One of the methods with which bfq boosts throughput is by merging queues.
One of the merging variants in bfq is the stable merge.
This mechanism is activated between two queues only if they are created
within a certain maximum time T1 from each other.
Merging can happen soon or be delayed. In the second case, before
merging, bfq needs to evaluate a throughput-boost parameter that
indicates whether the queue generates a high throughput is served alone.
Merging occurs when this throughput-boost is not high enough.
In particular, this parameter is evaluated and late merging may occur
only after at least a time T2 from the creation of the queue.
Currently T1 and T2 are set to 180ms and 200ms, respectively.
In this way the merging mechanism rarely occurs because time is not
enough. This results in a noticeable lowering of the overall throughput
with some workloads (see the example below).
This commit introduces two constants bfq_activation_stable_merging and
bfq_late_stable_merging in order to increase the duration of T1 and T2.
Both the stable merging activation time and the late merging
time are set to 600ms. This value has been experimentally evaluated
using sqlite benchmark in the Phoronix Test Suite on a HDD.
The duration of the benchmark before this fix was 111.02s, while now
it has reached 97.02s, a better result than that of all the other
schedulers.
Signed-off-by: Pietro Pedroni <pedroni.pietro.96@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20210619140948.98712-5-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 430a67f9d6 ("block, bfq: merge bursts of newly-created
queues"), BFQ may schedule a merge between a newly created sync
bfq_queue and the last sync bfq_queue created. Such a merging is not
performed immediately, because BFQ needs first to find out whether the
newly created queue actually reaches a higher throughput if not merged
at all (and in that case BFQ will not perform any stable merging). To
check that, a little time must be waited after the creation of the new
queue, so that some I/O can flow in the queue, and statistics on such
I/O can be computed.
Yet, to evaluate the above waiting time, the last split time is
considered as start time, instead of the creation time of the
queue. This is a mistake, because considering the split time is
correct only in the following scenario.
The queue undergoes a non-stable merges on the arrival of its very
first I/O request, due to close I/O with some other queue. While the
queue is merged for close I/O, stable merging is not considered. Yet
the queue may then happen to be split, if the close I/O finishes (or
happens to be a false positive). From this time on, the queue can
again be considered for stable merging. But, again, a little time must
elapse, to let some new I/O flow in the queue and to get updated
statistics. To wait for this time, the split time is to be taken into
account.
Yet, if the queue does not undergo a non-stable merge on the arrival
of its very first request, then BFQ immediately checks whether the
stable merge is to be performed. It happens because the split time for
a queue is initialized to minus infinity when the queue is created.
This commit fixes this mistake by adding the missing condition. Now
the check for delayed stable-merge is performed after a little time is
elapsed not only from the last queue split time, but also from the
creation time of the queue.
Fixes: 430a67f9d6 ("block, bfq: merge bursts of newly-created queues")
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20210619140948.98712-4-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When attempting to schedule a merge of a given bfq_queue with the currently
in-service bfq_queue or with a cooperating bfq_queue among the scheduled
bfq_queues, delayed stable merge is checked for rotational or non-queueing
devs. For this stable merge to be performed, some conditions must be met.
If the current bfq_queue underwent some split from some merged bfq_queue,
one of these conditions is that two hundred milliseconds must elapse from
split, otherwise this condition is always met.
Unfortunately, by mistake, time_is_after_jiffies() was written instead of
time_is_before_jiffies() for this check, verifying that less than two
hundred milliseconds have elapsed instead of verifying that at least two
hundred milliseconds have elapsed.
Fix this issue by replacing time_is_after_jiffies() with
time_is_before_jiffies().
Signed-off-by: Luca Mariotti <mariottiluca1@hotmail.it>
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: Pietro Pedroni <pedroni.pietro.96@gmail.com>
Link: https://lore.kernel.org/r/20210619140948.98712-3-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merged bfq_queues are kept out of weight-raising (low-latency)
mechanisms. The reason is that these queues are usually created for
non-interactive and non-soft-real-time tasks. Yet this is not the case
for stably-merged queues. These queues are merged just because they
are created shortly after each other. So they may easily serve the I/O
of an interactive or soft-real time application, if the application
happens to spawn multiple processes.
To address this issue, this commits lets also stably-merged queued
enjoy weight raising.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20210619140948.98712-2-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit a79050434b ("blk-rq-qos: refactor out common elements of
blk-wbt"), if throttle was disabled by wbt_disable_default(), we could
not enable again, fix this by set enable_state back to
WBT_STATE_ON_DEFAULT.
Fixes: a79050434b ("blk-rq-qos: refactor out common elements of blk-wbt")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210619093700.920393-3-yi.zhang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we disable wbt by simply zero out rwb->wb_normal in
wbt_disable_default() when switch elevator to bfq, but it's not safe
because it will become false positive if we change queue depth. If it
become false positive between wbt_wait() and wbt_track() when submit
write request, it will lead to drop rqw->inflight to -1 in wbt_done(),
which will end up trigger IO hung. Fix this issue by introduce a new
state which mean the wbt was disabled.
Fixes: a79050434b ("blk-rq-qos: refactor out common elements of blk-wbt")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210619093700.920393-2-yi.zhang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While one or more requests with a certain I/O priority are pending, do not
dispatch lower priority requests. Dispatch lower priority requests anyway
after the "aging" time has expired.
This patch has been tested as follows:
modprobe scsi_debug ndelay=1000000 max_queue=16 &&
sd='' &&
while [ -z "$sd" ]; do
sd=/dev/$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*)
done &&
echo $((100*1000)) > /sys/block/$sd/queue/iosched/aging_expire &&
cd /sys/fs/cgroup/blkio/ &&
echo $$ >cgroup.procs &&
echo restrict-to-be >blkio.prio.class &&
mkdir -p hipri &&
cd hipri &&
echo none-to-rt >blkio.prio.class &&
{ max-iops -a1 -d32 -j1 -e mq-deadline $sd >& ~/low-pri.txt & } &&
echo $$ >cgroup.procs &&
max-iops -a1 -d32 -j1 -e mq-deadline $sd >& ~/hi-pri.txt
Result:
* 11000 IOPS for the high-priority job
* 40 IOPS for the low-priority job
If the aging expiry time is changed from 100s into 0, the IOPS results change
into 6712 and 6796 IOPS.
The max-iops script is a script that runs fio with the following arguments:
--bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60
--norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j}
--iodepth=${arg_d} --iodepth_batch_submit=${arg_a}
--iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1}
--filename=${positional_argument_1}
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-17-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Maintain statistics per cgroup and export these to user space. These
statistics are essential for verifying whether the proper I/O priorities
have been assigned to requests. An example of the statistics data with
this patch applied:
$ cat /sys/fs/cgroup/io.stat
11:2 rbytes=0 wbytes=0 rios=3 wios=0 dbytes=0 dios=0 [NONE] dispatched=0 inserted=0 merged=171 [RT] dispatched=0 inserted=0 merged=0 [BE] dispatched=0 inserted=0 merged=0 [IDLE] dispatched=0 inserted=0 merged=0
8:32 rbytes=2142720 wbytes=0 rios=105 wios=0 dbytes=0 dios=0 [NONE] dispatched=0 inserted=0 merged=171 [RT] dispatched=0 inserted=0 merged=0 [BE] dispatched=0 inserted=0 merged=0 [IDLE] dispatched=0 inserted=0 merged=0
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-16-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Track I/O statistics per I/O priority and export these statistics to
debugfs. These statistics help developers of the deadline scheduler.
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-15-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Maintain one dispatch list and one FIFO list per I/O priority class: RT, BE
and IDLE. Maintain statistics for each priority level. Split the debugfs
attributes per priority level as follows:
$ ls /sys/kernel/debug/block/.../sched/
async_depth dispatch2 read_next_rq write2_fifo_list
batching read0_fifo_list starved write_next_rq
dispatch0 read1_fifo_list write0_fifo_list
dispatch1 read2_fifo_list write1_fifo_list
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-14-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When dispatching the first request of a batch, the deadline_move_request()
call clears .next_rq[] for the opposite data direction. .next_rq[] is not
restored when changing data direction. Fix this by not clearing .next_rq[]
and by keeping track of the data direction of a batch in a variable instead.
This patch is a micro-optimization because:
- The number of deadline_next_request() calls for the read direction is
halved.
- The number of times that deadline_next_request() returns NULL is reduced.
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-13-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For interactive workloads it is important that synchronous requests are
not delayed. Hence reserve 25% of scheduler tags for synchronous requests.
This patch still allows asynchronous requests to fill the hardware queues
since blk_mq_init_sched() makes sure that the number of scheduler requests
is the double of the hardware queue depth. From blk_mq_init_sched():
q->nr_requests = 2 * min_t(unsigned int, q->tag_set->queue_depth,
BLKDEV_MAX_RQ);
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-12-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Define separate macros for integers and jiffies to improve readability.
Use sysfs_emit() and kstrtoint() instead of sprintf() and simple_strtol().
The former functions are the recommended functions.
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-11-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Modern compilers complain if an out-of-range value is passed to a function
argument that has an enumeration type. Let the compiler detect out-of-range
data direction arguments instead of verifying the data_dir argument at
runtime.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-10-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change "queue" into "sched" to make the function names reflect better the
purpose of these functions.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-9-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make __dd_dispatch_request() easier to read by removing two local
variables.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-8-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Document the locking strategy by adding two lockdep_assert_held()
statements.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-7-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make the code easier to read by adding more comments.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-6-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce an rq-qos policy that assigns an I/O priority to requests based
on blk-cgroup configuration settings. This policy has the following
advantages over the ioprio_set() system call:
- This policy is cgroup based so it has all the advantages of cgroups.
- While ioprio_set() does not affect page cache writeback I/O, this rq-qos
controller affects page cache writeback I/O for filesystems that support
assiociating a cgroup with writeback I/O. See also
Documentation/admin-guide/cgroup-v2.rst.
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210618004456.7280-5-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rq_qos_id_to_name() is only used in blk-mq-debugfs.c so move that function
into in blk-mq-debugfs.c.
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20210618004456.7280-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before adding more calls in this function, simplify the error path.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210618004456.7280-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These entries were consecutive at the time of their introduction but are no
longer consecutive. Make these again consecutive. Additionally, modify the
help text since it refers to blk-mq and since the legacy block layer has
been removed.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20210618004456.7280-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The insert_requests and dispatch_request elevator operations are
mandatory for the correct execution of an elevator, and all implemented
elevators (bfq, kyber and mq-deadline) implement them. As a result,
there is no need to check for these operations before calling them when
a queue has an elevator set. This simplifies the code in
__blk_mq_sched_dispatch_requests() and blk_mq_sched_insert_request().
To avoid out-of-tree elevators to crash the kernel in case of bad
implementation, add a check in elv_register() to verify that these
operations are implemented.
A small, probably not significant, IOPS improvement of 0.1% is observed
with this patch applied (4.117 MIOPS to 4.123 MIOPS, average of 20 fio
runs doing 4K random direct reads with psync and 32 jobs).
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210618015922.713999-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
tagset can't be used after blk_cleanup_queue() is returned because
freeing tagset usually follows blk_clenup_queue(). Commit d97e594c51
("blk-mq: Use request queue-wide tags for tagset-wide sbitmap") adds
check on q->tag_set->flags in blk_mq_exit_sched(), and causes
use-after-free.
Fixes it by using hctx->flags.
Reported-by: syzbot+77ba3d171a25c56756ea@syzkaller.appspotmail.com
Fixes: d97e594c51 ("blk-mq: Use request queue-wide tags for tagset-wide sbitmap")
Cc: John Garry <john.garry@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20210609063046.122843-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit bf382fb0bcef4 ("block: remove legacy IO schedulers", Oct 12 2018)
removes the CFQ scheduler, together with blkio.weight and
blkio.weight_device described in cgroup v1 documentation. Users are
supposed to use the BFQ scheduler, which cgroup file for setting weight
is blkio.bfq.weight, but there is no way to set per-device weight.
Later, commit 795fe54c2a per-device weights for BFQ, meaning that
blkio.bfq.weight and blkio.bfq.weight_device can be used in a way
similar to the old CFQ cgroup interface.
Yet, the cgroup v1 docs were never updated. Fix this:
- use the new file names;
- fix the range for weight (used to be 10..1000, now 1..1000);
- link to BFQ scheduler docs.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The functionality of setting per-device weight for BFQ was added
in v5.4 (commit 795fe54c2a), but the documentation was never
updated.
While at it, improve formatting a bit.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Link: https://lore.kernel.org/r/20210614214109.207430-1-kolyshkin@gmail.com
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark queue init done when everything is done well in blk_register_queue(),
so that wbt_enable_default() can be run quickly without any RCU period
involved since adding rq qos requires to freeze queue.
Also no any side effect by delaying to mark queue init done.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/r/20210609015822.103433-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yi reported several kernel panics on:
[16687.001777] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
[16687.163549] pc : __rq_qos_track+0x38/0x60
or
[ 997.690455] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[ 997.850347] pc : __rq_qos_done+0x2c/0x50
Turns out it is caused by race between adding rq qos(wbt) and normal IO
because rq_qos_add can be run when IO is being submitted, fix this issue
by freezing queue before adding/deleting rq qos to queue.
rq_qos_exit() needn't to freeze queue because it is called after queue
has been frozen.
iolatency calls rq_qos_add() during allocating queue, so freezing won't
add delay because queue usage refcount works at atomic mode at that
time.
iocost calls rq_qos_add() when writing cgroup attribute file, that is
fine to freeze queue at that time since we usually freeze queue when
storing to queue sysfs attribute, meantime iocost only exists on the
root cgroup.
wbt_init calls it in blk_register_queue() and queue sysfs attribute
store(queue_wb_lat_store() when write it 1st time in case of !BLK_WBT_MQ),
the following patch will speedup the queue freezing in wbt_init.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/r/20210609015822.103433-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We must release the queue before freeing the tagset.
Fixes: 1c99502fae ("loop: use blk_mq_alloc_disk and blk_cleanup_disk")
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Various places expect the request_queue in ->rq. Initialize it to
avoid NULL pointer derefences.
Fixes: 6966bb921d ("mtd_blkdevs: use blk_mq_alloc_disk")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-31-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-30-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-29-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-26-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-23-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the blk_mq_alloc_disk API to simplify the gendisk and request_queue
allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210602065345.355274-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
