Access to time requires to touch two cachelines at minimum
1) The timekeeper data structure
2) The clocksource data structure
The access to the clocksource data structure can be avoided as almost
all clocksource implementations ignore the argument to the read
callback, which is a pointer to the clocksource.
But the core needs to touch it to access the members @read and @mask.
So we are better off by copying the @read function pointer and the
@mask from the clocksource to the core data structure itself.
For the most used ktime_get() access all required data including the
@read and @mask copies fits together with the sequence counter into a
single 64 byte cacheline.
For the other time access functions we touch in the current code three
cache lines in the worst case. But with the clocksource data copies we
can reduce that to two adjacent cachelines, which is more efficient
than disjunct cache lines.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
cycle_last was added to the clocksource to support the TSC
validation. We moved that to the core code, so we can get rid of the
extra copy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The only user of the cycle_last validation is the x86 TSC. In order to
provide NMI safe accessor functions for clock monotonic and
monotonic_raw we need to do that in the core.
We can't do the TSC specific
if (now < cycle_last)
now = cycle_last;
for the other wrapping around clocksources, but TSC has
CLOCKSOURCE_MASK(64) which actually does not mask out anything so if
now is less than cycle_last the subtraction will give a negative
result. So we can check for that in clocksource_delta() and return 0
for that case.
Implement and enable it for x86
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
We want to move the TSC sanity check into core code to make NMI safe
accessors to clock monotonic[_raw] possible. For this we need to
sanity check the delta calculation. Create a helper function and
convert all sites to use it.
[ Build fix from jstultz ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Provide a ktime_t based interface for raw monotonic time.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
timekeeping_clocktai() is not used in fast pathes, so the extra
timespec conversion is not problematic.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Subtracting plain nsec values and converting to timespec is simpler
than the whole timespec math. Not really fastpath code, so the
division is not an issue.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
get_monotonic_boottime() is not used in fast pathes, so the extra
timespec conversion is not problematic.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Having two fields within the same struct that is off by one character
can be confusing and error prone. Rename the counter "trampolines"
to "nr_trampolines" to explicitly show it is a counter and not to
be confused by the "trampoline" field.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Converting cputime to timespec and timespec to nanoseconds makes no
sense. Use cputime_to_ns() and be done with it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Kill the timespec juggling and calculate with plain nanoseconds.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Simplify the timespec to nsec/usec conversions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Simplify the only user of this data by removing the timespec
conversion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Required for moving drivers to the nanosecond based interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
ktime based conversion function to map a monotonic time stamp to a
different CLOCK.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Provide a helper function which lets us implement ktime_t based
interfaces for real, boot and tai clocks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Speed up ktime_get() by using ktime_t based data. Text size shrinks by
64 bytes on x8664.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The ktime_t based interfaces are used a lot in performance critical
code pathes. Add ktime_t based data so the interfaces don't have to
convert from the xtime/timespec based data.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
We already have a function which does the right thing, that also makes
sure that the coming ktime_t based cached values are getting updated.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
struct timekeeper is quite badly sorted for the hot readout path. Most
time access functions need to load two cache lines.
Rearrange it so ktime_get() and getnstimeofday() are happy with a
single cache line.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
To convert callers of the core code to timespec64 we need to provide
the proper interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Right now we have time related prototypes in 3 different header
files. Move it to a single timekeeping header file and move the core
internal stuff into a core private header.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Convert the core timekeeping logic to use timespec64s. This moves the
2038 issues out of the core logic and into all of the accessor
functions.
Future changes will need to push the timespec64s out to all
timekeeping users, but that can be done interface by interface.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Helper and conversion functions for timespec64.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
With the plain nanoseconds based ktime_t we can simply use
ktime_divns() instead of going through loops and hoops of
timespec/timeval conversion.
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The non-scalar ktime_t implementation is basically a timespec
which has to be changed to support dates past 2038 on 32bit
systems.
This patch removes the non-scalar ktime_t implementation, forcing
the scalar s64 nanosecond version on all architectures.
This may have additional performance overhead on some 32bit
systems when converting between ktime_t and timespec structures,
however the majority of 32bit systems (arm and i386) were already
using scalar ktime_t, so no performance regressions will be seen
on those platforms.
On affected platforms, I'm open to finding optimizations, including
avoiding converting to timespecs where possible.
[ tglx: We can now cleanup the ktime_t.tv64 mess, but thats a
different issue and we can throw a coccinelle script at it ]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Rather then having two similar but totally different implementations
that provide timekeeping state to the hrtimer code, try to unify the
two implementations to be more simliar.
Thus this clarifies ktime_get_update_offsets to
ktime_get_update_offsets_now and changes get_xtime... to
ktime_get_update_offsets_tick.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Provide a default stub function instead of having the extra
conditional. Cuts binary size on a m68k build by ~100 bytes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Create a module that allows udelay() to be executed to ensure that
it is delaying at least as long as requested (with a little bit of
error allowed).
There are some configurations which don't have reliably udelay
due to using a loop delay with cpufreq changes which should use
a counter time based delay instead. This test aims to identify
those configurations where timing is unreliable.
Signed-off-by: David Riley <davidriley@chromium.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The PM workqueue is going to be used by ACPI PM notify handlers
regardless of whether or not runtime PM is configured, so move
it out of #ifdef CONFIG_PM_RUNTIME.
Do that in three places in the ACPI device PM code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After the introduction of freeze_ops it makes more sense to move
all of the platform suspend operations to separate functions that
each will do all of the necessary checks and choose the right
callback to execute istead of doing all that in the core code
which makes it generally harder to follow.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the OPP layer is a kernel library which has been converted to be
directly selectable by its callers rather than user selectable and
requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol
has become redundant and can be removed. Do so.
Signed-off-by: Mark Brown <broonie@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
They are the same and nr_node_ids is provided by the memory subsystem.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
After the locking was moved up to the caller of the get_unbound_pool(),
out_unlock label doesn't need to do any unlock operation and the name
became bad, so we just remove this label, and the only usage-site
"goto out_unlock" is subsituted to "return pool".
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In 75ccf5950f ("workqueue: prepare flush_workqueue() for dynamic
creation and destrucion of unbound pool_workqueues"), a comment
about the synchronization for the pwq in pwq_unbound_release_workfn()
was added. The comment claimed the flush_mutex wasn't strictly
necessary, it was correct in that time, due to the pwq was protected
by workqueue_lock.
But it is incorrect now since the wq->flush_mutex was renamed to
wq->mutex and workqueue_lock was removed, the wq->mutex is strictly
needed. But the comment was miss-updated when the synchronization
was changed.
This patch removes the incorrect comments and doesn't add any new
comment to explain why wq->mutex is needed here, which is definitely
obvious and wq->pwqs_node has "WQ" notation in its definition which is
better comment.
The old commit mentioned above also introduced a comment in link_pwq()
about the synchronization. This comment is also removed in this patch
since the whole link_pwq() is proteced by wq->mutex.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In 51697d3939 ("workqueue: use generic attach/detach routine for
rescuers"), The rescuer detaches itself from the pool before put_pwq()
so that the put_unbound_pool() will not destroy the rescuer-attached
pool.
It is unnecessary. worker_detach_from_pool() can be used as the last
statement to access to the pool just like the regular workers,
put_unbound_pool() will wait for it to detach and then free the pool.
So we move the worker_detach_from_pool() down, make it coincide with
the regular workers.
tj: Minor description update.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Simply unfold the code of start_worker() into create_worker() and
remove the original start_worker() and create_and_start_worker().
The only trade-off is the introduced overhead that the pool->lock
is released and regrabbed after the newly worker is started.
The overhead is acceptible since the manager is slow path.
And because this new locking behavior, the newly created worker
may grab the lock earlier than the manager and go to process
work items. In this case, the recheck need_to_create_worker() may be
true as expected and the manager goes to restart which is the
correct behavior.
tj: Minor updates to description and comments.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_set_flags() has only two callers, each specifying %true and
%false for @wakeup. Let's push the wake up to the caller and remove
@wakeup from worker_set_flags(). The caller can use the following
instead if wakeup is necessary:
worker_set_flags();
if (need_more_worker(pool))
wake_up_worker(pool);
This makes the code simpler. This patch doesn't introduce behavior
changes.
tj: Updated description and comments.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In process_one_work():
if ((worker->flags & WORKER_UNBOUND) && need_more_worker(pool))
wake_up_worker(pool);
the first test is unneeded. Even if the first test is removed, it
doesn't affect the wake-up logic for WORKER_UNBOUND, and it will not
introduce any useless wake-ups for normal per-cpu workers since
nr_running is always >= 1. It will introduce useless/redundant
wake-ups for CPU_INTENSIVE, but this case is rare and the next patch
will also remove this redundant wake-up.
tj: Minor updates to the description and comment.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Conflicts:
drivers/infiniband/hw/cxgb4/device.c
The cxgb4 conflict was simply overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
The "uptime" trace clock added in:
commit 8aacf017b0
tracing: Add "uptime" trace clock that uses jiffies
has wraparound problems when the system has been up more
than 1 hour 11 minutes and 34 seconds. It converts jiffies
to nanoseconds using:
(u64)jiffies_to_usecs(jiffy) * 1000ULL
but since jiffies_to_usecs() only returns a 32-bit value, it
truncates at 2^32 microseconds. An additional problem on 32-bit
systems is that the argument is "unsigned long", so fixing the
return value only helps until 2^32 jiffies (49.7 days on a HZ=1000
system).
Avoid these problems by using jiffies_64 as our basis, and
not converting to nanoseconds (we do convert to clock_t because
user facing API must not be dependent on internal kernel
HZ values).
Link: http://lkml.kernel.org/p/99d63c5bfe9b320a3b428d773825a37095bf6a51.1405708254.git.tony.luck@intel.com
Cc: stable@vger.kernel.org # 3.10+
Fixes: 8aacf017b0 "tracing: Add "uptime" trace clock that uses jiffies"
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Simplify the sleep states sysfs interface /sys/power/state code by
redefining pm_states[] as an array of pointers to constant strings
such that only the entries corresponding to valid states are set.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull locking fixes from Thomas Gleixner:
"The locking department delivers:
- A rather large and intrusive bundle of fixes to address serious
performance regressions introduced by the new rwsem / mcs
technology. Simpler solutions have been discussed, but they would
have been ugly bandaids with more risk than doing the right thing.
- Make the rwsem spin on owner technology opt-in for architectures
and enable it only on the known to work ones.
- A few fixes to the lockdep userspace library"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add CONFIG_RWSEM_SPIN_ON_OWNER
locking/mutex: Disable optimistic spinning on some architectures
locking/rwsem: Reduce the size of struct rw_semaphore
locking/rwsem: Rename 'activity' to 'count'
locking/spinlocks/mcs: Micro-optimize osq_unlock()
locking/spinlocks/mcs: Introduce and use init macro and function for osq locks
locking/spinlocks/mcs: Convert osq lock to atomic_t to reduce overhead
locking/spinlocks/mcs: Rename optimistic_spin_queue() to optimistic_spin_node()
locking/rwsem: Allow conservative optimistic spinning when readers have lock
tools/liblockdep: Account for bitfield changes in lockdeps lock_acquire
tools/liblockdep: Remove debug print left over from development
tools/liblockdep: Fix comparison of a boolean value with a value of 2
Pull scheduler fix from Thomas Gleixner:
"Prevent a possible divide by zero in the debugging code"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix possible divide by zero in avg_atom() calculation
Pull timer fix from Thomas Gleixner:
"A single fix for a long standing issue in the alarm timer subsystem,
which was noticed recently when people finally started to use alarm
timers for serious work"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Fix bug where relative alarm timers were treated as absolute
Pull RCU fixes from Thomas Gleixner:
"Two RCU patches:
- Address a serious performance regression on open/close caused by
commit ac1bea8578 ("Make cond_resched() report RCU quiescent
states")
- Export RCU debug functions. Not a regression, but enablement to
address a serious recursion bug in the sl*b allocators in 3.17"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Reduce overhead of cond_resched() checks for RCU
rcu: Export debug_init_rcu_head() and and debug_init_rcu_head()
- Fix for a recently introduced NULL pointer dereference in the core
system suspend code occuring when platforms without ACPI attempt to
use the "freeze" sleep state from Zhang Rui.
- Fix for a recently introduced build warning in cpufreq headers from
Brian W Hart.
- Fix for a 3.13 cpufreq regression related to sysem resume that
triggers on some systems with multiple CPU clusters from Viresh Kumar.
- Fix for a 3.4 regression in request_firmware() resulting in
WARN_ON()s on some systems during system resume from Takashi Iwai.
- Revert of the ACPI video commit that changed the default value of
the video.brightness_switch_enabled command line argument to 0 as
it has been reported to break existing setups.
- ACPI device enumeration documentation update to take recent code
changes into account and make the documentation match the code again
from Darren Hart.
- Fixes for the sa1110, imx6q, kirkwood, and cpu0 cpufreq drivers
from Linus Walleij, Nicolas Del Piano, Quentin Armitage, Viresh Kumar.
- New ACPI video blacklist entry for HP ProBook 4540s from Hans de Goede.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=kuyY
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These are a few recent regression fixes, a revert of the ACPI video
commit I promised, a system resume fix related to request_firmware(),
an ACPI video quirk for one more Win8-oriented BIOS, an ACPI device
enumeration documentation update and a few fixes for ARM cpufreq
drivers.
Specifics:
- Fix for a recently introduced NULL pointer dereference in the core
system suspend code occuring when platforms without ACPI attempt to
use the "freeze" sleep state from Zhang Rui.
- Fix for a recently introduced build warning in cpufreq headers from
Brian W Hart.
- Fix for a 3.13 cpufreq regression related to sysem resume that
triggers on some systems with multiple CPU clusters from Viresh
Kumar.
- Fix for a 3.4 regression in request_firmware() resulting in
WARN_ON()s on some systems during system resume from Takashi Iwai.
- Revert of the ACPI video commit that changed the default value of
the video.brightness_switch_enabled command line argument to 0 as
it has been reported to break existing setups.
- ACPI device enumeration documentation update to take recent code
changes into account and make the documentation match the code
again from Darren Hart.
- Fixes for the sa1110, imx6q, kirkwood, and cpu0 cpufreq drivers
from Linus Walleij, Nicolas Del Piano, Quentin Armitage, Viresh
Kumar.
- New ACPI video blacklist entry for HP ProBook 4540s from Hans de
Goede"
* tag 'pm+acpi-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: make table sentinel macros unsigned to match use
cpufreq: move policy kobj to policy->cpu at resume
cpufreq: cpu0: OPPs can be populated at runtime
cpufreq: kirkwood: Reinstate cpufreq driver for ARCH_KIRKWOOD
cpufreq: imx6q: Select PM_OPP
cpufreq: sa1110: set memory type for h3600
ACPI / video: Add use_native_backlight quirk for HP ProBook 4540s
PM / sleep: fix freeze_ops NULL pointer dereferences
PM / sleep: Fix request_firmware() error at resume
Revert "ACPI / video: change acpi-video brightness_switch_enabled default to 0"
ACPI / documentation: Remove reference to acpi_platform_device_ids from enumeration.txt
We don't need to wake up regular worker when nr_running==1,
so need_more_worker() is sufficient here.
And need_more_worker() gives us better readability due to the name of
"keep_working()" implies the rescuer should keep working now but
the rescuer is actually leaving.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Do not waste time copying the old hash if the hash is going to be
reset. Just allocate a new hash and free the old one, as that is
the same result as copying te old one and then resetting it.
Link: http://lkml.kernel.org/p/1405384820-48837-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[ SDR: Removed unused ftrace_filter_reset() function ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, tracing_thresh works only if we specify it before selecting
function_graph tracer. If we do the opposite, tracing_thresh will change
it's value, but it will not be applied.
To fix it, we add update_thresh callback which is called whenever
tracing_thresh is updated and for function_graph tracer we register
handler which reinitializes tracer depending on tracing_thresh.
Link: http://lkml.kernel.org/p/20140718111727.GA3206@stfomichev-desktop.yandex.net
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Applying restrictive seccomp filter programs to large or diverse
codebases often requires handling threads which may be started early in
the process lifetime (e.g., by code that is linked in). While it is
possible to apply permissive programs prior to process start up, it is
difficult to further restrict the kernel ABI to those threads after that
point.
This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for
synchronizing thread group seccomp filters at filter installation time.
When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC,
filter) an attempt will be made to synchronize all threads in current's
threadgroup to its new seccomp filter program. This is possible iff all
threads are using a filter that is an ancestor to the filter current is
attempting to synchronize to. NULL filters (where the task is running as
SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be
transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS,
...) has been set on the calling thread, no_new_privs will be set for
all synchronized threads too. On success, 0 is returned. On failure,
the pid of one of the failing threads will be returned and no filters
will have been applied.
The race conditions against another thread are:
- requesting TSYNC (already handled by sighand lock)
- performing a clone (already handled by sighand lock)
- changing its filter (already handled by sighand lock)
- calling exec (handled by cred_guard_mutex)
The clone case is assisted by the fact that new threads will have their
seccomp state duplicated from their parent before appearing on the tasklist.
Holding cred_guard_mutex means that seccomp filters cannot be assigned
while in the middle of another thread's exec (potentially bypassing
no_new_privs or similar). The call to de_thread() may kill threads waiting
for the mutex.
Changes across threads to the filter pointer includes a barrier.
Based on patches by Will Drewry.
Suggested-by: Julien Tinnes <jln@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
This changes the mode setting helper to allow threads to change the
seccomp mode from another thread. We must maintain barriers to keep
TIF_SECCOMP synchronized with the rest of the seccomp state.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Normally, task_struct.seccomp.filter is only ever read or modified by
the task that owns it (current). This property aids in fast access
during system call filtering as read access is lockless.
Updating the pointer from another task, however, opens up race
conditions. To allow cross-thread filter pointer updates, writes to the
seccomp fields are now protected by the sighand spinlock (which is shared
by all threads in the thread group). Read access remains lockless because
pointer updates themselves are atomic. However, writes (or cloning)
often entail additional checking (like maximum instruction counts)
which require locking to perform safely.
In the case of cloning threads, the child is invisible to the system
until it enters the task list. To make sure a child can't be cloned from
a thread and left in a prior state, seccomp duplication is additionally
moved under the sighand lock. Then parent and child are certain have
the same seccomp state when they exit the lock.
Based on patches by Will Drewry and David Drysdale.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
In preparation for adding seccomp locking, move filter creation away
from where it is checked and applied. This will allow for locking where
no memory allocation is happening. The validation, filter attachment,
and seccomp mode setting can all happen under the future locks.
For extreme defensiveness, I've added a BUG_ON check for the calculated
size of the buffer allocation in case BPF_MAXINSN ever changes, which
shouldn't ever happen. The compiler should actually optimize out this
check since the test above it makes it impossible.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Since seccomp transitions between threads requires updates to the
no_new_privs flag to be atomic, the flag must be part of an atomic flag
set. This moves the nnp flag into a separate task field, and introduces
accessors.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
This adds the new "seccomp" syscall with both an "operation" and "flags"
parameter for future expansion. The third argument is a pointer value,
used with the SECCOMP_SET_MODE_FILTER operation. Currently, flags must
be 0. This is functionally equivalent to prctl(PR_SET_SECCOMP, ...).
In addition to the TSYNC flag later in this patch series, there is a
non-zero chance that this syscall could be used for configuring a fixed
argument area for seccomp-tracer-aware processes to pass syscall arguments
in the future. Hence, the use of "seccomp" not simply "seccomp_add_filter"
for this syscall. Additionally, this syscall uses operation, flags,
and user pointer for arguments because strictly passing arguments via
a user pointer would mean seccomp itself would be unable to trivially
filter the seccomp syscall itself.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Separates the two mode setting paths to make things more readable with
fewer #ifdefs within function bodies.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
To support splitting mode 1 from mode 2, extract the mode checking and
assignment logic into common functions.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
In preparation for having other callers of the seccomp mode setting
logic, split the prctl entry point away from the core logic that performs
seccomp mode setting.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
The code for resizing the trace ring buffers has to run the per-cpu
resize on the CPU itself. The code was using preempt_off() and
running the code for the current CPU directly, otherwise calling
schedule_work_on().
At least on RT this could result in the following:
|BUG: sleeping function called from invalid context at kernel/rtmutex.c:673
|in_atomic(): 1, irqs_disabled(): 0, pid: 607, name: bash
|3 locks held by bash/607:
|CPU: 0 PID: 607 Comm: bash Not tainted 3.12.15-rt25+ #124
|(rt_spin_lock+0x28/0x68)
|(free_hot_cold_page+0x84/0x3b8)
|(free_buffer_page+0x14/0x20)
|(rb_update_pages+0x280/0x338)
|(ring_buffer_resize+0x32c/0x3dc)
|(free_snapshot+0x18/0x38)
|(tracing_set_tracer+0x27c/0x2ac)
probably via
|cd /sys/kernel/debug/tracing/
|echo 1 > events/enable ; sleep 2
|echo 1024 > buffer_size_kb
If we just always use schedule_work_on(), there's no need for the
preempt_off(). So do that.
Link: http://lkml.kernel.org/p/1405537633-31518-1-git-send-email-cminyard@mvista.com
Reported-by: Stanislav Meduna <stano@meduna.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All users of function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST have
been removed. We can safely remove them from the kernel.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
function_trace_stop is no longer used to stop function tracing.
Remove the check from __ftrace_ops_list_func().
Also, call FTRACE_WARN_ON() instead of setting function_trace_stop
if a ops has no func to call.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When function tracing is being updated function_trace_stop is set to
keep from tracing the updates. This was fine when function tracing
was done from stop machine. But it is no longer done that way and
this can cause real tracing to be missed.
Remove it.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All archs now use ftrace_graph_is_dead() to stop function graph
tracing. Remove the usage of ftrace_stop() as that is no longer
needed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On ia64 and ppc64, function pointers do not point to the
entry address of the function, but to the address of a
function descriptor (which contains the entry address and misc
data).
Since the kprobes code passes the function pointer stored
by NOKPROBE_SYMBOL() to kallsyms_lookup_size_offset() for
initalizing its blacklist, it fails and reports many errors,
such as:
Failed to find blacklist 0001013168300000
Failed to find blacklist 0001013000f0a000
[...]
To fix this bug, use arch_deref_entry_point() to get the
function entry address for kallsyms_lookup_size_offset()
instead of the raw function pointer.
Suzuki also pointed out that blacklist entries should also
be updated as well.
Reported-by: Tony Luck <tony.luck@gmail.com>
Fixed-by: Suzuki K. Poulose <suzuki@in.ibm.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (for powerpc)
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: sparse@chrisli.org
Cc: Paul Mackerras <paulus@samba.org>
Cc: akataria@vmware.com
Cc: anil.s.keshavamurthy@intel.com
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: rdunlap@infradead.org
Cc: dl9pf@gmx.de
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-ia64@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20140717114411.13401.2632.stgit@kbuild-fedora.novalocal
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some driver might want to pass in an 64-bit value, so introduce
a module param type 'ullong'.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
I was cleaning out my INBOX and found two fixes from zhangwei from
a year ago that were lost in my mail. These fix an inconsistency between
trace_puts() and the way trace_printk() works. The reason this is
important to fix is because when trace_printk() doesn't have any
arguments, it turns into a trace_puts(). Not being able to enable a
stack trace against trace_printk() because it does not have any arguments
is quite confusing. Also, the fix is rather trivial and low risk.
While porting some changes to PowerPC I discovered that it still has
the function graph tracer filter bug that if you also enable stack tracing
the function graph tracer filter is ignored. I fixed that up.
Finally, Martin Lau, fixed a bug that would cause readers of the
ftrace ring buffer to block forever even though it was suppose to be
NONBLOCK.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTxfAHAAoJEKQekfcNnQGueDkH/jQ/FgNPw+GbKuNpZwWqMQds
ivGM8yb6NgmlDQx60oBOL9TduKN2LCqW3HWDoyzduSozuLUxpRTPWtVThKo0Q9Fp
FPHWewdrX7DwWkyEqeG7FAAhjqPedgEZoDOwy7BArzJYpHcpex42trDY4BhjPrlM
ESA+/M+Xm1vGCJzcNSqNHYE/mF/tHptdM1mlLZ3g9ql49MiTbQxEMbHX7lih24sv
AzNP1SlisYN5CkX4hbRGhCYkZdmdVZt/xiyBAQRWCGFx+jsdJbMXDJnevDCdU9Mv
GNtKwqsi1/GeE5nvKxZyQKsDEE98Pd8LyQ0kDqKpAfTutqNE4mpWJkCxUqTmE4Q=
=aFqO
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.16-rc5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few more fixes for ftrace infrastructure.
I was cleaning out my INBOX and found two fixes from zhangwei from a
year ago that were lost in my mail. These fix an inconsistency
between trace_puts() and the way trace_printk() works. The reason
this is important to fix is because when trace_printk() doesn't have
any arguments, it turns into a trace_puts(). Not being able to enable
a stack trace against trace_printk() because it does not have any
arguments is quite confusing. Also, the fix is rather trivial and low
risk.
While porting some changes to PowerPC I discovered that it still has
the function graph tracer filter bug that if you also enable stack
tracing the function graph tracer filter is ignored. I fixed that up.
Finally, Martin Lau, fixed a bug that would cause readers of the
ftrace ring buffer to block forever even though it was suppose to be
NONBLOCK"
This also includes the fix from an earlier pull request:
"Oleg Nesterov fixed a memory leak that happens if a user creates a
tracing instance, sets up a filter in an event, and then removes that
instance. The filter allocates memory that is never freed when the
instance is destroyed"
* tag 'trace-fixes-v3.16-rc5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Fix polling on trace_pipe
tracing: Add TRACE_ITER_PRINTK flag check in __trace_puts/__trace_bputs
tracing: Fix graph tracer with stack tracer on other archs
tracing: Add ftrace_trace_stack into __trace_puts/__trace_bputs
tracing: instance_rmdir() leaks ftrace_event_file->filter
ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.
Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing.
A new function is created called ftrace_graph_is_dead(). This is called
in strategic paths to prevent function graph from doing more harm and
allowing at least a warning to be printed before the system crashes.
NOTE: ftrace_stop() is still used until all the archs are converted over
to use ftrace_graph_is_dead(). After that, ftrace_stop() will be removed.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_stop() and ftrace_start() were added to the suspend and hibernate
process because there was some function within the work flow that caused
the system to reboot if it was traced. This function has recently been
found (restore_processor_state()). Now there's no reason to disable
function tracing while we are going into suspend or hibernate, which means
that being able to trace this will help tremendously in debugging any
issues with suspend or hibernate.
This also means that the ftrace_stop/start() functions can be removed
and simplify the function tracing code a bit.
Link: http://lkml.kernel.org/r/1518201.VD9cU33jRU@vostro.rjw.lan
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of allowing public keys, with certificates signed by any
key on the system trusted keyring, to be added to a trusted keyring,
this patch further restricts the certificates to those signed only by
builtin keys on the system keyring.
This patch defines a new option 'builtin' for the kernel parameter
'keys_ownerid' to allow trust validation using builtin keys.
Simplified Mimi's "KEYS: define an owner trusted keyring" patch
Changelog v7:
- rename builtin_keys to use_builtin_keys
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Export the generic irq map function in order to provide irq_domain ops with
generic mapping and specific of xlate function (needed by the new atmel
AIC driver).
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1405012462-766-2-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The arch_mutex_cpu_relax() function, introduced by 34b133f, is
hacky and ugly. It was added a few years ago to address the fact
that common cpu_relax() calls include yielding on s390, and thus
impact the optimistic spinning functionality of mutexes. Nowadays
we use this function well beyond mutexes: rwsem, qrwlock, mcs and
lockref. Since the macro that defines the call is in the mutex header,
any users must include mutex.h and the naming is misleading as well.
This patch (i) renames the call to cpu_relax_lowlatency ("relax, but
only if you can do it with very low latency") and (ii) defines it in
each arch's asm/processor.h local header, just like for regular cpu_relax
functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax,
and thus we can take it out of mutex.h. While this can seem redundant,
I believe it is a good choice as it allows us to move out arch specific
logic from generic locking primitives and enables future(?) archs to
transparently define it, similarly to System Z.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharat Bhushan <r65777@freescale.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Stratos Karafotis <stratosk@semaphore.gr>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: adi-buildroot-devel@lists.sourceforge.net
Cc: linux390@de.ibm.com
Cc: linux-alpha@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-cris-kernel@axis.com
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux@lists.openrisc.net
Cc: linux-m32r-ja@ml.linux-m32r.org
Cc: linux-m32r@ml.linux-m32r.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When lockdep turns itself off, the following message is logged:
Please attach the output of /proc/lock_stat to the bug report
Omit this message when CONFIG_LOCK_STAT is off, and /proc/lock_stat
doesn't exist.
Signed-off-by: Andreas Gruenbacher <andreas.gruenbacher@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1405451452-3824-1-git-send-email-andreas.gruenbacher@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf fixes from Ingo Molnar:
"Tooling fixes and an Intel PMU driver fixlet"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Do not allow optimized switch for non-cloned events
perf/x86/intel: ignore CondChgd bit to avoid false NMI handling
perf symbols: Get kernel start address by symbol name
perf tools: Fix segfault in cumulative.callchain report
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTwvRvAAoJEHm+PkMAQRiG8CoIAJucWkj+MJFFoDXjR9hfI8U7
/WeQLJP0GpWGMXd2KznX9epCuw5rsuaPAxCy1HFDNOa7OtNYacWrsIhByxOIDLwL
YjDB9+fpMMPFWsr+LPJa8Ombh/TveCS77w6Pt5VMZFwvIKujiNK/C3MdxjReH5Gr
iTGm8x7nEs2D6L2+5sQVlhXot/97phxIlBSP6wPXEiaztNZ9/JZi905Xpgq+WU16
ZOA8MlJj1TQD4xcWyUcsQ5REwIOdQ6xxPF00wv/12RFela+Puy4JLAilnV6Mc12U
fwYOZKbUNBS8rjfDDdyX3sljV1L5iFFqKkW3WFdnv/z8ZaZSo5NupWuavDnifKw=
=6Q8o
-----END PGP SIGNATURE-----
Merge tag 'v3.16-rc5' into timers/core
Reason: Bring in upstream modifications, so the pending changes which
depend on them can be queued.
Cosmetic, but replace_preds() doesn't need/use "char *filter_string".
Remove it to microsimplify the code.
Link: http://lkml.kernel.org/p/20140715184832.GA20519@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
filter_free_subsystem_preds(), filter_free_subsystem_filters() and
replace_system_preds() can simply check file->system->subsystem and
avoid strcmp(call->class->system).
Better yet, we can pass "struct ftrace_subsystem_dir *dir" instead of
event_subsystem and just check file->system == dir.
Thanks to Namhyung Kim who pointed out that replace_system_preds() can
be changed too.
Link: http://lkml.kernel.org/p/20140715184829.GA20516@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
alloc_trace_uprobe() sets TRACE_EVENT_FL_USE_CALL_FILTER for unknown
reason and this is simply wrong. Fortunately this has no effect because
register_uprobe_event() clears call->flags after that.
Kill both. This trace_uprobe was kzalloc'ed and we rely on this fact
anyway.
Link: http://lkml.kernel.org/p/20140715184824.GA20505@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It seems that the only purpose of call_filter_disable() is to
make filter_disable() less clear and symmetrical, remove it.
Link: http://lkml.kernel.org/p/20140715184821.GA20498@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove destroy_call_preds(). Its only caller, __trace_remove_event_call(),
can use free_event_filter() and nullify ->filter by hand.
Perhaps we could keep this trivial helper although imo it is pointless, but
then it should be static in trace_events.c.
Link: http://lkml.kernel.org/p/20140715184816.GA20495@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
destroy_preds() makes no sense.
The only caller, event_remove(), actually wants destroy_file_preds().
__trace_remove_event_call() does destroy_call_preds() which takes care
of call->filter.
And after the previous change we can simply remove destroy_preds() from
event_remove(), we are going to call remove_event_from_tracers() which
in turn calls remove_event_file_dir()->free_event_filter().
Link: http://lkml.kernel.org/p/20140715184813.GA20488@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If there isn't a nohz_full= kernel parameter specified, then
tick_nohz_full_mask can legitimately be NULL. This can cause
problems when RCU's boot code tries to cpumask_or() this value into
rcu_nocb_mask. In addition, if NO_HZ_FULL_ALL=y, there is no point
in doing the cpumask_or() in the first place because this will cause
RCU_NOCB_CPU_ALL=y, which in turn will have all bits already set in
rcu_nocb_mask.
This commit therefore avoids the cpumask_or() if NO_HZ_FULL_ALL=y
and checks for !tick_nohz_full_running otherwise, this latter check
catching cases when there was no nohz_full= kernel parameter specified.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently if an arch supports function graph tracing, the core code will
just assign the function graph trampoline to the function graph addr that
gets called.
But as the old method for function graph tracing always calls the function
trampoline first and that calls the function graph trampoline, some
archs may have the function graph trampoline dependent on operations that
were done in the function trampoline. This causes function graph tracer
to break on those archs.
Instead of having the default be to set the function graph ftrace_ops
to the function graph trampoline, have it instead just set it to zero
which will keep it from jumping to a trampoline that is not set up
to be jumped directly too.
Link: http://lkml.kernel.org/r/53BED155.9040607@nvidia.com
Reported-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Tested-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It is currently not possible for various wait_on_bit functions
to implement a timeout.
While the "action" function that is called to do the waiting
could certainly use schedule_timeout(), there is no way to carry
forward the remaining timeout after a false wake-up.
As false-wakeups a clearly possible at least due to possible
hash collisions in bit_waitqueue(), this is a real problem.
The 'action' function is currently passed a pointer to the word
containing the bit being waited on. No current action functions
use this pointer. So changing it to something else will be a
little noisy but will have no immediate effect.
This patch changes the 'action' function to take a pointer to
the "struct wait_bit_key", which contains a pointer to the word
containing the bit so nothing is really lost.
It also adds a 'private' field to "struct wait_bit_key", which
is initialized to zero.
An action function can now implement a timeout with something
like
static int timed_out_waiter(struct wait_bit_key *key)
{
unsigned long waited;
if (key->private == 0) {
key->private = jiffies;
if (key->private == 0)
key->private -= 1;
}
waited = jiffies - key->private;
if (waited > 10 * HZ)
return -EAGAIN;
schedule_timeout(waited - 10 * HZ);
return 0;
}
If any other need for context in a waiter were found it would be
easy to use ->private for some other purpose, or even extend
"struct wait_bit_key".
My particular need is to support timeouts in nfs_release_page()
to avoid deadlocks with loopback mounted NFS.
While wait_on_bit_timeout() would be a cleaner interface, it
will not meet my need. I need the timeout to be sensitive to
the state of the connection with the server, which could change.
So I need to use an 'action' interface.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051604.28027.41257.stgit@notabene.brown
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current "wait_on_bit" interface requires an 'action'
function to be provided which does the actual waiting.
There are over 20 such functions, many of them identical.
Most cases can be satisfied by one of just two functions, one
which uses io_schedule() and one which just uses schedule().
So:
Rename wait_on_bit and wait_on_bit_lock to
wait_on_bit_action and wait_on_bit_lock_action
to make it explicit that they need an action function.
Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io
which are *not* given an action function but implicitly use
a standard one.
The decision to error-out if a signal is pending is now made
based on the 'mode' argument rather than being encoded in the action
function.
All instances of the old wait_on_bit and wait_on_bit_lock which
can use the new version have been changed accordingly and their
action functions have been discarded.
wait_on_bit{_lock} does not return any specific error code in the
event of a signal so the caller must check for non-zero and
interpolate their own error code as appropriate.
The wait_on_bit() call in __fscache_wait_on_invalidate() was
ambiguous as it specified TASK_UNINTERRUPTIBLE but used
fscache_wait_bit_interruptible as an action function.
David Howells confirms this should be uniformly
"uninterruptible"
The main remaining user of wait_on_bit{,_lock}_action is NFS
which needs to use a freezer-aware schedule() call.
A comment in fs/gfs2/glock.c notes that having multiple 'action'
functions is useful as they display differently in the 'wchan'
field of 'ps'. (and /proc/$PID/wchan).
As the new bit_wait{,_io} functions are tagged "__sched", they
will not show up at all, but something higher in the stack. So
the distinction will still be visible, only with different
function names (gds2_glock_wait versus gfs2_glock_dq_wait in the
gfs2/glock.c case).
Since first version of this patch (against 3.15) two new action
functions appeared, on in NFS and one in CIFS. CIFS also now
uses an action function that makes the same freezer aware
schedule call as NFS.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: David Howells <dhowells@redhat.com> (fscache, keys)
Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2)
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Just like with mutexes (CONFIG_MUTEX_SPIN_ON_OWNER),
encapsulate the dependencies for rwsem optimistic spinning.
No logical changes here as it continues to depend on both
SMP and the XADD algorithm variant.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Jason Low <jason.low2@hp.com>
[ Also make it depend on ARCH_SUPPORTS_ATOMIC_RMW. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1405112406-13052-2-git-send-email-davidlohr@hp.com
Cc: aswin@hp.com
Cc: Chris Mason <clm@fb.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The optimistic spin code assumes regular stores and cmpxchg() play nice;
this is found to not be true for at least: parisc, sparc32, tile32,
metag-lock1, arc-!llsc and hexagon.
There is further wreckage, but this in particular seemed easy to
trigger, so blacklist this.
Opt in for known good archs.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: John David Anglin <dave.anglin@bell.net>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: stable@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/20140606175316.GV13930@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are two definitions of struct rw_semaphore, one in linux/rwsem.h
and one in linux/rwsem-spinlock.h.
For some reason they have different names for the initial field. This
makes it impossible to use C99 named initialization for
__RWSEM_INITIALIZER() -- or we have to duplicate that entire thing
along with the structure definitions.
The simpler patch is renaming the rwsem-spinlock variant to match the
regular rwsem.
This allows us to switch to C99 named initialization.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-bmrZolsbGmautmzrerog27io@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Due to divergent trees, Rik find that this patch is no longer
required.
Requested-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-u6odkgkw8wz3m7orgsjfo5pi@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As pointed out by Andi Kleen, the usage of static keys can be racy in
sched_feat_disable() vs. sched_feat_enable(). Currently, we first check the
value of keys->enabled, and subsequently update the branch direction. This,
can be racy and can potentially leave the keys in an inconsistent state.
Take the i_mutex around these calls to resolve the race.
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/9d7780c83db26683955cd01e6bc654ee2586e67f.1404315388.git.jbaron@akamai.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We always use resched_task() with rq->curr argument.
It's not possible to reschedule any task but rq's current.
The patch introduces resched_curr(struct rq *) to
replace all of the repeating patterns. The main aim
is cleanup, but there is a little size profit too:
(before)
$ size kernel/sched/built-in.o
text data bss dec hex filename
155274 16445 7042 178761 2ba49 kernel/sched/built-in.o
$ size vmlinux
text data bss dec hex filename
7411490 1178376 991232 9581098 92322a vmlinux
(after)
$ size kernel/sched/built-in.o
text data bss dec hex filename
155130 16445 7042 178617 2b9b9 kernel/sched/built-in.o
$ size vmlinux
text data bss dec hex filename
7411362 1178376 991232 9580970 9231aa vmlinux
I was choosing between resched_curr() and resched_rq(),
and the first name looks better for me.
A little lie in Documentation/trace/ftrace.txt. I have not
actually collected the tracing again. With a hope the patch
won't make execution times much worse :)
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140628200219.1778.18735.stgit@localhost
Signed-off-by: Ingo Molnar <mingo@kernel.org>
proc_sched_show_task() does:
if (nr_switches)
do_div(avg_atom, nr_switches);
nr_switches is unsigned long and do_div truncates it to 32 bits, which
means it can test non-zero on e.g. x86-64 and be truncated to zero for
division.
Fix the problem by using div64_ul() instead.
As a side effect calculations of avg_atom for big nr_switches are now correct.
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1402750809-31991-1-git-send-email-mguzik@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following patch added another way to get mmap name: 78d683e838
("mm, fs: Add vm_ops->name as an alternative to arch_vma_name")
The vdso vma mapping already switch to this and we no longer get vdso
name via arch_vma_name function. Adding this way to the perf mmap
event name retrieval code.
Caught this via perf test:
$ sudo ./perf test -v 7
7: Validate PERF_RECORD_* events & perf_sample fields :
--- start ---
SNIP
PERF_RECORD_MMAP for [vdso] missing!
test child finished with 255
---- end ----
Validate PERF_RECORD_* events & perf_sample fields: FAILED!
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1405353439-14211-1-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the unlock function of the cancellable MCS spinlock, the first
thing we do is to retrive the current CPU's osq node. However, due to
the changes made in the previous patch, in the common case where the
lock is not contended, we wouldn't need to access the current CPU's
osq node anymore.
This patch optimizes this by only retriving this CPU's osq node
after we attempt the initial cmpxchg to unlock the osq and found
that its contended.
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Norton <scott.norton@hp.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1405358872-3732-5-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, we initialize the osq lock by directly setting the lock's values. It
would be preferable if we use an init macro to do the initialization like we do
with other locks.
This patch introduces and uses a macro and function for initializing the osq lock.
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Norton <scott.norton@hp.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Link: http://lkml.kernel.org/r/1405358872-3732-4-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The cancellable MCS spinlock is currently used to queue threads that are
doing optimistic spinning. It uses per-cpu nodes, where a thread obtaining
the lock would access and queue the local node corresponding to the CPU that
it's running on. Currently, the cancellable MCS lock is implemented by using
pointers to these nodes.
In this patch, instead of operating on pointers to the per-cpu nodes, we
store the CPU numbers in which the per-cpu nodes correspond to in atomic_t.
A similar concept is used with the qspinlock.
By operating on the CPU # of the nodes using atomic_t instead of pointers
to those nodes, this can reduce the overhead of the cancellable MCS spinlock
by 32 bits (on 64 bit systems).
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Norton <scott.norton@hp.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chris Mason <clm@fb.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Link: http://lkml.kernel.org/r/1405358872-3732-3-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, the per-cpu nodes structure for the cancellable MCS spinlock is
named "optimistic_spin_queue". However, in a follow up patch in the series
we will be introducing a new structure that serves as the new "handle" for
the lock. It would make more sense if that structure is named
"optimistic_spin_queue". Additionally, since the current use of the
"optimistic_spin_queue" structure are "nodes", it might be better if we
rename them to "node" anyway.
This preparatory patch renames all current "optimistic_spin_queue"
to "optimistic_spin_node".
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Norton <scott.norton@hp.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chris Mason <clm@fb.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Link: http://lkml.kernel.org/r/1405358872-3732-2-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 4fc828e24c ("locking/rwsem: Support optimistic spinning")
introduced a major performance regression for workloads such as
xfs_repair which mix read and write locking of the mmap_sem across
many threads. The result was xfs_repair ran 5x slower on 3.16-rc2
than on 3.15 and using 20x more system CPU time.
Perf profiles indicate in some workloads that significant time can
be spent spinning on !owner. This is because we don't set the lock
owner when readers(s) obtain the rwsem.
In this patch, we'll modify rwsem_can_spin_on_owner() such that we'll
return false if there is no lock owner. The rationale is that if we
just entered the slowpath, yet there is no lock owner, then there is
a possibility that a reader has the lock. To be conservative, we'll
avoid spinning in these situations.
This patch reduced the total run time of the xfs_repair workload from
about 4 minutes 24 seconds down to approximately 1 minute 26 seconds,
back to close to the same performance as on 3.15.
Retesting of AIM7, which were some of the workloads used to test the
original optimistic spinning code, confirmed that we still get big
performance gains with optimistic spinning, even with this additional
regression fix. Davidlohr found that while the 'custom' workload took
a performance hit of ~-14% to throughput for >300 users with this
additional patch, the overall gain with optimistic spinning is
still ~+45%. The 'disk' workload even improved by ~+15% at >1000 users.
Tested-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1404532172.2572.30.camel@j-VirtualBox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince reported that commit 15a2d4de0e ("perf: Always destroy groups
on exit") causes a regression with grouped events. In particular his
read_group_attached.c test fails.
https://github.com/deater/perf_event_tests/blob/master/tests/bugs/read_group_attached.c
Because of the context switch optimization in
perf_event_context_sched_out() the 'original' event may end up in the
child process and when that exits the change in the patch in question
destroys the actual grouping.
Therefore revert that change and only destroy inherited groups.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-zedy3uktcp753q8fw8dagx7a@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ring_buffer_poll_wait() should always put the poll_table to its wait_queue
even there is immediate data available. Otherwise, the following epoll and
read sequence will eventually hang forever:
1. Put some data to make the trace_pipe ring_buffer read ready first
2. epoll_ctl(efd, EPOLL_CTL_ADD, trace_pipe_fd, ee)
3. epoll_wait()
4. read(trace_pipe_fd) till EAGAIN
5. Add some more data to the trace_pipe ring_buffer
6. epoll_wait() -> this epoll_wait() will block forever
~ During the epoll_ctl(efd, EPOLL_CTL_ADD,...) call in step 2,
ring_buffer_poll_wait() returns immediately without adding poll_table,
which has poll_table->_qproc pointing to ep_poll_callback(), to its
wait_queue.
~ During the epoll_wait() call in step 3 and step 6,
ring_buffer_poll_wait() cannot add ep_poll_callback() to its wait_queue
because the poll_table->_qproc is NULL and it is how epoll works.
~ When there is new data available in step 6, ring_buffer does not know
it has to call ep_poll_callback() because it is not in its wait queue.
Hence, block forever.
Other poll implementation seems to call poll_wait() unconditionally as the very
first thing to do. For example, tcp_poll() in tcp.c.
Link: http://lkml.kernel.org/p/20140610060637.GA14045@devbig242.prn2.facebook.com
Cc: stable@vger.kernel.org # 2.6.27
Fixes: 2a2cc8f7c4 "ftrace: allow the event pipe to be polled"
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Martin Lau <kafai@fb.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The TRACE_ITER_PRINTK check in __trace_puts/__trace_bputs is missing,
so add it, to be consistent with __trace_printk/__trace_bprintk.
Those functions are all called by the same function: trace_printk().
Link: http://lkml.kernel.org/p/51E7A7D6.8090900@huawei.com
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the create_worker() is called from non-manager, the struct worker
is allocated from the node of the caller which may be different from the
node of pool->node.
So we add a node ID argument for the alloc_worker() to ensure the
struct worker is allocated from the preferable node.
tj: @nid renamed to @node for consistency.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Running my ftrace tests on PowerPC, it failed the test that checks
if function_graph tracer is affected by the stack tracer. It was.
Looking into this, I found that the update_function_graph_func()
must be called even if the trampoline function is not changed.
This is because archs like PowerPC do not support ftrace_ops being
passed by assembly and instead uses a helper function (what the
trampoline function points to). Since this function is not changed
even when multiple ftrace_ops are added to the code, the test that
falls out before calling update_function_graph_func() will miss that
the update must still be done.
Call update_function_graph_function() for all calls to
update_ftrace_function()
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
cgrp_dfl_root_inhibit_ss_mask determines which subsystems are not
supported on the default hierarchy and is currently initialized
statically and just includes the debug subsystem. Now that there's
cgroup_subsys->dfl_files, we can easily tell which subsystems support
the default hierarchy or not.
Let's initialize cgrp_dfl_root_inhibit_ss_mask by testing whether
cgroup_subsys->dfl_files is NULL. After all, subsystems with NULL
->dfl_files aren't useable on the default hierarchy anyway.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup now distinguishes cftypes for the default and legacy
hierarchies more explicitly by using separate arrays and
CFTYPE_ONLY_ON_DFL and CFTYPE_INSANE should be and are used only
inside cgroup core proper. Let's make it clear that the flags are
internal by prefixing them with double underscores.
CFTYPE_INSANE is renamed to __CFTYPE_NOT_ON_DFL for consistency. The
two flags are also collected and assigned bits >= 16 so that they
aren't mixed with the published flags.
v2: Convert the extra ones in cgroup_exit_cftypes() which are added by
revision to the previous patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Until now, cftype arrays carried files for both the default and legacy
hierarchies and the files which needed to be used on only one of them
were flagged with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE. This
gets confusing very quickly and we may end up exposing interface files
to the default hierarchy without thinking it through.
This patch makes cgroup core provide separate sets of interfaces for
cftype handling so that the cftypes for the default and legacy
hierarchies are clearly distinguished. The previous two patches
renamed the existing ones so that they clearly indicate that they're
for the legacy hierarchies. This patch adds the interface for the
default hierarchy and apply them selectively depending on the
hierarchy type.
* cftypes added through cgroup_subsys->dfl_cftypes and
cgroup_add_dfl_cftypes() only show up on the default hierarchy.
* cftypes added through cgroup_subsys->legacy_cftypes and
cgroup_add_legacy_cftypes() only show up on the legacy hierarchies.
* cgroup_subsys->dfl_cftypes and ->legacy_cftypes can point to the
same array for the cases where the interface files are identical on
both types of hierarchies.
* This makes all the existing subsystem interface files legacy-only by
default and all subsystems will have no interface file created when
enabled on the default hierarchy. Each subsystem should explicitly
review and compose the interface for the default hierarchy.
* A boot param "cgroup__DEVEL__legacy_files_on_dfl" is added which
makes subsystems which haven't decided the interface files for the
default hierarchy to present the legacy files on the default
hierarchy so that its behavior on the default hierarchy can be
tested. As the awkward name suggests, this is for development only.
* memcg's CFTYPE_INSANE on "use_hierarchy" is noop now as the whole
array isn't used on the default hierarchy. The flag is removed.
v2: Updated documentation for cgroup__DEVEL__legacy_files_on_dfl.
v3: Clear CFTYPE_ONLY_ON_DFL and CFTYPE_INSANE when cfts are removed
as suggested by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Currently, cftypes added by cgroup_add_cftypes() are used for both the
unified default hierarchy and legacy ones and subsystems can mark each
file with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE if it has to
appear only on one of them. This is quite hairy and error-prone.
Also, we may end up exposing interface files to the default hierarchy
without thinking it through.
cgroup_subsys will grow two separate cftype addition functions and
apply each only on the hierarchies of the matching type. This will
allow organizing cftypes in a lot clearer way and encourage subsystems
to scrutinize the interface which is being exposed in the new default
hierarchy.
In preparation, this patch adds cgroup_add_legacy_cftypes() which
currently is a simple wrapper around cgroup_add_cftypes() and replaces
all cgroup_add_cftypes() usages with it.
While at it, this patch drops a completely spurious return from
__hugetlb_cgroup_file_init().
This patch doesn't introduce any functional differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Currently, cgroup_subsys->base_cftypes is used for both the unified
default hierarchy and legacy ones and subsystems can mark each file
with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE if it has to appear
only on one of them. This is quite hairy and error-prone. Also, we
may end up exposing interface files to the default hierarchy without
thinking it through.
cgroup_subsys will grow two separate cftype arrays and apply each only
on the hierarchies of the matching type. This will allow organizing
cftypes in a lot clearer way and encourage subsystems to scrutinize
the interface which is being exposed in the new default hierarchy.
In preparation, this patch renames cgroup_subsys->base_cftypes to
cgroup_subsys->legacy_cftypes. This patch is pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Currently cgroup_base_files[] contains the cgroup core interface files
for both legacy and default hierarchies with each file tagged with
CFTYPE_INSANE and CFTYPE_ONLY_ON_DFL. This is difficult to read.
Let's separate it out to two separate tables, cgroup_dfl_base_files[]
and cgroup_legacy_base_files[], and use the appropriate one in
cgroup_mkdir() depending on the hierarchy type. This makes tagging
each file unnecessary.
This patch doesn't introduce any behavior changes.
v2: cgroup_dfl_base_files[] was missing the termination entry
triggering WARN in cgroup_init_cftypes() for 0day kernel testing
robot. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Jet Chen <jet.chen@intel.com>
Currently trace option stacktrace is not applicable for
trace_printk with constant string argument, the reason is
in __trace_puts/__trace_bputs ftrace_trace_stack is missing.
In contrast, when using trace_printk with non constant string
argument(will call into __trace_printk/__trace_bprintk), then
trace option stacktrace is workable, this inconstant result
will confuses users a lot.
Link: http://lkml.kernel.org/p/51E7A7C9.9040401@huawei.com
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch fixes a NULL pointer dereference issue introduced by
commit 1f0b63866f (ACPI / PM: Hold ACPI scan lock over the "freeze"
sleep state).
Fixes: 1f0b63866f (ACPI / PM: Hold ACPI scan lock over the "freeze" sleep state)
Link: http://marc.info/?l=linux-pm&m=140541182017443&w=2
Reported-and-tested-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The commit [247bc037: PM / Sleep: Mitigate race between the freezer
and request_firmware()] introduced the finer state control, but it
also leads to a new bug; for example, a bug report regarding the
firmware loading of intel BT device at suspend/resume:
https://bugzilla.novell.com/show_bug.cgi?id=873790
The root cause seems to be a small window between the process resume
and the clear of usermodehelper lock. The request_firmware() function
checks the UMH lock and gives up when it's in UMH_DISABLE state. This
is for avoiding the invalid f/w loading during suspend/resume phase.
The problem is, however, that usermodehelper_enable() is called at the
end of thaw_processes(). Thus, a thawed process in between can kick
off the f/w loader code path (in this case, via btusb_setup_intel())
even before the call of usermodehelper_enable(). Then
usermodehelper_read_trylock() returns an error and request_firmware()
spews WARN_ON() in the end.
This oneliner patch fixes the issue just by setting to UMH_FREEZING
state again before restarting tasks, so that the call of
request_firmware() will be blocked until the end of this function
instead of returning an error.
Fixes: 247bc03742 (PM / Sleep: Mitigate race between the freezer and request_firmware())
Link: https://bugzilla.novell.com/show_bug.cgi?id=873790
Cc: 3.4+ <stable@vger.kernel.org> # 3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If an IRQ has been configured for wakeup via enable_irq_wake(), the
driver who has done that must be prepared for receiving interrupts
after suspend_device_irqs() has returned, so there is no need to
"suspend" such IRQs. Moreover, if drivers using enable_irq_wake()
actually want to receive interrupts after suspend_device_irqs() has
returned, they need to add IRQF_NO_SUSPEND to the IRQ flags while
requesting the IRQs, which shouldn't be necessary (it also goes a bit
too far, as IRQF_NO_SUSPEND causes the IRQ to be ignored by
suspend_device_irqs() all the time regardless of whether or not it
has been configured for signaling wakeup).
For the above reasons, make __disable_irq() ignore IRQ descriptors
with IRQD_WAKEUP_STATE set when its suspend argument is true which
effectively causes them to behave like IRQs with IRQF_NO_SUSPEND
set.
This also allows IRQs configured for wakeup via enable_irq_wake()
to work as wakeup interrupts for the "freeze" (suspend-to-idle)
sleep mode automatically just like for any other sleep states.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Li Aubrey <aubrey.li@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Link: http://lkml.kernel.org/r/4679574.kGUnqAuNl9@vostro.rjw.lan
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
try_to_grab_pending() was re-calculating the associated pwq using
get_work_pwq() when it already has it cached in a local varible and
the association can't change. Reuse the local variable instead.
This doesn't introduce any functional changes.
tj: Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull cgroup fixes from Tejun Heo:
"Mostly fixes for the fallouts from the recent cgroup core changes.
The decoupled nature of cgroup dynamic hierarchy management
(hierarchies are created dynamically on mount but may or may not be
reused once unmounted depending on remaining usages) led to more
ugliness being added to kernfs.
Hopefully, this is the last of it"
* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: break kernfs active protection in cpuset_write_resmask()
cgroup: fix a race between cgroup_mount() and cgroup_kill_sb()
kernfs: introduce kernfs_pin_sb()
cgroup: fix mount failure in a corner case
cpuset,mempolicy: fix sleeping function called from invalid context
cgroup: fix broken css_has_online_children()
Pull workqueue fixes from Tejun Heo:
"Two workqueue fixes. Both are one liners. One fixes missing uevent
for workqueue files on sysfs. The other one fixes missing zeroing of
NUMA cpu masks which can lead to oopses among other things"
* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: zero cpumask of wq_numa_possible_cpumask on init
workqueue: fix dev_set_uevent_suppress() imbalance
cpuset.cpus and cpuset.mems are the configured masks, and we need
to export effective masks to userspace, so users know the real
cpus_allowed and mems_allowed that apply to the tasks in a cpuset.
v2:
- export those masks unconditionally, suggested by Tejun.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
As the configured masks won't be limited by its parent, and the top
cpuset's masks won't change when hotplug happens, it's natural to
allow writing offlined masks to the configured masks.
If on default hierarchy:
# echo 0 > /sys/devices/system/cpu/cpu1/online
# mkdir /cpuset/sub
# echo 1 > /cpuset/sub/cpuset.cpus
# cat /cpuset/sub/cpuset.cpus
1
If on legacy hierarchy:
# echo 0 > /sys/devices/system/cpu/cpu1/online
# mkdir /cpuset/sub
# echo 1 > /cpuset/sub/cpuset.cpus
-bash: echo: write error: Invalid argument
Note the checks don't need to be gated by cgroup_on_dfl, because we've
initialized top_cpuset.{cpus,mems}_allowed accordingly in cpuset_bind().
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Firstly offline cpu1:
# echo 0-1 > cpuset.cpus
# echo 0 > /sys/devices/system/cpu/cpu1/online
# cat cpuset.cpus
0-1
# cat cpuset.effective_cpus
0
Then online it:
# echo 1 > /sys/devices/system/cpu/cpu1/online
# cat cpuset.cpus
0-1
# cat cpuset.effective_cpus
0-1
And cpuset will bring it back to the effective mask.
The implementation is quite straightforward. Instead of calculating the
offlined cpus/mems and do updates, we just set the new effective_mask
to online_mask & congifured_mask.
This is a behavior change for default hierarchy, so legacy hierarchy
won't be affected.
v2:
- make refactoring of cpuset_hotplug_update_tasks() as seperate patch,
suggested by Tejun.
- make hotplug_update_tasks_insane() use @new_cpus and @new_mems as
hotplug_update_tasks_sane() does.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We mix the handling for both default hierarchy and legacy hierarchy in
the same function, and it's quite messy, so split into two functions.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now we've used effective cpumasks to enforce hierarchical manner,
we can use cs->{cpus,mems}_allowed as configured masks.
Configured masks can be changed by writing cpuset.cpus and cpuset.mems
only. The new behaviors are:
- They won't be changed by hotplug anymore.
- They won't be limited by its parent's masks.
This ia a behavior change, but won't take effect unless mount with
sane_behavior.
v2:
- Add comments to explain the differences between configured masks and
effective masks.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now we can use cs->effective_{cpus,mems} as effective masks. It's
used whenever:
- we update tasks' cpus_allowed/mems_allowed,
- we want to retrieve tasks_cs(tsk)'s cpus_allowed/mems_allowed.
They actually replace effective_{cpu,node}mask_cpuset().
effective_mask == configured_mask & parent effective_mask except when
the reault is empty, in which case it inherits parent effective_mask.
The result equals the mask computed from effective_{cpu,node}mask_cpuset().
This won't affect the original legacy hierarchy, because in this case we
make sure the effective masks are always the same with user-configured
masks.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We now have to support different behaviors for default hierachy and
legacy hiearchy, top_cpuset's configured masks need to be initialized
accordingly.
Suppose we've offlined cpu1.
On default hierarchy:
# mount -t cgroup -o __DEVEL__sane_behavior xxx /cpuset
# cat /cpuset/cpuset.cpus
0-15
On legacy hierarchy:
# mount -t cgroup xxx /cpuset
# cat /cpuset/cpuset.cpus
0,2-15
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We're going to have separate user-configured masks and effective ones.
Eventually configured masks can only be changed by writing cpuset.cpus
and cpuset.mems, and they won't be restricted by parent cpuset. While
effective masks reflect cpu/memory hotplug and hierachical restriction,
and these are the real masks that apply to the tasks in the cpuset.
We calculate effective mask this way:
- top cpuset's effective_mask == online_mask, otherwise
- cpuset's effective_mask == configured_mask & parent effective_mask,
if the result is empty, it inherits parent effective mask.
Those behavior changes are for default hierarchy only. For legacy
hierarchy, effective_mask and configured_mask are the same, so we won't
break old interfaces.
We should partition sched domains according to effective_cpus, which
is the real cpulist that takes effects on tasks in the cpuset.
This won't introduce behavior change.
v2:
- Add a comment for the call of rebuild_sched_domains(), suggested
by Tejun.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We're going to have separate user-configured masks and effective ones.
Eventually configured masks can only be changed by writing cpuset.cpus
and cpuset.mems, and they won't be restricted by parent cpuset. While
effective masks reflect cpu/memory hotplug and hierachical restriction,
and these are the real masks that apply to the tasks in the cpuset.
We calculate effective mask this way:
- top cpuset's effective_mask == online_mask, otherwise
- cpuset's effective_mask == configured_mask & parent effective_mask,
if the result is empty, it inherits parent effective mask.
Those behavior changes are for default hierarchy only. For legacy
hierarchy, effective_mask and configured_mask are the same, so we won't
break old interfaces.
To make cs->effective_{cpus,mems} to be effective masks, we need to
- update the effective masks at hotplug
- update the effective masks at config change
- take on ancestor's mask when the effective mask is empty
The last item is done here.
This won't introduce behavior change.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We're going to have separate user-configured masks and effective ones.
Eventually configured masks can only be changed by writing cpuset.cpus
and cpuset.mems, and they won't be restricted by parent cpuset. While
effective masks reflect cpu/memory hotplug and hierachical restriction,
and these are the real masks that apply to the tasks in the cpuset.
We calculate effective mask this way:
- top cpuset's effective_mask == online_mask, otherwise
- cpuset's effective_mask == configured_mask & parent effective_mask,
if the result is empty, it inherits parent effective mask.
Those behavior changes are for default hierarchy only. For legacy
hierarchy, effective_mask and configured_mask are the same, so we won't
break old interfaces.
To make cs->effective_{cpus,mems} to be effective masks, we need to
- update the effective masks at hotplug
- update the effective masks at config change
- take on ancestor's mask when the effective mask is empty
The second item is done here. We don't need to treat root_cs specially
in update_cpumasks_hier().
This won't introduce behavior change.
v3:
- add a WARN_ON() to check if effective masks are the same with configured
masks on legacy hierarchy.
- pass trialcs->cpus_allowed to update_cpumasks_hier() and add a comment for
it. Similar change for update_nodemasks_hier(). Suggested by Tejun.
v2:
- revise the comment in update_{cpu,node}masks_hier(), suggested by Tejun.
- fix to use @cp instead of @cs in these two functions.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We're going to have separate user-configured masks and effective ones.
Eventually configured masks can only be changed by writing cpuset.cpus
and cpuset.mems, and they won't be restricted by parent cpuset. While
effective masks reflect cpu/memory hotplug and hierachical restriction,
and these are the real masks that apply to the tasks in the cpuset.
We calculate effective mask this way:
- top cpuset's effective_mask == online_mask, otherwise
- cpuset's effective_mask == configured_mask & parent effective_mask,
if the result is empty, it inherits parent effective mask.
Those behavior changes are for default hierarchy only. For legacy
hierarchy, effective_mask and configured_mask are the same, so we won't
break old interfaces.
To make cs->effective_{cpus,mems} to be effective masks, we need to
- update the effective masks at hotplug
- update the effective masks at config change
- take on ancestor's mask when the effective mask is empty
The first item is done here.
This won't introduce behavior change.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We're going to have separate user-configured masks and effective ones.
Eventually configured masks can only be changed by writing cpuset.cpus
and cpuset.mems, and they won't be restricted by parent cpuset. While
effective masks reflect cpu/memory hotplug and hierachical restriction,
and these are the real masks that apply to the tasks in the cpuset.
We calculate effective mask this way:
- top cpuset's effective_mask == online_mask, otherwise
- cpuset's effective_mask == configured_mask & parent effective_mask,
if the result is empty, it inherits parent effective mask.
Those behavior changes are for default hierarchy only. For legacy
hierachy, effective_mask and configured_mask are the same, so we won't
break old interfaces.
This patch adds the effective masks to struct cpuset and initializes
them. The effective masks of the top cpuset is the same with configured
masks, and a child cpuset inherits its parent's effective masks.
This won't introduce behavior change.
v2:
- s/real_{mems,cpus}_allowed/effective_{mems,cpus}, suggested by Tejun.
- don't init effective masks in cpuset_css_online() if !cgroup_on_dfl.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit annotates rcu_report_unblock_qs_rnp() in order to fix the
following sparse warning:
kernel/rcu/tree_plugin.h:990:13: warning: context imbalance in 'rcu_report_unblock_qs_rnp' - unexpected unlock
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This commit annotates rcu_initiate_boost() fixes the following sparse
warning:
kernel/rcu/tree_plugin.h:1494:13: warning: context imbalance in 'rcu_initiate_boost' - unexpected unlock
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
The __rcu_reclaim() function returned 0/1, which is not proper for a
function of type bool. This commit therefore converts to false/true.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
The CONFIG_PROVE_RCU_DELAY Kconfig parameter doesn't appear to be very
effective at finding race conditions, so this commit removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
[ paulmck: Remove definition and uses as noted by Paul Bolle. ]
Although NMI-based stack dumps are in principle more accurate, they are
also more likely to trigger deadlocks. This commit therefore replaces
all uses of trigger_all_cpu_backtrace() with rcu_dump_cpu_stacks(), so
that the CPU detecting an RCU CPU stall does the stack dumping.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Binding the grace-period kthreads to the timekeeping CPU resulted in
significant performance decreases for some workloads. For more detail,
see:
https://lkml.org/lkml/2014/6/3/395 for benchmark numbers
https://lkml.org/lkml/2014/6/4/218 for CPU statistics
It turns out that it is necessary to bind the grace-period kthreads
to the timekeeping CPU only when all but CPU 0 is a nohz_full CPU
on the one hand or if CONFIG_NO_HZ_FULL_SYSIDLE=y on the other.
In other cases, it suffices to bind the grace-period kthreads to the
set of non-nohz_full CPUs.
This commit therefore creates a tick_nohz_not_full_mask that is the
complement of tick_nohz_full_mask, and then binds the grace-period
kthread to the set of CPUs indicated by this new mask, which covers
the CONFIG_NO_HZ_FULL_SYSIDLE=n case. The CONFIG_NO_HZ_FULL_SYSIDLE=y
case still binds the grace-period kthreads to the timekeeping CPU.
This commit also includes the tick_nohz_full_enabled() check suggested
by Frederic Weisbecker.
Reported-by: Jet Chen <jet.chen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Created housekeeping_affine() and housekeeping_mask per
fweisbec feedback. ]
RCU priority boosting currently checks for boosting via a pointer in
task_struct. However, this is not needed: As Oleg noted, if the
rt_mutex is placed in the rcu_node instead of on the booster's stack,
the boostee can simply check it see if it owns the lock. This commit
makes this change, shrinking task_struct by one pointer and the kernel
by thirteen lines.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_start_future_gp() function checks the current rcu_node's ->gpnum
and ->completed twice, once without ACCESS_ONCE() and once with it.
Which is pointless because we hold that rcu_node's ->lock at that point.
The intent was to check the current rcu_node structure and the root
rcu_node structure, the latter locklessly with ACCESS_ONCE(). This
commit therefore makes that change.
The reason that it is safe to locklessly check the root rcu_nodes's
->gpnum and ->completed fields is that we hold the current rcu_node's
->lock, which constrains the root rcu_node's ability to change its
->gpnum and ->completed fields. Of course, if there is a single rcu_node
structure, then rnp_root==rnp, and holding the lock prevents all changes.
If there is more than one rcu_node structure, then the code updates the
fields in the following order:
1. Increment rnp_root->gpnum to start new grace period.
2. Increment rnp->gpnum to initialize the current rcu_node,
continuing initialization for the new grace period.
3. Increment rnp_root->completed to end the current grace period.
4. Increment rnp->completed to continue cleaning up after the
old grace period.
So there are four possible combinations of relative values of these
four fields:
N N N N: RCU idle, new grace period must be initiated.
Although rnp_root->gpnum might be incremented immediately
after we check, that will just result in unnecessary work.
The grace period already started, and we try to start it.
N+1 N N N: RCU grace period just started. No further change is
possible because we hold rnp->lock, so the checks of
rnp_root->gpnum and rnp_root->completed are stable.
We know that our request for a future grace period will
be seen during grace-period cleanup.
N+1 N N+1 N: RCU grace period is ongoing. Because rnp->gpnum is
different than rnp->completed, we won't even look at
rnp_root->gpnum and rnp_root->completed, so the possible
concurrent change to rnp_root->completed does not matter.
We know that our request for a future grace period will
be seen during grace-period cleanup, which cannot pass
this rcu_node because we hold its ->lock.
N+1 N+1 N+1 N: RCU grace period has ended, but not yet been cleaned up.
Because rnp->gpnum is different than rnp->completed, we
won't look at rnp_root->gpnum and rnp_root->completed, so
the possible concurrent change to rnp_root->completed does
not matter. We know that our request for a future grace
period will be seen during grace-period cleanup, which
cannot pass this rcu_node because we hold its ->lock.
Therefore, despite initial appearances, the lockless check is safe.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[ paulmck: Update comment to say why the lockless check is safe. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current approach to RCU priority boosting uses an rt_mutex strictly
for its priority-boosting side effects. The rt_mutex_init_proxy_locked()
function is used by the booster to initialize the lock as held by the
boostee. The booster then uses rt_mutex_lock() to acquire this rt_mutex,
which priority-boosts the boostee. When the boostee reaches the end
of its outermost RCU read-side critical section, it checks a field in
its task structure to see whether it has been boosted, and, if so, uses
rt_mutex_unlock() to release the rt_mutex. The booster can then go on
to boost the next task that is blocking the current RCU grace period.
But reasonable implementations of rt_mutex_unlock() might result in the
boostee referencing the rt_mutex's data after releasing it. But the
booster might have re-initialized the rt_mutex between the time that the
boostee released it and the time that it later referenced it. This is
clearly asking for trouble, so this commit introduces a completion that
forces the booster to wait until the boostee has completely finished with
the rt_mutex, thus avoiding the case where the booster is re-initializing
the rt_mutex before the last boostee's last reference to that rt_mutex.
This of course does introduce some overhead, but the priority-boosting
code paths are miles from any possible fastpath, and the overhead of
executing the completion will normally be quite small compared to the
overhead of priority boosting and deboosting, so this should be OK.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The m68k architecture aligns only to 16-bit boundaries, which can cause
the align-to-32-bits check in __call_rcu() to trigger. Because there is
currently no known potential need for more than one low-order bit, this
commit loosens the check to 16-bit boundaries.
Reported-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
RCU contains code of the following forms:
ACCESS_ONCE(x)++;
ACCESS_ONCE(x) += y;
ACCESS_ONCE(x) -= y;
Now these constructs do operate correctly, but they really result in a
pair of volatile accesses, one to do the load and another to do the store.
This can be confusing, as the casual reader might well assume that (for
example) gcc might generate a memory-to-memory add instruction for each
of these three cases. In fact, gcc will do no such thing. Also, there
is a good chance that the kernel will move to separate load and store
variants of ACCESS_ONCE(), and constructs like the above could easily
confuse both people and scripts attempting to make that sort of change.
Finally, most of RCU's read-modify-write uses of ACCESS_ONCE() really
only need the store to be volatile, so that the read-modify-write form
might be misleading.
This commit therefore changes the above forms in RCU so that each instance
of ACCESS_ONCE() either does a load or a store, but not both. In a few
cases, ACCESS_ONCE() was not critical, for example, for maintaining
statisitics. In these cases, ACCESS_ONCE() has been dispensed with
entirely.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In kernels built with CONFIG_NO_HZ_FULL, tick_do_timer_cpu is constant
once boot completes. Thus, there is no need to wrap it in ACCESS_ONCE()
in code that is built only when CONFIG_NO_HZ_FULL. This commit therefore
removes the redundant ACCESS_ONCE().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Those two arrays are being passed to lockdep_init_map(), which expects
const char *, and are stored in lockdep_map the same way.
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The explicit local_irq_save() in __lock_task_sighand() is needed to avoid
a potential deadlock condition, as noted in a841796f11 (signal:
align __lock_task_sighand() irq disabling and RCU). However, someone
reading the code might be forgiven for concluding that this separate
local_irq_save() was completely unnecessary. This commit therefore adds
a comment referencing the shiny new block comment on rcu_read_unlock().
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
After the previous patch to remove sane_behavior support from
non-default hierarchies, CGRP_ROOT_SANE_BEHAVIOR is used only to
indicate the default hierarchy while parsing mount options. This
patch makes the following cleanups around it.
* Don't show it in the mount option. Eventually the default hierarchy
will be assigned a different filesystem type.
* As sane_behavior is no longer effective on non-default hierarchies
and the default hierarchy doesn't accept any mount options,
parse_cgroupfs_options() can consider sane_behavior mount option as
indicating the default hierarchy and fail if any other options are
specified with it. While at it, remove one of the double blank
lines in the function.
* cgroup_mount() can now simply test CGRP_ROOT_SANE_BEHAVIOR to tell
whether to mount the default hierarchy or not.
* As CGROUP_ROOT_SANE_BEHAVIOR's only role now is indicating whether
to select the default hierarchy or not during mount, it doesn't need
to be set in the default hierarchy itself. cgroup_init_early()
updated accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
sane_behavior has been used as a development vehicle for the default
unified hierarchy. Now that the default hierarchy is in place, the
flag became redundant and confusing as its usage is allowed on all
hierarchies. There are gonna be either the default hierarchy or
legacy ones. Let's make that clear by removing sane_behavior support
on non-default hierarchies.
This patch replaces cgroup_sane_behavior() with cgroup_on_dfl(). The
comment on top of CGRP_ROOT_SANE_BEHAVIOR is moved to on top of
cgroup_on_dfl() with sane_behavior specific part dropped.
On the default and legacy hierarchies w/o sane_behavior, this
shouldn't cause any behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
"cgroup.sane_behavior" is added to help distinguishing whether
sane_behavior is in effect or not. We now have the default hierarchy
where the flag is always in effect and are planning to remove
supporting sane behavior on the legacy hierarchies making this file on
the default hierarchy rather pointless. Let's make it legacy only and
thus always zero.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_root->flags only contains CGRP_ROOT_* flags and there's no
reason to mask the flags. Remove CGRP_ROOT_OPTION_MASK.
This doesn't cause any behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
idle_exit event is the first event after a core exits
idle state. So this should be traced before local irq
is ebabled. Likewise idle_entry is the last event before
a core enters idle state. This will ease visualising the
cpu idle state from kernel traces.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[rjw: Subject, rebase]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, the blkio subsystem attributes all of writeback IOs to the
root. One of the issues is that there's no way to tell who originated
a writeback IO from block layer. Those IOs are usually issued
asynchronously from a task which didn't have anything to do with
actually generating the dirty pages. The memory subsystem, when
enabled, already keeps track of the ownership of each dirty page and
it's desirable for blkio to piggyback instead of adding its own
per-page tag.
blkio piggybacking on memory is an implementation detail which
preferably should be handled automatically without requiring explicit
userland action. To achieve that, this patch implements
cgroup_subsys->depends_on which contains the mask of subsystems which
should be enabled together when the subsystem is enabled.
The previous patches already implemented the support for enabled but
invisible subsystems and cgroup_subsys->depends_on can be easily
implemented by updating cgroup_refresh_child_subsys_mask() so that it
calculates cgroup->child_subsys_mask considering
cgroup_subsys->depends_on of the explicitly enabled subsystems.
Documentation/cgroups/unified-hierarchy.txt is updated to explain that
subsystems may not become immediately available after being unused
from userland and that dependency could be a factor in it. As
subsystems may already keep residual references, this doesn't
significantly change how subsystem rebinding can be used.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
cgroup is implementing support for subsystem dependency which would
require a way to enable a subsystem even when it's not directly
configured through "cgroup.subtree_control".
The previous patches added support for explicitly and implicitly
enabled subsystems and showing/hiding their interface files. An
explicitly enabled subsystem may become implicitly enabled if it's
turned off through "cgroup.subtree_control" but there are subsystems
depending on it. In such cases, the subsystem, as it's turned off
when seen from userland, shouldn't enforce any resource control.
Also, the subsystem may be explicitly turned on later again and its
interface files should be as close to the intial state as possible.
This patch adds cgroup_subsys->css_reset() which is invoked when a css
is hidden. The callback should disable resource control and reset the
state to the vanilla state.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
cgroup is implementing support for subsystem dependency which would
require a way to enable a subsystem even when it's not directly
configured through "cgroup.subtree_control".
The preceding patch distinguished cgroup->subtree_control and
->child_subsys_mask where the former is the subsystems explicitly
configured by the userland and the latter is all enabled subsystems
currently is equal to the former but will include subsystems
implicitly enabled through dependency.
Subsystems which are enabled due to dependency shouldn't be visible to
userland. This patch updates cgroup_subtree_control_write() and
create_css() such that interface files are not created for implicitly
enabled subsytems.
* @visible paramter is added to create_css(). Interface files are
created only when true.
* If an already implicitly enabled subsystem is turned on through
"cgroup.subtree_control", the existing css should be used. css
draining is skipped.
* cgroup_subtree_control_write() computes the new target
cgroup->child_subsys_mask and create/kill or show/hide csses
accordingly.
As the two subsystem masks are still kept identical, this patch
doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
cgroup is implementing support for subsystem dependency which would
require a way to enable a subsystem even when it's not directly
configured through "cgroup.subtree_control".
Previously, cgroup->child_subsys_mask directly reflected
"cgroup.subtree_control" and the enabled subsystems in the child
cgroups. This patch adds cgroup->subtree_control which
"cgroup.subtree_control" operates on. cgroup->child_subsys_mask is
now calculated from cgroup->subtree_control by
cgroup_refresh_child_subsys_mask(), which sets it identical to
cgroup->subtree_control for now.
This will allow using cgroup->child_subsys_mask for all the enabled
subsystems including the implicit ones and ->subtree_control for
tracking the explicitly requested ones. This patch keeps the two
masks identical and doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Make the following two reorganizations to
cgroup_subtree_control_write(). These are to prepare for future
changes and shouldn't cause any functional difference.
* Move availability above css offlining wait.
* Move cgrp->child_subsys_mask update above new css creation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Sharvil noticed with the posix timer_settime interface, using the
CLOCK_REALTIME_ALARM or CLOCK_BOOTTIME_ALARM clockid, if the users
tried to specify a relative time timer, it would incorrectly be
treated as absolute regardless of the state of the flags argument.
This patch corrects this, properly checking the absolute/relative flag,
as well as adds further error checking that no invalid flag bits are set.
Reported-by: Sharvil Nanavati <sharvil@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sharvil Nanavati <sharvil@google.com>
Cc: stable <stable@vger.kernel.org> #3.0+
Link: http://lkml.kernel.org/r/1404767171-6902-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Enabling NO_HZ_FULL currently has the side effect of enabling callback
offloading on all CPUs. This results in lots of additional rcuo kthreads,
and can also increase context switching and wakeups, even in cases where
callback offloading is neither needed nor particularly desirable. This
commit therefore enables callback offloading on a given CPU only if
specifically requested at build time or boot time, or if that CPU has
been specifically designated (again, either at build time or boot time)
as a nohz_full CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
An 80-CPU system with a context-switch-heavy workload can require so
many NOCB kthread wakeups that the RCU grace-period kthreads spend several
tens of percent of a CPU just awakening things. This clearly will not
scale well: If you add enough CPUs, the RCU grace-period kthreads would
get behind, increasing grace-period latency.
To avoid this problem, this commit divides the NOCB kthreads into leaders
and followers, where the grace-period kthreads awaken the leaders each of
whom in turn awakens its followers. By default, the number of groups of
kthreads is the square root of the number of CPUs, but this default may
be overridden using the rcutree.rcu_nocb_leader_stride boot parameter.
This reduces the number of wakeups done per grace period by the RCU
grace-period kthread by the square root of the number of CPUs, but of
course by shifting those wakeups to the leaders. In addition, because
the leaders do grace periods on behalf of their respective followers,
the number of wakeups of the followers decreases by up to a factor of two.
Instead of being awakened once when new callbacks arrive and again
at the end of the grace period, the followers are awakened only at
the end of the grace period.
For a numerical example, in a 4096-CPU system, the grace-period kthread
would awaken 64 leaders, each of which would awaken its 63 followers
at the end of the grace period. This compares favorably with the 79
wakeups for the grace-period kthread on an 80-CPU system.
Reported-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Since the torture-test thread creation interface does not include
format string arguments, this commit makes sure the name can never be
accidentally processed as a format string.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
When hot-adding and onlining CPU, kernel panic occurs, showing following
call trace.
BUG: unable to handle kernel paging request at 0000000000001d08
IP: [<ffffffff8114acfd>] __alloc_pages_nodemask+0x9d/0xb10
PGD 0
Oops: 0000 [#1] SMP
...
Call Trace:
[<ffffffff812b8745>] ? cpumask_next_and+0x35/0x50
[<ffffffff810a3283>] ? find_busiest_group+0x113/0x8f0
[<ffffffff81193bc9>] ? deactivate_slab+0x349/0x3c0
[<ffffffff811926f1>] new_slab+0x91/0x300
[<ffffffff815de95a>] __slab_alloc+0x2bb/0x482
[<ffffffff8105bc1c>] ? copy_process.part.25+0xfc/0x14c0
[<ffffffff810a3c78>] ? load_balance+0x218/0x890
[<ffffffff8101a679>] ? sched_clock+0x9/0x10
[<ffffffff81105ba9>] ? trace_clock_local+0x9/0x10
[<ffffffff81193d1c>] kmem_cache_alloc_node+0x8c/0x200
[<ffffffff8105bc1c>] copy_process.part.25+0xfc/0x14c0
[<ffffffff81114d0d>] ? trace_buffer_unlock_commit+0x4d/0x60
[<ffffffff81085a80>] ? kthread_create_on_node+0x140/0x140
[<ffffffff8105d0ec>] do_fork+0xbc/0x360
[<ffffffff8105d3b6>] kernel_thread+0x26/0x30
[<ffffffff81086652>] kthreadd+0x2c2/0x300
[<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60
[<ffffffff815f20ec>] ret_from_fork+0x7c/0xb0
[<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60
In my investigation, I found the root cause is wq_numa_possible_cpumask.
All entries of wq_numa_possible_cpumask is allocated by
alloc_cpumask_var_node(). And these entries are used without initializing.
So these entries have wrong value.
When hot-adding and onlining CPU, wq_update_unbound_numa() is called.
wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq()
calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set
as follow:
3592 /* if cpumask is contained inside a NUMA node, we belong to that node */
3593 if (wq_numa_enabled) {
3594 for_each_node(node) {
3595 if (cpumask_subset(pool->attrs->cpumask,
3596 wq_numa_possible_cpumask[node])) {
3597 pool->node = node;
3598 break;
3599 }
3600 }
3601 }
But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong
node is selected. As a result, kernel panic occurs.
By this patch, all entries of wq_numa_possible_cpumask are allocated by
zalloc_cpumask_var_node to initialize them. And the panic disappeared.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Fixes: bce903809a ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]")
Pull irq fixes from Thomas Gleixner:
"A few minor fixlets in ARM SoC irq drivers and a fix for a memory leak
which I introduced in the last round of cleanups :("
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Fix memory leak when calling irq_free_hwirqs()
irqchip: spear_shirq: Fix interrupt offset
irqchip: brcmstb-l2: Level-2 interrupts are edge sensitive
irqchip: armada-370-xp: Mask all interrupts during initialization.
irq_free_hwirqs() always calls irq_free_descs() with a cnt == 0
which makes it a no-op since the interrupt count to free is
decremented in itself.
Fixes: 7b6ef12625
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/1404167084-8070-1-git-send-email-keith.busch@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The mutex_trylock() function calls into __mutex_trylock_fastpath() when
trying to obtain the mutex. On 32 bit x86, in the !__HAVE_ARCH_CMPXCHG
case, __mutex_trylock_fastpath() calls directly into __mutex_trylock_slowpath()
regardless of whether or not the mutex is locked.
In __mutex_trylock_slowpath(), we then acquire the wait_lock spinlock, xchg()
lock->count with -1, then set lock->count back to 0 if there are no waiters,
and return true if the prev lock count was 1.
However, if the mutex is already locked, then there isn't much point
in attempting all of the above expensive operations. In this patch, we only
attempt the above trylock operations if the mutex is unlocked.
Signed-off-by: Jason Low <jason.low2@hp.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: akpm@linux-foundation.org
Cc: tim.c.chen@linux.intel.com
Cc: paulmck@linux.vnet.ibm.com
Cc: rostedt@goodmis.org
Cc: Waiman.Long@hp.com
Cc: scott.norton@hp.com
Cc: aswin@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1402511843-4721-5-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Upon entering the slowpath in __mutex_lock_common(), we try once more to
acquire the mutex. We only try to acquire if (lock->count >= 0). However,
what we actually want here is to try to acquire if the mutex is unlocked
(lock->count == 1).
This patch changes it so that we only try-acquire the mutex upon entering
the slowpath if it is unlocked, rather than if the lock count is non-negative.
This helps further reduce unnecessary atomic xchg() operations.
Furthermore, this patch uses !mutex_is_locked(lock) to do the initial
checks for if the lock is free rather than directly calling atomic_read()
on the lock->count, in order to improve readability.
Signed-off-by: Jason Low <jason.low2@hp.com>
Acked-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: akpm@linux-foundation.org
Cc: tim.c.chen@linux.intel.com
Cc: paulmck@linux.vnet.ibm.com
Cc: rostedt@goodmis.org
Cc: davidlohr@hp.com
Cc: scott.norton@hp.com
Cc: aswin@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1402511843-4721-4-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MUTEX_SHOW_NO_WAITER() is a macro which checks for if there are
"no waiters" on a mutex by checking if the lock count is non-negative.
Based on feedback from the discussion in the earlier version of this
patchset, the macro is not very readable.
Furthermore, checking lock->count isn't always the correct way to
determine if there are "no waiters" on a mutex. For example, a negative
count on a mutex really only means that there "potentially" are
waiters. Likewise, there can be waiters on the mutex even if the count is
non-negative. Thus, "MUTEX_SHOW_NO_WAITER" doesn't always do what the name
of the macro suggests.
So this patch deletes the MUTEX_SHOW_NO_WAITERS() macro, directly
use atomic_read() instead of the macro, and adds comments which
elaborate on how the extra atomic_read() checks can help reduce
unnecessary xchg() operations.
Signed-off-by: Jason Low <jason.low2@hp.com>
Acked-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: akpm@linux-foundation.org
Cc: tim.c.chen@linux.intel.com
Cc: paulmck@linux.vnet.ibm.com
Cc: rostedt@goodmis.org
Cc: davidlohr@hp.com
Cc: scott.norton@hp.com
Cc: aswin@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1402511843-4721-3-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
1) Iterate thru all of threads in the system.
Check for all threads, not only for group leaders.
2) Check for p->on_rq instead of p->state and cputime.
Preempted task in !TASK_RUNNING state OR just
created task may be queued, that we want to be
reported too.
3) Use read_lock() instead of write_lock().
This function does not change any structures, and
read_lock() is enough.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Cc: Konstantin Khorenko <khorenko@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael wang <wangyun@linux.vnet.ibm.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Turner <pjt@google.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Todd E Brandt <todd.e.brandt@linux.intel.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403684395.3462.44.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make rt_rq available for pick_next_task(). Otherwise, their tasks
stay prisoned long time till dead cpu becomes alive again.
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
CC: Konstantin Khorenko <khorenko@parallels.com>
CC: Ben Segall <bsegall@google.com>
CC: Paul Turner <pjt@google.com>
CC: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403684388.3462.43.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We kill rq->rd on the CPU_DOWN_PREPARE stage:
cpuset_cpu_inactive -> cpuset_update_active_cpus -> partition_sched_domains ->
-> cpu_attach_domain -> rq_attach_root -> set_rq_offline
This unthrottles all throttled cfs_rqs.
But the cpu is still able to call schedule() till
take_cpu_down->__cpu_disable()
is called from stop_machine.
This case the tasks from just unthrottled cfs_rqs are pickable
in a standard scheduler way, and they are picked by dying cpu.
The cfs_rqs becomes throttled again, and migrate_tasks()
in migration_call skips their tasks (one more unthrottle
in migrate_tasks()->CPU_DYING does not happen, because rq->rd
is already NULL).
Patch sets runtime_enabled to zero. This guarantees, the runtime
is not accounted, and the cfs_rqs won't exceed given
cfs_rq->runtime_remaining = 1, and tasks will be pickable
in migrate_tasks(). runtime_enabled is recalculated again
when rq becomes online again.
Ben Segall also noticed, we always enable runtime in
tg_set_cfs_bandwidth(). Actually, we should do that for online
cpus only. To prevent races with unthrottle_offline_cfs_rqs()
we take get_online_cpus() lock.
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
CC: Konstantin Khorenko <khorenko@parallels.com>
CC: Paul Turner <pjt@google.com>
CC: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403684382.3462.42.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reading through the scan period code and comment, it appears the
intent was to slow down NUMA scanning when a majority of accesses
are on the local node, specifically a local:remote ratio of 3:1.
However, the code actually tests local / (local + remote), and
the actual cut-off point was around 30% local accesses, well before
a task has actually converged on a node.
Changing the threshold to 7 means scanning slows down when a task
has around 70% of its accesses local, which appears to match the
intent of the code more closely.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: mgorman@suse.de
Cc: chegu_vinod@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403538095-31256-8-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix up the best node setting in task_numa_migrate() to deal with a task
in a pseudo-interleaved NUMA group, which is already running in the
best location.
Set the task's preferred nid to the current nid, so task migration is
not retried at a high rate.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: mgorman@suse.de
Cc: chegu_vinod@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403538095-31256-7-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Running "perf bench numa mem -0 -m -P 1000 -p 8 -t 20" on a 4
node system results in 160 runnable threads on a system with 80
CPU threads.
Once a process has nearly converged, with 39 threads on one node
and 1 thread on another node, the remaining thread will be unable
to migrate to its preferred node through a task swap.
However, a simple task move would make the workload converge,
witout causing an imbalance.
Test for this unlikely occurrence, and attempt a task move to
the preferred nid when it happens.
# Running main, "perf bench numa mem -p 8 -t 20 -0 -m -P 1000"
###
# 160 tasks will execute (on 4 nodes, 80 CPUs):
# -1x 0MB global shared mem operations
# -1x 1000MB process shared mem operations
# -1x 0MB thread local mem operations
###
###
#
# 0.0% [0.2 mins] 0/0 1/1 36/2 0/0 [36/3 ] l: 0-0 ( 0) {0-2}
# 0.0% [0.3 mins] 43/3 37/2 39/2 41/3 [ 6/10] l: 0-1 ( 1) {1-2}
# 0.0% [0.4 mins] 42/3 38/2 40/2 40/2 [ 4/9 ] l: 1-2 ( 1) [50.0%] {1-2}
# 0.0% [0.6 mins] 41/3 39/2 40/2 40/2 [ 2/9 ] l: 2-4 ( 2) [50.0%] {1-2}
# 0.0% [0.7 mins] 40/2 40/2 40/2 40/2 [ 0/8 ] l: 3-5 ( 2) [40.0%] ( 41.8s converged)
Without this patch, this same perf bench numa mem run had to
rely on the scheduler load balancer to first balance out the
load (moving a random task), before a task swap could complete
the NUMA convergence.
The load balancer does not normally take action unless the load
difference exceeds 25%. Convergence times of over half an hour
have been observed without this patch.
With this patch, the NUMA balancing code will simply migrate the
task, if that does not cause an imbalance.
Also skip examining a CPU in detail if the improvement on that CPU
is no more than the best we already have.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: chegu_vinod@hp.com
Cc: mgorman@suse.de
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-ggthh0rnh0yua6o5o3p6cr1o@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a task is part of a numa_group, the comparison should always use
the group weight, in order to make workloads converge.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: chegu_vinod@hp.com
Cc: mgorman@suse.de
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403538378-31571-4-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When CONFIG_FAIR_GROUP_SCHED is enabled, the load that a task places
on a CPU is determined by the group the task is in. The active groups
on the source and destination CPU can be different, resulting in a
different load contribution by the same task at its source and at its
destination. As a result, the load needs to be calculated separately
for each CPU, instead of estimated once with task_h_load().
Getting this calculation right allows some workloads to converge,
where previously the last thread could get stuck on another node,
without being able to migrate to its final destination.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: mgorman@suse.de
Cc: chegu_vinod@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403538378-31571-3-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently the NUMA code scales the load on each node with the
amount of CPU power available on that node, but it does not
apply any adjustment to the load of the task that is being
moved over.
On systems with SMT/HT, this results in a task being weighed
much more heavily than a CPU core, and a task move that would
even out the load between nodes being disallowed.
The correct thing is to apply the power correction to the
numbers after we have first applied the move of the tasks'
loads to them.
This also allows us to do the power correction with a multiplication,
rather than a division.
Also drop two function arguments for load_too_unbalanced, since it
takes various factors from env already.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: chegu_vinod@hp.com
Cc: mgorman@suse.de
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403538378-31571-2-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
From task_numa_placement, always try to consolidate the tasks
in a group on the group's top nid.
In case this task is part of a group that is interleaved over
multiple nodes, task_numa_migrate will set the task's preferred
nid to the best node it could find for the task, so this patch
will cause at most one run through task_numa_migrate.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: mgorman@suse.de
Cc: chegu_vinod@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403538095-31256-2-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a system is lightly loaded (i.e. no more than 1 job per cpu),
attempt to pull job to a cpu before putting it to idle is unnecessary and
can be skipped. This patch adds an indicator so the scheduler can know
when there's no more than 1 active job is on any CPU in the system to
skip needless job pulls.
On a 4 socket machine with a request/response kind of workload from
clients, we saw about 0.13 msec delay when we go through a full load
balance to try pull job from all the other cpus. While 0.1 msec was
spent on processing the request and generating a response, the 0.13 msec
load balance overhead was actually more than the actual work being done.
This overhead can be skipped much of the time for lightly loaded systems.
With this patch, we tested with a netperf request/response workload that
has the server busy with half the cpus in a 4 socket system. We found
the patch eliminated 75% of the load balance attempts before idling a cpu.
The overhead of setting/clearing the indicator is low as we already gather
the necessary info while we call add_nr_running() and update_sd_lb_stats.()
We switch to full load balance load immediately if any cpu got more than
one job on its run queue in add_nr_running. We'll clear the indicator
to avoid load balance when we detect no cpu's have more than one job
when we scan the work queues in update_sg_lb_stats(). We are aggressive
in turning on the load balance and opportunistic in skipping the load
balance.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Jason Low <jason.low2@hp.com>
Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403551009.2970.613.camel@schen9-DESK
Signed-off-by: Ingo Molnar <mingo@kernel.org>
