Commit graph

51 commits

Author SHA1 Message Date
Trond Myklebust
b5fdf8418c NFSv4: Add support for CB_RECALL_ANY for flexfiles layouts
When we receive a CB_RECALL_ANY that asks us to return flexfiles
layouts, we iterate through all the layouts and look at whether or
not there are active open file descriptors that might need them
for I/O. If there are no such descriptors, we return the layouts.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-03-16 08:34:30 -04:00
Trond Myklebust
088f3e68d8 pNFS/flexfiles: Add tracing for layout errors
Trace layout errors for pNFS/flexfiles on read/write/commit operations.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-15 10:54:33 -05:00
Trond Myklebust
0722dc9fea pNFS/flexfiles: Record resend attempts on I/O failure
If the attempt to do pNFS fails, then record what action we
take to recover (resend, reset to pnfs or reset to mds).

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-15 10:54:32 -05:00
Trond Myklebust
118b629219 NFS: Fix fix of show_nfs_errors
Casting a negative value to an unsigned long is not the same as
converting it to its absolute value.

Fixes: 96650e2eff ("NFS: Fix show_nfs_errors macros again")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-15 10:54:32 -05:00
Trond Myklebust
25925b00a9 NFSv4: Improve read/write/commit tracing
Ensure we always return the number of bytes read/written. Also display
the pnfs filehandle if it is in use.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-15 10:54:32 -05:00
Chuck Lever
2bb50aabb6 NFS4: Report callback authentication errors
This seems to be a somewhat common issue with Kerberos NFSv4.0
set-ups.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-01-15 10:54:31 -05:00
Chuck Lever
21f86d2d63 NFS4: Trace lock reclaims
One of the most frustrating messages our sustaining team sees is
the "Lock reclaim failed!" message. Add some observability in the
client's lock reclaim logic so we can capture better data the
first time a problem occurs.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-11-18 11:04:32 +01:00
Chuck Lever
511ba52e4c NFS4: Trace state recovery operation
Add a trace point in the main state manager loop to observe state
recovery operation. Help track down state recovery bugs.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-11-18 10:58:39 +01:00
Trond Myklebust
d5b9216fd5 pnfs/flexfiles: Add tracepoints for detecting pnfs fallback to MDS
Add tracepoints to allow debugging of the event chain leading to
a pnfs fallback to doing I/O through the MDS.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-18 15:50:28 -04:00
Chuck Lever
62a92ba97a NFS: Record task, client ID, and XID in xdr_status trace points
When triggering an nfs_xdr_status trace point, record the task ID
and XID of the failing RPC to better pinpoint the problem.

This feels like a bit of a layering violation.

Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-07-09 10:30:25 -04:00
Chuck Lever
96650e2eff NFS: Fix show_nfs_errors macros again
I noticed that NFS status values stopped working again.

trace_print_symbols_seq() takes an unsigned long. Passing a negative
errno or negative NFSERR value just confuses it, and since we're
using C macros here and not static inline functions, all bets are
off due to implicit type conversion.

Straight-line the calling conventions so that error codes are stored
in the trace record as positive values in an unsigned long field,
mapped to symbolic as an unsigned long, and displayed as a negative
value, to continue to enable grepping on "error=-".

It's often the case that an error value that is positive is a byte
count but when it's negative, it's an error (e.g. nfs4_write). Fix
those cases so that the value that is eventually stored in the
error field is a positive NFS status or errno, or zero.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-07-09 10:30:25 -04:00
Chuck Lever
c5833f0dc4 NFS4: Add a trace event to record invalid CB sequence IDs
Help debug NFSv4 callback failures.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-07-09 10:30:25 -04:00
Chuck Lever
f23f658404 NFS: Add trace events to report non-zero NFS status codes
These can help field troubleshooting without needing the overhead
of a full network capture (ie, tcpdump).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 12:03:21 -05:00
Chuck Lever
5b2095d0ce NFS: Fix NFSv4 symbolic trace point output
These symbolic values were not being displayed in string form.
TRACE_DEFINE_ENUM was missing in many cases. It also turns out that
__print_symbolic wants an unsigned long in the first field...

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02 12:05:18 -05:00
Trond Myklebust
2edaead69e NFSv4: Fix a tracepoint Oops in initiate_file_draining()
Now that the value of 'ino' can be NULL or an ERR_PTR(), we need to
change the test in the tracepoint.

Fixes: ce5624f7e6 ("NFSv4: Return NFS4ERR_DELAY when a layout fails...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-09-14 16:24:08 -04:00
Trond Myklebust
2a534a7473 NFSv4: Fix a tracepoint Oops in initiate_file_draining()
Now that the value of 'ino' can be NULL or an ERR_PTR(), we need to
change the test in the tracepoint.

Fixes: ce5624f7e6 ("NFSv4: Return NFS4ERR_DELAY when a layout fails...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-09-14 16:23:16 -04:00
Linus Torvalds
c3e9c04b89 NFS client updates for Linux 4.15
Stable bugfixes:
 - Revalidate "." and ".." correctly on open
 - Avoid RCU usage in tracepoints
 - Fix ugly referral attributes
 - Fix a typo in nomigration mount option
 - Revert "NFS: Move the flock open mode check into nfs_flock()"
 
 Features:
 - Implement a stronger send queue accounting system for NFS over RDMA
 - Switch some atomics to the new refcount_t type
 
 Other bugfixes and cleanups:
 - Clean up access mode bits
 - Remove special-case revalidations in nfs_opendir()
 - Improve invalidating NFS over RDMA memory for async operations that time out
 - Handle NFS over RDMA replies with a worqueue
 - Handle NFS over RDMA sends with a workqueue
 - Fix up replaying interrupted requests
 - Remove dead NFS over RDMA definitions
 - Update NFS over RDMA copyright information
 - Be more consistent with bool initialization and comparisons
 - Mark expected switch fall throughs
 - Various sunrpc tracepoint cleanups
 - Fix various OPEN races
 - Fix a typo in nfs_rename()
 - Use common error handling code in nfs_lock_and_join_request()
 - Check that some structures are properly cleaned up during net_exit()
 - Remove net pointer from dprintk()s
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAloPWGwACgkQ18tUv7Cl
 QOtMVhAAufCkDxqO2lmDH+0JyYUKMcoOMYtI8s2J1HrbEzTW/dVtI28fPAKEEd4m
 2JjNqnO516Jiv+g3E6eO4uunZRb4IB3AYT6YaTwmBFE+l7tpMdPb1xybOBP02Hji
 Y29kzLXwxxvnoxEqFalzCzV2BeRb2kAw6mayY9FxH6AfiEEQZfmxLCYgVuYa2jTC
 Z/B5E0GxAf28Aj0bIP8lLKbOkFijo851DB88UffEOZQGKUDlAd3GNUSSHb81Rj0N
 4ef7bKoGylkIpZ1PdTChdG1+RKqud02zrmQfmEwXui3eUwhOWy8hrKloNykqR5sj
 pgoDz79euAq4TDVyQKtutnbvVxfCcBeMYAXZhXkZLVcl+39in0kuLj4SxU5AmDhf
 ErnthG4W7jsLMM96kMvSTaoh4uwioviG1KmZfvuvUoMBSwtiX18hFTWtFKRD6x9e
 PNOqBdh8nkKYEFbEO4ksfYaWZJ5AuyFIQiIpj1gm+7sf039oN/zEuPV+jaEJG0oa
 Ef9IqHrQbbCUFYFjpBENr3HjU3igTTaxQ5iq+VYl4zg1pw6m6JTojqZ6qtQzqOYS
 O3N1ygeShsW934z8QcWjtEyeUXIB3JF9vUS3gEBgWPDyCltGXyq4Cq6Lod4s4JCb
 pWGI6wJLX1Fg6nq7cj0S4Or3QBgz2q8ZyBxssamhdvON/Ef5ccI=
 =2Zc1
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client updates from Anna Schumaker:
 "Stable bugfixes:
   - Revalidate "." and ".." correctly on open
   - Avoid RCU usage in tracepoints
   - Fix ugly referral attributes
   - Fix a typo in nomigration mount option
   - Revert "NFS: Move the flock open mode check into nfs_flock()"

  Features:
   - Implement a stronger send queue accounting system for NFS over RDMA
   - Switch some atomics to the new refcount_t type

  Other bugfixes and cleanups:
   - Clean up access mode bits
   - Remove special-case revalidations in nfs_opendir()
   - Improve invalidating NFS over RDMA memory for async operations that
     time out
   - Handle NFS over RDMA replies with a worqueue
   - Handle NFS over RDMA sends with a workqueue
   - Fix up replaying interrupted requests
   - Remove dead NFS over RDMA definitions
   - Update NFS over RDMA copyright information
   - Be more consistent with bool initialization and comparisons
   - Mark expected switch fall throughs
   - Various sunrpc tracepoint cleanups
   - Fix various OPEN races
   - Fix a typo in nfs_rename()
   - Use common error handling code in nfs_lock_and_join_request()
   - Check that some structures are properly cleaned up during
     net_exit()
   - Remove net pointer from dprintk()s"

* tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (62 commits)
  NFS: Revert "NFS: Move the flock open mode check into nfs_flock()"
  NFS: Fix typo in nomigration mount option
  nfs: Fix ugly referral attributes
  NFS: super: mark expected switch fall-throughs
  sunrpc: remove net pointer from messages
  nfs: remove net pointer from messages
  sunrpc: exit_net cleanup check added
  nfs client: exit_net cleanup check added
  nfs/write: Use common error handling code in nfs_lock_and_join_requests()
  NFSv4: Replace closed stateids with the "invalid special stateid"
  NFSv4: nfs_set_open_stateid must not trigger state recovery for closed state
  NFSv4: Check the open stateid when searching for expired state
  NFSv4: Clean up nfs4_delegreturn_done
  NFSv4: cleanup nfs4_close_done
  NFSv4: Retry NFS4ERR_OLD_STATEID errors in layoutreturn
  pNFS: Retry NFS4ERR_OLD_STATEID errors in layoutreturn-on-close
  NFSv4: Don't try to CLOSE if the stateid 'other' field has changed
  NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID.
  NFS: Fix a typo in nfs_rename()
  NFSv4: Fix open create exclusive when the server reboots
  ...
2017-11-17 14:18:00 -08:00
Trond Myklebust
ad9e02dc02 NFSv4: Add a tracepoint to document open stateid updates
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-17 16:43:45 -05:00
Anna Schumaker
3944369db7 NFS: Avoid RCU usage in tracepoints
There isn't an obvious way to acquire and release the RCU lock during a
tracepoint, so we can't use the rpc_peeraddr2str() function here.
Instead, rely on the client's cl_hostname, which should have similar
enough information without needing an rcu_dereference().

Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: stable@vger.kernel.org # v3.12
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-17 16:43:43 -05:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Jeff Layton
5b5faaf6df nfs4: add NFSv4 LOOKUPP handlers
This will be needed in order to implement the get_parent export op
for nfsd.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-07-13 16:00:15 -04:00
Anna Schumaker
ad05cc0f04 NFS: Make trace_nfs4_setup_sequence() available to NFS v4.0
This tracepoint displays information about the slot that was chosen for
the RPC, in addition to session information.  This could be useful
information for debugging, and we can set the session id hash to 0 to
indicate that there is no session.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-01-30 13:14:50 -05:00
Daniel Bristot de Oliveira
752d596b39 tracing: Use __get_str() when manipulating strings
Use __get_str(str) rather than __get_dynamic_array(str) when
deadling with strings.

It is just a code cleanup, no changes on tracepoint ABI.

Link: http://lkml.kernel.org/r/ea260df91817411cca2a1f3db2abd88860094788.1467407618.git.bristot@redhat.com

Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-nfs@vger.kernel.org
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-07-15 15:52:20 -04:00
Jeff Layton
183d9e7b11 pnfs: rework LAYOUTGET retry handling
There are several problems in the way a stateid is selected for a
LAYOUTGET operation:

We pick a stateid to use in the RPC prepare op, but that makes
it difficult to serialize LAYOUTGETs that use the open stateid. That
serialization is done in pnfs_update_layout, which occurs well before
the rpc_prepare operation.

Between those two events, the i_lock is dropped and reacquired.
pnfs_update_layout can find that the list has lsegs in it and not do any
serialization, but then later pnfs_choose_layoutget_stateid ends up
choosing the open stateid.

This patch changes the client to select the stateid to use in the
LAYOUTGET earlier, when we're searching for a usable layout segment.
This way we can do it all while holding the i_lock the first time, and
ensure that we serialize any LAYOUTGET call that uses a non-layout
stateid.

This also means a rework of how LAYOUTGET replies are handled, as we
must now get the latest stateid if we want to retransmit in response
to a retryable error.

Most of those errors boil down to the fact that the layout state has
changed in some fashion. Thus, what we really want to do is to re-search
for a layout when it fails with a retryable error, so that we can avoid
reissuing the RPC at all if possible.

While the LAYOUTGET RPC is async, the initiating thread always waits for
it to complete, so it's effectively synchronous anyway. Currently, when
we need to retry a LAYOUTGET because of an error, we drive that retry
via the rpc state machine.

This means that once the call has been submitted, it runs until it
completes. So, we must move the error handling for this RPC out of the
rpc_call_done operation and into the caller.

In order to handle errors like NFS4ERR_DELAY properly, we must also
pass a pointer to the sliding timeout, which is now moved to the stack
in pnfs_update_layout.

The complicating errors are -NFS4ERR_RECALLCONFLICT and
-NFS4ERR_LAYOUTTRYLATER, as those involve a timeout after which we give
up and return NULL back to the caller. So, there is some special
handling for those errors to ensure that the layers driving the retries
can handle that appropriately.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-17 15:48:12 -04:00
Trond Myklebust
daaadd2283 Merge branch 'bugfixes'
* bugfixes:
  SUNRPC: Fixup socket wait for memory
  SUNRPC: Fix a missing break in rpc_anyaddr()
  pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()
  NFS: Fix attribute cache revalidation
  NFS: Ensure we revalidate attributes before using execute_ok()
  NFS: Flush reclaim writes using FLUSH_COND_STABLE
  NFS: Background flush should not be low priority
  NFSv4.1/pnfs: Fixup an lo->plh_block_lgets imbalance in layoutreturn
  NFSv4: Don't perform cached access checks before we've OPENed the file
  NFS: Allow the combination pNFS and labeled NFS
  NFS42: handle layoutstats stateid error
  nfs: Fix race in __update_open_stateid()
  nfs: fix missing assignment in nfs4_sequence_done tracepoint
2016-01-07 18:45:36 -05:00
Trond Myklebust
e07db907eb NFSv4: List stateid information in the callback tracepoints
The stateid is extremely valuable when debugging.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28 14:33:05 -05:00
Trond Myklebust
f4848303ce pNFS: Modify pnfs_update_layout tracepoints to use layout stateid
Instead of displaying a layout segment pointer in these tracepoints,
let's use the layout stateid, now that Olga gave us a set of tools for
displaying them.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28 09:57:14 -05:00
Jeff Layton
9a4bf31d05 nfs: add new tracepoint for pnfs_update_layout
pnfs_update_layout is really the "nexus" of layout handling. If it
returns NULL then we end up going through the MDS. This patch adds
some tracepoints to that function that allow us to determine the
cause when we end up going through the MDS unexpectedly.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28 09:57:14 -05:00
Olga Kornievskaia
9759b0fb1d Adding tracepoint to cached open
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28 09:57:14 -05:00
Olga Kornievskaia
48c9579a1a Adding stateid information to tracepoints
Operations to which stateid information is added:
close, delegreturn, open, read, setattr, layoutget, layoutcommit, test_stateid,
write, lock, locku, lockt

Format is "stateid=<seqid>:<crc32 hash stateid.other>", also "openstateid=",
"layoutstateid=", and "lockstateid=" for open_file, layoutget, set_lock
tracepoints.

New function is added to internal.h, nfs_stateid_hash(), to compute the hash

trace_nfs4_setattr() is moved from nfs4_do_setattr() to _nfs4_do_setattr()
to get access to stateid.

trace_nfs4_setattr and trace_nfs4_delegreturn are changed from INODE_EVENT
to new event type, INODE_STATEID_EVENT which is same as INODE_EVENT but adds
stateid information

for locking tracepoints, moved trace_nfs4_set_lock() into _nfs4_do_setlk()
to get access to stateid information, and removed trace_nfs4_lock_reclaim(),
trace_nfs4_lock_expired() as they call into _nfs4_do_setlk() and both were
previously same LOCK_EVENT type.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28 09:57:14 -05:00
Andrew Elble
52618df95d nfs: fix missing assignment in nfs4_sequence_done tracepoint
status_flags not set

Signed-off-by: Andrew Elble <aweits@rit.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-28 09:57:08 -05:00
Anna Schumaker
39d0d3bdf7 NFS: Fix a tracepoint NULL-pointer dereference
Running xfstest generic/013 with the tracepoint nfs:nfs4_open_file
enabled produces a NULL-pointer dereference when calculating fileid and
filehandle of the opened file.  Fix this by checking if state is NULL
before trying to use the inode pointer.

Reported-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-10-06 18:56:25 -04:00
Trond Myklebust
249b2eef64 NFSv4: Add a tracepoint for CB_LAYOUTRECALL
Only support for single file layoutrecall for now.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-25 14:40:06 -04:00
Trond Myklebust
7cd148610a NFSv4: Add a tracepoint for CB_GETATTR
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-25 14:40:05 -04:00
Trond Myklebust
6a463beb9a NFSv4.1/pnfs: Add a tracepoint for return-on-close events
Allow tracing of return-on-close.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-25 14:40:05 -04:00
David Howells
2b0143b5c9 VFS: normal filesystems (and lustre): d_inode() annotations
that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
Weston Andros Adamson
d45f60c678 nfs: merge nfs_pgio_data into _header
struct nfs_pgio_data only exists as a member of nfs_pgio_header, but is
passed around everywhere, because there used to be multiple _data structs
per _header. Many of these functions then use the _data to find a pointer
to the _header.  This patch cleans this up by merging the nfs_pgio_data
structure into nfs_pgio_header and passing nfs_pgio_header around instead.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-06-24 18:47:00 -04:00
Anna Schumaker
9c7e1b3d50 NFS: Create a common read and write data struct
At this point, the only difference between nfs_read_data and
nfs_write_data is the write verifier.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-28 18:12:47 -04:00
Trond Myklebust
08cb47faa4 NFSv4.1: Add tracepoints for debugging test_stateid events
Add tracepoints to detect issues with the TEST_STATEID operation.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:27 -04:00
Trond Myklebust
2f92ae343e NFSv4.1: Add tracepoints for debugging slot table operations
Add tracepoints to nfs41_setup_sequence and nfs41_sequence_done
to track session and slot table state changes.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:27 -04:00
Trond Myklebust
1037e6eaa3 NFSv4.1: Add tracepoints for debugging layoutget/return/commit
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:26 -04:00
Trond Myklebust
cc668ab30b NFSv4: Add tracepoints for debugging reads and writes
Set up tracepoints to track read, write and commit, as well as
pNFS reads and writes and commits to the data server.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:26 -04:00
Trond Myklebust
b5f875a925 NFSv4: Add tracepoints for debugging getattr
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:25 -04:00
Trond Myklebust
1f2d30b533 NFSv4: Add tracepoints for debugging the idmapper
Add tracepoints to help debug uid/gid mappings to username/group.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:25 -04:00
Trond Myklebust
ca8acf8d84 NFSv4: Add tracepoints for debugging delegations
Set up tracepoints to track when delegations are set, reclaimed,
returned by the client, or recalled by the server.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:24 -04:00
Trond Myklebust
fbc6f7c233 NFSv4: Add tracepoints for debugging rename
Add tracepoints to debug renames.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:23 -04:00
Trond Myklebust
c1578b769a NFSv4: Add tracepoints for debugging inode manipulations
Set up basic tracepoints for debugging NFSv4 setattr, access,
readlink, readdir, get_acl set_acl get_security_label,
and set_security_label.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:23 -04:00
Trond Myklebust
078ea3dfe3 NFSv4: Add tracepoints for debugging lookup/create operations
Set up basic tracepoints for debugging NFSv4 lookup, unlink/remove,
symlink, mkdir, mknod, fs_locations and secinfo.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:22 -04:00
Trond Myklebust
d1b748a5e7 NFSv4: Add tracepoints for debugging file locking
Set up basic tracepoints for debugging NFSv4 file lock/unlock

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:22 -04:00
Trond Myklebust
42113a7539 NFSv4: Add tracepoints for debugging file open
Set up basic tracepoints for debugging NFSv4 file open/close

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-22 08:58:21 -04:00