Commit graph

998441 commits

Author SHA1 Message Date
Josef Bacik
64708539cd btrfs: use btrfs_inode_lock/btrfs_inode_unlock inode lock helpers
A few places we intermix btrfs_inode_lock with a inode_unlock, and some
places we just use inode_lock/inode_unlock instead of btrfs_inode_lock.

None of these places are using this incorrectly, but as we adjust some
of these callers it would be nice to keep everything consistent, so
convert everybody to use btrfs_inode_lock/btrfs_inode_unlock.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:15 +02:00
Josef Bacik
8318ba79ee btrfs: add a i_mmap_lock to our inode
We need to be able to exclude page_mkwrite from happening concurrently
with certain operations.  To facilitate this, add a i_mmap_lock to our
inode, down_read() it in our mkwrite, and add a new ILOCK flag to
indicate that we want to take the i_mmap_lock as well.  I used pahole to
check the size of the btrfs_inode, the sizes are as follows

no lockdep:
before: 1120 (3 per 4k page)
after: 1160 (3 per 4k page)

lockdep:
before: 2072 (1 per 4k page)
after: 2224 (1 per 4k page)

We're slightly larger but it doesn't change how many objects we can fit
per page.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:15 +02:00
Goldwyn Rodrigues
5e295768a0 btrfs: remove mirror argument from btrfs_csum_verify_data()
The parameter mirror is not used and does not make sense for checksum
verification of the given bio.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:15 +02:00
Goldwyn Rodrigues
6e65ae7629 btrfs: remove force argument from run_delalloc_nocow()
force_cow can be calculated from inode and does not need to be passed as
an argument.

This simplifies run_delalloc_nocow() call from btrfs_run_delalloc_range()
A new function, should_nocow() checks if the range should be NOCOWed or
not. The function returns true iff either BTRFS_INODE_NODATA or
BTRFS_INODE_PREALLOC, but is not a defrag extent.

Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:15 +02:00
Nikolay Borisov
d6ade6894e btrfs: don't opencode extent_changeset_free
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:15 +02:00
Jiapeng Chong
7000babdda btrfs: assign proper values to a bool variable in dev_extent_hole_check_zoned
Fix the following coccicheck warnings:

./fs/btrfs/volumes.c:1462:10-11: WARNING: return of 0/1 in function
'dev_extent_hole_check_zoned' with return type bool.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:15 +02:00
Filipe Manana
2ce73c6335 btrfs: add btree read ahead for incremental send operations
Currently we do not do btree read ahead when doing an incremental send,
however we know that we will read and process any node or leaf in the
send root that has a generation greater than the generation of the parent
root. So triggering read ahead for such nodes and leafs is beneficial
for an incremental send.

This change does that, triggers read ahead of any node or leaf in the
send root that has a generation greater then the generation of the
parent root. As for the parent root, no readahead is triggered because
knowing in advance which nodes/leaves are going to be read is not so
linear and there's often a large time window between visiting nodes or
leaves of the parent root. So I opted to leave out the parent root,
and triggering read ahead for its nodes/leaves seemed to have not made
significant difference.

The following test script was used to measure the improvement on a box
using an average, consumer grade, spinning disk and with 16GiB of ram:

  $ cat test.sh
  #!/bin/bash

  DEV=/dev/sdj
  MNT=/mnt/sdj
  MKFS_OPTIONS="--nodesize 16384"     # default, just to be explicit
  MOUNT_OPTIONS="-o max_inline=2048"  # default, just to be explicit

  mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null
  mount $MOUNT_OPTIONS $DEV $MNT

  # Create files with inline data to make it easier and faster to create
  # large btrees.
  add_files()
  {
      local total=$1
      local start_offset=$2
      local number_jobs=$3
      local total_per_job=$(($total / $number_jobs))

      echo "Creating $total new files using $number_jobs jobs"
      for ((n = 0; n < $number_jobs; n++)); do
          (
              local start_num=$(($start_offset + $n * $total_per_job))
              for ((i = 1; i <= $total_per_job; i++)); do
                  local file_num=$((start_num + $i))
                  local file_path="$MNT/file_${file_num}"
                  xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null
                  if [ $? -ne 0 ]; then
                      echo "Failed creating file $file_path"
                      break
                  fi
              done
          ) &
          worker_pids[$n]=$!
      done

      wait ${worker_pids[@]}

      sync
      echo
      echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)"
  }

  initial_file_count=500000
  add_files $initial_file_count 0 4

  echo
  echo "Creating first snapshot..."
  btrfs subvolume snapshot -r $MNT $MNT/snap1

  echo
  echo "Adding more files..."
  add_files $((initial_file_count / 4)) $initial_file_count 4

  echo
  echo "Updating 1/50th of the initial files..."
  for ((i = 1; i < $initial_file_count; i += 50)); do
      xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null
  done

  echo
  echo "Creating second snapshot..."
  btrfs subvolume snapshot -r $MNT $MNT/snap2

  umount $MNT

  echo 3 > /proc/sys/vm/drop_caches
  blockdev --flushbufs $DEV &> /dev/null
  hdparm -F $DEV &> /dev/null

  mount $MOUNT_OPTIONS $DEV $MNT

  echo
  echo "Testing full send..."
  start=$(date +%s)
  btrfs send $MNT/snap1 > /dev/null
  end=$(date +%s)
  echo
  echo "Full send took $((end - start)) seconds"

  umount $MNT

  echo 3 > /proc/sys/vm/drop_caches
  blockdev --flushbufs $DEV &> /dev/null
  hdparm -F $DEV &> /dev/null

  mount $MOUNT_OPTIONS $DEV $MNT

  echo
  echo "Testing incremental send..."
  start=$(date +%s)
  btrfs send -p $MNT/snap1 $MNT/snap2 > /dev/null
  end=$(date +%s)
  echo
  echo "Incremental send took $((end - start)) seconds"

  umount $MNT

Before this change, incremental send duration:

  with $initial_file_count == 200000:  51 seconds
  with $initial_file_count == 500000: 168 seconds

After this change, incremental send duration:

  with $initial_file_count == 200000:   39 seconds (-26.7%)
  with $initial_file_count == 500000:  125 seconds (-29.4%)

For $initial_file_count == 200000 there are 62600 nodes and leaves in the
btree of the first snapshot, and 77759 nodes and leaves in the btree of
the second snapshot. The root nodes were at level 2.

While for $initial_file_count == 500000 there are 152476 nodes and leaves
in the btree of the first snapshot, and 190511 nodes and leaves in the
btree of the second snapshot. The root nodes were at level 2 as well.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:15 +02:00
Filipe Manana
19358b154f btrfs: add btree read ahead for full send operations
When doing a full send we know that we are going to be reading every node
and leaf of the send root, so we benefit from enabling read ahead for the
btree.

This change enables read ahead for full send operations only, incremental
sends will have read ahead enabled in a different way by a separate patch.

The following test script was used to measure the improvement on a box
using an average, consumer grade, spinning disk and with 16GiB of RAM:

  $ cat test.sh
  #!/bin/bash

  DEV=/dev/sdj
  MNT=/mnt/sdj
  MKFS_OPTIONS="--nodesize 16384"     # default, just to be explicit
  MOUNT_OPTIONS="-o max_inline=2048"  # default, just to be explicit

  mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null
  mount $MOUNT_OPTIONS $DEV $MNT

  # Create files with inline data to make it easier and faster to create
  # large btrees.
  add_files()
  {
      local total=$1
      local start_offset=$2
      local number_jobs=$3
      local total_per_job=$(($total / $number_jobs))

      echo "Creating $total new files using $number_jobs jobs"
      for ((n = 0; n < $number_jobs; n++)); do
          (
              local start_num=$(($start_offset + $n * $total_per_job))
              for ((i = 1; i <= $total_per_job; i++)); do
                  local file_num=$((start_num + $i))
                  local file_path="$MNT/file_${file_num}"
                  xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null
                  if [ $? -ne 0 ]; then
                      echo "Failed creating file $file_path"
                      break
                  fi
              done
          ) &
          worker_pids[$n]=$!
      done

      wait ${worker_pids[@]}

      sync
      echo
      echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)"
  }

  initial_file_count=500000
  add_files $initial_file_count 0 4

  echo
  echo "Creating first snapshot..."
  btrfs subvolume snapshot -r $MNT $MNT/snap1

  echo
  echo "Adding more files..."
  add_files $((initial_file_count / 4)) $initial_file_count 4

  echo
  echo "Updating 1/50th of the initial files..."
  for ((i = 1; i < $initial_file_count; i += 50)); do
      xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null
  done

  echo
  echo "Creating second snapshot..."
  btrfs subvolume snapshot -r $MNT $MNT/snap2

  umount $MNT

  echo 3 > /proc/sys/vm/drop_caches
  blockdev --flushbufs $DEV &> /dev/null
  hdparm -F $DEV &> /dev/null

  mount $MOUNT_OPTIONS $DEV $MNT

  echo
  echo "Testing full send..."
  start=$(date +%s)
  btrfs send $MNT/snap1 > /dev/null
  end=$(date +%s)
  echo
  echo "Full send took $((end - start)) seconds"

  umount $MNT

  echo 3 > /proc/sys/vm/drop_caches
  blockdev --flushbufs $DEV &> /dev/null
  hdparm -F $DEV &> /dev/null

  mount $MOUNT_OPTIONS $DEV $MNT

  echo
  echo "Testing incremental send..."
  start=$(date +%s)
  btrfs send -p $MNT/snap1 $MNT/snap2 > /dev/null
  end=$(date +%s)
  echo
  echo "Incremental send took $((end - start)) seconds"

  umount $MNT

Before this change, full send duration:

  with $initial_file_count == 200000:  165 seconds
  with $initial_file_count == 500000:  407 seconds

After this change, full send duration:

  with $initial_file_count == 200000:  149 seconds (-10.2%)
  with $initial_file_count == 500000:  353 seconds (-14.2%)

For $initial_file_count == 200000 there are 62600 nodes and leaves in the
btree of the first snapshot, while for $initial_file_count == 500000 there
are 152476 nodes and leaves. The roots were at level 2.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:15 +02:00
Nikolay Borisov
98686ffc71 btrfs: simplify code flow in btrfs_delayed_inode_reserve_metadata
btrfs_block_rsv_add can return only ENOSPC since it's called with
NO_FLUSH modifier. This so simplify the logic in
btrfs_delayed_inode_reserve_metadata to exploit this invariant.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add assert and comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:15 +02:00
Nikolay Borisov
8e3c9d3cf8 btrfs: remove btrfs_inode parameter from btrfs_delayed_inode_reserve_metadata
It's only used for tracepoint to obtain the inode number, but we already
have the ino from btrfs_delayed_node::inode_id.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:14 +02:00
Nikolay Borisov
ae396a3b7a btrfs: simplify commit logic in try_flush_qgroup
It's no longer expected to call this function with an open transaction
so all the workarounds concerning this can be removed. In fact it'll
constitute a bug to call this function with a transaction already held
so WARN in this case.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:14 +02:00
Anand Jain
e5ce988690 btrfs: scrub: drop a few function declarations
Drop function declarations at the beginning of the file scrub.c. These
functions are defined before they are used in the same file and don't
need forward declaration.

No functional changes.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:14 +02:00
Anand Jain
f4639636b6 btrfs: change return type to bool in btrfs_extent_readonly
btrfs_extent_readonly() checks if the block group is readonly, the bool
return type should be used.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:14 +02:00
Anand Jain
05947ae186 btrfs: unexport btrfs_extent_readonly() and make it static
btrfs_extent_readonly() is used by can_nocow_extent() in inode.c. So
move it from extent-tree.c to inode.c and declare it as static.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:14 +02:00
Nikolay Borisov
b6e9f16c5f btrfs: replace open coded while loop with proper construct
btrfs_inc_block_group_ro wants to ensure that the current transaction is
not running dirty block groups, if it is it waits and loops again.
That logic is currently implemented using a goto label. Actually using
a proper do {} while() construct doesn't hurt readability nor does it
introduce excessive nesting and makes the relevant code stand out by
being encompassed in the loop construct. No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:14 +02:00
Nikolay Borisov
20bbf20e95 btrfs: replace offset_in_entry with in_range
No point in duplicating the functionality just use the generic helper
that has the same semantics.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:14 +02:00
Nikolay Borisov
cca5de97ae btrfs: make find_desired_extent take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:14 +02:00
Nikolay Borisov
bfc78479eb btrfs: make btrfs_replace_file_extents take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:14 +02:00
Qu Wenruo
0b3dcd131d btrfs: fix comment for btrfs ordered extent flag bits
There is small error in comment about BTRFS_ORDERED_* flags, added in
commit 3c198fe064 ("btrfs: rework the order of
btrfs_ordered_extent::flags") but the fixup did not get merged in time.

The 4 types are for ordered extent itself, not for direct io.
Only 3 types support direct io, REGULAR/NOCOW/PREALLOC.

Fix the comment to reflect that.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:14 +02:00
Linus Torvalds
bf05bf16c7 Linux 5.12-rc8 2021-04-18 14:45:32 -07:00
Linus Torvalds
5ffe04ccd6 ARM SoC fixes for v5.12, part 2
Another smaller set of fixes for three of the Arm platforms:
 
 TI OMAP:
 
     Fix swapped mmc device order also for omap3 that got changed with the
     recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases
     should be board specific, all the mmc device instances are all there in
     the SoC, and we do probe them by default so that PM runtime can idle the
     devices if left enabled from the bootloader.
 
 Qualcomm Snapdragon:
 
     This bypasses the, recently introduced, interconnect handling in the
     GENI (serial engine) driver when running off ACPI, as this causes the
     GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard
     and touchpad.
 
 Allwinner:
 
     One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine,
     some MAINTAINERS maintainance, and a clk / reset switch to our headers.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmB8hfwACgkQmmx57+YA
 GNn5QA//TBcW23bLfjYI8kPl7yJ9KSD6UdNGHXYizJry5hAoyLhvCVSq6quPmAPy
 psempGKQBYiRb0Ftewc2+v00u4XdOTxqFw2MDs6UoladfiqyYfkEJxPgXG/k0msJ
 gGIOT5ysDeRiqNAFND0wO6z/wPmlgJl37yTztOrbghWwYLvwlUkqsXzJ9B72FCzM
 MGwrv1LZfEiljuaJAT+nVNkStKxCxSWjzIvYMgC/K9xbAjjtJNZby2tNJObMiARe
 d3G2nGYmo414eQGNb+SDBx5h4aPZGR0ZxdLbzhAFrdw+uUzwlnJ1ufJQnEr6CXql
 4MziHYWRYOAF90uLVeWiH8ZEh/CbxdnenmYCooOj+LAkn6IHAErRlFeZAfjWnckh
 pwcdeebk4SQ9SNDPIWwwVYKVeGtnMM7q8HucDulMRxYmDL5sTprMhJVwxXbshivw
 dnYWzV86FUIOgegUyFgzPKSTVqHbG68dxz2yRhR8yP56pTLnzh/lsB+0DmtiHcIx
 O8chRnvtJib5/XspF6CVXqWYDrvIR5L8h7JMbSU/IetADJwQyEYz9CVh/DyNuiJQ
 +oZY8Xqt3NzC9xOP/pTP6NFDYsVvKwsQRdwT3CBoV7lEM9X4wEypHOR+QmvO8q8m
 AhddgIhx3P7olKnKgylPXS0kjQ3AuBarmnUMI9eaS2tHO2n5z/Y=
 =f2ly
 -----END PGP SIGNATURE-----

Merge tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Another smaller set of fixes for three of the Arm platforms:

  TI OMAP:

     Fix swapped mmc device order also for omap3 that got changed with
     the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the
     aliases should be board specific, all the mmc device instances are
     all there in the SoC, and we do probe them by default so that PM
     runtime can idle the devices if left enabled from the bootloader.

  Qualcomm Snapdragon:

     This bypasses the recently introduced interconnect handling in
     the GENI (serial engine) driver when running off ACPI, as this
     causes the GENI probe to fail and the Lenovo Yoga C630 to boot
     without keyboard and touchpad.

  Allwinner:

     One 32kHz clock fix for the beelink gs1, a CD polarity fix for the
     SoPine, some MAINTAINERS maintainance, and a clk / reset switch to
     our headers"

* tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
  MAINTAINERS: Match on allwinner keyword
  MAINTAINERS: Add our new mailing-list
  arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
  arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
  ARM: OMAP2+: Fix uninitialized sr_inst
  ARM: dts: Fix swapped mmc order for omap3
  ARM: OMAP2+: Fix warning for omap_init_time_of()
  soc: qcom: geni: shield geni_icc_get() for ACPI boot
2021-04-18 13:23:26 -07:00
Linus Torvalds
f5ce0466dc ARM fixes for 5.12:
- Halve maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled
 - Fix conversion for_each_membock() to for_each_mem_range()
 - Fix footbridge PCI mapping
 - Avoid uprobes hooking on thumb instructions
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmB8eFQACgkQ9OeQG+St
 rGSOeA//W7unQvu7fKda6PdewSk4S35Pz5EAPwFyisYg7HQEikfhBqlLQltM+JGk
 z8/NewqFUHjOdOStyBZgx8ZCecmABeRVQQ8yG8IEb4n8GkgagTrXEtmXT7iF0dZQ
 4S8PWbf/wgOQZ88xTRnpruIFqJZw8m4xbaQ64NbQM3f5rzMIFiuXdm84ZsUcGVWq
 xOCzXUcvwi8xSU0dSfp7iZ//ODE/2qs4qeQ8fTz5ZYmSQRctsGWHLnI6wbtUolFn
 gOu19QSkLaIh7iO+CoNvTsMQOm11hQGzyMhSix835zA9NX8K4yCvUT0ZRp6q2AI+
 D7gvkkng/VD9j25govHHqkJkqXn8KNIm+SQtm+9bTcx93FpQ3Iq0627zjIOamnmR
 7kGIRXL5YB8SPYpl62K8DGN05rZsb71a8lJ1sIsXrBSApB/p4H82UXEIqCWtgZGe
 ivOubX+X4LfLerAzwJ0w86Uh3TqFHUH61rswhJPuUFWHUw1lYgM3XnKBzJbYpQfo
 9xw2nXOGvQPdn8UgJ8fBhxqtPIOaVIIZY1olCal/yN5348r1U6YuYNbwfCQ68evl
 lr3x0m0MxeQE0Q1E0IltOpgCR8FxNYg62HfdAtQ/W+71hh37nP1JCvION3OdQJNR
 QNwyRRGsLwSChVPN+YBq347YBaOHr9CmYDYDaK2ucpEwd8l6ORQ=
 =LKyZ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - Halve maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled

 - Fix conversion for_each_membock() to for_each_mem_range()

 - Fix footbridge PCI mapping

 - Avoid uprobes hooking on thumb instructions

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9071/1: uprobes: Don't hook on thumb instructions
  ARM: footbridge: fix PCI interrupt mapping
  ARM: 9069/1: NOMMU: Fix conversion for_each_membock() to for_each_mem_range()
  ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled
2021-04-18 11:55:31 -07:00
Fredrik Strupe
d2f7eca60b ARM: 9071/1: uprobes: Don't hook on thumb instructions
Since uprobes is not supported for thumb, check that the thumb bit is
not set when matching the uprobes instruction hooks.

The Arm UDF instructions used for uprobes triggering
(UPROBE_SWBP_ARM_INSN and UPROBE_SS_ARM_INSN) coincidentally share the
same encoding as a pair of unallocated 32-bit thumb instructions (not
UDF) when the condition code is 0b1111 (0xf). This in effect makes it
possible to trigger the uprobes functionality from thumb, and at that
using two unallocated instructions which are not permanently undefined.

Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Cc: stable@vger.kernel.org
Fixes: c7edc9e326 ("ARM: add uprobes support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-04-18 19:14:45 +01:00
Linus Torvalds
c98ff1d013 SCSI fixes on 20210417
This libsas fix is for a problem that occurs when trying to change the
 cache type of an ATA device and the libiscsi one is a regression fix
 from this merge window.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYHuPRSYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisha52AQCXc8n0
 6VAjfc+8aCqjX2Hpw4YCGeW5RYoNj1WXhiDv/AD+L4FVBMdQ4DE9ukH12YW7YBRS
 qP03aNSHLCl8wfVon8Q=
 =Btn4
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two fixes: the libsas fix is for a problem that occurs when trying to
  change the cache type of an ATA device and the libiscsi one is a
  regression fix from this merge window"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libsas: Reset num_scatter if libata marks qc as NODATA
  scsi: iscsi: Fix iSCSI cls conn state
2021-04-17 20:25:33 -07:00
Linus Torvalds
aba5970c4d drm/vmwgfx fixes for 5.12-rc7
vmwgfx:
 - fixed unpinning before destruction
 - lockdep init reordering
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJge3NBAAoJEAx081l5xIa+U28P/04l35qKLMQhK3EwBZS1cyis
 bii8W0RKfAuWl7dEp53nEtHEHG+z0cDH+/RRDhXtr3NV+wCuDF7I8r+P1xn2P+Xy
 siWRBsbg5Mp3sH2UegpMrDwgl0uAV7mhkpMZJ08ASCVzsgLNBMiDiDPfDrbSA6ne
 yfV3n4Fv4VPdJwMhp33OYB5OYqDpIlgGsei5R0w9zrv7bKnX2193UW5qaVuAd6k2
 quKd0aGBATLm/BWBRL4pe1xgR7DJRFe4x4Tihn818tHe8gGaH2xvO6V5k894QlUM
 h5lk8xjLFqICj1kDuzmtZhNKU0iOK357NLcimxZYgSf5gXLLZsTwYCaFPAgEquX6
 s+q48J9hfo+1TkcMBRih4zpxsRnjaPRIvNmUE6pYgUiUtmJzE9eu/Jblll/keHzr
 4miyjiZHOiV8Q+WhpgLbJdPOdqNavxJj8BGCNQajMEQkzN7pZr4ilkhHYMNnslQO
 ug+ZqxWM6pPXvOMs/k+M4SOcPEaGcnxVZpAOL/DbtD8iPUlj9J6DkzL943rvpo+o
 pMBdEiVuVneJ03ev8IsAzKPID3UJJ0pmnlrZgJpkRpWWkoH75hHzG4Ps4zOAvUsa
 ykIY+lcf5GxI2hGVDnOUAfAm/URNooiDIhVc/rf8i5/UJBaK48ORfC8DeZw6r2Wq
 pLvZW1PKN/b+IYrOrl4n
 =nr7Z
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2021-04-18' of git://anongit.freedesktop.org/drm/drm

Pull vmwgfx fixes from Dave Airlie:
 "This contains two regression fixes for vmwgfx, one due to a refactor
  which meant locks were being used before initialisation, and the other
  in fixing up some warnings from the core when destroying pinned
  buffers.

  vmwgfx:

   - fixed unpinning before destruction

   - lockdep init reordering"

* tag 'drm-fixes-2021-04-18' of git://anongit.freedesktop.org/drm/drm:
  drm/vmwgfx: Make sure bo's are unpinned before putting them back
  drm/vmwgfx: Fix the lockdep breakage
  drm/vmwgfx: Make sure we unpin no longer needed buffers
2021-04-17 20:00:36 -07:00
Dave Airlie
796b556cbf vmwgfx fixes for regressions in 5.12
Here's a set of 3 patches fixing ugly regressions
 in the vmwgfx driver. We broke lock initialization
 code and ended up using spinlocks before initialization
 breaking lockdep.
 Also there was a bit of a fallout from drm changes
 which made the core validate that unreferenced buffers
 have been unpinned. vmwgfx pinning code predates a lot
 of the core drm and wasn't written to account for those
 semantics. Fortunately changes required to fix it
 are not too intrusive.
 The changes have been validated by our internal ci.
 
 Signed-off-by: Zack Rusin <zackr@vmware.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQHFBAABCgAvFiEEQfMqp0dj5HcMqHypdmlGesw5fx8FAmB3VVoRHHphY2tyQHZt
 d2FyZS5jb20ACgkQdmlGesw5fx/u9AwAhlJqpBH57xPv71rQC93GNg1P1OnIcYBE
 EfF65/cynVrbCvRdFI8J7sOMIcDR1Ny6E6vpkKvdKObugu/jSh4MFZgKNmcReNwa
 eK7c69LEigmZaZdeDeYgpS7GPkZ9fqBw4j+Y+hX0H/Djztf5Ghd6bGCwd6Z/clZW
 b6kJQDfzvDzU0McTyVBH1ctXGQHhKAbkDKie+mbWRJtdMLmvTJQltgIaXnYMqqZq
 /fknvD+IYh1pjCQz4g8/5Jn5ljmeuMB1BNhUaLhxHR2EaAZ0BvAXw+4urAezCWJf
 YGvZ3rMPfd7NNTvrPbrSa9uIpH9hgZcew6ZGyhHPdfjbp+WkgG4oDQsNwDjkUqws
 CQ+N/E8L2/2HTG0yOS5TSazUU2Omz9g2A50puKXhIrB/24baZlnyhbaExWH1Avi6
 hMFzKIxeCOaGOUXtdizeD+mF63tlBicS+bcHyon/GgwpfIZLhTbY5nCibWiFCb7t
 lGZOUAoJHqx34rI7PKGUU3xyD3+ha45H
 =ETTT
 -----END PGP SIGNATURE-----

Merge tag 'vmwgfx-fixes-2021-04-14' of gitlab.freedesktop.org:zack/vmwgfx into drm-fixes

vmwgfx fixes for regressions in 5.12

Here's a set of 3 patches fixing ugly regressions
in the vmwgfx driver. We broke lock initialization
code and ended up using spinlocks before initialization
breaking lockdep.
Also there was a bit of a fallout from drm changes
which made the core validate that unreferenced buffers
have been unpinned. vmwgfx pinning code predates a lot
of the core drm and wasn't written to account for those
semantics. Fortunately changes required to fix it
are not too intrusive.
The changes have been validated by our internal ci.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f7add0a2-162e-3bd2-b1be-344a94f2acbf@vmware.com
2021-04-18 09:27:00 +10:00
Linus Torvalds
194cf48256 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
 "One more driver bugfix for I2C"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mv64xxx: Fix random system lock caused by runtime PM
2021-04-17 12:01:51 -07:00
Linus Torvalds
0c93ac6940 readdir: make sure to verify directory entry for legacy interfaces too
This does the directory entry name verification for the legacy
"fillonedir" (and compat) interface that goes all the way back to the
dark ages before we had a proper dirent, and the readdir() system call
returned just a single entry at a time.

Nobody should use this interface unless you still have binaries from
1991, but let's do it right.

This came up during discussions about unsafe_copy_to_user() and proper
checking of all the inputs to it, as the networking layer is looking to
use it in a few new places.  So let's make sure the _old_ users do it
all right and proper, before we add new ones.

See also commit 8a23eb804c ("Make filldir[64]() verify the directory
entry filename is valid") which did the proper modern interfaces that
people actually use. It had a note:

    Note that I didn't bother adding the checks to any legacy interfaces
    that nobody uses.

which this now corrects.  Note that we really don't care about POSIX and
the presense of '/' in a directory entry, but verify_dirent_name() also
ends up doing the proper name length verification which is what the
input checking discussion was about.

[ Another option would be to remove the support for this particular very
  old interface: any binaries that use it are likely a.out binaries, and
  they will no longer run anyway since we removed a.out binftm support
  in commit eac6165570 ("x86: Deprecate a.out support").

  But I'm not sure which came first: getdents() or ELF support, so let's
  pretend somebody might still have a working binary that uses the
  legacy readdir() case.. ]

Link: https://lore.kernel.org/lkml/CAHk-=wjbvzCAhAtvG0d81W5o0-KT5PPTHhfJ5ieDFq+bGtgOYg@mail.gmail.com/
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-17 11:39:49 -07:00
Linus Torvalds
88a5af9439 Networking fixes for 5.12-rc8, including fixes from netfilter,
and bpf. BPF verifier changes stand out, otherwise things have
 slowed down.
 
 Current release - regressions:
 
  - gro: ensure frag0 meets IP header alignment
 
  - Revert "net: stmmac: re-init rx buffers when mac resume back"
 
  - ethernet: macb: fix the restore of cmp registers
 
 Previous releases - regressions:
 
  - ixgbe: Fix NULL pointer dereference in ethtool loopback test
 
  - ixgbe: fix unbalanced device enable/disable in suspend/resume
 
  - phy: marvell: fix detection of PHY on Topaz switches
 
  - make tcp_allowed_congestion_control readonly in non-init netns
 
  - xen-netback: Check for hotplug-status existence before watching
 
 Previous releases - always broken:
 
  - bpf: mitigate a speculative oob read of up to map value size by
         tightening the masking window
 
  - sctp: fix race condition in sctp_destroy_sock
 
  - sit, ip6_tunnel: Unregister catch-all devices
 
  - netfilter: nftables: clone set element expression template
 
  - netfilter: flowtable: fix NAT IPv6 offload mangling
 
  - net: geneve: check skb is large enough for IPv4/IPv6 header
 
  - netlink: don't call ->netlink_bind with table lock held
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmB6aBQACgkQMUZtbf5S
 Iruu2BAAqHKdB5Qd1iBGaA1md8f+elErsotzjONz+eh2yqDKRaOW84+Fo9TPKgu6
 se0WmAY1HMUO3TEVdFeBsrgrs+bTY1E1OdfoZ39PFNkMdKMM80Ks1rn94nrPOohy
 q1uoNxe9jjT3nRQBTKHWdB3ZC3Jetwf3LP7G2b8SoA+gNd9xl+b1H/drmv7WdE/n
 pY7/GND7wd4qqidLRDgAaavaiGIdqym8V0bZEpz7cZtjT/U6RhjkBLKSB8JFGUxP
 PQ1NFrYKmLDM1zYTSObLOrKUmEaWzPPSsXmWqGkCE4qjJ8euX0e+5EbxF98JHdYW
 O+HMtdgr4UJGWAoxyGaxk7h9w0ydVyC1+Xgi6jAFWdXP7wgvXXQrldLnO44pX/6I
 dYlIM+Br/5VmnKiS1i1gBUURREBRSEy7ZYxtREjGC7dFSUn9RPm+0s0x/DCRBS9/
 MtNo0lCiuWsyaZ2v57aEKLX4YvGpilzg4UU3/45RNW6OnFzQubvjMBJPfap6EUAC
 Ii8uUc/vX0Jq4nZVZzDZ7vlkRcJTQgUqKrzgamUuwJmyPqzefkDcbSZub3tM8G39
 eetiHS1nqe3QwuP+TYM3MaBjw0bdgNz9Wt3xmY3Ehnf3pujMR5fbAsCbcdowV5/+
 OI2ZcTUZculeAW2q9DgsOCtyS/1huwMHG0zO32TgadbFv45UCS0=
 =LN+J
 -----END PGP SIGNATURE-----

Merge tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.12-rc8, including fixes from netfilter, and
  bpf. BPF verifier changes stand out, otherwise things have slowed
  down.

  Current release - regressions:

   - gro: ensure frag0 meets IP header alignment

   - Revert "net: stmmac: re-init rx buffers when mac resume back"

   - ethernet: macb: fix the restore of cmp registers

  Previous releases - regressions:

   - ixgbe: Fix NULL pointer dereference in ethtool loopback test

   - ixgbe: fix unbalanced device enable/disable in suspend/resume

   - phy: marvell: fix detection of PHY on Topaz switches

   - make tcp_allowed_congestion_control readonly in non-init netns

   - xen-netback: Check for hotplug-status existence before watching

  Previous releases - always broken:

   - bpf: mitigate a speculative oob read of up to map value size by
     tightening the masking window

   - sctp: fix race condition in sctp_destroy_sock

   - sit, ip6_tunnel: Unregister catch-all devices

   - netfilter: nftables: clone set element expression template

   - netfilter: flowtable: fix NAT IPv6 offload mangling

   - net: geneve: check skb is large enough for IPv4/IPv6 header

   - netlink: don't call ->netlink_bind with table lock held"

* tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
  netlink: don't call ->netlink_bind with table lock held
  MAINTAINERS: update my email
  bpf: Update selftests to reflect new error states
  bpf: Tighten speculative pointer arithmetic mask
  bpf: Move sanitize_val_alu out of op switch
  bpf: Refactor and streamline bounds check into helper
  bpf: Improve verifier error messages for users
  bpf: Rework ptr_limit into alu_limit and add common error path
  bpf: Ensure off_reg has no mixed signed bounds for all types
  bpf: Move off_reg into sanitize_ptr_alu
  bpf: Use correct permission flag for mixed signed bounds arithmetic
  ch_ktls: do not send snd_una update to TCB in middle
  ch_ktls: tcb close causes tls connection failure
  ch_ktls: fix device connection close
  ch_ktls: Fix kernel panic
  i40e: fix the panic when running bpf in xdpdrv mode
  net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta
  net/mlx5e: Fix setting of RS FEC mode
  net/mlx5: Fix setting of devlink traps in switchdev mode
  Revert "net: stmmac: re-init rx buffers when mac resume back"
  ...
2021-04-17 09:57:15 -07:00
Linus Torvalds
bdfd99e6d6 libnvdimm fixes for v5.12-rc8
- Fix a regression of read-only handling in the pmem driver.
 
 - Fix a compile warning.
 
 - Fix support for platform cache flush commands on powerpc/papr
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEf41QbsdZzFdA8EfZHtKRamZ9iAIFAmB6UwwACgkQHtKRamZ9
 iAJRbg//a/JsvdhuqiM6y/ZbdwMqf1Iwl+OwAhX5BDdGl+IibN6BacAPrau1ba7c
 Kww2lbk5E2OrNz71eVdpJZTTTI3Q0/Zrw95e8CBjyHNw+r5ROisrqKVmqnCYhhHQ
 GI0JitZbQouXnHUxFpF4rEXmVOQMjlR87f2unAbQL3H6lm5NIAj4lzvBJUc4HR/6
 SJVbLdRfNc2vxQm8WnUZzGBKox8fseQ0gK7a5MGGhjJSkqqtIb4LUNKh7XD4nXs+
 ELD7i11TFuHiwh7aycm0lqC3EICw3OtyhOlOwBF7sVvIKSGnt+w4zk1BkkU7/zTx
 CwaGJFcof9uPQLOShbV2JLaUxPGq9Pmt7gMGhVBqC4uQxLCjdoMadohpE163TCZZ
 r8jerU+zZGrKw3fJxkFL5FiIMKwtkfvt8l1YAHg4L1KQuUBnjO47bu1Oe+E0WCl8
 T41jw6bQkhWehnluPVFZxXDt1/uKC3xM7bUipULG/ou76QO4oHxNpZewv3cbblWR
 IQVn1VVRkS+qBjF0JTFbyFqRy8Ip/AbaKlMO3exf3hKP2YBWDa34qXCTA1RDqkCS
 kJVFTYhc3cxgo9g0g79K2ly6kfmrLkk3QB12ZIUvl/yjOCNowbr0nsxtSgLgVku8
 XpLy6rVbI5Ds9P6tL0kiEz5FYtHJdwRfrUP3lFteVJ0VJGw0lCc=
 =L0d1
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "The largest change is for a regression that landed during -rc1 for
  block-device read-only handling. Vaibhav found a new use for the
  ability (originally introduced by virtio_pmem) to call back to the
  platform to flush data, but also found an original bug in that
  implementation. Lastly, Arnd cleans up some compile warnings in dax.

  This has all appeared in -next with no reported issues.

  Summary:

   - Fix a regression of read-only handling in the pmem driver

   - Fix a compile warning

   - Fix support for platform cache flush commands on powerpc/papr"

* tag 'libnvdimm-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC
  libnvdimm: Notify disk drivers to revalidate region read-only
  dax: avoid -Wempty-body warnings
2021-04-17 09:40:44 -07:00
Linus Torvalds
7c22677407 cxl for 5.12-rc8
- Fix support for CXL memory devices with registers offset from the BAR
   base.
 
 - Fix the reporting of device capacity.
 
 - Fix the driver commands list definition to be disconnected from the
   UAPI command list.
 
 - Replace percpu_ref with rwsem to fix initialization error path.
 
 - Fix leaks in the driver initialization error path.
 
 - Drop the power/ directory from CXL device sysfs.
 
 - Use the recommended sysfs helper for attribute 'show' implementations.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEf41QbsdZzFdA8EfZHtKRamZ9iAIFAmB6TpMACgkQHtKRamZ9
 iAIrLBAAsmxYIItUvSP9OSkRTv/UHkk4swVef1nsaNpf+yOhpXMCXwmNkphlBFUL
 aD4fHyCPrDDHoFfUZY7sovq+KCEqcCD47qMdaS/E1VlEAsrKfsbCyKoJk54TJ0SK
 IDMB367LGN+wKAZl94hLFDcSW8bXq79swqB4AW1W2wXJKkJrzodh+IwUA7mJhV3g
 05GQ3Is+brIkZ7iwho/50KEteswXu5jQXfFR3fzHXbevnKq6Aom7Iud4grEP9ztR
 xqgw/exJXNrrIymxyFz3uQy5WRr53U/YzNuxPHYJPoKxOOCc++kjlk+wKBsAcvGt
 ZiBA8VkBBWBHVDYrKQ/KfkHZYT/gUB+5Nj6jTx1h0VkALq17wD15NA2uokSV0oFe
 sFpZsTqQCI1/PoyUMWjF4FrftrfIqCBNCbtkI5A0JOzL6d5/YZPnGu/KyxbK/FpI
 qUDPzyxSfPnODKq6j359zvT6HYi4uf2AyCskJS0DDS1lZGoWlVb23RNP8lPv9rhF
 UhFzdNvbwRr82Am9jZJ0R9RaF1eyTKC0GOC/KEOxZOofEPJ9fKqG9sbhoJK06tAM
 +vfyw49tMN1+7fxEBrlggYlD6h2BIZD6+vN7hqOWdQWqSpS5/lwafKqM+bL1IEi+
 BwhrdEsHp/0z0/Qhqos7DmdTghF0AVdxjc/TdtZ3Y8d+BNSfR0g=
 =Nh/e
 -----END PGP SIGNATURE-----

Merge tag 'cxl-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull CXL memory class fixes from Dan Williams:
 "A collection of fixes for the CXL memory class driver introduced in
  this release cycle.

  The driver was primarily developed on a work-in-progress QEMU
  emulation of the interface and we have since found a couple places
  where it hid spec compliance bugs in the driver, or had a spec
  implementation bug itself.

  The biggest change here is replacing a percpu_ref with an rwsem to
  cleanup a couple bugs in the error unwind path during ioctl device
  init. Lastly there were some minor cleanups to not export the
  power-management sysfs-ABI for the ioctl device, use the proper sysfs
  helper for emitting values, and prevent subtle bugs as new
  administration commands are added to the supported list.

  The bulk of it has appeared in -next save for the top commit which was
  found today and validated on a fixed-up QEMU model.

  Summary:

   - Fix support for CXL memory devices with registers offset from the
     BAR base.

   - Fix the reporting of device capacity.

   - Fix the driver commands list definition to be disconnected from the
     UAPI command list.

   - Replace percpu_ref with rwsem to fix initialization error path.

   - Fix leaks in the driver initialization error path.

   - Drop the power/ directory from CXL device sysfs.

   - Use the recommended sysfs helper for attribute 'show'
     implementations"

* tag 'cxl-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/mem: Fix memory device capacity probing
  cxl/mem: Fix register block offset calculation
  cxl/mem: Force array size of mem_commands[] to CXL_MEM_COMMAND_ID_MAX
  cxl/mem: Disable cxl device power management
  cxl/mem: Do not rely on device_add() side effects for dev_set_name() failures
  cxl/mem: Fix synchronization mechanism for device removal vs ioctl operations
  cxl/mem: Use sysfs_emit() for attribute show routines
2021-04-17 09:30:58 -07:00
Linus Torvalds
fdb5d6cab6 Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "12 patches.

  Subsystems affected by this patch series: mm (documentation, kasan,
  and pagemap), csky, ia64, gcov, and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib: remove "expecting prototype" kernel-doc warnings
  gcov: clang: fix clang-11+ build
  mm: ptdump: fix build failure
  mm/mapping_dirty_helpers: guard hugepage pud's usage
  ia64: tools: remove duplicate definition of ia64_mf() on ia64
  ia64: tools: remove inclusion of ia64-specific version of errno.h header
  ia64: fix discontig.c section mismatches
  ia64: remove duplicate entries in generic_defconfig
  csky: change a Kconfig symbol name to fix e1000 build error
  kasan: remove redundant config option
  kasan: fix hwasan build for gcc
  mm: eliminate "expecting prototype" kernel-doc warnings
2021-04-17 08:38:23 -07:00
Dan Williams
fae8817ae8 cxl/mem: Fix memory device capacity probing
The CXL Identify Memory Device output payload emits capacity in 256MB
units. The driver is treating the capacity field as bytes. This was
missed because QEMU reports bytes when it should report bytes / 256MB.

Fixes: 8adaf747c9 ("cxl/mem: Find device capabilities")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/161862021044.3259705.7008520073059739760.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-04-16 18:21:56 -07:00
Florian Westphal
f2764bd4f6 netlink: don't call ->netlink_bind with table lock held
When I added support to allow generic netlink multicast groups to be
restricted to subscribers with CAP_NET_ADMIN I was unaware that a
genl_bind implementation already existed in the past.

It was reverted due to ABBA deadlock:

1. ->netlink_bind gets called with the table lock held.
2. genetlink bind callback is invoked, it grabs the genl lock.

But when a new genl subsystem is (un)registered, these two locks are
taken in reverse order.

One solution would be to revert again and add a comment in genl
referring 1e82a62fec, "genetlink: remove genl_bind").

This would need a second change in mptcp to not expose the raw token
value anymore, e.g.  by hashing the token with a secret key so userspace
can still associate subflow events with the correct mptcp connection.

However, Paolo Abeni reminded me to double-check why the netlink table is
locked in the first place.

I can't find one.  netlink_bind() is already called without this lock
when userspace joins a group via NETLINK_ADD_MEMBERSHIP setsockopt.
Same holds for the netlink_unbind operation.

Digging through the history, commit f773608026
("netlink: access nlk groups safely in netlink bind and getname")
expanded the lock scope.

commit 3a20773bee ("net: netlink: cap max groups which will be considered in netlink_bind()")
... removed the nlk->ngroups access that the lock scope
extension was all about.

Reduce the lock scope again and always call ->netlink_bind without
the table lock.

The Fixes tag should be vs. the patch mentioned in the link below,
but that one got squash-merged into the patch that came earlier in the
series.

Fixes: 4d54cc3211 ("mptcp: avoid lock_fast usage in accept path")
Link: https://lore.kernel.org/mptcp/20210213000001.379332-8-mathew.j.martineau@linux.intel.com/T/#u
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Sean Tranchetti <stranche@codeaurora.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 17:01:04 -07:00
Linus Torvalds
9cdbf64674 io_uring-5.12-2021-04-16
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmB5/80QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpgJWD/0YyQ7YlMKw4x2nS6TiojeD5KN8aTvVVHlf
 TetYVXIOaMNPatUDREVl7vgaQVFi2cgWLvshYPIarsQK9ESNJ/UqKi0c6pJsa29w
 02K8EJsEdmQmJlyC6tUv/Drvdfzinx+jAm9doz8FrJ+2v5+pYqNFhFTh/JKRebI8
 kBEKH/e3eHg305TDXcWOoNxX3jD77v1IJo8JavLt1vncQKb6P3dahGwmkFRpRcHZ
 sY33baI2jdO/79ybH0F0fNgD+XGnBYShKB7iOlJfT9SeI8NfpR/OCuuPl3gxeeKZ
 PwHcsPHA/b0AAUKpWY0sX/86xMUUab2DPJV5nQR5SrgniJLs0Xqm0dvz1r6QM2BK
 7EfwbXK48xm6Wop5WFlo+wqzW11ES/nRHm9leRomeeKo6Goe/4kyEgK93QJOkckv
 /kt8t4PIxALlWKmgJgKk5kEWiP/QT0LjaZE2lYy9VcfpSoC7E7ZnK1KlvwbYOfZK
 QqjNNsRr2z7zQaUCFHDc3mPe/WkV8DygRrXZYl8qfopqndOduceFaGqNe5iZV2IX
 NnC7FGY66dcmjqGmOqr+4RvhUYR2+GtazaYgV14LM1cGBO5OtqlS1m+DRDbiavp4
 fpHeGGQx78O97LURNJG4Ti/AR5dfSQLQwZzb60UBk43a9ZwVsLtxFquSaV8dkm3U
 0hfxANWYXg==
 =KEBW
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-5.12-2021-04-16' of git://git.kernel.dk/linux-block

Pull io_uring fix from Jens Axboe:
 "Fix for a potential hang at exit with SQPOLL from Pavel"

* tag 'io_uring-5.12-2021-04-16' of git://git.kernel.dk/linux-block:
  io_uring: fix early sqd_list removal sqpoll hangs
2021-04-16 16:18:53 -07:00
Randy Dunlap
c95c2d328c lib: remove "expecting prototype" kernel-doc warnings
Fix various kernel-doc warnings in lib/ due to missing or erroneous
function names.

Add kernel-doc for some function parameters that was missing.  Use
kernel-doc "Return:" notation in earlycpio.c.

Quietens the following warnings:

  lib/earlycpio.c:61: warning: expecting prototype for cpio_data find_cpio_data(). Prototype was for find_cpio_data() instead

  lib/lru_cache.c:640: warning: expecting prototype for lc_dump(). Prototype was for lc_seq_dump_details() instead
  lru_cache.c:90: warning: Function parameter or member 'cache' not described in 'lc_create'

  lib/parman.c:368: warning: expecting prototype for parman_item_del(). Prototype was for parman_item_remove() instead
  parman.c:309: warning: Excess function parameter 'prority' description in 'parman_prio_init'

  lib/radix-tree.c:703: warning: expecting prototype for __radix_tree_insert(). Prototype was for radix_tree_insert() instead
  radix-tree.c:180: warning: Excess function parameter 'addr' description in 'radix_tree_find_next_bit'
  radix-tree.c:180: warning: Excess function parameter 'size' description in 'radix_tree_find_next_bit'
  radix-tree.c:931: warning: Function parameter or member 'iter' not described in 'radix_tree_iter_replace'

Link: https://lkml.kernel.org/r/20210411221756.15461-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:37 -07:00
Johannes Berg
04c53de57c gcov: clang: fix clang-11+ build
With clang-11+, the code is broken due to my kvmalloc() conversion
(which predated the clang-11 support code) leaving one vmalloc() in
place.  Fix that.

Link: https://lkml.kernel.org/r/20210412214210.6e1ecca9cdc5.I24459763acf0591d5e6b31c7e3a59890d802f79c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:37 -07:00
Christophe Leroy
458376913d mm: ptdump: fix build failure
READ_ONCE() cannot be used for reading PTEs.  Use ptep_get() instead, to
avoid the following errors:

    CC      mm/ptdump.o
  In file included from <command-line>:
  mm/ptdump.c: In function 'ptdump_pte_entry':
  include/linux/compiler_types.h:320:38: error: call to '__compiletime_assert_207' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
    320 |  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        |                                      ^
  include/linux/compiler_types.h:301:4: note: in definition of macro '__compiletime_assert'
    301 |    prefix ## suffix();    \
        |    ^~~~~~
  include/linux/compiler_types.h:320:2: note: in expansion of macro '_compiletime_assert'
    320 |  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        |  ^~~~~~~~~~~~~~~~~~~
  include/asm-generic/rwonce.h:36:2: note: in expansion of macro 'compiletime_assert'
     36 |  compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
        |  ^~~~~~~~~~~~~~~~~~
  include/asm-generic/rwonce.h:49:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
     49 |  compiletime_assert_rwonce_type(x);    \
        |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  mm/ptdump.c:114:14: note: in expansion of macro 'READ_ONCE'
    114 |  pte_t val = READ_ONCE(*pte);
        |              ^~~~~~~~~
  make[2]: *** [mm/ptdump.o] Error 1

See commit 481e980a7c ("mm: Allow arches to provide ptep_get()") and
commit c0e1c8c22b ("powerpc/8xx: Provide ptep_get() with 16k pages")
for details.

Link: https://lkml.kernel.org/r/912b349e2bcaa88939904815ca0af945740c6bd4.1618478922.git.christophe.leroy@csgroup.eu
Fixes: 30d621f672 ("mm: add generic ptdump")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:37 -07:00
Zack Rusin
94036f4c88 mm/mapping_dirty_helpers: guard hugepage pud's usage
Mapping dirty helpers have, so far, been only used on X86, but a port of
vmwgfx to ARM64 exposed a problem which results in a compilation error
on ARM64 systems:

  mm/mapping_dirty_helpers.c: In function `wp_clean_pud_entry':
  mm/mapping_dirty_helpers.c:172:32: error: implicit declaration of function `pud_dirty'; did you mean `pmd_dirty'? [-Werror=implicit-function-declaration]

This is due to the fact that mapping_dirty_helpers code assumes that
pud_dirty is always defined, which is not the case for architectures
that don't define CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD.

ARM64 arch is a little inconsistent when it comes to PUD hugepage
helpers, e.g. it defines pud_young but not pud_dirty but regardless of
that the core kernel code shouldn't assume that any of the PUD hugepage
helpers are available unless CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
is defined.  This prevents compilation errors whenever one of the
drivers is ported to new architectures.

Link: https://lkml.kernel.org/r/20210409165151.694574-1-zackr@vmware.com
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellstrm (Intel) <thomas_os@shipmail.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:37 -07:00
John Paul Adrian Glaubitz
f4bf09dc3a ia64: tools: remove duplicate definition of ia64_mf() on ia64
The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is
already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf
failing to build:

    CC       /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
  In file included from /usr/src/linux/tools/include/asm/barrier.h:24,
                   from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
                   from libbpf.c:37:
  /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
     43 | #define ia64_mf()       asm volatile ("mf" ::: "memory")
        |
  In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
                   from /usr/include/ia64-linux-gnu/asm/swab.h:11,
                   from /usr/include/linux/swab.h:8,
                   from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
                   from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
                   from libbpf.c:36:
  /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
    382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
        |
  cc1: all warnings being treated as errors

Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:37 -07:00
John Paul Adrian Glaubitz
17786fea41 ia64: tools: remove inclusion of ia64-specific version of errno.h header
There is no longer an ia64-specific version of the errno.h header below
arch/ia64/include/uapi/asm/, so trying to build tools/bpf fails with:

    CC       /usr/src/linux/tools/bpf/bpftool/btf_dumper.o
  In file included from /usr/src/linux/tools/include/linux/err.h:8,
                   from btf_dumper.c:11:
  /usr/src/linux/tools/include/uapi/asm/errno.h:13:10: fatal error: ../../../arch/ia64/include/uapi/asm/errno.h: No such file or directory
     13 | #include "../../../arch/ia64/include/uapi/asm/errno.h"
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  compilation terminated.

Thus, just remove the inclusion of the ia64-specific errno.h so that the
build will use the generic errno.h header on this target which was used
there anyway as the ia64-specific errno.h was just a wrapper for the
generic header.

Fixes: c25f867ddd ("ia64: remove unneeded uapi asm-generic wrappers")
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:37 -07:00
Randy Dunlap
e2af9da4f8 ia64: fix discontig.c section mismatches
Fix IA64 discontig.c Section mismatch warnings.

When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions
computer_pernodesize() and scatter_node_data() should not be marked as
__meminit because they are needed after init, on any memory hotplug
event.  Also, early_nr_cpus_node() is called by compute_pernodesize(),
so early_nr_cpus_node() cannot be __meminit either.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize()
  The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
  This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data()
  The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
  This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node()
  The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
  This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.

Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:37 -07:00
Randy Dunlap
19d000d933 ia64: remove duplicate entries in generic_defconfig
Fix ia64 generic_defconfig duplicate entries, as warned by:

  arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA:  => 58
  arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA_PIIX:  => 59

These 2 symbols still have the same value as in the removed lines.

Link: https://lkml.kernel.org/r/20210411020255.18052-1-rdunlap@infradead.org
Fixes: c331649e63 ("ia64: Use libata instead of the legacy ide driver in defconfigs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:37 -07:00
Randy Dunlap
d199161653 csky: change a Kconfig symbol name to fix e1000 build error
e1000's #define of CONFIG_RAM_BASE conflicts with a Kconfig symbol in
arch/csky/Kconfig.

The symbol in e1000 has been around longer, so change arch/csky/ to use
DRAM_BASE instead of RAM_BASE to remove the conflict.  (although e1000
is also a 2-line change)

Link: https://lkml.kernel.org/r/20210411055335.7111-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:36 -07:00
Walter Wu
02c587733c kasan: remove redundant config option
CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack
instrumentation, but we should only need one config, so that we remove
CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable.  see [1].

When enable KASAN stack instrumentation, then for gcc we could do no
prompt and default value y, and for clang prompt and default value n.

This patch fixes the following compilation warning:

  include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef]

[akpm@linux-foundation.org: fix merge snafu]

Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1]
Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com
Fixes: d9b571c885 ("kasan: fix KASAN_STACK dependency for HW_TAGS")
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:36 -07:00
Arnd Bergmann
5c595ac4c7 kasan: fix hwasan build for gcc
gcc-11 adds support for -fsanitize=kernel-hwaddress, so it becomes
possible to enable CONFIG_KASAN_SW_TAGS.

Unfortunately this fails to build at the moment, because the
corresponding command line arguments use llvm specific syntax.

Change it to use the cc-param macro instead, which works on both clang
and gcc.

[elver@google.com: fixup for "kasan: fix hwasan build for gcc"]
  Link: https://lkml.kernel.org/r/YHQZVfVVLE/LDK2v@elver.google.com

Link: https://lkml.kernel.org/r/20210323124112.1229772-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:36 -07:00
Randy Dunlap
845be1cd34 mm: eliminate "expecting prototype" kernel-doc warnings
Fix stray kernel-doc warnings in mm/ due to mis-typed or missing function
names.

Quietens these kernel-doc warnings:

  mm/mmu_gather.c:264: warning: expecting prototype for tlb_gather_mmu(). Prototype was for __tlb_gather_mmu() instead
  mm/oom_kill.c:180: warning: expecting prototype for Check whether unreclaimable slab amount is greater than(). Prototype was for should_dump_unreclaim_slab() instead
  mm/shuffle.c:155: warning: expecting prototype for shuffle_free_memory(). Prototype was for __shuffle_free_memory() instead

Link: https://lkml.kernel.org/r/20210411210642.11362-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-16 16:10:36 -07:00
David S. Miller
b022654296 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2021-04-17

The following pull-request contains BPF updates for your *net* tree.

We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 8 files changed, 175 insertions(+), 111 deletions(-).

The main changes are:

1) Fix a potential NULL pointer dereference in libbpf's xsk
   umem handling, from Ciara Loftus.

2) Mitigate a speculative oob read of up to map value size by
   tightening the masking window, from Daniel Borkmann.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 15:48:08 -07:00
Lijun Pan
6b389c1637 MAINTAINERS: update my email
Update my email and change myself to Reviewer.

Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 15:26:32 -07:00
Daniel Borkmann
d7a5091351 bpf: Update selftests to reflect new error states
Update various selftest error messages:

 * The 'Rx tried to sub from different maps, paths, or prohibited types'
   is reworked into more specific/differentiated error messages for better
   guidance.

 * The change into 'value -4294967168 makes map_value pointer be out of
   bounds' is due to moving the mixed bounds check into the speculation
   handling and thus occuring slightly later than above mentioned sanity
   check.

 * The change into 'math between map_value pointer and register with
   unbounded min value' is similarly due to register sanity check coming
   before the mixed bounds check.

 * The case of 'map access: known scalar += value_ptr from different maps'
   now loads fine given masks are the same from the different paths (despite
   max map value size being different).

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-04-16 23:52:15 +02:00