Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.4
- More device quirks (Sagi, Hristo, Adrian, Daniel)
- Controller delete race (Maurizo)
- Multipath cleanup fix (Christoph)"
* tag 'nvme-6.4-2023-05-18' of git://git.infradead.org/nvme:
nvme-pci: Add quirk for Teamgroup MP33 SSD
nvme: do not let the user delete a ctrl before a complete initialization
nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk
nvme-pci: clamp max_hw_sectors based on DMA optimized limitation
nvme-pci: add quirk for missing secondary temperature thresholds
nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G
Add a quirk for Teamgroup MP33 that reports duplicate ids for disk.
Signed-off-by: Daniel Smith <dansmith@ds.gy>
[kch: patch formatting]
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Daniel Smith <dansmith@ds.gy>
Signed-off-by: Keith Busch <kbusch@kernel.org>
If a userspace application performes a "delete_controller" command
early during the ctrl initialization, the delete operation
may race against the init code and the kernel will crash.
nvme nvme5: Connect command failed: host path error
nvme nvme5: failed to connect queue: 0 ret=880
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page
blk_mq_quiesce_queue+0x18/0x90
nvme_tcp_delete_ctrl+0x24/0x40 [nvme_tcp]
nvme_do_delete_ctrl+0x7f/0x8b [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write_iter+0x124/0x1b0
new_sync_write+0xff/0x190
vfs_write+0x1ef/0x280
Fix the crash by checking the NVME_CTRL_STARTED_ONCE bit;
if it's not set it means that the nvme controller is still
in the process of getting initialized and the kernel
will return an -EBUSY error to userspace.
Set the NVME_CTRL_STARTED_ONCE later in the nvme_start_ctrl()
function, after the controller start operation is completed.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_mpath_remove_disk is called after del_gendisk, at which point a
blk_mark_disk_dead call doesn't make any sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l7Mo
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Nothing major in here, just two different parts:
- A small series from Breno that enables passing the full SQE down
for ->uring_cmd().
This is a prerequisite for enabling full network socket operations.
Queued up a bit late because of some stylistic concerns that got
resolved, would be nice to have this in 6.4-rc1 so the dependent
work will be easier to handle for 6.5.
- Fix for the huge page coalescing, which was a regression introduced
in the 6.3 kernel release (Tobias)"
* tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux:
io_uring: Remove unnecessary BUILD_BUG_ON
io_uring: Pass whole sqe to commands
io_uring: Create a helper to return the SQE size
io_uring/rsrc: check for nonconsecutive pages
Currently uring CMD operation relies on having large SQEs, but future
operations might want to use normal SQE.
The io_uring_cmd currently only saves the payload (cmd) part of the SQE,
but, for commands that use normal SQE size, it might be necessary to
access the initial SQE fields outside of the payload/cmd block. So,
saves the whole SQE other than just the pdu.
This changes slightly how the io_uring_cmd works, since the cmd
structures and callbacks are not opaque to io_uring anymore. I.e, the
callbacks can look at the SQE entries, not only, in the cmd structure.
The main advantage is that we don't need to create custom structures for
simple commands.
Creates io_uring_sqe_cmd() that returns the cmd private data as a null
pointer and avoids casting in the callee side.
Also, make most of ublk_drv's sqe->cmd priv structure into const, and use
io_uring_sqe_cmd() to get the private structure, removing the unwanted
cast. (There is one case where the cast is still needed since the
header->{len,addr} is updated in the private structure)
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-3-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When running the fio test on a 448-core AMD server + a NVME disk,
a soft lockup or a hard lockup call trace is shown:
[soft lockup]
watchdog: BUG: soft lockup - CPU#126 stuck for 23s! [swapper/126:0]
RIP: 0010:_raw_spin_unlock_irqrestore+0x21/0x50
...
Call Trace:
<IRQ>
fq_flush_timeout+0x7d/0xd0
? __pfx_fq_flush_timeout+0x10/0x10
call_timer_fn+0x2e/0x150
run_timer_softirq+0x48a/0x560
? __pfx_fq_flush_timeout+0x10/0x10
? clockevents_program_event+0xaf/0x130
__do_softirq+0xf1/0x335
irq_exit_rcu+0x9f/0xd0
sysvec_apic_timer_interrupt+0xb4/0xd0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1f/0x30
...
Obvisouly, fq_flush_timeout spends over 20 seconds. Here is ftrace log:
| fq_flush_timeout() {
| fq_ring_free() {
| put_pages_list() {
0.170 us | free_unref_page_list();
0.810 us | }
| free_iova_fast() {
| free_iova() {
* 85622.66 us | _raw_spin_lock_irqsave();
2.860 us | remove_iova();
0.600 us | _raw_spin_unlock_irqrestore();
0.470 us | lock_info_report();
2.420 us | free_iova_mem.part.0();
* 85638.27 us | }
* 85638.84 us | }
| put_pages_list() {
0.230 us | free_unref_page_list();
0.470 us | }
... ...
$ 31017069 us | }
Most of cores are under lock contention for acquiring iova_rbtree_lock due
to the iova flush queue mechanism.
[hard lockup]
NMI watchdog: Watchdog detected hard LOCKUP on cpu 351
RIP: 0010:native_queued_spin_lock_slowpath+0x2d8/0x330
Call Trace:
<IRQ>
_raw_spin_lock_irqsave+0x4f/0x60
free_iova+0x27/0xd0
free_iova_fast+0x4d/0x1d0
fq_ring_free+0x9b/0x150
iommu_dma_free_iova+0xb4/0x2e0
__iommu_dma_unmap+0x10b/0x140
iommu_dma_unmap_sg+0x90/0x110
dma_unmap_sg_attrs+0x4a/0x50
nvme_unmap_data+0x5d/0x120 [nvme]
nvme_pci_complete_batch+0x77/0xc0 [nvme]
nvme_irq+0x2ee/0x350 [nvme]
? __pfx_nvme_pci_complete_batch+0x10/0x10 [nvme]
__handle_irq_event_percpu+0x53/0x1a0
handle_irq_event_percpu+0x19/0x60
handle_irq_event+0x3d/0x60
handle_edge_irq+0xb3/0x210
__common_interrupt+0x7f/0x150
common_interrupt+0xc5/0xf0
</IRQ>
<TASK>
asm_common_interrupt+0x2b/0x40
...
ftrace shows fq_ring_free spends over 10 seconds [1]. Again, most of
cores are under lock contention for acquiring iova_rbtree_lock due
to the iova flush queue mechanism.
[Root Cause]
The root cause is that the max_hw_sectors_kb of nvme disk (mdts=10)
is 4096kb, which streaming DMA mappings cannot benefit from the
scalable IOVA mechanism introduced by the commit 9257b4a206
("iommu/iova: introduce per-cpu caching to iova allocation") if
the length is greater than 128kb.
To fix the lock contention issue, clamp max_hw_sectors based on
DMA optimized limitation in order to leverage scalable IOVA mechanism.
Note: The issue does not happen with another NVME disk (mdts = 5
and max_hw_sectors_kb = 128)
[1] https://gist.github.com/AdrianHuang/bf8ec7338204837631fbdaed25d19cc4
Suggested-by: Keith Busch <kbusch@kernel.org>
Reported-and-tested-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
On Kingston KC3000 and Kingston FURY Renegade (both have the same PCI
IDs) accessing temp3_{min,max} fails with an invalid field error (note
that there is no problem setting the thresholds for temp1).
This contradicts the NVM Express Base Specification 2.0b, page 292:
The over temperature threshold and under temperature threshold
features shall be implemented for all implemented temperature sensors
(i.e., all Temperature Sensor fields that report a non-zero value).
Define NVME_QUIRK_NO_SECONDARY_TEMP_THRESH that disables the thresholds
for all but the composite temperature and set it for this device.
Signed-off-by: Hristo Venev <hristo@venev.name>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
-----BEGIN PGP SIGNATURE-----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=W1Zb
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- drbd patches, bringing us closer to unifying the out-of-tree version
and the in tree one (Andreas, Christoph)
- support for auto-quiesce for the s390 dasd driver (Stefan)
- MD pull request via Song:
- md/bitmap: Optimal last page size (Jon Derrick)
- Various raid10 fixes (Yu Kuai, Li Nan)
- md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)
- NVMe pull request via Christoph:
- Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
- Validate nvmet module parameters (Chaitanya Kulkarni)
- Fence TCP socket on receive error (Chris Leech)
- Fix async event trace event (Keith Busch)
- Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
- Fix and cleanup nvmet Identify handling (Damien Le Moal,
Christoph Hellwig)
- Fix double blk_mq_complete_request race in the timeout handler
(Lei Yin)
- Fix irq locking in nvme-fcloop (Ming Lei)
- Remove queue mapping helper for rdma devices (Sagi Grimberg)
- use structured request attribute checks for nbd (Jakub)
- fix blk-crypto race conditions between keyslot management (Eric)
- add sed-opal support for reading read locking range attributes
(Ondrej)
- make fault injection configurable for null_blk (Akinobu)
- clean up the request insertion API (Christoph)
- clean up the queue running API (Christoph)
- blkg config helper cleanups (Tejun)
- lazy init support for blk-iolatency (Tejun)
- various fixes and tweaks to ublk (Ming)
- remove hybrid polling. It hasn't really been useful since we got
async polled IO support, and these days we don't support sync polled
IO at all (Keith)
- misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
Chaitanya, me)
* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
nbd: fix incomplete validation of ioctl arg
ublk: don't return 0 in case of any failure
sed-opal: geometry feature reporting command
null_blk: Always check queue mode setting from configfs
block: ublk: switch to ioctl command encoding
blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
block, bfq: Fix division by zero error on zero wsum
fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
block: store bdev->bd_disk->fops->submit_bio state in bdev
block: re-arrange the struct block_device fields for better layout
md/raid5: remove unused working_disks variable
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
md/raid10: fix memleak of md thread
md/raid10: fix memleak for 'conf->bio_split'
md/raid10: fix leak of 'r10bio->remaining' for recovery
md/raid10: don't BUG_ON() in raise_barrier()
md: fix soft lockup in status_resync
md: add error_handlers for raid0 and linear
md: Use optimal I/O size for last bitmap page
md: Fix types in sb writer
...
Added a quirk to fix the TeamGroup T-Force Cardea Zero Z330 SSDs reporting
duplicate NGUIDs.
Signed-off-by: Duy Truong <dory@dory.moe>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
fcloop_fcp_op() could be called from flush request's ->end_io(flush_end_io) in
which the spinlock of fq->mq_flush_lock is grabbed with irq saved/disabled.
So fcloop_fcp_op() can't call spin_unlock_irq(&tfcp_req->reqlock) simply
which enables irq unconditionally.
Fixes the warning by switching to spin_lock_irqsave()/spin_unlock_irqrestore()
Fixes: c38dbbfab1 ("nvme-fcloop: fix inconsistent lock state warnings")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
No rdma device exposes its irq vectors affinity today. So the only
mapping that we have left, is the default blk_mq_map_queues, which
we fallback to anyways. Also fixup the only consumer of this helper
(nvme-rdma).
Remove this now dead code.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When nvme_cancel_tagset traverses all tagsets and executes
nvme_cancel_request, this request may be executing blk_mq_free_request
that is called by nvme_rdma_complete_timed_out/nvme_tcp_complete_timed_out.
When blk_mq_free_request executes to WRITE_ONCE(rq->state, MQ_RQ_IDLE) and
__blk_mq_free_request(rq), it will cause double blk_mq_complete_request for
this request, and it will cause a null pointer error in the second
execution of this function because rq->mq_hctx has set to NULL in first
execution.
Signed-off-by: Lei Yin <yinlei2@lenovo.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Mixing AER Event Type and Event Info has masking clashes. Just print the
event type, but also include the event info of the AER result in the
trace.
Fixes: 09bd1ff4b1 ("nvme-core: add async event trace helper")
Reported-by: Nate Thornton <nate.thornton@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There is no need for the else when direct return is used at the end of
the function.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There is no need for the else when direct return is used at the end of
the function.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The module parameter idle_poll_period_usecs is passed to the function
usecs_to_jiffies() which has following prototype and expect
idle_poll_period_usecs arg type to be unsigned int:-
unsigned long usecs_to_jiffies(const unsigned int u);
Use similar module parameter validation callback as previous patch.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The module parameter so_priority is passed to the function
sock_set_priority() which has following prototype and expect
priotity arg type to be u32:-
void sock_set_priority(struct sock *sk, u32 priority);
Add a module parameter validation callback to reject any negative
values for the so_priority as it is defigned as int. Use this
oppurtunity to update the module parameter description and print the
default value.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Ensure that no further socket reads occur after a receive processing
error, either from io_work being re-scheduled or nvme_tcp_poll.
Failing to do so can result in unrecognised PDU payloads or TCP stream
garbage being processed as a C2H data PDU, and potentially start copying
the payload to an invalid destination after looking up a request using a
bogus command id.
Signed-off-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvmet_execute_identify_ns_zns is a more descriptive name for the
function handling the "I/O Command Set Specific Identify Namespace
Data Structure for the Zoned Namespace Command Set".
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The Identification Descriptor List CNS value does not check the CSI
value, so remove the code trying to handle it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Change the order of the cases in nvmet_execute_identify() main
switch-case to match the NVMe 2.0 specification order as defined in
table 273. This is also the increasing order of CNS values.
While at it, for clarity, make it explicit that identify with cns set
to NVME_ID_CNS_CS_NS does not support NVM command set specific data.
No functional changes are introduced by this cleanup.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For an identify command with cns set to NVME_ID_CNS_CS_CTRL, the NVMe
2.0 specification states that:
If the I/O Command Set specified by the CSI field does not have an
Identify Controller data structure, then the controller shall return
a zero filled data structure. If the host requests a data structure for
an I/O Command Set that the controller does not support, the controller
shall abort the command with a status code of Invalid Field in Command.
However, the current implementation of this identify command in
nvmet_execute_identify() only handles the ZNS command set, returning an
error for the NVM command set, which is not compliant with the
specifications as we do support this command set.
Fix this by:
1) Renaming nvmet_execute_identify_cns_cs_ctrl() to
nvmet_execute_identify_ctrl_zns() to continue handling the
ZNS command set as is.
2) Introduce a nvmet_execute_identify_ctrl_ns() helper to handle the
NVM command set, returning a zero filled nvme_id_ctrl_nvm data
structure.
3) Modify nvmet_execute_identify() to call these helpers based on
the csi specified, returning an error for unsupported command sets.
Fixes: aaf2e048af ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The identify command with cns set to NVME_ID_CNS_NS_ACTIVE_LIST does
not depend on the command set. The execution of this command should
thus not look at the csi field specified in the command. Simplify
nvmet_execute_identify() to directly call
nvmet_execute_identify_nslist() without the csi switch-case.
Fixes: ab5d0b38c0 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The identify command with cns set to NVME_ID_CNS_CTRL does not depend on
the command set. The execution of this command should thus not look at
the csi specified in the command. Simplify nvmet_execute_identify() to
directly call nvmet_execute_identify_ctrl() without the csi switch-case.
Fixes: ab5d0b38c0 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The identify command with cns set to NVME_ID_CNS_NS does not directly
depend on the command set. The NVMe specifications is rather confusing
here as it appears that this command only applies to the NVM command
set. However, footnote 8 of Figure 273 in the NVMe 2.0 base
specifications clearly state that this command applies to NVM command
sets that support logical blocks, that is, NVM and ZNS. Both the NVM and
ZNS command set specifications also list this identify as mandatory.
The command handling should thus not look at the csi field since it is
defined as unused for this command. Given that we do not support the
KV command set, simply remove the csi switch-case for that command
handling and call directly nvmet_execute_identify_ns() in
nvmet_execute_identify().
Fixes: ab5d0b38c0 ("nvmet: add Command Set Identifier support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Nvme specifications state that:
If the I/O Command Set associated with the namespace identified by the
NSID field does not support the Identify Namespace data structure
specified by the CSI field, the controller shall abort the command with
a status code of Invalid Field in Command.
In other words, if nvmet_execute_identify_cns_cs_ns() is called for a
target with a block device that is not zoned, we should not return any
data and set the status to NVME_SC_INVALID_FIELD.
While at it, it is also better to revalidate the ns block devie *before*
checking if the block device is zoned, to ensure that
nvmet_execute_identify_cns_cs_ns() operates against updated device
characteristics.
Fixes: aaf2e048af ("nvmet: add ZBD over ZNS backend support")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The device can report discard support without setting the ONCS DSM bit.
When not set, the driver clears max_discard_size expecting it to be set
later. We don't know the size until we have the namespace format,
though, so setting it is deferred until configuring one, but the driver
was abandoning the discard settings due to that initial clearing.
Move the max_discard_size calculation above the check for a '0' discard
size.
Fixes: 1a86924e4f ("nvme: fix interpretation of DMRSL")
Reported-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we allocate a nvme-tcp queue, we set the data_ready callback before
we actually need to use it. This creates the potential that if a stray
controller sends us data on the socket before we connect, we can trigger
the io_work and start consuming the socket.
In this case reported: we failed to allocate one of the io queues, and
as we start releasing the queues that we already allocated, we get
a UAF [1] from the io_work which is running before it should really.
Fix this by setting the socket ops callbacks only before we start the
queue, so that we can't accidentally schedule the io_work in the
initialization phase before the queue started. While we are at it,
rename nvme_tcp_restore_sock_calls to pair with nvme_tcp_setup_sock_ops.
[1]:
[16802.107284] nvme nvme4: starting error recovery
[16802.109166] nvme nvme4: Reconnecting in 10 seconds...
[16812.173535] nvme nvme4: failed to connect socket: -111
[16812.173745] nvme nvme4: Failed reconnect attempt 1
[16812.173747] nvme nvme4: Reconnecting in 10 seconds...
[16822.413555] nvme nvme4: failed to connect socket: -111
[16822.413762] nvme nvme4: Failed reconnect attempt 2
[16822.413765] nvme nvme4: Reconnecting in 10 seconds...
[16832.661274] nvme nvme4: creating 32 I/O queues.
[16833.919887] BUG: kernel NULL pointer dereference, address: 0000000000000088
[16833.920068] nvme nvme4: Failed reconnect attempt 3
[16833.920094] #PF: supervisor write access in kernel mode
[16833.920261] nvme nvme4: Reconnecting in 10 seconds...
[16833.920368] #PF: error_code(0x0002) - not-present page
[16833.921086] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
[16833.921191] RIP: 0010:_raw_spin_lock_bh+0x17/0x30
...
[16833.923138] Call Trace:
[16833.923271] <TASK>
[16833.923402] lock_sock_nested+0x1e/0x50
[16833.923545] nvme_tcp_try_recv+0x40/0xa0 [nvme_tcp]
[16833.923685] nvme_tcp_io_work+0x68/0xa0 [nvme_tcp]
[16833.923824] process_one_work+0x1e8/0x390
[16833.923969] worker_thread+0x53/0x3d0
[16833.924104] ? process_one_work+0x390/0x390
[16833.924240] kthread+0x124/0x150
[16833.924376] ? set_kthread_struct+0x50/0x50
[16833.924518] ret_from_fork+0x1f/0x30
[16833.924655] </TASK>
Reported-by: Yanjun Zhang <zhangyanjun@cestc.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Yanjun Zhang <zhangyanjun@cestc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Identify CNS 06h (I/O Command Set Specific Identify Controller data
structure) is supported only on i/o controllers.
But nvme_init_non_mdts_limits() currently invokes this on all
controllers. Correct this by ensuring this is sent to I/O
controllers only.
Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
io_uring_cmd_done() currently assumes that the uring_lock is held
when invoked, and while it generally is, this is not guaranteed.
Pass in the issue_flags associated with it, so that we have
IO_URING_F_UNLOCKED available to be able to lock the CQ ring
appropriately when completing events.
Cc: stable@vger.kernel.org
Fixes: ee692a21e9 ("fs,io_uring: add infrastructure for uring-cmd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to manually set the owner of a struct class, as the
registering function does it automatically, so remove all of the
explicit settings from various drivers that did so as it is unneeded.
This allows us to remove this pointer entirely from this structure going
forward.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313181843.1207845-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- avoid potential UAF in nvmet_req_complete (Damien Le Moal)
- more quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
- fix a memory leak in the nvme-pci probe teardown path (Irvin Cote)
- repair the MAINTAINERS entry (Lukas Bulwahn)
- fix handling single range discard request (Ming Lei)
- show more opcode names in trace events (Minwoo Im)
- fix nvme-tcp timeout reporting (Sagi Grimberg)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmQSy9ILHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYMCqQ/+PcaiHojkyA6B9HBNtVcLemupc2GSc8lozTIqALVT
EuTJ2AK0ox8F8MYU0ELlpkCGs9Wil135xqLURLDwLi7sKFj7S1IkaSvG+1okDDHK
hJy4U+bpu1gkyBJkB2v/PrX49lmqplFGD/2eLRFedWbZ4rF82hQRrPHYcDpRL2VF
0wmVd7lVaUQ9mOngLy1zrBFjt+rOv8d96zwfqF9m67G9rqKJLQhM45M/TiKaeUuy
3WbsVmZ715rbGv1y7YBObHfdKvs8LfNjdOdJeLNGaNOxuc2y1yOzSbaww2wWW+Wf
9mB6unjn76xW1UUzPtQs2OALZaa9r0w55IQ5A4V+ugJoDEIdxsyHSUMGDnAc1dTW
MQGNGhQyGBDD9O9XSvexOXRI+LRxyM3dXfA1dpPUW1BWZm4ACumY26cMasJEJnCr
YJtIM3SW/Sp3cRnzcN/fxKCfsDUeYTj0mFu5KjamLd1ux5w4pxJyoS9sWxh63qJz
HBnr6VFczYhf63cUoVgX0qZOKv4jwYaVolVcmuNVWWdFhzr8OC7cb+AztfVdo8M2
UbIkWxFH7f/obVd2L3N5c8+tKLaoi5R/MzHTlrov2oTP2e46sFuF6cyhtPM4zO//
lwjkIJ1JSAjvFHxEg44wBHjYIB5y0JCjkIaBLuOiVILQYkxYrV8XYzRaqjjNdk0D
YSo=
=GT+2
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme into block-6.3
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.3
- avoid potential UAF in nvmet_req_complete (Damien Le Moal)
- more quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
- fix a memory leak in the nvme-pci probe teardown path (Irvin Cote)
- repair the MAINTAINERS entry (Lukas Bulwahn)
- fix handling single range discard request (Ming Lei)
- show more opcode names in trace events (Minwoo Im)
- fix nvme-tcp timeout reporting (Sagi Grimberg)"
* tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme:
nvmet: avoid potential UAF in nvmet_req_complete()
nvme-trace: show more opcode names
nvme-tcp: add nvme-tcp pdu size build protection
nvme-tcp: fix opcode reporting in the timeout handler
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
nvme-pci: fixing memory leak in probe teardown path
nvme: fix handling single range discard request
MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
While using iostat for raid, I observed very strange 'await'
occasionally, and turns out it's due to that 'ios' and 'sectors' is
counted in bdev_start_io_acct(), while 'nsecs' is counted in
bdev_end_io_acct(). I'm not sure why they are ccounted like that
but I think this behaviour is obviously wrong because user will get
wrong disk stats.
Fix the problem by counting 'ios' and 'sectors' when io is done, like
what rq-based device does.
Fixes: 394ffa503b ("blk: introduce generic io stat accounting help function")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230223091226.1135678-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An nvme target ->queue_response() operation implementation may free the
request passed as argument. Such implementation potentially could result
in a use after free of the request pointer when percpu_ref_put() is
called in nvmet_req_complete().
Avoid such problem by using a local variable to save the sq pointer
before calling __nvmet_req_complete(), thus avoiding dereferencing the
req pointer after that function call.
Fixes: a07b4970f4 ("nvmet: add a generic NVMe target")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Make sure that we don't somehow mess up the wire structures in the spec.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kkch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For non in-capsule writes we reuse the request pdu space for a h2cdata
pdu in order to avoid over allocating space (either preallocate or
dynamically upon receving an r2t pdu). However if the request times out
the core expects to find the opcode in the start of the request, which
we override.
In order to prevent that, without sacrificing additional 24 bytes per
request, we just use the tail of the command pdu space instead (last
24 bytes from the 72 bytes command pdu). That should make the command
opcode always available, and we get away from allocating more space.
If in the future we would need the last 24 bytes of the nvme command
available we would need to allocate a dedicated space for it in the
request, but until then we can avoid doing so.
Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kkch@nvidia.com>
Tested-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In case the nvme_probe teardown path is triggered the ctrl ref count does
not reach 0 thus creating a memory leak upon failure of nvme_probe.
Signed-off-by: Irvin Cote <irvincoteg@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When investigating one customer report on warning in nvme_setup_discard,
we observed the controller(nvme/tcp) actually exposes
queue_max_discard_segments(req->q) == 1.
Obviously the current code can't handle this situation, since contiguity
merge like normal RW request is taken.
Fix the issue by building range from request sector/nr_sectors directly.
Fixes: b35ba01ea6 ("nvme: support ranged discard requests")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
