Commit Graph

19 Commits

Author SHA1 Message Date
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Sean Purcell 87bf54bb43 squashfs: Add zstd support
Add zstd compression and decompression support to SquashFS. zstd is a
great fit for SquashFS because it can compress at ratios approaching xz,
while decompressing twice as fast as zlib. For SquashFS in particular,
it can decompress as fast as lzo and lz4. It also has the flexibility
to turn down the compression ratio for faster compression times.

The compression benchmark is run on the file tree from the SquashFS archive
found in ubuntu-16.10-desktop-amd64.iso [1]. It uses `mksquashfs` with the
default block size (128 KB) and and various compression algorithms/levels.
xz and zstd are also benchmarked with 256 KB blocks. The decompression
benchmark times how long it takes to `tar` the file tree into `/dev/null`.
See the benchmark file in the upstream zstd source repository located under
`contrib/linux-kernel/squashfs-benchmark.sh` [2] for details.

I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD.

| Method         | Ratio | Compression MB/s | Decompression MB/s |
|----------------|-------|------------------|--------------------|
| gzip           |  2.92 |               15 |                128 |
| lzo            |  2.64 |              9.5 |                217 |
| lz4            |  2.12 |               94 |                218 |
| xz             |  3.43 |              5.5 |                 35 |
| xz 256 KB      |  3.53 |              5.4 |                 40 |
| zstd 1         |  2.71 |               96 |                210 |
| zstd 5         |  2.93 |               69 |                198 |
| zstd 10        |  3.01 |               41 |                225 |
| zstd 15        |  3.13 |             11.4 |                224 |
| zstd 16 256 KB |  3.24 |              8.1 |                210 |

This patch was written by Sean Purcell <me@seanp.xyz>, but I will be
taking over the submission process.

[1] http://releases.ubuntu.com/16.10/
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/squashfs-benchmark.sh

zstd source repository: https://github.com/facebook/zstd

Signed-off-by: Sean Purcell <me@seanp.xyz>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Acked-by: Phillip Lougher <phillip@squashfs.org.uk>
2017-09-08 19:33:25 -07:00
Phillip Lougher 62421645bb Squashfs: Add LZ4 compression configuration option
Add the glue code, and also update the documentation.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2014-11-27 18:48:44 +00:00
Phillip Lougher 0d455c12c6 Squashfs: Directly decompress into the page cache for file data
This introduces an implementation of squashfs_readpage_block()
that directly decompresses into the page cache.

This uses the previously added page handler abstraction to push
down the necessary kmap_atomic/kunmap_atomic operations on the
page cache buffers into the decompressors.  This enables
direct copying into the page cache without using the slow
kmap/kunmap calls.

The code detects when multiple threads are racing in
squashfs_readpage() to decompress the same block, and avoids
this regression by falling back to using an intermediate
buffer.

This patch enhances the performance of Squashfs significantly
when multiple processes are accessing the filesystem simultaneously
because it not only reduces memcopying, but it more importantly
eliminates the lock contention on the intermediate buffer.

Using single-thread decompression.

        dd if=file1 of=/dev/null bs=4096 &
        dd if=file2 of=/dev/null bs=4096 &
        dd if=file3 of=/dev/null bs=4096 &
        dd if=file4 of=/dev/null bs=4096

Before:

629145600 bytes (629 MB) copied, 45.8046 s, 13.7 MB/s

After:

629145600 bytes (629 MB) copied, 9.29414 s, 67.7 MB/s

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Minchan Kim <minchan@kernel.org>
2013-11-20 03:59:13 +00:00
Phillip Lougher 5f55dbc0c5 Squashfs: Restructure squashfs_readpage()
Restructure squashfs_readpage() splitting it into separate
functions for datablocks, fragments and sparse blocks.

Move the memcpying (from squashfs cache entry) implementation of
squashfs_readpage_block into file_cache.c

This allows different implementations to be supported.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Minchan Kim <minchan@kernel.org>
2013-11-20 03:59:07 +00:00
Phillip Lougher d208383d64 Squashfs: add multi-threaded decompression using percpu variable
Add a multi-threaded decompression implementation which uses
percpu variables.

Using percpu variables has advantages and disadvantages over
implementations which do not use percpu variables.

Advantages:
  * the nature of percpu variables ensures decompression is
    load-balanced across the multiple cores.
  * simplicity.

Disadvantages: it limits decompression to one thread per core.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2013-11-20 03:58:03 +00:00
Minchan Kim cd59c2ec5f squashfs: Enhance parallel I/O
Now squashfs have used for only one stream buffer for decompression
so it hurts parallel read performance so this patch supports
multiple decompressor to enhance performance parallel I/O.

Four 1G file dd read on KVM machine which has 2 CPU and 4G memory.

dd if=test/test1.dat of=/dev/null &
dd if=test/test2.dat of=/dev/null &
dd if=test/test3.dat of=/dev/null &
dd if=test/test4.dat of=/dev/null &

old : 1m39s -> new : 9s

* From v1
  * Change comp_strm with decomp_strm - Phillip
  * Change/add comments - Phillip

Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2013-11-20 03:35:18 +00:00
Phillip Lougher 9508c6b90b Squashfs: Refactor decompressor interface and code
The decompressor interface and code was written from
the point of view of single-threaded operation.  In doing
so it mixed a lot of single-threaded implementation specific
aspects into the decompressor code and elsewhere which makes it
difficult to seamlessly support multiple different decompressor
implementations.

This patch does the following:

1.  It removes compressor_options parsing from the decompressor
    init() function.  This allows the decompressor init() function
    to be dynamically called to instantiate multiple decompressors,
    without the compressor options needing to be read and parsed each
    time.

2.  It moves threading and all sleeping operations out of the
    decompressors.  In doing so, it makes the decompressors
    non-blocking wrappers which only deal with interfacing with
    the decompressor implementation.

3. It splits decompressor.[ch] into decompressor generic functions
   in decompressor.[ch], and moves the single threaded
   decompressor implementation into decompressor_single.c.

The result of this patch is Squashfs should now be able to
support multiple decompressors by adding new decompressor_xxx.c
files with specialised implementations of the functions in
decompressor_single.c

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Minchan Kim <minchan@kernel.org>
2013-11-20 03:35:18 +00:00
Phillip Lougher cc6d349714 Squashfs: Make ZLIB compression support optional
Squashfs now supports XZ and LZO compression in addition to ZLIB.
As such it no longer makes sense to always include ZLIB support.
In particular embedded systems may only use LZO or XZ compression, and
the ability to exclude ZLIB support will reduce kernel size.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2011-07-22 03:01:28 +01:00
Phillip Lougher 7a43ae5237 Squashfs: Add XZ compression configuration option
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-01-13 21:16:52 +00:00
Chan Jeong 79cb8ced7e Squashfs: Add LZO compression support
Signed-off-by: Chan Jeong <chan.jeong@lge.com>
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-08-05 02:29:59 +01:00
Phillip Lougher 637d5c9a36 Squashfs: Make XATTR config name consistent with other file systems
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-05-31 18:46:29 +01:00
Phillip Lougher 01e5b4e4e8 squashfs: add xattr support configure option
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-05-17 19:54:07 +01:00
Phillip Lougher f41d207cbe squashfs: add support for xattr reading
Add support for listxattr and getxattr.  Also add xattr definitions.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-05-17 19:54:06 +01:00
Phillip Lougher 4b5397dc24 squashfs: add xattr id support
This patch adds support for mapping xattr ids (stored in inodes)
into the on-disk location of the xattrs themselves.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-05-17 19:54:05 +01:00
Phillip Lougher 4c0f0bb235 Squashfs: add a decompressor framework
This adds a decompressor framework which allows multiple compression
algorithms to be cleanly supported.

Also update zlib wrapper and other code to use the new framework.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-01-20 21:47:47 +00:00
Phillip Lougher e6a6d37955 Squashfs: move zlib decompression wrapper code into a separate file
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-01-20 21:47:46 +00:00
Phillip Lougher e5d287539d Squashfs: cody tidying, remove commented out line in Makefile
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2009-05-13 03:25:20 +01:00
Phillip Lougher fcef6fb6c5 Squashfs: Makefiles
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2009-01-05 08:46:27 +00:00