Commit graph

24 commits

Author SHA1 Message Date
Russell King
7a79279e71 drm/arm: hdlcd: fix plane base address update
While testing HDMI with Xorg on the Juno board, I find that when Xorg
starts up or shuts down, the display is shifted significantly to the
right and wrapped in the active region.  (No sync bars are visible.)
The timings are correct, it behaves as if the start address has been
shifted many pixels _into_ the framebuffer.

This occurs whenever the display mode size is changed - using xrandr
in Xorg shows that changing the resolution triggers the problem
almost every time, but changing the refresh rate does not.

Using devmem2 to disable and re-enable the HDLCD resolves the issue,
and repeated disable/enable cycles do not make the issue re-appear.
Further debugging shows that we try to update the controller
configuration while enabled.

Alwys ensure that the HDLCD is disabled prior to updating the
controller timings, and use drm_crtc_vblank_off()/drm_crtc_vblank_on()
so that DRM knows whether it can expect vblank interrupts.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-22 14:09:06 +00:00
Tom Gundersen
0f2886057b drm: Don't swallow error codes in drm_dev_alloc()
There are many reasons other than ENOMEM that drm_dev_init() can
fail. Return ERR_PTR rather than NULL to be able to distinguish
these in the caller.

Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-2-teg@jklm.no
2016-09-22 04:03:48 -07:00
Liu Ying
2b58e98d42 drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commit
Drivers may set the NO_DISABLE_AFTER_MODESET flag in the 'flags' parameter
of the helper drm_atomic_helper_commit_planes() if the relevant display
controllers(e.g., IPUv3 for imx-drm) require to disable a CRTC's planes
when the CRTC is disabled. The helper would skip the ->atomic_disable
call for a plane if the CRTC of the old plane state needs a modesetting
operation. Of course, the drivers need to disable the planes in their CRTC
disable callbacks since no one else would do that.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1472461923-14364-1-git-send-email-gnuiyl@gmail.com
2016-08-29 11:29:37 +02:00
Joonas Lahtinen
31ad61e4af drm: BIT(DRM_ROTATE_?) -> DRM_ROTATE_?
Only property creation uses the rotation as an index, so convert the
to figure the index when needed.

v2: Use the new defines to build the _MASK defines (Sean)

Cc: intel-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: malidp@foss.arm.com
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1469771405-17653-1-git-send-email-joonas.lahtinen@linux.intel.com
2016-08-08 14:17:56 -04:00
Wei Yongjun
12ae57aab4 drm/arm: mali-dp: Fix error return code in malidp_bind()
Fix to return error code -EINVAL from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 3c31760e76 ('drm/arm: mali-dp: Set crtc.port to the port
instead of the endpoint')
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1469672066-13401-1-git-send-email-weiyj.lk@gmail.com
2016-07-28 12:59:56 +02:00
Wei Yongjun
1a9d71f84c drm/arm: mali-dp: Remove redundant dev_err call in malidp_bind()
There is a error message within devm_ioremap_resource
already, so remove the DRM_ERROR call to avoid redundant
error message.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1469671753-12961-1-git-send-email-weiyj.lk@gmail.com
2016-07-28 12:59:12 +02:00
Brian Starkey
3c31760e76 drm/arm: mali-dp: Set crtc.port to the port instead of the endpoint
The CRTC's port pointer was being set to the endpoint node instead of
the port. Fix that, and hold a reference on the port node.

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1469549725-19577-1-git-send-email-brian.starkey@arm.com
2016-07-26 13:23:58 -04:00
Tobias Jakobi
f39c9096d6 drm/arm: make fbdev support really optional
Currently enabling ARM HDLCD DRM support automatically pulls
in fbdev dependency. However this dep is unnecessary since
DRM core already handles this for us (DRM_FBDEV_EMULATION).

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-21-git-send-email-tjakobi@math.uni-bielefeld.de
2016-07-18 09:11:42 +02:00
Markus Elfring
536cea6073 drm/hdlcd: Delete an unnecessary check before drm_fbdev_cma_hotplug_event()
The drm_fbdev_cma_hotplug_event() function tests whether its argument
is NULL and then returns immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/c2b0f310-fa06-f4cc-0014-ea7f40564d26@users.sourceforge.net
2016-07-18 09:11:31 +02:00
Liviu Dudau
ad49f8602f drm/arm: Add support for Mali Display Processors
Add support for the new family of Display Processors from ARM Ltd.
This commit adds basic support for Mali DP500, DP550 and DP650
parts, with only the display engine being supported at the moment.

Cc: David Brown <David.Brown@arm.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-06-15 17:29:22 +01:00
Daniel Vetter
2bd6cc8c79 drm/hdlcd: Use helper support for nonblocking commits
With the fixed up drm event handling for crtc_state->event we can just
use the helper support for nonblocking commits.

Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Tested-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-12-git-send-email-daniel.vetter@ffwll.ch
2016-06-10 17:11:17 +02:00
Dave Airlie
2cca455740 Merge tag 'topic/drm-misc-2016-06-07' of git://anongit.freedesktop.org/drm-intel into drm-next
As promised, piles of prep work all around:
- drm_atomic_state rework, prep for nonblocking commit helpers
- fence patches from Gustavo and Christian to prep for atomic fences and
  some cool work in ttm/amdgpu from Christian
- drm event prep for both nonblocking commit and atomic fences
- Gustavo seems on a crusade against the non-kms-native version of the
  vblank functions.
- prep work from Boris to nuke all the silly ->best_encoder
  implementations we have (we really only need that for truly dynamic
  cases like dvi-i vs dvi-d or dp mst selecting the right transcoder on
  intel)
- prep work from Laurent to rework the format handling functions
- and few small things all over

* tag 'topic/drm-misc-2016-06-07' of git://anongit.freedesktop.org/drm-intel: (47 commits)
  drm/dsi: Implement set tear scanline
  drm/fb_cma_helper: Implement fb_mmap callback
  drm/qxl: Remove useless drm_fb_get_bpp_depth() call
  drm/ast: Remove useless drm_fb_get_bpp_depth() call
  drm/atomic: Fix remaining places where !funcs->best_encoder is valid
  drm/core: Change declaration for gamma_set.
  Documentation: add fence-array to kernel DocBook
  drm/shmobile: use drm_crtc_vblank_{get,put}()
  drm/radeon: use drm_crtc_vblank_{get,put}()
  drm/qxl: use drm_crtc_vblank_{get,put}()
  drm/atmel: use drm_crtc_vblank_{get,put}()
  drm/armada: use drm_crtc_vblank_{get,put}()
  drm/amdgpu: use drm_crtc_vblank_{get,put}()
  drm/virtio: use drm_crtc_send_vblank_event()
  drm/udl: use drm_crtc_send_vblank_event()
  drm/qxl: use drm_crtc_send_vblank_event()
  drm/atmel: use drm_crtc_send_vblank_event()
  drm/armada: use drm_crtc_send_vblank_event()
  drm/doc: Switch to sphinx/rst fixed-width quoting
  drm/doc: Drop kerneldoc for static functions in drm_irq.c
  ...
2016-06-09 11:19:28 +10:00
Dave Airlie
fa625c1956 Linux 4.7-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXVJo5AAoJEHm+PkMAQRiGjioH/3H8Q26FP83Bprhrh3y5EYmz
 QSWbq5f5XHGVp4sqc45qdozklh11PrMPkNJQPT2HCTgmtzgeTX5EW9TFaQM/Ubrm
 NeYnBW0tTcLP2PhfOyOIJOjE3R1oEYIRQ7zzdOZleViYaqAW2g0frYK0l8AY/KAv
 z9mJ8s7xieqSzNTyKNfDPIciT/mO2KMbEHu92EiAkjeCfhuVxUO6PR4wLeZb/85H
 I/cOFupU1166xeOZUR0lltvPMz8JznOUB0pg2Ma67TqsNGsPPfsmxEPFlALTTJk/
 0V/hVyL4BgvO22LXwMoIxnUcwq/F3ZtlDJRhubeX7m5aS9x2Pb5mQ/g1ko0CXJA=
 =5hXk
 -----END PGP SIGNATURE-----

Backmerge tag 'v4.7-rc2' into drm-next

Daniel has a pull request that relies on stuff in fixes that are in rc2.
2016-06-09 11:01:49 +10:00
Liviu Dudau
f6c68b4bd4 drm: hdlcd: Add information about the underlying framebuffers in debugfs
drm_fb_cma code has a nice helper function to display in the debugfs
information about the underlying framebuffers used by HDLCD:

$ cat /sys/kernel/debug/dri/0/fb
fb: 1920x1200@XR24
   0: offset=0 pitch=7680, obj:  0 ( 2) 001011ba 0x00000000fc300000 ffffff800a27c000 9338880
fb: 1920x1200@XR24
   0: offset=0 pitch=7680, obj:  0 ( 2) 001008ca 0x00000000fba00000 ffffff8009987000 9338880
fb: 1920x1200@XR24
   0: offset=0 pitch=7680, obj:  0 ( 1) 00100000 0x00000000fb100000 ffffff8008fdc000 9216000

Add the entry in HDLCD's debugfs node.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-06-02 17:45:55 +01:00
Liviu Dudau
96ebb1f3ed drm: hdlcd: Cleanup the atomic plane operations
Harden the plane_check() code to drop attempts at scaling because
that is not supported. Make hdlcd_plane_atomic_update() set the pitch
and line length registers that correctly reflect the plane's values.
And make hdlcd_crtc_mode_set_nofb() a helper function for
hdlcd_crtc_enable() rather than an exposed hook.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-06-02 17:45:29 +01:00
Daniel Vetter
38c8c22c12 drm/hdlcd: Fix up crtc_state->event handling
event_list just reimplemented what drm_crtc_arm_vblank_event does. And
we also need to send out drm events when shutting down a pipe.

With this it's possible to use the new nonblocking commit support in
the helpers.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-06-02 17:44:05 +01:00
Liviu Dudau
a95acec16d drm: hdlcd: Revamp runtime power management
Because the HDLCD driver acts as a component master it can end
up enabling the runtime PM functionality before the encoders
are initialised. This can cause crashes if the component slave
never probes (missing module) or if the PM operations kick in
before the probe finishes.

Move the enabling of the runtime PM after the component master
has finished collecting the slave components and use the DRM
atomic helpers to suspend and resume the device.

Tested-by: Robin Murphy <Robin.Murphy@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-06-02 17:43:59 +01:00
Daniel Vetter
9fb3fc70ca drm/hdlcd: Clean up crtc hooks
Those are all no longer needed for a pure atomic driver.

Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Tested-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-17-git-send-email-daniel.vetter@ffwll.ch
2016-06-02 15:32:31 +02:00
Daniel Vetter
6d910bfa80 drm/hlcd: Use lockless gem BO free callback
No dev->struct_mutex anywhere to be seen.

Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-26-git-send-email-daniel.vetter@ffwll.ch
2016-05-31 13:28:36 +02:00
Daniel Vetter
fcee59065e drm: Nuke ->vblank_disable_allowed
This was added in

commit 0a3e67a4ca
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Tue Sep 30 12:14:26 2008 -0700

    drm: Rework vblank-wait handling to allow interrupt reduction.

to stay backwards-compatible with old UMS code that didn't even tell
the kernel when it did a modeset, so that the kernel could
save/restore vblank counters. At worst this means vblanks will be
somewhat funky on a setup that very likely no one still runs.

So let's just nuke it.

Plan B would be to set it unconditionally in drm_vblank_init for kms
drivers, instead of in each driver separately. So if this patch breaks
anything please only restore the hunks in drmP.h and drm_irq.c, plus
add a check for DRIVER_MODESET in drm_vblank_init.

Stumbled over this in a discussion on irc with Chris.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-21 07:03:31 +10:00
Maarten Lankhorst
51b6beff6e drm/arm/hdlcd: Rename async to nonblock.
The async name is deprecated and should be changed to nonblocking.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-4-git-send-email-maarten.lankhorst@linux.intel.com
2016-05-02 16:36:09 +02:00
Dan Carpenter
69c2565a3c drm: ARM HDLCD - fix an error code
We accidentally return PTR_ERR(NULL) which is success instead of a
negative error code.

Fixes: 879e40bea6f2 ('drm: ARM HDLCD - get rid of devm_clk_put()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-04-04 10:11:33 +01:00
Alexey Brodkin
61a6dcd77a drm: ARM HDLCD - get rid of devm_clk_put()
Clock is acquired with devm_clk_get() which already manages
corresponding resource.

I.e. in case of driver removal or failure on installaiton
clock resources will be automatically released and explicit
call of devm_clk_put() is not required.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Robin Murphy <robin.murphy@arm.com>

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-04-04 10:10:58 +01:00
Liviu Dudau
8e22d79240 drm: Add support for ARM's HDLCD controller.
The HDLCD controller is a display controller that supports resolutions
up to 4096x4096 pixels. It is present on various development boards
produced by ARM Ltd and emulated by the latest Fast Models from the
company.

Cc: David Airlie <airlied@linux.ie>
Cc: Robin Murphy <robin.murphy@arm.com>

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
[Kconfig cleanup and !CONFIG_PM fixes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-02-10 13:44:16 +00:00