The KVM RISC-V allows vector crypto extensions for Guest/VM so let us
add these extensions to get-reg-list test. This includes extensions
Zvbb, Zvbc, Zvkb, Zvkg, Zvkned, Zvknha, Zvknhb, Zvksed, Zvksh, and Zvkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The KVM RISC-V allows scaler crypto extensions for Guest/VM so let us
add these extensions to get-reg-list test. This includes extensions
Zbkb, Zbkc, Zbkx, Zknd, Zkne, Zknh, Zkr, Zksed, Zksh, and Zkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The KVM RISC-V allows Zbc extension for Guest/VM so let us add
this extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Previous releases - regressions:
- Revert "net: rtnetlink: Enslave device before bringing it up",
breaks the case inverse to the one it was trying to fix
- net: dsa: fix oob access in DSA's netdevice event handler
dereference netdev_priv() before check its a DSA port
- sched: track device in tcf_block_get/put_ext() only for clsact
binder types
- net: tls, fix WARNING in __sk_msg_free when record becomes full
during splice and MORE hint set
- sfp-bus: fix SFP mode detect from bitrate
- drv: stmmac: prevent DSA tags from breaking COE
Previous releases - always broken:
- bpf: fix no forward progress in in bpf_iter_udp if output
buffer is too small
- bpf: reject variable offset alu on registers with a type
of PTR_TO_FLOW_KEYS to prevent oob access
- netfilter: tighten input validation
- net: add more sanity check in virtio_net_hdr_to_skb()
- rxrpc: fix use of Don't Fragment flag on RESPONSE packets,
avoid infinite loop
- amt: do not use the portion of skb->cb area which may get clobbered
- mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option
Misc:
- spring cleanup of inactive maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YhQQ
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Previous releases - regressions:
- Revert "net: rtnetlink: Enslave device before bringing it up",
breaks the case inverse to the one it was trying to fix
- net: dsa: fix oob access in DSA's netdevice event handler
dereference netdev_priv() before check its a DSA port
- sched: track device in tcf_block_get/put_ext() only for clsact
binder types
- net: tls, fix WARNING in __sk_msg_free when record becomes full
during splice and MORE hint set
- sfp-bus: fix SFP mode detect from bitrate
- drv: stmmac: prevent DSA tags from breaking COE
Previous releases - always broken:
- bpf: fix no forward progress in in bpf_iter_udp if output buffer is
too small
- bpf: reject variable offset alu on registers with a type of
PTR_TO_FLOW_KEYS to prevent oob access
- netfilter: tighten input validation
- net: add more sanity check in virtio_net_hdr_to_skb()
- rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid
infinite loop
- amt: do not use the portion of skb->cb area which may get clobbered
- mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
i40e: Include types.h to some headers
ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes
selftests: mlxsw: qos_pfc: Remove wrong description
mlxsw: spectrum_router: Register netdevice notifier before nexthop
mlxsw: spectrum_acl_tcam: Fix stack corruption
mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path
mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure
ethtool: netlink: Add missing ethnl_ops_begin/complete
selftests: bonding: Add more missing config options
selftests: netdevsim: add a config file
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
ipvs: avoid stat macros calls from preemptible context
netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
netfilter: nf_tables: skip dead set elements in netlink dump
netfilter: nf_tables: do not allow mismatch field size and set key length
...
- Add support for parsing the Coherent Device Attribute Table (CDAT)
- Add support for calculating a platform CXL QoS class from CDAT data
- Unify the tracing of EFI CXL Events with native CXL Events.
- Add Get Timestamp support
- Miscellaneous cleanups and fixups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZaHVvAAKCRDfioYZHlFs
Z3sCAQDPHSsHmj845k4lvKbWjys3eh78MKKEFyTXLQgYhOlsGAEAigQY2ZiSum52
nwdIgpOOADNt0Iq6yXuLsmn9xvY9bAU=
=HjCl
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"The bulk of this update is support for enumerating the performance
capabilities of CXL memory targets and connecting that to a platform
CXL memory QoS class. Some follow-on work remains to hook up this data
into core-mm policy, but that is saved for v6.9.
The next significant update is unifying how CXL event records (things
like background scrub errors) are processed between so called
"firmware first" and native error record retrieval. The CXL driver
handler that processes the record retrieved from the device mailbox is
now the handler for that same record format coming from an EFI/ACPI
notification source.
This also contains miscellaneous feature updates, like Get Timestamp,
and other fixups.
Summary:
- Add support for parsing the Coherent Device Attribute Table (CDAT)
- Add support for calculating a platform CXL QoS class from CDAT data
- Unify the tracing of EFI CXL Events with native CXL Events.
- Add Get Timestamp support
- Miscellaneous cleanups and fixups"
* tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits)
cxl/core: use sysfs_emit() for attr's _show()
cxl/pci: Register for and process CPER events
PCI: Introduce cleanup helpers for device reference counts and locks
acpi/ghes: Process CXL Component Events
cxl/events: Create a CXL event union
cxl/events: Separate UUID from event structures
cxl/events: Remove passing a UUID to known event traces
cxl/events: Create common event UUID defines
cxl/events: Promote CXL event structures to a core header
cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe()
cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge()
cxl: Fix device reference leak in cxl_port_perf_data_calculate()
cxl: Convert find_cxl_root() to return a 'struct cxl_root *'
cxl: Introduce put_cxl_root() helper
cxl/port: Fix missing target list lock
cxl/port: Fix decoder initialization when nr_targets > interleave_ways
cxl/region: fix x9 interleave typo
cxl/trace: Pass UUID explicitly to event traces
cxl/region: use %pap format to print resource_size_t
cxl/region: Add dev_dbg() detail on failure to allocate HPA space
...
This brings the first of three planned user IO page table invalidation
operations:
- IOMMU_HWPT_INVALIDATE allows invalidating the IOTLB integrated into the
iommu itself. The Intel implementation will also generate an ATC
invalidation to flush the device IOTLB as it unambiguously knows the
device, but other HW will not.
It goes along with the prior PR to implement userspace IO page tables (aka
nested translation for VMs) to allow Intel to have full functionality for
simple cases. An Intel implementation of the operation is provided.
Fix a small bug in the selftest mock iommu driver probe.
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZaFiRQAKCRCFwuHvBreF
YbmgAP9Z0+cAUPKxUKaMRls8YR+gmaOCniSkqBlyrxcib+F/WAD2NPLcBPBRk2o7
GfXPIrovx96Btf8M40AFdiTEp7LABw==
=9POe
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This brings the first of three planned user IO page table invalidation
operations:
- IOMMU_HWPT_INVALIDATE allows invalidating the IOTLB integrated into
the iommu itself. The Intel implementation will also generate an
ATC invalidation to flush the device IOTLB as it unambiguously
knows the device, but other HW will not.
It goes along with the prior PR to implement userspace IO page tables
(aka nested translation for VMs) to allow Intel to have full
functionality for simple cases. An Intel implementation of the
operation is provided.
Also fix a small bug in the selftest mock iommu driver probe"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check the bus type during probe
iommu/vt-d: Add iotlb flush for nested domain
iommufd: Add data structure for Intel VT-d stage-1 cache invalidation
iommufd/selftest: Add coverage for IOMMU_HWPT_INVALIDATE ioctl
iommufd/selftest: Add IOMMU_TEST_OP_MD_CHECK_IOTLB test op
iommufd/selftest: Add mock_domain_cache_invalidate_user support
iommu: Add iommu_copy_struct_from_user_array helper
iommufd: Add IOMMU_HWPT_INVALIDATE
iommu: Add cache_invalidate_user op
- Allow kernel trace instance creation to specify what events are created
Inside the kernel, a subsystem may create a tracing instance that it can
use to send events to user space. This sub-system may not care about the
thousands of events that exist in eventfs. Allow the sub-system to specify
what sub-systems of events it cares about, and only those events are exposed
to this instance.
- Allow the ring buffer to be broken up into bigger sub-buffers than just the
architecture page size. A new tracefs file called "buffer_subbuf_size_kb"
is created. The user can now specify a minimum size the sub-buffer may be
in kilobytes. Note, that the implementation currently make the sub-buffer
size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user only writes in
kilobyte size, and the sub-buffer will be updated to the next size that
it will can accommodate it. If the user writes in 10, it will change the
size to be 4 pages on x86 (16K), as that is the next available size that
can hold 10K pages.
- Update the debug output when a corrupt time is detected in the ring buffer.
If the ring buffer detects inconsistent timestamps, there's a debug config
options that will dump the contents of the meta data of the sub-buffer that
is used for debugging. Add some more information to this dump that helps
with debugging.
- Add more timestamp debugging checks (only triggers when the config is enabled)
- Increase the trace_seq iterator to 2 page sizes.
- Allow strings written into tracefs_marker to be larger. Up to just under
2 page sizes (based on what trace_seq can hold).
- Increase the trace_maker_raw write to be as big as a sub-buffer can hold.
- Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has been
removed.
- More selftests were added.
- Some code clean ups as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZZ8p3BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6ql2GAQDZg/zlFEiJHyTfWbCIE8pA3T5xbzKo
26TNxIZAxJJZpQEAvGFU5Smy14pG6soEoVMp8B6ZOANbqU8VVamhOL+r+Qw=
=0OYG
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Allow kernel trace instance creation to specify what events are
created
Inside the kernel, a subsystem may create a tracing instance that it
can use to send events to user space. This sub-system may not care
about the thousands of events that exist in eventfs. Allow the
sub-system to specify what sub-systems of events it cares about, and
only those events are exposed to this instance.
- Allow the ring buffer to be broken up into bigger sub-buffers than
just the architecture page size.
A new tracefs file called "buffer_subbuf_size_kb" is created. The
user can now specify a minimum size the sub-buffer may be in
kilobytes. Note, that the implementation currently make the
sub-buffer size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user
only writes in kilobyte size, and the sub-buffer will be updated to
the next size that it will can accommodate it. If the user writes in
10, it will change the size to be 4 pages on x86 (16K), as that is
the next available size that can hold 10K pages.
- Update the debug output when a corrupt time is detected in the ring
buffer. If the ring buffer detects inconsistent timestamps, there's a
debug config options that will dump the contents of the meta data of
the sub-buffer that is used for debugging. Add some more information
to this dump that helps with debugging.
- Add more timestamp debugging checks (only triggers when the config is
enabled)
- Increase the trace_seq iterator to 2 page sizes.
- Allow strings written into tracefs_marker to be larger. Up to just
under 2 page sizes (based on what trace_seq can hold).
- Increase the trace_maker_raw write to be as big as a sub-buffer can
hold.
- Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has
been removed.
- More selftests were added.
- Some code clean ups as well.
* tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
ring-buffer: Remove stale comment from ring_buffer_size()
tracing histograms: Simplify parse_actions() function
tracing/selftests: Remove exec permissions from trace_marker.tc test
ring-buffer: Use subbuf_order for buffer page masking
tracing: Update subbuffer with kilobytes not page order
ringbuffer/selftest: Add basic selftest to test changing subbuf order
ring-buffer: Add documentation on the buffer_subbuf_order file
ring-buffer: Just update the subbuffers when changing their allocation order
ring-buffer: Keep the same size when updating the order
tracing: Stop the tracing while changing the ring buffer subbuf size
tracing: Update snapshot order along with main buffer order
ring-buffer: Make sure the spare sub buffer used for reads has same size
ring-buffer: Do no swap cpu buffers if order is different
ring-buffer: Clear pages on error in ring_buffer_subbuf_order_set() failure
ring-buffer: Read and write to ring buffers with custom sub buffer size
ring-buffer: Set new size of the ring buffer sub page
ring-buffer: Add interface for configuring trace sub buffer size
ring-buffer: Page size per ring buffer
ring-buffer: Have ring_buffer_print_page_header() be able to access ring_buffer_iter
ring-buffer: Check if absolute timestamp goes backwards
...
- Avoid building selftests when not on x86
-----BEGIN PGP SIGNATURE-----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=PaVo
-----END PGP SIGNATURE-----
Merge tag 'x86_sgx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Dave Hansen:
"This time, these are entirely confined to SGX selftests fixes.
The mini SGX enclave built by the selftests has garnered some
attention because it stands alone and does not need the sizable
infrastructure of the official SGX SDK. I think that's why folks are
suddently interested in cleaning it up.
- Clean up selftest compilation issues, mostly from non-gcc compilers
- Avoid building selftests when not on x86"
* tag 'x86_sgx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/sgx: Skip non X86_64 platform
selftests/sgx: Remove incomplete ABI sanitization code in test enclave
selftests/sgx: Discard unsupported ELF sections
selftests/sgx: Ensure expected location of test enclave buffer
selftests/sgx: Ensure test enclave buffer is entirely preserved
selftests/sgx: Fix linker script asserts
selftests/sgx: Handle relocations in test enclave
selftests/sgx: Produce static-pie executable for test enclave
selftests/sgx: Remove redundant enclave base address save/restore
selftests/sgx: Specify freestanding environment for enclave compilation
selftests/sgx: Separate linker options
selftests/sgx: Include memory clobber for inline asm in test enclave
selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entry
selftests/sgx: Fix uninitialized pointer dereference in error path
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZalBVQAKCRDbK58LschI
gyfQAP4+KhkJiJiOXsECo0f3JcuzDgCqEMnylNx0Wujzgs2s9wD+LEjYr8zztqUd
E9rkjGKUoSYYfarEJ0KKfy6Lv61BlgY=
=xI6t
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-01-18
We've added 10 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 806 insertions(+), 51 deletions(-).
The main changes are:
1) Fix an issue in bpf_iter_udp under backward progress which prevents
user space process from finishing iteration, from Martin KaFai Lau.
2) Fix BPF verifier to reject variable offset alu on registers with a type
of PTR_TO_FLOW_KEYS to prevent oob access, from Hao Sun.
3) Follow up fixes for kernel- and libbpf-side logic around handling
arg:ctx tagged arguments of BPF global subprogs, from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
selftests/bpf: Add test for alu on PTR_TO_FLOW_KEYS
bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS
selftests/bpf: Test udp and tcp iter batching
bpf: Avoid iter->offset making backward progress in bpf_iter_udp
bpf: iter_udp: Retry with a larger batch size without going back to the previous bucket
====================
Link: https://lore.kernel.org/r/20240118153936.11769-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'qos_pfc' test checks PFC behavior. The idea is to limit the traffic
using a shaper somewhere in the flow of the packets. In this area, the
buffer is smaller than the buffer at the beginning of the flow, so it fills
up until there is no more space left. The test configures there PFC
which is supposed to notice that the headroom is filling up and send PFC
Xoff to indicate the transmitter to stop sending traffic for the priorities
sharing this PG.
The Xon/Xoff threshold is auto-configured and always equal to
2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet,
traffic will keep arriving until the transmitter receives and processes
the PFC packet. This amount of traffic is known as the PFC delay allowance.
Currently the buffer for the delay traffic is configured as 100KB. The
MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB.
This allows 80KB extra to be stored in this buffer.
8-lane ports use two buffers among which the configured buffer is split,
the Xoff threshold then applies to each buffer in parallel.
The test does not take into account the behavior of 8-lane ports, when the
ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes,
packets are dropped and the test fails.
Check if the relevant ports use 8 lanes, in such case double the size of
the buffer, as the headroom is split half-half.
Cc: Shuah Khan <shuah@kernel.org>
Fixes: bfa804784e ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/23ff11b7dff031eb04a41c0f5254a2b636cd8ebb.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the diagram of the topology, $swp3 and $swp4 are described as 1Gbps
ports. This is wrong information, the test does not configure such speed.
Cc: Shuah Khan <shuah@kernel.org>
Fixes: bfa804784e ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/0087e2d416aff7e444d15f7c2958fc1d438dc27e.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When tc filters are first added to a net device, the corresponding local
port gets bound to an ACL group in the device. The group contains a list
of ACLs. In turn, each ACL points to a different TCAM region where the
filters are stored. During forwarding, the ACLs are sequentially
evaluated until a match is found.
One reason to place filters in different regions is when they are added
with decreasing priorities and in an alternating order so that two
consecutive filters can never fit in the same region because of their
key usage.
In Spectrum-2 and newer ASICs the firmware started to report that the
maximum number of ACLs in a group is more than 16, but the layout of the
register that configures ACL groups (PAGT) was not updated to account
for that. It is therefore possible to hit stack corruption [1] in the
rare case where more than 16 ACLs in a group are required.
Fix by limiting the maximum ACL group size to the minimum between what
the firmware reports and the maximum ACLs that fit in the PAGT register.
Add a test case to make sure the machine does not crash when this
condition is hit.
[1]
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120
[...]
dump_stack_lvl+0x36/0x50
panic+0x305/0x330
__stack_chk_fail+0x15/0x20
mlxsw_sp_acl_tcam_group_update+0x116/0x120
mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110
mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20
mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
mlxsw_sp_acl_rule_add+0x47/0x240
mlxsw_sp_flower_replace+0x1a9/0x1d0
tc_setup_cb_add+0xdc/0x1c0
fl_hw_replace_filter+0x146/0x1f0
fl_change+0xc17/0x1360
tc_new_tfilter+0x472/0xb90
rtnetlink_rcv_msg+0x313/0x3b0
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x244/0x390
netlink_sendmsg+0x1e4/0x440
____sys_sendmsg+0x164/0x260
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xc0
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fixes: c3ab435466 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Reported-by: Orel Hagag <orelh@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lately, a bug was found when many TC filters are added - at some point,
several bugs are printed to dmesg [1] and the switch is crashed with
segmentation fault.
The issue starts when gen_pool_free() fails because of unexpected
behavior - a try to free memory which is already freed, this leads to BUG()
call which crashes the switch and makes many other bugs.
Trying to track down the unexpected behavior led to a bug in eRP code. The
function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated
index, sets the value and returns an error code. When gen_pool_alloc()
fails it returns address 0, we track it and return -ENOBUFS outside, BUT
the call for gen_pool_alloc() already override the index in erp_table
structure. This is a problem when such allocation is done as part of
table expansion. This is not a new table, which will not be used in case
of allocation failure. We try to expand eRP table and override the
current index (non-zero) with zero. Then, it leads to an unexpected
behavior when address 0 is freed twice. Note that address 0 is valid in
erp_table->base_index and indeed other tables use it.
gen_pool_alloc() fails in case that there is no space left in the
pre-allocated pool, in our case, the pool is limited to
ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max
erp entries are required, we exceed the limit and return an error, this
error leads to "Failed to migrate vregion" print.
Fix this by changing erp_table->base_index only in case of a successful
allocation.
Add a test case for such a scenario. Without this fix it causes
segmentation fault:
$ TESTS="max_erp_entries_test" ./tc_flower.sh
./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null
[1]:
kernel BUG at lib/genalloc.c:508!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1
Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021
RIP: 0010:gen_pool_free_owner+0xc9/0xe0
...
Call Trace:
<TASK>
__mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum]
objagg_obj_root_destroy+0x18/0x80 [objagg]
objagg_obj_destroy+0x12c/0x130 [objagg]
mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum]
mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum]
mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum]
mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum]
tc_setup_cb_destroy+0xc1/0x180
fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
__fl_delete+0x1ac/0x1c0 [cls_flower]
fl_destroy+0xc2/0x150 [cls_flower]
tcf_proto_destroy+0x1a/0xa0
...
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
Fixes: f465261aa1 ("mlxsw: spectrum_acl: Implement common eRP core")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a followup to commit 03fb8565c8 ("selftests: bonding: add missing
build configs"), add more networking-specific config options which are
needed for bonding tests.
For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. All bonding tests passed.
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management") # for ipv6
Fixes: 6cbe791c0f ("kselftest: bonding: add num_grat_arp test") # for tc options
Fixes: 222c94ec0a ("selftests: bonding: add tests for ether type changes") # for nlmon
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240116154926.202164-1-bpoirier@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
netdevsim tests aren't very well integrated with kselftest,
which has its advantages and disadvantages. But regardless
of the intended integration - a config file to know what kernel
to build is very useful, add one.
Fixes: fc4c93f145 ("selftests: add basic netdevsim devlink flash testing")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240116154311.1945801-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On kernel that don't support arg:ctx tag, before adjusting global
subprog BTF information to match kernel's expected canonical type names,
make sure that types used by user are meaningful, and if not, warn and
don't do BTF adjustments.
This is similar to checks that kernel performs, but narrower in scope,
as only a small subset of BPF program types can be accommodated by
libbpf using canonical type names.
Libbpf unconditionally allows `struct pt_regs *` for perf_event program
types, unlike kernel, which supports that conditionally on architecture.
This is done to keep things simple and not cause unnecessary false
positives. This seems like a minor and harmless deviation, which in
real-world programs will be caught by kernels with arg:ctx tag support
anyways. So KISS principle.
This logic is hard to test (especially on latest kernels), so manual
testing was performed instead. Libbpf emitted the following warning for
perf_event program with wrong context argument type:
libbpf: prog 'arg_tag_ctx_perf': subprog 'subprog_ctx_tag' arg#0 is expected to be of `struct bpf_perf_event_data *` type
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a bunch of global subprogs across variety of program types to
validate expected kernel type enforcement logic for __arg_ctx arguments.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add feature detector of kernel-side arg:ctx (__arg_ctx) tag support. If
this is detected, libbpf will avoid doing any __arg_ctx-related BTF
rewriting and checks in favor of letting kernel handle this completely.
test_global_funcs/ctx_arg_rewrite subtest is adjusted to do the same
feature detection (albeit in much simpler, though round-about and
inefficient, way), and skip the tests. This is done to still be able to
execute this test on older kernels (like in libbpf CI).
Note, BPF token series ([0]) does a major refactor and code moving of
libbpf-internal feature detection "framework", so to avoid unnecessary
conflicts we keep newly added feature detection stand-alone with ad-hoc
result caching. Once things settle, there will be a small follow up to
re-integrate everything back and move code into its final place in
newly-added (by BPF token series) features.c file.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=814209&state=*
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The 'i' constraint expects a constant operand, which fn and its
constant derivative MK_CBO(fn) are, but passing fn through a function
as a parameter and using a local variable for MK_CBO(fn) allow the
compiler to lose sight of that when no optimization is done. Use
a macro instead of a function and skip the local variable to ensure
the compiler uses constants, matching the asm constraints.
Reported-by: Yunhui Cui <cuiyunhui@bytedance.com>
Closes: https://lore.kernel.org/all/20240117082514.42967-1-cuiyunhui@bytedance.com
Fixes: a29e2a48af ("RISC-V: selftests: Add CBO tests")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240117130933.57514-2-ajones@ventanamicro.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Here is the big set of char/misc and other driver subsystem changes for
6.8-rc1. Lots of stuff in here, but first off, you will get a merge
conflict in drivers/android/binder_alloc.c when merging this tree due to
changing coming in through the -mm tree.
The resolution of the merge issue can be found here:
https://lore.kernel.org/r/20231207134213.25631ae9@canb.auug.org.au
or in a simpler patch form in that thread:
https://lore.kernel.org/r/ZXHzooF07LfQQYiE@google.com
If there are issues with the merge of this file, please let me know.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported issues
(other than the binder merge conflict.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeMMQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynWNgCfQ/Yz7QO6EMLDwHO5LRsb3YMhjL4AoNVdanjP
YoI7f1I4GBcC0GKNfK6s
=+Kyv
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
* Support for many new extensions in hwprobe, along with a handful of
cleanups.
* Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE.
* Support for the which-cpus flavor of hwprobe.
* Support for XIP kernels has been resurrected.
-----BEGIN PGP SIGNATURE-----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=fLgG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for many new extensions in hwprobe, along with a handful of
cleanups
- Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE
- Support for the which-cpus flavor of hwprobe
- Support for XIP kernels has been resurrected
* tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
riscv: hwprobe: export Zicond extension
riscv: hwprobe: export Zacas ISA extension
riscv: add ISA extension parsing for Zacas
dt-bindings: riscv: add Zacas ISA extension description
riscv: hwprobe: export Ztso ISA extension
riscv: add ISA extension parsing for Ztso
use linux/export.h rather than asm-generic/export.h
riscv: Remove SHADOW_OVERFLOW_STACK_SIZE macro
riscv; fix __user annotation in save_v_state()
riscv: fix __user annotation in traps_misaligned.c
riscv: Select ARCH_WANTS_NO_INSTR
riscv: Remove obsolete rv32_defconfig file
riscv: Allow disabling of BUILTIN_DTB for XIP
riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro
riscv: Make XIP bootable again
riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC
riscv: Fix module_alloc() that did not reset the linear mapping permissions
riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping
riscv: Check if the code to patch lies in the exit section
riscv: Use the same CPU operations for all CPUs
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZaHe5gAKCRDdBJ7gKXxA
jrAiAQCYZQuwsNVyGJUuPD/GGQzqVUZNpWcuYwMXXAi6dO5rSAD+LDeFviun2K52
uHCz4iRq5EwNLA+MbdHtAnQzr+e5CQ8=
=Jjkw
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-01-12-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"For once not mostly MM-related.
17 hotfixes. 10 address post-6.7 issues and the other 7 are cc:stable"
* tag 'mm-hotfixes-stable-2024-01-12-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
userfaultfd: avoid huge_zero_page in UFFDIO_MOVE
MAINTAINERS: add entry for shrinker
selftests: mm: hugepage-vmemmap fails on 64K page size systems
mm/memory_hotplug: fix memmap_on_memory sysfs value retrieval
mailmap: switch email for Tanzir Hasan
mailmap: add old address mappings for Randy
kernel/crash_core.c: make __crash_hotplug_lock static
efi: disable mirror feature during crashkernel
kexec: do syscore_shutdown() in kernel_kexec
mailmap: update entry for Manivannan Sadhasivam
fs/proc/task_mmu: move mmu notification mechanism inside mm lock
mm: zswap: switch maintainers to recently active developers and reviewers
scripts/decode_stacktrace.sh: optionally use LLVM utilities
kasan: avoid resetting aux_lock
lib/Kconfig.debug: disable CONFIG_DEBUG_INFO_BTF for Hexagon
MAINTAINERS: update LTP maintainers
kdump: defer the insertion of crashkernel resources
This is a follow-up of commit a159cbe81d ("selftests: rtnetlink: check
enslaving iface in a bond") after the merge of net-next into net.
The goal is to follow the new convention,
see commit d3b6b11161 ("selftests/net: convert rtnetlink.sh to run it in
unique namespace") for more details.
Let's use also the generic dummy name instead of defining a new one.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240115135922.3662648-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case for PTR_TO_FLOW_KEYS alu. Testing if alu with variable
offset on flow_keys is rejected. For the fixed offset success case, we
already have C code coverage to verify (e.g. via bpf_flow.c).
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240115082028.9992-2-sunhao.th@gmail.com
bonding tests also try to create bridge, veth and dummy
interfaces. These are not currently listed in config.
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Fixes: c078290a2b ("selftests: include bonding tests into the kselftest infra")
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240116020201.1883023-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Number of tests are failing when netdev renaming is active
on the system. Add udevadm settle in logic determining
the names.
Fixes: 242aaf03dc ("selftests: add a test for ethtool pause stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240114224726.1210532-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The lib.sh script is meant to be sourced from other scripts, not executed
directly. Therefore, remove the executable bits from lib.sh's permissions.
Fixes: fe32dffdcd ("selftests: forwarding: add TCPDUMP_EXTRA_FLAGS to lib.sh")
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tests changed by this patch, as well as the scripts they source, use
features which are not part of POSIX sh (ex. 'source' and 'local'). As a
result, these tests fail when /bin/sh is dash such as on Debian. Change the
interpreter to bash so that these tests can run successfully.
Fixes: d43eff0b85 ("selftests: bonding: up/down delay w/ slave link flapping")
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot found an error with how splice() is handled with a msg greater
than 32. This was fixed in previous patch, but lets add a test for
it to ensure it continues to work.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch adds a test to exercise the bpf_iter_udp batching
logic. It specifically tests the case that there are multiple
so_reuseport udp_sk in a bucket of the udp_table.
The test creates two sets of so_reuseport sockets and
each set on a different port. Meaning there will be
two buckets in the udp_table.
The test does the following:
1. read() 3 out of 4 sockets in the first bucket.
2. close() all sockets in the first bucket. This
will ensure the current bucket's offset in
the kernel does not affect the read() of the
following bucket.
3. read() all 4 sockets in the second bucket.
The test also reads one udp_sk at a time from
the bpf_iter_udp prog. The true case in
"do_test(..., bool onebyone)". This is the buggy case
that the previous patch fixed.
It also tests the "false" case in "do_test(..., bool onebyone)",
meaning the userspace reads the whole bucket. There is
no bug in this case but adding this test also while
at it.
Considering the way to have multiple tcp_sk in the same
bucket is similar (by using so_reuseport),
this patch also tests the bpf_iter_tcp even though the
bpf_iter_tcp batching logic works correctly.
Both IP v4 and v6 are exercising the same bpf_iter batching
code path, so only v6 is tested.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240112190530.3751661-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This pull request contains the following branches:
doc.2023.12.13a: Documentation and comment updates.
torture.2023.11.23a: RCU torture, locktorture updates that include
cleanups; nolibc init build support for mips, ppc and rv64;
testing of mid stall duration scenario and fixing fqs task
creation conditions.
fixes.2023.12.13a: Misc fixes, most notably restricting usage of
RCU CPU stall notifiers, to confine their usage primarily
to debug kernels.
rcu-tasks.2023.12.12b: RCU tasks minor fixes.
srcu.2023.12.13a: lockdep annotation fix for NMI-safe accesses,
callback advancing/acceleration cleanup and documentation
improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSi2tPIQIc2VEtjarIAHS7/6Z0wpQUCZYUS0AAKCRAAHS7/6Z0w
pRXgAQD+k8oqjvKL6la61ppWm5Y7NLjdj/IbV+cOd42jKnM6PAEAyavNhX0n7zGx
o9cDlvIDxJfHnFrOTc5WLH9yEs3IiQQ=
=8rdu
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.8' of https://github.com/neeraju/linux
Pull RCU updates from Neeraj Upadhyay:
- Documentation and comment updates
- RCU torture, locktorture updates that include cleanups; nolibc init
build support for mips, ppc and rv64; testing of mid stall duration
scenario and fixing fqs task creation conditions
- Misc fixes, most notably restricting usage of RCU CPU stall
notifiers, to confine their usage primarily to debug kernels
- RCU tasks minor fixes
- lockdep annotation fix for NMI-safe accesses, callback
advancing/acceleration cleanup and documentation improvements
* tag 'rcu.release.v6.8' of https://github.com/neeraju/linux:
rcu: Force quiescent states only for ongoing grace period
doc: Clarify historical disclaimers in memory-barriers.txt
doc: Mention address and data dependencies in rcu_dereference.rst
doc: Clarify RCU Tasks reader/updater checklist
rculist.h: docs: Fix wrong function summary
Documentation: RCU: Remove repeated word in comments
srcu: Use try-lock lockdep annotation for NMI-safe access.
srcu: Explain why callbacks invocations can't run concurrently
srcu: No need to advance/accelerate if no callback enqueued
srcu: Remove superfluous callbacks advancing from srcu_gp_start()
rcu: Remove unused macros from rcupdate.h
rcu: Restrict access to RCU CPU stall notifiers
rcu-tasks: Mark RCU Tasks accesses to current->rcu_tasks_idle_cpu
rcutorture: Add fqs_holdoff check before fqs_task is created
rcutorture: Add mid-sized stall to TREE07
rcutorture: add nolibc init support for mips, ppc and rv64
locktorture: Increase Hamming distance between call_rcu_chain and rcu_call_chains
The kernel sefltest mm/hugepage-vmemmap fails on architectures which has
different page size other than 4K. In hugepage-vmemmap page size used is
4k so the pfn calculation will go wrong on systems which has different
page size .The length of MAP_HUGETLB memory must be hugepage aligned but
in hugepage-vmemmap map length is 2M so this will not get aligned if the
system has differnet hugepage size.
Added psize() to get the page size and default_huge_page_size() to
get the default hugepage size at run time, hugepage-vmemmap test pass
on powerpc with 64K page size and x86 with 4K page size.
Result on powerpc without patch (page size 64K)
*# ./hugepage-vmemmap
Returned address is 0x7effff000000 whose pfn is 0
Head page flags (100000000) is invalid
check_page_flags: Invalid argument
*#
Result on powerpc with patch (page size 64K)
*# ./hugepage-vmemmap
Returned address is 0x7effff000000 whose pfn is 600
*#
Result on x86 with patch (page size 4K)
*# ./hugepage-vmemmap
Returned address is 0x7fc7c2c00000 whose pfn is 1dac00
*#
Link: https://lkml.kernel.org/r/3b3a3ae37ba21218481c482a872bbf7526031600.1704865754.git.donettom@linux.vnet.ibm.com
Fixes: b147c89cd4 ("selftests: vm: add a hugetlb test case")
Signed-off-by: Donet Tom <donettom@linux.vnet.ibm.com>
Reported-by: Geetika Moolchandani <geetika@linux.ibm.com>
Tested-by: Geetika Moolchandani <geetika@linux.ibm.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3SCb
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- assorted functional fixes for hid-steam ported from SteamOS betas
(Vicki Pfau)
- fix for custom sensor-hub sensors (hinge angle sensor and LISS
sensors) not working (Yauhen Kharuzhy)
- functional fix for handling Confidence in Wacom driver (Jason
Gerecke)
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
- power management fix for Wacom userspace battery exporting
(Tatsunosuke Tobita)
- rework of wait-for-reset in order to reduce the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50%
better, but there are still further improvements to be made (Hans de
Goede)
- greatly improved coverage of Tablets in hid-selftests (Benjamin
Tissoires)
- support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan
McClelland)
- support for controlling mcp2200 GPIOs (Johannes Roith)
- power management improvement for EHL OOB wakeup in intel-ish
(Kai-Heng Feng)
- other assorted device-specific fixes and code cleanups
* tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits)
HID: amd_sfh: Add a new interface for exporting ALS data
HID: amd_sfh: Add a new interface for exporting HPD data
HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
HID: i2c-hid: elan: Add ili2901 timing
dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901
HID: bpf: make bus_type const in struct hid_bpf_ops
HID: make ishtp_cl_bus_type const
HID: make hid_bus_type const
HID: hid-steam: Add gamepad-only mode switched to by holding options
HID: hid-steam: Better handling of serial number length
HID: hid-steam: Update list of identifiers from SDL
HID: hid-steam: Make client_opened a counter
HID: hid-steam: Clean up locking
HID: hid-steam: Disable watchdog instead of using a heartbeat
HID: hid-steam: Avoid overwriting smoothing parameter
HID: magicmouse: fix kerneldoc for struct magicmouse_sc
HID: sensor-hub: Enable hid core report processing for all devices
HID: wacom: Add additional tests of confidence behavior
HID: wacom: Correct behavior when processing some confidence == false touches
HID: nintendo: add support for nso controllers
...
It was a clam development cycle. There were an ALSA core extension
for subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4.
Also supports for ACPI parse for the ES83xx driver that reduces
quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes
-----BEGIN PGP SIGNATURE-----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=yVxc
-----END PGP SIGNATURE-----
Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
The goal is to check the following two sequences:
> ip link set dummy0 up
> ip link set dummy0 master bond0 down
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240108094103.2001224-3-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rules to link selftests are:
> $(OUTPUT)/%_ipv4: %.c
> $(LINK.c) $^ $(LDLIBS) -o $@
>
> $(OUTPUT)/%_ipv6: %.c
> $(LINK.c) -DIPV6_TEST $^ $(LDLIBS) -o $@
The intel test robot uses only selftest's Makefile, not the top linux
Makefile:
> make W=1 O=/tmp/kselftest -C tools/testing/selftests
So, $(LINK.c) is determined by environment, rather than by kernel
Makefiles. On my machine (as well as other people that ran tcp-ao
selftests) GNU/Make implicit definition does use $(LDFLAGS):
> [dima@Mindolluin ~]$ make -p -f/dev/null | grep '^LINK.c\>'
> make: *** No targets. Stop.
> LINK.c = $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)
But, according to build robot report, it's not the case for them.
While I could just avoid using pre-defined $(LINK.c), it's also used by
selftests/lib.mk by default.
Anyways, according to GNU/Make documentation [1], I should have used
$(LDLIBS) instead of $(LDFLAGS) in the first place, so let's just do it:
> LDFLAGS
> Extra flags to give to compilers when they are supposed to invoke
> the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added
> to the LDLIBS variable instead.
> LDLIBS
> Library flags or names given to compilers when they are supposed
> to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still
> supported) alternative to LDLIBS. Non-library linker flags, such
> as -L, should go in the LDFLAGS variable.
[1]: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
Fixes: cfbab37b3d ("selftests/net: Add TCP-AO library")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401011151.veyYTJzq-lkp@intel.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240110-tcp_ao-selftests-makefile-v1-1-aa07d043f052@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core & protocols
----------------
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up
build time warnings to safeguard against future header changes.
This improves TCP performances with many concurrent connections
up to 40%.
- Add page-pool netlink-based introspection, exposing the
memory usage and recycling stats. This helps indentify
bad PP users and possible leaks.
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set.
This lowers the time taken by connect() for hosts having
many active connections to the same destination.
- Refactor the TCP bind conflict code, shrinking related socket
structs.
- Refactor TCP SYN-Cookie handling, as a preparation step to
allow arbitrary SYN-Cookie processing via eBPF.
- Tune optmem_max for 0-copy usage, increasing the default value
to 128KB and namespecifying it.
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations.
- Reduce extension header parsing overhead at GRO time.
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries.
- Reorder nftables struct members, to keep data accessed by the
datapath first.
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer.
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex).
- More data-race annotations.
- Extend the diag interface to dump TCP bound-only sockets.
- Conditional notification of events for TC qdisc class and actions.
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID.
- Implement SMCv2.1 virtual ISM device support.
- Add support for Batman-avd mulicast packet type.
BPF
---
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers. It
improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload.
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y.
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques.
- Support uid/gid options when mounting bpffs.
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is identified
by its id.
- Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext.
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter.
- Support for VLAN tag in XDP hints.
- Remove deprecated bpfilter kernel leftovers given the project
is developed in user-space (https://github.com/facebook/bpfilter).
Misc
----
- Support for parellel TC self-tests execution.
- Increase MPTCP self-tests coverage.
- Updated the bridge documentation, including several so-far
undocumented features.
- Convert all the net self-tests to run in unique netns, to
avoid random failures due to conflict and allow concurrent
runs.
- Add TCP-AO self-tests.
- Add kunit tests for both cfg80211 and mac80211.
- Autogenerate Netlink families documentation from YAML spec.
- Add yml-gen support for fixed headers and recursive nests, the
tool can now generate user-space code for all genetlink families
for which we have specs.
- A bunch of additional module descriptions fixes.
- Catch incorrect freeing of pages belonging to a page pool.
Driver API
----------
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust.
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship.
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances.
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host.
- Add support for ethtool symmetric-xor RSS hash.
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform.
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute.
- Convert older drivers to platform remove callback returning void.
- Add support for PHY package MMD read/write.
New hardware / drivers
----------------------
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed
-------
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will allow
in future releases combining multiple PFs devices attached to
different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring param,
coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=1bW6
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
Add test cases for the IOMMU_HWPT_INVALIDATE ioctl and verify it by using
the new IOMMU_TEST_OP_MD_CHECK_IOTLB.
Link: https://lore.kernel.org/r/20240111041015.47920-7-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Co-developed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allow to test whether IOTLB has been invalidated or not.
Link: https://lore.kernel.org/r/20240111041015.47920-6-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Christoph Muellner <christoph.muellner@vrull.eu> says:
From: Christoph Müllner <christoph.muellner@vrull.eu>
When building the RISC-V selftests with a riscv32 compiler I ran into
a couple of compiler warnings. While riscv32 support for these tests is
questionable, the fixes are so trivial that it is probably best to simply
apply them.
Note that the missing-include patch and some format string warnings
are also relevant for riscv64.
* b4-shazam-merge:
tools: selftests: riscv: Fix compile warnings in mm tests
tools: selftests: riscv: Fix compile warnings in vector tests
tools: selftests: riscv: Add missing include for vector test
tools: selftests: riscv: Fix compile warnings in cbo
tools: selftests: riscv: Fix compile warnings in hwprobe
Link: https://lore.kernel.org/r/20231123185821.2272504-1-christoph.muellner@vrull.eu
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When building the mm tests with a riscv32 compiler, we see a range
of shift-count-overflow errors from shifting 1UL by more than 32 bits
in do_mmaps(). Since, the relevant code is only called from code that
is gated by `__riscv_xlen == 64`, we can just apply the same gating
to do_mmaps().
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231123185821.2272504-6-christoph.muellner@vrull.eu
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
GCC prints a couple of format string warnings when compiling
the vector tests. Let's follow the recommendation in
Documentation/printk-formats.txt to fix these warnings.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231123185821.2272504-5-christoph.muellner@vrull.eu
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
GCC raises the following warning:
warning: 'status' may be used uninitialized
The warning comes from the fact, that the signature of waitpid() is
unknown and therefore the initialization of GCC cannot be guessed.
Let's add the relevant header to address this warning.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231123185821.2272504-4-christoph.muellner@vrull.eu
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
GCC prints a couple of format string warnings when compiling
the cbo test. Let's follow the recommendation in
Documentation/printk-formats.txt to fix these warnings.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231123185821.2272504-3-christoph.muellner@vrull.eu
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
GCC prints a couple of format string warnings when compiling
the hwprobe test. Let's follow the recommendation in
Documentation/printk-formats.txt to fix these warnings.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231123185821.2272504-2-christoph.muellner@vrull.eu
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
To help make the move of sysctls out of kernel/sysctl.c not incur a size
penalty sysctl has been changed to allow us to not require the sentinel, the
final empty element on the sysctl array. Joel Granados has been doing all this
work. On the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7 we had all arch/ and drivers/ modified to remove
the sentinel. For v6.8-rc1 we get a few more updates for fs/ directory only.
The kernel/ directory is left but we'll save that for v6.9-rc1 as those patches
are still being reviewed. After that we then can expect also the removal of the
no longer needed check for procname == NULL.
Let us recap the purpose of this work:
- this helps reduce the overall build time size of the kernel and run time
memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move sysctls
out from kernel/sysctl.c to their own files
Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to see further
work by Thomas Weißschuh with the constificatin of the struct ctl_table.
Due to Joel Granados's work, and to help bring in new blood, I have suggested
for him to become a maintainer and he's accepted. So for v6.9-rc1 I look forward
to seeing him sent you a pull request for further sysctl changes. This also
removes Iurii Zaikin as a maintainer as he has moved on to other projects and
has had no time to help at all.
-----BEGIN PGP SIGNATURE-----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=2qBt
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work.
In the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7 we had all arch/ and drivers/ modified to
remove the sentinel. For v6.8-rc1 we get a few more updates for fs/
directory only.
The kernel/ directory is left but we'll save that for v6.9-rc1 as
those patches are still being reviewed. After that we then can expect
also the removal of the no longer needed check for procname == NULL.
Let us recap the purpose of this work:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to
see further work by Thomas Weißschuh with the constificatin of the
struct ctl_table.
Due to Joel Granados's work, and to help bring in new blood, I have
suggested for him to become a maintainer and he's accepted. So for
v6.9-rc1 I look forward to seeing him sent you a pull request for
further sysctl changes. This also removes Iurii Zaikin as a maintainer
as he has moved on to other projects and has had no time to help at
all"
* tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove struct ctl_path
sysctl: delete unused define SYSCTL_PERM_EMPTY_DIR
coda: Remove the now superfluous sentinel elements from ctl_table array
sysctl: Remove the now superfluous sentinel elements from ctl_table array
fs: Remove the now superfluous sentinel elements from ctl_table array
cachefiles: Remove the now superfluous sentinel element from ctl_table array
sysclt: Clarify the results of selftest run
sysctl: Add a selftest for handling empty dirs
sysctl: Fix out of bounds access for empty sysctl registers
MAINTAINERS: Add Joel Granados as co-maintainer for proc sysctl
MAINTAINERS: remove Iurii Zaikin from proc sysctl
Pick up the CPER to CXL driver integration work for v6.8. Some
additional cleanup of cper_estatus_print() messages is needed, but that
is to be handled incrementally.
This kselftest update for Linux 6.8-rc1 consists of enhancements
to reporting test results, fixes to root and user run behavior
and fixing ksft_print_msg() calls.
-----BEGIN PGP SIGNATURE-----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=2+oJ
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"Enhancements to reporting test results, fixes to root and user run
behavior and fixing ksft_print_msg() calls"
* tag 'linux_kselftest-next-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tracing/selftests: Add ownership modification tests for eventfs
selftests: sched: Remove initialization to 0 for a static variable
selftests: capabilities: namespace create varies for root and normal user
selftests: prctl: Add prctl test for PR_GET_NAME
kselftest/vDSO: Use ksft_print_msg() rather than printf in vdso_test_abi
kselftest/vDSO: Fix message formatting for clock_id logging
kselftest/vDSO: Make test name reporting for vdso_abi_test tooling friendly
selftests:x86: Fix Format String Warnings in lam.c
selftests/breakpoints: Fix format specifier in ksft_print_msg in step_after_suspend_test.c
selftests:breakpoints: Fix Format String Warning in breakpoint_test
This KUnit update for Linux 6.8-rc1 consists of:
- a new feature that adds APIs for managing devices introducing
a set of helper functions which allow devices (internally a
struct kunit_device) to be created and managed by KUnit.
These devices will be automatically unregistered on
test exit. These helpers can either use a user-provided
struct device_driver, or have one automatically created and
managed by KUnit. In both cases, the device lives on a new
kunit_bus.
- changes to switch drm/tests to use kunit devices
- several fixes and enhancements to attribute feature
- changes to reorganize deferred action function introducing
KUNIT_DEFINE_ACTION_WRAPPER
- new feature adds ability to run tests after boot using debugfs
- fixes and enhancements to string-stream-test:
- parse ERR_PTR in string_stream_destroy()
- unchecked dereference in bug fix in debugfs_print_results()
- handling errors from alloc_string_stream()
- NULL-dereference bug fix in kunit_init_suite()
-----BEGIN PGP SIGNATURE-----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=79+u
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- a new feature that adds APIs for managing devices introducing a set
of helper functions which allow devices (internally a struct
kunit_device) to be created and managed by KUnit.
These devices will be automatically unregistered on test exit. These
helpers can either use a user-provided struct device_driver, or have
one automatically created and managed by KUnit. In both cases, the
device lives on a new kunit_bus.
- changes to switch drm/tests to use kunit devices
- several fixes and enhancements to attribute feature
- changes to reorganize deferred action function introducing
KUNIT_DEFINE_ACTION_WRAPPER
- new feature adds ability to run tests after boot using debugfs
- fixes and enhancements to string-stream-test:
- parse ERR_PTR in string_stream_destroy()
- unchecked dereference in bug fix in debugfs_print_results()
- handling errors from alloc_string_stream()
- NULL-dereference bug fix in kunit_init_suite()
* tag 'linux_kselftest-kunit-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (27 commits)
kunit: Fix some comments which were mistakenly kerneldoc
kunit: Protect string comparisons against NULL
kunit: Add example of kunit_activate_static_stub() with pointer-to-function
kunit: Allow passing function pointer to kunit_activate_static_stub()
kunit: Fix NULL-dereference in kunit_init_suite() if suite->log is NULL
kunit: Reset test->priv after each param iteration
kunit: Add example for using test->priv
drm/tests: Switch to kunit devices
ASoC: topology: Replace fake root_device with kunit_device in tests
overflow: Replace fake root_device with kunit_device
fortify: test: Use kunit_device
kunit: Add APIs for managing devices
Documentation: Add debugfs docs with run after boot
kunit: add ability to run tests after boot using debugfs
kunit: add is_init test attribute
kunit: add example suite to test init suites
kunit: add KUNIT_INIT_TABLE to init linker section
kunit: move KUNIT_TABLE out of INIT_DATA
kunit: tool: add test for parsing attributes
kunit: tool: fix parsing of test attributes
...
This nolibc update for Linux 6.8-rc1 consists of:
* Support for PIC mode on MIPS.
* Support for getrlimit()/setrlimit().
* Replace some custom declarations with UAPI includes.
* A new script "run-tests.sh" to run the testsuite over different architectures
and configurations.
* A few non-functional code cleanups.
* Minor improvements to nolibc-test, primarily to support the test script.
There are no urgent fixes available at this time.
-----BEGIN PGP SIGNATURE-----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=gQNC
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-nolibc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
- Support for PIC mode on MIPS
- Support for getrlimit()/setrlimit()
- Replace some custom declarations with UAPI includes
- A new script "run-tests.sh" to run the testsuite over different
architectures and configurations
- A few non-functional code cleanups
- Minor improvements to nolibc-test, primarily to support the test
script
* tag 'linux_kselftest-nolibc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (22 commits)
selftests/nolibc: disable coredump via setrlimit
tools/nolibc: add support for getrlimit/setrlimit
tools/nolibc: drop custom definition of struct rusage
tools/nolibc: drop duplicated testcase ioctl_tiocinq
tools/nolibc: annotate va_list printf formats
selftests/nolibc: make result alignment more robust
tools/nolibc: mips: add support for PIC
selftests/nolibc: run-tests.sh: enable testing via qemu-user
selftests/nolibc: introduce QEMU_ARCH_USER
selftests/nolibc: fix testcase status alignment
selftests/nolibc: add configuration for mipso32be
selftests/nolibc: extraconfig support
selftests/nolibc: explicitly specify ABI for MIPS
selftests/nolibc: use XARCH for MIPS
tools/nolibc: move MIPS ABI validation into arch-mips.h
tools/nolibc: error out on unsupported architecture
selftests/nolibc: add script to run testsuite
selftests/nolibc: support out-of-tree builds
selftests/nolibc: anchor paths in $(srcdir) if possible
selftests/nolibc: use EFI -bios for LoongArch qemu
...
- Add dynamic thresholds for trip point crossing detection to prevent
trip point crossing notifications from being sent at incorrect times
or not at all in some cases (Rafael J. Wysocki).
- Fix synchronization issues related to the resume of thermal zones
during a system-wide resume and allow thermal zones to be resumed
concurrently (Rafael J. Wysocki).
- Modify the thermal zone unregistration to wait for the given zone to
go away completely before returning to the caller and rework the
sysfs interface for trip points on top of that (Rafael J. Wysocki).
- Fix a possible NULL pointer dereference in thermal zone registration
error path (Rafael J. Wysocki).
- Clean up the IPA thermal governor and modify it (with the help of a
new governor callback) to avoid allocating and freeing memory every
time its throttling callback is invoked (Lukasz Luba).
- Make the IPA thermal governor handle thermal instance weight changes
via sysfs correctly (Lukasz Luba).
- Update the thermal netlink code to avoid sending messages if there
are no recipients (Stanislaw Gruszka).
- Convert Mediatek Thermal to the json-schema (Rafał Miłecki).
- Fix thermal DT bindings issue on Loongson (Binbin Zhou).
- Fix returning NULL instead of -ENODEV during thermal probe on
Loogsoon (Binbin Zhou).
- Add thermal DT binding for tsens on the SM8650 platform (Neil
Armstrong).
- Add reboot on the critical trip point crossing option feature (Fabio
Estevam).
- Use DEFINE_SIMPLE_DEV_PM_OPS do define PM functions for thermal
suspend/resume on AmLogic (Uwe Kleine-König)
- Add D1/T113s THS controller support to the Sun8i thermal control
driver (Maxim Kiselev)
- Fix example in the thermal DT binding for QCom SPMI (Johan Hovold).
- Fix compilation warning in the tmon utility (Florian Eckert).
- Add support for interrupt-based thermal configuration on Exynos along
with a set of related cleanups (Mateusz Majewski).
- Make the Intel HFI thermal driver enable an HFI instance (eg. processor
package) from its first online CPU and disable it when the last CPU in
it goes offline (Ricardo Neri).
- Fix a kernel-doc warning and a spello in the cpuidle_cooling thermal
driver (Randy Dunlap).
- Move the .get_temp() thermal zone callback presence check to the
thermal zone registration code (Daniel Lezcano).
- Use the for_each_trip() macro for trip points table walks in a few
places in the thermal core (Rafael J. Wysocki).
- Make all trip point updates (via sysfs as well as from the platform
firmware) trigger trip change notifications (Rafael J. Wysocki).
- Drop redundant code from the thermal core and make one function in
it take a const pointer argument (Rafael J. Wysocki).
-----BEGIN PGP SIGNATURE-----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=QVyh
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for the D1/T113s THS controller to the sun8i driver
and a DT-based mechanism for platforms to indicate a preference to
reboot (instead of shutting down) on crossing a critical trip point,
fix issues, make other improvements (in the IPA governor, the Intel
HFI driver, the exynos driver and the thermal netlink interface among
other places) and clean up code.
One long-standing issue addressed here is that trip point crossing
notifications sent to user space might be unreliable due to the
incorrect handling of trip point hysteresis in the thermal core:
multiple notifications might be sent for the same event or there might
be events without any notification at all.
Specifics:
- Add dynamic thresholds for trip point crossing detection to prevent
trip point crossing notifications from being sent at incorrect
times or not at all in some cases (Rafael J. Wysocki)
- Fix synchronization issues related to the resume of thermal zones
during a system-wide resume and allow thermal zones to be resumed
concurrently (Rafael J. Wysocki)
- Modify the thermal zone unregistration to wait for the given zone
to go away completely before returning to the caller and rework the
sysfs interface for trip points on top of that (Rafael J. Wysocki)
- Fix a possible NULL pointer dereference in thermal zone
registration error path (Rafael J. Wysocki)
- Clean up the IPA thermal governor and modify it (with the help of a
new governor callback) to avoid allocating and freeing memory every
time its throttling callback is invoked (Lukasz Luba)
- Make the IPA thermal governor handle thermal instance weight
changes via sysfs correctly (Lukasz Luba)
- Update the thermal netlink code to avoid sending messages if there
are no recipients (Stanislaw Gruszka)
- Convert Mediatek Thermal to the json-schema (Rafał Miłecki)
- Fix thermal DT bindings issue on Loongson (Binbin Zhou)
- Fix returning NULL instead of -ENODEV during thermal probe on
Loogsoon (Binbin Zhou)
- Add thermal DT binding for tsens on the SM8650 platform (Neil
Armstrong)
- Add reboot on the critical trip point crossing option feature
(Fabio Estevam)
- Use DEFINE_SIMPLE_DEV_PM_OPS do define PM functions for thermal
suspend/resume on AmLogic (Uwe Kleine-König)
- Add D1/T113s THS controller support to the Sun8i thermal control
driver (Maxim Kiselev)
- Fix example in the thermal DT binding for QCom SPMI (Johan Hovold)
- Fix compilation warning in the tmon utility (Florian Eckert)
- Add support for interrupt-based thermal configuration on Exynos
along with a set of related cleanups (Mateusz Majewski)
- Make the Intel HFI thermal driver enable an HFI instance (eg.
processor package) from its first online CPU and disable it when
the last CPU in it goes offline (Ricardo Neri)
- Fix a kernel-doc warning and a spello in the cpuidle_cooling
thermal driver (Randy Dunlap)
- Move the .get_temp() thermal zone callback presence check to the
thermal zone registration code (Daniel Lezcano)
- Use the for_each_trip() macro for trip points table walks in a few
places in the thermal core (Rafael J. Wysocki)
- Make all trip point updates (via sysfs as well as from the platform
firmware) trigger trip change notifications (Rafael J. Wysocki)
- Drop redundant code from the thermal core and make one function in
it take a const pointer argument (Rafael J. Wysocki)"
* tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
thermal: trip: Constify thermal zone argument of thermal_zone_trip_id()
thermal: intel: hfi: Disable an HFI instance when all its CPUs go offline
thermal: intel: hfi: Enable an HFI instance from its first online CPU
thermal: intel: hfi: Refactor enabling code into helper functions
thermal/drivers/exynos: Use set_trips ops
thermal/drivers/exynos: Use BIT wherever possible
thermal/drivers/exynos: Split initialization of TMU and the thermal zone
thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
thermal/drivers/exynos: Simplify regulator (de)initialization
thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
thermal/drivers/exynos: Drop id field
thermal/drivers/exynos: Remove an unnecessary field description
tools/thermal/tmon: Fix compilation warning for wrong format
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
thermal/drivers/sun8i: Add D1/T113s THS controller support
dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
thermal: amlogic: Make amlogic_thermal_disable() return void
...
The CXL CPER and event log records share everything but a UUID/GUID in
their structures.
Define a cxl_event union without the UUID/GUID to be shared between the
CPER and event log record formats. Adjust the code to use this union.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-6-1bb8a4ca2c7a@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The UEFI CXL CPER structure does not include the UUID. Now that the
UUID is passed separately to the trace event there is no need to have
the UUID in those structures.
Move UUID from the event record header to the raw structures. Adjust
cxl-test to Create dummy structures for creating test records.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-5-1bb8a4ca2c7a@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan points out in review that the cxl_test code could be made better
through the use of UUID's defines rather than being open coded.[1]
Create UUID defines and use them rather than open coding them.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: http://lore.kernel.org/r/65738d09e30e2_45e0129451@dwillia2-xfh.jf.intel.com.notmuch [1]
Link: https://lore.kernel.org/r/20231220-cxl-cper-v5-3-1bb8a4ca2c7a@intel.com
[djbw: clang-format uuid definitions]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZZu2bRAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSISYA/ipOXctyQzetyl37ZcGGgj/lHdWWyTOuv7Bu
sSgPDITwAP9EG0E8cT2vgBALPjCBmYb4H7Y2EDKNjjHFEQdEtZiGAg==
=QhjN
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock updates from Mickaël Salaün:
"New tests, a slight optimization, and some cosmetic changes"
* tag 'landlock-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Optimize the number of calls to get_access_mask slightly
selftests/landlock: Rename "permitted" to "allowed" in ftruncate tests
landlock: Remove remaining "inline" modifiers in .c files [v6.6]
landlock: Remove remaining "inline" modifiers in .c files [v6.1]
landlock: Remove remaining "inline" modifiers in .c files [v5.15]
selftests/landlock: Add tests to check unhandled rule's access rights
selftests/landlock: Add tests to check unknown rule's access rights
-----BEGIN PGP SIGNATURE-----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=Py+n
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull security module updates from Paul Moore:
- Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and
lsm_set_self_attr().
The first syscall simply lists the LSMs enabled, while the second and
third get and set the current process' LSM attributes. Yes, these
syscalls may provide similar functionality to what can be found under
/proc or /sys, but they were designed to support multiple,
simultaneaous (stacked) LSMs from the start as opposed to the current
/proc based solutions which were created at a time when only one LSM
was allowed to be active at a given time.
We have spent considerable time discussing ways to extend the
existing /proc interfaces to support multiple, simultaneaous LSMs and
even our best ideas have been far too ugly to support as a kernel
API; after +20 years in the kernel, I felt the LSM layer had
established itself enough to justify a handful of syscalls.
Support amongst the individual LSM developers has been nearly
unanimous, with a single objection coming from Tetsuo (TOMOYO) as he
is worried that the LSM_ID_XXX token concept will make it more
difficult for out-of-tree LSMs to survive. Several members of the LSM
community have demonstrated the ability for out-of-tree LSMs to
continue to exist by picking high/unused LSM_ID values as well as
pointing out that many kernel APIs rely on integer identifiers, e.g.
syscalls (!), but unfortunately Tetsuo's objections remain.
My personal opinion is that while I have no interest in penalizing
out-of-tree LSMs, I'm not going to penalize in-tree development to
support out-of-tree development, and I view this as a necessary step
forward to support the push for expanded LSM stacking and reduce our
reliance on /proc and /sys which has occassionally been problematic
for some container users. Finally, we have included the linux-api
folks on (all?) recent revisions of the patchset and addressed all of
their concerns.
- Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit
ioctls on 64-bit systems problem.
This patch includes support for all of the existing LSMs which
provide ioctl hooks, although it turns out only SELinux actually
cares about the individual ioctls. It is worth noting that while
Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this
patch, they did both indicate they are okay with the changes.
- Fix a potential memory leak in the CALIPSO code when IPv6 is disabled
at boot.
While it's good that we are fixing this, I doubt this is something
users are seeing in the wild as you need to both disable IPv6 and
then attempt to configure IPv6 labeled networking via
NetLabel/CALIPSO; that just doesn't make much sense.
Normally this would go through netdev, but Jakub asked me to take
this patch and of all the trees I maintain, the LSM tree seemed like
the best fit.
- Update the LSM MAINTAINERS entry with additional information about
our process docs, patchwork, bug reporting, etc.
I also noticed that the Lockdown LSM is missing a dedicated
MAINTAINERS entry so I've added that to the pull request. I've been
working with one of the major Lockdown authors/contributors to see if
they are willing to step up and assume a Lockdown maintainer role;
hopefully that will happen soon, but in the meantime I'll continue to
look after it.
- Add a handful of mailmap entries for Serge Hallyn and myself.
* tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits)
lsm: new security_file_ioctl_compat() hook
lsm: Add a __counted_by() annotation to lsm_ctx.ctx
calipso: fix memory leak in netlbl_calipso_add_pass()
selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test
MAINTAINERS: add an entry for the lockdown LSM
MAINTAINERS: update the LSM entry
mailmap: add entries for Serge Hallyn's dead accounts
mailmap: update/replace my old email addresses
lsm: mark the lsm_id variables are marked as static
lsm: convert security_setselfattr() to use memdup_user()
lsm: align based on pointer length in lsm_fill_user_ctx()
lsm: consolidate buffer size handling into lsm_fill_user_ctx()
lsm: correct error codes in security_getselfattr()
lsm: cleanup the size counters in security_getselfattr()
lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation
lsm: drop LSM_ID_IMA
LSM: selftests for Linux Security Module syscalls
SELinux: Add selfattr hooks
AppArmor: Add selfattr hooks
Smack: implement setselfattr and getselfattr hooks
...
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
GCC 13.2.0 reported the warning of the print format specifier:
conf.c: In function ‘sysfs_get’:
conf.c:181:72: warning: format ‘%s’ expects argument of type ‘char *’, \
but argument 3 has type ‘int’ [-Wformat=]
181 | ksft_exit_fail_msg("sysfs: unable to read value '%s': %s\n",
| ~^
| |
| char *
| %d
The fix passes strerror(errno) as it was intended, like in the sibling error
exit message.
Fixes: aba51cd094 ("selftests: alsa - add PCM test")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-5-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GCC 13.2.0 compiler issued the following warning:
mixer-test.c:350:80: warning: format ‘%ld’ expects argument of type ‘long int’, \
but argument 5 has type ‘unsigned int’ [-Wformat=]
350 | ksft_print_msg("%s.%d value %ld more than item count %ld\n",
| ~~^
| |
| long int
| %d
351 | ctl->name, index, int_val,
352 | snd_ctl_elem_info_get_items(ctl->info));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| unsigned int
Fixing the format specifier in call to ksft_print_msg() according to the
compiler suggestion silences the warning.
Fixes: 10f2f19466 ("kselftest: alsa: Validate values read from enumerations")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-4-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The GCC 13.2.0 compiler issued the following warning:
mixer-test.c: In function ‘ctl_value_index_valid’:
mixer-test.c:322:79: warning: format ‘%lld’ expects argument of type ‘long long int’, \
but argument 5 has type ‘long int’ [-Wformat=]
322 | ksft_print_msg("%s.%d value %lld more than maximum %lld\n",
| ~~~^
| |
| long long int
| %ld
323 | ctl->name, index, int64_val,
324 | snd_ctl_elem_info_get_max(ctl->info));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long int
Fixing the format specifier as advised by the compiler suggestion removes the
warning.
Fixes: 3f48b137d8 ("kselftest: alsa: Factor out check that values meet constraints")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-3-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Minor fix in the number of arguments to error reporting function in the
test program as reported by GCC 13.2.0 warning.
mixer-test.c: In function ‘find_controls’:
mixer-test.c:169:44: warning: too many arguments for format [-Wformat-extra-args]
169 | ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The number of arguments in call to ksft_exit_fail_msg() doesn't correspond
to the format specifiers, so this is adjusted resembling the sibling calls
to the error function.
Fixes: b1446bda56 ("kselftest: alsa: Check for event generation when we write to controls")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-2-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Yafang Shao added task_get_cgroup1() helper to enable a similar BPF helper
so that BPF progs can be more useful on cgroup1 hierarchies. While cgroup1
is mostly in maintenance mode, this addition is very small while having an
outsized usefulness for users who are still on cgroup1. Yafang also
optimized root cgroup list access by making it RCU protected in the
process.
- Waiman Long optimized rstat operation leading to substantially lower and
more consistent lock hold time while flushing the hierarchical statistics.
As the lock can be acquired briefly in various hot paths, this reduction
has cascading benefits.
- Waiman also improved the quality of isolation for cpuset's isolated
partitions. CPUs which are allocated to isolated partitions are now
excluded from running unbound work items and cpu_is_isolated() test which
is used by vmstat and memcg to reduce interference now includes cpuset
isolated CPUs. While it isn't there yet, the hope is eventually reaching
parity with the isolation level provided by the `isolcpus` boot param but
in a dynamic manner.
This involved a couple workqueue patches which were applied directly to
cgroup/for-6.8 rather than ping-ponged through the wq tree. This was
because the wq code change was small and the area is usually very static
and unlikely to cause conflicts. However, luck had it that there was a wq
bug fix in the area during the 6.7 cycle which caused a conflict. The
conflict is contextual but can be a bit confusing to resolve, so there is
one merge from wq/for-6.7-fixes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZYnuJg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGQ5kAP9nMMWqi+R1HeG7+hWROTVjQZ0OM9KRcpZ1TmjF
FNbkJgEAzt+sPnoWwYDTSI7pkNeZ/IM7x1qkkKGvENNtUXrz0Ac=
=PyYN
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Yafang Shao added task_get_cgroup1() helper to enable a similar BPF
helper so that BPF progs can be more useful on cgroup1 hierarchies.
While cgroup1 is mostly in maintenance mode, this addition is very
small while having an outsized usefulness for users who are still on
cgroup1. Yafang also optimized root cgroup list access by making it
RCU protected in the process.
- Waiman Long optimized rstat operation leading to substantially lower
and more consistent lock hold time while flushing the hierarchical
statistics. As the lock can be acquired briefly in various hot paths,
this reduction has cascading benefits.
- Waiman also improved the quality of isolation for cpuset's isolated
partitions. CPUs which are allocated to isolated partitions are now
excluded from running unbound work items and cpu_is_isolated() test
which is used by vmstat and memcg to reduce interference now includes
cpuset isolated CPUs. While it isn't there yet, the hope is
eventually reaching parity with the isolation level provided by the
`isolcpus` boot param but in a dynamic manner.
* tag 'cgroup-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Move rcu_head up near the top of cgroup_root
cgroup/cpuset: Include isolated cpuset CPUs in cpu_is_isolated() check
cgroup: Avoid false cacheline sharing of read mostly rstat_cpu
cgroup/rstat: Optimize cgroup_rstat_updated_list()
cgroup: Fix documentation for cpu.idle
cgroup/cpuset: Expose cpuset.cpus.isolated
workqueue: Move workqueue_set_unbound_cpumask() and its helpers inside CONFIG_SYSFS
cgroup/rstat: Reduce cpu_lock hold time in cgroup_rstat_flush_locked()
cgroup/cpuset: Take isolated CPUs out of workqueue unbound cpumask
cgroup/cpuset: Keep track of CPUs in isolated partitions
selftests/cgroup: Minor code cleanup and reorganization of test_cpuset_prs.sh
workqueue: Add workqueue_unbound_exclude_cpumask() to exclude CPUs from wq_unbound_cpumask
selftests: cgroup: Fixes a typo in a comment
cgroup: Add a new helper for cgroup1 hierarchy
cgroup: Add annotation for holding namespace_sem in current_cgns_cgroup_from_root()
cgroup: Eliminate the need for cgroup_mutex in proc_cgroup_show()
cgroup: Make operations on the cgroup root_list RCU safe
cgroup: Remove unnecessary list_empty()
the prototype.
(Side note: we should really add zalloc() for such cases.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmWbvjgRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1gxJg//QBDT7Y3p91uRM/XknJ5wTZIuVg48gRoL
t0fvCtgcE2SPzpJCy45OzJsWlp9ehJEJtJZHNgcoKwbEEbupbo+N9F3XIkuA55GT
j9esp4ZeXqv4L6HO/dTIyQIrF69vzRq8Z0LoYi7O+7RZy7ZWivO+yJpGb8xN+SW2
XkFlXTB7CTJXMGZ++CO0aeIHJxi3hANSv19dpaMYRrmueDM/6BBY8RiJwWUqt7Cw
ZK0IuZBRhB0XR4tU3eevJQhxza6+VlPUxPXY6jVC5pg9yPd5ccigYPmDm7Jez3oB
nTdY6mHrGMakK8y4VJDDoU/2cY83A3rS8RxLPCO2Z0IkTmI0IY4lJ5/IlGQO0+r/
RWrnoD7BXCSN7/bws+FcDREl1tClIQBiAreeNBi3GpAsxNC+FnmaA4bGHpEHxZJR
PrbTHotXk04HsJULJgt1kA81di7/WJBszQqVKeKRDv5Q9o6t4vpXaVxLUDFb3W7+
/hpyjozfJUKFOcbLQa7eQlyrkzsPdtOp4Ga4MW9bsuaNPYlz9GswS3ubFo9eQcKm
/CiwLUwqiQ4E7PNlfjESnhH4q557Gim9C2JDXi9hbv3PWlqhM5DWebo+qNsEx3SC
i8IeClzDk9PDLxngJIhMBjyAmlBESZ1CzpzGo7yckLEMbRfAWLvsA80N5Ii8i0AO
R4VIVtxQyAs=
=3zAc
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixlet from Ingo Molnar:
"Address a GCC-14 warning: there's no real bug, but indeed the calloc
order doesn't match the prototype.
(Side note: we should really add zalloc() for such cases)"
* tag 'objtool-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix calloc call for new -Walloc-size
* for-next/cpufeature
- Remove ARM64_HAS_NO_HW_PREFETCH copy_page() optimisation for ye olde
Thunder-X machines.
- Avoid mapping KPTI trampoline when it is not required.
- Make CPU capability API more robust during early initialisation.
* for-next/early-idreg-overrides
- Remove dependencies on core kernel helpers from the early
command-line parsing logic in preparation for moving this code
before the kernel is mapped.
* for-next/fpsimd
- Restore kernel-mode fpsimd context lazily, allowing us to run fpsimd
code sequences in the kernel with pre-emption enabled.
* for-next/kbuild
- Install 'vmlinuz.efi' when CONFIG_EFI_ZBOOT=y.
- Makefile cleanups.
* for-next/lpa2-prep
- Preparatory work for enabling the 'LPA2' extension, which will
introduce 52-bit virtual and physical addressing even with 4KiB
pages (including for KVM guests).
* for-next/misc
- Remove dead code and fix a typo.
* for-next/mm
- Pass NUMA node information for IRQ stack allocations.
* for-next/perf
- Add perf support for the Synopsys DesignWare PCIe PMU.
- Add support for event counting thresholds (FEAT_PMUv3_TH) introduced
in Armv8.8.
- Add support for i.MX8DXL SoCs to the IMX DDR PMU driver.
- Minor PMU driver fixes and optimisations.
* for-next/rip-vpipt
- Remove what support we had for the obsolete VPIPT I-cache policy.
* for-next/selftests
- Improvements to the SVE and SME selftests.
* for-next/stacktrace
- Refactor kernel unwind logic so that it can used by BPF unwinding
and, eventually, reliable backtracing.
* for-next/sysregs
- Update a bunch of register definitions based on the latest XML drop
from Arm.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmWWvKYQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNIiTB/9agZBkEhZjP2sNDGyE4UFwawweWHkt2r8h
WyvdwP91Z/AIsYSsGYu36J0l4pOnMKp/i6t+rt031SK4j+Q8hJYhSfDt3RvVbc0/
Pz9D18V6cLrfq+Yxycqq9ufVdjs+m+CQ5WeLaRGmNIyEzJ/Jv/qrAN+2r603EeLP
nq08qMZhDIQd2ZzbigCnGaNrTsVSafFfBFv1GsgDvnMZAjs1G6457A6zu+NatNUc
+TMSG+3EawutHZZ2noXl0Ra7VOfIbVZFiUssxRPenKQByHHHR+QB2c/O1blri+dm
XLMutvqO2/WvYGIfXO5koqZqvpVeR3zXxPwmGi5hQBsmOjtXzKd+
=U4mo
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"CPU features:
- Remove ARM64_HAS_NO_HW_PREFETCH copy_page() optimisation for ye
olde Thunder-X machines
- Avoid mapping KPTI trampoline when it is not required
- Make CPU capability API more robust during early initialisation
Early idreg overrides:
- Remove dependencies on core kernel helpers from the early
command-line parsing logic in preparation for moving this code
before the kernel is mapped
FPsimd:
- Restore kernel-mode fpsimd context lazily, allowing us to run
fpsimd code sequences in the kernel with pre-emption enabled
KBuild:
- Install 'vmlinuz.efi' when CONFIG_EFI_ZBOOT=y
- Makefile cleanups
LPA2 prep:
- Preparatory work for enabling the 'LPA2' extension, which will
introduce 52-bit virtual and physical addressing even with 4KiB
pages (including for KVM guests).
Misc:
- Remove dead code and fix a typo
MM:
- Pass NUMA node information for IRQ stack allocations
Perf:
- Add perf support for the Synopsys DesignWare PCIe PMU
- Add support for event counting thresholds (FEAT_PMUv3_TH)
introduced in Armv8.8
- Add support for i.MX8DXL SoCs to the IMX DDR PMU driver.
- Minor PMU driver fixes and optimisations
RIP VPIPT:
- Remove what support we had for the obsolete VPIPT I-cache policy
Selftests:
- Improvements to the SVE and SME selftests
Stacktrace:
- Refactor kernel unwind logic so that it can used by BPF unwinding
and, eventually, reliable backtracing
Sysregs:
- Update a bunch of register definitions based on the latest XML drop
from Arm"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
kselftest/arm64: Don't probe the current VL for unsupported vector types
efi/libstub: zboot: do not use $(shell ...) in cmd_copy_and_pad
arm64: properly install vmlinuz.efi
arm64/sysreg: Add missing system instruction definitions for FGT
arm64/sysreg: Add missing system register definitions for FGT
arm64/sysreg: Add missing ExtTrcBuff field definition to ID_AA64DFR0_EL1
arm64/sysreg: Add missing Pauth_LR field definitions to ID_AA64ISAR1_EL1
arm64: memory: remove duplicated include
arm: perf: Fix ARCH=arm build with GCC
arm64: Align boot cpucap handling with system cpucap handling
arm64: Cleanup system cpucap handling
MAINTAINERS: add maintainers for DesignWare PCIe PMU driver
drivers/perf: add DesignWare PCIe PMU driver
PCI: Move pci_clear_and_set_dword() helper to PCI header
PCI: Add Alibaba Vendor ID to linux/pci_ids.h
docs: perf: Add description for Synopsys DesignWare PCIe PMU driver
arm64: irq: set the correct node for shadow call stack
Revert "perf/arm_dmc620: Remove duplicate format attribute #defines"
arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD
arm64: fpsimd: Preserve/restore kernel mode NEON at context switch
...
- Add initial support to recognise the HeXin C2000 processor.
- Add papr-vpd and papr-sysparm character device drivers for VPD & sysparm
retrieval, so userspace tools can be adapted to avoid doing raw firmware
calls from userspace.
- Sched domains optimisations for shared processor partitions on P9/P10.
- A series of optimisations for KVM running as a nested HV under PowerVM.
- Other small features and fixes.
Thanks to: Aditya Gupta, Aneesh Kumar K.V, Arnd Bergmann, Christophe Leroy,
Colin Ian King, Dario Binacchi, David Heidelberg, Geoff Levand, Gustavo A.
R. Silva, Haoran Liu, Jordan Niethe, Kajol Jain, Kevin Hao, Kunwu Chan, Li
kunyu, Li zeming, Masahiro Yamada, Michal Suchánek, Nathan Lynch, Naveen N Rao,
Nicholas Piggin, Randy Dunlap, Sathvika Vasireddy, Srikar Dronamraju, Stephen
Rothwell, Vaibhav Jain, Zhao Ke.
-----BEGIN PGP SIGNATURE-----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=LjlQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add initial support to recognise the HeXin C2000 processor.
- Add papr-vpd and papr-sysparm character device drivers for VPD &
sysparm retrieval, so userspace tools can be adapted to avoid doing
raw firmware calls from userspace.
- Sched domains optimisations for shared processor partitions on
P9/P10.
- A series of optimisations for KVM running as a nested HV under
PowerVM.
- Other small features and fixes.
Thanks to Aditya Gupta, Aneesh Kumar K.V, Arnd Bergmann, Christophe
Leroy, Colin Ian King, Dario Binacchi, David Heidelberg, Geoff Levand,
Gustavo A. R. Silva, Haoran Liu, Jordan Niethe, Kajol Jain, Kevin Hao,
Kunwu Chan, Li kunyu, Li zeming, Masahiro Yamada, Michal Suchánek,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Randy Dunlap, Sathvika
Vasireddy, Srikar Dronamraju, Stephen Rothwell, Vaibhav Jain, and
Zhao Ke.
* tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (96 commits)
powerpc/ps3_defconfig: Disable PPC64_BIG_ENDIAN_ELF_ABI_V2
powerpc/86xx: Drop unused CONFIG_MPC8610
powerpc/powernv: Add error handling to opal_prd_range_is_valid
selftests/powerpc: Fix spelling mistake "EACCESS" -> "EACCES"
powerpc/hvcall: Reorder Nestedv2 hcall opcodes
powerpc/ps3: Add missing set_freezable() for ps3_probe_thread()
powerpc/mpc83xx: Use wait_event_freezable() for freezable kthread
powerpc/mpc83xx: Add the missing set_freezable() for agent_thread_fn()
powerpc/fsl: Fix fsl,tmu-calibration to match the schema
powerpc/smp: Dynamically build Powerpc topology
powerpc/smp: Avoid asym packing within thread_group of a core
powerpc/smp: Add __ro_after_init attribute
powerpc/smp: Disable MC domain for shared processor
powerpc/smp: Enable Asym packing for cores on shared processor
powerpc/sched: Cleanup vcpu_is_preempted()
powerpc: add cpu_spec.cpu_features to vmcoreinfo
powerpc/imc-pmu: Add a null pointer check in update_events_in_group()
powerpc/powernv: Add a null pointer check in opal_powercap_init()
powerpc/powernv: Add a null pointer check in opal_event_init()
powerpc/powernv: Add a null pointer check to scom_debug_init_one()
...
and use them everywhere instead of ad-hoc family/model checks. Drop an
ancient AMD errata checking facility as a result
- Fix a fragile initcall ordering in intel_epb
- Do not issue the MFENCE+LFENCE barrier for the TSC deadline and X2APIC
MSRs on AMD as it is not needed there
-----BEGIN PGP SIGNATURE-----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=afTN
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu feature updates from Borislav Petkov:
- Add synthetic X86_FEATURE flags for the different AMD Zen generations
and use them everywhere instead of ad-hoc family/model checks. Drop
an ancient AMD errata checking facility as a result
- Fix a fragile initcall ordering in intel_epb
- Do not issue the MFENCE+LFENCE barrier for the TSC deadline and
X2APIC MSRs on AMD as it is not needed there
* tag 'x86_cpu_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Add X86_FEATURE_ZEN1
x86/CPU/AMD: Drop now unused CPU erratum checking function
x86/CPU/AMD: Get rid of amd_erratum_1485[]
x86/CPU/AMD: Get rid of amd_erratum_400[]
x86/CPU/AMD: Get rid of amd_erratum_383[]
x86/CPU/AMD: Get rid of amd_erratum_1054[]
x86/CPU/AMD: Move the DIV0 bug detection to the Zen1 init function
x86/CPU/AMD: Move Zenbleed check to the Zen2 init function
x86/CPU/AMD: Rename init_amd_zn() to init_amd_zen_common()
x86/CPU/AMD: Call the spectral chicken in the Zen2 init function
x86/CPU/AMD: Move erratum 1076 fix into the Zen1 init function
x86/CPU/AMD: Move the Zen3 BTC_NO detection to the Zen3 init function
x86/CPU/AMD: Carve out the erratum 1386 fix
x86/CPU/AMD: Add ZenX generations flags
x86/cpu/intel_epb: Don't rely on link order
x86/barrier: Do not serialize MSR accesses on AMD
commit 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZU0CgAKCRCRxhvAZXjc
osncAQDSJK0frJL+72NqXxa4YNzivrnuw6fhp5iaDAEqxdm8ygEAoJWyh7Rmkt8G
drAXWGyGnCYqv7UgC6axLyciid7TxQg=
=vJuv
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to retrieve detailed information about mounts
via two new system calls. This is hopefully the beginning of the end
of the saga that started with fsinfo() years ago.
The LWN articles in [1] and [2] can serve as a summary so we can avoid
rehashing everything here.
At LSFMM in May 2022 we got into a room and agreed on what we want to
do about fsinfo(). Basically, split it into pieces. This is the first
part of that agreement. Specifically, it is concerned with retrieving
information about mounts. So this only concerns the mount information
retrieval, not the mount table change notification, or the extended
filesystem specific mount option work. That is separate work.
Currently mounts have a 32bit id. Mount ids are already in heavy use
by libmount and other low-level userspace but they can't be relied
upon because they're recycled very quickly. We agreed that mounts
should carry a unique 64bit id by which they can be referenced
directly. This is now implemented as part of this work.
The new 64bit mount id is exposed in statx() through the new
STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
returned. If it is raised and the kernel supports the new 64bit mount
id the flag is raised in the result mask and the new 64bit mount id is
returned. New and old mount ids do not overlap so they cannot be
conflated.
Two new system calls are introduced that operate on the 64bit mount
id: statmount() and listmount(). A summary of the api and usage can be
found on LWN as well (cf. [3]) but of course, I'll provide a summary
here as well.
Both system calls rely on struct mnt_id_req. Which is the request
struct used to pass the 64bit mount id identifying the mount to
operate on. It is extensible to allow for the addition of new
parameters and for future use in other apis that make use of mount
ids.
statmount() mimicks the semantics of statx() and exposes a set flags
that userspace may raise in mnt_id_req to request specific information
to be retrieved. A statmount() call returns a struct statmount filled
in with information about the requested mount. Supported requests are
indicated by raising the request flag passed in struct mnt_id_req in
the @mask argument in struct statmount.
Currently we do support:
- STATMOUNT_SB_BASIC:
Basic filesystem info
- STATMOUNT_MNT_BASIC
Mount information (mount id, parent mount id, mount attributes etc)
- STATMOUNT_PROPAGATE_FROM
Propagation from what mount in current namespace
- STATMOUNT_MNT_ROOT
Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)
- STATMOUNT_MNT_POINT
Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)
- STATMOUNT_FS_TYPE
Name of the filesystem type as the magic number isn't enough due to submounts
The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
are appended to the end of the struct. Userspace can use the offsets
in @fs_type, @mnt_root, and @mnt_point to reference those strings
easily.
The struct statmount reserves quite a bit of space currently for
future extensibility. This isn't really a problem and if this bothers
us we can just send a follow-up pull request during this cycle.
listmount() is given a 64bit mount id via mnt_id_req just as
statmount(). It takes a buffer and a size to return an array of the
64bit ids of the child mounts of the requested mount. Userspace can
thus choose to either retrieve child mounts for a mount in batches or
iterate through the child mounts. For most use-cases it will be
sufficient to just leave space for a few child mounts. But for big
mount tables having an iterator is really helpful. Iterating through a
mount table works by setting @param in mnt_id_req to the mount id of
the last child mount retrieved in the previous listmount() call"
Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]
* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
add selftest for statmount/listmount
fs: keep struct mnt_id_req extensible
wire up syscalls for statmount/listmount
add listmount(2) syscall
statmount: simplify string option retrieval
statmount: simplify numeric option retrieval
add statmount(2) syscall
namespace: extract show_path() helper
mounts: keep list of mounts in an rbtree
add unique mount ID
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUxRQAKCRCRxhvAZXjc
ov/QAQDzvge3oQ9MEymmOiyzzcF+HhAXBr+9oEsYJjFc1p0TsgEA61gXjZo7F1jY
KBqd6znOZCR+Waj0kIVJRAo/ISRBqQc=
=0bRl
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
-----BEGIN PGP SIGNATURE-----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=bjfs
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-hyperv-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM x86 Hyper-V changes for 6.8:
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
-----BEGIN PGP SIGNATURE-----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=Q6c+
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.8
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWbJ5EACgkQJNaLcl1U
h9CZTwf/c8CPwoKABZear8jiQpZLUhFLuGQwSShPYVZ7XPzzTMp9BwVmd40DCnUi
NeSc22t2UgT0H06nx3QK8sKOhrpQoBQVrIajf2AaxD44TJbsOYGGe4pMh1sXKAMF
c0ybp8uRgsjiv2Y++SBXZLexGC11/b8eTFLV1nTK/i2nygGjbfWSJ9s4PpB9V6cA
nZrQ/p+x/ZwaBejFUnvE06M7GHtCD6lxrB9Q1EmWA4RxcW7RNUtIN5gr16HlaMiC
3gix4mg40llhBFF9s4eBjRBNKL2paiejPZwcYkAC8w+SkZ/roXaeN55g0avmDWyW
AN9o096vaEVWKhZ/jdTHmFVf2PV2Iw==
=rbT5
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.8
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
Commit ba24ea1291 ("net/sched: Retire ipt action") removed the ipt action
but not the testcases. This patch removes the outstanding tdc tests.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The expression "source ../lib.sh" added to net/forwarding/lib.sh in commit
25ae948b44 ("selftests/net: add lib.sh") does not work for tests outside
net/forwarding which source net/forwarding/lib.sh (1). It also does not
work in some cases where only a subset of tests are exported (2).
Avoid the problems mentioned above by replacing the faulty expression with
a copy of the content from net/lib.sh which is used by files under
net/forwarding.
A more thorough solution which avoids duplicating content between
net/lib.sh and net/forwarding/lib.sh has been posted here:
https://lore.kernel.org/netdev/20231222135836.992841-1-bpoirier@nvidia.com/
The approach in the current patch is a stopgap solution to avoid submitting
large changes at the eleventh hour of this development cycle.
Example of problem 1)
tools/testing/selftests/drivers/net/bonding$ ./dev_addr_lists.sh
./net_forwarding_lib.sh: line 41: ../lib.sh: No such file or directory
TEST: bonding cleanup mode active-backup [ OK ]
TEST: bonding cleanup mode 802.3ad [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond down) [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond up) [ OK ]
An error message is printed but since the test does not use functions from
net/lib.sh, the test results are not affected.
Example of problem 2)
tools/testing/selftests$ make install TARGETS="net/forwarding"
tools/testing/selftests$ cd kselftest_install/net/forwarding/
tools/testing/selftests/kselftest_install/net/forwarding$ ./pedit_ip.sh veth{0..3}
lib.sh: line 41: ../lib.sh: No such file or directory
TEST: ping [ OK ]
TEST: ping6 [ OK ]
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
In this case, the test results are affected.
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Suggested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240104141109.100672-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZZgrfgAKCRDbK58LschI
g87JAQDu+oUG3aWnRJi+lJTK8vGnKRuBwUxgnI5Ze99N0tuPmAEAz1gpXLYP+fKE
eqRhZGGhujdHC9if3Le+nG6nvf8Gvw0=
=KPkZ
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-05
We've added 40 non-merge commits during the last 2 day(s) which contain
a total of 73 files changed, 1526 insertions(+), 951 deletions(-).
The main changes are:
1) Fix a memory leak when streaming AF_UNIX sockets were inserted
into multiple sockmap slots/maps, from John Fastabend.
2) Fix gotol in s390 BPF JIT with large offsets, from Ilya Leoshkevich.
3) Fix reattachment branch in bpf_tracing_prog_attach() and reject
the request if there is no valid attach_btf, from Jiri Olsa.
4) Remove deprecated bpfilter kernel leftovers given the project
is developed in user space (https://github.com/facebook/bpfilter),
from Quentin Deslandes.
5) Relax tracing BPF program recursive attach rules given right now
it is not possible to create tracing program call cycles,
from Dmitrii Dolgov.
6) Fix excessive memory consumption for the bpf_global_percpu_ma
for systems with a large number of CPUs, from Yonghong Song.
7) Small x86 BPF JIT cleanup to reuse emit_nops instead of open-coding
memcpy of x86_nops, from Leon Hwang.
8) Follow-up for libbpf to support __arg_ctx global function argument tag
semantics to complement the merged kernel side, from Andrii Nakryiko.
9) Introduce "volatile compare" macros for BPF selftests in order
to make the latter more robust against compiler optimization,
from Alexei Starovoitov.
10) Small simplification in verifier's size checking of helper accesses
along with additional selftests, from Andrei Matei.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (40 commits)
selftests/bpf: Test re-attachment fix for bpf_tracing_prog_attach
bpf: Fix re-attachment branch in bpf_tracing_prog_attach
selftests/bpf: Add test for recursive attachment of tracing progs
bpf: Relax tracing prog recursive attach rules
bpf, x86: Use emit_nops to replace memcpy x86_nops
selftests/bpf: Test gotol with large offsets
selftests/bpf: Double the size of test_loader log
s390/bpf: Fix gotol with large offsets
bpfilter: remove bpfilter
bpf: Remove unnecessary cpu == 0 check in memalloc
selftests/bpf: add __arg_ctx BTF rewrite test
selftests/bpf: add arg:ctx cases to test_global_funcs tests
libbpf: implement __arg_ctx fallback logic
libbpf: move BTF loading step after relocation step
libbpf: move exception callbacks assignment logic into relocation step
libbpf: use stable map placeholder FDs
libbpf: don't rely on map->fd as an indicator of map being created
libbpf: use explicit map reuse flag to skip map creation steps
libbpf: make uniform use of btf__fd() accessor inside libbpf
selftests/bpf: Add a selftest with > 512-byte percpu allocation size
...
====================
Link: https://lore.kernel.org/r/20240105170105.21070-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test for UFFDIO_MOVE ioctl operating on a hugepage which has to be
split because destination is marked with MADV_NOHUGEPAGE. With this we
cover all 3 cases: normal page move, hugepage move, hugepage splitting
before move.
Link: https://lkml.kernel.org/r/20231230025636.2477429-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test depends on writing to nr_hugepages which isn't possible without
root privileges. So skip the test in this case.
Link: https://lkml.kernel.org/r/20240101083614.1076768-2-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240101083614.1076768-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240102053223.2099572-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240102053807.2114200-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240102081919.2325570-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently there is no test which checks that IPv6 extension header packets
successfully coalesce. This commit adds a test, which verifies two IPv6
packets with HBH extension headers do coalesce, and another test which
checks that packets with different extension header data do not coalesce
in GRO.
I changed the receive socket filter to accept a packet with one extension
header. This change exposed a bug in the fragment test -- the old BPF did
not accept the fragment packet. I updated correct_num_packets in the
fragment test accordingly.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/69282fed-2415-47e8-b3d3-34939ec3eb56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case to verify the fix for "prog->aux->dst_trampoline and
tgt_prog is NULL" branch in bpf_tracing_prog_attach. The sequence of
events:
1. load rawtp program
2. load fentry program with rawtp as target_fd
3. create tracing link for fentry program with target_fd = 0
4. repeat 3
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-5-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verify the fact that only one fentry prog could be attached to another
fentry, building up an attachment chain of limited size. Use existing
bpf_testmod as a start of the chain.
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-3-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - regressions:
- Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum
required", it caused issues on networks where routers send prefixes
with preferred_lft=0
- wifi:
- iwlwifi: pcie: don't synchronize IRQs from IRQ, prevent deadlock
- mac80211: fix re-adding debugfs entries during reconfiguration
Current release - new code bugs:
- tcp: print AO/MD5 messages only if there are any keys
Previous releases - regressions:
- virtio_net: fix missing dma unmap for resize, prevent OOM
Previous releases - always broken:
- mptcp: prevent tcp diag from closing listener subflows
- nf_tables:
- set transport header offset for egress hook, fix IPv4 mangling
- skip set commit for deleted/destroyed sets, avoid double deactivation
- nat: make sure action is set for all ct states, fix openvswitch
matching on ICMP packets in related state
- eth: mlxbf_gige: fix receive hang under heavy traffic
- eth: r8169: fix PCI error on system resume for RTL8168FP
- net: add missing getsockopt(SO_TIMESTAMPING_NEW) and cmsg handling
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+se8
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
We haven't accumulated much over the break. If it wasn't for the
uninterrupted stream of fixes for Intel drivers this PR would be very
slim. There was a handful of user reports, however, either they stood
out because of the lower traffic or users have had more time to test
over the break. The ones which are v6.7-relevant should be wrapped up.
Current release - regressions:
- Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum
required", it caused issues on networks where routers send prefixes
with preferred_lft=0
- wifi:
- iwlwifi: pcie: don't synchronize IRQs from IRQ, prevent deadlock
- mac80211: fix re-adding debugfs entries during reconfiguration
Current release - new code bugs:
- tcp: print AO/MD5 messages only if there are any keys
Previous releases - regressions:
- virtio_net: fix missing dma unmap for resize, prevent OOM
Previous releases - always broken:
- mptcp: prevent tcp diag from closing listener subflows
- nf_tables:
- set transport header offset for egress hook, fix IPv4 mangling
- skip set commit for deleted/destroyed sets, avoid double deactivation
- nat: make sure action is set for all ct states, fix openvswitch
matching on ICMP packets in related state
- eth: mlxbf_gige: fix receive hang under heavy traffic
- eth: r8169: fix PCI error on system resume for RTL8168FP
- net: add missing getsockopt(SO_TIMESTAMPING_NEW) and cmsg handling"
* tag 'net-6.7-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net/tcp: Only produce AO/MD5 logs if there are any keys
net: Implement missing SO_TIMESTAMPING_NEW cmsg support
bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()
net: ravb: Wait for operating mode to be applied
asix: Add check for usbnet_get_endpoints
octeontx2-af: Re-enable MAC TX in otx2_stop processing
octeontx2-af: Always configure NIX TX link credits based on max frame size
net/smc: fix invalid link access in dumping SMC-R connections
net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues
virtio_net: fix missing dma unmap for resize
igc: Fix hicredit calculation
ice: fix Get link status data length
i40e: Restore VF MSI-X state during PCI reset
i40e: fix use-after-free in i40e_aqc_add_filters()
net: Save and restore msg_namelen in sock_sendmsg
netfilter: nft_immediate: drop chain reference counter on error
netfilter: nf_nat: fix action not being set for all ct states
net: bcmgenet: Fix FCS generation for fragmented skbuffs
mptcp: prevent tcp diag from closing listener subflows
MAINTAINERS: add Geliang as reviewer for MPTCP
...
Test gotol with offsets that don't fit into a short (i.e., larger than
32k or smaller than -32k).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Testing long jumps requires having >32k instructions. That many
instructions require the verifier log buffer of 2 megabytes.
The regular test_progs run doesn't need an increased buffer, since
gotol test with 40k instructions doesn't request a log,
but test_progs -v will set the verifier log level.
Hence to avoid breaking gotol test with -v increase the buffer size.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
perf test 17 'Setup struct perf_event_attr' fails on s390 z/VM guest,
using linux-next kernel.
Root cause is the fall-back from hardware counter cycles
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
which returns -ENOENT on s390 z/VM guest. This causes the code to fall
back to software counter task-clock, as can be seen in the debug output:
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x1 (PERF_COUNT_SW_TASK_CLOCK) <-here
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
This succeeds on s390 z/VM guest.
This successful installation of the counter task-clock is not listed in
the expected results and the test case fails.
This is caused by commit eb2eac0c7b ("perf evsel: Fallback to
"task-clock" when not system wide") which introduced fall back from
event 'cycles' to event 'task-clock'.
To fix this on s390 allow event number 0 (cycles) and event number 1
(task-clock) as expected result.
Output before:
# ./perf test -Fv 17
17: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-stat-group1'
unsupp './tests/attr/test-stat-group1'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
expected config=0, got 1
FAILED './tests/attr/test-record-graph-default' - match failure
---- end ----
Setup struct perf_event_attr: FAILED!
#
Output after:
# ./perf test -F 17
17: Setup struct perf_event_attr : Ok
#
Fixes: eb2eac0c7b ("perf evsel: Fallback to "task-clock" when not system wide")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20231219143235.1075522-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The addr_location map and maps fields in the inner loop were missing
calls to map__get()/maps__get(). The subsequent addr_location__exit()
call in each loop puts the map/maps fields causing use-after-free
aborts.
This issue reproduces on at least arm64 and x86_64 with something
simple like `perf record -g ls` followed by `perf script -s script.py`
with the following script:
perf_db_export_mode = True
perf_db_export_calls = False
perf_db_export_callchains = True
def sample_table(*args):
print(f'sample_table({args})')
def call_path_table(*args):
print(f'call_path_table({args}')
Committer testing:
This test, just introduced by Ian Rogers, now passes, not segfaulting
anymore:
# perf test "perf script tests"
95: perf script tests : Ok
#
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207140911.3240408-1-ben.gainey@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Start a new set of shell tests for testing perf script. The initial
contribution is checking that some perf db-export functionality works
as reported in this regression by Ben Gainey <ben.gainey@arm.com>:
https://lore.kernel.org/lkml/20231207140911.3240408-1-ben.gainey@arm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ben Gainey <ben.gainey@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207174057.1482161-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
uniq() will write one command name over another causing the overwritten
string to be leaked. Fix by doing a pass that removes duplicates and a
second that removes the holes.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chenyuan Mi <cymi20@fudan.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231208000515.1693746-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In its infinite wisdom, by default, SLang sets susp undef, and this can
only be un-done by calling SLtty_set_suspend_state(true). After every
SLang_init_tty().
Additionally, no provisions are made for maintaining the teletype
attributes across suspend/continue (outside of curses emulation
mode(?!), which provides full support, naturally), so we need to save
and restore the flags ourselves, as well as reset the text colours when
going under. We need to also re-draw the screen, and raising SIGWINCH,
shockingly, Just Works.
The correct solution would be to Not Use SLang, but as a stop-gap,
this makes TUI 'perf report' usable.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yaowenbin <yaowenbin1@huawei.com>
Link: https://lore.kernel.org/r/0354dcae23a8713f75f4fed609e0caec3c6e3cd5.1672174189.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to v1.17 released in:
https://github.com/intel/perfmon/pull/123
Add events FP_ARITH_DISPATCHED.V0, FP_ARITH_DISPATCHED.V1,
FP_ARITH_DISPATCHED.V2, UNC_IIO_IOMMU0.1G_HITS, UNC_IIO_IOMMU0.2M_HITS
and UNC_IIO_IOMMU0.4K_HITS. Description updates.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to v1.23 released in:
https://github.com/intel/perfmon/pull/123
Updates to event descriptions.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to v1.02 released in:
https://github.com/intel/perfmon/pull/123
Removes events AMX_OPS_RETIRED.BF16 and AMX_OPS_RETIRED.INT8. Add
events FP_ARITH_DISPATCHED.V0, FP_ARITH_DISPATCHED.V1,
FP_ARITH_DISPATCHED.V2, UNC_IIO_IOMMU0.1G_HITS, UNC_IIO_IOMMU0.2M_HITS
and UNC_IIO_IOMMU0.4K_HITS. Description updates.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix that the core PMU is being specified for 2 uncore events. Specify
a PMU for the alderlake UNCORE_FREQ metric.
Conversion script updated in:
https://github.com/intel/perfmon/pull/126
Committer testing:
Before this patch the "perf all metricgroups test" was failing, now:
root@number:~# perf test metric
10: PMU events :
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
10.5: Parsing of metric thresholds with fake PMUs : Ok
61: Parse and process metrics : Ok
98: perf stat metrics (shadow stat) test : Skip
101: perf all metricgroups test : Ok
102: perf all metrics test : FAILED!
107: perf metrics value validation : Ok
root@number:~#
Test 102 is failing for another reason, not being able to get as many
counters as needed, Ian Rogers suggested disabling the NMI watchdog to
have more counters available:
root@number:/home/acme# cat /proc/sys/kernel/nmi_watchdog
1
root@number:/home/acme# echo 0 > /proc/sys/kernel/nmi_watchdog
root@number:/home/acme# perf test 102
102: perf all metrics test : Ok
root@number:/home/acme#
Closes: https://lore.kernel.org/lkml/ZZWOdHXJJ_oecWwm@kernel.org/
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* for-next/selftests:
kselftest/arm64: Don't probe the current VL for unsupported vector types
kselftest/arm64: Log SVCR when the SME tests barf
kselftest/arm64: Improve output for skipped TPIDR2 ABI test
Add a test validating that libbpf uploads BTF and func_info with
rewritten type information for arguments of global subprogs that are
marked with __arg_ctx tag.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a few extra cases of global funcs with context arguments. This time
rely on "arg:ctx" decl_tag (__arg_ctx macro), but put it next to
"classic" cases where context argument has to be of an exact type that
BPF verifier expects (e.g., bpf_user_pt_regs_t for kprobe/uprobe).
Colocating all these cases separately from other global func args that
rely on arg:xxx decl tags (in verifier_global_subprogs.c) allows for
simpler backwards compatibility testing on old kernels. All the cases in
test_global_func_ctx_args.c are supposed to work on older kernels, which
was manually validated during development.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Out of all special global func arg tag annotations, __arg_ctx is
practically is the most immediately useful and most critical to have
working across multitude kernel version, if possible. This would allow
end users to write much simpler code if __arg_ctx semantics worked for
older kernels that don't natively understand btf_decl_tag("arg:ctx") in
verifier logic.
Luckily, it is possible to ensure __arg_ctx works on old kernels through
a bit of extra work done by libbpf, at least in a lot of common cases.
To explain the overall idea, we need to go back at how context argument
was supported in global funcs before __arg_ctx support was added. This
was done based on special struct name checks in kernel. E.g., for
BPF_PROG_TYPE_PERF_EVENT the expectation is that argument type `struct
bpf_perf_event_data *` mark that argument as PTR_TO_CTX. This is all
good as long as global function is used from the same BPF program types
only, which is often not the case. If the same subprog has to be called
from, say, kprobe and perf_event program types, there is no single
definition that would satisfy BPF verifier. Subprog will have context
argument either for kprobe (if using bpf_user_pt_regs_t struct name) or
perf_event (with bpf_perf_event_data struct name), but not both.
This limitation was the reason to add btf_decl_tag("arg:ctx"), making
the actual argument type not important, so that user can just define
"generic" signature:
__noinline int global_subprog(void *ctx __arg_ctx) { ... }
I won't belabor how libbpf is implementing subprograms, see a huge
comment next to bpf_object_relocate_calls() function. The idea is that
each main/entry BPF program gets its own copy of global_subprog's code
appended.
This per-program copy of global subprog code *and* associated func_info
.BTF.ext information, pointing to FUNC -> FUNC_PROTO BTF type chain
allows libbpf to simulate __arg_ctx behavior transparently, even if the
kernel doesn't yet support __arg_ctx annotation natively.
The idea is straightforward: each time we append global subprog's code
and func_info information, we adjust its FUNC -> FUNC_PROTO type
information, if necessary (that is, libbpf can detect the presence of
btf_decl_tag("arg:ctx") just like BPF verifier would do it).
The rest is just mechanical and somewhat painful BTF manipulation code.
It's painful because we need to clone FUNC -> FUNC_PROTO, instead of
reusing it, as same FUNC -> FUNC_PROTO chain might be used by another
main BPF program within the same BPF object, so we can't just modify it
in-place (and cloning BTF types within the same struct btf object is
painful due to constant memory invalidation, see comments in code).
Uploaded BPF object's BTF information has to work for all BPF
programs at the same time.
Once we have FUNC -> FUNC_PROTO clones, we make sure that instead of
using some `void *ctx` parameter definition, we have an expected `struct
bpf_perf_event_data *ctx` definition (as far as BPF verifier and kernel
is concerned), which will mark it as context for BPF verifier. Same
global subprog relocated and copied into another main BPF program will
get different type information according to main program's type. It all
works out in the end in a completely transparent way for end user.
Libbpf maintains internal program type -> expected context struct name
mapping internally. Note, not all BPF program types have named context
struct, so this approach won't work for such programs (just like it
didn't before __arg_ctx). So native __arg_ctx is still important to have
in kernel to have generic context support across all BPF program types.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With all the preparations in previous patches done we are ready to
postpone BTF loading and sanitization step until after all the
relocations are performed.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the logic of finding and assigning exception callback indices from
BTF sanitization step to program relocations step, which seems more
logical and will unblock moving BTF loading to after relocation step.
Exception callbacks discovery and assignment has no dependency on BTF
being loaded into the kernel, it only uses BTF information. It does need
to happen before subprogram relocations happen, though. Which is why the
split.
No functional changes.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move map creation to later during BPF object loading by pre-creating
stable placeholder FDs (utilizing memfd_create()). Use dup2()
syscall to then atomically make those placeholder FDs point to real
kernel BPF map objects.
This change allows to delay BPF map creation to after all the BPF
program relocations. That, in turn, allows to delay BTF finalization and
loading into kernel to after all the relocations as well. We'll take
advantage of the latter in subsequent patches to allow libbpf to adjust
BTF in a way that helps with BPF global function usage.
Clean up a few places where we close map->fd, which now shouldn't
happen, because map->fd should be a valid FD regardless of whether map
was created or not. Surprisingly and nicely it simplifies a bunch of
error handling code. If this change doesn't backfire, I'm tempted to
pre-create such stable FDs for other entities (progs, maybe even BTF).
We previously did some manipulations to make gen_loader work with fake
map FDs, with stable map FDs this hack is not necessary for maps (we
still have it for BTF, but I left it as is for now).
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With the upcoming switch to preallocated placeholder FDs for maps,
switch various getters/setter away from checking map->fd. Use
map_is_created() helper that detect whether BPF map can be modified based
on map->obj->loaded state, with special provision for maps set up with
bpf_map__reuse_fd().
For backwards compatibility, we take map_is_created() into account in
bpf_map__fd() getter as well. This way before bpf_object__load() phase
bpf_map__fd() will always return -1, just as before the changes in
subsequent patches adding stable map->fd placeholders.
We also get rid of all internal uses of bpf_map__fd() getter, as it's
more oriented for uses external to libbpf. The above map_is_created()
check actually interferes with some of the internal uses, if map FD is
fetched through bpf_map__fd().
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of inferring whether map already point to previously
created/pinned BPF map (which user can specify with bpf_map__reuse_fd()) API),
use explicit map->reused flag that is set in such case.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It makes future grepping and code analysis a bit easier.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a selftest to capture the verification failure when the allocation
size is greater than 512.
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031812.1293190-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the previous patch, the maximum data size for bpf_global_percpu_ma
is 512 bytes. This breaks selftest test_bpf_ma. The test is adjusted
in two aspects:
- Since the maximum allowed data size for bpf_global_percpu_ma is
512, remove all tests beyond that, names sizes 1024, 2048 and 4096.
- Previously the percpu data size is bucket_size - 8 in order to
avoid percpu allocation into the next bucket. This patch removed
such data size adjustment thanks to Patch 1.
Also, a better way to generate BTF type is used than adding
a member to the value struct.
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031807.1292853-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The patch set [1] added a general lib.sh in net selftests, and converted
several test scripts to source the lib.sh.
unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2])
have a /bin/sh shebang which may point to various shells in different
distributions, but "source" is only available in some of them. For
example, "source" is a built-it function in bash, but it cannot be
used in dash.
Refer to other scripts that were converted together, simply change the
shebang to bash to fix the following issues when the default /bin/sh
points to other shells.
not ok 51 selftests: net: unicast_extensions.sh # exit=1
v1 -> v2:
- Fix pmtu.sh which has the same issue as unicast_extensions.sh,
suggested by Hangbin
- Change the style of the "source" line to be consistent with other
tests, suggested by Hangbin
Link: https://lore.kernel.org/all/20231202020110.362433-1-liuhangbin@gmail.com/ [1]
Link: https://lore.kernel.org/all/20231219094856.1740079-1-liuhangbin@gmail.com/ [2]
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 378f082eaf ("selftests/net: convert pmtu.sh to run it in unique namespace")
Fixes: 0f4765d0b4 ("selftests/net: convert unicast_extensions.sh to run it in unique namespace")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20231229131931.3961150-1-yujie.liu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test that replaces the same socket with itself. This exercises a
corner case where old element and new element have the same posck.
Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-6-john.fastabend@gmail.com
Add test with multiple maps where each socket is inserted in multiple
maps. Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-5-john.fastabend@gmail.com
Add test with a single map where each socket is inserted multiple
times. Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-4-john.fastabend@gmail.com
The cpu-cycles event is both a legacy event and declared in
/sys/devices/cpu_core/events/cpu-cycles. The cycles event is a legacy
event but with no sysfs version.
Add a test that the sysfs version is preferred to the legacy for
cpu-cycles, while for cycles we use the legacy version.
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240103170159.1435753-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The legacy events cpu-cycles and instructions have sysfs event
equivalents on x86 (see /sys/devices/cpu_core/events).
As sysfs/JSON events are now higher in priority than legacy events this
causes the hybrid test expectations not to be met.
To fix this switch to legacy events that don't have sysfs versions,
namely cpu-cycles becomes cycles and instructions becomes branches.
Fixes: a24d9d9dc0 ("perf parse-events: Make legacy events lower priority than sysfs/JSON")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/lkml/ZYbm5L7tw7bdpDpE@kernel.org/
Link: https://lore.kernel.org/r/20240103170159.1435753-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the jevents parser aware of the Unified Memory Controller (UMC) PMU
and add events taken from Section 8.2.1 "UMC Performance Monitor Events"
of the Processor Programming Reference (PPR) for AMD Family 19h Model 11h
processors. The events capture UMC command activity such as CAS, ACTIVATE,
PRECHARGE etc. while the metrics derive data bus utilization and memory
bandwidth out of these events.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/e0d8a7e8ca8ee3e378d8029e80b456ac327d6419.1701238314.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copy-paste error where LL cache misses are reported as l1i.
Fixes: 0a57b91080 ("perf stat: Use counts rather than saved_value")
Suggested-by: Guillaume Endignoux <guillaumee@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231211181242.1721059-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reduce from PERF_SAMPLE_MAX_SIZE to "sizeof(*lost) +
session->machines.host.id_hdr_size".
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207021627.1322884-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add variants of perf_env__insert_bpf_prog_info(), perf_env__insert_btf()
and perf_env__find_btf prefixed with __ to indicate the
env->bpf_progs.lock is assumed held.
Call these variants when the lock is held to avoid recursively taking it
and potentially having a thread deadlock with itself.
Fixes: f8dfeae009 ("perf bpf: Show more BPF program info in print_bpf_prog_info()")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20231207014655.1252484-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_nop_mov(var) asm macro emits nop register move: rX = rX.
If 'var' is a scalar and not a fixed constant the verifier will assign ID to it.
If it's later spilled the stack slot will carry that ID as well.
Hence the range refining comparison "if rX < const" will update all copies
including spilled slot.
This macro is a temporary workaround until the verifier gets smarter.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231226191148.48536-6-alexei.starovoitov@gmail.com
Since the last user was converted to bpf_cmp, remove bpf_assert_eq/ne/... macros.
__bpf_assert_op() macro is kept for experiments, since it's slightly more efficient
than bpf_assert(bpf_cmp_unlikely()) until LLVM is fixed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20231226191148.48536-5-alexei.starovoitov@gmail.com
Convert exceptions_assert.c to bpf_cmp_unlikely() macro.
Since
bpf_assert(bpf_cmp_unlikely(var, ==, 100));
other code;
will generate assembly code:
if r1 == 100 goto L2;
r0 = 0
call bpf_throw
L1:
other code;
...
L2: goto L1;
LLVM generates redundant basic block with extra goto. LLVM will be fixed eventually.
Right now it's less efficient than __bpf_assert(var, ==, 100) macro that produces:
if r1 == 100 goto L1;
r0 = 0
call bpf_throw
L1:
other code;
But extra goto doesn't hurt the verification process.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20231226191148.48536-4-alexei.starovoitov@gmail.com
Compilers optimize conditional operators at will, but often bpf programmers
want to force compilers to keep the same operator in asm as it's written in C.
Introduce bpf_cmp_likely/unlikely(var1, conditional_op, var2) macros that can be used as:
- if (seen >= 1000)
+ if (bpf_cmp_unlikely(seen, >=, 1000))
The macros take advantage of BPF assembly that is C like.
The macros check the sign of variable 'seen' and emits either
signed or unsigned compare.
For example:
int a;
bpf_cmp_unlikely(a, >, 0) will be translated to 'if rX s> 0 goto' in BPF assembly.
unsigned int a;
bpf_cmp_unlikely(a, >, 0) will be translated to 'if rX > 0 goto' in BPF assembly.
C type conversions coupled with comparison operator are tricky.
int i = -1;
unsigned int j = 1;
if (i < j) // this is false.
long i = -1;
unsigned int j = 1;
if (i < j) // this is true.
Make sure BPF program is compiled with -Wsign-compare then the macros will catch
the mistake.
The macros check LHS (left hand side) only to figure out the sign of compare.
'if 0 < rX goto' is not allowed in the assembly, so the users
have to use a variable on LHS anyway.
The patch updates few tests to demonstrate the use of the macros.
The macro allows to use BPF_JSET in C code, since LLVM doesn't generate it at
present. For example:
if (i & j) compiles into r0 &= r1; if r0 == 0 goto
while
if (bpf_cmp_unlikely(i, &, j)) compiles into if r0 & r1 goto
Note that the macros has to be careful with RHS assembly predicate.
Since:
u64 __rhs = 1ull << 42;
asm goto("if r0 < %[rhs] goto +1" :: [rhs] "ri" (__rhs));
LLVM will silently truncate 64-bit constant into s32 imm.
Note that [lhs] "r"((short)LHS) the type cast is a workaround for LLVM issue.
When LHS is exactly 32-bit LLVM emits redundant <<=32, >>=32 to zero upper 32-bits.
When LHS is 64 or 16 or 8-bit variable there are no shifts.
When LHS is 32-bit the (u64) cast doesn't help. Hence use (short) cast.
It does _not_ truncate the variable before it's assigned to a register.
Traditional likely()/unlikely() macros that use __builtin_expect(!!(x), 1 or 0)
have no effect on these macros, hence macros implement the logic manually.
bpf_cmp_unlikely() macro preserves compare operator as-is while
bpf_cmp_likely() macro flips the compare.
Consider two cases:
A.
for() {
if (foo >= 10) {
bar += foo;
}
other code;
}
B.
for() {
if (foo >= 10)
break;
other code;
}
It's ok to use either bpf_cmp_likely or bpf_cmp_unlikely macros in both cases,
but consider that 'break' is effectively 'goto out_of_the_loop'.
Hence it's better to use bpf_cmp_unlikely in the B case.
While 'bar += foo' is better to keep as 'fallthrough' == likely code path in the A case.
When it's written as:
A.
for() {
if (bpf_cmp_likely(foo, >=, 10)) {
bar += foo;
}
other code;
}
B.
for() {
if (bpf_cmp_unlikely(foo, >=, 10))
break;
other code;
}
The assembly will look like:
A.
for() {
if r1 < 10 goto L1;
bar += foo;
L1:
other code;
}
B.
for() {
if r1 >= 10 goto L2;
other code;
}
L2:
The bpf_cmp_likely vs bpf_cmp_unlikely changes basic block layout, hence it will
greatly influence the verification process. The number of processed instructions
will be different, since the verifier walks the fallthrough first.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20231226191148.48536-3-alexei.starovoitov@gmail.com
GCC's -Wall includes -Wsign-compare while clang does not.
Since BPF programs are built with clang we need to add this flag explicitly
to catch problematic comparisons like:
int i = -1;
unsigned int j = 1;
if (i < j) // this is false.
long i = -1;
unsigned int j = 1;
if (i < j) // this is true.
C standard for reference:
- If either operand is unsigned long the other shall be converted to unsigned long.
- Otherwise, if one operand is a long int and the other unsigned int, then if a
long int can represent all the values of an unsigned int, the unsigned int
shall be converted to a long int; otherwise both operands shall be converted to
unsigned long int.
- Otherwise, if either operand is long, the other shall be converted to long.
- Otherwise, if either operand is unsigned, the other shall be converted to unsigned.
Unfortunately clang's -Wsign-compare is very noisy.
It complains about (s32)a == (u32)b which is safe and doen't have surprising behavior.
This patch fixes some of the issues. It needs a follow up to fix the rest.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20231226191148.48536-2-alexei.starovoitov@gmail.com
This patch adds a test for the condition that the previous patch mucked
with - illegal zero-sized helper memory access. As opposed to existing
tests, this new one uses a size whose lower bound is zero, as opposed to
a known-zero one.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231221232225.568730-3-andreimatei1@gmail.com
This patch simplifies the verification of size arguments associated to
pointer arguments to helpers and kfuncs. Many helpers take a pointer
argument followed by the size of the memory access performed to be
performed through that pointer. Before this patch, the handling of the
size argument in check_mem_size_reg() was confusing and wasteful: if the
size register's lower bound was 0, then the verification was done twice:
once considering the size of the access to be the lower-bound of the
respective argument, and once considering the upper bound (even if the
two are the same). The upper bound checking is a super-set of the
lower-bound checking(*), except: the only point of the lower-bound check
is to handle the case where zero-sized-accesses are explicitly not
allowed and the lower-bound is zero. This static condition is now
checked explicitly, replacing a much more complex, expensive and
confusing verification call to check_helper_mem_access().
Error messages change in this patch. Before, messages about illegal
zero-size accesses depended on the type of the pointer and on other
conditions, and sometimes the message was plain wrong: in some tests
that changed you'll see that the old message was something like "R1 min
value is outside of the allowed memory range", where R1 is the pointer
register; the error was wrongly claiming that the pointer was bad
instead of the size being bad. Other times the information that the size
came for a register with a possible range of values was wrong, and the
error presented the size as a fixed zero. Now the errors refer to the
right register. However, the old error messages did contain useful
information about the pointer register which is now lost; recovering
this information was deemed not important enough.
(*) Besides standing to reason that the checks for a bigger size access
are a super-set of the checks for a smaller size access, I have also
mechanically verified this by reading the code for all types of
pointers. I could convince myself that it's true for all but
PTR_TO_BTF_ID (check_ptr_to_btf_access). There, simply looking
line-by-line does not immediately prove what we want. If anyone has any
qualms, let me know.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231221232225.568730-2-andreimatei1@gmail.com
Test the RISCV_HWPROBE_WHICH_CPUS flag of hwprobe. The test also
has a command line interface in order to get the cpu list for
arbitrary hwprobe pairs.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231122164700.127954-10-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The "count" parameter associated with the 'cpus' parameter of the
hwprobe syscall is the size in bytes of 'cpus'. Naming it 'cpu_count'
may mislead users (it did me) to think it's the number of CPUs that
are or can be represented by 'cpus' instead. This is particularly
easy (IMO) to get wrong since 'cpus' is documented to be defined by
CPU_SET(3) and CPU_SET(3) also documents a CPU_COUNT() (the number
of CPUs in set) macro. CPU_SET(3) refers to the size of cpu sets
with 'setsize'. Adopt 'cpusetsize' for the hwprobe parameter and
specifically state it is in bytes in Documentation/riscv/hwprobe.rst
to clarify.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231122164700.127954-7-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
-----BEGIN PGP SIGNATURE-----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=FeiG
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.8-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
Commit 051d442098 ("net/sched: Retire CBQ qdisc") retired the CBQ qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fb38306ceb ("net/sched: Retire ATM qdisc") retired the ATM qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit bbe77c14ee ("net/sched: Retire dsmark qdisc") retired the dsmark
classifier. Remove UAPI support for it.
Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 8c710f7525 ("net/sched: Retire tcindex classifier") retired the TC
tcindex classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 265b4da82d ("net/sched: Retire rsvp classifier") retired the TC RSVP
classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to commit be80942465 ("selftests: bonding: do not set port down
before adding to bond"). The bond-arp-interval-causes-panic test failed
after commit a4abfa627c ("net: rtnetlink: Enslave device before bringing
it up") as the kernel will set the port down _after_ adding to bond if setting
port down specifically.
Fix it by removing the link down operation when adding to bond.
Fixes: 2ffd57327f ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new helper chk_msk_cestab() to check the current
established connections counter MIB_CURRESTAB in diag.sh. Invoke it
to check the counter during the connection after every chk_msk_inuse().
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new helper chk_cestab_nr() to check the current
established connections counter MIB_CURRESTAB. Set the newly added
variables cestab_ns1 and cestab_ns2 to indicate how many connections
are expected in ns1 or ns2.
Invoke check_cestab() to check the counter during the connection in
do_transfer() and invoke chk_cestab_nr() to re-check it when the
connection closed. These checks are embedded in add_tests().
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit f5769faeec ("net: Namespace-ify sysctl_optmem_max")
optmem_max is per-netns, so need of switching to root namespace.
It seems trivial to keep the old logic working, so going to keep it for
a while (at least, until kernel with netns-optmem_max will be release).
Currently, there is a test that checks that optmem_max limit applies to
TCP-AO keys and a little benchmark that measures linked-list TCP-AO keys
scaling, those are fixed by this.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In unsigned-md5 selftests ip_route_add() is not needed in
client_add_ip(): the route was pre-setup in __test_init() => link_init()
for subnet, rather than a specific ip-address.
Currently, __ip_route_add() mistakenly always sets VRF table
to RT_TABLE_MAIN - this seems to have sneaked in during unsigned-md5
tests debugging. That also explains, why ip_route_add_vrf() ignored
EEXIST, returned by fib6.
Yet, keep EEXIST ignoring in bench-lookups selftests as it's expected
that those selftests may add the same (duplicate) routes.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tc ipt action was intended to run all netfilter/iptables target.
Unfortunately it has not benefitted over the years from proper updates when
netfilter changes, and for that reason it has remained rudimentary.
Pinging a bunch of people that i was aware were using this indicates that
removing it wont affect them.
Retire it to reduce maintenance efforts. Buh-bye.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following warnings are shown during compilation:
tui.c: In function 'show_cooling_device':
tui.c:216:40: warning: format '%d' expects argument of type 'int', but
argument 7 has type 'long unsigned int' [-Wformat=]
216 | "%02d %12.12s%6d %6d",
| ~~^
| |
| int
| %6ld
......
219 | ptdata.cdi[j].cur_state,
| ~~~~~~~~~~~~~~~~~~~~~~~
| |
| long unsigned int
tui.c:216:44: warning: format '%d' expects argument of type 'int', but
argument 8 has type 'long unsigned int' [-Wformat=]
216 | "%02d %12.12s%6d %6d",
| ~~^
| |
| int
| %6ld
......
220 | ptdata.cdi[j].max_state);
| ~~~~~~~~~~~~~~~~~~~~~~~
| |
| long unsigned int
To fix this, the correct string format must be used for printing.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231204141335.2798194-1-fe@dev.tdt.de
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmWFd9oACgkQ1V2XiooU
IOTBog//auEj3LR5v2b5et6CLsuMESsCFkVko1AFdzzpu94sJ8TTkqlrW7SPSfPW
CMNYz1EYFaRGK1GjfH0a49EUofeU/kPD/TmffmiYwuJlGyEIXp17ZIUQnGDrM6Mz
UBHX8VrW73McJYuZJbxM4HX6Q3aFyshKy8iOPpffdFAQcCD5XtkYbW24Mzw6V4sI
8fBz6C/iT+5Jq1wGtvM2xmGkNYuMLJxbf9qOpinRZCXQV/z5IWda/bFnv3kpJ9mR
x2ZYXHnzFEr2gVFIhZ7G6FvMgQAkkKGVQE+n9zVZ9V78czqBk9depdeLaq/RYGyx
8VYqJyaXHKQm7FqsBwSSxU964aQhi/zNrjF9SeJSfcRNhTmXgzdERndVWVjUPe9O
rFLyQVoQ6JyKy5++1lL3+63cd6ZeGw8gUw8MCw9DX8rwamnNFunUsixKv4SLzQHA
jfFgmAUq+HVWHXI4xmj+SDO8g+s7O3BpbZM09E3si6lwy4/LiQqHhV4sNgEVN/It
hf76t/U6GRYZ0Hwy2dwQl8SZg1BxMSGFmzB7vyEZyGXaqxRZb1Jym4h9slOMKXWl
gS5y4y0ZVTmzRCqJR+jUrMAKPCw/R964LrslDYwQpsQeP7nuUPeU5jH1VWD6kAbS
Vc36uDRnfojoNiRcmAfuhvZIseM1+hI6UXCIsqYR6cekCFlBad8=
=+Uvv
-----END PGP SIGNATURE-----
Merge tag 'nf-next-23-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
netfilter pull request 23-12-22
The following patchset contains Netfilter updates for net-next:
1) Add locking for NFT_MSG_GETSETELEM_RESET requests, to address a
race scenario with two concurrent processes running a dump-and-reset
which exposes negative counters to userspace, from Phil Sutter.
2) Use GFP_KERNEL in pipapo GC, from Florian Westphal.
3) Reorder nf_flowtable struct members, place the read-mostly parts
accessed by the datapath first. From Florian Westphal.
4) Set on dead flag for NFT_MSG_NEWSET in abort path,
from Florian Westphal.
5) Support filtering zone in ctnetlink, from Felix Huettner.
6) Bail out if user tries to redefine an existing chain with different
type in nf_tables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZYVEqQAKCRDbK58LschI
gzH6AP9hVXLpHFTWMT0+2GK2lx69VX8zW1C0SmN7WHaxUbPN9QEAwzGnELfKk00P
0IKRHSl5abhVMX7JOM3sSOhCILeKjQg=
=wRLJ
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next-for-netdev
The following pull-request contains BPF updates for your *net-next* tree.
We've added 22 non-merge commits during the last 3 day(s) which contain
a total of 23 files changed, 652 insertions(+), 431 deletions(-).
The main changes are:
1) Add verifier support for annotating user's global BPF subprogram arguments
with few commonly requested annotations for a better developer experience,
from Andrii Nakryiko.
These tags are:
- Ability to annotate a special PTR_TO_CTX argument
- Ability to annotate a generic PTR_TO_MEM as non-NULL
2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from
Menglong Dong.
3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao.
4) Re-support uid/gid options when mounting bpffs which had to be reverted with
the prior token series revert to avoid conflicts, from Daniel Borkmann.
5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found
from fuzzing the library with malformed ELF files, from Mingyi Zhang.
6) Skip DWARF sections in libbpf's linker sanity check given compiler options to
generate compressed debug sections can trigger a rejection due to misalignment,
from Alyssa Ross.
7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman.
8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add SBI STA and its two registers to the get-reg-list test.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
With the introduction of steal-time accounting support for
RISC-V KVM we can add RISC-V support to the steal_time test.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add guest_sbi_probe_extension(), allowing guest code to probe for
SBI extensions. As guest_sbi_probe_extension() needs
SBI_ERR_NOT_SUPPORTED, take the opportunity to bring in all SBI
error codes. We don't bring in all current extension IDs or base
extension function IDs though, even though we need one of each,
because we'd prefer to bring those in as necessary.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
sbi_ecall() isn't ucall specific and its prototype is already in
processor.h. Move its implementation to processor.c.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
When running tests on a CI system (e.g. LAVA) it is useful to output test
results in TAP (Test Anything Protocol) format so that the CI can parse
the fine-grained results to show regressions. Many of the mm selftest
binaries already output using the TAP format. And the kselftests runner
(run_kselftest.sh) also uses the format. CI systems such as LAVA can
already handle nested TAP reports. However, with the mm selftests we have
3 levels of nesting (run_kselftest.sh -> run_vmtests.sh -> individual test
binaries) and the middle level did not previously support TAP, which
breaks the parser.
Let's fix that by teaching run_vmtests.sh to output using the TAP format.
Ideally this would be opt-in via a command line argument to avoid the
possibility of breaking anyone's existing scripts that might scrape the
output. However, it is not possible to pass arguments to tests invoked
via run_kselftest.sh. So I've implemented an opt-out option (-n), which
will revert to the existing output format.
Future changes to this file should be aware of 2 new conventions:
- output that is part of the TAP reporting is piped through tap_output
- general output is piped through tap_prefix
Link: https://lkml.kernel.org/r/20231214162434.3580009-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add tests for new UFFDIO_MOVE ioctl which uses uffd to move source into
destination buffer while checking the contents of both after the move.
After the operation the content of the destination buffer should match the
original source buffer's content while the source buffer should be zeroed.
Separate tests are designed for PMD aligned and unaligned cases because
they utilize different code paths in the kernel.
Link: https://lkml.kernel.org/r/20231206103702.3873743-6-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently each test can specify unique operations using uffd_test_ops,
however these operations are per-memory type and not per-test. Add
uffd_test_case_ops which each test case can customize for its own needs
regardless of the memory type being used. Pre- and post-allocation
operations are added, some of which will be used in the next patch to
implement test-specific operations like madvise after memory is allocated
but before it is accessed.
Link: https://lkml.kernel.org/r/20231206103702.3873743-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
uffd_test_ctx_clear() is being called from uffd_test_ctx_init() to unmap
areas used in the previous test run. This approach is problematic because
while unmapping areas uffd_test_ctx_clear() uses page_size and nr_pages
which might differ from one test run to another. Fix this by calling
uffd_test_ctx_clear() after each test is done.
Link: https://lkml.kernel.org/r/20231206103702.3873743-4-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SBI extension registers may not be present and indeed when
running on a platform without sscofpmf the PMU SBI extension
is not. Move the SBI extension registers from the base set of
registers to the filter list. Individual configs should test
for any that may or may not be present separately. Since
the PMU extension may disappear and the DBCN extension is only
present in later kernels, separate them from the rest into
their own configs. The rest are lumped together into the same
config.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Always use register subtypes in the get-reg-list test when registers
have them. The only registers neglecting to do so were ISA extension
registers. While we don't really need to use KVM_REG_RISCV_ISA_SINGLE
(since it's zero), the main purpose is to avoid confusion and to
self-document the tests. Also add print support for the multi
registers like SBI extensions have, even though they're only used for
debugging.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
While adding RISCV_SBI_EXT_REG(), acknowledge that some registers
have subtypes and extend __kvm_reg_id() to take a subtype field.
Then, update all macros to set the new field appropriately. The
general CSR macro gets renamed to include "GENERAL", but the other
macros, like the new RISCV_SBI_EXT_REG, just use the SINGLE subtype.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
These registers are no longer getting added to get-reg-list.
We keep sbi_ext_multi_id_to_str() for printing, even though
we don't expect it to normally be used, because it may be
useful for debug.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Various ISA extension reg_list have common pattern so let us generate
these using macros.
We define two macros for the above purpose:
1) KVM_ISA_EXT_SIMPLE_CONFIG - Macro to generate reg_list for
ISA extension without any additional ONE_REG registers
2) KVM_ISA_EXT_SUBLIST_CONFIG - Macro to generate reg_list for
ISA extension with additional ONE_REG registers
This patch also adds the missing config for svnapot.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
In some cases the result of test were hidden inside the stdout and it
was difficult to identify when a test was skipped and why.
List of changes
1. Capitalize all the words that express a test result : "OK", "SKIPPED"
and "FAIL".
2. Place all test result text at the end of the message. This will
prevent the result from being hidden when stdout is verbose.
3. Any other explanation that comes after the result text will be placed
in a new line.
4. All failures are marked as "FAIL"
5. Pipped the failure to stderr in tests 8, 9, 10.
6. Replaced bogus "FAIL" with "SKIPPED" in test 0007
7. All "..." are prefixed and followed by a space.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Basic test to ensure that empty directories can be registered and that
they in turn can serve as a base dir for other registrations.
Add one test to the sysctl selftest module. It first registers an empty
directory under "empty_add" and then uses that as a base to register
another empty dir.
The sysctl bash script then checks that "empty_add" is present and that
there an empty directory within it.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
are not considered backporting material.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZYys4AAKCRDdBJ7gKXxA
jtmaAQC+o04Ia7IfB8MIqp1p7dNZQo64x/EnGA8YjUnQ8N6IwQD+ImU7dHl9g9Oo
ROiiAbtMRBUfeJRsExX/Yzc1DV9E9QM=
=ZGcs
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues
or are not considered backporting material"
* tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add an old address for Naoya Horiguchi
mm/memory-failure: cast index to loff_t before shifting it
mm/memory-failure: check the mapcount of the precise page
mm/memory-failure: pass the folio and the page to collect_procs()
selftests: secretmem: floor the memory size to the multiple of page_size
mm: migrate high-order folios in swap cache correctly
maple_tree: do not preallocate nodes for slot stores
mm/filemap: avoid buffered read/write race to read inconsistent data
kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset
kexec: select CRYPTO from KEXEC_FILE instead of depending on it
kexec: fix KEXEC_FILE dependencies
Since previous commit, MPTCP has support for IP_BIND_ADDRESS_NO_PORT and
IP_LOCAL_PORT_RANGE sockopts.
Add ip4_mptcp and ip6_mptcp fixture variants to ip_local_port_range
selftest to provide selftest coverage for these sockopts.
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is for a debugging purpose. It'd be useful to see per-instrucion
level success/failure stats.
$ perf annotate --data-type --insn-stat
Annotate Instruction stats
total 264, ok 143 (54.2%), bad 121 (45.8%)
Name : Good Bad
-----------------------------------------------------------
movq : 45 31
movl : 22 11
popq : 0 19
cmpl : 16 3
addq : 8 7
cmpq : 11 3
cmpxchgl : 3 7
cmpxchgq : 8 0
incl : 3 3
movzbl : 4 2
incq : 4 2
decl : 6 0
...
Committer notes:
So these are about being able to find the type for accesses from these
instructions, we should improve the naming, but it is for debugging, we
can improve this later:
@@ -3726,6 +3759,10 @@ struct annotated_data_type *hist_entry__get_data_type(struct hist_entry *he)
continue;
mem_type = find_data_type(ms, ip, op_loc->reg, op_loc->offset);
+ if (mem_type)
+ istat->good++;
+ else
+ istat->bad++;
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-18-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --type-stat option is to be used with --data-type and to print
detailed failure reasons for the data type annotation.
$ perf annotate --data-type --type-stat
Annotate data type stats:
total 294, ok 116 (39.5%), bad 178 (60.5%)
-----------------------------------------------------------
30 : no_sym
40 : no_insn_ops
33 : no_mem_ops
63 : no_var
4 : no_typeinfo
8 : bad_offset
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-17-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support data type annotation with new --data-type option. It internally
uses type sort key to collect sample histogram for the type and display
every members like below.
$ perf annotate --data-type
...
Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples):
============================================================================
samples offset size field
13 0 640 struct cfs_rq {
2 0 16 struct load_weight load {
2 0 8 unsigned long weight;
0 8 4 u32 inv_weight;
};
0 16 8 unsigned long runnable_weight;
0 24 4 unsigned int nr_running;
1 28 4 unsigned int h_nr_running;
...
For simplicity it prints the number of samples per field for now.
But it should be easy to show the overhead percentage instead.
The number at the outer struct is a sum of the numbers of the inner
members. For example, struct cfs_rq got total 13 samples, and 2 came
from the load (struct load_weight) and 1 from h_nr_running. Similarly,
the struct load_weight got total 2 samples and they all came from the
weight field.
I've added two new flags in the symbol_conf for this. The
annotate_data_member is to get the members of the type. This is also
needed for perf report with typeoff sort key. The annotate_data_sample
is to update sample stats for each offset and used only in annotate.
Currently it only support stdio output mode, TUI support can be added
later.
Committer testing:
With the perf.data from the previous csets, a very simple, short
duration one:
# perf annotate --data-type
Annotate type: 'struct list_head' in [kernel.kallsyms] (1 samples):
============================================================================
samples offset size field
1 0 16 struct list_head {
0 0 8 struct list_head* next;
1 8 8 struct list_head* prev;
};
Annotate type: 'char' in [kernel.kallsyms] (1 samples):
============================================================================
samples offset size field
1 0 1 char ;
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-15-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The typeoff sort key shows the data type name, offset and the name of
the field. This is useful to see which field in the struct is accessed
most frequently.
$ perf report -s type,typeoff --hierarchy --stdio
...
# Overhead Data Type / Data Type Offset
# ............ ............................
#
...
1.23% struct cfs_rq
0.19% struct cfs_rq +404 (throttle_count)
0.19% struct cfs_rq +0 (load.weight)
0.19% struct cfs_rq +336 (leaf_cfs_rq_list.next)
0.09% struct cfs_rq +272 (propagate)
0.09% struct cfs_rq +196 (removed.nr)
0.09% struct cfs_rq +80 (curr)
0.09% struct cfs_rq +544 (lt_b_children_throttled)
0.06% struct cfs_rq +320 (rq)
Committer testing:
Again with the perf.data from the previous csets:
# perf report --stdio -s type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Data Type Data Type Offset
# ........ ......... ................
#
42.86% struct list_head struct list_head +8 (prev)
42.86% (unknown) (unknown) +0 (no field)
14.29% char char +0 (no field)
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
# perf report --stdio -s dso,type,typeoff
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4 of event 'cpu_atom/mem-loads,ldlat=30/P'
# Event count (approx.): 7
#
# Overhead Shared Object Data Type Data Type Offset
# ........ .................... ......... ................
#
42.86% [kernel.kallsyms] struct list_head struct list_head +8 (prev)
28.57% libc.so.6 (unknown) (unknown) +0 (no field)
14.29% [kernel.kallsyms] char char +0 (no field)
14.29% ld-linux-x86-64.so.2 (unknown) (unknown) +0 (no field)
#
# (Tip: If you have debuginfo enabled, try: perf report -s sym,srcline)
#
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotated_data_type__update_samples() to get histogram for data type
access.
It'll be called by perf annotate to show which fields in the data type
are accessed frequently.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add child member field if the current type is a composite type like a
struct or union. The member fields are linked in the children list and
do the same recursively if the child itself is a composite type.
Add 'self' member to the annotated_data_type to handle the members in
the same way.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's the function to find out the type info from the given sample data
and will be called from the hist_entry sort logic when 'type' sort key
is used.
It first calls objdump to disassemble the instructions and figure out
information about memory access at the location. Maybe we can do it
better by analyzing the instruction directly, but I'll leave it for
later work.
The memory access is determined by checking instruction operands to
have "(" and then extract register name and offset. It'll return NULL
if no data type is found.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotate_get_insn_location() is to get the detailed information of
instruction locations like registers and offset. It has source and
target operands locations in an array. Each operand can have a register
and an offset. The offset is meaningful when mem_ref flag is set.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evsel__get_arch() is to get architecture info from the environment.
It'll be used by other places later so let's factor it out.
Also add arch__is() to check the arch info by name.
Committer notes:
"get" is usually associated with refcounting, so we better rename this
at some point to a better name.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To aggregate accesses to the same data type, add 'data_types' tree in
DSO to maintain data types and find it by name and size.
It might have different data types that happen to have the same name,
so it also compares the size of the type.
Even if it doesn't 100% guarantee, it reduces the possibility of
mis-handling of such conflicts.
And I don't think it's common to have different types with the same
name.
Committer notes:
Very few cases on the Linux kernel, but there are some different types
with the same name, unsure if there is a debug mode in libbpf dedup that
warns about such cases, but there are provisions in pahole for that,
see:
"emit: Notice type shadowing, i.e. multiple types with the same name (enum, struct, union, etc)"
https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=4f332dbfd02072e4f410db7bdcda8d6e3422974b
$ pahole --compile > vmlinux.h
$ rm -f a ; make a
cc a.c -o a
$ grep __[0-9] vmlinux.h
union irte__1 {
struct map_info__1;
struct map_info__1 {
struct map_info__1 * next; /* 0 8 */
$
drivers/iommu/amd/amd_iommu_types.h 'union irte'
include/linux/dmar.h 'struct irte'
include/linux/device-mapper.h:
union map_info {
void *ptr;
};
include/linux/mtd/map.h:
struct map_info {
const char *name;
unsigned long size;
resource_size_t phys;
<SNIP>
kernel/events/uprobes.c:
struct map_info {
struct map_info *next;
struct mm_struct *mm;
unsigned long vaddr;
};
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The find_data_type() is to get a data type from the memory access at the
given address (IP) using a register and an offset.
It requires DWARF debug info in the DSO and searches the list of
variables and function parameters in the scope.
In a pseudo code, it does basically the following:
find_data_type(dso, ip, reg, offset)
{
pc = map__rip_2objdump(ip);
CU = dwarf_addrdie(dso->dwarf, pc);
scopes = die_get_scopes(CU, pc);
for_each_scope(S, scopes) {
V = die_find_variable_by_reg(S, pc, reg);
if (V && V.type == pointer_type) {
T = die_get_real_type(V);
if (offset < T.size)
return T;
}
}
return NULL;
}
Committer notes:
The 'size' variable in check_variable() is 64-bit, so use PRIu64 and
inttypes.h to debug it.
Ditto at find_data_type_die().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The get_dwarf_regnum() returns a DWARF register number from a register
name string according to the psABI. Also add two pseudo encodings of
DWARF_REG_PC which is a register that are used by PC-relative addressing
and DWARF_REG_FB which is a frame base register. They need to be
handled in a special way.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The die_get_typename_from_type() is to get the name of the given DIE in
C-style type name.
The difference from die_get_typename() is that it does not retrieve the
DW_AT_type and use the given DIE directly. This will be used when users
know the type DIE already.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A new Counter tool is introduced to provide a generic and flexible way
to watch Counter device events from userspace.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZYWSpAAKCRC1SFbKvhIj
Kw8RAQDKJqndjeOWRHQUGaUVyEO0q/15tipKSI4GiDgtY8ITewEAqmvlbfw6Nm1y
WZALVgUGHcFbsqci+QGkPoNSwGIEyAo=
=3PrP
-----END PGP SIGNATURE-----
Merge tag 'counter-updates-for-6.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
First set of Counter updates for the 6.8 cycle
A new Counter tool is introduced to provide a generic and flexible way
to watch Counter device events from userspace.
* tag 'counter-updates-for-6.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
tools/counter: Remove unneeded semicolon
tools/counter: Fix spelling mistake "componend" -> "component"
MAINTAINERS: add myself as counter watch events tool maintainer
tools/counter: add a flexible watch events tool
- Fix a race condition in updating external interrupt for
trap-n-emulated IMSIC swfile
- Fix print_reg defaults in get-reg-list selftest
ARM:
- Ensure a vCPU's redistributor is unregistered from the MMIO bus
if vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
x86:
- Fix breakage for SEV-ES guests that use XSAVES.
Selftests:
- Fix bad use of strcat(), by not using strcat() at all
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWGFv0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPczAf/e6AgAnyPG1UItZqpLD+JDURcVaV1
QyP3kc240e9dEjEkGidQ8vyekgAU9nGt2rFNPaU+5Y1E5Ky+SpZbbIzgS1cZypxT
J1lsrVhZgNdCKEVRdrUMIzhkUEk0Kjd7OsFMQ9F6OuITSv/HCgZ1g6KobgBzUGCR
0vcYqM74VnZiGGd5A4w8qP2F0FmF/7tf9k6iKWoYu6UpFe9z50jpIRq6dynrOHOc
fmwsptmGzjgzuLK9sZTXYETOQvcpmXLqSZ65k1LQG224J5AYjS08Y5XLo1QS4rpV
/g8QAgi+9ChGSzC47fqr/solAsoz/NzALPqydy+FH4u+O/O4SG5I4V8OmA==
=4/NU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix a race condition in updating external interrupt for
trap-n-emulated IMSIC swfile
- Fix print_reg defaults in get-reg-list selftest
ARM:
- Ensure a vCPU's redistributor is unregistered from the MMIO bus if
vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
x86:
- Fix breakage for SEV-ES guests that use XSAVES
Selftests:
- Fix bad use of strcat(), by not using strcat() at all"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV: Do not intercept accesses to MSR_IA32_XSS for SEV-ES guests
KVM: selftests: Fix dynamic generation of configuration names
RISCV: KVM: update external interrupt atomically for IMSIC swfile
KVM: riscv: selftests: Fix get-reg-list print_reg defaults
KVM: selftests: Ensure sysreg-defs.h is generated at the expected path
KVM: Convert comment into an assertion in kvm_io_bus_register_dev()
KVM: arm64: vgic: Ensure that slots_lock is held in vgic_register_all_redist_iodevs()
KVM: arm64: vgic: Force vcpu vgic teardown on vcpu destroy
KVM: arm64: vgic: Add a non-locking primitive for kvm_vgic_vcpu_destroy()
KVM: arm64: vgic: Simplify kvm_vgic_destroy()
Some devices do not support individual 'pmac' and 'emac' stats.
For such devices, resort to 'aggregate' stats.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some devices have errata due to which they cannot report ETH_ZLEN (60)
in the rx-min-frag-size. This was foreseen of course, and lldpad has
logic that when we request it to advertise addFragSize 0, it will round
it up to the lowest value that is _actually_ supported by the hardware.
The problem is that the selftest expects lldpad to report back to us the
same value as we requested.
Make the selftest smarter by figuring out on its own what is a
reasonable value to expect.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a variable RUN_IN_NETNS if the user wants to run all the selected tests
in namespace in parallel. With this, we can save a lot of testing time.
Note that some tests may not fit to run in namespace, e.g.
net/drop_monitor_tests.sh, as the dwdump needs to be run in init ns.
I also added another parameter -p to make all the logs reported separately
instead of mixing them in the stdout or output.log.
Nit: the NUM in run_one is not used, rename it to test_num.
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh
Here is the test result after conversion.
# ./pmtu.sh
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
TEST: ipv6: PMTU exceptions [ OK ]
TEST: ipv6: PMTU exceptions - nexthop objects [ OK ]
...
TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv6: list and flush cached exceptions [ OK ]
TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv4: PMTU exception w/route replace [ OK ]
TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ]
TEST: ipv6: PMTU exception w/route replace [ OK ]
TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The setup_loopback and setup_veth use their own way to create namespace.
So let's just re-define server_ns/client_ns to unique name.
At the same time update the namespace name in gro.sh and toeplitz.sh.
As I don't have env to run toeplitz.sh. Here is only the gro test result.
# ./gro.sh
running test ipv4 data
Expected {200 }, Total 1 packets
Received {200 }, Total 1 packets.
...
Gro::large test passed.
All Tests Succeeded!
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
# ./xfrm_policy.sh
PASS: policy before exception matches
PASS: ping to .254 bypassed ipsec tunnel (exceptions)
PASS: direct policy matches (exceptions)
PASS: policy matches (exceptions)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies)
PASS: direct policy matches (exceptions and block policies)
PASS: policy matches (exceptions and block policies)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hresh changes)
PASS: direct policy matches (exceptions and block policies after hresh changes)
PASS: policy matches (exceptions and block policies after hresh changes)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hthresh change in ns3)
PASS: direct policy matches (exceptions and block policies after hthresh change in ns3)
PASS: policy matches (exceptions and block policies after hthresh change in ns3)
PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after htresh change to normal)
PASS: direct policy matches (exceptions and block policies after htresh change to normal)
PASS: policy matches (exceptions and block policies after htresh change to normal)
PASS: policies with repeated htresh change
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
# ./stress_reuseport_listen.sh
listen 24000 socks took 0.47714
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running the test in namespace, the debugfs may not load automatically.
So add a checking to make sure debugfs loaded. Here is the test result
after conversion.
# ./rtnetlink.sh
PASS: policy routing
PASS: route get
...
PASS: address proto IPv4
PASS: address proto IPv6
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>