Commit graph

1024 commits

Author SHA1 Message Date
Vasily Averin
6126891c6d memcg: enable accounting for IP address and routing-related objects
An netadmin inside container can use 'ip a a' and 'ip r a'
to assign a large number of ipv4/ipv6 addresses and routing entries
and force kernel to allocate megabytes of unaccounted memory
for long-lived per-netdevice related kernel objects:
'struct in_ifaddr', 'struct inet6_ifaddr', 'struct fib6_node',
'struct rt6_info', 'struct fib_rules' and ip_fib caches.

These objects can be manually removed, though usually they lives
in memory till destroy of its net namespace.

It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.

One of such objects is the 'struct fib6_node' mostly allocated in
net/ipv6/route.c::__ip6_ins_rt() inside the lock_bh()/unlock_bh() section:

 write_lock_bh(&table->tb6_lock);
 err = fib6_add(&table->tb6_root, rt, info, mxc);
 write_unlock_bh(&table->tb6_lock);

In this case it is not enough to simply add SLAB_ACCOUNT to corresponding
kmem cache. The proper memory cgroup still cannot be found due to the
incorrect 'in_interrupt()' check used in memcg_kmem_bypass().

Obsoleted in_interrupt() does not describe real execution context properly.
>From include/linux/preempt.h:

 The following macros are deprecated and should not be used in new code:
 in_interrupt()	- We're in NMI,IRQ,SoftIRQ context or have BH disabled

To verify the current execution context new macro should be used instead:
 in_task()	- We're in task context

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 06:00:38 -07:00
David S. Miller
126285651b Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net
Bug fixes overlapping feature additions and refactoring, mostly.

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07 13:01:52 -07:00
Coco Li
821bbf79fe ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions
Reported by syzbot:
HEAD commit:    90c911ad Merge tag 'fixes' of git://git.kernel.org/pub/scm..
git tree:       git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
dashboard link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7
compiler:       Debian clang version 11.0.1-2

==================================================================
BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline]
BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732
Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760

CPU: 0 PID: 17760 Comm: syz-executor.4 Not tainted 5.12.0-rc8-syzkaller #0
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x202/0x31e lib/dump_stack.c:120
 print_address_description+0x5f/0x3b0 mm/kasan/report.c:232
 __kasan_report mm/kasan/report.c:399 [inline]
 kasan_report+0x15c/0x200 mm/kasan/report.c:416
 fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline]
 fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732
 fib6_nh_release+0x9a/0x430 net/ipv6/route.c:3536
 fib6_info_destroy_rcu+0xcb/0x1c0 net/ipv6/ip6_fib.c:174
 rcu_do_batch kernel/rcu/tree.c:2559 [inline]
 rcu_core+0x8f6/0x1450 kernel/rcu/tree.c:2794
 __do_softirq+0x372/0x7a6 kernel/softirq.c:345
 invoke_softirq kernel/softirq.c:221 [inline]
 __irq_exit_rcu+0x22c/0x260 kernel/softirq.c:422
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:434
 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1100
 </IRQ>
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632
RIP: 0010:lock_acquire+0x1f6/0x720 kernel/locking/lockdep.c:5515
Code: f6 84 24 a1 00 00 00 02 0f 85 8d 02 00 00 f7 c3 00 02 00 00 49 bd 00 00 00 00 00 fc ff df 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 3d 00 00 00 00 00 4b c7 44 3d 09 00 00 00 00 43 c7 44 3d
RSP: 0018:ffffc90009e06560 EFLAGS: 00000206
RAX: 1ffff920013c0cc0 RBX: 0000000000000246 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc90009e066e0 R08: dffffc0000000000 R09: fffffbfff1f992b1
R10: fffffbfff1f992b1 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000000 R15: 1ffff920013c0cb4
 rcu_lock_acquire+0x2a/0x30 include/linux/rcupdate.h:267
 rcu_read_lock include/linux/rcupdate.h:656 [inline]
 ext4_get_group_info+0xea/0x340 fs/ext4/ext4.h:3231
 ext4_mb_prefetch+0x123/0x5d0 fs/ext4/mballoc.c:2212
 ext4_mb_regular_allocator+0x8a5/0x28f0 fs/ext4/mballoc.c:2379
 ext4_mb_new_blocks+0xc6e/0x24f0 fs/ext4/mballoc.c:4982
 ext4_ext_map_blocks+0x2be3/0x7210 fs/ext4/extents.c:4238
 ext4_map_blocks+0xab3/0x1cb0 fs/ext4/inode.c:638
 ext4_getblk+0x187/0x6c0 fs/ext4/inode.c:848
 ext4_bread+0x2a/0x1c0 fs/ext4/inode.c:900
 ext4_append+0x1a4/0x360 fs/ext4/namei.c:67
 ext4_init_new_dir+0x337/0xa10 fs/ext4/namei.c:2768
 ext4_mkdir+0x4b8/0xc00 fs/ext4/namei.c:2814
 vfs_mkdir+0x45b/0x640 fs/namei.c:3819
 ovl_do_mkdir fs/overlayfs/overlayfs.h:161 [inline]
 ovl_mkdir_real+0x53/0x1a0 fs/overlayfs/dir.c:146
 ovl_create_real+0x280/0x490 fs/overlayfs/dir.c:193
 ovl_workdir_create+0x425/0x600 fs/overlayfs/super.c:788
 ovl_make_workdir+0xed/0x1140 fs/overlayfs/super.c:1355
 ovl_get_workdir fs/overlayfs/super.c:1492 [inline]
 ovl_fill_super+0x39ee/0x5370 fs/overlayfs/super.c:2035
 mount_nodev+0x52/0xe0 fs/super.c:1413
 legacy_get_tree+0xea/0x180 fs/fs_context.c:592
 vfs_get_tree+0x86/0x270 fs/super.c:1497
 do_new_mount fs/namespace.c:2903 [inline]
 path_mount+0x196f/0x2be0 fs/namespace.c:3233
 do_mount fs/namespace.c:3246 [inline]
 __do_sys_mount fs/namespace.c:3454 [inline]
 __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3431
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f68f2b87188 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 000000000056bf60 RCX: 00000000004665f9
RDX: 00000000200000c0 RSI: 0000000020000000 RDI: 000000000040000a
RBP: 00000000004bfbb9 R08: 0000000020000100 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056bf60
R13: 00007ffe19002dff R14: 00007f68f2b87300 R15: 0000000000022000

Allocated by task 17768:
 kasan_save_stack mm/kasan/common.c:38 [inline]
 kasan_set_track mm/kasan/common.c:46 [inline]
 set_alloc_info mm/kasan/common.c:427 [inline]
 ____kasan_kmalloc+0xc2/0xf0 mm/kasan/common.c:506
 kasan_kmalloc include/linux/kasan.h:233 [inline]
 __kmalloc+0xb4/0x380 mm/slub.c:4055
 kmalloc include/linux/slab.h:559 [inline]
 kzalloc include/linux/slab.h:684 [inline]
 fib6_info_alloc+0x2c/0xd0 net/ipv6/ip6_fib.c:154
 ip6_route_info_create+0x55d/0x1a10 net/ipv6/route.c:3638
 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728
 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352
 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553
 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350
 ___sys_sendmsg net/socket.c:2404 [inline]
 __sys_sendmsg+0x319/0x400 net/socket.c:2433
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Last potentially related work creation:
 kasan_save_stack+0x27/0x50 mm/kasan/common.c:38
 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345
 __call_rcu kernel/rcu/tree.c:3039 [inline]
 call_rcu+0x1b1/0xa30 kernel/rcu/tree.c:3114
 fib6_info_release include/net/ip6_fib.h:337 [inline]
 ip6_route_info_create+0x10c4/0x1a10 net/ipv6/route.c:3718
 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728
 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352
 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553
 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350
 ___sys_sendmsg net/socket.c:2404 [inline]
 __sys_sendmsg+0x319/0x400 net/socket.c:2433
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Second to last potentially related work creation:
 kasan_save_stack+0x27/0x50 mm/kasan/common.c:38
 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345
 insert_work+0x54/0x400 kernel/workqueue.c:1331
 __queue_work+0x981/0xcc0 kernel/workqueue.c:1497
 queue_work_on+0x111/0x200 kernel/workqueue.c:1524
 queue_work include/linux/workqueue.h:507 [inline]
 call_usermodehelper_exec+0x283/0x470 kernel/umh.c:433
 kobject_uevent_env+0x1349/0x1730 lib/kobject_uevent.c:617
 kvm_uevent_notify_change+0x309/0x3b0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4809
 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:877 [inline]
 kvm_put_kvm+0x9c/0xd10 arch/x86/kvm/../../../virt/kvm/kvm_main.c:920
 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3120
 __fput+0x352/0x7b0 fs/file_table.c:280
 task_work_run+0x146/0x1c0 kernel/task_work.c:140
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:174 [inline]
 exit_to_user_mode_prepare+0x10b/0x1e0 kernel/entry/common.c:208
 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline]
 syscall_exit_to_user_mode+0x26/0x70 kernel/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff8880145c7800
 which belongs to the cache kmalloc-192 of size 192
The buggy address is located 56 bytes to the right of
 192-byte region [ffff8880145c7800, ffff8880145c78c0)
The buggy address belongs to the page:
page:ffffea00005171c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x145c7
flags: 0xfff00000000200(slab)
raw: 00fff00000000200 ffffea00006474c0 0000000200000002 ffff888010c41a00
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880145c7780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8880145c7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880145c7880: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
                                                                ^
 ffff8880145c7900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880145c7980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
==================================================================

In the ip6_route_info_create function, in the case that the nh pointer
is not NULL, the fib6_nh in fib6_info has not been allocated.
Therefore, when trying to free fib6_info in this error case using
fib6_info_release, the function will call fib6_info_destroy_rcu,
which it will access fib6_nh_release(f6i->fib6_nh);
However, f6i->fib6_nh doesn't have any refcount yet given the lack of allocation
causing the reported memory issue above.
Therefore, releasing the empty pointer directly instead would be the solution.

Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Fixes: 706ec91916 ("ipv6: Fix nexthop refcnt leak when creating ipv6 route info")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03 15:19:49 -07:00
Ido Schimmel
73c2c5cbb1 ipv6: Add custom multipath hash policy
Add a new multipath hash policy where the packet fields used for hash
calculation are determined by user space via the
fib_multipath_hash_fields sysctl that was introduced in the previous
patch.

The current set of available packet fields includes both outer and inner
fields, which requires two invocations of the flow dissector. Avoid
unnecessary dissection of the outer or inner flows by skipping
dissection if none of the outer or inner fields are required.

In accordance with the existing policies, when an skb is not available,
packet fields are extracted from the provided flow key. In which case,
only outer fields are considered.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18 13:27:32 -07:00
Ido Schimmel
b95b6e072a ipv6: Calculate multipath hash inside switch statement
A subsequent patch will add another multipath hash policy where the
multipath hash is calculated directly by the policy specific code and
not outside of the switch statement.

Prepare for this change by moving the multipath hash calculation inside
the switch statement.

No functional changes intended.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18 13:27:32 -07:00
Jakub Kicinski
8859a44ea0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts:

MAINTAINERS
 - keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
 - simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
 - trivial
include/linux/ethtool.h
 - trivial, fix kdoc while at it
include/linux/skmsg.h
 - move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
 - add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
 - trivial

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-09 20:48:35 -07:00
Muhammad Usama Anjum
864db232dc net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
nlh is being checked for validtity two times when it is dereferenced in
this function. Check for validity again when updating the flags through
nlh pointer to make the dereferencing safe.

CC: <stable@vger.kernel.org>
Addresses-Coverity: ("NULL pointer dereference")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08 16:41:46 -07:00
Xu Jia
b7a320c3a1 net: ipv6: Refactor in rt6_age_examine_exception
The logic in rt6_age_examine_exception is confusing. The commit is
to refactor the code.

Signed-off-by: Xu Jia <xujia39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-01 15:45:26 -07:00
Bhaskar Chowdhury
89e8347f0f ipv6: route.c: A spello fix
s/notfication/notification/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-28 17:31:13 -07:00
David S. Miller
efd13b71a3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25 15:31:22 -07:00
Shubhankar Kuranagatti
13fdb9403d net: ipv6: route.c:fix indentation
The series of space has been replaced by tab space
wherever required.

Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10 12:45:16 -08:00
Daniel Borkmann
c4c877b273 net: Consolidate common blackhole dst ops
Move generic blackhole dst ops to the core and use them from both
ipv4_dst_blackhole_ops and ip6_dst_blackhole_ops where possible. No
functional change otherwise. We need these also in other locations
and having to define them over and over again is not great.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10 12:24:18 -08:00
Amit Cohen
6fad361ae9 IPv6: Extend 'fib_notify_on_flag_change' sysctl
Add the value '2' to 'fib_notify_on_flag_change' to allow sending
notifications only for failed route installation.

Separate value is added for such notifications because there are less of
them, so they do not impact performance and some users will find them more
important.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08 16:47:03 -08:00
Amit Cohen
0c5fcf9e24 IPv6: Add "offload failed" indication to routes
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel, but not
necessarily in hardware.

The asynchronous nature of route installation in hardware can lead to a
routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.

To avoid such cases, previous patch set added the ability to emit
RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed, this behavior is controlled by sysctl.

With the above mentioned behavior, it is possible to know from user-space
if the route was offloaded, but if the offload fails there is no indication
to user-space. Following a failure, a routing daemon will wait indefinitely
for a notification that will never come.

This patch adds an "offload_failed" indication to IPv6 routes, so that
users will have better visibility into the offload process.

'struct fib6_info' is extended with new field that indicates if route
offload failed. Note that the new field is added using unused bit and
therefore there is no need to increase struct size.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08 16:47:03 -08:00
Brian Vazquez
9c97921a51 net: fix building errors on powerpc when CONFIG_RETPOLINE is not set
This commit fixes the errores reported when building for powerpc:

 ERROR: modpost: "ip6_dst_check" [vmlinux] is a static EXPORT_SYMBOL
 ERROR: modpost: "ipv4_dst_check" [vmlinux] is a static EXPORT_SYMBOL
 ERROR: modpost: "ipv4_mtu" [vmlinux] is a static EXPORT_SYMBOL
 ERROR: modpost: "ip6_mtu" [vmlinux] is a static EXPORT_SYMBOL

Fixes: f67fbeaebd ("net: use indirect call helpers for dst_mtu")
Fixes: bbd807dfbf ("net: indirect call helpers for ipv4/ipv6 dst_check functions")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/r/20210204181839.558951-2-brianvv@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04 18:06:27 -08:00
Brian Vazquez
bbd807dfbf net: indirect call helpers for ipv4/ipv6 dst_check functions
This patch avoids the indirect call for the common case:
ip6_dst_check and ipv4_dst_check

Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03 14:51:40 -08:00
Brian Vazquez
f67fbeaebd net: use indirect call helpers for dst_mtu
This patch avoids the indirect call for the common case:
ip6_mtu and ipv4_mtu

Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03 14:51:39 -08:00
Amit Cohen
907eea4868 net: ipv6: Emit notification when fib hardware flags are changed
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel,
but not necessarily in hardware.

The asynchronous nature of route installation in hardware can lead
to a routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.

It is also possible for a route already installed in hardware to change
its action and therefore its flags. For example, a host route that is
trapping packets can be "promoted" to perform decapsulation following
the installation of an IPinIP/VXLAN tunnel.

Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed. The aim is to provide an indication to user-space
(e.g., routing daemons) about the state of the route in hardware.

Introduce a sysctl that controls this behavior.

Keep the default value at 0 (i.e., do not emit notifications) for several
reasons:
- Multiple RTM_NEWROUTE notification per-route might confuse existing
  routing daemons.
- Convergence reasons in routing daemons.
- The extra notifications will negatively impact the insertion rate.
- Not all users are interested in these notifications.

Move fib6_info_hw_flags_set() to C file because it is no longer a short
function.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 17:45:59 -08:00
Praveen Chaudhary
6b2e04bc24 net: allow user to set metric on default route learned via Router Advertisement
For IPv4, default route is learned via DHCPv4 and user is allowed to change
metric using config etc/network/interfaces. But for IPv6, default route can
be learned via RA, for which, currently a fixed metric value 1024 is used.

Ideally, user should be able to configure metric on default route for IPv6
similar to IPv4. This patch adds sysctl for the same.

Logs:

For IPv4:

Config in etc/network/interfaces:
auto eth0
iface eth0 inet dhcp
    metric 4261413864

IPv4 Kernel Route Table:
$ ip route list
default via 172.21.47.1 dev eth0 metric 4261413864

FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over DHCPv4 default route.]
Codes: K - kernel route, C - connected, S - static, R - RIP,
       O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
       T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
       > - selected route, * - FIB route

S>* 0.0.0.0/0 [20/0] is directly connected, eth0, 00:00:03
K   0.0.0.0/0 [254/1000] via 172.21.47.1, eth0, 6d08h51m

i.e. User can prefer Default Router learned via Routing Protocol in IPv4.
Similar behavior is not possible for IPv6, without this fix.

After fix [for IPv6]:
sudo sysctl -w net.ipv6.conf.eth0.net.ipv6.conf.eth0.ra_defrtr_metric=1996489705

IP monitor: [When IPv6 RA is received]
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705  pref high

Kernel IPv6 routing table
$ ip -6 route list
default via fe80::be16:65ff:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 21sec hoplimit 64 pref high

FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over IPv6 RA default route.]
Codes: K - kernel route, C - connected, S - static, R - RIPng,
       O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table,
       v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
       > - selected route, * - FIB route

S>* ::/0 [20/0] is directly connected, eth0, 00:00:06
K   ::/0 [119/1001] via fe80::xx16:xxxx:feb3:ce8e, eth0, 6d07h43m

If the metric is changed later, the effect will be seen only when next IPv6
RA is received, because the default route must be fully controlled by RA msg.
Below metric is changed from 1996489705 to 1996489704.

$ sudo sysctl -w net.ipv6.conf.eth0.ra_defrtr_metric=1996489704
net.ipv6.conf.eth0.ra_defrtr_metric = 1996489704

IP monitor:
[On next IPv6 RA msg, Kernel deletes prev route and installs new route with updated metric]

Deleted default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 3sec hoplimit 64 pref high
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489704 pref high

Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210125214430.24079-1-pchaudhary@linkedin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26 18:39:45 -08:00
Oliver Herms
6b13d8f71f IPv6: RTM_GETROUTE: Add RTA_ENCAP to result
This patch adds an IPv6 routes encapsulation attribute
to the result of netlink RTM_GETROUTE requests
(i.e. ip route get 2001:db8::).

Signed-off-by: Oliver Herms <oliver.peter.herms@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201118230651.GA8861@tws
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19 21:56:20 -08:00
Ido Schimmel
bbea126c2b nexthop: Remove in-kernel route notifications when nexthop changes
Remove in-kernel route notifications when the configuration of their
nexthop changes.

These notifications are unnecessary because the route still uses the
same nexthop ID. A separate notification for the nexthop change itself
is now sent in the nexthop notification chain.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06 11:28:50 -08:00
Jakub Kicinski
2295cddf99 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor conflicts in net/mptcp/protocol.h and
tools/testing/selftests/net/Makefile.

In both cases code was added on both sides in the same place
so just keep both.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15 12:43:21 -07:00
Georg Kohmann
4a65dff81a net: ipv6: Discard next-hop MTU less than minimum link MTU
When a ICMPV6_PKT_TOOBIG report a next-hop MTU that is less than the IPv6
minimum link MTU, the estimated path MTU is reduced to the minimum link
MTU. This behaviour breaks TAHI IPv6 Core Conformance Test v6LC4.1.6:
Packet Too Big Less than IPv6 MTU.

Referring to RFC 8201 section 4: "If a node receives a Packet Too Big
message reporting a next-hop MTU that is less than the IPv6 minimum link
MTU, it must discard it. A node must not reduce its estimate of the Path
MTU below the IPv6 minimum link MTU on receipt of a Packet Too Big
message."

Drop the path MTU update if reported MTU is less than the minimum link MTU.

Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09 16:22:59 -07:00
David S. Miller
3ab0a7a0c3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Two minor conflicts:

1) net/ipv4/route.c, adding a new local variable while
   moving another local variable and removing it's
   initial assignment.

2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
   One pretty prints the port mode differently, whilst another
   changes the driver to try and obtain the port mode from
   the port node rather than the switch node.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22 16:45:34 -07:00
Xu Wang
91b2c9a0fd ipv6: route: convert comma to semicolon
Replace a comma between expression statements by a semicolon.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 14:52:18 -07:00
Colin Ian King
2291267e48 ipv6: remove redundant assignment to variable err
The variable err is being initialized with a value that is never read and
it is being updated later with a new value. The initialization is redundant
and can be removed.  Also re-order variable declarations in reverse
Christmas tree ordering.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11 14:48:25 -07:00
David S. Miller
2e7199bd77 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2020-08-04

The following pull-request contains BPF updates for your *net-next* tree.

We've added 73 non-merge commits during the last 9 day(s) which contain
a total of 135 files changed, 4603 insertions(+), 1013 deletions(-).

The main changes are:

1) Implement bpf_link support for XDP. Also add LINK_DETACH operation for the BPF
   syscall allowing processes with BPF link FD to force-detach, from Andrii Nakryiko.

2) Add BPF iterator for map elements and to iterate all BPF programs for efficient
   in-kernel inspection, from Yonghong Song and Alexei Starovoitov.

3) Separate bpf_get_{stack,stackid}() helpers for perf events in BPF to avoid
   unwinder errors, from Song Liu.

4) Allow cgroup local storage map to be shared between programs on the same
   cgroup. Also extend BPF selftests with coverage, from YiFei Zhu.

5) Add BPF exception tables to ARM64 JIT in order to be able to JIT BPF_PROBE_MEM
   load instructions, from Jean-Philippe Brucker.

6) Follow-up fixes on BPF socket lookup in combination with reuseport group
   handling. Also add related BPF selftests, from Jakub Sitnicki.

7) Allow to use socket storage in BPF_PROG_TYPE_CGROUP_SOCK-typed programs for
   socket create/release as well as bind functions, from Stanislav Fomichev.

8) Fix an info leak in xsk_getsockopt() when retrieving XDP stats via old struct
   xdp_statistics, from Peilin Ye.

9) Fix PT_REGS_RC{,_CORE}() macros in libbpf for MIPS arch, from Jerry Crunchtime.

10) Extend BPF kernel test infra with skb->family and skb->{local,remote}_ip{4,6}
    fields and allow user space to specify skb->dev via ifindex, from Dmitry Yakunin.

11) Fix a bpftool segfault due to missing program type name and make it more robust
    to prevent them in future gaps, from Quentin Monnet.

12) Consolidate cgroup helper functions across selftests and fix a v6 localhost
    resolver issue, from John Fastabend.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03 18:27:40 -07:00
David S. Miller
bd0b33b248 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Resolved kernel/bpf/btf.c using instructions from merge commit
69138b34a7

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-02 01:02:12 -07:00
Xiyu Yang
706ec91916 ipv6: Fix nexthop refcnt leak when creating ipv6 route info
ip6_route_info_create() invokes nexthop_get(), which increases the
refcount of the "nh".

When ip6_route_info_create() returns, local variable "nh" becomes
invalid, so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in one exception handling path of
ip6_route_info_create(). When nexthops can not be used with source
routing, the function forgets to decrease the refcnt increased by
nexthop_get(), causing a refcnt leak.

Fix this issue by pulling up the error source routing handling when
nexthops can not be used with source routing.

Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28 17:24:08 -07:00
Yonghong Song
14fc6bd6b7 bpf: Refactor bpf_iter_reg to have separate seq_info member
There is no functionality change for this patch.
Struct bpf_iter_reg is used to register a bpf_iter target,
which includes information for both prog_load, link_create
and seq_file creation.

This patch puts fields related seq_file creation into
a different structure. This will be useful for map
elements iterator where one iterator covers different
map types and different map types may have different
seq_ops, init/fini private_data function and
private_data size.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184109.590030-1-yhs@fb.com
2020-07-25 20:16:32 -07:00
Yonghong Song
951cf368bc bpf: net: Use precomputed btf_id for bpf iterators
One additional field btf_id is added to struct
bpf_ctx_arg_aux to store the precomputed btf_ids.
The btf_id is computed at build time with
BTF_ID_LIST or BTF_ID_LIST_GLOBAL macro definitions.
All existing bpf iterators are changed to used
pre-compute btf_ids.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720163403.1393551-1-yhs@fb.com
2020-07-21 13:26:26 -07:00
David S. Miller
71930d6102 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
All conflicts seemed rather trivial, with some guidance from
Saeed Mameed on the tc_ct.c one.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-11 00:46:00 -07:00
David Ahern
aea23c323d ipv6: Fix use of anycast address with loopback
Thomas reported a regression with IPv6 and anycast using the following
reproducer:

    echo 1 >  /proc/sys/net/ipv6/conf/all/forwarding
    ip -6 a add fc12::1/16 dev lo
    sleep 2
    echo "pinging lo"
    ping6 -c 2 fc12::

The conversion of addrconf_f6i_alloc to use ip6_route_info_create missed
the use of fib6_is_reject which checks addresses added to the loopback
interface and sets the REJECT flag as needed. Update fib6_is_reject for
loopback checks to handle RTF_ANYCAST addresses.

Fixes: c7a1ce397a ("ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create")
Reported-by: thomas.gambier@nexedi.com
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07 13:04:16 -07:00
David Ahern
34fe5a1cf9 ipv6: fib6_select_path can not use out path for nexthop objects
Brian reported a crash in IPv6 code when using rpfilter with a setup
running FRR and external nexthop objects. The root cause of the crash
is fib6_select_path setting fib6_nh in the result to NULL because of
an improper check for nexthop objects.

More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif
set causing fib6_select_path to be called with have_oif_match set.
fib6_select_path has early check on have_oif_match and jumps to the
out label which presumes a builtin fib6_nh. This path is invalid for
nexthop objects; for external nexthops fib6_select_path needs to just
return if the fib6_nh has already been set in the result otherwise it
returns after the call to nexthop_path_fib6_result. Update the check
on have_oif_match to not bail on external nexthops.

Update selftests for this problem.

Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Reported-by: Brian Rak <brak@choopa.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 13:24:16 -07:00
Brian Vazquez
55cced4f81 ipv6: fib6: avoid indirect calls from fib6_rule_lookup
It was reported that a considerable amount of cycles were spent on the
expensive indirect calls on fib6_rule_lookup. This patch introduces an
inline helper called pol_route_func that uses the indirect_call_wrappers
to avoid the indirect calls.

This patch saves around 50ns per call.

Performance was measured on the receiver by checking the amount of
syncookies that server was able to generate under a synflood load.

Traffic was generated using trafgen[1] which was pushing around 1Mpps on
a single queue. Receiver was using only one rx queue which help to
create a bottle neck and make the experiment rx-bounded.

These are the syncookies generated over 10s from the different runs:

Whithout the patch:
TcpExtSyncookiesSent            3553749            0.0
TcpExtSyncookiesSent            3550895            0.0
TcpExtSyncookiesSent            3553845            0.0
TcpExtSyncookiesSent            3541050            0.0
TcpExtSyncookiesSent            3539921            0.0
TcpExtSyncookiesSent            3557659            0.0
TcpExtSyncookiesSent            3526812            0.0
TcpExtSyncookiesSent            3536121            0.0
TcpExtSyncookiesSent            3529963            0.0
TcpExtSyncookiesSent            3536319            0.0

With the patch:
TcpExtSyncookiesSent            3611786            0.0
TcpExtSyncookiesSent            3596682            0.0
TcpExtSyncookiesSent            3606878            0.0
TcpExtSyncookiesSent            3599564            0.0
TcpExtSyncookiesSent            3601304            0.0
TcpExtSyncookiesSent            3609249            0.0
TcpExtSyncookiesSent            3617437            0.0
TcpExtSyncookiesSent            3608765            0.0
TcpExtSyncookiesSent            3620205            0.0
TcpExtSyncookiesSent            3601895            0.0

Without the patch the average is 354263 pkt/s or 2822 ns/pkt and with
the patch the average is 360738 pkt/s or 2772 ns/pkt which gives an
estimate of 50 ns per packet.

[1] http://netsniff-ng.org/

Changelog since v1:
 - Change ordering in the ICW (Paolo Abeni)

Cc: Luigi Rizzo <lrizzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23 15:11:19 -07:00
Roopa Prabhu
38428d6871 nexthop: support for fdb ecmp nexthops
This patch introduces ecmp nexthops and nexthop groups
for mac fdb entries. In subsequent patches this is used
by the vxlan driver fdb entries. The use case is
E-VPN multihoming [1,2,3] which requires bridged vxlan traffic
to be load balanced to remote switches (vteps) belonging to
the same multi-homed ethernet segment (This is analogous to
a multi-homed LAG but over vxlan).

Changes include new nexthop flag NHA_FDB for nexthops
referenced by fdb entries. These nexthops only have ip.
This patch includes appropriate checks to avoid routes
referencing such nexthops.

example:
$ip nexthop add id 12 via 172.16.1.2 fdb
$ip nexthop add id 13 via 172.16.1.3 fdb
$ip nexthop add id 102 group 12/13 fdb

$bridge fdb add 02:02:00:00:00:13 dev vxlan1000 nhid 101 self

[1] E-VPN https://tools.ietf.org/html/rfc7432
[2] E-VPN VxLAN: https://tools.ietf.org/html/rfc8365
[3] LPC talk with mention of nexthop groups for L2 ecmp
http://vger.kernel.org/lpc_net2018_talks/scaling_bridge_fdb_database_slidesV3.pdf

v4 - fixed uninitialized variable reported by kernel test robot
Reported-by: kernel test robot <rong.a.chen@intel.com>

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22 14:00:38 -07:00
Christoph Hellwig
7c1552da90 ipv6: lift copy_from_user out of ipv6_route_ioctl
Prepare for better compat ioctl handling by moving the user copy out
of ipv6_route_ioctl.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-18 17:35:02 -07:00
David S. Miller
da07f52d3c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Move the bpf verifier trace check into the new switch statement in
HEAD.

Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15 13:48:59 -07:00
David S. Miller
d00f26b623 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-05-14

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Merged tag 'perf-for-bpf-2020-05-06' from tip tree that includes CAP_PERFMON.

2) support for narrow loads in bpf_sock_addr progs and additional
   helpers in cg-skb progs, from Andrey.

3) bpf benchmark runner, from Andrii.

4) arm and riscv JIT optimizations, from Luke.

5) bpf iterator infrastructure, from Yonghong.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14 20:31:21 -07:00
Yonghong Song
3c32cc1bce bpf: Enable bpf_iter targets registering ctx argument types
Commit b121b341e5 ("bpf: Add PTR_TO_BTF_ID_OR_NULL
support") adds a field btf_id_or_null_non0_off to
bpf_prog->aux structure to indicate that the
first ctx argument is PTR_TO_BTF_ID reg_type and
all others are PTR_TO_BTF_ID_OR_NULL.
This approach does not really scale if we have
other different reg types in the future, e.g.,
a pointer to a buffer.

This patch enables bpf_iter targets registering ctx argument
reg types which may be different from the default one.
For example, for pointers to structures, the default reg_type
is PTR_TO_BTF_ID for tracing program. The target can register
a particular pointer type as PTR_TO_BTF_ID_OR_NULL which can
be used by the verifier to enforce accesses.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513180221.2949882-1-yhs@fb.com
2020-05-13 12:30:50 -07:00
Yonghong Song
ab2ee4fcb9 bpf: Change func bpf_iter_unreg_target() signature
Change func bpf_iter_unreg_target() parameter from target
name to target reg_info, similar to bpf_iter_reg_target().

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513180220.2949737-1-yhs@fb.com
2020-05-13 12:30:50 -07:00
Yonghong Song
15172a46fa bpf: net: Refactor bpf_iter target registration
Currently bpf_iter_reg_target takes parameters from target
and allocates memory to save them. This is really not
necessary, esp. in the future we may grow information
passed from targets to bpf_iter manager.

The patch refactors the code so target reg_info
becomes static and bpf_iter manager can just take
a reference to it.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200513180219.2949605-1-yhs@fb.com
2020-05-13 12:30:50 -07:00
Yonghong Song
138d0be35b net: bpf: Add netlink and ipv6_route bpf_iter targets
This patch added netlink and ipv6_route targets, using
the same seq_ops (except show() and minor changes for stop())
for /proc/net/{netlink,ipv6_route}.

The net namespace for these targets are the current net
namespace at file open stage, similar to
/proc/net/{netlink,ipv6_route} reference counting
the net namespace at seq_file open stage.

Since module is not supported for now, ipv6_route is
supported only if the IPV6 is built-in, i.e., not compiled
as a module. The restriction can be lifted once module
is properly supported for bpf_iter.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175910.2476329-1-yhs@fb.com
2020-05-09 17:05:26 -07:00
Eric Dumazet
d8882935fc ipv6: use DST_NOCOUNT in ip6_rt_pcpu_alloc()
We currently have to adjust ipv6 route gc_thresh/max_size depending
on number of cpus on a server, this makes very little sense.

If the kernels sets /proc/sys/net/ipv6/route/gc_thresh to 1024
and /proc/sys/net/ipv6/route/max_size to 4096, then we better
not track the percpu dst that our implementation uses.

Only routes not added (directly or indirectly) by the admin
should be tracked and limited.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Maciej Żenczykowski <maze@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-08 22:34:17 -07:00
Eric Dumazet
cf86a086a1 net/dst: use a smaller percpu_counter batch for dst entries accounting
percpu_counter_add() uses a default batch size which is quite big
on platforms with 256 cpus. (2*256 -> 512)

This means dst_entries_get_fast() can be off by +/- 2*(nr_cpus^2)
(131072 on servers with 256 cpus)

Reduce the batch size to something more reasonable, and
add logic to ip6_dst_gc() to call dst_entries_get_slow()
before calling the _very_ expensive fib6_run_gc() function.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-08 21:33:33 -07:00
Maciej Żenczykowski
09454fd0a4 Revert "ipv6: add mtu lock check in __ip6_rt_update_pmtu"
This reverts commit 19bda36c42:

| ipv6: add mtu lock check in __ip6_rt_update_pmtu
|
| Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu.
| It leaded to that mtu lock doesn't really work when receiving the pkt
| of ICMPV6_PKT_TOOBIG.
|
| This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4
| did in __ip_rt_update_pmtu.

The above reasoning is incorrect.  IPv6 *requires* icmp based pmtu to work.
There's already a comment to this effect elsewhere in the kernel:

  $ git grep -p -B1 -A3 'RTAX_MTU lock'
  net/ipv6/route.c=4813=

  static int rt6_mtu_change_route(struct fib6_info *f6i, void *p_arg)
  ...
    /* In IPv6 pmtu discovery is not optional,
       so that RTAX_MTU lock cannot disable it.
       We still use this lock to block changes
       caused by addrconf/ndisc.
    */

This reverts to the pre-4.9 behaviour.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Fixes: 19bda36c42 ("ipv6: add mtu lock check in __ip6_rt_update_pmtu")
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07 17:29:12 -07:00
David S. Miller
3793faad7b Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts were all overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06 22:10:13 -07:00
David S. Miller
115506fea4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-05-01 (v2)

The following pull-request contains BPF updates for your *net-next* tree.

We've added 61 non-merge commits during the last 6 day(s) which contain
a total of 153 files changed, 6739 insertions(+), 3367 deletions(-).

The main changes are:

1) pulled work.sysctl from vfs tree with sysctl bpf changes.

2) bpf_link observability, from Andrii.

3) BTF-defined map in map, from Andrii.

4) asan fixes for selftests, from Andrii.

5) Allow bpf_map_lookup_elem for SOCKMAP and SOCKHASH, from Jakub.

6) production cloudflare classifier as a selftes, from Lorenz.

7) bpf_ktime_get_*_ns() helper improvements, from Maciej.

8) unprivileged bpftool feature probe, from Quentin.

9) BPF_ENABLE_STATS command, from Song.

10) enable bpf_[gs]etsockopt() helpers for sock_ops progs, from Stanislav.

11) enable a bunch of common helpers for cg-device, sysctl, sockopt progs,
 from Stanislav.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 17:02:27 -07:00
David Ahern
8f34e53b60 ipv6: Use global sernum for dst validation with nexthop objects
Nik reported a bug with pcpu dst cache when nexthop objects are
used illustrated by the following:
    $ ip netns add foo
    $ ip -netns foo li set lo up
    $ ip -netns foo addr add 2001:db8:11::1/128 dev lo
    $ ip netns exec foo sysctl net.ipv6.conf.all.forwarding=1
    $ ip li add veth1 type veth peer name veth2
    $ ip li set veth1 up
    $ ip addr add 2001:db8:10::1/64 dev veth1
    $ ip li set dev veth2 netns foo
    $ ip -netns foo li set veth2 up
    $ ip -netns foo addr add 2001:db8:10::2/64 dev veth2
    $ ip -6 nexthop add id 100 via 2001:db8:10::2 dev veth1
    $ ip -6 route add 2001:db8:11::1/128 nhid 100

    Create a pcpu entry on cpu 0:
    $ taskset -a -c 0 ip -6 route get 2001:db8:11::1

    Re-add the route entry:
    $ ip -6 ro del 2001:db8:11::1
    $ ip -6 route add 2001:db8:11::1/128 nhid 100

    Route get on cpu 0 returns the stale pcpu:
    $ taskset -a -c 0 ip -6 route get 2001:db8:11::1
    RTNETLINK answers: Network is unreachable

    While cpu 1 works:
    $ taskset -a -c 1 ip -6 route get 2001:db8:11::1
    2001:db8:11::1 from :: via 2001:db8:10::2 dev veth1 src 2001:db8:10::1 metric 1024 pref medium

Conversion of FIB entries to work with external nexthop objects
missed an important difference between IPv4 and IPv6 - how dst
entries are invalidated when the FIB changes. IPv4 has a per-network
namespace generation id (rt_genid) that is bumped on changes to the FIB.
Checking if a dst_entry is still valid means comparing rt_genid in the
rtable to the current value of rt_genid for the namespace.

IPv6 also has a per network namespace counter, fib6_sernum, but the
count is saved per fib6_node. With the per-node counter only dst_entries
based on fib entries under the node are invalidated when changes are
made to the routes - limiting the scope of invalidations. IPv6 uses a
reference in the rt6_info, 'from', to track the corresponding fib entry
used to create the dst_entry. When validating a dst_entry, the 'from'
is used to backtrack to the fib6_node and check the sernum of it to the
cookie passed to the dst_check operation.

With the inline format (nexthop definition inline with the fib6_info),
dst_entries cached in the fib6_nh have a 1:1 correlation between fib
entries, nexthop data and dst_entries. With external nexthops, IPv6
looks more like IPv4 which means multiple fib entries across disparate
fib6_nodes can all reference the same fib6_nh. That means validation
of dst_entries based on external nexthops needs to use the IPv4 format
- the per-network namespace counter.

Add sernum to rt6_info and set it when creating a pcpu dst entry. Update
rt6_get_cookie to return sernum if it is set and update dst_check for
IPv6 to look for sernum set and based the check on it if so. Finally,
rt6_get_pcpu_route needs to validate the cached entry before returning
a pcpu entry (similar to the rt_cache_valid calls in __mkroute_input and
__mkroute_output for IPv4).

This problem only affects routes using the new, external nexthops.

Thanks to the kbuild test robot for catching the IS_ENABLED needed
around rt_genid_ipv6 before I sent this out.

Fixes: 5b98324ebe ("ipv6: Allow routes to use nexthop objects")
Reported-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 12:46:30 -07:00
Roopa Prabhu
4f80116d3d net: ipv4: add sysctl for nexthop api compatibility mode
Current route nexthop API maintains user space compatibility
with old route API by default. Dumps and netlink notifications
support both new and old API format. In systems which have
moved to the new API, this compatibility mode cancels some
of the performance benefits provided by the new nexthop API.

This patch adds new sysctl nexthop_compat_mode which is on
by default but provides the ability to turn off compatibility
mode allowing systems to run entirely with the new routing
API. Old route API behaviour and support is not modified by this
sysctl.

Uses a single sysctl to cover both ipv4 and ipv6 following
other sysctls. Covers dumps and delete notifications as
suggested by David Ahern.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-28 12:50:37 -07:00