously fail to
detect when it is supposed to use precise comparisons and hence
the accounting goes wrong.
Add __percpu_counter_compare() to take a custom batch size so we can
use it sanely in XFS and factor percpu_counter_compare() to use it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Function percpu_counter_read just return the current counter, which can be
negative. This will cause the checking of "allocated inode
counts <= m_maxicount" false positive. Use percpu_counter_read_positive can
solve this problem, and be consistent with the purpose to introduce percpu
mechanism to xfs.
Signed-off-by: George Wang <xuw2015@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch fixes allmodconfig, which fails to build due to
missing dma_alloc_attrs() and dma_free_attrs() functions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RgB9
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20150526' of git://github.com/czankel/xtensa-linux
Pull Xtensa fix from Chris Zankel:
"This fixes allmodconfig, which fails to build due to missing
dma_alloc_attrs() and dma_free_attrs() functions"
* tag 'xtensa-20150526' of git://github.com/czankel/xtensa-linux:
xtensa: Provide dummy dma_alloc_attrs() and dma_free_attrs()
We have that bug for years and some users report side effects when fixing it on older hardware.
So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When headphone mic boost is above zero, some 10 - 20 second delay
might occur before the headphone mic is operational.
Therefore disable the headphone mic boost control (recording gain is
sufficient even without it).
(Note: this patch is not about the headset mic, it's about the less
common mic-in only mode.)
BugLink: https://bugs.launchpad.net/bugs/1454235
Suggested-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A recent change removed the need for locking around writing
to "sync_action" (and various other places), but introduced a
subtle race.
When e.g. setting 'reshape' on a 'frozen' array, the 'frozen'
flag is cleared before 'reshape' is set, so the md thread can
get in and start trying recovery - which isn't wanted.
So instead of clearing MD_RECOVERY_FROZEN for any command
except 'frozen', only clear it when each specific command
is parsed. This allows the handling of 'reshape' to clear
the bit while a lock is held.
Also remove some places where we set MD_RECOVERY_NEEDED,
as it is always set on non-error exit of the function.
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: 6791875e2e ("md: make reconfig_mutex optional for writes to md sysfs files.")
Now that the code in break_stripe_batch_list() is nearly identical
to the end of handle_stripe_clean_event, replace the later
with a function call.
The only remaining difference of any interest is the masking that is
applieds to dev[i].flags copied from head_sh.
R5_WriteError certainly isn't wanted as it is set per-stripe, not
per-patch. R5_Overlap isn't wanted as it is explicitly handled.
Signed-off-by: NeilBrown <neilb@suse.de>
When a batch of stripes is broken up, we keep some of the flags
that were per-stripe, and copy other flags from the head to all
others.
This only happens while a stripe is being handled, so many of the
flags are irrelevant.
The "SYNC_FLAGS" (which I've renamed to make it clear there are
several) and STRIPE_DEGRADED are set per-stripe and so need to be
preserved. STRIPE_INSYNC is the only flag that is set on the head
that needs to be propagated to all others.
For safety, add a WARN_ON if others are set, except:
STRIPE_HANDLE - this is safe and per-stripe and we are going to set
in several cases anyway
STRIPE_INSYNC
STRIPE_IO_STARTED - this is just a hint and doesn't hurt.
STRIPE_ON_PLUG_LIST
STRIPE_ON_RELEASE_LIST - It is a point pointless for a batched
stripe to be on one of these lists, but it can happen
as can be safely ignored.
Signed-off-by: NeilBrown <neilb@suse.de>
When we break a stripe_batch_list we sometimes want to set
STRIPE_HANDLE on the individual stripes, and sometimes not.
So pass a 'handle_flags' arg. If it is zero, always set STRIPE_HANDLE
(on non-head stripes). If not zero, only set it if any of the given
flags are present.
Signed-off-by: NeilBrown <neilb@suse.de>
break_stripe_batch list didn't clear head_sh->batch_head.
This was probably a bug.
Also clear all R5_Overlap flags and if any were cleared, wake up
'wait_for_overlap'.
This isn't always necessary but the worst effect is a little
extra checking for code that is waiting on wait_for_overlap.
Also, don't use wake_up_nr() because that does the wrong thing
if 'nr' is zero, and it number of flags cleared doesn't
strongly correlate with the number of threads to wake.
Signed-off-by: NeilBrown <neilb@suse.de>
handle_stripe_clean_event() contains a chunk of code very
similar to check_break_stripe_batch_list().
If we make the latter more like the former, we can end up
with just one copy of this code.
This first step removed the condition (and the 'check_') part
of the name. This has the added advantage of making it clear
what check is being performed at the point where the function is
called.
Signed-off-by: NeilBrown <neilb@suse.de>
If a stripe is a member of a batch, but not the head, it must
not be handled separately from the rest of the batch.
'clear_batch_ready()' handles this requirement to some
extent but not completely. If a member is passed to handle_stripe()
a second time it returns '0' indicating the stripe can be handled,
which is wrong.
So add an extra test.
Signed-off-by: NeilBrown <neilb@suse.de>
da91309e0a (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
When we add a write to a stripe we need to make sure the bitmap
bit is set. While doing that the stripe is not locked so it could
be added to a batch after which further changes to STRIPE_BIT_DELAY
and ->bm_seq are ineffective.
So we need to hold off adding to a stripe until bitmap_startwrite has
completed at least once, and we need to avoid further changes to
STRIPE_BIT_DELAY once the stripe has been added to a batch.
If a bitmap_startwrite() completes after the stripe was added to a
batch, it will not have set the bit, only incremented a counter, so no
extra delay of the stripe is needed.
Reported-by: Shaohua Li <shli@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
