The kernel handles the NX fault by updating CSB or sending
signal to process. In multithread applications, children can
open VAS windows and can exit without closing them. But the
parent can continue to send NX requests with these windows. To
prevent pid reuse, reference will be taken on pid and tgid
when the window is opened and release them during window close.
The current code is not releasing the tgid reference which can
cause pid leak and this patch fixes the issue.
Fixes: db1c08a740 ("powerpc/vas: Take reference to PID and mm for user space windows")
Cc: stable@vger.kernel.org # 5.8+
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6020fc4d444864fe20f7dcdc5edfe53e67480a1c.camel@linux.ibm.com
Merge some powerpc KVM patches from our topic branch.
In particular this brings in Nick's big series rewriting parts of the
guest entry/exit path in C.
Conflicts:
arch/powerpc/kernel/security.c
arch/powerpc/kvm/book3s_hv_rmhandlers.S
Now that KUAP and KUEP have been significantly optimised and can be
disabled at boot time using 'nosmap' and 'nosmep' kernel parameters,
them can be active by default like in other powerpc platforms.
It is still possible to disable them completely in the configuration.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86c7c74a3ba5312daea7e9658b096e2bcc6f4b64.1622708530.git.christophe.leroy@csgroup.eu
'struct ppc_inst' is an internal representation of an instruction, but
in-memory instructions are and will remain a table of 'u32' forever.
Replace all 'struct ppc_inst *' used for locating an instruction in
memory by 'u32 *'. This removes a lot of undue casts to 'struct
ppc_inst *'.
It also helps locating ab-use of 'struct ppc_inst' dereference.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix ppc_inst_next(), use u32 instead of unsigned int]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7062722b087228e42cbd896e39bfdf526d6a340a.1621516826.git.christophe.leroy@csgroup.eu
Fixes gcc '-Wunused-but-set-variable' warning:
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
arch/powerpc/platforms/cell/spider-pci.c: In function 'spiderpci_io_flush':
arch/powerpc/platforms/cell/spider-pci.c:28:6: warning:
variable ‘val’ set but not used [-Wunused-but-set-variable]
It never used since introduction.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210601085319.140461-1-libaokun1@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
arch/powerpc/platforms/cell/spufs/switch.c: In function 'check_ppu_mb_stat':
arch/powerpc/platforms/cell/spufs/switch.c:1660:6: warning:
variable ‘dummy’ set but not used [-Wunused-but-set-variable]
arch/powerpc/platforms/cell/spufs/switch.c: In function 'check_ppuint_mb_stat':
arch/powerpc/platforms/cell/spufs/switch.c:1675:6: warning:
variable ‘dummy’ set but not used [-Wunused-but-set-variable]
It never used since introduction.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210601085127.139598-1-libaokun1@huawei.com
With gcc 10.3, there is this compiler error:
compiler.h:56:26: error: this statement may fall through
mpc52xx_gpt.c:586:2: note: here
586 | case WDIOC_GETTIMEOUT:
| ^~~~
So add the fallthrough pseudo keyword.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210601190200.2637776-1-trix@redhat.com
POWER9 and later processors always go via the P9 guest entry path now.
Remove the remaining support from the P7/8 path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210528090752.3542186-33-npiggin@gmail.com
Only a handful of old PPC systems are still using the old 'nomap'
variant of the irqdomain library. Move the associated definitions
behind a configuration option, which will allow us to make some
more radical changes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
irq_domain_add_legacy_isa is a pain. It only exists for the benefit of
two PPC-specific drivers, and creates an ugly dependency between asm/irq.h
and linux/irqdomain.h
Instead, let's convert these two drivers to irq_domain_add_legacy(),
stop using NUM_ISA_INTERRUPTS by directly setting NR_IRQS_LEGACY.
The dependency cannot be broken yet as there is a lot of PPC-related
code that depends on it, but that's the first step towards it.
A followup patch will remove irq_domain_add_legacy_isa.
Signed-off-by: Marc Zyngier <maz@kernel.org>
A bunch of PPC files are missing the inclusion of linux/of.h and
linux/irqdomain.h, relying on transitive inclusion from another
file.
As we are about to break this dependency, make sure these dependencies
are explicit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Commit f959dcd6dd (dma-direct: Fix
potential NULL pointer dereference) added a null check on the
dma_mask pointer of the kernel's device structure.
Add a dma_mask variable to the ps3_dma_region structure and set
the device structure's dma_mask pointer to point to this new variable.
Fixes runtime errors like these:
# WARNING: Fixes tag on line 10 doesn't match correct format
# WARNING: Fixes tag on line 10 doesn't match correct format
ps3_system_bus_match:349: dev=8.0(sb_01), drv=8.0(ps3flash): match
WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:151 .dma_map_page_attrs+0x34/0x1e0
ps3flash sb_01: ps3stor_setup:193: map DMA region failed
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/562d0c9ea0100a30c3b186bcc7adb34b0bbd2cd7.1622746428.git.geoff@infradead.org
Add a new sysfs entry /sys/firmware/ps3/fw-version that exports
the PS3's firmware version.
The firmware version is available through an LV1 hypercall, and we've
been printing it to the boot log, but haven't provided an easy way for
user utilities to get it.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/41509b2da647cd34b1331cc4756c8774b1e284eb.1622822173.git.geoff@infradead.org
We don't need the 'lmbs_available' variable to count the valid LMBs and
to check if we have less than 'lmbs_to_remove'. We must ensure that the
entire LMB range must be removed, so we can error out immediately if any
LMB in the range is marked as reserved.
Add a couple of comments explaining the reasoning behind the differences
we have in this function in contrast to what it is done in its sister
function, dlpar_memory_remove_by_count().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-5-danielhb413@gmail.com
After marking the LMBs as reserved depending on dlpar_remove_lmb() rc,
we evaluate whether we need to add the LMBs back or if we can release
the LMB DRCs. In both cases, a for_each_drmem_lmb() loop without a break
condition is used. This means that we're going to cycle through all LMBs
of the partition even after we're done with what we were going to do.
This patch adds break conditions in both loops to avoid this. The
'lmbs_removed' variable was renamed to 'lmbs_reserved', and it's now
being decremented each time a lmb reservation is removed, indicating
that the operation we're doing (adding back LMBs or releasing DRCs) is
completed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-4-danielhb413@gmail.com
DRCONF_MEM_RESERVED is a flag that represents the "Reserved Memory"
status in LOPAR v2.10, section 4.2.8. If a LMB is marked as reserved,
quoting LOPAR, "is not to be used or altered by the base OS". This flag
is read only in the kernel, being set by the firmware/hypervisor in the
DT. As an example, QEMU will set this flag in hw/ppc/spapr.c,
spapr_dt_dynamic_memory().
lmb_is_removable() does not check for DRCONF_MEM_RESERVED. This function
is used in dlpar_remove_lmb() as a guard before the removal logic. Since
it is failing to check for !RESERVED, dlpar_remove_lmb() will fail in a
later stage instead of failing in the validation when receiving a
reserved LMB as input.
lmb_is_removable() is also used in dlpar_memory_remove_by_count() to
evaluate if we have enough LMBs to complete the request. The missing
!RESERVED check in this case is causing dlpar_memory_remove_by_count()
to miscalculate the number of elegible LMBs for the removal, and can
make it error out later on instead of failing in the validation with the
'not enough LMBs to satisfy request' message.
Making a DRCONF_MEM_RESERVED check in lmb_is_removable() fixes all these
issues.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-3-danielhb413@gmail.com
As previously done in dlpar_cpu_remove() for CPUs, this patch changes
dlpar_memory_remove_by_ic() to unisolate the LMB DRC when the LMB is
failed to be removed. The hypervisor, seeing a LMB DRC that was supposed
to be removed being unisolated instead, can do error recovery on its
side.
This change is done in dlpar_memory_remove_by_ic() only because, as of
today, only QEMU is using this code path for error recovery (via the
PSERIES_HP_ELOG_ID_DRC_IC event). phyp treats it as a no-op.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-2-danielhb413@gmail.com
The statement of the last "if (xxx)" branch is the same as the "else"
branch. Delete it to simplify code.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210510131924.3907-1-thunder.leizhen@huawei.com
dlpar_memory_remove() is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210514071041.17432-1-yuehaibing@huawei.com
Currently drc_pmem_qeury_stats() generates a dev_err in case
"Enable Performance Information Collection" feature is disabled from
HMC or performance stats are not available for an nvdimm. The error is
of the form below:
papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Failed to query
performance stats, Err:-10
This error message confuses users as it implies a possible problem
with the nvdimm even though its due to a disabled/unavailable
feature. We fix this by explicitly handling the H_AUTHORITY and
H_UNSUPPORTED errors from the H_SCM_PERFORMANCE_STATS hcall.
In case of H_AUTHORITY error an info message is logged instead of an
error, saying that "Permission denied while accessing performance
stats" and an EPERM error is returned back.
In case of H_UNSUPPORTED error we return a EOPNOTSUPP error back from
drc_pmem_query_stats() indicating that performance stats-query
operation is not supported on this nvdimm.
Fixes: 2d02bf835e ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508043642.114076-1-vaibhav@linux.ibm.com
The hcall tracing code has a recursion check built in, which skips
tracing if we are already tracing an hcall.
However if the tracing code has problems with recursion, this check
may not catch all cases because the tracing code could be invoked from
a different tracepoint first, then make an hcall that gets traced,
then recurse.
Add an explicit warning if recursion is detected here, which might help
to notice tracing code making hcalls. Really the core trace code should
have its own recursion checking and warnings though.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-5-npiggin@gmail.com
Rather than special-case H_CEDE in the hcall trace wrappers, make the
idle H_CEDE call use plpar_hcall_norets_notrace().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-4-npiggin@gmail.com
This doesn't seem very useful to trace before the recursion check, even
if the ftrace code has any recursion checks of its own. Be on the safe
side and don't trace the hcall trace wrappers.
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-3-npiggin@gmail.com
The paravit queued spinlock slow path adds itself to the queue then
calls pv_wait to wait for the lock to become free. This is implemented
by calling H_CONFER to donate cycles.
When hcall tracing is enabled, this H_CONFER call can lead to a spin
lock being taken in the tracing code, which will result in the lock to
be taken again, which will also go to the slow path because it queues
behind itself and so won't ever make progress.
An example trace of a deadlock:
__pv_queued_spin_lock_slowpath
trace_clock_global
ring_buffer_lock_reserve
trace_event_buffer_lock_reserve
trace_event_buffer_reserve
trace_event_raw_event_hcall_exit
__trace_hcall_exit
plpar_hcall_norets_trace
__pv_queued_spin_lock_slowpath
trace_clock_global
ring_buffer_lock_reserve
trace_event_buffer_lock_reserve
trace_event_buffer_reserve
trace_event_raw_event_rcu_dyntick
rcu_irq_exit
irq_exit
__do_irq
call_do_irq
do_IRQ
hardware_interrupt_common_virt
Fix this by introducing plpar_hcall_norets_notrace(), and using that to
make SPLPAR virtual processor dispatching hcalls by the paravirt
spinlock code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-2-npiggin@gmail.com
Merge master back into next, this allows us to resolve some conflicts in
arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so
that they are in alphabetical order again.
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
SYS_SUPPORTS_HUGETLBFS config has duplicate definitions on platforms
that subscribe it. Instead, just make it a generic option which can be
selected on applicable platforms.
Also rename it as ARCH_SUPPORTS_HUGETLBFS instead. This reduces code
duplication and makes it cleaner.
Link: https://lkml.kernel.org/r/1617259448-22529-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> [riscv]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Christoph Hellwig has taken a cleaver and trimmed off the not-needed
code and nicely folded duplicate code in the generic framework.
This lays the groundwork for more work to add extra DMA-backend-ish in
the future. Along with that some bug-fixes to make this a nice working
package"
* 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: don't override user specified size in swiotlb_adjust_size
swiotlb: Fix the type of index
swiotlb: Make SWIOTLB_NO_FORCE perform no allocation
ARM: Qualify enabling of swiotlb_init()
swiotlb: remove swiotlb_nr_tbl
swiotlb: dynamically allocate io_tlb_default_mem
swiotlb: move global variables into a new io_tlb_mem structure
xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup
xen-swiotlb: split xen_swiotlb_init
swiotlb: lift the double initialization protection from xen-swiotlb
xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs
xen-swiotlb: remove xen_set_nslabs
xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported
xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer
swiotlb: split swiotlb_tbl_sync_single
swiotlb: move orig addr and size validation into swiotlb_bounce
swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single
powerpc/svm: stop using io_tlb_start
Trace memory is cleared and the corresponding dcache lines
are flushed after allocation. However, this should not be
done using the PFN. This adds the missing conversion to
virtual address.
Fixes: 2ac02e5ece ("powerpc/mm: Remove dcache flush from memory remove.")
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210501160254.1179831-1-sandipan@linux.ibm.com
This code was only used by the vfio-nvlink2 code, which itself had no
proper use. Drop this huge chunk of code build into every powernv
or generic build.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326061311.1497642-3-hch@lst.de
- Enable KFENCE for 32-bit.
- Implement EBPF for 32-bit.
- Convert 32-bit to do interrupt entry/exit in C.
- Convert 64-bit BookE to do interrupt entry/exit in C.
- Changes to our signal handling code to use user_access_begin/end() more extensively.
- Add support for time namespaces (CONFIG_TIME_NS)
- A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le Goater, Chen Huang, Chris
Packham, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Dan Carpenter, Daniel
Axtens, Daniel Henrique Barboza, David Gibson, Davidlohr Bueso, Denis Efremov,
dingsenjie, Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren Myneni, He Ying,
Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee Jones, Leonardo Bras, Li Huafei,
Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Nathan Chancellor, Nathan
Lynch, Nicholas Piggin, Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi
Bangoria, Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen Rothwell, Thadeu Lima
de Souza Cascardo, Thomas Gleixner, Tony Ambardar, Tyrel Datwyler, Vaibhav Jain,
Vincenzo Frascino, Xiongwei Song, Yang Li, Yu Kuai, Zhang Yunkai.
-----BEGIN PGP SIGNATURE-----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=dfKL
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable KFENCE for 32-bit.
- Implement EBPF for 32-bit.
- Convert 32-bit to do interrupt entry/exit in C.
- Convert 64-bit BookE to do interrupt entry/exit in C.
- Changes to our signal handling code to use user_access_begin/end()
more extensively.
- Add support for time namespaces (CONFIG_TIME_NS)
- A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
- Other smaller features, fixes & cleanups.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.
* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
powerpc/kasan: Fix shadow start address with modules
powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
powerpc/iommu: Annotate nested lock for lockdep
powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
powerpc/iommu: Allocate it_map by vmalloc
selftests/powerpc: remove unneeded semicolon
powerpc/64s: remove unneeded semicolon
powerpc/eeh: remove unneeded semicolon
powerpc/selftests: Add selftest to test concurrent perf/ptrace events
powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
powerpc/selftests/perf-hwbreak: Coalesce event creation code
powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
powerpc/configs: Add IBMVNIC to some 64-bit configs
selftests/powerpc: Add uaccess flush test
...
Pull coredump updates from Al Viro:
"Just a couple of patches this cycle: use of seek + write instead of
expanding truncate and minor header cleanup"
* 'work.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
coredump.h: move CONFIG_COREDUMP-only stuff inside the ifdef
coredump: don't bother with do_truncate()
Pull vfs inode type handling updates from Al Viro:
"We should never change the type bits of ->i_mode or the method tables
(->i_op and ->i_fop) of a live inode.
Unfortunately, not all filesystems took care to prevent that"
* 'work.inode-type-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
spufs: fix bogosity in S_ISGID handling
9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"
openpromfs: don't do unlock_new_inode() until the new inode is set up
hostfs_mknod(): don't bother with init_special_inode()
cifs: have cifs_fattr_to_inode() refuse to change type on live inode
cifs: have ->mkdir() handle race with another client sanely
do_cifs_create(): don't set ->i_mode of something we had not created
gfs2: be careful with inode refresh
ocfs2_inode_lock_update(): make sure we don't change the type bits of i_mode
orangefs_inode_is_stale(): i_mode type bits do *not* form a bitmap...
vboxsf: don't allow to change the inode type
afs: Fix updating of i_mode due to 3rd party change
ceph: don't allow type or device number to change on non-I_NEW inodes
ceph: fix up error handling with snapdirs
new helper: inode_wrong_type()
In case an nvdimm is found to be unarmed during probe then set its
NDD_UNARMED flag before nvdimm_create(). This would enforce a
read-only access to the ndimm region. Presently even if an nvdimm is
unarmed its not marked as read-only on ppc64 guests.
The patch updates papr_scm_nvdimm_init() to force query of nvdimm
health via __drc_pmem_query_health() and if nvdimm is found to be
unarmed then set the nvdimm flag ND_UNARMED for nvdimm_create().
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210329113103.476760-1-vaibhav@linux.ibm.com
Most platforms allocate IOMMU table structures (specifically it_map)
at the boot time and when this fails - it is a valid reason for panic().
However the powernv platform allocates it_map after a device is returned
to the host OS after being passed through and this happens long after
the host OS booted. It is quite possible to trigger the it_map allocation
panic() and kill the host even though it is not necessary - the host OS
can still use the DMA bypass mode (requires a tiny fraction of it_map's
memory) and even if that fails, the host OS is runnnable as it was without
the device for which allocating it_map causes the panic.
Instead of immediately crashing in a powernv/ioda2 system, this prints
an error and continues. All other platforms still call panic().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210216033307.69863-3-aik@ozlabs.ru
Eliminate the following coccicheck warning:
./arch/powerpc/platforms/powernv/setup.c:160:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1612236877-104974-1-git-send-email-yang.lee@linux.alibaba.com
On a kernel config with ALTIVEC=y and PPC_FPU not set/enabled,
there are build errors:
drivers/cpufreq/pmac32-cpufreq.c:262:2: error: implicit declaration of function 'enable_kernel_fp' [-Werror,-Wimplicit-function-declaration]
enable_kernel_fp();
../arch/powerpc/lib/sstep.c: In function 'do_vec_load':
../arch/powerpc/lib/sstep.c:637:3: error: implicit declaration of function 'put_vr' [-Werror=implicit-function-declaration]
637 | put_vr(rn, &u.v);
| ^~~~~~
../arch/powerpc/lib/sstep.c: In function 'do_vec_store':
../arch/powerpc/lib/sstep.c:660:3: error: implicit declaration of function 'get_vr'; did you mean 'get_oc'? [-Werror=implicit-function-declaration]
660 | get_vr(rn, &u.v);
| ^~~~~~
In theory ALTIVEC is independent of PPC_FPU but in practice nobody
is going to build such a machine, so make ALTIVEC require PPC_FPU
by selecting it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210421210647.20836-1-rdunlap@infradead.org
As of today, if the DDW is big enough to fit (1 << MAX_PHYSMEM_BITS)
it's possible to use direct DMA mapping even with pmem region.
But, if that happens, the window size (len) is set to (MAX_PHYSMEM_BITS
- page_shift) instead of MAX_PHYSMEM_BITS, causing a pagesize times
smaller DDW to be created, being insufficient for correct usage.
Fix this so the correct window size is used in this case.
Fixes: bf6e2d562b ("powerpc/dma: Fallback to dma_ops when persistent memory present")
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210420045404.438735-1-leobras.c@gmail.com
RCU complains about us calling printk() from an offline CPU:
=============================
WARNING: suspicious RCU usage
5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted
-----------------------------
kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1
Call Trace:
dump_stack+0xec/0x144 (unreliable)
lockdep_rcu_suspicious+0x124/0x144
__lock_acquire+0x1098/0x28b0
lock_acquire+0x128/0x600
_raw_spin_lock_irqsave+0x6c/0xc0
down_trylock+0x2c/0x70
__down_trylock_console_sem+0x60/0x140
vprintk_emit+0x1a8/0x4b0
vprintk_func+0xcc/0x200
printk+0x40/0x54
pseries_cpu_offline_self+0xc0/0x120
arch_cpu_idle_dead+0x54/0x70
do_idle+0x174/0x4a0
cpu_startup_entry+0x38/0x40
rest_init+0x268/0x388
start_kernel+0x748/0x790
start_here_common+0x1c/0x614
Which happens because by the time we get to rtas_stop_self() we are
already offline. In addition the message can be spammy, and is not that
helpful for users, so remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418135413.1204031-1-mpe@ellerman.id.au
Currently, neither the vio_bus or vio_driver structures provide support
for a shutdown() routine.
Add support for shutdown() by allowing drivers to provide a
implementation via function pointer in their vio_driver struct and
provide a proper implementation in the driver template for the vio_bus
that calls a vio drivers shutdown() if defined.
In the case that no shutdown() is defined by a vio driver and a kexec is
in progress we implement a big hammer that calls remove() to ensure no
further DMA for the devices is possible.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210402001325.939668-1-tyreld@linux.ibm.com
The RTAS set-indicator call, when attempting to UNISOLATE a DRC that is
already UNISOLATED or CONFIGURED, returns RTAS_OK and does nothing else
for both QEMU and phyp. This gives us an opportunity to use this
behavior to signal the hypervisor layer when an error during device
removal happens, allowing it to do a proper error handling, while not
breaking QEMU/phyp implementations that don't have this support.
This patch introduces this idea by unisolating all CPU DRCs that failed
to be removed by dlpar_cpu_remove_by_index(), when handling the
PSERIES_HP_ELOG_ID_DRC_INDEX event. This is being done for this event
only because its the only CPU removal event QEMU uses, and there's no
need at this moment to add this mechanism for phyp only code.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416210216.380291-3-danielhb413@gmail.com
Next patch will execute a set-indicator call in hotplug-cpu.c.
Create a dlpar_unisolate_drc() helper to avoid spreading more
rtas_set_indicator() calls outside of dlpar.c.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416210216.380291-2-danielhb413@gmail.com
The pci_bus->bridge reference may no longer be valid after
pci_bus_remove() resulting in passing a bad value to device_unregister()
for the associated bridge device.
Store the host_bridge reference in a separate variable prior to
pci_bus_remove().
Fixes: 7340056567 ("powerpc/pci: Reorder pci bus/bridge unregistration during PHB removal")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210211182435.47968-1-tyreld@linux.ibm.com
When I changed the rc variable to be long rather than int64_t I
neglected to update the printk(), leading to a build break:
arch/powerpc/platforms/pseries/papr_scm.c: In function 'papr_scm_pmem_flush':
arch/powerpc/platforms/pseries/papr_scm.c:144:26: warning: format
'%lld' expects argument of type 'long long int', but argument 3 has
type 'long int' [-Wformat=]
Fixes: 75b7c05ebf ("powerpc/papr_scm: Implement support for H_SCM_FLUSH hcall")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416111209.765444-2-mpe@ellerman.id.au
Fix sparse warnings:
arch/powerpc/platforms/pseries/rtas-fadump.c:250:6: warning:
symbol 'rtas_fadump_set_regval' was not declared. Should it be static?
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408062012.85973-1-pulehui@huawei.com
The sparse tool complains as follows:
arch/powerpc/platforms/powernv/opal-core.c:74:16: warning:
symbol 'mpipl_kobj' was not declared.
This symbol is not used outside of opal-core.c, so marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409063855.57347-1-cuibixuan@huawei.com
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/pmem.c:142:27: warning:
symbol 'drc_pmem_match' was not declared. Should it be static?
This symbol is not used outside of pmem.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090114.59396-1-cuibixuan@huawei.com
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/hvCall_inst.c:29:1: warning:
symbol '__pcpu_scope_hcall_stats' was not declared. Should it be static?
This symbol is not used outside of hvCall_inst.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090109.59347-1-cuibixuan@huawei.com
According to LoPAR, ibm,query-pe-dma-window output named "IO Page Sizes"
will let the OS know all possible pagesizes that can be used for creating a
new DDW.
Currently Linux will only try using 3 of the 8 available options:
4K, 64K and 16M. According to LoPAR, Hypervisor may also offer 32M, 64M,
128M, 256M and 16G.
Enabling bigger pages would be interesting for direct mapping systems
with a lot of RAM, while using less TCE entries.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408201915.174217-1-leobras.c@gmail.com
Many architectures duplicate similar shell scripts.
This commit converts powerpc to use scripts/syscalltbl.sh. This also
unifies syscall_table_32.h and syscall_table_c32.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301153019.362742-1-masahiroy@kernel.org
Add support for ND_REGION_ASYNC capability if the device tree
indicates 'ibm,hcall-flush-required' property in the NVDIMM node.
Flush is done by issuing H_SCM_FLUSH hcall to the hypervisor.
If the flush request failed, the hypervisor is expected to
to reflect the problem in the subsequent nvdimm H_SCM_HEALTH call.
This patch prevents mmap of namespaces with MAP_SYNC flag if the
nvdimm requires an explicit flush[1].
References:
[1] https://github.com/avocado-framework-tests/avocado-misc-tests/blob/master/memory/ndctl.py.data/map_sync.c
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use unsigned long / long instead of uint64_t/int64_t]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87
Eliminate the following coccicheck warning:
./arch/powerpc/platforms/pseries/lpar.c:1633:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617672785-81372-1-git-send-email-yang.lee@linux.alibaba.com
Let the memory removed from the linear mapping to be used for the trace
buffers be mmaped. This is a useful way of providing cache-inhibited
memory for the alignment_handler selftest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: make memtrace_mmap() static as noticed by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-1-jniethe5@gmail.com
The flags argument to plpar_pte_protect() (aka. H_PROTECT), includes
the key in bits 9-13, but currently we always set those bits to zero.
In the past that hasn't been a problem because we always used key 0
for the kernel, and updateboltedpp() is only used for kernel mappings.
However since commit d94b827e89 ("powerpc/book3s64/kuap: Use Key 3
for kernel mapping with hash translation") we are now inadvertently
changing the key (to zero) when we call plpar_pte_protect().
That hasn't broken anything because updateboltedpp() is only used for
STRICT_KERNEL_RWX, which is currently disabled on 64s due to other
bugs.
But we want to fix that, so first we need to pass the key correctly to
plpar_pte_protect(). We can't pass our newpp value directly in, we
have to convert it into the form expected by the hcall.
The hcall we're using here is H_PROTECT, which is specified in section
14.5.4.1.6 of LoPAPR v1.1.
It takes a `flags` parameter, and the description for flags says:
* flags: AVPN, pp0, pp1, pp2, key0-key4, n, and for the CMO
option: CMO Option flags as defined in Table 189‚
If you then go to the start of the parent section, 14.5.4.1, on page
405, it says:
Register Linkage (For hcall() tokens 0x04 - 0x18)
* On Call
* R3 function call token
* R4 flags (see Table 178‚ “Page Frame Table Access flags field
definition‚” on page 401)
Then you have to go to section 14.5.3, and on page 394 there is a list
of hcalls and their tokens (table 176), and there you can see that
H_PROTECT == 0x18.
Finally you can look at table 178, on page 401, where it specifies the
layout of the bits for the key:
Bit Function
-----------------
50-54 | key0-key4
Those are big-endian bit numbers, converting to normal bit numbers you
get bits 9-13, or 0x3e00.
In the kernel we have:
#define HPTE_R_KEY_HI ASM_CONST(0x3000000000000000)
#define HPTE_R_KEY_LO ASM_CONST(0x0000000000000e00)
So the LO bits of newpp are already in the right place, and the HI
bits need to be shifted down by 48.
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-2-mpe@ellerman.id.au
The vio bus is a fake bus, which we use on pseries LPARs (guests) to
discover devices provided by the hypervisor. There's no need or sense
in creating the vio bus on bare metal systems.
Which is why commit 4336b93378 ("powerpc/pseries: Make vio and
ibmebus initcalls pseries specific") made the initialisation of the
vio bus only happen in LPARs.
However as a result of that commit we now see errors at boot on bare
metal systems:
Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized.
Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized.
This happens because those drivers are built-in, and are calling
vio_register_driver(). It in turn calls driver_register() with a
reference to vio_bus_type, but we haven't registered vio_bus_type with
the driver core.
Fix it by also guarding vio_register_driver() with a check to see if
we are on pseries.
Fixes: 4336b93378 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316010938.525657-1-mpe@ellerman.id.au
One of the reasons that dlpar_cpu_offline can fail is when attempting to
offline the last online CPU of the kernel. This can be observed in a
pseries QEMU guest that has hotplugged CPUs. If the user offlines all
other CPUs of the guest, and a hotplugged CPU is now the last online
CPU, trying to reclaim it will fail.
The current error message in this situation returns rc with -EBUSY and a
generic explanation, e.g.:
pseries-hotplug-cpu: Failed to offline CPU PowerPC,POWER9, rc: -16
EBUSY can be caused by other conditions, such as cpu_hotplug_disable
being true. Throwing a more specific error message for this case,
instead of just "Failed to offline CPU", makes it clearer that the error
is in fact a known error situation instead of other generic/unknown
cause.
This patch adds a 'last online' check in dlpar_cpu_offline() to catch
the 'last online CPU' offline error, eturning a more informative error
message:
pseries-hotplug-cpu: Unable to remove last online CPU PowerPC,POWER9
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210323205056.52768-2-danielhb413@gmail.com
With below two commits:
commit c91435d95c ("powerpc/book3s64/hash/kuep: Enable KUEP on hash")
commit b2ff33a10c ("powerpc/book3s64/hash/kuap: Enable kuap on hash")
the kernel now supports kuap/kuep with hash translation. Hence select the
Kconfig even when radix is disabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034829.72255-1-aneesh.kumar@linux.ibm.com
This is helpful to read the security flavor from inside the LPAR.
In /sys/kernel/debug/powerpc/security_features it can be seen if
mitigations are on or off but not the level set through the ASMI menu.
Furthermore, reporting it through /proc/powerpc/lparcfg allows an easy
processing by the lparstat command [1].
Export it like this in /proc/powerpc/lparcfg:
$ grep security_flavor /proc/powerpc/lparcfg
security_flavor=1
Value follows what is documented on the IBM support page [2]:
0 Speculative execution fully enabled
1 Speculative execution controls to mitigate user-to-kernel attacks
2 Speculative execution controls to mitigate user-to-kernel and
user-to-user side-channel attacks
[1] https://groups.google.com/g/powerpc-utils-devel/c/NaKXvdyl_UI/m/wa2stpIDAQAJ
[2] https://www.ibm.com/support/pages/node/715841
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210305125554.5165-1-ldufour@linux.ibm.com
H_PROTECT expects the flag value to include flags:
AVPN, pp0, pp1, pp2, key0-key4, Noexec, CMO Option flags
This patch updates hpte_updatepp() to fetch the storage key value from
the linux page table and use the same in H_PROTECT hcall.
native_hpte_updatepp() is not updated because the kernel doesn't clear
the existing storage key value there. The kernel also doesn't use
hpte_updatepp() callback for updating storage keys.
This fixes the below kernel crash observed with KUAP enabled.
BUG: Unable to handle kernel data access on write at 0xc009fffffc440000
Faulting instruction address: 0xc0000000000b7030
Key fault AMR: 0xfcffffffffffffff IAMR: 0xc0000077bc498100
Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
...
CFAR: c000000000010100 DAR: c009fffffc440000 DSISR: 02200000 IRQMASK: 0
...
NIP memset+0x68/0x104
LR pcpu_alloc+0x54c/0xb50
Call Trace:
pcpu_alloc+0x55c/0xb50 (unreliable)
blk_stat_alloc_callback+0x94/0x150
blk_mq_init_allocated_queue+0x64/0x560
blk_mq_init_queue+0x54/0xb0
scsi_mq_alloc_queue+0x30/0xa0
scsi_alloc_sdev+0x1cc/0x300
scsi_probe_and_add_lun+0xb50/0x1020
__scsi_scan_target+0x17c/0x790
scsi_scan_channel+0x90/0xe0
scsi_scan_host_selected+0x148/0x1f0
do_scan_async+0x2c/0x2a0
async_run_entry_fn+0x78/0x220
process_one_work+0x264/0x540
worker_thread+0xa8/0x600
kthread+0x190/0x1a0
ret_from_kernel_thread+0x5c/0x6c
With KUAP enabled the kernel uses storage key 3 for all its
translations. But as shown by the debug print, in this specific case we
have the hash page table entry created with key value 0.
Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194
and DSISR indicates a key fault.
This can happen due to parallel fault on the same EA by different CPUs:
CPU 0 CPU 1
fault on X
H_PAGE_BUSY set
fault on X
finish fault handling and
clear H_PAGE_BUSY
check for H_PAGE_BUSY
continue with fault handling.
This implies CPU1 will end up calling hpte_updatepp for address X and
the kernel updated the hash pte entry with key 0
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Reported-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Debugged-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326070755.304625-1-aneesh.kumar@linux.ibm.com
Fixes the following W=1 kernel build warning(s):
drivers/tty/hvc/hvc_vio.c:385:13: warning: no previous prototype for ‘hvc_vio_init_early’
385 | void __init hvc_vio_init_early(void)
| ^~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210303124603.3150175-1-lee.jones@linaro.org
Commit 407d418f2f ("powerpc/chrp: Move PHB discovery") moved the
sole call to hydra_init() to the source file where it is defined, so it
can be made static.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210223095345.2139416-1-geert@linux-m68k.org
The pseries join/suspend sequence in its current form was written with
the assumption that it was the only user of H_PROD and that it needn't
handle spurious successful returns from H_JOIN. That's wrong;
powerpc's paravirt spinlock code uses H_PROD, and CPUs entering
do_join() can be woken prematurely from H_JOIN with a status of
H_SUCCESS as a result. This causes all CPUs to exit the sequence
early, preventing suspend from occurring at all.
Add a 'done' boolean flag to the pseries_suspend_info struct, and have
the waking thread set it before waking the other threads. Threads
which receive H_SUCCESS from H_JOIN retry if the 'done' flag is still
unset.
Fixes: 9327dc0aee ("powerpc/pseries/mobility: use stop_machine for join/suspend")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315080045.460331-3-nathanl@linux.ibm.com
The atomic_t counter is the only shared state for the join/suspend
sequence so far, but that will change. Contain it in a
struct (pseries_suspend_info), and document its intended use. No
functional change.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315080045.460331-2-nathanl@linux.ibm.com
Use the local variable that is passed to swiotlb_init_with_tbl for
freeing the memory in the failure case to isolate the code a little
better from swiotlb internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
clearing everything *except* S_ISGID (including the S_IFDIR, among
other things) is wrong. Just use init_inode_owner() and be done
with that...
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
have dump_skip() just remember how much needs to be skipped,
leave actual seeks/writing zeroes to the next dump_emit()
or the end of coredump output, whichever comes first.
And instead of playing with do_truncate() in the end, just
write one NUL at the end of the last gap (if any).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct vio_driver::remove() return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea.
Note there are two nominally different implementations for a vio bus:
one in arch/sparc/kernel/vio.c and the other in
arch/powerpc/platforms/pseries/vio.c. This patch only adapts the powerpc
one.
Before this patch for a device that was bound to a driver without a
remove callback vio_cmo_bus_remove(viodev) wasn't called. As the device
core still considers the device unbound after vio_bus_remove() returns
calling this unconditionally is the consistent behaviour which is
implemented here.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[mpe: Drop unneeded hvcs_remove() forward declaration, squash in
change from sfr to drop ibmvnic_remove() forward declaration]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225221834.160083-1-uwe@kleine-koenig.org
Depending on the number of online CPUs in the original kernel, it is
likely for CPU #0 to be offline in a kdump kernel. The associated IRQs
in the affinity mappings provided by irq_create_affinity_masks() are
thus not started by irq_startup(), as per-design with managed IRQs.
This can be a problem with multi-queue block devices driven by blk-mq :
such a non-started IRQ is very likely paired with the single queue
enforced by blk-mq during kdump (see blk_mq_alloc_tag_set()). This
causes the device to remain silent and likely hangs the guest at
some point.
This is a regression caused by commit 9ea69a55b3 ("powerpc/pseries:
Pass MSI affinity to irq_create_mapping()"). Note that this only happens
with the XIVE interrupt controller because XICS has a workaround to bypass
affinity, which is activated during kdump with the "noirqdistrib" kernel
parameter.
The issue comes from a combination of factors:
- discrepancy between the number of queues detected by the multi-queue
block driver, that was used to create the MSI vectors, and the single
queue mode enforced later on by blk-mq because of kdump (i.e. keeping
all queues fixes the issue)
- CPU#0 offline (i.e. kdump always succeed with CPU#0)
Given that I couldn't reproduce on x86, which seems to always have CPU#0
online even during kdump, I'm not sure where this should be fixed. Hence
going for another approach : fine-grained affinity is for performance
and we don't really care about that during kdump. Simply revert to the
previous working behavior of ignoring affinity masks in this case only.
Fixes: 9ea69a55b3 ("powerpc/pseries: Pass MSI affinity to irq_create_mapping()")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210215094506.1196119-1-groug@kaod.org
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
Summary of modules changes for the 5.12 merge window:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export
types were introduced between 2006 - 2008. All the of the unused symbols have
been long removed and gpl future symbols were converted to gpl quite a long
time ago, and I don't believe these export types have been used ever since.
So, I think it should be safe to retire those export types now. (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as
it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader. (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before checking
the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T29Q
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
export types were introduced between 2006 - 2008. All the of the
unused symbols have been long removed and gpl future symbols were
converted to gpl quite a long time ago, and I don't believe these
export types have been used ever since. So, I think it should be safe
to retire those export types now (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader
(Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is
enabled, as it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before
checking the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: potential uninitialized return in module_kallsyms_on_each_symbol()
module: remove EXPORT_UNUSED_SYMBOL*
module: remove EXPORT_SYMBOL_GPL_FUTURE
module: move struct symsearch to module.c
module: pass struct find_symbol_args to find_symbol
module: merge each_symbol_section into find_symbol
module: remove each_symbol_in_section
module: mark module_mutex static
kallsyms: only build {,module_}kallsyms_on_each_symbol when required
kallsyms: refactor {,module_}kallsyms_on_each_symbol
module: use RCU to synchronize find_module
module: unexport find_module and module_mutex
drm: remove drm_fb_helper_modinit
powerpc/powernv: remove get_cxl_module
module: harden ELF info handling
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
A large series adding wrappers for our interrupt handlers, so that irq/nmi/user
tracking can be isolated in the wrappers rather than spread in each handler.
Conversion of the 32-bit syscall handling into C.
A series from Nick to streamline our TLB flushing when using the Radix MMU.
Switch to using queued spinlocks by default for 64-bit server CPUs.
A rework of our PCI probing so that it happens later in boot, when more generic
infrastructure is available.
Two small fixes to allow 32-bit little-endian processes to run on 64-bit
kernels.
Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira
Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy,
Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh
Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus
Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan
Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, Zheng
Yongjun.
-----BEGIN PGP SIGNATURE-----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=dB2S
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A large series adding wrappers for our interrupt handlers, so that
irq/nmi/user tracking can be isolated in the wrappers rather than
spread in each handler.
- Conversion of the 32-bit syscall handling into C.
- A series from Nick to streamline our TLB flushing when using the
Radix MMU.
- Switch to using queued spinlocks by default for 64-bit server CPUs.
- A rework of our PCI probing so that it happens later in boot, when
more generic infrastructure is available.
- Two small fixes to allow 32-bit little-endian processes to run on
64-bit kernels.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang
Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian
Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong,
Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu,
Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen
Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun.
* tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits)
powerpc/perf: Adds support for programming of Thresholding in P10
powerpc/pci: Remove unimplemented prototypes
powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user()
powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size()
powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user()
powerpc/64: Fix stack trace not displaying final frame
powerpc/time: Remove get_tbl()
powerpc/time: Avoid using get_tbl()
spi: mpc52xx: Avoid using get_tbl()
powerpc/syscall: Avoid storing 'current' in another pointer
powerpc/32: Handle bookE debugging in C in syscall entry/exit
powerpc/syscall: Do not check unsupported scv vector on PPC32
powerpc/32: Remove the counter in global_dbcr0
powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry
powerpc/syscall: implement system call entry/exit logic in C for PPC32
powerpc/32: Always save non volatile GPRs at syscall entry
powerpc/syscall: Change condition to check MSR_RI
powerpc/syscall: Save r3 in regs->orig_r3
powerpc/syscall: Use is_compat_task()
powerpc/syscall: Make interrupt.c buildable on PPC32
...
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build
host fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device(). In preparation for
this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
-----BEGIN PGP SIGNATURE-----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=9V4A
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device().
In preparation for this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
driver core: platform: Drop of_device_node_put() wrapper
of: Remove of_dev_{get,put}()
dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
dt-bindings: can: rcar_canfd: Group tuples in pin control properties
dt-bindings: power: renesas,apmu: Group tuples in cpus properties
dt-bindings: mtd: spi-nor: Convert to DT schema format
dt-bindings: Use portable sort for version cmp
dt-bindings: ethernet-controller: fix fixed-link specification
dt-bindings: irqchip: Add node name to PRUSS INTC
dt-bindings: interconnect: Fix the expected number of cells
dt-bindings: Fix errors in 'if' schemas
dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
dt-bindings: Fix undocumented compatible strings in examples
kbuild: Add support to build overlays (%.dtbo)
scripts: dtc: Remove the unused fdtdump.c file
scripts: dtc: Build fdtoverlay tool
scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
scripts: dtc: Fetch fdtoverlay.c from external DTC project
dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
dt-bindings: iio: dac: Fix AD5686 references
...
[ NOTE: unfortunately this tree had to be freshly rebased today,
it's a same-content tree of 82891be90f3c (-next published)
merged with v5.11.
The main reason for the rebase was an authorship misattribution
problem with a new commit, which we noticed in the last minute,
and which we didn't want to be merged upstream. The offending
commit was deep in the tree, and dependent commits had to be
rebased as well. ]
- Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full),
to allow distros to build a PREEMPT kernel but fall back to
close to PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling
behavior via a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast majority
of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address
the underlying issue of missed preemption events. These are the
initial fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the following
consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a single pass.
This is a 4-commit series where each commit improves one aspect of the idle
sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU utilization
metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by reducing the number
of active LB attempts & lengthen the load-balancing interval. This improves
stress-ng mmapfork performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can result in
too high utilization values
- Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pyaG
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full), to allow
distros to build a PREEMPT kernel but fall back to close to
PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via
a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of
static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast
majority of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address the
underlying issue of missed preemption events. These are the initial
fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the
following consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a
single pass. This is a 4-commit series where each commit improves
one aspect of the idle sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU
utilization metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by
reducing the number of active LB attempts & lengthen the
load-balancing interval. This improves stress-ng mmapfork
performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can
result in too high utilization values
Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups"
* tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
sched,x86: Allow !PREEMPT_DYNAMIC
entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point
entry: Explicitly flush pending rcuog wakeup before last rescheduling point
rcu/nocb: Trigger self-IPI on late deferred wake up before user resume
rcu/nocb: Perform deferred wake up before last idle's need_resched() check
rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
sched/features: Distinguish between NORMAL and DEADLINE hrtick
sched/features: Fix hrtick reprogramming
sched/deadline: Reduce rq lock contention in dl_add_task_root_domain()
uprobes: (Re)add missing get_uprobe() in __find_uprobe()
smp: Process pending softirqs in flush_smp_call_function_from_idle()
sched: Harden PREEMPT_DYNAMIC
static_call: Allow module use without exposing static_call_key
sched: Add /debug/sched_preempt
preempt/dynamic: Support dynamic preempt with preempt= boot option
preempt/dynamic: Provide irqentry_exit_cond_resched() static call
preempt/dynamic: Provide preempt_schedule[_notrace]() static calls
preempt/dynamic: Provide cond_resched() and might_resched() static calls
preempt: Introduce CONFIG_PREEMPT_DYNAMIC
static_call: Provide DEFINE_STATIC_CALL_RET0()
...
The "oprofile" user-space tools don't use the kernel OPROFILE support any more,
and haven't in a long time. User-space has been converted to the perf
interfaces.
The dcookies stuff is only used by the oprofile code. Now that oprofile's
support is getting removed from the kernel, there is no need for dcookies as
well.
Remove kernel's old oprofile and dcookies support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=I2Ac
-----END PGP SIGNATURE-----
Merge tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux
Pull oprofile and dcookies removal from Viresh Kumar:
"Remove oprofile and dcookies support
The 'oprofile' user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
The dcookies stuff is only used by the oprofile code. Now that
oprofile's support is getting removed from the kernel, there is no
need for dcookies as well.
Remove kernel's old oprofile and dcookies support"
* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
fs: Remove dcookies support
drivers: Remove CONFIG_OPROFILE support
arch: xtensa: Remove CONFIG_OPROFILE support
arch: x86: Remove CONFIG_OPROFILE support
arch: sparc: Remove CONFIG_OPROFILE support
arch: sh: Remove CONFIG_OPROFILE support
arch: s390: Remove CONFIG_OPROFILE support
arch: powerpc: Remove oprofile
arch: powerpc: Stop building and using oprofile
arch: parisc: Remove CONFIG_OPROFILE support
arch: mips: Remove CONFIG_OPROFILE support
arch: microblaze: Remove CONFIG_OPROFILE support
arch: ia64: Remove rest of perfmon support
arch: ia64: Remove CONFIG_OPROFILE support
arch: hexagon: Don't select HAVE_OPROFILE
arch: arc: Remove CONFIG_OPROFILE support
arch: arm: Remove CONFIG_OPROFILE support
arch: alpha: Remove CONFIG_OPROFILE support
The only remaining use of MAX_USER_PRIO (and USER_PRIO) is the
SCALE_PRIO() definition in the PowerPC Cell architecture's Synergistic
Processor Unit (SPU) scheduler. TASK_USER_PRIO isn't used anymore.
Commit fe443ef2ac ("[POWERPC] spusched: Dynamic timeslicing for
SCHED_OTHER") copied SCALE_PRIO() from the task scheduler in v2.6.23.
Commit a4ec24b48d ("sched: tidy up SCHED_RR") removed it from the task
scheduler in v2.6.24.
Commit 3ee237dddc ("sched/prio: Add 3 macros of MAX_NICE, MIN_NICE and
NICE_WIDTH in prio.h") introduced NICE_WIDTH much later.
With:
MAX_USER_PRIO = USER_PRIO(MAX_PRIO)
= MAX_PRIO - MAX_RT_PRIO
MAX_PRIO = MAX_RT_PRIO + NICE_WIDTH
MAX_USER_PRIO = MAX_RT_PRIO + NICE_WIDTH - MAX_RT_PRIO
MAX_USER_PRIO = NICE_WIDTH
MAX_USER_PRIO can be replaced by NICE_WIDTH to be able to remove all the
{*_}USER_PRIO defines.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210128131040.296856-3-dietmar.eggemann@arm.com
of_dev_get() and of_dev_put are just wrappers for get_device()/put_device()
on a platform_device. There's also already platform_device_{get,put}()
wrappers for this purpose. Let's update the few users and remove
of_dev_{get,put}().
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Gilles Muller <Gilles.Muller@inria.fr>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-usb@vger.kernel.org
Cc: cocci@systeme.lip6.fr
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210211232745.1498137-2-robh@kernel.org
We added dcache flush on memory add/remove in commit
fb5924fddf ("powerpc/mm: Flush cache on memory hot(un)plug") to
handle crashes on GPU hotplug. Instead of adding dcache flush in
generic memory add/remove routine which is used even for regular
memory, we should handle these devices specific flush in the device
driver code.
memtrace did handle this in the driver and that was removed by commit
7fd6641de2 ("powerpc/powernv/memtrace: Let the arch hotunplug code
flush cache"). This patch reverts that commit.
The dcache flush in memory add was removed by commit
ea458effa8 ("powerpc: Don't flush caches when adding memory") which
I don't think is correct. The reason why we require dcache flush in
memtrace is to make sure we don't have a dirty cache when we remap a
pfn to cache inhibited. We should do that when the memtrace module
removes the memory and make the pfn available for HTM traces to map it
as cache inhibited.
The other device mentioned in commit fb5924fddf ("powerpc/mm: Flush
cache on memory hot(un)plug") is nvlink device with coherent memory.
The support for that was removed in commit
7eb3cf7619 ("powerpc/powernv: remove unused NPU DMA code") and
commit 25b2995a35 ("mm: remove MEMORY_DEVICE_PUBLIC support")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210203045812.234439-3-aneesh.kumar@linux.ibm.com
As reported by lkp:
arch/powerpc/platforms/83xx/km83xx.c:183:19: error: 'mpc83xx_setup_pci' undeclared here (not in a function)
183 | .discover_phbs = mpc83xx_setup_pci,
| ^~~~~~~~~~~~~~~~~
| mpc83xx_setup_arch
There is a stub defined for the CONFIG_PCI=n case, but now that
mpc83xx_setup_pci() is being assigned to discover_phbs the correct
empty value is NULL.
Fixes: 83f84041ff ("powerpc/83xx: Move PHB discovery")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210210130804.3190952-1-mpe@ellerman.id.au
As part of commit fbbefb3202 ("powerpc/pci: Move PHB discovery for
PCI_DN using platforms"), I switched some allocations from
memblock_alloc() to kmalloc(), otherwise memblock would warn that it
was being called after slab init.
However I missed that the code relied on the allocations being zeroed,
without which we could end up crashing:
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
BUG: Unable to handle kernel data access on read at 0x6b6b6b6b6b6b6af7
Faulting instruction address: 0xc0000000000dbc90
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
...
NIP pnv_ioda_get_pe_state+0xe0/0x1d0
LR pnv_ioda_get_pe_state+0xb4/0x1d0
Call Trace:
pnv_ioda_get_pe_state+0xb4/0x1d0 (unreliable)
pnv_pci_config_check_eeh.isra.9+0x78/0x270
pnv_pci_read_config+0xf8/0x160
pci_bus_read_config_dword+0xa4/0x120
pci_bus_generic_read_dev_vendor_id+0x54/0x270
pci_scan_single_device+0xb8/0x140
pci_scan_slot+0x80/0x1b0
pci_scan_child_bus_extend+0x94/0x490
pcibios_scan_phb+0x1f8/0x3c0
pcibios_init+0x8c/0x12c
do_one_initcall+0x94/0x510
kernel_init_freeable+0x35c/0x3fc
kernel_init+0x2c/0x168
ret_from_kernel_thread+0x5c/0x70
Switch them to kzalloc().
Fixes: fbbefb3202 ("powerpc/pci: Move PHB discovery for PCI_DN using platforms")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210211112749.3410771-1-mpe@ellerman.id.au
dlpar_configure_connector() has two problems in its handling of
ibm,configure-connector's return status:
1. When the status is -2 (busy, call again), we call
ibm,configure-connector again immediately without checking whether
to schedule, which can result in monopolizing the CPU.
2. Extended delay status (9900..9905) goes completely unhandled,
causing the configuration to unnecessarily terminate.
Fix both of these issues by using rtas_busy_delay().
Fixes: ab519a011c ("powerpc/pseries: Kernel DLPAR Infrastructure")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210107025900.410369-1-nathanl@linux.ibm.com
The AKEBONO config has various selects under it, including some with
user-selectable dependencies, which means those dependencies can be
disabled. This leads to warnings from Kconfig.
This can be seen with eg:
$ make allnoconfig
$ ./scripts/config --file build~/.config -k -e CONFIG_44x -k -e CONFIG_PPC_47x -e CONFIG_AKEBONO
$ make olddefconfig
WARNING: unmet direct dependencies detected for ATA
Depends on [n]: HAS_IOMEM [=y] && BLOCK [=n]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
WARNING: unmet direct dependencies detected for NETDEVICES
Depends on [n]: NET [=n]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
WARNING: unmet direct dependencies detected for ETHERNET
Depends on [n]: NETDEVICES [=y] && NET [=n]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
WARNING: unmet direct dependencies detected for MMC_SDHCI
Depends on [n]: MMC [=n] && HAS_DMA [=y]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
WARNING: unmet direct dependencies detected for MMC_SDHCI_PLTFM
Depends on [n]: MMC [=n] && MMC_SDHCI [=y]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
The problem is that AKEBONO is using select to enable things that are
not true dependencies, but rather things you probably want enabled in
an AKEBONO kernel. That is what a defconfig is for.
So drop those selects and instead move those symbols into the
defconfig. This fixes all the kconfig warnings, and the result of make
44x/akebono_defconfig is the same before and after the patch.
Reported-by: Yury Norov <yury.norov@gmail.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210201012503.940145-1-mpe@ellerman.id.au
The pseries real-mode machine check handler can enable the MMU, and
return from the handler with the MMU still enabled.
This works, but real-mode handler wrapper exit handlers want to rely
on the MMU being in real-mode. So change the pseries handler to
restore the MSR after it has finished virtual mode tasks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1612702361.lm7fqo56re.astroid@bobo.none
As explained by commit daf00ae71d ("powerpc/traps: restore
recoverability of machine_check interrupts"), die() can't be called from
within nmi_enter to nicely kill a process context that was interrupted.
nmi_exit must be called first.
This adds a function die_mce which takes care of this for machine check
handlers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-24-npiggin@gmail.com
Similar to the previous patch this makes interrupt handler function
types more regular so they can be wrapped with the next patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-12-npiggin@gmail.com
Make powernv, pseries, powermac and maple use ppc_mc.discover_phbs.
These platforms need to be done together because they all depend on
pci_dn's being created from the DT. The pci_dn contains a pointer to
the relevant pci_controller so they need to be created after the
pci_controller structures are available, but before PCI devices are
scanned. Currently this ordering is provided by initcalls and the
sequence is:
1. PHBs are discovered (setup_arch) (early boot, pre-initcalls)
2. pci_dn are created from the unflattended DT (core initcall)
3. PHBs are scanned pcibios_init() (subsys initcall)
The new ppc_md.discover_phbs() function is also a core_initcall so we
can't guarantee ordering between the creation of pci_controllers and
the creation of pci_dn's which require a pci_controller. We could use
the postcore, or core_sync initcall levels, but it's cleaner to just
move the pci_dn setup into the per-PHB inits which occur inside of
.discover_phb() for these platforms. This brings the boot-time path in
line with the PHB hotplug path that is used for pseries DLPAR
operations too.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Squash powermac & maple in to avoid breakage those platforms,
convert memblock allocs to use kmalloc to avoid warnings]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201103043523.916109-2-oohall@gmail.com
The static inline get_cxl_module function is entirely unused since commit
8bf6b91a51 ("Revert "powerpc/powernv: Add support for the cxl kernel
api on the real phb"), so remove it.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The pnv_phb->initialized flag is an odd beast. It was added back in 2012 in
commit db1266c852 ("powerpc/powernv: Skip check on PE if necessary") to
allow devices to be enabled even if the device had not yet been assigned to
a PE. Allowing the device to be enabled before the PE is configured may
cause spurious EEH events since none of the IOMMU context has been setup.
I'm not entirely sure why this was ever necessary. My best guess is that it
was an workaround for a bug or some other undesireable behaviour from the
PCI core. Either way, it's unnecessary now since as of commit dc3d8f85bb
("powerpc/powernv/pci: Re-work bus PE configuration") we can guarantee that
the PE will be configured before the PCI core will allow drivers to bind to
the device.
It's also worth pointing out that the ->initialized flag is only set in
pnv_pci_ioda_create_dbgfs(). That function has its entire body wrapped
in #ifdef CONFIG_DEBUG_FS. As a result, for kernels built without debugfs
(i.e. petitboot) the other checks in pnv_pci_enable_device_hook() are
bypassed entirely.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902013657.1753830-1-oohall@gmail.com
Adjust jump targets so that a bit of exception handling can be better
reused at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1a4bafee-562f-5eb4-d2bd-34704f8c5ab3@web.de
A null pointer would be passed to a call of the function “of_node_put”
immediately after a call of the function “of_find_compatible_node” failed
at one place.
Remove this superfluous function call.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9c060a41-438b-6fb8-d549-37c72fae4898@web.de
Omit an extra message for a memory allocation failure in this function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/535cfec2-782f-61ec-f6fb-c50186ead2af@web.de
A null pointer would be passed to a call of the function “kfree”
immediately after a call of the function “kstrdup” failed at one place.
Remove this superfluous function call.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b46cc4ff-a14c-0c10-0c0c-95573a960178@web.de
The VAS device allocates a generic interrupt to handle page faults but
the IRQ name doesn't show under /proc. This is because it's on
stack. Allocate the name.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201212142707.2102141-1-clg@kaod.org
Only used locally. It fixes this W=1 compile error :
../arch/powerpc/platforms/pseries/eeh_pseries.c:697:5: error: no previous prototype for ‘pseries_send_allow_unfreeze’ [-Werror=missing-prototypes]
697 | int pseries_send_allow_unfreeze(struct pci_dn *pdn,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-24-clg@kaod.org
These are only used locally. It fixes these W=1 compile errors :
../arch/powerpc/platforms/pseries/setup.c:610:17: error: no previous prototype for ‘pseries_get_iov_fw_value’ [-Werror=missing-prototypes]
610 | resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno,
| ^~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/setup.c:646:6: error: no previous prototype for ‘of_pci_set_vf_bar_size’ [-Werror=missing-prototypes]
646 | void of_pci_set_vf_bar_size(struct pci_dev *dev, const int *indexes)
| ^~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/setup.c:668:6: error: no previous prototype for ‘of_pci_parse_iov_addrs’ [-Werror=missing-prototypes]
668 | void of_pci_parse_iov_addrs(struct pci_dev *dev, const int *indexes)
| ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-22-clg@kaod.org
init_ras_hotplug_IRQ() is a local routine used by a machine init call
and it doesn't need to be external.
It fixes this W=1 compile error:
../arch/powerpc/platforms/pseries/ras.c:125:12: error: no previous prototype for ‘init_ras_hotplug_IRQ’ [-Werror=missing-prototypes]
125 | int __init init_ras_hotplug_IRQ(void)
| ^~~~~~~~~~~~~~~~~~~~
Fixes: c9dccf1d07 ("powerpc/pseries: Enable RAS hotplug events later")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-5-clg@kaod.org
pseries_pcibios_bus_add_device() is a local routine defining the
pcibios_bus_add_device() handler of the pseries machine in
eeh_pseries_init(). It doesn't need to be external.
It fixes this W=1 compile error:
../arch/powerpc/platforms/pseries/eeh_pseries.c:46:6: error: no previous prototype for ‘pseries_pcibios_bus_add_device’ [-Werror=missing-prototypes]
46 | void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: dae7253f9f ("powerpc/pseries: Add pseries SR-IOV Machine dependent calls")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-4-clg@kaod.org
The last use of 'status' was removed in 2012. Remove the variable to
fix this W=1 compile error.
../arch/powerpc/platforms/pseries/ras.c: In function ‘ras_epow_interrupt’:
../arch/powerpc/platforms/pseries/ras.c:318:6: error: variable ‘status’ set but not used [-Werror=unused-but-set-variable]
318 | int status;
| ^~~~~~
Fixes: 55fc0c5617 ("powerpc/pseries: Parse and handle EPOW interrupts")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-3-clg@kaod.org
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
This commits stops building oprofile for powerpc and removes any
reference to it from directories in arch/powerpc/ apart from
arch/powerpc/oprofile, which will be removed in the next commit (this is
broken into two commits as the size of the commit became very big, ~5k
lines).
Note that the member "oprofile_cpu_type" in "struct cpu_spec" isn't
removed as it was also used by other parts of the code.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Preparations to doing i386 compat elf_prstatus sanely - rather than duplicating
the beginning of compat_elf_prstatus, take these fields into a separate
structure (compat_elf_prstatus_common), so that it could be reused. Due to
the incestous relationship between binfmt_elf.c and compat_binfmt_elf.c we
need the same shape change done to native struct elf_prstatus, gathering the
fields prior to pr_reg into a new structure (struct elf_prstatus_common).
Fortunately, offset of pr_reg is always a multiple of 16 with no padding
right before it, so it's possible to turn all the stuff prior to it into
a single member without disturbing the layout.
[build fix from Geert Uytterhoeven folded in]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
-----BEGIN PGP SIGNATURE-----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=dOug
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
* tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping:
selftests/dma: add test application for DMA_MAP_BENCHMARK
dma-mapping: add benchmark support for streaming DMA APIs
dma-contiguous: fix a typo error in a comment
dma-pool: no need to check return value of debugfs_create functions
powerpc/dma: Fallback to dma_ops when persistent memory present
dma-mapping: Allow mixing bypass and mapped DMA operation
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the hashed
page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core do not
share an L2, allowing the scheduler to make better scheduling decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various parts of
the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to:
Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard
Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater,
Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David
Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert
Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan
Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh
Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov,
Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior ,
Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König,
Vincent Stehlé, Youling Tang, Zhang Xiaoxu.
-----BEGIN PGP SIGNATURE-----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=Ga3K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the
hashed page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core
do not share an L2, allowing the scheduler to make better scheduling
decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various
parts of the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.
* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
powerpc: Add config fragment for disabling -Werror
powerpc/configs: Add ppc64le_allnoconfig target
powerpc/powernv: Rate limit opal-elog read failure message
powerpc/pseries/memhotplug: Quieten some DLPAR operations
powerpc/ps3: use dma_mapping_error()
powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
KVM: PPC: fix comparison to bool warning
KVM: PPC: Book3S: Assign boolean values to a bool variable
powerpc: Inline setup_kup()
powerpc/64s: Mark the kuap/kuep functions non __init
KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
powerpc/xive: Improve error reporting of OPAL calls
powerpc/xive: Simplify xive_do_source_eoi()
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
...
Pull execve updates from Eric Biederman:
"This set of changes ultimately fixes the interaction of posix file
lock and exec. Fundamentally most of the change is just moving where
unshare_files is called during exec, and tweaking the users of
files_struct so that the count of files_struct is not unnecessarily
played with.
Along the way fcheck and related helpers were renamed to more
accurately reflect what they do.
There were also many other small changes that fell out, as this is the
first time in a long time much of this code has been touched.
Benchmarks haven't turned up any practical issues but Al Viro has
observed a possibility for a lot of pounding on task_lock. So I have
some changes in progress to convert put_files_struct to always rcu
free files_struct. That wasn't ready for the merge window so that will
have to wait until next time"
* 'exec-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
exec: Move io_uring_task_cancel after the point of no return
coredump: Document coredump code exclusively used by cell spufs
file: Remove get_files_struct
file: Rename __close_fd_get_file close_fd_get_file
file: Replace ksys_close with close_fd
file: Rename __close_fd to close_fd and remove the files parameter
file: Merge __alloc_fd into alloc_fd
file: In f_dupfd read RLIMIT_NOFILE once.
file: Merge __fd_install into fd_install
proc/fd: In fdinfo seq_show don't use get_files_struct
bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu
proc/fd: In proc_readfd_common use task_lookup_next_fd_rcu
file: Implement task_lookup_next_fd_rcu
kcmp: In get_file_raw_ptr use task_lookup_fd_rcu
proc/fd: In tid_fd_mode use task_lookup_fd_rcu
file: Implement task_lookup_fd_rcu
file: Rename fcheck lookup_fd_rcu
file: Replace fcheck_files with files_lookup_fd_rcu
file: Factor files_lookup_fd_locked out of fcheck_files
file: Rename __fcheck_files to files_lookup_fd_raw
...
Sometimes we can't read an error log from OPAL, and we print an error
message accordingly. But the OPAL userspace tools seem to like retrying a
lot, in which case we flood the kernel log with a lot of messages.
Change pr_err() to pr_err_ratelimited() to help with this.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201211021140.28402-1-ajd@linux.ibm.com
When attempting to remove by index a set of LMBs a lot of messages are
displayed on the console, even when everything goes fine:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 8000002d
Offlined Pages 4096
pseries-hotplug-mem: Memory at 2d0000000 was hot-removed
The 2 messages prefixed by "pseries-hotplug-mem" are not really
helpful for the end user, they should be debug outputs.
In case of error, because some of the LMB's pages couldn't be
offlined, the following is displayed on the console:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 8000003e
pseries-hotplug-mem: Failed to hot-remove memory at 3e0000000
dlpar: Could not handle DLPAR request "memory remove index 0x8000003e"
Again, the 2 messages prefixed by "pseries-hotplug-mem" are useless,
and the generic DLPAR prefixed message should be enough.
These 2 first changes are mainly triggered by the changes introduced
in drmgr:
https://groups.google.com/g/powerpc-utils-devel/c/Y6ef4NB3EzM/m/9cu5JHRxAQAJ
Also, when adding a bunch of LMBs, a message is displayed in the console per LMB
like these ones:
pseries-hotplug-mem: Memory at 7e0000000 (drc index 8000007e) was hot-added
pseries-hotplug-mem: Memory at 7f0000000 (drc index 8000007f) was hot-added
pseries-hotplug-mem: Memory at 800000000 (drc index 80000080) was hot-added
pseries-hotplug-mem: Memory at 810000000 (drc index 80000081) was hot-added
When adding 1TB of memory and LMB size is 256MB, this leads to 4096
messages to be displayed on the console. These messages are not really
helpful for the end user, so moving them to the DEBUG level.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[mpe: Tweak change log wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201211145954.90143-1-ldufour@linux.ibm.com
This is way to catch some cases of decrementer overflow, when the
decrementer has underflowed an odd number of times, while MSR[EE] was
disabled.
With a typical small decrementer, a timer that fires when MSR[EE] is
disabled will be "lost" if MSR[EE] remains disabled for between 4.3 and
8.6 seconds after the timer expires. In any case, the decrementer
interrupt would be taken at 8.6 seconds and the timer would be found at
that point.
So this check is for catching extreme latency events, and it prevents
those latencies from being a further few seconds long. It's not obvious
this is a good tradeoff. This is already a watchdog magnitude event and
that situation is not improved a significantly with this check. For
large decrementers, it's useless.
Therefore remove this check, which avoids a mftb when enabling hard
disabled interrupts (e.g., when enabling after coming from hardware
interrupt handlers). Perhaps more importantly, it also removes the
clunky MSR[EE] vs PACA_IRQ_HARD_DIS incoherency in soft-interrupt replay
which simplifies the code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201107014336.2337337-1-npiggin@gmail.com
There is no big poing in not pinning kernel text anymore, as now
we can keep pinned TLB even with things like DEBUG_PAGEALLOC.
Remove CONFIG_PIN_TLB_TEXT, making it always right.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop ifdef around mmu_pin_tlb() to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/203b89de491e1379f1677a2685211b7c32adfff0.1606231483.git.christophe.leroy@csgroup.eu
When SMC1 is relocated and early debug is selected, the
board hangs is ppc_md.setup_arch(). This is because ones
the microcode has been loaded and SMC1 relocated, early
debug writes in the weed.
To allow smooth continuation, the SMC1 parameter RAM set up
by the bootloader have to be copied into the new location.
Fixes: 43db76f418 ("powerpc/8xx: Add microcode patch to move SMC parameter RAM.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b2f71f39eca543f1e4ec06596f09a8b12235c701.1607076683.git.christophe.leroy@csgroup.eu
book3s/32 has two main families:
- CPU with 603 cores that don't have HASH PTE table and
perform SW TLB loading.
- Other CPUs based on 604+ cores that have HASH PTE table.
This leads to some complex logic and additionnal code to
support both. This makes sense for distribution kernels
that aim at running on any CPU, but when you are fine
tuning a kernel for an embedded 603 based board you
don't need all the HASH logic.
Allow selection of support for each family, in order to opt
out unneeded parts of code. At least one must be selected.
Note that some of the CPU supporting HASH also support SW TLB
loading, however it is not supported by Linux kernel at the
time being, because they do not have alternate registers in
the TLB miss exception handlers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8dde0cdb629a71abc29b0d85a52a86e920376cb6.1603348103.git.christophe.leroy@csgroup.eu
low_sleep_handler() can't restore the context from standard
stack because the stack can hardly be accessed with MMU OFF.
Store everything in a global storage area instead of storing
a pointer to the stack in that global storage area.
To avoid a complete churn of the function, still use r1 as
the pointer to the storage area during restore.
Fixes: cd08f109e2 ("powerpc/32s: Enable CONFIG_VMAP_STACK")
Reported-by: Giuseppe Sacco <giuseppe@sguazz.it>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Giuseppe Sacco <giuseppe@sguazz.it>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e3e0d8042a3ba75cb4a9546c19c408b5b5b28994.1607404931.git.christophe.leroy@csgroup.eu
In pseries_devicetree_update(), with each call to ibm,update-nodes the
partition firmware communicates the node to be deleted or updated by
placing its phandle in the work buffer. Each of delete_dt_node(),
update_dt_node(), and add_dt_node() have duplicate lookups using the
phandle value and corresponding refcount management.
Move the lookup and of_node_put() into pseries_devicetree_update(),
and emit a warning on any failed lookups.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-29-nathanl@linux.ibm.com
The pseries hibernate code no longer calls into the original
join/suspend code in kernel/rtas.c, so pseries_prepare_late() and
related code don't accomplish anything now.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-27-nathanl@linux.ibm.com
The pseries hibernate code calls post_mobility_fixup() which is sort
of a dumping ground of fixups that need to run after resuming from
suspend regardless of whether suspend was a hibernation or a
migration. Calling post_mobility_fixup() from
pseries_suspend_enable_irqs() runs this code early in resume with
devices suspended and only one CPU up, while the much more commonly
used migration case runs these fixups in a more typical process
context.
Call post_mobility_fixup() after the suspend core returns a success
status to the hibernate sysfs store method and remove
pseries_suspend_enable_irqs().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-26-nathanl@linux.ibm.com
Partitions with cache nodes in the device tree can encounter the
following warning on resume:
CPU 0 already accounted in PowerPC,POWER9@0(Data)
WARNING: CPU: 0 PID: 3177 at arch/powerpc/kernel/cacheinfo.c:197 cacheinfo_cpu_online+0x640/0x820
These calls to cacheinfo_cpu_offline/online have been redundant since
commit e610a466d1 ("powerpc/pseries/mobility: rebuild cacheinfo
hierarchy post-migration").
Fixes: e610a466d1 ("powerpc/pseries/mobility: rebuild cacheinfo hierarchy post-migration")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-25-nathanl@linux.ibm.com
rtas_suspend_last_cpu() and related code perform a lot of work that
isn't relevant to the hibernation workflow. All other CPUs are offline
when called so there is no need to place them in H_JOIN or prod them
on resume, nor is there need for retries or operations on shared
state.
Call the rtas_ibm_suspend_me() wrapper function directly from
pseries_suspend_enter() instead of using rtas_suspend_last_cpu().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-23-nathanl@linux.ibm.com
Since commit 48f6e7f6d9 ("powerpc/pseries: remove cede offline state
for CPUs"), ppc_md.suspend_disable_cpu() is no longer used and all
CPUs (save one) are placed into true offline state as opposed to
H_JOIN. So pseries_suspend_cpu() is effectively unused; remove it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-20-nathanl@linux.ibm.com
There is no need for the stream id to be a file-global variable; pass
it from hibernate_store() to pseries_suspend_begin() for the
H_VASI_STATE call.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-19-nathanl@linux.ibm.com
There are three ways pseries_suspend_begin() can be reached:
1. When "mem" is written to /sys/power/state:
kobj_attr_store()
-> state_store()
-> pm_suspend()
-> suspend_devices_and_enter()
-> pseries_suspend_begin()
This never works because there is no way to supply a valid stream id
using this interface, and H_VASI_STATE is called with a stream id of
zero. So this call path is useless at best.
2. When a stream id is written to /sys/devices/system/power/hibernate.
pseries_suspend_begin() is polled directly from store_hibernate()
until the stream is in the "Suspending" state (i.e. the platform is
ready for the OS to suspend execution):
dev_attr_store()
-> store_hibernate()
-> pseries_suspend_begin()
3. When a stream id is written to /sys/devices/system/power/hibernate
(continued). After #2, pseries_suspend_begin() is called once again
from the pm core:
dev_attr_store()
-> store_hibernate()
-> pm_suspend()
-> suspend_devices_and_enter()
-> pseries_suspend_begin()
This is redundant because the VASI suspend state is already known to
be Suspending.
The begin() callback of platform_suspend_ops is optional, so we can
simply remove that assignment with no loss of function.
Fixes: 32d8ad4e62 ("powerpc/pseries: Partition hibernation support")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-18-nathanl@linux.ibm.com
sys_rtas() cannot call ibm,suspend-me directly in the same way it
handles other inputs. Instead it must dispatch the request to code
that can first perform the H_JOIN sequence before any call to
ibm,suspend-me can succeed. Over time kernel/rtas.c has accreted a fair
amount of platform-specific code to implement this.
Since a different, more robust implementation of the suspend sequence
is now in the pseries platform code, we want to dispatch the request
there.
Note that invoking ibm,suspend-me via the RTAS syscall is all but
deprecated; this change preserves ABI compatibility for old programs
while providing to them the benefit of the new partition suspend
implementation. This is a behavior change in that the kernel performs
the device tree update and firmware activation before returning, but
experimentation indicates this is tolerated fine by legacy user space.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-16-nathanl@linux.ibm.com
This is a mitigation for the relatively rare occurrence where a
virtual IOA can be in a transient state that prevents the
suspend/migration from succeeding, resulting in an error from
ibm,suspend-me.
If the join/suspend sequence returns an error, it is acceptable to
retry as long as the VASI suspend session state is still
"Suspending" (i.e. the platform is still waiting for the OS to
suspend).
Retry a few times on suspend failure while this condition holds,
progressively increasing the delay between attempts. We don't want to
retry indefinitey because firmware emits an error log event on each
unsuccessful attempt.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-15-nathanl@linux.ibm.com
If we're returning an error to user space, use H_VASI_SIGNAL to send a
cancellation request to the platform. This isn't strictly required but
it communicates that Linux will not attempt to complete the suspend,
which allows the various entities involved to promptly end the
operation in progress.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-14-nathanl@linux.ibm.com
The partition suspend sequence as specified in the platform
architecture requires that all active processor threads call
H_JOIN, which:
- suspends the calling thread until it is the target of
an H_PROD; or
- immediately returns H_CONTINUE, if the calling thread is the last to
call H_JOIN. This thread is expected to call ibm,suspend-me to
completely suspend the partition.
Upon returning from ibm,suspend-me the calling thread must wake all
others using H_PROD.
rtas_ibm_suspend_me_unsafe() uses on_each_cpu() to implement this
protocol, but because of its synchronizing nature this is susceptible
to deadlock versus users of stop_machine() or other callers of
on_each_cpu().
Not only is stop_machine() intended for use cases like this, it
handles error propagation and allows us to keep the data shared
between CPUs minimal: a single atomic counter which ensures exactly
one CPU will wake the others from their joined states.
Switch the migration code to use stop_machine() and a less complex
local implementation of the H_JOIN/ibm,suspend-me logic, which
carries additional benefits:
- more informative error reporting, appropriately ratelimited
- resets the lockup detector / watchdog on resume to prevent lockup
warnings when the OS has been suspended for a time exceeding the
threshold.
Fixes: 91dc182ca6 ("[PATCH] powerpc: special-case ibm,suspend-me RTAS call")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-13-nathanl@linux.ibm.com
The behavior of rtas_ibm_suspend_me_unsafe() is to return -EAGAIN to
the caller until the specified VASI suspend session state makes the
transition from H_VASI_ENABLED to H_VASI_SUSPENDING. In the interest
of separating concerns to prepare for a new implementation of the
join/suspend sequence, extract VASI session polling logic into a
couple of local functions. Waiting for the session state to reach
H_VASI_SUSPENDING before calling rtas_ibm_suspend_me_unsafe() ensures
that we will never get an EAGAIN result necessitating a retry. No
user-visible change in behavior is intended.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-12-nathanl@linux.ibm.com
It's incorrect to abort post-suspend processing if
ibm,activate-firmware isn't available. Use rtas_activate_firmware(),
which logs this condition appropriately and allows us to proceed.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-11-nathanl@linux.ibm.com
- Convert printk(KERN_ERR) to pr_err().
- Include errno in property update failure message.
- Remove reference to "Post-mobility" from device tree update message:
with pr_err() it will have a "mobility:" prefix.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-10-nathanl@linux.ibm.com
Treat the absence of the ibm,update-nodes function as benign instead
of reporting an error. If the platform does not provide that facility,
it's not a problem for Linux.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-8-nathanl@linux.ibm.com
The pseries partition suspend sequence requires that all active CPUs
call H_JOIN, which suspends all but one of them with interrupts
disabled. The "chosen" CPU is then to call ibm,suspend-me to complete
the suspend. Upon returning from ibm,suspend-me, the chosen CPU is to
use H_PROD to wake the joined CPUs.
Using on_each_cpu() for this, as rtas_ibm_suspend_me() does to
implement partition migration, is susceptible to deadlock with other
users of on_each_cpu() and with users of stop_machine APIs. The
callback passed to on_each_cpu() is not allowed to synchronize with
other CPUs in the way it is used here.
Complicating the fix is the fact that rtas_ibm_suspend_me() also
occupies the function name that should be used to provide a more
conventional wrapper for ibm,suspend-me. Rename rtas_ibm_suspend_me()
to rtas_ibm_suspend_me_unsafe() to free up the name and indicate that
it should not gain users.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-4-nathanl@linux.ibm.com
On Power9, CIABR is lost after idle. This means that instruction
breakpoints set by xmon which use CIABR do not work. Fix this by
restoring CIABR after idle.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207010519.15597-2-jniethe5@gmail.com
- Make multiqueue devices which use the managed interrupt affinity
infrastructure work on PowerPC/Pseries. PowerPC does not use the
generic infrastructure for setting up PCI/MSI interrupts and the
multiqueue changes failed to update the legacy PCI/MSI infrastructure.
Make this work by passing the affinity setup information down to the
mapping and allocation functions.
- Move Jason Cooper from MAINTAINERS to CREDITS as his mail is bouncing
and he's not reachable. We hope all is well with him and say thanks
for his work over the years.
-----BEGIN PGP SIGNATURE-----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=/DKJ
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- Make multiqueue devices which use the managed interrupt affinity
infrastructure work on PowerPC/Pseries. PowerPC does not use the
generic infrastructure for setting up PCI/MSI interrupts and the
multiqueue changes failed to update the legacy PCI/MSI
infrastructure. Make this work by passing the affinity setup
information down to the mapping and allocation functions.
- Move Jason Cooper from MAINTAINERS to CREDITS as his mail is
bouncing and he's not reachable. We hope all is well with him and
say thanks for his work over the years"
* tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc/pseries: Pass MSI affinity to irq_create_mapping()
genirq/irqdomain: Add an irq_create_mapping_affinity() function
MAINTAINERS: Move Jason Cooper to CREDITS
There is no defconfig selecting CONFIG_E200, and no platform.
e200 is an earlier version of booke, a predecessor of e500,
with some particularities like an unified cache instead of both an
instruction cache and a data cache.
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/34ebc3ba2c768d97f363bd5f2deea2356e9ae127.1605589460.git.christophe.leroy@csgroup.eu
We execute certain NPU2 setup code (such as mapping an LPID to a device
in NPU2) unconditionally if an Nvlink bridge is detected. However this
cannot succeed on POWER8NVL machines and errors appear in dmesg. This is
harmless as skiboot returns an error and the only place we check it is
vfio-pci but that code does not get called on P8+ either.
This adds a check if pnv_npu2_xxx helpers are called on a machine with
NPU2 which initializes pnv_phb::npu in pnv_npu2_init();
pnv_phb::npu==NULL on POWER8/NVL (Naples).
While at this, fix NULL derefencing in pnv_npu_peers_take_ownership/
pnv_npu_peers_release_ownership which occurs when GPUs on mentioned P8s
cause EEH which happens if "vfio-pci" disables devices using
the D3 power state; the vfio-pci's disable_idle_d3 module parameter
controls this and must be set on Naples. The EEH handling clears
the entire pnv_ioda_pe struct in pnv_ioda_free_pe() hence
the NULL derefencing. We cannot recover from that but at least we stop
crashing.
Tested on
- POWER9 pvr=004e1201, Ubuntu 19.04 host, Ubuntu 18.04 vm,
NVIDIA GV100 10de:1db1 driver 418.39
- POWER8 pvr=004c0100, RHEL 7.6 host, Ubuntu 16.10 vm,
NVIDIA P100 10de:15f9 driver 396.47
Fixes: 1b785611e1 ("powerpc/powernv/npu: Add release_ownership hook")
Cc: stable@vger.kernel.org # 5.0
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201122073828.15446-1-aik@ozlabs.ru
If the platform decides to block enabling the device nothing is printed
currently. This can lead to some confusion since the dmesg output will
usually print an error with no context e.g.
e1000e: probe of 0022:01:00.0 failed with error -22
This shouldn't be spammy since pci_enable_device() already prints a
messages when it succeeds.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200409061337.9187-1-oohall@gmail.com
When a TLB Invalidate is required for the Logical Partition, the following
sequence has to be performed:
1. Load MMIO ATSD AVA register with the necessary value, if required.
2. Write the MMIO ATSD launch register to initiate the TLB Invalidate
command.
3. Poll the MMIO ATSD status register to determine when the TLB Invalidate
has been completed.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201125155013.39955-3-clombard@linux.vnet.ibm.com
Platform specific function to assign a register set to a Logical Partition.
The "ibm,mmio-atsd" property, provided by the firmware, contains the 16
base ATSD physical addresses (ATSD0 through ATSD15) of the set of MMIO
registers (XTS MMIO ATSDx LPARID/AVA/launch/status register).
For the time being, the ATSD0 set of registers is used by default.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201125155013.39955-2-clombard@linux.vnet.ibm.com
The config CONFIG_PPC_PKEY is used to select the base support that is
required for PPC_MEM_KEYS, KUAP, and KUEP. Adding this dependency
reduces the code complexity(in terms of #ifdefs) and enables us to
move some of the initialization code to pkeys.c
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-4-aneesh.kumar@linux.ibm.com
Don't treat ERAT MCEs as SLB, don't save the SLB and use a specific
ERAT flush to recover it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201128070728.825934-7-npiggin@gmail.com
Harmless HMI errors can be triggered by guests in some cases, and don't
contain much useful information anyway. Ratelimit these to avoid
flooding the console/logs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use dedicated ratelimit state, not printk_ratelimit()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201128070728.825934-6-npiggin@gmail.com
The driver core ignores the return value of struct device_driver::remove
because there is only little that can be done. For the shutdown callback
it's ps3_system_bus_shutdown() which ignores the return value.
To simplify the quest to make struct device_driver::remove return void,
let struct ps3_system_bus_driver::remove return void, too. All users
already unconditionally return 0, this commit makes it obvious that
returning an error code is a bad idea and ensures future users behave
accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126165950.2554997-2-u.kleine-koenig@pengutronix.de
We want to reuse the is_kvm_guest() name in a subsequent patch but
with a new body. Hence rename is_kvm_guest() to check_kvm_guest(). No
additional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: kernel test robot <lkp@intel.com> # int -> bool fix
[mpe: Fold in fix from lkp to use true/false not 0/1]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201202050456.164005-3-srikar@linux.vnet.ibm.com
Only code/declaration movement, in anticipation of doing a KVM-aware
vcpu_is_preempted(). No additional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201202050456.164005-2-srikar@linux.vnet.ibm.com
There is no point in copying floating point regs when there
is no FPU and MATH_EMULATION is not selected.
Create a new CONFIG_PPC_FPU_REGS bool that is selected by
CONFIG_MATH_EMULATION and CONFIG_PPC_FPU, and use it to
opt out everything related to fp_state in thread_struct.
The asm const used only by fpu.S are opted out with CONFIG_PPC_FPU
as fpu.S build is conditionnal to CONFIG_PPC_FPU.
The following app spends approx 8.1 seconds system time on an 8xx
without the patch, and 7.0 seconds with the patch (13.5% reduction).
On an 832x, it spends approx 2.6 seconds system time without
the patch and 2.1 seconds with the patch (19% reduction).
void sigusr1(int sig) { }
int main(int argc, char **argv)
{
int i = 100000;
signal(SIGUSR1, sigusr1);
for (;i--;)
raise(SIGUSR1);
exit(0);
}
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7569070083e6cd5b279bb5023da601aba3c06f3c.1597770847.git.christophe.leroy@csgroup.eu
This can be hit by an HPT guest running on an HPT host and bring down
the host, so it's quite important to fix.
Fixes: 7290f3b3d3 ("powerpc/64s/powernv: machine check dump SLB contents")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201128070728.825934-2-npiggin@gmail.com
With virtio multiqueue, normally each queue IRQ is mapped to a CPU.
Commit 0d9f0a52c8 ("virtio_scsi: use virtio IRQ affinity") exposed
an existing shortcoming of the arch code by moving virtio_scsi to
the automatic IRQ affinity assignment.
The affinity is correctly computed in msi_desc but this is not applied
to the system IRQs.
It appears the affinity is correctly passed to rtas_setup_msi_irqs() but
lost at this point and never passed to irq_domain_alloc_descs()
(see commit 06ee6d571f ("genirq: Add affinity hint to irq allocation"))
because irq_create_mapping() doesn't take an affinity parameter.
Use the new irq_create_mapping_affinity() function, which allows to forward
the affinity setting from rtas_setup_msi_irqs() to irq_domain_alloc_descs().
With this change, the virtqueues are correctly dispatched between the CPUs
on pseries.
Fixes: e75eafb9b0 ("genirq/msi: Switch to new irq spreading infrastructure")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201126082852.1178497-3-lvivier@redhat.com
So far we have been using huge DMA windows to map all the RAM available.
The RAM is normally mapped to the VM address space contiguously, and
there is always a reasonable upper limit for possible future hot plugged
RAM which makes it easy to map all RAM via IOMMU.
Now there is persistent memory ("ibm,pmemory" in the FDT) which (unlike
normal RAM) can map anywhere in the VM space beyond the maximum RAM size
and since it can be used for DMA, it requires extending the huge window
up to MAX_PHYSMEM_BITS which requires hypervisor support for:
1. huge TCE tables;
2. multilevel TCE tables;
3. huge IOMMU pages.
Certain hypervisors cannot do either so the only option left is
restricting the huge DMA window to include only RAM and fallback to
the default DMA window for persistent memory.
This defines arch_dma_map_direct/etc to allow generic DMA code perform
additional checks on whether direct DMA is still possible.
This checks if the system has persistent memory. If it does not,
the DMA bypass mode is selected, i.e.
* dev->bus_dma_limit = 0
* dev->dma_ops_bypass = true <- this avoid calling dma_ops for mapping.
If there is such memory, this creates identity mapping only for RAM and
sets the dev->bus_dma_limit to let the generic code decide whether to
call into the direct DMA or the indirect DMA ops.
This should not change the existing behaviour when no persistent memory
as dev->dma_ops_bypass is expected to be set.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When offlining a CPU, powerpc/64s does not flush TLBs, rather it just
leaves the CPU set in mm_cpumasks, so it continues to receive TLBIEs
to manage its TLBs.
However the exit_flush_lazy_tlbs() function expects that after
returning, all CPUs (except self) have flushed TLBs for that mm, in
which case TLBIEL can be used for this flush. This breaks for offline
CPUs because they don't get the IPI to flush their TLB. This can lead
to stale translations.
Fix this by clearing the CPU from mm_cpumasks, then flushing all TLBs
before going offline.
These offlined CPU bits stuck in the cpumask also prevents the cpumask
from being trimmed back to local mode, which means continual broadcast
IPIs or TLBIEs are needed for TLB flushing. This patch prevents that
situation too.
A cast of many were involved in working this out, but in particular
Milton, Aneesh, Paul made key discoveries.
Fixes: 0cef77c779 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Debugged-by: Milton Miller <miltonm@us.ibm.com>
Debugged-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Debugged-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126102530.691335-5-npiggin@gmail.com
pseries|pnv_setup_rfi_flush already does the count cache flush setup, and
we just added entry and uaccess flushes. So the name is not very accurate
any more. In both platforms we then also immediately setup the STF flush.
Rename them to _setup_security_mitigations and fold the STF flush in.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache after user accesses.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache on kernel entry.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Let's use alloc_contig_pages() for allocating memory and remove the
linear mapping manually via arch_remove_linear_mapping(). Mark all pages
PG_offline, such that they will definitely not get touched - e.g.,
when hibernating. When freeing memory, try to revert what we did.
The original idea was discussed in:
https://lkml.kernel.org/r/48340e96-7e6b-736f-9e23-d3111b915b6e@redhat.com
This is similar to CONFIG_DEBUG_PAGEALLOC handling on other
architectures, whereby only single pages are unmapped from the linear
mapping. Let's mimic what memory hot(un)plug would do with the linear
mapping.
We now need MEMORY_HOTPLUG and CONTIG_ALLOC as dependencies. Add a TODO
that we want to use __GFP_ZERO for clearing once alloc_contig_pages()
understands that.
Tested with in QEMU/TCG with 10 GiB of main memory:
[root@localhost ~]# echo 0x40000000 > /sys/kernel/debug/powerpc/memtrace/enable
[ 105.903043][ T1080] memtrace: Allocated trace memory on node 0 at 0x0000000080000000
[root@localhost ~]# echo 0x40000000 > /sys/kernel/debug/powerpc/memtrace/enable
[ 145.042493][ T1080] radix-mmu: Mapped 0x0000000080000000-0x00000000c0000000 with 64.0 KiB pages
[ 145.049019][ T1080] memtrace: Freed trace memory back on node 0
[ 145.333960][ T1080] memtrace: Allocated trace memory on node 0 at 0x0000000080000000
[root@localhost ~]# echo 0x80000000 > /sys/kernel/debug/powerpc/memtrace/enable
[ 213.606916][ T1080] radix-mmu: Mapped 0x0000000080000000-0x00000000c0000000 with 64.0 KiB pages
[ 213.613855][ T1080] memtrace: Freed trace memory back on node 0
[ 214.185094][ T1080] memtrace: Allocated trace memory on node 0 at 0x0000000080000000
[root@localhost ~]# echo 0x100000000 > /sys/kernel/debug/powerpc/memtrace/enable
[ 234.874872][ T1080] radix-mmu: Mapped 0x0000000080000000-0x0000000100000000 with 64.0 KiB pages
[ 234.886974][ T1080] memtrace: Freed trace memory back on node 0
[ 234.890153][ T1080] memtrace: Failed to allocate trace memory on node 0
[root@localhost ~]# echo 0x40000000 > /sys/kernel/debug/powerpc/memtrace/enable
[ 259.490196][ T1080] memtrace: Allocated trace memory on node 0 at 0x0000000080000000
I also made sure allocated memory is properly zeroed.
Note 1: We currently won't be allocating from ZONE_MOVABLE - because our
pages are not movable. However, as we don't run with any memory
hot(un)plug mechanism around, we could make an exception to
increase the chance of allocations succeeding.
Note 2: PG_reserved isn't sufficient. E.g., kernel_page_present() used
along PG_reserved in hibernation code will always return "true"
on powerpc, resulting in the pages getting touched. It's too
generic - e.g., indicates boot allocations.
Note 3: For now, we keep using memory_block_size_bytes() as minimum
granularity.
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-9-david@redhat.com
It's very easy to crash the kernel right now by simply trying to
enable memtrace concurrently, hammering on the "enable" interface
loop.sh:
#!/bin/bash
dmesg --console-off
while true; do
echo 0x40000000 > /sys/kernel/debug/powerpc/memtrace/enable
done
[root@localhost ~]# loop.sh &
[root@localhost ~]# loop.sh &
Resulting quickly in a kernel crash. Let's properly protect using a
mutex.
Fixes: 9d5171a8f2 ("powerpc/powernv: Enable removal of memory for in memory tracing")
Cc: stable@vger.kernel.org# v4.14+
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-3-david@redhat.com
This reverts commit a0ff72f9f5.
Since the commit b015f6bc95 ("powerpc/pseries: Add cpu DLPAR
support for drc-info property"), the 'cpu_drcs' wouldn't be double
freed when the 'cpus' node not found.
So we needn't apply this patch, otherwise, the memory will be leaked.
Fixes: a0ff72f9f5 ("powerpc/pseries/hotplug-cpu: Remove double free in error path")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[mpe: Caused by me applying a patch to a function that had changed in the interim]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111020752.1686139-1-zhangxiaoxu5@huawei.com
Currently the clang build of corenet64_smp_defconfig fails with:
arch/powerpc/platforms/85xx/corenet_generic.c:210:1: error:
attribute declaration must precede definition
machine_arch_initcall(corenet_generic, corenet_gen_publish_devices);
Fix it by moving the initcall definition prior to the machine
definition, and directly below the function it calls, which is the
usual style anyway.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201023020838.3274226-1-mpe@ellerman.id.au
A fix for undetected data corruption on Power9 Nimbus <= DD2.1 in the emulation
of VSX loads. The affected CPUs were not widely available.
Two fixes for machine check handling in guests under PowerVM.
A fix for our recent changes to SMP setup, when CONFIG_CPUMASK_OFFSTACK=y.
Three fixes for races in the handling of some of our powernv sysfs attributes.
One change to remove TM from the set of Power10 CPU features.
A couple of other minor fixes.
Thanks to:
Aneesh Kumar K.V, Christophe Leroy, Ganesh Goudar, Jordan Niethe, Mahesh
Salgaonkar, Michael Neuling, Oliver O'Halloran, Qian Cai, Srikar Dronamraju,
Vasant Hegde.
-----BEGIN PGP SIGNATURE-----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=LMZv
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for undetected data corruption on Power9 Nimbus <= DD2.1 in the
emulation of VSX loads. The affected CPUs were not widely available.
- Two fixes for machine check handling in guests under PowerVM.
- A fix for our recent changes to SMP setup, when
CONFIG_CPUMASK_OFFSTACK=y.
- Three fixes for races in the handling of some of our powernv sysfs
attributes.
- One change to remove TM from the set of Power10 CPU features.
- A couple of other minor fixes.
Thanks to: Aneesh Kumar K.V, Christophe Leroy, Ganesh Goudar, Jordan
Niethe, Mahesh Salgaonkar, Michael Neuling, Oliver O'Halloran, Qian Cai,
Srikar Dronamraju, Vasant Hegde.
* tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Avoid using addr_to_pfn in real mode
powerpc/uaccess: Don't use "m<>" constraint with GCC 4.9
powerpc/eeh: Fix eeh_dev_check_failure() for PE#0
powerpc/64s: Remove TM from Power10 features
selftests/powerpc: Make alignment handler test P9N DD2.1 vector CI load workaround
powerpc: Fix undetected data corruption with P9N DD2.1 VSX CI load emulation
powerpc/powernv/dump: Handle multiple writes to ack attribute
powerpc/powernv/dump: Fix race while processing OPAL dump
powerpc/smp: Use GFP_ATOMIC while allocating tmp mask
powerpc/smp: Remove unnecessary variable
powerpc/mce: Avoid nmi_enter/exit in real mode on pseries hash
powerpc/opal_elog: Handle multiple writes to ack attribute
When an UE or memory error exception is encountered the MCE handler
tries to find the pfn using addr_to_pfn() which takes effective
address as an argument, later pfn is used to poison the page where
memory error occurred, recent rework in this area made addr_to_pfn
to run in real mode, which can be fatal as it may try to access
memory outside RMO region.
Have two helper functions to separate things to be done in real mode
and virtual mode without changing any functionality. This also fixes
the following error as the use of addr_to_pfn is now moved to virtual
mode.
Without this change following kernel crash is seen on hitting UE.
[ 485.128036] Oops: Kernel access of bad area, sig: 11 [#1]
[ 485.128040] LE SMP NR_CPUS=2048 NUMA pSeries
[ 485.128047] Modules linked in:
[ 485.128067] CPU: 15 PID: 6536 Comm: insmod Kdump: loaded Tainted: G OE 5.7.0 #22
[ 485.128074] NIP: c00000000009b24c LR: c0000000000398d8 CTR: c000000000cd57c0
[ 485.128078] REGS: c000000003f1f970 TRAP: 0300 Tainted: G OE (5.7.0)
[ 485.128082] MSR: 8000000000001003 <SF,ME,RI,LE> CR: 28008284 XER: 00000001
[ 485.128088] CFAR: c00000000009b190 DAR: c0000001fab00000 DSISR: 40000000 IRQMASK: 1
[ 485.128088] GPR00: 0000000000000001 c000000003f1fbf0 c000000001634300 0000b0fa01000000
[ 485.128088] GPR04: d000000002220000 0000000000000000 00000000fab00000 0000000000000022
[ 485.128088] GPR08: c0000001fab00000 0000000000000000 c0000001fab00000 c000000003f1fc14
[ 485.128088] GPR12: 0000000000000008 c000000003ff5880 d000000002100008 0000000000000000
[ 485.128088] GPR16: 000000000000ff20 000000000000fff1 000000000000fff2 d0000000021a1100
[ 485.128088] GPR20: d000000002200000 c00000015c893c50 c000000000d49b28 c00000015c893c50
[ 485.128088] GPR24: d0000000021a0d08 c0000000014e5da8 d0000000021a0818 000000000000000a
[ 485.128088] GPR28: 0000000000000008 000000000000000a c0000000017e2970 000000000000000a
[ 485.128125] NIP [c00000000009b24c] __find_linux_pte+0x11c/0x310
[ 485.128130] LR [c0000000000398d8] addr_to_pfn+0x138/0x170
[ 485.128133] Call Trace:
[ 485.128135] Instruction dump:
[ 485.128138] 3929ffff 7d4a3378 7c883c36 7d2907b4 794a1564 7d294038 794af082 3900ffff
[ 485.128144] 79291f24 790af00e 78e70020 7d095214 <7c69502a> 2fa30000 419e011c 70690040
[ 485.128152] ---[ end trace d34b27e29ae0e340 ]---
Fixes: 9ca766f989 ("powerpc/64s/pseries: machine check convert to use common event code")
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724063946.21378-1-ganeshgr@linux.ibm.com
Even though we use self removing sysfs helper, we still need
to make sure we do the final kobject delete conditionally.
sysfs_remove_file_self() will handle parallel calls to remove
the sysfs attribute file and returns true only in the caller
that removed the attribute file. The other parallel callers
are returned false. Do the final kobject delete checking
the return value of sysfs_remove_file_self().
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201017164236.264713-1-hegdevasant@linux.vnet.ibm.com
