IPv6 multipath notifications are about to be sent, but mlxsw is not
ready to process them, so ignore them.
The limitation will be lifted by a subsequent patch which will also stop
the kernel from sending a notification for each nexthop.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the IPv6 FIB notifier info with number of sibling routes being
notified.
This will later allow listeners to process one notification for a
multipath routes instead of N, where N is the number of nexthops.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct includes a 'skip_notify' flag that indicates if netlink
notifications to user space should be suppressed. As explained in commit
3b1137fe74 ("net: ipv6: Change notifications for multipath add to
RTA_MULTIPATH"), this is useful to suppress per-nexthop RTM_NEWROUTE
notifications when an IPv6 multipath route is added / deleted. Instead,
one notification is sent for the entire multipath route.
This concept is also useful for in-kernel notifications. Sending one
in-kernel notification for the addition / deletion of an IPv6 multipath
route - instead of one per-nexthop - provides a significant increase in
the insertion / deletion rate to underlying devices.
Add a 'skip_notify_kernel' flag to suppress in-kernel notifications.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some fields were not documented. Add documentation.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-06-17
This series contains updates to the iavf driver only.
Akeem updates the driver to change how VLAN tags are being populated and
programmed into the hardware by starting from the first member of the
list until the number of allowed VLAN tags is exhausted.
Mitch fixed the variable type since the variable counter starts out
negative and climbs to zero, so use a signed integer instead of
unsigned. Also increase the timeout to avoid erroneous errors. Fixed
the driver to be able to handle when the hardware hands us a null
receive descriptor with no data attached, yet is still valid.
Aleksandr fixes the driver to use GFP_ATOMIC when allocating memory in
atomic context.
Avinash updates the driver to fix a calculation error in virtchnl
regarding the valid length.
Jakub does some refactoring of the commands processing the watchdog
state machine to reduce the length and complexity of the function. Also
decalre watchdog task as delayed work and use a dedicated work queue to
service the driver tasks.
Paul updated the iavf_process_aq_command to call the necessary functions
to be able to clear cloud filter bits that need to be cleared.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
USB 3.2 capability in a host can be detected from the
xHCI Supported Protocol Capability major and minor revision fields.
If major is 0x3 and minor 0x20 then the host is USB 3.2 capable.
For USB 3.2 capable hosts set the root hub lane count to 2.
The Major Revision and Minor Revision fields contain a BCD version number.
The value of the Major Revision field is JJh and the value of the Minor
Revision field is MNh for version JJ.M.N, where JJ = major revision number,
M - minor version number, N = sub-minor version number,
e.g. version 3.1 is represented with a value of 0310h.
Also fix the extra whitespace printed out when announcing regular
SuperSpeed hosts.
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A USB3 device needs to be reset and re-enumarated if the port it
connects to goes to a error state, with link state inactive.
There is no use in trying to recover failed transactions by resetting
endpoints at this stage. Tests show that in rare cases, after multiple
endpoint resets of a roothub port the whole host controller might stop
completely.
Several retries to recover from transaction error can happen as
it can take a long time before the hub thread discovers the USB3
port error and inactive link.
We can't reliably detect the port error from slot or endpoint context
due to a limitation in xhci, see xhci specs section 4.8.3:
"There are several cases where the EP State field in the Output
Endpoint Context may not reflect the current state of an endpoint"
and
"Software should maintain an accurate value for EP State, by tracking it
with an internal variable that is driven by Events and Doorbell accesses"
Same appears to be true for slot state.
set a flag to the corresponding slot if a USB3 roothub port link goes
inactive to prevent both queueing new URBs and resetting endpoints.
Reported-by: Rapolu Chiranjeevi <chiranjeevi.rapolu@intel.com>
Tested-by: Rapolu Chiranjeevi <chiranjeevi.rapolu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Compilation on 32-bit ARM fails after commit 992aa864dc ("mlxsw:
spectrum_ptp: Add implementation for physical hardware clock operations")
because of 64-bit division:
arm-linux-gnueabi-ld:
drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.o: in function
`mlxsw_sp1_ptp_phc_settime': spectrum_ptp.c:(.text+0x39c): undefined
reference to `__aeabi_uldivmod'
Fix by using div_u64().
Fixes: 992aa864dc ("mlxsw: spectrum_ptp: Add implementation for physical hardware clock operations")
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The documentation mentions a non-existing capability KVM_CAP_USER_MEM.s
The right name is KVM_CAP_USER_MEMORY.
Signed-off-by: Dennis Restle <derestle@htwg-konstanz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mmu_ops->unmap() will fail when called on a BO that has not been
previously mapped, and the error path in panfrost_ioctl_create_bo()
can call drm_gem_object_put_unlocked() (which in turn calls
panfrost_mmu_unmap()) on a BO that has not been mapped yet.
Keep track of the mapped/unmapped state to avoid such issues.
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081343.16927-1-boris.brezillon@collabora.com
Stopping external metadata arrays during resync/recovery causes
retries, loop of interrupting and starting reconstruction, until it
hit at good moment to stop completely. While these retries
curr_mark_cnt can be small- especially on HDD drives, so subtraction
result can be smaller than 0. However it is casted to uint without
checking. As a result of it the status bar in /proc/mdstat while stopping
is strange (it jumps between 0% and 99%).
The real problem occurs here after commit 72deb455b5 ("block: remove
CONFIG_LBDAF"). Sector_div() macro has been changed, now the
divisor is casted to uint32. For db = -8 the divisior(db/32-1) becomes 0.
Check if db value can be really counted and replace these macro by
div64_u64() inline.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
When PGD_SIZE != PAGE_SIZE, arm64 uses kmem_cache for allocation of PGD
memory. That cache was initialized twice: first through
pgtable_cache_init() alias and then as an override for weak
pgd_cache_init().
Remove the alias from pgtable_cache_init() and keep the only pgd_cache
initialization in pgd_cache_init().
Fixes: caa8413601 ("x86/mm: Initialize PGD cache during mm initialization")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The @linaro.org address is not working and bonucing, so update the
references.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pulling linux/prctl.h into asm/ptrace.h in the arm64 UAPI headers causes
userspace build issues for any program (e.g. strace and qemu) that
includes both <sys/prctl.h> and <linux/ptrace.h> when using musl libc:
| error: redefinition of 'struct prctl_mm_map'
| struct prctl_mm_map {
See 6d4a106e19
for a public example of people working around this issue.
Although it's a bit grotty, fix this breakage by duplicating the prctl
constant definitions. Since these are part of the kernel ABI, they
cannot be changed in future and so it's not the end of the world to have
them open-coded.
Fixes: 43d4da2c45 ("arm64/sve: ptrace and ELF coredump support")
Cc: stable@vger.kernel.org
Acked-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Anisse Astier <aastier@freebox.fr>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Change first argument to MODULE_PARM_DESC() calls, that each of them
matched the actual module parameter name. The matching results in
changing (the 'parm' section from) the output of `modinfo overlay` from:
parm: ovl_check_copy_up:Obsolete; does nothing
parm: redirect_max:ushort
parm: ovl_redirect_max:Maximum length of absolute redirect xattr value
parm: redirect_dir:bool
parm: ovl_redirect_dir_def:Default to on or off for the redirect_dir feature
parm: redirect_always_follow:bool
parm: ovl_redirect_always_follow:Follow redirects even if redirect_dir feature is turned off
parm: index:bool
parm: ovl_index_def:Default to on or off for the inodes index feature
parm: nfs_export:bool
parm: ovl_nfs_export_def:Default to on or off for the NFS export feature
parm: xino_auto:bool
parm: ovl_xino_auto_def:Auto enable xino feature
parm: metacopy:bool
parm: ovl_metacopy_def:Default to on or off for the metadata only copy up feature
into:
parm: check_copy_up:Obsolete; does nothing
parm: redirect_max:Maximum length of absolute redirect xattr value (ushort)
parm: redirect_dir:Default to on or off for the redirect_dir feature (bool)
parm: redirect_always_follow:Follow redirects even if redirect_dir feature is turned off (bool)
parm: index:Default to on or off for the inodes index feature (bool)
parm: nfs_export:Default to on or off for the NFS export feature (bool)
parm: xino_auto:Auto enable xino feature (bool)
parm: metacopy:Default to on or off for the metadata only copy up feature (bool)
Signed-off-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
gcc gets a bit confused by the logic in ovl_setup_trap() and
can't figure out whether the local 'trap' variable in the caller
was initialized or not:
fs/overlayfs/super.c: In function 'ovl_fill_super':
fs/overlayfs/super.c:1333:4: error: 'trap' may be used uninitialized in this function [-Werror=maybe-uninitialized]
iput(trap);
^~~~~~~~~~
fs/overlayfs/super.c:1312:17: note: 'trap' was declared here
Reword slightly to make it easier for the compiler to understand.
Fixes: 146d62e5a5 ("ovl: detect overlapping layers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
NFS mounts can be disconnected from fs root. Don't fail the overlapping
layer check because of this.
The check is not authoritative anyway, since topology can change during or
after the check.
Reported-by: Antti Antinoja <antti@fennosys.fi>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 146d62e5a5 ("ovl: detect overlapping layers")
Processing of SDIO IRQs must obviously be prevented while the card is
system suspended, otherwise we may end up trying to communicate with an
uninitialized SDIO card.
Reports throughout the years shows that this is not only a theoretical
problem, but a real issue. So, let's finally fix this problem, by keeping
track of the state for the card and bail out before processing the SDIO
IRQ, in case the card is suspended.
Cc: stable@vger.kernel.org
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The O2Micro controller only supports tuning at 4-bits. So the host driver
needs to change the bus width while tuning and then set it back when done.
There was a bug in the original implementation in that mmc->ios.bus_width
also wasn't updated. Thus setting the incorrect blocksize in
sdhci_send_tuning which results in a tuning failure.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Fixes: 0086fc217d ("mmc: sdhci: Add support for O2 hardware tuning")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When Broadcom SDIO cards are idled they go to sleep and a whole
separate subsystem takes over their SDIO communication. This is the
Always-On-Subsystem (AOS) and it can't handle tuning requests.
Specifically, as tested on rk3288-veyron-minnie (which reports having
BCM4354/1 in dmesg), if I force a retune in brcmf_sdio_kso_control()
when "on = 1" (aka we're transition from sleep to wake) by whacking:
bus->sdiodev->func1->card->host->need_retune = 1
...then I can often see tuning fail. In this case dw_mmc reports "All
phases bad!"). Note that I don't get 100% failure, presumably because
sometimes the card itself has already transitioned away from the AOS
itself by the time we try to wake it up. If I force retuning when "on
= 0" (AKA force retuning right before sending the command to go to
sleep) then retuning is always OK.
NOTE: we need _both_ this patch and the patch to avoid triggering
tuning due to CRC errors in the sleep/wake transition, AKA ("brcmfmac:
sdio: Disable auto-tuning around commands expected to fail"). Though
both patches handle issues with Broadcom's AOS, the problems are
distinct:
1. We want to defer (but not ignore) asynchronous (like
timer-requested) tuning requests till the card is awake. However,
we want to ignore CRC errors during the transition, we don't want
to queue deferred tuning request.
2. You could imagine that the AOS could implement retuning but we
could still get errors while transitioning in and out of the AOS.
Similarly you could imagine a seamless transition into and out of
the AOS (with no CRC errors) even if the AOS couldn't handle
tuning.
ALSO NOTE: presumably there is never a desperate need to retune in
order to wake up the card, since doing so is impossible. Luckily the
only way the card can get into sleep state is if we had a good enough
tuning to send it the command to put it into sleep, so presumably that
"good enough" tuning is enough to wake us up, at least with a few
retries.
Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
We want SDIO drivers to be able to temporarily stop retuning when the
driver knows that the SDIO card is not in a state where retuning will
work (maybe because the card is asleep). We'll move the relevant
functions to a place where drivers can call them.
Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There are certain cases, notably when transitioning between sleep and
active state, when Broadcom SDIO WiFi cards will produce errors on the
SDIO bus. This is evident from the source code where you can see that
we try commands in a loop until we either get success or we've tried
too many times. The comment in the code reinforces this by saying
"just one write attempt may fail"
Unfortunately these failures sometimes end up causing an "-EILSEQ"
back to the core which triggers a retuning of the SDIO card and that
blocks all traffic to the card until it's done.
Let's disable retuning around the commands we expect might fail.
Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Normally when the MMC core sees an "-EILSEQ" error returned by a host
controller then it will trigger a retuning of the card. This is
generally a good idea.
However, if a command is expected to sometimes cause transfer errors
then these transfer errors shouldn't cause a re-tuning. This
re-tuning will be a needless waste of time. One example case where a
transfer is expected to cause errors is when transitioning between
idle (sometimes referred to as "sleep" in Broadcom code) and active
state on certain Broadcom WiFi SDIO cards. Specifically if the card
was already transitioning between states when the command was sent it
could cause an error on the SDIO bus.
Let's add an API that the SDIO function drivers can call that will
temporarily disable the auto-tuning functionality. Then we can add a
call to this in the Broadcom WiFi driver and any other driver that
might have similar needs.
NOTE: this makes the assumption that the card is already tuned well
enough that it's OK to disable the auto-retuning during one of these
error-prone situations. Presumably the driver code performing the
error-prone transfer knows how to recover / retry from errors. ...and
after we can get back to a state where transfers are no longer
error-prone then we can enable the auto-retuning again. If we truly
find ourselves in a case where the card needs to be retuned sometimes
to handle one of these error-prone transfers then we can always try a
few transfers first without auto-retuning and then re-try with
auto-retuning if the first few fail.
Without this change on rk3288-veyron-minnie I periodically see this in
the logs of a machine just sitting there idle:
dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ
Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This reverts commit 29f6589140.
After that patch landed I find that my kernel log on
rk3288-veyron-minnie and rk3288-veyron-speedy is filled with:
brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110
This seems to happen every time the Broadcom WiFi transitions out of
sleep mode. Reverting the commit fixes the problem for me, so that's
what this patch does.
Note that, in general, the justification in the original commit seemed
a little weak. It looked like someone was testing on a SD card
controller that would sometimes die if there were CRC errors on the
bus. This used to happen back in early days of dw_mmc (the controller
on my boards), but we fixed it. Disabling a feature on all boards
just because one SD card controller is broken seems bad.
Fixes: 29f6589140 ("brcmfmac: disable command decode in sdio_aos")
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Double Lo <double.lo@cypress.com>
Cc: Madhan Mohan R <madhanmohan.r@cypress.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Multiple ixp4xx specific files require macros from irqs.h that
were moved out from mach/irqs.h, e.g.:
arch/arm/mach-ixp4xx/vulcan-pci.c:41:19: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
arch/arm/mach-ixp4xx/vulcan-pci.c:49:10: error: implicit declaration of function 'IXP4XX_GPIO_IRQ' [-Werror,-Wimplicit-function-declaration]
return IXP4XX_GPIO_IRQ(INTA);
Include this header in all files that failed to build because of
that.
Fixes: dc8ef8cd3a ("ARM: ixp4xx: Convert to SPARSE_IRQ")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Kbuild complains about ixp4xx_irq_setup not being __init
itself in some configurations:
WARNING: vmlinux.o(.text+0x85bae4): Section mismatch in reference from the function ixp4xx_irq_setup() to the function .init.text:set_handle_irq()
The function ixp4xx_irq_setup() references
the function __init set_handle_irq().
This is often because ixp4xx_irq_setup lacks a __init
annotation or the annotation of set_handle_irq is wrong.
I suspect it normally gets inlined, so we get no such warning,
but clang makes this obvious when the function is left out
of line.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Platforms should not normally select all the device drivers, leave that
up to the user and the defconfig file.
In this case, we get a warning for randconfig builds:
WARNING: unmet direct dependencies detected for SERIAL_OF_PLATFORM
Depends on [n]: TTY [=y] && HAS_IOMEM [=y] && SERIAL_8250 [=n] && OF [=y]
Selected by [y]:
- MACH_IXP4XX_OF [=y] && ARCH_IXP4XX [=y]
Fixes: 9540724ca2 ("ARM: ixp4xx: Add device tree boot support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
The "+sec" extension is invalid for older ARM architectures, but
the code can now be built on any ARM configuration:
/tmp/trusted_foundations-2d0882.s: Assembler messages:
/tmp/trusted_foundations-2d0882.s:194: Error: architectural extension `sec' is not allowed for the current base architecture
/tmp/trusted_foundations-2d0882.s:201: Error: selected processor does not support `smc #0' in ARM mode
/tmp/trusted_foundations-2d0882.s:213: Error: architectural extension `sec' is not allowed for the current base architecture
/tmp/trusted_foundations-2d0882.s:220: Error: selected processor does not support `smc #0' in ARM mode
Add a dependency on ARMv7 for the build.
Fixes: 4cb5d9eca1 ("firmware: Move Trusted Foundations support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Setting params.phy_utmi_width in dwc2_lowlevel_hw_init() is pointless since
it's value will be overwritten by dwc2_init_params().
This change make sure to take in account the generic PHY width information
during paraminitialisation, done in dwc2_set_param_phy_utmi_width().
By doing so, the phy_utmi_width params can still be overrided by
devicetree specific params and will also be checked against hardware
capabilities.
Fixes: 707d80f0a3 ("usb: dwc2: gadget: Replace phyif with phy_utmi_width")
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Existing code would mistakenly return success in case of error instead
of a proper return value.
Fixes: e9c6c53730 ("RDMA/efa: Add common command handlers")
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The call to sc_buffer_alloc currently returns NULL (no buffer) or
a buffer descriptor.
There is a third case when the port is down. Currently that
returns NULL and this prevents the caller from properly handling the
sc_buffer_alloc() failure. A verbs code link test after the call is
racy so the indication needs to come from the state check inside the allocation
routine to be valid.
Fix by encoding the ECOMM failure like SDMA. IS_ERR_OR_NULL() tests
are added at all call sites. For verbs send, this needs to treat any
error by returning a completion without any MMIO copy.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Once a send context is taken down due to a link failure, any QPs waiting
for pio credits will stay on the waitlist indefinitely.
Fix by wakeing up all QPs linked to piowait list.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Once an SDMA engine is taken down due to a link failure, any waiting QPs
that do not have outstanding descriptors in the ring will stay
on the dmawait list as long as the port is down.
Since there is no timer running, they will stay there for a long time.
The fix is to wake up all iowaits linked to dmawait. The send engine
will build and post packets that get flushed back.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
SDMA and pio flushes will cause a lot of packets to be transmitted
after a link has gone down, using a lot of CPU to retransmit
packets.
Fix for RC QPs by recognizing the flush status and:
- Forcing a timer start
- Putting the QP into a "send one" mode
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This paves the way for another patch that reacts to a
flush sdma completion for RC.
Fixes: 81cd3891f0 ("IB/hfi1: Add support for 16B Management Packets")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Heavy contention of the sde flushlist_lock can cause hard lockups at
extreme scale when the flushing logic is under stress.
Mitigate by replacing the item at a time copy to the local list with
an O(1) list_splice_init() and using the high priority work queue to
do the flushes.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fred Klassen says:
====================
UDP GSO audit tests
Updates to UDP GSO selftests ot optionally stress test CMSG
subsytem, and report the reliability and performance of both
TX Timestamping and ZEROCOPY messages.
====================
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that failure on any individual test results in an overall
failure of the test script.
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Audit tests count the total number of messages sent and compares
with total number of CMSG received on error queue. Example:
udp gso zerocopy timestamp audit
udp rx: 1599 MB/s 1166414 calls/s
udp tx: 1615 MB/s 27395 calls/s 27395 msg/s
udp rx: 1634 MB/s 1192261 calls/s
udp tx: 1633 MB/s 27699 calls/s 27699 msg/s
udp rx: 1633 MB/s 1191358 calls/s
udp tx: 1631 MB/s 27678 calls/s 27678 msg/s
Summary over 4.000 seconds...
sum udp tx: 1665 MB/s 82772 calls (27590/s) 82772 msgs (27590/s)
Tx Timestamps: 82772 received 0 errors
Zerocopy acks: 82772 received
Errors are thrown if CMSG count does not equal send count,
example:
Summary over 4.000 seconds...
sum tcp tx: 7451 MB/s 493706 calls (123426/s) 493706 msgs (123426/s)
./udpgso_bench_tx: Unexpected number of Zerocopy completions: 493706 expected 493704 received
Also reduce individual test time from 4 to 3 seconds so that
overall test time does not increase significantly.
v3: Enhancements as per Willem de Bruijn <willemb@google.com>
- document -P option for TCP audit
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This enhancement adds options that facilitate load testing with
additional TX CMSG options, and to optionally print results of
various send CMSG operations.
These options are especially useful in isolating situations
where error-queue messages are lost when combined with other
CMSG operations (e.g. SO_ZEROCOPY).
New options:
-a - count all CMSG messages and match to sent messages
-T - add TX CMSG that requests TX software timestamps
-H - similar to -T except request TX hardware timestamps
-P - call poll() before reading error queue
-v - print detailed results
v2: Enhancements as per Willem de Bruijn <willemb@google.com>
- Updated control and buffer parameters for recvmsg
- poll() parameter cleanup
- fail on bad audit results
- remove TOS options
- improved reporting
v3: Enhancements as per Willem de Bruijn <willemb@google.com>
- add SOF_TIMESTAMPING_OPT_TSONLY to eliminate MSG_TRUNC
- general code cleanup
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull vfs fixes from Al Viro:
"MS_MOVE regression fix + breakage in fsmount(2) (also introduced in
this cycle, along with fsmount(2) itself).
I'm still digging through the piles of mail, so there might be more
fixes to follow, but these two are obvious and self-contained, so
there's no point delaying those..."
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/namespace: fix unprivileged mount propagation
vfs: fsmount: add missing mntget()
Florian Westphal says:
====================
net: ipv4: remove erroneous advancement of list pointer
Tariq reported a soft lockup on net-next that Mellanox was able to
bisect to 2638eb8b50 ("net: ipv4: provide __rcu annotation for ifa_list").
While reviewing above patch I found a regression when addresses have a
lifetime specified.
Second patch extends rtnetlink.sh to trigger crash
(without first patch applied).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This exercises kernel code path that deal with addresses that have
a limited lifetime.
Without previous fix, this triggers following crash on net-next:
BUG: KASAN: null-ptr-deref in check_lifetime+0x403/0x670
Read of size 8 at addr 0000000000000010 by task kworker [..]
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Causes crash when lifetime expires on an adress as garbage is
dereferenced soon after.
This used to look like this:
for (ifap = &ifa->ifa_dev->ifa_list;
*ifap != NULL; ifap = &(*ifap)->ifa_next) {
if (*ifap == ifa) ...
but this was changed to:
struct in_ifaddr *tmp;
ifap = &ifa->ifa_dev->ifa_list;
tmp = rtnl_dereference(*ifap);
while (tmp) {
tmp = rtnl_dereference(tmp->ifa_next); // Bogus
if (rtnl_dereference(*ifap) == ifa) {
...
ifap = &tmp->ifa_next; // Can be NULL
tmp = rtnl_dereference(*ifap); // Dereference
}
}
Remove the bogus assigment/list entry skip.
Fixes: 2638eb8b50 ("net: ipv4: provide __rcu annotation for ifa_list")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to a reversed dependency, it is possible to build
the lower ptp driver as a loadable module and the actual
driver using it as built-in, causing a link error:
drivers/net/dsa/sja1105/sja1105_spi.o: In function `sja1105_static_config_upload':
sja1105_spi.c:(.text+0x6f0): undefined reference to `sja1105_ptp_reset'
drivers/net/dsa/sja1105/sja1105_spi.o:(.data+0x2d4): undefined reference to `sja1105et_ptp_cmd'
drivers/net/dsa/sja1105/sja1105_spi.o:(.data+0x604): undefined reference to `sja1105pqrs_ptp_cmd'
drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_remove':
sja1105_main.c:(.text+0x8d4): undefined reference to `sja1105_ptp_clock_unregister'
drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_rxtstamp_work':
sja1105_main.c:(.text+0x964): undefined reference to `sja1105_tstamp_reconstruct'
drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_setup':
sja1105_main.c:(.text+0xb7c): undefined reference to `sja1105_ptp_clock_register'
drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_port_deferred_xmit':
sja1105_main.c:(.text+0x1fa0): undefined reference to `sja1105_ptpegr_ts_poll'
sja1105_main.c:(.text+0x1fc4): undefined reference to `sja1105_tstamp_reconstruct'
drivers/net/dsa/sja1105/sja1105_main.o:(.rodata+0x5b0): undefined reference to `sja1105_get_ts_info'
Change the Makefile logic to always build the ptp module
the same way as the rest. Another option would be to
just add it to the same module and remove the exports,
but I don't know if there was a good reason to keep them
separate.
Fixes: bb77f36ac2 ("net: dsa: sja1105: Add support for the PTP clock")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When building without CONFIG_OF, we get a harmless build warning:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function 'stmmac_phy_setup':
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:973:22: error: unused variable 'node' [-Werror=unused-variable]
struct device_node *node = priv->plat->phy_node;
Reword it so we always use the local variable, by making it the
fwnode pointer instead of the device_node.
Fixes: 74371272f9 ("net: stmmac: Convert to phylink and remove phylib logic")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Lots of bug fixes here:
1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.
2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
Crispin.
3) Use after free in psock backlog workqueue, from John Fastabend.
4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
Salem.
5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.
6) Network header needs to be set for packet redirect in nfp, from
John Hurley.
7) Fix udp zerocopy refcnt, from Willem de Bruijn.
8) Don't assume linear buffers in vxlan and geneve error handlers,
from Stefano Brivio.
9) Fix TOS matching in mlxsw, from Jiri Pirko.
10) More SCTP cookie memory leak fixes, from Neil Horman.
11) Fix VLAN filtering in rtl8366, from Linus Walluij.
12) Various TCP SACK payload size and fragmentation memory limit fixes
from Eric Dumazet.
13) Use after free in pneigh_get_next(), also from Eric Dumazet.
14) LAPB control block leak fix from Jeremy Sowden"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
lapb: fixed leak of control-blocks.
tipc: purge deferredq list for each grp member in tipc_group_delete
ax25: fix inconsistent lock state in ax25_destroy_timer
neigh: fix use-after-free read in pneigh_get_next
tcp: fix compile error if !CONFIG_SYSCTL
hv_sock: Suppress bogus "may be used uninitialized" warnings
be2net: Fix number of Rx queues used for flow hashing
net: handle 802.1P vlan 0 packets properly
tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
tcp: add tcp_min_snd_mss sysctl
tcp: tcp_fragment() should apply sane memory limits
tcp: limit payload size of sacked skbs
Revert "net: phylink: set the autoneg state in phylink_phy_change"
bpf: fix nested bpf tracepoints with per-cpu data
bpf: Fix out of bounds memory access in bpf_sk_storage
vsock/virtio: set SOCK_DONE on peer shutdown
net: dsa: rtl8366: Fix up VLAN filtering
net: phylink: set the autoneg state in phylink_phy_change
net: add high_order_alloc_disable sysctl/static key
tcp: add tcp_tx_skb_cache sysctl
...
