Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
This series consists of the usual driver updates (ufs, target, tcmu,
smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx). The major core
change is using a sbitmap instead of an atomic for queue tracking.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYInvqCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYh2AP0SgqqL
WYZRT2oiyBOKD28v+ceOSiXvgjPlqABwVMC0BAEAn29/wNCxyvzZ1k/b0iPJ4M+S
klkSxLzXKQLzJBgdK5w=
=p5B/
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, target, tcmu,
smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).
The major core change is using a sbitmap instead of an atomic for
queue tracking"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
scsi: target: tcm_fc: Fix a kernel-doc header
scsi: target: Shorten ALUA error messages
scsi: target: Fix two format specifiers
scsi: target: Compare explicitly with SAM_STAT_GOOD
scsi: sd: Introduce a new local variable in sd_check_events()
scsi: dc395x: Open-code status_byte(u8) calls
scsi: 53c700: Open-code status_byte(u8) calls
scsi: smartpqi: Remove unused functions
scsi: qla4xxx: Remove an unused function
scsi: myrs: Remove unused functions
scsi: myrb: Remove unused functions
scsi: mpt3sas: Fix two kernel-doc headers
scsi: fcoe: Suppress a compiler warning
scsi: libfc: Fix a format specifier
scsi: aacraid: Remove an unused function
scsi: core: Introduce enum scsi_disposition
scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
scsi: core: Rename scsi_softirq_done() into scsi_complete()
scsi: core: Remove an incorrect comment
scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
...
This libsas fix is for a problem that occurs when trying to change the
cache type of an ATA device and the libiscsi one is a regression fix
from this merge window.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYHuPRSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisha52AQCXc8n0
6VAjfc+8aCqjX2Hpw4YCGeW5RYoNj1WXhiDv/AD+L4FVBMdQ4DE9ukH12YW7YBRS
qP03aNSHLCl8wfVon8Q=
=Btn4
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fixes: the libsas fix is for a problem that occurs when trying to
change the cache type of an ATA device and the libiscsi one is a
regression fix from this merge window"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Reset num_scatter if libata marks qc as NODATA
scsi: iscsi: Fix iSCSI cls conn state
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using 'retval' to represent first a SCSI status and later
whether or not a disk change event occurred, introduce a new variable for
the latter purpose.
Link: https://lore.kernel.org/r/20210415220826.29438-17-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The dc395x driver is one of the two drivers that passes an u8 argument to
status_byte() instead of an s32 argument. Open-code status_byte() in
preparation of changing SCSI status values into a structure.
Link: https://lore.kernel.org/r/20210415220826.29438-16-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The 53c700 driver is one of the two drivers that passes an u8 argument to
status_byte() instead of an s32 argument. Open-code status_byte in
preparation of changing SCSI status values into a structure.
Link: https://lore.kernel.org/r/20210415220826.29438-15-bvanassche@acm.org
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This was detected by building the kernel with clang and W=1.
Link: https://lore.kernel.org/r/20210415220826.29438-14-bvanassche@acm.org
Cc: Don Brace <don.brace@microchip.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This was detected by building the kernel with clang and W=1.
Link: https://lore.kernel.org/r/20210415220826.29438-13-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This was detected by building the kernel with clang and W=1.
Link: https://lore.kernel.org/r/20210415220826.29438-12-bvanassche@acm.org
Cc: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This was detected by building the kernel with clang and W=1.
Link: https://lore.kernel.org/r/20210415220826.29438-11-bvanassche@acm.org
Cc: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following warnings:
drivers/scsi/mpt3sas/mpt3sas_base.c:5430: warning: Excess function parameter 'ct' description in '_base_allocate_pcie_sgl_pool'
drivers/scsi/mpt3sas/mpt3sas_base.c:5493: warning: Excess function parameter 'ctr' description in '_base_allocate_chain_dma_pool'
Link: https://lore.kernel.org/r/20210415220826.29438-10-bvanassche@acm.org
Fixes: d6adc251dd ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region")
Fixes: 7dd847dae1 ("scsi: mpt3sas: Force chain buffer allocations to be within same 4 GB region")
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suppress the following compiler warning:
warning: cast to smaller integer type
'enum fip_mode' from 'void *' [-Wvoid-pointer-to-enum-cast]
enum fip_mode fip_mode = (enum fip_mode)kp->arg;
^~~~~~~~~~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/20210415220826.29438-9-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the 'mfs' member has been declared as 'u32' in include/scsi/libfc.h,
use the %u format specifier instead of %hu. This patch fixes the following
clang compiler warning:
warning: format specifies type
'unsigned short' but the argument has type 'u32' (aka 'unsigned int')
[-Wformat]
"lport->mfs:%hu\n", mfs, lport->mfs);
~~~ ^~~~~~~~~~
%u
Link: https://lore.kernel.org/r/20210415220826.29438-8-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Improve readability of the code in the SCSI core by introducing an
enumeration type for the values used internally that decide how to continue
processing a SCSI command. The eh_*_handler return values have not been
changed because that would involve modifying all SCSI drivers.
The output of the following command has been inspected to verify that no
out-of-range values are assigned to a variable of type enum
scsi_disposition:
KCFLAGS=-Wassign-enum make CC=clang W=1 drivers/scsi/
Link: https://lore.kernel.org/r/20210415220826.29438-6-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The comment above scsi_send_eh_cmnd() says: "Returns SUCCESS or FAILED or
NEEDS_RETRY". This patch makes all values returned by scsi_send_eh_cmnd()
match the documentation of this function. This change does not affect the
behavior of scsi_eh_tur() nor of scsi_eh_try_stu() nor of the
scsi_request_sense() callers.
See also commit bbe9fb0d04 ("scsi: Avoid that .queuecommand() gets called
for a blocked SCSI device"; v5.3).
Link: https://lore.kernel.org/r/20210415220826.29438-5-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 320ae51fee ("blk-mq: new multi-queue block IO queueing mechanism";
v3.13) introduced a code path that calls the blk-mq completion function
from interrupt context. scsi-mq was introduced by commit d285203cf6
("scsi: add support for a blk-mq based I/O path."; v3.17).
Since the introduction of scsi-mq, scsi_softirq_done() can be called from
interrupt context. That made the name of the function misleading, rename it
to scsi_complete().
Link: https://lore.kernel.org/r/20210415220826.29438-4-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current scsi_alloc_sgtables() documentation does not accurately explain
what this function does. Hence improve the documentation of this function.
Link: https://lore.kernel.org/r/20210415220826.29438-2-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce spin lock for outbound queue. With this, driver need not acquire
HBA global lock for outbound queue processing.
Link: https://lore.kernel.org/r/20210415103352.3580-9-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Producer index(PI) outbound queue and consumer index(CI) for Outbound queue
are in DMA memory. During resume(), the stale PI and CI Values will lead to
unexpected behavior. These values should be reset to 0 during driver
reinitialization.
Link: https://lore.kernel.org/r/20210415103352.3580-8-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When controller runs into fatal error, I/Os get stuck with no response,
handler event is defined to complete the pending I/Os (SAS task and
internal task) and also perform the cleanup for the drives.
Link: https://lore.kernel.org/r/20210415103352.3580-7-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A new sysfs variable 'ctl_iop1_count' is being introduced that tells if
the controller is alive by indicating controller ticks. If on subsequent
run we see the ticks changing that indicates that controller is not
dead.
Using the 'ctl_iop1_count' sysfs variable we can see ticks incrementing:
linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_iop1_count
0x00000069
0x0000006b
0x0000006d
0x00000072
Link: https://lore.kernel.org/r/20210415103352.3580-6-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A new sysfs variable 'ctl_iop0_count' is being introduced that tells if
the controller is alive by indicating controller ticks. If on subsequent
run we see the ticks changing that indicates that controller is not
dead.
Using the 'ctl_iop0_count' sysfs variable we can see ticks incrementing:
linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_iop0_count
0x000000a3
0x000001db
0x000001e4
0x000001e7
Link: https://lore.kernel.org/r/20210415103352.3580-5-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A new sysfs variable 'ctl_raae_count' is being introduced that tells if the
controller is alive by indicating controller ticks. If on subsequent run we
see the ticks changing in RAAE count that indicates that controller is not
dead.
Using the 'ctl_raae_count' sysfs variable we can see ticks incrementing:
linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_raae_count
0x00002245
0x00002253
0x0000225e
Link: https://lore.kernel.org/r/20210415103352.3580-4-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A new sysfs variable 'ctl_hmi_error' is being introduced to give the error
details if the MPI initialization fails
Using the 'ctl_hmi_error' sysfs variable we can check the error details:
linux-2dq0:~# cat /sys/class/scsi_host/host*/ctl_hmi_error
0x00000000
0x00000000
0x00000000
Link: https://lore.kernel.org/r/20210415103352.3580-3-Viswas.G@microchip.com
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A new sysfs variable 'ctl_mpi_state' is being introduced to check the state
of MPI.
Using the 'ctl_mpi_state' sysfs variable we can check the MPI state:
linux-2dq0:~# cat /sys/class/scsi_host/host*/ctl_mpi_state
MPI is successfully initialized
Link: https://lore.kernel.org/r/20210415103352.3580-2-Viswas.G@microchip.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit a6dcfe0848 ("scsi: qla2xxx: Limit interrupt vectors to number of
CPUs") lowers the number of allocated MSI-X vectors to the number of CPUs.
That breaks vector allocation assumptions in qla83xx_iospace_config(),
qla24xx_enable_msix() and qla2x00_iospace_config(). Either of the functions
computes maximum number of qpairs as:
ha->max_qpairs = ha->msix_count - 1 (MB interrupt) - 1 (default
response queue) - 1 (ATIO, in dual or pure target mode)
max_qpairs is set to zero in case of two CPUs and initiator mode. The
number is then used to allocate ha->queue_pair_map inside
qla2x00_alloc_queues(). No allocation happens and ha->queue_pair_map is
left NULL but the driver thinks there are queue pairs available.
qla2xxx_queuecommand() tries to find a qpair in the map and crashes:
if (ha->mqenable) {
uint32_t tag;
uint16_t hwq;
struct qla_qpair *qpair = NULL;
tag = blk_mq_unique_tag(cmd->request);
hwq = blk_mq_unique_tag_to_hwq(tag);
qpair = ha->queue_pair_map[hwq]; # <- HERE
if (qpair)
return qla2xxx_mqueuecommand(host, cmd, qpair);
}
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 72 Comm: kworker/u4:3 Tainted: G W 5.10.0-rc1+ #25
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Workqueue: scsi_wq_7 fc_scsi_scan_rport [scsi_transport_fc]
RIP: 0010:qla2xxx_queuecommand+0x16b/0x3f0 [qla2xxx]
Call Trace:
scsi_queue_rq+0x58c/0xa60
blk_mq_dispatch_rq_list+0x2b7/0x6f0
? __sbitmap_get_word+0x2a/0x80
__blk_mq_sched_dispatch_requests+0xb8/0x170
blk_mq_sched_dispatch_requests+0x2b/0x50
__blk_mq_run_hw_queue+0x49/0xb0
__blk_mq_delay_run_hw_queue+0xfb/0x150
blk_mq_sched_insert_request+0xbe/0x110
blk_execute_rq+0x45/0x70
__scsi_execute+0x10e/0x250
scsi_probe_and_add_lun+0x228/0xda0
__scsi_scan_target+0xf4/0x620
? __pm_runtime_resume+0x4f/0x70
scsi_scan_target+0x100/0x110
fc_scsi_scan_rport+0xa1/0xb0 [scsi_transport_fc]
process_one_work+0x1ea/0x3b0
worker_thread+0x28/0x3b0
? process_one_work+0x3b0/0x3b0
kthread+0x112/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x22/0x30
The driver should allocate enough vectors to provide every CPU it's own HW
queue and still handle reserved (MB, RSP, ATIO) interrupts.
The change fixes the crash on dual core VM and prevents unbalanced QP
allocation where nr_hw_queues is two less than the number of CPUs.
Link: https://lore.kernel.org/r/20210412165740.39318-1-r.bolshakov@yadro.com
Fixes: a6dcfe0848 ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs")
Cc: Daniel Wagner <daniel.wagner@suse.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org # 5.11+
Reported-by: Aleksandr Volkov <a.y.volkov@yadro.com>
Reported-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter found a possible NULL pointer dereference issue in function
pqi_sas_port_add_rphy():
drivers/scsi/smartpqi/smartpqi_sas_transport.c:97
pqi_sas_port_add_rphy() warn: variable dereferenced before
check 'pqi_sas_port->device' (see line 95)
Correct issue by moving reference of pqi_sas_port->device after the check
for the device pointer being non-NULL.
Link: https://www.mail-archive.com/kbuild@lists.01.org/msg06329.html
Link: https://lore.kernel.org/r/161850493026.7302.10032784239320437353.stgit@brunhilda
Fixes: ec504b23df ("scsi: smartpqi: Add phy ID support for the physical drives")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter found a possible divide by 0 issue in the smartpqi driver in
functions pci_get_aio_common_raid_map_values() and pqi_calc_aio_r5_or_r6().
The variable rmd->blocks_per_row is used as a divisor and could be 0.
Using rmd->blocks_per_row as a divisor without checking
it for 0 first.
Correct these possible divide by 0 conditions by insuring that
rmd->blocks_per_row is not zero before usage. The check for non-0 was too
late to prevent a divide by 0 condition. Add in a comment to explain why
the check for non-zero is necessary. If the member is 0, return
PQI_RAID_BYPASS_INELIGIBLE before any division is performed.
Link: https://lore.kernel.org/linux-scsi/YG%2F5kWHHAr7w5dU5@mwanda/
Link: https://lore.kernel.org/r/161850492435.7302.392780350442938047.stgit@brunhilda
Fixes: 6702d2c40f ("scsi: smartpqi: Add support for RAID5 and RAID6 writes")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This fixes an issue hitting the BUG_ON() in ibmvfc_do_work(). When going
through a host action of IBMVFC_HOST_ACTION_RESET, we change the action to
IBMVFC_HOST_ACTION_TGT_DEL, then drop the host lock, and reset the CRQ,
which changes the host state to IBMVFC_NO_CRQ. If, prior to setting the
host state to IBMVFC_NO_CRQ, ibmvfc_init_host() is called, it can then end
up changing the host action to IBMVFC_HOST_ACTION_INIT. If we then change
the host state to IBMVFC_NO_CRQ, we will then hit the BUG_ON().
Make a couple of changes to avoid this. Leave the host action to be
IBMVFC_HOST_ACTION_RESET or IBMVFC_HOST_ACTION_REENABLE until after we drop
the host lock and reset or reenable the CRQ. Also harden the host state
machine to ensure we cannot leave the reset / reenable state until we've
finished processing the reset or reenable.
Link: https://lore.kernel.org/r/20210413001009.902400-1-tyreld@linux.ibm.com
Fixes: 73ee5d8672 ("[SCSI] ibmvfc: Fix soft lockup on resume")
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
[tyreld: added fixes tag]
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
[mkp: fix comment checkpatch warnings]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyrights to 2021 for files modified in the 12.8.0.9 patch set.
Link: https://lore.kernel.org/r/20210412013127.2387-17-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 12.8.0.9
Link: https://lore.kernel.org/r/20210412013127.2387-16-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During code inspection, several cases of creating a dynamic attribute names
in logs messages using a define was found. This is unnecessary.
Place the native symbol name in the log messages.
Link: https://lore.kernel.org/r/20210412013127.2387-15-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Code inspection showed lpfc was using three different pointer formats when
logging discovery object pointers.
Standardize the pointer format to x%px.
Note: %px use is limited to discovery objects in order to aid core
analysis.
Link: https://lore.kernel.org/r/20210412013127.2387-14-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Clean up minor issues spotted by tools and code review:
- Spelling Errors
- Spurious characters and errors in function headers
- nvme_info wqerr and err fields source data reversed
- Extraneous new line in log message 0466
- Spacing error in log message 0109
- Messages 0140 and 0141 have portname and nodename reversed
- Incorrect function labelling in comment
Link: https://lore.kernel.org/r/20210412013127.2387-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SLI-4 does not contain a PORT_CAPABILITIES mailbox command (only SLI-3
does, and SLI-3 doesn't use it), yet there are SLI-4 code paths that have
code to issue the command. The command will always fail.
Remove the code for the mailbox command and leave only the resulting
"failure path" logic.
Link: https://lore.kernel.org/r/20210412013127.2387-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The lpfc_hdw_queue attribute is to set the number of hardware queues to be
created on the adapter. Normally, the value is set to a default, which
allows the hw queue count to be sized dynamically based on adapter
capabilities, CPU/platform architecture, or CPU type. Currently, when
lpfc_hdw_queue is set to a specific value, is has no effect and the dynamic
sizing occurs.
The routine checking whether parameters are default or not ignores the
lpfc_hdw_queue setting and invokes the dynamic logic.
Fix the routine to additionally check the lpfc_hdw_queue attribute value
before using dynamic scaling. Additionally, SLI-3 supports only a small
number of queues with dedicated functions, thus it needs to be exempted
from the variable scaling and set to the expected values.
Link: https://lore.kernel.org/r/20210412013127.2387-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FDMI registration needs to be performed after every login with the FC Mgmt
service. The flag the driver is using to track registration is cleared on
link up, but never on Mgmt service logout/re-login.
Fix by clearing the flag whenever a new login is completed with the FC Mgmt
service.
While perusing the flag use, logging was performed as if FDMI registration
occurred on vports. However, it is limited to the physical port only.
Revise the logging to reflect physical port based.
Link: https://lore.kernel.org/r/20210412013127.2387-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the unlikely case of a failure to allocate an LPFC_MBOXQ_t structure, no
return status is set, thus the routine never logs an error and returns
success to the callee.
Fix by setting a return code on failure.
Link: https://lore.kernel.org/r/20210412013127.2387-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During target port swap, the swap logic ignores the DROPPED flag in the
nodes. As a node then moves into the UNUSED state, the reference count will
be dropped. If a node is later reused and moved out of the UNUSED state, an
access can result in a use-after-free assert.
Fix by having the port swap logic propagate the DROPPED flag when switching
nodes. This will avoid reference from being dropped.
Link: https://lore.kernel.org/r/20210412013127.2387-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In SLI-4, when performing a mailbox command with MBX_POLL, the driver uses
the BMBX register to send the command rather than the MQ. A flag is set
indicating the BMBX register is active and saves the mailbox job struct
(mboxq) in the mbox_active element of the adapter. The routine then waits
for completion or timeout. The mailbox job struct is not freed by the
routine. In cases of timeout, the adapter will be reset. The
lpfc_sli_mbox_sys_flush() routine will clean up the mbox in preparation for
the reset. It clears the BMBX active flag and marks the job structure as
MBX_NOT_FINISHED. But, it never frees the mboxq job structure. Expectation
in both normal completion and timeout cases is that the issuer of the mbx
command will free the structure. Unfortunately, not all calling paths are
freeing the memory in cases of error.
All calling paths were looked at and updated, if missing, to free the mboxq
memory regardless of completion status.
Link: https://lore.kernel.org/r/20210412013127.2387-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During target port-swap testing with link flips, the initiator could
encounter PRLI errors. If the target node disappears permanently, the ndlp
is found stuck in UNUSED state with ref count of 1. The rmmod of the driver
will hang waiting for this node to be freed.
While handling a link error in PRLI completion path, the code intends to
skip triggering the discovery state machine. However this is causing the
final reference release path to be skipped. This causes the node to be
stuck with ref count of 1
Fix by ensuring the code path triggers the device removal event on the node
state machine.
Link: https://lore.kernel.org/r/20210412013127.2387-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove hbalock dependency for lpfc_abts_els_sgl_list and
lpfc_abts_nvmet_ctx_list. The lists are adaquately synchronized with the
sgl_list_lock and abts_nvmet_buf_list_lock.
Link: https://lore.kernel.org/r/20210412013127.2387-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Call traces are being seen that result from a nodelist structure ref
counting error. They are typically seen after transmission of an LS_RJT ELS
response.
Aged code in lpfc_cmpl_els_rsp() calls lpfc_nlp_not_used() which, if the
ndlp reference count is exactly 1, will decrement the reference count.
Previously lpfc_nlp_put() was within lpfc_els_free_iocb(), and the 'put'
within the free would only be invoked if cmdiocb->context1 was not NULL.
Since the nodelist structure reference count is decremented when exiting
lpfc_cmpl_els_rsp() the lpfc_nlp_not_used() calls are no longer required.
Calling them is causing the reference count issue.
Fix by removing the lpfc_nlp_not_used() calls.
Link: https://lore.kernel.org/r/20210412013127.2387-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix a crash caused by a double put on the node when the driver completed an
ACC for an unsolicted abort on the same node. The second put was executed
by lpfc_nlp_not_used() and is wrong because the completion routine executes
the nlp_put when the iocbq was released. Additionally, the driver is
issuing a LOGO then immediately calls lpfc_nlp_set_state to put the node
into NPR. This call does nothing.
Remove the lpfc_nlp_not_used call and additional set_state in the
completion routine. Remove the lpfc_nlp_set_state post issue_logo. Isn't
necessary.
Link: https://lore.kernel.org/r/20210412013127.2387-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rmmod on SLI-4 adapters is sometimes hitting a bad ptr dereference in
lpfc_els_free_iocb().
A prior patch refactored the lpfc_sli_abort_iocb() routine. One of the
changes was to convert from building/sending an abort within the routine to
using a common routine. The reworked routine passes, without modification,
the pring ptr to the new common routine. The older routine had logic to
check SLI-3 vs SLI-4 and adapt the pring ptr if necessary as callers were
passing SLI-3 pointers even when not on an SLI-4 adapter. The new routine
is missing this check and adapt, so the SLI-3 ring pointers are being used
in SLI-4 paths.
Fix by cleaning up the calling routines. In review, there is no need to
pass the ring ptr argument to abort_iocb at all. The routine can look at
the adapter type itself and reference the proper ring.
Link: https://lore.kernel.org/r/20210412013127.2387-2-jsmart2021@gmail.com
Fixes: db7531d2b3 ("scsi: lpfc: Convert abort handling to SLI-3 and SLI-4 handlers")
Cc: <stable@vger.kernel.org> # v5.11+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct sci_phy_proto was already defined on line 142. The declaration here
is unnecessary. Remove it.
Link: https://lore.kernel.org/r/20210406105913.676746-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Eliminate the following coccicheck warning:
drivers/scsi/qla4xxx/ql4_os.c:4175:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:4196:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:4215:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:6400:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:6402:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:6555:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:6557:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:7838:2-7: WARNING:
NULL check before some freeing functions is not needed.
drivers/scsi/qla4xxx/ql4_os.c:7840:2-7: WARNING:
NULL check before some freeing functions is not needed.
Link: https://lore.kernel.org/r/20210409120345.6447-1-linqiheng@huawei.com
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
