Commit graph

513 commits

Author SHA1 Message Date
Linus Torvalds
2da2ca24a3 Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
 "A set of fixes and updates for the locking code:

   - Prevent lockdep from updating irq state within its own code and
     thereby confusing itself.

   - Buid fix for older GCCs which mistreat anonymous unions

   - Add a missing lockdep annotation in down_read_non_onwer() which
     causes up_read_non_owner() to emit a lockdep splat

   - Remove the custom alpha dec_and_lock() implementation which is
     incorrect in terms of ordering and use the generic one.

  The remaining two commits are not strictly fixes. They provide irqsave
  variants of atomic_dec_and_lock() and refcount_dec_and_lock(). These
  are required to merge the relevant updates and cleanups into different
  maintainer trees for 4.19, so routing them into mainline without
  actual users is the sanest approach.

  They should have been in -rc1, but last weekend I took the liberty to
  just avoid computers in order to regain some mental sanity"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/qspinlock: Fix build for anonymous union in older GCC compilers
  locking/lockdep: Do not record IRQ state within lockdep code
  locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMS
  locking/refcounts: Implement refcount_dec_and_lock_irqsave()
  atomic: Add irqsave variant of atomic_dec_and_lock()
  alpha: Remove custom dec_and_lock() implementation
2018-06-24 19:36:16 +08:00
Steven Rostedt (VMware)
fcc784be83 locking/lockdep: Do not record IRQ state within lockdep code
While debugging where things were going wrong with mapping
enabling/disabling interrupts with the lockdep state and actual real
enabling and disabling interrupts, I had to silent the IRQ
disabling/enabling in debug_check_no_locks_freed() because it was
always showing up as it was called before the splat was.

Use raw_local_irq_save/restore() for not only debug_check_no_locks_freed()
but for all internal lockdep functions, as they hide useful information
about where interrupts were used incorrectly last.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/lkml/20180404140630.3f4f4c7a@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21 18:19:01 +02:00
Waiman Long
03eeafdd9a locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMS
It was found that the use of up_read_non_owner() in NFS was causing
the following warning when DEBUG_RWSEMS was configured.

  DEBUG_LOCKS_WARN_ON(sem->owner != ((struct task_struct *)(1UL << 0)))

Looking into the rwsem.c file, it was discovered that the corresponding
down_read_non_owner() function was not setting the owner field properly.
This is fixed now, and the warning should be gone.

Fixes: 5149cbac42 ("locking/rwsem: Add DEBUG_RWSEMS to look for lock/unlock mismatches")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Gavin Schenk <g.schenk@eckelmann.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-nfs@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1527168398-4291-1-git-send-email-longman@redhat.com
2018-06-20 11:29:23 +02:00
Kees Cook
6396bb2215 treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Kees Cook
6da2ec5605 treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Linus Torvalds
92400b8c8b Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:

 - Lots of tidying up changes all across the map for Linux's formal
   memory/locking-model tooling, by Alan Stern, Akira Yokosawa, Andrea
   Parri, Paul E. McKenney and SeongJae Park.

   Notable changes beyond an overall update in the tooling itself is the
   tidying up of spin_is_locked() semantics, which spills over into the
   kernel proper as well.

 - qspinlock improvements: the locking algorithm now guarantees forward
   progress whereas the previous implementation in mainline could starve
   threads indefinitely in cmpxchg() loops. Also other related cleanups
   to the qspinlock code (Will Deacon)

 - misc smaller improvements, cleanups and fixes all across the locking
   subsystem

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
  locking/rwsem: Simplify the is-owner-spinnable checks
  tools/memory-model: Add reference for 'Simplifying ARM concurrency'
  tools/memory-model: Update ASPLOS information
  MAINTAINERS, tools/memory-model: Update e-mail address for Andrea Parri
  tools/memory-model: Fix coding style in 'lock.cat'
  tools/memory-model: Remove out-of-date comments and code from lock.cat
  tools/memory-model: Improve mixed-access checking in lock.cat
  tools/memory-model: Improve comments in lock.cat
  tools/memory-model: Remove duplicated code from lock.cat
  tools/memory-model: Flag "cumulativity" and "propagation" tests
  tools/memory-model: Add model support for spin_is_locked()
  tools/memory-model: Add scripts to test memory model
  tools/memory-model: Fix coding style in 'linux-kernel.def'
  tools/memory-model: Model 'smp_store_mb()'
  tools/memory-order: Update the cheat-sheet to show that smp_mb__after_atomic() orders later RMW operations
  tools/memory-order: Improve key for SELF and SV
  tools/memory-model: Fix cheat sheet typo
  tools/memory-model: Update required version of herdtools7
  tools/memory-model: Redefine rb in terms of rcu-fence
  tools/memory-model: Rename link and rcu-path to rcu-link and rb
  ...
2018-06-04 16:40:11 -07:00
Linus Torvalds
cf626b0da7 Merge branch 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull procfs updates from Al Viro:
 "Christoph's proc_create_... cleanups series"

* 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits)
  xfs, proc: hide unused xfs procfs helpers
  isdn/gigaset: add back gigaset_procinfo assignment
  proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields
  tty: replace ->proc_fops with ->proc_show
  ide: replace ->proc_fops with ->proc_show
  ide: remove ide_driver_proc_write
  isdn: replace ->proc_fops with ->proc_show
  atm: switch to proc_create_seq_private
  atm: simplify procfs code
  bluetooth: switch to proc_create_seq_data
  netfilter/x_tables: switch to proc_create_seq_private
  netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data
  neigh: switch to proc_create_seq_data
  hostap: switch to proc_create_{seq,single}_data
  bonding: switch to proc_create_seq_data
  rtc/proc: switch to proc_create_single_data
  drbd: switch to proc_create_single
  resource: switch to proc_create_seq_data
  staging/rtl8192u: simplify procfs code
  jfs: simplify procfs code
  ...
2018-06-04 10:00:01 -07:00
Oleg Nesterov
1b22fc609c locking/rwsem: Simplify the is-owner-spinnable checks
Add the trivial owner_on_cpu() helper for rwsem_can_spin_on_owner() and
rwsem_spin_on_owner(), it also allows to make rwsem_can_spin_on_owner()
a bit more clear.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180518165534.GA22348@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-25 08:11:47 +02:00
Ingo Molnar
675c00c332 Merge branch 'linus' into locking/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-25 08:11:28 +02:00
Waiman Long
5a817641f6 locking/percpu-rwsem: Annotate rwsem ownership transfer by setting RWSEM_OWNER_UNKNOWN
The filesystem freezing code needs to transfer ownership of a rwsem
embedded in a percpu-rwsem from the task that does the freezing to
another one that does the thawing by calling percpu_rwsem_release()
after freezing and percpu_rwsem_acquire() before thawing.

However, the new rwsem debug code runs afoul with this scheme by warning
that the task that releases the rwsem isn't the one that acquires it,
as reported by Amir Goldstein:

  DEBUG_LOCKS_WARN_ON(sem->owner != get_current())
  WARNING: CPU: 1 PID: 1401 at /home/amir/build/src/linux/kernel/locking/rwsem.c:133 up_write+0x59/0x79

  Call Trace:
   percpu_up_write+0x1f/0x28
   thaw_super_locked+0xdf/0x120
   do_vfs_ioctl+0x270/0x5f1
   ksys_ioctl+0x52/0x71
   __x64_sys_ioctl+0x16/0x19
   do_syscall_64+0x5d/0x167
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

To work properly with the rwsem debug code, we need to annotate that the
rwsem ownership is unknown during the tranfer period until a brave soul
comes forward to acquire the ownership. During that period, optimistic
spinning will be disabled.

Reported-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-3-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-16 11:45:16 +02:00
Waiman Long
d7d760efad locking/rwsem: Add a new RWSEM_ANONYMOUSLY_OWNED flag
There are use cases where a rwsem can be acquired by one task, but
released by another task. In thess cases, optimistic spinning may need
to be disabled.  One example will be the filesystem freeze/thaw code
where the task that freezes the filesystem will acquire a write lock
on a rwsem and then un-owns it before returning to userspace. Later on,
another task will come along, acquire the ownership, thaw the filesystem
and release the rwsem.

Bit 0 of the owner field was used to designate that it is a reader
owned rwsem. It is now repurposed to mean that the owner of the rwsem
is not known. If only bit 0 is set, the rwsem is reader owned. If bit
0 and other bits are set, it is writer owned with an unknown owner.
One such value for the latter case is (-1L). So we can set owner to 1 for
reader-owned, -1 for writer-owned. The owner is unknown in both cases.

To handle transfer of rwsem ownership, the higher level code should
set the owner field to -1 to indicate a write-locked rwsem with unknown
owner.  Optimistic spinning will be disabled in this case.

Once the higher level code figures who the new owner is, it can then
set the owner field accordingly.

Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-16 11:45:15 +02:00
Christoph Hellwig
3f3942aca6 proc: introduce proc_create_single{,_data}
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16 07:23:35 +02:00
Christoph Hellwig
fddda2b7b5 proc: introduce proc_create_seq{,_data}
Variants of proc_create{,_data} that directly take a struct seq_operations
argument and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16 07:23:35 +02:00
Tetsuo Handa
8cc05c71ba locking/lockdep: Move sanity check to inside lockdep_print_held_locks()
Calling lockdep_print_held_locks() on a running thread is considered unsafe.

Since all callers should follow that rule and the sanity check is not heavy,
this patch moves the sanity check to inside lockdep_print_held_locks().

As a side effect of this patch, the number of locks held by running threads
will be printed as well. This change will be preferable when we want to
know which threads might be relevant to a problem but are unable to print
any clues because that thread is running.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1523011279-8206-2-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-14 09:15:02 +02:00
Tetsuo Handa
0f736a52e4 locking/lockdep: Use for_each_process_thread() for debug_show_all_locks()
debug_show_all_locks() tries to grab the tasklist_lock for two seconds, but
calling while_each_thread() without tasklist_lock held is not safe.

See the following commit for more information:

  4449a51a7c ("vm_is_stack: use for_each_thread() rather then buggy while_each_thread()")

Change debug_show_all_locks() from "do_each_thread()/while_each_thread()
with possibility of missing tasklist_lock" to "for_each_process_thread()
with RCU", and add a call to touch_all_softlockup_watchdogs() like
show_state_filter() does.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1523011279-8206-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-14 09:15:02 +02:00
Peter Zijlstra
c427f69564 locking/mutex: Optimize __mutex_trylock_fast()
Use try_cmpxchg to avoid the pointless TEST instruction..
And add the (missing) atomic_long_try_cmpxchg*() wrappery.

On x86_64 this gives:

0000000000000710 <mutex_lock>:						0000000000000710 <mutex_lock>:
 710:   65 48 8b 14 25 00 00    mov    %gs:0x0,%rdx                      710:   65 48 8b 14 25 00 00    mov    %gs:0x0,%rdx
 717:   00 00                                                            717:   00 00
                        715: R_X86_64_32S       current_task                                    715: R_X86_64_32S       current_task
 719:   31 c0                   xor    %eax,%eax                         719:   31 c0                   xor    %eax,%eax
 71b:   f0 48 0f b1 17          lock cmpxchg %rdx,(%rdi)                 71b:   f0 48 0f b1 17          lock cmpxchg %rdx,(%rdi)
 720:   48 85 c0                test   %rax,%rax                         720:   75 02                   jne    724 <mutex_lock+0x14>
 723:   75 02                   jne    727 <mutex_lock+0x17>             722:   f3 c3                   repz retq
 725:   f3 c3                   repz retq                                724:   eb da                   jmp    700 <__mutex_lock_slowpath>
 727:   eb d7                   jmp    700 <__mutex_lock_slowpath>       726:   66 2e 0f 1f 84 00 00    nopw   %cs:0x0(%rax,%rax,1)
 729:   0f 1f 80 00 00 00 00    nopl   0x0(%rax)                         72d:   00 00 00

On ARM64 this gives:

000000000000638 <mutex_lock>:						0000000000000638 <mutex_lock>:
     638:       d5384101        mrs     x1, sp_el0                           638:       d5384101        mrs     x1, sp_el0
     63c:       d2800002        mov     x2, #0x0                             63c:       d2800002        mov     x2, #0x0
     640:       f9800011        prfm    pstl1strm, [x0]                      640:       f9800011        prfm    pstl1strm, [x0]
     644:       c85ffc03        ldaxr   x3, [x0]                             644:       c85ffc03        ldaxr   x3, [x0]
     648:       ca020064        eor     x4, x3, x2                           648:       ca020064        eor     x4, x3, x2
     64c:       b5000064        cbnz    x4, 658 <mutex_lock+0x20>            64c:       b5000064        cbnz    x4, 658 <mutex_lock+0x20>
     650:       c8047c01        stxr    w4, x1, [x0]                         650:       c8047c01        stxr    w4, x1, [x0]
     654:       35ffff84        cbnz    w4, 644 <mutex_lock+0xc>             654:       35ffff84        cbnz    w4, 644 <mutex_lock+0xc>
     658:       b40000c3        cbz     x3, 670 <mutex_lock+0x38>            658:       b5000043        cbnz    x3, 660 <mutex_lock+0x28>
     65c:       a9bf7bfd        stp     x29, x30, [sp,#-16]!                 65c:       d65f03c0        ret
     660:       910003fd        mov     x29, sp                              660:       a9bf7bfd        stp     x29, x30, [sp,#-16]!
     664:       97ffffef        bl      620 <__mutex_lock_slowpath>          664:       910003fd        mov     x29, sp
     668:       a8c17bfd        ldp     x29, x30, [sp],#16                   668:       97ffffee        bl      620 <__mutex_lock_slowpath>
     66c:       d65f03c0        ret                                          66c:       a8c17bfd        ldp     x29, x30, [sp],#16
     670:       d65f03c0        ret                                          670:       d65f03c0        ret

Reported-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-04 10:02:39 +02:00
Will Deacon
3bea9adc96 locking/qspinlock: Remove duplicate clear_pending() function from PV code
The native clear_pending() function is identical to the PV version, so the
latter can simply be removed.

This fixes the build for systems with >= 16K CPUs using the PV lock implementation.

Reported-by: Waiman Long <longman@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/20180427101619.GB21705@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27 12:55:22 +02:00
Waiman Long
81d3dc9a34 locking/qspinlock: Add stat tracking for pending vs. slowpath
Currently, the qspinlock_stat code tracks only statistical counts in the
PV qspinlock code. However, it may also be useful to track the number
of locking operations done via the pending code vs. the MCS lock queue
slowpath for the non-PV case.

The qspinlock stat code is modified to do that. The stat counter
pv_lock_slowpath is renamed to lock_slowpath so that it can be used by
both the PV and non-PV cases.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1524738868-31318-14-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27 09:48:53 +02:00
Will Deacon
ae75d9089f locking/qspinlock: Use try_cmpxchg() instead of cmpxchg() when locking
When reaching the head of an uncontended queue on the qspinlock slow-path,
using a try_cmpxchg() instead of a cmpxchg() operation to transition the
lock work to _Q_LOCKED_VAL generates slightly better code for x86 and
pretty much identical code for arm64.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-13-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27 09:48:52 +02:00
Will Deacon
9d4646d14d locking/qspinlock: Elide back-to-back RELEASE operations with smp_wmb()
The qspinlock slowpath must ensure that the MCS node is fully initialised
before it can be reached by another other CPU. This is currently enforced
by using a RELEASE operation when updating the tail and also when linking
the node into the waitqueue, since the control dependency off xchg_tail
is insufficient to enforce sufficient ordering, see:

  95bcade33a ("locking/qspinlock: Ensure node is initialised before updating prev->next")

Back-to-back RELEASE operations may be expensive on some architectures,
particularly those that implement them using fences under the hood. We
can replace the two RELEASE operations with a single smp_wmb() fence and
use RELAXED operations for the subsequent publishing of the node.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-12-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27 09:48:52 +02:00
Will Deacon
c131a198c4 locking/qspinlock: Use smp_cond_load_relaxed() to wait for next node
When a locker reaches the head of the queue and takes the lock, a
concurrent locker may enqueue and force the lock holder to spin
whilst its node->next field is initialised. Rather than open-code
a READ_ONCE/cpu_relax() loop, this can be implemented using
smp_cond_load_relaxed() instead.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-10-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27 09:48:50 +02:00
Jason Low
7f56b58a92 locking/mcs: Use smp_cond_load_acquire() in MCS spin loop
For qspinlocks on ARM64, we would like to use WFE instead
of purely spinning. Qspinlocks internally have lock
contenders spin on an MCS lock.

Update arch_mcs_spin_lock_contended() such that it uses
the new smp_cond_load_acquire() so that ARM64 can also
override this spin loop with its own implementation using WFE.

On x86, this can also be cheaper than spinning on
smp_load_acquire().

Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-9-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27 09:48:49 +02:00
Will Deacon
f9c811fac4 locking/qspinlock: Use atomic_cond_read_acquire()
Rather than dig into the counter field of the atomic_t inside the
qspinlock structure so that we can call smp_cond_load_acquire(), use
atomic_cond_read_acquire() instead, which operates on the atomic_t
directly.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-8-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27 09:48:49 +02:00
Will Deacon
c61da58d8a locking/qspinlock: Kill cmpxchg() loop when claiming lock from head of queue
When a queued locker reaches the head of the queue, it claims the lock
by setting _Q_LOCKED_VAL in the lockword. If there isn't contention, it
must also clear the tail as part of this operation so that subsequent
lockers can avoid taking the slowpath altogether.

Currently this is expressed as a cmpxchg() loop that practically only
runs up to two iterations. This is confusing to the reader and unhelpful
to the compiler. Rewrite the cmpxchg() loop without the loop, so that a
failed cmpxchg() implies that there is contention and we just need to
write to _Q_LOCKED_VAL without considering the rest of the lockword.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-7-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27 09:48:48 +02:00
Will Deacon
59fb586b4a locking/qspinlock: Remove unbounded cmpxchg() loop from locking slowpath
The qspinlock locking slowpath utilises a "pending" bit as a simple form
of an embedded test-and-set lock that can avoid the overhead of explicit
queuing in cases where the lock is held but uncontended. This bit is
managed using a cmpxchg() loop which tries to transition the uncontended
lock word from (0,0,0) -> (0,0,1) or (0,0,1) -> (0,1,1).

Unfortunately, the cmpxchg() loop is unbounded and lockers can be starved
indefinitely if the lock word is seen to oscillate between unlocked
(0,0,0) and locked (0,0,1). This could happen if concurrent lockers are
able to take the lock in the cmpxchg() loop without queuing and pass it
around amongst themselves.

This patch fixes the problem by unconditionally setting _Q_PENDING_VAL
using atomic_fetch_or, and then inspecting the old value to see whether
we need to spin on the current lock owner, or whether we now effectively
hold the lock. The tricky scenario is when concurrent lockers end up
queuing on the lock and the lock becomes available, causing us to see
a lockword of (n,0,0). With pending now set, simply queuing could lead
to deadlock as the head of the queue may not have observed the pending
flag being cleared. Conversely, if the head of the queue did observe
pending being cleared, then it could transition the lock from (n,0,0) ->
(0,0,1) meaning that any attempt to "undo" our setting of the pending
bit could race with a concurrent locker trying to set it.

We handle this race by preserving the pending bit when taking the lock
after reaching the head of the queue and leaving the tail entry intact
if we saw pending set, because we know that the tail is going to be
updated shortly.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-6-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27 09:48:47 +02:00
Will Deacon
6512276d97 locking/qspinlock: Bound spinning on pending->locked transition in slowpath
If a locker taking the qspinlock slowpath reads a lock value indicating
that only the pending bit is set, then it will spin whilst the
concurrent pending->locked transition takes effect.

Unfortunately, there is no guarantee that such a transition will ever be
observed since concurrent lockers could continuously set pending and
hand over the lock amongst themselves, leading to starvation. Whilst
this would probably resolve in practice, it means that it is not
possible to prove liveness properties about the lock and means that lock
acquisition time is unbounded.

Rather than removing the pending->locked spinning from the slowpath
altogether (which has been shown to heavily penalise a 2-threaded
locking stress test on x86), this patch replaces the explicit spinning
with a call to atomic_cond_read_relaxed and allows the architecture to
provide a bound on the number of spins. For architectures that can
respond to changes in cacheline state in their smp_cond_load implementation,
it should be sufficient to use the default bound of 1.

Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27 09:48:46 +02:00
Will Deacon
625e88be1f locking/qspinlock: Merge 'struct __qspinlock' into 'struct qspinlock'
'struct __qspinlock' provides a handy union of fields so that
subcomponents of the lockword can be accessed by name, without having to
manage shifts and masks explicitly and take endianness into account.

This is useful in qspinlock.h and also potentially in arch headers, so
move the 'struct __qspinlock' into 'struct qspinlock' and kill the extra
definition.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1524738868-31318-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27 09:48:45 +02:00
Waiman Long
5149cbac42 locking/rwsem: Add DEBUG_RWSEMS to look for lock/unlock mismatches
For a rwsem, locking can either be exclusive or shared. The corresponding
exclusive or shared unlock must be used. Otherwise, the protected data
structures may get corrupted or the lock may be in an inconsistent state.

In order to detect such anomaly, a new configuration option DEBUG_RWSEMS
is added which can be enabled to look for such mismatches and print
warnings that that happens.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1522445280-7767-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-31 07:30:50 +02:00
Ingo Molnar
169310f71f Merge branch 'linus' into locking/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-31 07:30:17 +02:00
Tetsuo Handa
b3c39758c8 lockdep: Make the lock debug output more useful
The lock debug output in print_lock() has a few shortcomings:

 - It prints the hlock->acquire_ip field in %px and %pS format. That's
   redundant information.

 - It lacks information about the lock object itself. The lock class is
   not helpful to identify a particular instance of a lock.

Change the output so it prints:

 - hlock->instance to allow identification of a particular lock instance.

 - only the %pS format of hlock->ip_acquire which is sufficient to decode
   the actual code line with faddr2line.

The resulting output is:

3 locks held by a.out/31106:
#0: 00000000b0f753ba (&mm->mmap_sem){++++}, at: copy_process.part.41+0x10d5/0x1fe0
#1: 00000000ef64d539 (&mm->mmap_sem/1){+.+.}, at: copy_process.part.41+0x10fe/0x1fe0
#2: 00000000b41a282e (&mapping->i_mmap_rwsem){++++}, at: copy_process.part.41+0x12f2/0x1fe0

[ tglx: Massaged changelog ]

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: linux-mm@kvack.org
Cc: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/201803271941.GBE57310.tVSOJLQOFFOHFM@I-love.SAKURA.ne.jp
2018-03-29 14:41:40 +02:00
Peter Zijlstra
c28d62cf52 locking/rtmutex: Handle non enqueued waiters gracefully in remove_waiter()
In -RT task_blocks_on_rt_mutex() may return with -EAGAIN due to
(->pi_blocked_on == PI_WAKEUP_INPROGRESS) before it added itself as a
waiter. In such a case remove_waiter() must not be called because without a
waiter it will trigger the BUG_ON() statement.

This was initially reported by Yimin Deng. Thomas Gleixner fixed it then
with an explicit check for waiters before calling remove_waiter().

Instead of an explicit NULL check before calling rt_mutex_top_waiter() make
the function return NULL if there are no waiters. With that fixed the now
pointless NULL check is removed from rt_mutex_slowlock().

Reported-and-debugged-by: Yimin Deng <yimin11.deng@gmail.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/CAAh1qt=DCL9aUXNxanP5BKtiPp3m+qj4yB+gDohhXPVFCxWwzg@mail.gmail.com
Link: https://lkml.kernel.org/r/20180327121438.sss7hxg3crqy4ecd@linutronix.de
2018-03-28 23:01:30 +02:00
Matthew Wilcox
45dbac0e28 locking/mutex: Improve documentation
On Wed, Mar 14, 2018 at 01:56:31PM -0700, Andrew Morton wrote:

> My memory is weak and our documentation is awful.  What does
> mutex_lock_killable() actually do and how does it differ from
> mutex_lock_interruptible()?

Add kernel-doc for mutex_lock_killable() and mutex_lock_io().  Reword the
kernel-doc for mutex_lock_interruptible().

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: cl@linux.com
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/20180315115812.GA9949@bombadil.infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 08:07:41 +01:00
Ingo Molnar
9884afa2fd Linux 4.16-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlqlyPEeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGNa0H/RIa/StQuYu/SBwa
 JRqQFmkIsx+gG+FyamJrqGzRfyjounES8PbfyaN3cCrzYgeRwMp1U/bZW6/l5tkb
 OjTtrCJ6CJaa21fC/7aqn3rhejHciKyk83EinMu5WjDpsQcaF2xKr3SaPa62Ja24
 fhawKq3CnUa+OUuAbicVX8yn4viUB6x8FjSN/IWfp3Cs4IBR7SGxxD7A4MET9FbQ
 5OOu0al8ly9QeCggTtJyk+cApeLfexEBTbUur9gm7GcH9jhUtJSyZCZsDJx6M2yb
 CwdgF4fyk58c1fuHvTFb0AdUns55ba3nicybRHHMVbDpZIG9v4/M1yJETHHf5cD7
 t3rFjrY=
 =+Ldf
 -----END PGP SIGNATURE-----

Merge tag 'v4.16-rc5' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12 12:14:57 +01:00
Boqun Feng
6b0ef92fee rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites
When running rcutorture with TREE03 config, CONFIG_PROVE_LOCKING=y, and
kernel cmdline argument "rcutorture.gp_exp=1", lockdep reports a
HARDIRQ-safe->HARDIRQ-unsafe deadlock:

 ================================
 WARNING: inconsistent lock state
 4.16.0-rc4+ #1 Not tainted
 --------------------------------
 inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
 takes:
 __schedule+0xbe/0xaf0
 {IN-HARDIRQ-W} state was registered at:
   _raw_spin_lock+0x2a/0x40
   scheduler_tick+0x47/0xf0
...
 other info that might help us debug this:
  Possible unsafe locking scenario:
        CPU0
        ----
   lock(&rq->lock);
   <Interrupt>
     lock(&rq->lock);
  *** DEADLOCK ***
 1 lock held by rcu_torture_rea/724:
 rcu_torture_read_lock+0x0/0x70
 stack backtrace:
 CPU: 2 PID: 724 Comm: rcu_torture_rea Not tainted 4.16.0-rc4+ #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
 Call Trace:
  lock_acquire+0x90/0x200
  ? __schedule+0xbe/0xaf0
  _raw_spin_lock+0x2a/0x40
  ? __schedule+0xbe/0xaf0
  __schedule+0xbe/0xaf0
  preempt_schedule_irq+0x2f/0x60
  retint_kernel+0x1b/0x2d
 RIP: 0010:rcu_read_unlock_special+0x0/0x680
  ? rcu_torture_read_unlock+0x60/0x60
  __rcu_read_unlock+0x64/0x70
  rcu_torture_read_unlock+0x17/0x60
  rcu_torture_reader+0x275/0x450
  ? rcutorture_booster_init+0x110/0x110
  ? rcu_torture_stall+0x230/0x230
  ? kthread+0x10e/0x130
  kthread+0x10e/0x130
  ? kthread_create_worker_on_cpu+0x70/0x70
  ? call_usermodehelper_exec_async+0x11a/0x150
  ret_from_fork+0x3a/0x50

This happens with the following even sequence:

	preempt_schedule_irq();
	  local_irq_enable();
	  __schedule():
	    local_irq_disable(); // irq off
	    ...
	    rcu_note_context_switch():
	      rcu_note_preempt_context_switch():
	        rcu_read_unlock_special():
	          local_irq_save(flags);
	          ...
		  raw_spin_unlock_irqrestore(...,flags); // irq remains off
	          rt_mutex_futex_unlock():
	            raw_spin_lock_irq();
	            ...
	            raw_spin_unlock_irq(); // accidentally set irq on

	    <return to __schedule()>
	    rq_lock():
	      raw_spin_lock(); // acquiring rq->lock with irq on

which means rq->lock becomes a HARDIRQ-unsafe lock, which can cause
deadlocks in scheduler code.

This problem was introduced by commit 02a7c234e5 ("rcu: Suppress
lockdep false-positive ->boost_mtx complaints"). That brought the user
of rt_mutex_futex_unlock() with irq off.

To fix this, replace the *lock_irq() in rt_mutex_futex_unlock() with
*lock_irq{save,restore}() to make it safe to call rt_mutex_futex_unlock()
with irq off.

Fixes: 02a7c234e5 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints")
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20180309065630.8283-1-boqun.feng@gmail.com
2018-03-09 11:06:16 +01:00
Borislav Petkov
04860d48a8 locking/lockdep: Show unadorned pointers
Show unadorned pointers in lockdep reports - lockdep is a debugging
facility and hashing pointers there doesn't make a whole lotta sense.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20180226134926.23069-1-bp@alien8.de
2018-02-28 15:25:44 +01:00
Will Deacon
11dc13224c locking/qspinlock: Ensure node->count is updated before initialising node
When queuing on the qspinlock, the count field for the current CPU's head
node is incremented. This needn't be atomic because locking in e.g. IRQ
context is balanced and so an IRQ will return with node->count as it
found it.

However, the compiler could in theory reorder the initialisation of
node[idx] before the increment of the head node->count, causing an
IRQ to overwrite the initialised node and potentially corrupt the lock
state.

Avoid the potential for this harmful compiler reordering by placing a
barrier() between the increment of the head node->count and the subsequent
node initialisation.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1518528177-19169-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-13 14:50:14 +01:00
Will Deacon
95bcade33a locking/qspinlock: Ensure node is initialised before updating prev->next
When a locker ends up queuing on the qspinlock locking slowpath, we
initialise the relevant mcs node and publish it indirectly by updating
the tail portion of the lock word using xchg_tail. If we find that there
was a pre-existing locker in the queue, we subsequently update their
->next field to point at our node so that we are notified when it's our
turn to take the lock.

This can be roughly illustrated as follows:

  /* Initialise the fields in node and encode a pointer to node in tail */
  tail = initialise_node(node);

  /*
   * Exchange tail into the lockword using an atomic read-modify-write
   * operation with release semantics
   */
  old = xchg_tail(lock, tail);

  /* If there was a pre-existing waiter ... */
  if (old & _Q_TAIL_MASK) {
	prev = decode_tail(old);
	smp_read_barrier_depends();

	/* ... then update their ->next field to point to node.
	WRITE_ONCE(prev->next, node);
  }

The conditional update of prev->next therefore relies on the address
dependency from the result of xchg_tail ensuring order against the
prior initialisation of node. However, since the release semantics of
the xchg_tail operation apply only to the write portion of the RmW,
then this ordering is not guaranteed and it is possible for the CPU
to return old before the writes to node have been published, consequently
allowing us to point prev->next to an uninitialised node.

This patch fixes the problem by making the update of prev->next a RELEASE
operation, which also removes the reliance on dependency ordering.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1518528177-19169-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-13 14:50:14 +01:00
Linus Torvalds
5e7481a25e Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
 "The main changes relate to making lock_is_held() et al (and external
  wrappers of them) work on const data types - this requires const
  propagation through the depths of lockdep.

  This removes a number of ugly type hacks the external helpers used"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Convert some users to const
  lockdep: Make lockdep checking constant
  lockdep: Assign lock keys on registration
2018-01-30 10:44:56 -08:00
Linus Torvalds
d772794637 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main RCU changes in this cycle were:

   - Updates to use cond_resched() instead of cond_resched_rcu_qs()
     where feasible (currently everywhere except in kernel/rcu and in
     kernel/torture.c). Also a couple of fixes to avoid sending IPIs to
     offline CPUs.

   - Updates to simplify RCU's dyntick-idle handling.

   - Updates to remove almost all uses of smp_read_barrier_depends() and
     read_barrier_depends().

   - Torture-test updates.

   - Miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
  torture: Save a line in stutter_wait(): while -> for
  torture: Eliminate torture_runnable and perf_runnable
  torture: Make stutter less vulnerable to compilers and races
  locking/locktorture: Fix num reader/writer corner cases
  locking/locktorture: Fix rwsem reader_delay
  torture: Place all torture-test modules in one MAINTAINERS group
  rcutorture/kvm-build.sh: Skip build directory check
  rcutorture: Simplify functions.sh include path
  rcutorture: Simplify logging
  rcutorture/kvm-recheck-*: Improve result directory readability check
  rcutorture/kvm.sh: Support execution from any directory
  rcutorture/kvm.sh: Use consistent help text for --qemu-args
  rcutorture/kvm.sh: Remove unused variable, `alldone`
  rcutorture: Remove unused script, config2frag.sh
  rcutorture/configinit: Fix build directory error message
  rcutorture: Preempt RCU-preempt readers more vigorously
  torture: Reduce #ifdefs for preempt_schedule()
  rcu: Remove have_rcu_nocb_mask from tree_plugin.h
  rcu: Add comment giving debug strategy for double call_rcu()
  tracing, rcu: Hide trace event rcu_nocb_wake when not used
  ...
2018-01-30 10:15:30 -08:00
Tejun Heo
88f1c87de1 locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks()
debug_show_all_locks() iterates all tasks and print held locks whole
holding tasklist_lock.  This can take a while on a slow console device
and may end up triggering NMI hardlockup detector if someone else ends
up waiting for tasklist_lock.

Touch the NMI watchdog while printing the held locks to avoid
spuriously triggering the hardlockup detector.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20180122220055.GB1771050@devbig577.frc2.facebook.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-24 10:00:09 +01:00
Matthew Wilcox
08f36ff642 lockdep: Make lockdep checking constant
There are several places in the kernel which would like to pass a const
pointer to lockdep_is_held().  Constify the entire path so nobody has to
trick the compiler.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Link: https://lkml.kernel.org/r/20180117151414.23686-3-willy@infradead.org
2018-01-18 11:56:48 +01:00
Matthew Wilcox
64f29d1bc9 lockdep: Assign lock keys on registration
Lockdep is assigning lock keys when a lock was looked up.  This is
unnecessary; if the lock has never been registered then it is known that it
is not locked.  It also complicates the calling convention.  Switch to
assigning the lock key in register_lock_class().

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Link: https://lkml.kernel.org/r/20180117151414.23686-2-willy@infradead.org
2018-01-18 11:56:48 +01:00
Peter Zijlstra
c1e2f0eaf0 futex: Avoid violating the 10th rule of futex
Julia reported futex state corruption in the following scenario:

   waiter                                  waker                                            stealer (prio > waiter)

   futex(WAIT_REQUEUE_PI, uaddr, uaddr2,
         timeout=[N ms])
      futex_wait_requeue_pi()
         futex_wait_queue_me()
            freezable_schedule()
            <scheduled out>
                                           futex(LOCK_PI, uaddr2)
                                           futex(CMP_REQUEUE_PI, uaddr,
                                                 uaddr2, 1, 0)
                                              /* requeues waiter to uaddr2 */
                                           futex(UNLOCK_PI, uaddr2)
                                                 wake_futex_pi()
                                                    cmp_futex_value_locked(uaddr2, waiter)
                                                    wake_up_q()
           <woken by waker>
           <hrtimer_wakeup() fires,
            clears sleeper->task>
                                                                                           futex(LOCK_PI, uaddr2)
                                                                                              __rt_mutex_start_proxy_lock()
                                                                                                 try_to_take_rt_mutex() /* steals lock */
                                                                                                    rt_mutex_set_owner(lock, stealer)
                                                                                              <preempted>
         <scheduled in>
         rt_mutex_wait_proxy_lock()
            __rt_mutex_slowlock()
               try_to_take_rt_mutex() /* fails, lock held by stealer */
               if (timeout && !timeout->task)
                  return -ETIMEDOUT;
            fixup_owner()
               /* lock wasn't acquired, so,
                  fixup_pi_state_owner skipped */

   return -ETIMEDOUT;

   /* At this point, we've returned -ETIMEDOUT to userspace, but the
    * futex word shows waiter to be the owner, and the pi_mutex has
    * stealer as the owner */

   futex_lock(LOCK_PI, uaddr2)
     -> bails with EDEADLK, futex word says we're owner.

And suggested that what commit:

  73d786bd04 ("futex: Rework inconsistent rt_mutex/futex_q state")

removes from fixup_owner() looks to be just what is needed. And indeed
it is -- I completely missed that requeue_pi could also result in this
case. So we need to restore that, except that subsequent patches, like
commit:

  16ffa12d74 ("futex: Pull rt_mutex_futex_unlock() out from under hb->lock")

changed all the locking rules. Even without that, the sequence:

-               if (rt_mutex_futex_trylock(&q->pi_state->pi_mutex)) {
-                       locked = 1;
-                       goto out;
-               }

-               raw_spin_lock_irq(&q->pi_state->pi_mutex.wait_lock);
-               owner = rt_mutex_owner(&q->pi_state->pi_mutex);
-               if (!owner)
-                       owner = rt_mutex_next_owner(&q->pi_state->pi_mutex);
-               raw_spin_unlock_irq(&q->pi_state->pi_mutex.wait_lock);
-               ret = fixup_pi_state_owner(uaddr, q, owner);

already suggests there were races; otherwise we'd never have to look
at next_owner.

So instead of doing 3 consecutive wait_lock sections with who knows
what races, we do it all in a single section. Additionally, the usage
of pi_state->owner in fixup_owner() was only safe because only the
rt_mutex owner would modify it, which this additional case wrecks.

Luckily the values can only change away and not to the value we're
testing, this means we can do a speculative test and double check once
we have the wait_lock.

Fixes: 73d786bd04 ("futex: Rework inconsistent rt_mutex/futex_q state")
Reported-by: Julia Cartwright <julia@ni.com>
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Julia Cartwright <julia@ni.com>
Tested-by: Gratian Crisan <gratian.crisan@ni.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171208124939.7livp7no2ov65rrc@hirez.programming.kicks-ass.net
2018-01-14 18:49:16 +01:00
Ingo Molnar
475c5ee193 Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:

- Updates to use cond_resched() instead of cond_resched_rcu_qs()
  where feasible (currently everywhere except in kernel/rcu and
  in kernel/torture.c).  Also a couple of fixes to avoid sending
  IPIs to offline CPUs.

- Updates to simplify RCU's dyntick-idle handling.

- Updates to remove almost all uses of smp_read_barrier_depends()
  and read_barrier_depends().

- Miscellaneous fixes.

- Torture-test updates.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-03 14:14:18 +01:00
Ingo Molnar
e966eaeeb6 locking/lockdep: Remove the cross-release locking checks
This code (CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y),
while it found a number of old bugs initially, was also causing too many
false positives that caused people to disable lockdep - which is arguably
a worse overall outcome.

If we disable cross-release by default but keep the code upstream then
in practice the most likely outcome is that we'll allow the situation
to degrade gradually, by allowing entropy to introduce more and more
false positives, until it overwhelms maintenance capacity.

Another bad side effect was that people were trying to work around
the false positives by uglifying/complicating unrelated code. There's
a marked difference between annotating locking operations and
uglifying good code just due to bad lock debugging code ...

This gradual decrease in quality happened to a number of debugging
facilities in the kernel, and lockdep is pretty complex already,
so we cannot risk this outcome.

Either cross-release checking can be done right with no false positives,
or it should not be included in the upstream kernel.

( Note that it might make sense to maintain it out of tree and go through
  the false positives every now and then and see whether new bugs were
  introduced. )

Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-12 12:38:51 +01:00
Will Deacon
d89c70356a locking/core: Remove break_lock field when CONFIG_GENERIC_LOCKBREAK=y
When CONFIG_GENERIC_LOCKBEAK=y, locking structures grow an extra int ->break_lock
field which is used to implement raw_spin_is_contended() by setting the field
to 1 when waiting on a lock and clearing it to zero when holding a lock.
However, there are a few problems with this approach:

  - There is a write-write race between a CPU successfully taking the lock
    (and subsequently writing break_lock = 0) and a waiter waiting on
    the lock (and subsequently writing break_lock = 1). This could result
    in a contended lock being reported as uncontended and vice-versa.

  - On machines with store buffers, nothing guarantees that the writes
    to break_lock are visible to other CPUs at any particular time.

  - READ_ONCE/WRITE_ONCE are not used, so the field is potentially
    susceptible to harmful compiler optimisations,

Consequently, the usefulness of this field is unclear and we'd be better off
removing it and allowing architectures to implement raw_spin_is_contended() by
providing a definition of arch_spin_is_contended(), as they can when
CONFIG_GENERIC_LOCKBREAK=n.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1511894539-7988-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-12 11:24:01 +01:00
Will Deacon
f87f3a328d locking/core: Fix deadlock during boot on systems with GENERIC_LOCKBREAK
Commit:

  a8a217c221 ("locking/core: Remove {read,spin,write}_can_lock()")

removed the definition of raw_spin_can_lock(), causing the GENERIC_LOCKBREAK
spin_lock() routines to poll the ->break_lock field when waiting on a lock.

This has been reported to cause a deadlock during boot on s390, because
the ->break_lock field is also set by the waiters, and can potentially
remain set indefinitely if no other CPUs come in to take the lock after
it has been released.

This patch removes the explicit spinning on ->break_lock from the waiters,
instead relying on the outer trylock() operation to determine when the
lock is available.

Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: a8a217c221 ("locking/core: Remove {read,spin,write}_can_lock()")
Link: http://lkml.kernel.org/r/1511894539-7988-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-12 11:24:01 +01:00
Paul E. McKenney
1dfa55e019 Merge branches 'cond_resched.2017.12.04a', 'dyntick.2017.11.28a', 'fixes.2017.12.11a', 'srbd.2017.12.05a' and 'torture.2017.12.11a' into HEAD
cond_resched.2017.12.04a: Convert cond_resched_rcu_qs() to cond_resched()
dyntick.2017.11.28a: Make RCU dynticks handle interrupts from NMI
fixes.2017.12.11a: Miscellaneous fixes
srbd.2017.12.05a: Remove now-redundant smp_read_barrier_depends()
torture.2017.12.11a: Torture-testing update
2017-12-11 09:21:58 -08:00
Paul E. McKenney
a2f2577d96 torture: Eliminate torture_runnable and perf_runnable
The purpose of torture_runnable is to allow rcutorture and locktorture
to be started and stopped via sysfs when they are built into the kernel
(as in not compiled as loadable modules).  However, the 0444 permissions
for both instances of torture_runnable prevent this use case from ever
being put into practice.  Given that there have been no complaints
about this deficiency, it is reasonable to conclude that no one actually
makes use of this sysfs capability.  The perf_runnable module parameter
for rcuperf is in the same situation.

This commit therefore removes both torture_runnable instances as well
as perf_runnable.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:29 -08:00
Davidlohr Bueso
2ce77d16db locking/locktorture: Fix num reader/writer corner cases
Things can explode for locktorture if the user does combinations
of nwriters_stress=0 nreaders_stress=0. Fix this by not assuming
we always want to torture writer threads.

Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
2017-12-11 09:18:28 -08:00