Test case 71 'Convert perf time to TSC' is not supported on s390.
Subtest 71.1 is skipped with the correct message, but subtest 71.2 is
not skipped and fails.
The root cause is function evlist__open() called from
test__perf_time_to_tsc(). evlist__open() returns -ENOENT because the
event cycles:u is not supported by the selected PMU, for example
platform s390 on z/VM or an x86_64 virtual machine.
The PMU driver returns -ENOENT in this case. This error is leads to the
failure.
Fix this by returning TEST_SKIP on -ENOENT.
Output before:
71: Convert perf time to TSC:
71.1: TSC support: Skip (This architecture does not support)
71.2: Perf time to TSC: FAILED!
Output after:
71: Convert perf time to TSC:
71.1: TSC support: Skip (This architecture does not support)
71.2: Perf time to TSC: Skip (perf_read_tsc_conversion is not supported)
This also happens on an x86_64 virtual machine:
# uname -m
x86_64
$ ./perf test -F 71
71: Convert perf time to TSC :
71.1: TSC support : Ok
71.2: Perf time to TSC : FAILED!
$
Committer testing:
Continues to work on x86_64:
$ perf test 71
71: Convert perf time to TSC :
71.1: TSC support : Ok
71.2: Perf time to TSC : Ok
$
Fixes: 290fa68bdc ("perf test tsc: Fix error message when not supported")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chengdong Li <chengdongli@tencent.com>
Cc: chengdongli@tencent.com
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220420062921.1211825-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit Fixes: b9f6fbb3b2 ("perf arm64: Inject missing frames when
using 'perf record --call-graph=fp'") intended to add a 'best effort'
DWARF unwind that improved the frame pointer stack in most scenarios.
It's expected that the unwind will fail sometimes, but this shouldn't be
reported as an error. It only works when the return address can be
determined from the contents of the link register alone.
Fix the error shown when the unwinder requires extra registers by adding
a new flag that suppresses error messages. This flag is not set in the
normal --call-graph=dwarf unwind mode so that behavior is not changed.
Fixes: b9f6fbb3b2 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220406145651.1392529-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By default `perf test tsc` does not return the error message when the
child process detected kernel does not support it. Instead, the child
process prints an error message to stderr, unfortunately stderr is
redirected to /dev/null when verbose <= 0.
This patch does:
- return TEST_SKIP to the parent process instead of TEST_OK when
perf_read_tsc_conversion() is not supported.
- Add a new subtest of testing if TSC is supported on current
architecture by moving exist code to a separate function.
It avoids two places in test__perf_time_to_tsc() that return
TEST_SKIP by doing this.
- Extend the test suite definition to contain above two subtests.
Current test_suite and test_case structs do not support printing skip
reason when the number of subtest less than 1. To print skip reason, it
is necessary to extend current test suite definition.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chengdong Li <chengdongli@tencent.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: likexu@tencent.com
Link: https://lore.kernel.org/r/20220408084748.43707-1-chengdongli@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features:
perf ftrace:
- Add -n/--use-nsec option to the 'latency' subcommand.
Default: usecs:
$ sudo perf ftrace latency -T dput -a sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 2098375 | ############################# |
1 - 2 us | 61 | |
2 - 4 us | 33 | |
4 - 8 us | 13 | |
8 - 16 us | 124 | |
16 - 32 us | 123 | |
32 - 64 us | 1 | |
64 - 128 us | 0 | |
128 - 256 us | 1 | |
256 - 512 us | 0 | |
Better granularity with nsec:
$ sudo perf ftrace latency -T dput -a -n sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 0 | |
1 - 2 ns | 0 | |
2 - 4 ns | 0 | |
4 - 8 ns | 0 | |
8 - 16 ns | 0 | |
16 - 32 ns | 0 | |
32 - 64 ns | 0 | |
64 - 128 ns | 1163434 | ############## |
128 - 256 ns | 914102 | ############# |
256 - 512 ns | 884 | |
512 - 1024 ns | 613 | |
1 - 2 us | 31 | |
2 - 4 us | 17 | |
4 - 8 us | 7 | |
8 - 16 us | 123 | |
16 - 32 us | 83 | |
perf lock:
- Add -c/--combine-locks option to merge lock instances in the same class into
a single entry.
# perf lock report -c
Name acquired contended avg wait(ns) total wait(ns) max wait(ns) min wait(ns)
rcu_read_lock 251225 0 0 0 0 0
hrtimer_bases.lock 39450 0 0 0 0 0
&sb->s_type->i_l... 10301 1 662 662 662 662
ptlock_ptr(page) 10173 2 701 1402 760 642
&(ei->i_block_re... 8732 0 0 0 0 0
&xa->xa_lock 8088 0 0 0 0 0
&base->lock 6705 0 0 0 0 0
&p->pi_lock 5549 0 0 0 0 0
&dentry->d_lockr... 5010 4 1274 5097 1844 789
&ep->lock 3958 0 0 0 0 0
- Add -F/--field option to customize the list of fields to output:
$ perf lock report -F contended,wait_max -k avg_wait
Name contended max wait(ns) avg wait(ns)
slock-AF_INET6 1 23543 23543
&lruvec->lru_lock 5 18317 11254
slock-AF_INET6 1 10379 10379
rcu_node_1 1 2104 2104
&dentry->d_lockr... 1 1844 1844
&dentry->d_lockr... 1 1672 1672
&newf->file_lock 15 2279 1025
&dentry->d_lockr... 1 792 792
- Add --synth=no option for record, as there is no need to symbolize,
lock names comes from the tracepoints.
perf record:
- Threaded recording, opt-in, via the new --threads command line option.
- Improve AMD IBS (Instruction-Based Sampling) error handling messages.
perf script:
- Add 'brstackinsnlen' field (use it with -F) for branch stacks.
- Output branch sample type in 'perf script'.
perf report:
- Add "addr_from" and "addr_to" sort dimensions.
- Print branch stack entry type in 'perf report --dump-raw-trace'
- Fix symbolization for chrooted workloads.
Hardware tracing:
Intel PT:
- Add CFE (Control Flow Event) and EVD (Event Data) packets support.
- Add MODE.Exec IFLAG bit support.
Explanation about these features from the "Intel® 64 and IA-32 architectures
software developer’s manual combined volumes: 1, 2A, 2B, 2C, 2D, 3A, 3B, 3C,
3D, and 4" PDF at:
https://cdrdv2.intel.com/v1/dl/getContent/671200
At page 3951:
<quote>
32.2.4
Event Trace is a capability that exposes details about the asynchronous
events, when they are generated, and when their corresponding software
event handler completes execution. These include:
o Interrupts, including NMI and SMI, including the interrupt vector when
defined.
o Faults, exceptions including the fault vector.
— Page faults additionally include the page fault address, when in context.
o Event handler returns, including IRET and RSM.
o VM exits and VM entries.¹
— VM exits include the values written to the “exit reason” and “exit qualification” VMCS fields.
INIT and SIPI events.
o TSX aborts, including the abort status returned for the RTM instructions.
o Shutdown.
Additionally, it provides indication of the status of the Interrupt Flag
(IF), to indicate when interrupts are masked.
</quote>
ARM CoreSight:
- Use advertised caps/min_interval as default sample_period on ARM spe.
- Update deduction of TRCCONFIGR register for branch broadcast on ARM's CoreSight ETM.
Vendor Events (JSON):
Intel:
- Update events and metrics for:
Alderlake, Broadwell, Broadwell DE, BroadwellX, CascadelakeX, Elkhartlake,
Bonnell, Goldmont, GoldmontPlus, Westmere EP-DP, Haswell, HaswellX,
Icelake, IcelakeX, Ivybridge, Ivytown, Jaketown, Knights Landing,
Nehalem EP, Sandybridge, Silvermont, Skylake, Skylake Server, SkylakeX,
Tigerlake, TremontX, Westmere EP-SP, Westmere EX.
ARM:
- Add support for HiSilicon CPA PMU aliasing.
perf stat:
- Fix forked applications enablement of counters.
- The 'slots' should only be printed on a different order than the one specified
on the command line when 'topdown' events are present, fix it.
Miscellaneous:
- Sync msr-index, cpufeatures header files with the kernel sources.
- Stop using some deprecated libbpf APIs in 'perf trace'.
- Fix some spelling mistakes.
- Refactor the maps pointers usage to pave the way for using refcount debugging.
- Only offer the --tui option on perf top, report and annotate when perf was
built with libslang.
- Don't mention --to-ctf in 'perf data --help' when not linking with the required
library, libbabeltrace.
- Use ARRAY_SIZE() instead of ad hoc equivalent, spotted by array_size.cocci.
- Enhance the matching of sub-commands abbreviations:
'perf c2c rec' -> 'perf c2c record'
'perf c2c recport -> error
- Set build-id using build-id header on new mmap records.
- Fix generation of 'perf --version' string.
perf test:
- Add test for the arm_spe event.
- Add test to check unwinding using fame-pointer (fp) mode on arm64.
- Make metric testing more robust in 'perf test'.
- Add error message for unsupported branch stack cases.
libperf:
- Add API for allocating new thread map array.
- Fix typo in perf_evlist__open() failure error messages in libperf tests.
perf c2c:
- Replace bitmap_weight() with bitmap_empty() where appropriate.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYj8viwAKCRCyPKLppCJ+
J8K3AQDpN45P4/TWJxVWhZlvYzJtWDSboXHZJfmBiEd4Xu2zbwD7BFW02f1ATHPr
dGBFXxRQQufBIqfE+OQXG59Awp1m8wE=
=1l8S
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.18-2022-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
"New features:
perf ftrace:
- Add -n/--use-nsec option to the 'latency' subcommand.
Default: usecs:
$ sudo perf ftrace latency -T dput -a sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 2098375 | ############################# |
1 - 2 us | 61 | |
2 - 4 us | 33 | |
4 - 8 us | 13 | |
8 - 16 us | 124 | |
16 - 32 us | 123 | |
32 - 64 us | 1 | |
64 - 128 us | 0 | |
128 - 256 us | 1 | |
256 - 512 us | 0 | |
Better granularity with nsec:
$ sudo perf ftrace latency -T dput -a -n sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 0 | |
1 - 2 ns | 0 | |
2 - 4 ns | 0 | |
4 - 8 ns | 0 | |
8 - 16 ns | 0 | |
16 - 32 ns | 0 | |
32 - 64 ns | 0 | |
64 - 128 ns | 1163434 | ############## |
128 - 256 ns | 914102 | ############# |
256 - 512 ns | 884 | |
512 - 1024 ns | 613 | |
1 - 2 us | 31 | |
2 - 4 us | 17 | |
4 - 8 us | 7 | |
8 - 16 us | 123 | |
16 - 32 us | 83 | |
perf lock:
- Add -c/--combine-locks option to merge lock instances in the same
class into a single entry.
# perf lock report -c
Name acquired contended avg wait(ns) total wait(ns) max wait(ns) min wait(ns)
rcu_read_lock 251225 0 0 0 0 0
hrtimer_bases.lock 39450 0 0 0 0 0
&sb->s_type->i_l... 10301 1 662 662 662 662
ptlock_ptr(page) 10173 2 701 1402 760 642
&(ei->i_block_re... 8732 0 0 0 0 0
&xa->xa_lock 8088 0 0 0 0 0
&base->lock 6705 0 0 0 0 0
&p->pi_lock 5549 0 0 0 0 0
&dentry->d_lockr... 5010 4 1274 5097 1844 789
&ep->lock 3958 0 0 0 0 0
- Add -F/--field option to customize the list of fields to output:
$ perf lock report -F contended,wait_max -k avg_wait
Name contended max wait(ns) avg wait(ns)
slock-AF_INET6 1 23543 23543
&lruvec->lru_lock 5 18317 11254
slock-AF_INET6 1 10379 10379
rcu_node_1 1 2104 2104
&dentry->d_lockr... 1 1844 1844
&dentry->d_lockr... 1 1672 1672
&newf->file_lock 15 2279 1025
&dentry->d_lockr... 1 792 792
- Add --synth=no option for record, as there is no need to symbolize,
lock names comes from the tracepoints.
perf record:
- Threaded recording, opt-in, via the new --threads command line
option.
- Improve AMD IBS (Instruction-Based Sampling) error handling
messages.
perf script:
- Add 'brstackinsnlen' field (use it with -F) for branch stacks.
- Output branch sample type in 'perf script'.
perf report:
- Add "addr_from" and "addr_to" sort dimensions.
- Print branch stack entry type in 'perf report --dump-raw-trace'
- Fix symbolization for chrooted workloads.
Hardware tracing:
Intel PT:
- Add CFE (Control Flow Event) and EVD (Event Data) packets support.
- Add MODE.Exec IFLAG bit support.
Explanation about these features from the "Intel® 64 and IA-32
architectures software developer’s manual combined volumes: 1, 2A,
2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:
https://cdrdv2.intel.com/v1/dl/getContent/671200
At page 3951:
"32.2.4
Event Trace is a capability that exposes details about the
asynchronous events, when they are generated, and when their
corresponding software event handler completes execution. These
include:
o Interrupts, including NMI and SMI, including the interrupt
vector when defined.
o Faults, exceptions including the fault vector.
- Page faults additionally include the page fault address,
when in context.
o Event handler returns, including IRET and RSM.
o VM exits and VM entries.¹
- VM exits include the values written to the “exit reason”
and “exit qualification” VMCS fields. INIT and SIPI events.
o TSX aborts, including the abort status returned for the RTM
instructions.
o Shutdown.
Additionally, it provides indication of the status of the
Interrupt Flag (IF), to indicate when interrupts are masked"
ARM CoreSight:
- Use advertised caps/min_interval as default sample_period on ARM
spe.
- Update deduction of TRCCONFIGR register for branch broadcast on
ARM's CoreSight ETM.
Vendor Events (JSON):
Intel:
- Update events and metrics for: Alderlake, Broadwell, Broadwell DE,
BroadwellX, CascadelakeX, Elkhartlake, Bonnell, Goldmont,
GoldmontPlus, Westmere EP-DP, Haswell, HaswellX, Icelake, IcelakeX,
Ivybridge, Ivytown, Jaketown, Knights Landing, Nehalem EP,
Sandybridge, Silvermont, Skylake, Skylake Server, SkylakeX,
Tigerlake, TremontX, Westmere EP-SP, and Westmere EX.
ARM:
- Add support for HiSilicon CPA PMU aliasing.
perf stat:
- Fix forked applications enablement of counters.
- The 'slots' should only be printed on a different order than the
one specified on the command line when 'topdown' events are
present, fix it.
Miscellaneous:
- Sync msr-index, cpufeatures header files with the kernel sources.
- Stop using some deprecated libbpf APIs in 'perf trace'.
- Fix some spelling mistakes.
- Refactor the maps pointers usage to pave the way for using refcount
debugging.
- Only offer the --tui option on perf top, report and annotate when
perf was built with libslang.
- Don't mention --to-ctf in 'perf data --help' when not linking with
the required library, libbabeltrace.
- Use ARRAY_SIZE() instead of ad hoc equivalent, spotted by
array_size.cocci.
- Enhance the matching of sub-commands abbreviations:
'perf c2c rec' -> 'perf c2c record'
'perf c2c recport -> error
- Set build-id using build-id header on new mmap records.
- Fix generation of 'perf --version' string.
perf test:
- Add test for the arm_spe event.
- Add test to check unwinding using fame-pointer (fp) mode on arm64.
- Make metric testing more robust in 'perf test'.
- Add error message for unsupported branch stack cases.
libperf:
- Add API for allocating new thread map array.
- Fix typo in perf_evlist__open() failure error messages in libperf
tests.
perf c2c:
- Replace bitmap_weight() with bitmap_empty() where appropriate"
* tag 'perf-tools-for-v5.18-2022-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (143 commits)
perf evsel: Improve AMD IBS (Instruction-Based Sampling) error handling messages
perf python: Add perf_env stubs that will be needed in evsel__open_strerror()
perf tools: Enhance the matching of sub-commands abbreviations
libperf tests: Fix typo in perf_evlist__open() failure error messages
tools arm64: Import cputype.h
perf lock: Add -F/--field option to control output
perf lock: Extend struct lock_key to have print function
perf lock: Add --synth=no option for record
tools headers cpufeatures: Sync with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
perf stat: Fix forked applications enablement of counters
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf evsel: Make evsel__env() always return a valid env
perf build-id: Fix spelling mistake "Cant" -> "Can't"
perf header: Fix spelling mistake "could't" -> "couldn't"
perf script: Add 'brstackinsnlen' for branch stacks
perf parse-events: Move slots only with topdown
perf ftrace latency: Update documentation
perf ftrace latency: Add -n/--use-nsec option
perf tools: Fix version kernel tag
...
Add a shell script to check that the call-graphs generated using frame
pointers (--call-graph fp) are complete and not missing leaf functions:
| $ perf test 88 -v
| 88: Check Arm64 callgraphs are complete in fp mode :
| --- start ---
| test child forked, pid 8734
| + Compiling test program (/tmp/test_program.Cz3yL)...
| + Recording (PID=8749)...
| + Stopping perf-record...
| test_program.Cz
| 728 leaf
| 753 parent
| 76c main
| test child finished with 0
| ---- end ----
| Check Arm SPE callgraphs are complete in fp mode: Ok
It's supposed to work with both unwinders:
| $ make # for libunwind (default)
| $ make NO_LIBUNWIND=1 # for libdw
Tester notes:
Ran it on N1SDP and it passes, and it fails if b9f6fbb3b2 ("perf
arm64: Inject missing frames when using 'perf record --call-graph=fp'")
isn't applied.
Fixes: b9f6fbb3b2 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'")
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220316172015.98000-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adds a couple of perf_event_attr tests for the fix introduced in [1].
The tests check that the correct sample_period value is set in the
struct perf_event_attr of the arm_spe events.
[1]: https://lore.kernel.org/all/20220118144054.2541-1-german.gomez@arm.com/
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220126160710.32983-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Skip the Sigtrap test for arm + arm64, same as was done for s390 in
commit a840974e96 ("perf test: Test 73 Sig_trap fails on s390"). For
this, reuse BP_SIGNAL_IS_SUPPORTED - meaning that the arch can use BP to
generate signals - instead of BP_ACCOUNT_IS_SUPPORTED, which is
appropriate.
As described by Will at [0], in the test we get stuck in a loop of
handling the HW breakpoint exception and never making progress. GDB
handles this by stepping over the faulting instruction, but with perf
the kernel is expected to handle the step (which it doesn't for arm).
Dmitry made an attempt to get this work, also mentioned in the same
thread as [0], which was appreciated. But the best thing to do is skip
the test for now.
[0] https://lore.kernel.org/linux-perf-users/20220118124343.GC98966@leoy-ThinkPad-X240s/T/#m13b06c39d2a5100d340f009435df6f4d8ee57b5a
Fixes: 5504f67944 ("perf test sigtrap: Add basic stress test for sigtrap handling")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@armlinux.org.uk
Link: https://lore.kernel.org/r/1645176813-202756-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct perf_event_attr is initialised differently in Arm64 when
recording in call-graph fp mode, so update the relevant tests, and add
two extra arm64-only tests.
Before:
$ perf test 17 -v
17: Setup struct perf_event_attr
[...]
running './tests/attr/test-record-graph-default'
expected sample_type=295, got 4391
expected sample_regs_user=0, got 1073741824
FAILED './tests/attr/test-record-graph-default' - match failure
test child finished with -1
---- end ----
After:
[...]
running './tests/attr/test-record-graph-default-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-fp-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-default'
running './tests/attr/test-record-graph-fp'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-fp'
[...]
Fixes: 7248e308a5 ("perf tools: Record ARM64 LR register automatically")
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220125104435.2737-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When testing metric expressions we fake counter values from 1 going
upward. For some metrics this can yield negative values that are clipped
to zero, and then cause divide by zero failures.
Such clipping is questionable but may be a result of tools automatically
generating metrics. A workaround for this case is to try a second time
with counter values going in the opposite direction.
This case was seen in a metric like:
event1 / max(event2 - event3, 0)
But it may also happen in more sensible metrics like:
event1 / (event2 + event3 - 1 - event4)
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211223185622.3435128-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some Intel TMA metrics compute a ratio that may divide by 0, which
causes the metric not to print. This happens for metrics with FP_ARITH
events. If we see these events in the result and would otherwise fail,
then switch to a skip.
Also, don't early exit when processing metrics.
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220201015858.1226914-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct maps is reference counted, using a pointer is more idiomatic.
Committer notes:
Check maps__new() return.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct maps is reference counted, using a pointer is more idiomatic.
Committer notes:
Delay:
maps = machine__kernel_maps(&vmlinux);
To after:
machine__init(&vmlinux, "", HOST_KERNEL_ID);
To avoid this on f34:
In file included from /var/home/acme/git/perf/tools/perf/util/build-id.h:10,
from /var/home/acme/git/perf/tools/perf/util/dso.h:13,
from tests/vmlinux-kallsyms.c:8:
In function ‘machine__kernel_maps’,
inlined from ‘test__vmlinux_matches_kallsyms’ at tests/vmlinux-kallsyms.c:122:22:
/var/home/acme/git/perf/tools/perf/util/machine.h:86:23: error: ‘vmlinux.kmaps’ is used uninitialized [-Werror=uninitialized]
86 | return machine->kmaps;
| ~~~~~~~^~~~~~~
tests/vmlinux-kallsyms.c: In function ‘test__vmlinux_matches_kallsyms’:
tests/vmlinux-kallsyms.c:121:34: note: ‘vmlinux’ declared here
121 | struct machine kallsyms, vmlinux;
| ^~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_load_program() API is deprecated, remove perf's usage of the
deprecated function. Add a __weak function declaration for libbpf
version compatibility.
Signed-off-by: Christy Lee <christylee@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: bpf@vger.kernel.org
Cc: kernel-team@fb.com
Link: https://lore.kernel.org/bpf/20220212073054.1052880-2-andrii@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-02-09
We've added 126 non-merge commits during the last 16 day(s) which contain
a total of 201 files changed, 4049 insertions(+), 2215 deletions(-).
The main changes are:
1) Add custom BPF allocator for JITs that pack multiple programs into a huge
page to reduce iTLB pressure, from Song Liu.
2) Add __user tagging support in vmlinux BTF and utilize it from BPF
verifier when generating loads, from Yonghong Song.
3) Add per-socket fast path check guarding from cgroup/BPF overhead when
used by only some sockets, from Pavel Begunkov.
4) Continued libbpf deprecation work of APIs/features and removal of their
usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko
and various others.
5) Improve BPF instruction set documentation by adding byte swap
instructions and cleaning up load/store section, from Christoph Hellwig.
6) Switch BPF preload infra to light skeleton and remove libbpf dependency
from it, from Alexei Starovoitov.
7) Fix architecture-agnostic macros in libbpf for accessing syscall
arguments from BPF progs for non-x86 architectures,
from Ilya Leoshkevich.
8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be
of 16-bit field with anonymous zero padding, from Jakub Sitnicki.
9) Add new bpf_copy_from_user_task() helper to read memory from a different
task than current. Add ability to create sleepable BPF iterator progs,
from Kenny Yu.
10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and
utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski.
11) Generate temporary netns names for BPF selftests to avoid naming
collisions, from Hangbin Liu.
12) Implement bpf_core_types_are_compat() with limited recursion for
in-kernel usage, from Matteo Croce.
13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5
to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor.
14) Misc minor fixes to libbpf and selftests from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits)
selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup
bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide
libbpf: Fix compilation warning due to mismatched printf format
selftests/bpf: Test BPF_KPROBE_SYSCALL macro
libbpf: Add BPF_KPROBE_SYSCALL macro
libbpf: Fix accessing the first syscall argument on s390
libbpf: Fix accessing the first syscall argument on arm64
libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL
selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390
libbpf: Fix accessing syscall arguments on riscv
libbpf: Fix riscv register names
libbpf: Fix accessing syscall arguments on powerpc
selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro
libbpf: Add PT_REGS_SYSCALL_REGS macro
selftests/bpf: Fix an endianness issue in bpf_syscall_macro test
bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE
bpf: Fix leftover header->pages in sparc and powerpc code.
libbpf: Fix signedness bug in btf_dump_array_data()
selftests/bpf: Do not export subtest as standalone test
bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures
...
====================
Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bpf_object__open_buffer() API is deprecated, use the unified opts
bpf_object__open_mem() API in perf instead. This requires at least
libbpf 0.0.6.
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220125005923.418339-3-christylee@fb.com
Add a test which allows us to test parsing an event alias with hyphens.
Since these events typically do not exist on most host systems, add the
alias to the fake pmu.
Function perf_pmu__test_parse_init() has terms added to match known test
aliases.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for aliases with hyphens in the name to ensure that the
pmu-events tables are as expects. There should be no reason why these sort
of aliases would be treated differently, but no harm in checking.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up fixes and get in line with other trees, powerpc kernel
mostly this time, but BPF as well.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A common problem is confusing CPU map indices with the CPU, by wrapping
the CPU with a struct then this is avoided. This approach is similar to
atomic_t.
Committer notes:
To make it build with BUILD_BPF_SKEL=1 these files needed the
conversions to 'struct perf_cpu' usage:
tools/perf/util/bpf_counter.c
tools/perf/util/bpf_counter_cgroup.c
tools/perf/util/bpf_ftrace.c
Also perf_env__get_cpu() was removed back in "perf cpumap: Switch
cpu_map__build_map to cpu function".
Additionally these needed to be fixed for the ARM builds to complete:
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/pmu.c
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Clean up variable naming to make cpu and index clearer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-41-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing the number of CPUs and threads allows for an evsel's counts to
be mismatched to its cpu map. To avoid this always derive the counts
size from the cpu map. Change openat-syscall-all-cpus to set the cpus
to allow for this to work.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-27-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With no aggregration, such as 'perf stat -A', the aggr_cpu_id lacks a
way to describe per CPU aggregation and the core is set to the CPU in
places like print_counter_aggrdata in stat-display.c.
Setting the core to the CPU is undesirable as the CPU will exceed valid
core values and lead to confusion. Add a CPU variable to address this.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-25-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the cpu map argument const for consistency with the rest of the
API. Modify cpu_map__idx accordingly.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-21-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The functions don't use a cpu_map so reduce them to being like
constructors of aggr_cpu_id.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-20-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uncore events as group leaders fail in per-thread mode causing exit
errors. Enable system-wide for metricgroup testing. This fixes the HPC
metric group when tested on skylakex.
Fixes: 4a87dea9e6 ("perf test: Workload test of metric and metricgroups")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211223183948.3423989-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is in preparation for adding more tests that will need the test
number to be 3 digts so they align nicely in the output.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20211215160403.69264-3-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In Linux next commit 5504f67944 ("perf test sigtrap: Add basic
stress test for sigtrap handling") introduced the new test which uses
breakpoint events. These events are not supported on s390 and PowerPC
and always fail:
# perf test -F 73
73: Sigtrap : FAILED!
#
Fix it the same way as in the breakpoint tests in file
tests/bp_account.c where these type of tests are skipped on s390 and
PowerPC platforms.
With this patch skip this test on both platforms.
Output after:
# perf test -F 73
73: Sigtrap
#
Fixes: 5504f67944 ("perf test sigtrap: Add basic stress test for sigtrap handling")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20211216151454.752066-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The output of 'perf bench' gets buffered when I pipe it to a file or to
tee, in such a way that I can see it only at the end.
E.g.
$ perf bench internals synthesize -t
< output comes out fine after each test run >
$ perf bench internals synthesize -t | tee file.txt
< output comes out only at the end of all tests >
This patch resolves this issue for 'bench' and 'test' subcommands.
See, also:
$ perf bench mem all | tee file.txt
$ perf bench sched all | tee file.txt
$ perf bench internals all -t | tee file.txt
$ perf bench internals all | tee file.txt
Committer testing:
It really gets staggered, i.e. outputs in bursts, when the buffer fills
up and has to be drained to make up space for more output.
Suggested-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211119061409.78004-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Helps a bit the user figuring out why it is failing:
Before:
$ perf test sigtrap
73: Sigtrap : FAILED!
$ perf test -v sigtrap
73: Sigtrap :
--- start ---
test child forked, pid 3816772
FAILED sys_perf_event_open()
test child finished with -1
---- end ----
Sigtrap: FAILED!
$
After:
$ perf test sigtrap
73: Sigtrap : FAILED!
$ perf test -v sigtrap
73: Sigtrap :
--- start ---
test child forked, pid 3816772
FAILED sys_perf_event_open(): Permission denied
test child finished with -1
---- end ----
Sigtrap: FAILED!
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kasan-dev@googlegroups.com
Link: http://lore.kernel.org/lkml/YZOpSVOCXe0zWeRs@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic stress test for sigtrap handling as a perf tool built-in test.
This allows sanity checking the basic sigtrap functionality from within
the perf tool.
Committer notes:
Reported that !root was getting -EPERM, applied a fixup from Marco to
set .exclude_{hv,kernel} that made it work.
Signed-off-by: Marco Elver <elver@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kasan-dev@googlegroups.com
Link: http://lore.kernel.org/lkml/20211115112822.4077224-1-elver@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Otherwise load counting is an average. Without this change
duration_time in test_memory_bandwidth will alter its value if an
earlier test contains duration_time.
This patch fixes an issue that's introduced in the proposed patch:
https://lore.kernel.org/lkml/20211124015226.3317994-1-irogers@google.com/
in perf test "Parse and process metrics".
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211128085810.4027314-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some platforms do not have CPU die support, for example s390.
Commit
Cc: Ian Rogers <irogers@google.com>
Fixes: fdf1e29b61 ("perf expr: Add metric literals for topology.")
fails on s390:
# perf test -Fv 7
...
# FAILED tests/expr.c:173 #num_dies >= #num_packages
---- end ----
Simple expression parser: FAILED!
#
Investigating this issue leads to these functions:
build_cpu_topology()
+--> has_die_topology(void)
{
struct utsname uts;
if (uname(&uts) < 0)
return false;
if (strncmp(uts.machine, "x86_64", 6))
return false;
....
}
which always returns false on s390. The caller build_cpu_topology()
checks has_die_topology() return value. On false the the struct
cpu_topology::die_cpu_list is not contructed and has zero entries. This
leads to the failing comparison: #num_dies >= #num_packages. s390 of
course has a positive number of packages.
Fix this and check if the function build_cpu_topology() did build up
a die_cpus_list. The number of entries in this list should be larger
than 0. If the number of list element is zero, the die_cpus_list has
not been created and the check in function test__expr():
TEST_ASSERT_VAL("#num_dies >= #num_packages", \
num_dies >= num_packages)
always fails.
Output after:
# perf test -Fv 7
7: Simple expression parser :
--- start ---
division by zero
syntax error
---- end ----
Simple expression parser: Ok
#
Fixes: fdf1e29b61 ("perf expr: Add metric literals for topology.")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20211129112339.3003036-1-tmricht@linux.ibm.com
[ Added comment in the added 'if (num_dies)' line about architectures not having die topology ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Libbpf development version was bumped to 0.7 in c93faaaf2f
("libbpf: Deprecate bpf_prog_load_xattr() API"), activating a bunch of
previously scheduled deprecations. Most APIs are pretty straightforward
to replace with newer APIs, but perf has a complicated mixed setup with
libbpf used both as static and shared configurations, which makes it
non-trivial to migrate the APIs.
Further, bpf_program__set_prep() needs more involved refactoring, which
will require help from Arnaldo and/or Jiri.
So for now, mute deprecation warnings and work on migrating perf off of
deprecated APIs separately with the input from owners of the perf tool.
Fixes: c93faaaf2f ("libbpf: Deprecate bpf_prog_load_xattr() API")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211203004640.2455717-1-andrii@kernel.org
unit may have a strdup pointer or be to a literal, consequently memory
assocciated with it isn't freed. Change it so the unit is always strdup
and so the memory can be safely freed.
Fix related issue in perf_event__process_event_update() for name and
own_cpus. Leaks were spotted by leak sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118084749.2191447-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 10269a2ca2 ("perf test sample-parsing: Add endian test for
struct branch_flags") broke the test case 27 (Sample parsing) on s390 on
linux-next tree:
# perf test -Fv 27
27: Sample parsing
--- start ---
parsing failed for sample_type 0x800
---- end ----
Sample parsing: FAILED!
#
The cause of the failure is a wrong #define BS_EXPECTED_BE statement in
above commit. Correct this define and the test case runs fine.
Output After:
# perf test -Fv 27
27: Sample parsing :
--- start ---
---- end ----
Sample parsing: Ok
#
Fixes: 10269a2ca2 ("perf test sample-parsing: Add endian test for struct branch_flags")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
CC: Sven Schnelle <svens@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/54077e81-503e-3405-6cb0-6541eb5532cc@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing these build problems:
tests/wp.c:24:12: error: 'wp_read' defined but not used [-Werror=unused-function]
static int wp_read(int fd, long long *count, int size)
^
tests/wp.c:35:13: error: 'get__perf_event_attr' defined but not used [-Werror=unused-function]
static void get__perf_event_attr(struct perf_event_attr *attr, int wp_type,
^
CC /tmp/build/perf/util/print_binary.o
Fixes: e47c6ecaae ("perf test: Convert watch point tests to test cases.")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tests were passing but without testing and were printing the
following:
$ ./perf test -v 90
90: perf all PMU test :
--- start ---
test child forked, pid 51650
Testing cpu/branch-instructions/
./tests/shell/stat_all_pmu.sh: 10: [:
Performance counter stats for 'true':
137,307 cpu/branch-instructions/
0.001686672 seconds time elapsed
0.001376000 seconds user
0.000000000 seconds sys: unexpected operator
Changing the regexes to a grep works in sh and prints this:
$ ./perf test -v 90
90: perf all PMU test :
--- start ---
test child forked, pid 60186
[...]
Testing tlb_flush.stlb_any
test child finished with 0
---- end ----
perf all PMU test: Ok
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 463538a383 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:
$ ./perf test -v 85
85: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 50643
Collecting compressed record file:
./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found
Fixes: 463538a383 ("perf tests: Fix test 68 zstd compression for s390")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the test skips with an error because == only works in bash:
$ ./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 44586
./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Changing == to = does the same thing, but doesn't result in an error:
./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 45833
Skipping: --bpf-counters not supported
Error: unknown option `bpf-counters'
[...]
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
