Add a new test case to the vpmu_counter_access test to check
if PMU registers or their bits for unimplemented counters are not
accessible or are RAZ, as expected.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-12-rananta@google.com
[Oliver: fix issues relating to exception return address]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a new test case to the vpmu_counter_access test to check if PMU
registers or their bits for implemented counters on the vCPU are
readable/writable as expected, and can be programmed to count events.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-11-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Introduce vpmu_counter_access test for arm64 platforms.
The test configures PMUv3 for a vCPU, sets PMCR_EL0.N for the vCPU,
and check if the guest can consistently see the same number of the
PMU event counters (PMCR_EL0.N) that userspace sets.
This test case is done with each of the PMCR_EL0.N values from
0 to 31 (With the PMCR_EL0.N values greater than the host value,
the test expects KVM_SET_ONE_REG for the PMCR_EL0 to fail).
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-10-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Import kernel's include/linux/perf/arm_pmuv3.h, with the
definition of PMEVN_SWITCH() additionally including an assert()
for the 'default' case. The following patches will use macros
defined in this header.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-9-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Change ifconfig with ip command, on a system where ifconfig is
not used this script will not work correcly.
Test result with this patchset:
sudo make TARGETS="net" kselftest
....
TAP version 13
1..1
timeout set to 1500
selftests: net: route_localnet.sh
run arp_announce test
net.ipv4.conf.veth0.route_localnet = 1
net.ipv4.conf.veth1.route_localnet = 1
net.ipv4.conf.veth0.arp_announce = 2
net.ipv4.conf.veth1.arp_announce = 2
PING 127.25.3.14 (127.25.3.14) from 127.25.3.4 veth0: 56(84)
bytes of data.
64 bytes from 127.25.3.14: icmp_seq=1 ttl=64 time=0.038 ms
64 bytes from 127.25.3.14: icmp_seq=2 ttl=64 time=0.068 ms
64 bytes from 127.25.3.14: icmp_seq=3 ttl=64 time=0.068 ms
64 bytes from 127.25.3.14: icmp_seq=4 ttl=64 time=0.068 ms
64 bytes from 127.25.3.14: icmp_seq=5 ttl=64 time=0.068 ms
--- 127.25.3.14 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4073ms
rtt min/avg/max/mdev = 0.038/0.062/0.068/0.012 ms
ok
run arp_ignore test
net.ipv4.conf.veth0.route_localnet = 1
net.ipv4.conf.veth1.route_localnet = 1
net.ipv4.conf.veth0.arp_ignore = 3
net.ipv4.conf.veth1.arp_ignore = 3
PING 127.25.3.14 (127.25.3.14) from 127.25.3.4 veth0: 56(84)
bytes of data.
64 bytes from 127.25.3.14: icmp_seq=1 ttl=64 time=0.032 ms
64 bytes from 127.25.3.14: icmp_seq=2 ttl=64 time=0.065 ms
64 bytes from 127.25.3.14: icmp_seq=3 ttl=64 time=0.066 ms
64 bytes from 127.25.3.14: icmp_seq=4 ttl=64 time=0.065 ms
64 bytes from 127.25.3.14: icmp_seq=5 ttl=64 time=0.065 ms
--- 127.25.3.14 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4092ms
rtt min/avg/max/mdev = 0.032/0.058/0.066/0.013 ms
ok
ok 1 selftests: net: route_localnet.sh
...
Signed-off-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231023123422.2895-1-swarupkotikalapudi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
or aren't considered necessary for earlier kernel versions.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZTfz/QAKCRDdBJ7gKXxA
joMyAP99hLaLYeJbjlf+4tLJzhlpbVoFra1ieun2D+ZgFE78xQD/T4T3PYrZhYqD
WdrxGT9fiKOykXM5pmQRH9Zr4EvJBA0=
=Obbk
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 12 are cc:stable and the remainder address post-6.5
issues or aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()
selftests/mm: include mman header to access MREMAP_DONTUNMAP identifier
mailmap: correct email aliasing for Oleksij Rempel
mailmap: map Bartosz's old address to the current one
mm/damon/sysfs: check DAMOS regions update progress from before_terminate()
MAINTAINERS: Ondrej has moved
kasan: disable kasan_non_canonical_hook() for HW tags
kasan: print the original fault addr when access invalid shadow
hugetlbfs: close race between MADV_DONTNEED and page fault
hugetlbfs: extend hugetlb_vma_lock to private VMAs
hugetlbfs: clear resv_map pointer if mmap fails
mm: zswap: fix pool refcount bug around shrink_worker()
mm/migrate: fix do_pages_move for compat pointers
riscv: fix set_huge_pte_at() for NAPOT mappings when a swap entry is set
riscv: handle VM_FAULT_[HWPOISON|HWPOISON_LARGE] faults instead of panicking
mmap: fix error paths with dup_anon_vma()
mmap: fix vma_iterator in error path of vma_merge()
mm: fix vm_brk_flags() to not bail out while holding lock
mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer
mm/page_alloc: correct start page when guard page debug is enabled
Change test_mock_dirty_bitmaps() to pass a flag where it specifies the flag
under test. The test does the same thing as the GET_DIRTY_BITMAP regular
test. Except that it tests whether the dirtied bits are fetched all the
same a second time, as opposed to observing them cleared.
Link: https://lore.kernel.org/r/20231024135109.73787-19-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Enumerate the capabilities from the mock device and test whether it
advertises as expected. Include it as part of the iommufd_dirty_tracking
fixture.
Link: https://lore.kernel.org/r/20231024135109.73787-18-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new test ioctl for simulating the dirty IOVAs in the mock domain, and
implement the mock iommu domain ops that get the dirty tracking supported.
The selftest exercises the usual main workflow of:
1) Setting dirty tracking from the iommu domain
2) Read and clear dirty IOPTEs
Different fixtures will test different IOVA range sizes, that exercise
corner cases of the bitmaps.
Link: https://lore.kernel.org/r/20231024135109.73787-17-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change mock_domain to supporting dirty tracking and add tests to exercise
the new SET_DIRTY_TRACKING API in the iommufd_dirty_tracking selftest
fixture.
Link: https://lore.kernel.org/r/20231024135109.73787-16-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to selftest the iommu domain dirty enforcing implement the
mock_domain necessary support and add a new dev_flags to test that the
hwpt_alloc/attach_device fails as expected.
Expand the existing mock_domain fixture with a enforce_dirty test that
exercises the hwpt_alloc and device attachment.
Link: https://lore.kernel.org/r/20231024135109.73787-15-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Expand mock_domain test to be able to manipulate the device capabilities.
This allows testing with mockdev without dirty tracking support advertised
and thus make sure enforce_dirty test does the expected.
To avoid breaking IOMMUFD_TEST UABI replicate the mock_domain struct and
thus add an input dev_flags at the end.
Link: https://lore.kernel.org/r/20231024135109.73787-14-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A convoluted test case for iterators convergence logic that
demonstrates that states with branch count equal to 0 might still be
a part of not completely explored loop.
E.g. consider the following state diagram:
initial Here state 'succ' was processed first,
| it was eventually tracked to produce a
V state identical to 'hdr'.
.---------> hdr All branches from 'succ' had been explored
| | and thus 'succ' has its .branches == 0.
| V
| .------... Suppose states 'cur' and 'succ' correspond
| | | to the same instruction + callsites.
| V V In such case it is necessary to check
| ... ... whether 'succ' and 'cur' are identical.
| | | If 'succ' and 'cur' are a part of the same loop
| V V they have to be compared exactly.
| succ <- cur
| |
| V
| ...
| |
'----'
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
These test cases try to hide read and precision marks from loop
convergence logic: marks would only be assigned on subsequent loop
iterations or after exploring states pushed to env->head stack first.
Without verifier fix to use exact states comparison logic for
iterators convergence these tests (except 'triple_continue') would be
errorneously marked as safe.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convergence for open coded iterators is computed in is_state_visited()
by examining states with branches count > 1 and using states_equal().
states_equal() computes sub-state relation using read and precision marks.
Read and precision marks are propagated from children states,
thus are not guaranteed to be complete inside a loop when branches
count > 1. This could be demonstrated using the following unsafe program:
1. r7 = -16
2. r6 = bpf_get_prandom_u32()
3. while (bpf_iter_num_next(&fp[-8])) {
4. if (r6 != 42) {
5. r7 = -32
6. r6 = bpf_get_prandom_u32()
7. continue
8. }
9. r0 = r10
10. r0 += r7
11. r8 = *(u64 *)(r0 + 0)
12. r6 = bpf_get_prandom_u32()
13. }
Here verifier would first visit path 1-3, create a checkpoint at 3
with r7=-16, continue to 4-7,3 with r7=-32.
Because instructions at 9-12 had not been visitied yet existing
checkpoint at 3 does not have read or precision mark for r7.
Thus states_equal() would return true and verifier would discard
current state, thus unsafe memory access at 11 would not be caught.
This commit fixes this loophole by introducing exact state comparisons
for iterator convergence logic:
- registers are compared using regs_exact() regardless of read or
precision marks;
- stack slots have to have identical type.
Unfortunately, this is too strict even for simple programs like below:
i = 0;
while(iter_next(&it))
i++;
At each iteration step i++ would produce a new distinct state and
eventually instruction processing limit would be reached.
To avoid such behavior speculatively forget (widen) range for
imprecise scalar registers, if those registers were not precise at the
end of the previous iteration and do not match exactly.
This a conservative heuristic that allows to verify wide range of
programs, however it precludes verification of programs that conjure
an imprecise value on the first loop iteration and use it as precise
on the second.
Test case iter_task_vma_for_each() presents one of such cases:
unsigned int seen = 0;
...
bpf_for_each(task_vma, vma, task, 0) {
if (seen >= 1000)
break;
...
seen++;
}
Here clang generates the following code:
<LBB0_4>:
24: r8 = r6 ; stash current value of
... body ... 'seen'
29: r1 = r10
30: r1 += -0x8
31: call bpf_iter_task_vma_next
32: r6 += 0x1 ; seen++;
33: if r0 == 0x0 goto +0x2 <LBB0_6> ; exit on next() == NULL
34: r7 += 0x10
35: if r8 < 0x3e7 goto -0xc <LBB0_4> ; loop on seen < 1000
<LBB0_6>:
... exit ...
Note that counter in r6 is copied to r8 and then incremented,
conditional jump is done using r8. Because of this precision mark for
r6 lags one state behind of precision mark on r8 and widening logic
kicks in.
Adding barrier_var(seen) after conditional is sufficient to force
clang use the same register for both counting and conditional jump.
This issue was discussed in the thread [1] which was started by
Andrew Werner <awerner32@gmail.com> demonstrating a similar bug
in callback functions handling. The callbacks would be addressed
in a followup patch.
[1] https://lore.kernel.org/bpf/97a90da09404c65c8e810cf83c94ac703705dc0e.camel@gmail.com/
Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This pull request contains the following fixes:
o tools/nolibc: i386: Fix a stack misalign bug on _start
o MAINTAINERS: nolibc: update tree location
o tools/nolibc: mark start_c as weak to avoid linker errors
-----BEGIN PGP SIGNATURE-----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=PDcP
-----END PGP SIGNATURE-----
Merge tag 'urgent/nolibc.2023.10.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc fixes from Paul McKenney:
- tools/nolibc: i386: Fix a stack misalign bug on _start
- MAINTAINERS: nolibc: update tree location
- tools/nolibc: mark start_c as weak to avoid linker errors
* tag 'urgent/nolibc.2023.10.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc: mark start_c as weak
MAINTAINERS: nolibc: update tree location
tools/nolibc: i386: Fix a stack misalign bug on _start
Jiri Pirko says:
====================
devlink: finish conversion to generated split_ops
This patchset converts the remaining genetlink commands to generated
split_ops and removes the existing small_ops arrays entirely
alongside with shared netlink attribute policy.
Patches #1-#6 are just small preparations and small fixes on multiple
places. Note that couple of patches contain the "Fixes"
tag but no need to put them into -net tree.
Patch #7 is a simple rename preparation
Patch #8 is the main one in this set and adds actual definitions of cmds
in to yaml file.
Patches #9-#10 finalize the change removing bits that are no longer in
use.
====================
Link: https://lore.kernel.org/r/20231021112711.660606-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, some of the commands are not described in devlink yaml file
and are manually filled in net/devlink/netlink.c in small_ops. To make
all part of split_ops, add definitions of the rest of the commands
alongside with needed attributes and enums.
Note that this focuses on the kernel side. The requests are fully
described in order to generate split_op alongside with policies.
Follow-up will describe the replies in order to make the userspace
helpers complete.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink-get command does not contain reload-action attr in reply.
Remove it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-5-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to the check in RenderInfo class constructor, type_consistent
flag is set to False to avoid rendering the same response parsing
helper for do and dump ops. However, in case there is no do, the helper
needs to be rendered for dump op. So split check to achieve that.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce support for attribute type bitfield32.
Note that since the generated code works with struct nla_bitfield32,
the generator adds netlink.h to the list of includes for userspace
headers in case any bitfield32 is present.
Note that this is added only to genetlink-legacy scheme as requested
by Jakub Kicinski.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231021112711.660606-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
a collection of small fixes that look like worth having in
this release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmUv/JMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpO/kH/j/uunE6oOE/BhtfO1USciebjRhLJ7lvoAvS
OD4/bcA45GRGLGIZaJtkcCIOOb9djUWLsS3QqA2UUFX+NN2/teEX6lsnv1tJTjdC
a2DkDS6AVYwp+rpzxSE5PUn/ImpiDt0/+R0ZbN56R3rHTOl7nFeXvutMbzxNXZvL
eWLcSDmRg7nmAdF+YbZ5omdgSL11Wi+dBFEJ0unEsecyu8pO7WcAGYvU6x/x04XJ
uLrjsaAGKr3rtoLLZ1DtnSmoED/b/lwDwzVR5REsg4kf2aiHxj1+kKGNXfrtqMl5
2OVxZEorcLufHM212LW4KT3Ncw4KE4xJzjt2mzEwO/ztgtomnBM=
=Rhxy
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A collection of small fixes that look like worth having in this
release"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci: fix the common cfg map size
virtio-crypto: handle config changed by work queue
vhost: Allow null msg.size on VHOST_IOTLB_INVALIDATE
vdpa/mlx5: Fix firmware error on creation of 1k VQs
virtio_balloon: Fix endless deflation and inflation on arm64
vdpa/mlx5: Fix double release of debugfs entry
virtio-mmio: fix memory leak of vm_dev
vdpa_sim_blk: Fix the potential leak of mgmt_dev
tools/virtio: Add dma sync api for virtio test
checkpatch gets confused and treats __attribute__ as a function call.
It complains about white space before "(":
WARNING:SPACING: space prohibited between function name and open parenthesis '('
+ struct netdev_queue_get_rsp obj __attribute__ ((aligned (8)));
No spaces wins in the kernel:
$ git grep 'attribute__((.*aligned(' | wc -l
480
$ git grep 'attribute__ ((.*aligned (' | wc -l
110
$ git grep 'attribute__ ((.*aligned(' | wc -l
94
$ git grep 'attribute__((.*aligned (' | wc -l
63
So, whatever, change the codegen.
Note that checkpatch also thinks we should use __aligned(),
but this is user space code.
Link: https://lore.kernel.org/all/202310190900.9Dzgkbev-lkp@intel.com/
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231020221827.3436697-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It delivers current TCP time stamp in ms unit, and is used
in place of confusing tcp_time_stamp_raw()
It is the same family than tcp_clock_ns() and tcp_clock_ms().
tcp_time_stamp_raw() will be replaced later for TSval
contexts with a more descriptive name.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- kprobe-events: Fix kprobe events to reject if the attached symbol
is not unique name because it may not the function which the user
want to attach to. (User can attach a probe to such symbol using
the nearest unique symbol + offset.)
- selftest: Add a testcase to ensure the kprobe event rejects non
unique symbol correctly.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmUzdQobHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bMNAH/inFWv8e+rMm8F5Po6ZI
CmBxuZbxy2l+KfYDjXqSHu7TLKngVd6Bhdb5H2K7fgdwiZxrS0i6qvdppo+Cxgop
Yod06peDTM80IKavioCcOJOwLPGXXpZkMlK5fdC48HN6vrf9km4vws5ZAagfc1ng
YhnYm1HHeXcIYwtLkE2dCr6HkwkaOebWTLdZ8c70d1OPw0L9rzxH+edjhKCq8uIw
6WUg9ERxJYPUuCkQxOxVJrTdzNMRXsgf28FHc0LyYRm8kDpECT2BP6e/Y+TBbsX5
2pN5cUY5qfI6t3Pc1HDs2KX8ui2QCmj0mCvT0VixhdjThdHpRf0VjIFFAANf3LNO
XVA=
=O1Aa
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.6-rc6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- kprobe-events: Fix kprobe events to reject if the attached symbol is
not unique name because it may not the function which the user want
to attach to. (User can attach a probe to such symbol using the
nearest unique symbol + offset.)
- selftest: Add a testcase to ensure the kprobe event rejects non
unique symbol correctly.
* tag 'probes-fixes-v6.6-rc6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/ftrace: Add new test case which checks non unique symbol
tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols
Add a test to check if inner rt curves are upgraded to sc curves.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix regression in reading scale and unit files from sysfs for PMU
events, so that we can use that info to pretty print instead of
printing raw numbers:
# perf stat -e power/energy-ram/,power/energy-gpu/ sleep 2
Performance counter stats for 'system wide':
1.64 Joules power/energy-ram/
0.20 Joules power/energy-gpu/
2.001228914 seconds time elapsed
#
# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
#
- The small llvm.cpp file used to check if the llvm devel files are present was
incorrectly deleted when removing the BPF event in 'perf trace', put it back
as it is also used by tools/bpf/bpftool, that uses llvm routines to do
disassembly of BPF object files.
- Fix use of addr_location__exit() in dlfilter__object_code(), making sure that
it is only used to pair a previous addr_location__init() call.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZTKh5AAKCRCyPKLppCJ+
J/g/AP0f6SNyHJz21JzDTzyjXAeSdMzKwic0LXv+kATQy31HJAD+Kf7UKQieUeZB
fxvp60aKyFN8IVIgpYiAjZMS3k9XPAY=
=N7Gv
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix regression in reading scale and unit files from sysfs for PMU
events, so that we can use that info to pretty print instead of
printing raw numbers:
# perf stat -e power/energy-ram/,power/energy-gpu/ sleep 2
Performance counter stats for 'system wide':
1.64 Joules power/energy-ram/
0.20 Joules power/energy-gpu/
2.001228914 seconds time elapsed
#
# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
#
- The small llvm.cpp file used to check if the llvm devel files are
present was incorrectly deleted when removing the BPF event in 'perf
trace', put it back as it is also used by tools/bpf/bpftool, that
uses llvm routines to do disassembly of BPF object files.
- Fix use of addr_location__exit() in dlfilter__object_code(), making
sure that it is only used to pair a previous addr_location__init()
call.
* tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools build: Fix llvm feature detection, still used by bpftool
perf dlfilter: Add a test for object_code()
perf dlfilter: Fix use of addr_location__exit() in dlfilter__object_code()
perf pmu: Fix perf stat output with correct scale and unit
This Kselftest update for Linux 6.6-rc7 consists of one single fix
to assert check in user_events abi_test to properly check bit value
on Big Endian architectures. The current code treats the bit values
as Little Endian and the check fails on Big Endian.
-----BEGIN PGP SIGNATURE-----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=PJhV
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"One single fix to assert check in user_events abi_test to properly
check bit value on Big Endian architectures. The code treated the bit
values as Little Endian and the check failed on Big Endian"
* tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/user_events: Fix abi_test for BE archs
Add the following 3 test cases for bpf memory allocator:
1) Do allocation in bpf program and free through map free
2) Do batch per-cpu allocation and per-cpu free in bpf program
3) Do per-cpu allocation in bpf program and free through map free
For per-cpu allocation, because per-cpu allocation can not refill timely
sometimes, so test 2) and test 3) consider it is OK for
bpf_percpu_obj_new_impl() to return NULL.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-8-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The linked list failure test 'pop_front_off' and 'pop_back_off'
currently rely on matching exact instruction and register values. The
purpose of the test is to ensure the offset is correctly incremented for
the returned pointers from list pop helpers, which can then be used with
container_of to obtain the real object. Hence, somehow obtaining the
information that the offset is 48 will work for us. Make the test more
robust by relying on verifier error string of bpf_spin_lock and remove
dependence on fragile instruction index or register number, which can be
affected by different clang versions used to build the selftests.
Fixes: 300f19dcdb ("selftests/bpf: Add BPF linked list API tests")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231020144839.2734006-1-memxor@gmail.com
If name_show() is non unique, this test will try to install a kprobe on this
function which should fail returning EADDRNOTAVAIL.
On kernel where name_show() is not unique, this test is skipped.
Link: https://lore.kernel.org/all/20231020104250.9537-3-flaniel@linux.microsoft.com/
Cc: stable@vger.kernel.org
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
We have a new SBI debug console (DBCN) extension supported by in-kernel
KVM so let us add this extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
With CONFIG_RETHUNK enabled, the compiler replaces every RET with a tail
call to a return thunk ('JMP __x86_return_thunk'). Objtool annotates
all such return sites so they can be patched during boot by
apply_returns().
The implementation of __x86_return_thunk() is just a bare RET. It's
only meant to be used temporarily until apply_returns() patches all
return sites with either a JMP to another return thunk or an actual RET.
Removing the .text..__x86.return_thunk section would break objtool's
detection of return sites in retpolines. Since retpolines and return
thunks would land in the same section, the compiler no longer uses
relocations for the intra-section jumps between the retpolines and the
return thunk, causing objtool to overlook them.
As a result, none of the retpolines' return sites would get patched.
Each one stays at 'JMP __x86_return_thunk', effectively a bare RET.
Fix it by teaching objtool to detect when a non-relocated jump target is
a return thunk (or retpoline).
[ bp: Massage the commit message now that the offending commit
removing the .text..__x86.return_thunk section has been zapped.
Still keep the objtool change here as it makes objtool more robust
wrt handling such intra-TU jumps without relocations, should some
toolchain and/or config generate them in the future. ]
Reported-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231012024737.eg5phclogp67ik6x@treble
Support uint / sint types in specs and YNL.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
uint/sint support will add more logic to mnl_type(),
deduplicate it and make it more accessible.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If using parallel threads to collect data, perf record needs at least 6 fds
per CPU. (one for sys_perf_event_open, four for pipe msg and ack of the
pipe, see record__thread_data_open_pipes(), and one for open perf.data.XXX)
For an environment with more than 100 cores, if perf record uses both
`-a` and `--threads` options, it is easy to exceed the upper limit of the
file descriptor number, when we run out of them try to increase the limits.
Before:
$ ulimit -n
1024
$ lscpu | grep 'On-line CPU(s)'
On-line CPU(s) list: 0-159
$ perf record --threads -a sleep 1
Failed to create data directory: Too many open files
After:
$ ulimit -n
1024
$ lscpu | grep 'On-line CPU(s)'
On-line CPU(s) list: 0-159
$ perf record --threads -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.394 MB perf.data (1576 samples) ]
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231013075945.698874-1-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The CPI_STALL_RATIO metric group can be used to present the high
level CPI stall breakdown metrics in powerpc, which will show:
- DISPATCH_STALL_CPI ( Dispatch stall cycles per insn )
- ISSUE_STALL_CPI ( Issue stall cycles per insn )
- EXECUTION_STALL_CPI ( Execution stall cycles per insn )
- COMPLETION_STALL_CPI ( Completion stall cycles per insn )
Commit cf26e043c2 ("perf vendor events power10: Add JSON
metric events to present CPI stall cycles in powerpc)" which added
the CPI_STALL_RATIO metric group, also modified
the PMC value used in PM_RUN_INST_CMPL event from PMC4 to PMC5,
to avoid multiplexing of events.
But that got revert in recent changes. Fix this issue by changing
back the PMC value used in PM_RUN_INST_CMPL to PMC5.
Result with the fix:
./perf stat --metric-no-group -M CPI_STALL_RATIO <workload>
Performance counter stats for 'workload':
68,745,426 PM_CMPL_STALL # 0.21 COMPLETION_STALL_CPI
7,692,827 PM_ISSUE_STALL # 0.02 ISSUE_STALL_CPI
322,638,223 PM_RUN_INST_CMPL # 0.05 DISPATCH_STALL_CPI
# 0.48 EXECUTION_STALL_CPI
16,858,553 PM_DISP_STALL_CYC
153,880,133 PM_EXEC_STALL
0.089774592 seconds time elapsed
"--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled
in all group for more accuracy.
Fixes: 7d473f475b ("perf vendor events: Move JSON/events to appropriate files for power10 platform")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Cc: maddy@linux.ibm.com
Link: https://lore.kernel.org/r/20231016143110.244255-1-kjain@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Particularly great to see a resolver driver move out of staging via a
massive set of changes. Only took 13 years :)
One small patch added then reverted due to a report of test breakage
(ashai-kasei,ak8975: Drop deprecated enums.)
An immutable branch was used for some hid-senors changes in case
there was a need to take them into the HID tree as well.
New device support
-----------------
adi,hmc425a
- Add support for HMC540SLP3E broadband 4-bit digital attenuator.
kionix,kx022a
- Add support for the kx132-1211 accelerometer. Require significant
driver rework to enable this including add a chip type specific
structure to deal with the chip differences.
- Add support for the kx132acr-lbz accelerometer (subset of the kx022a
feature set).
lltc,ltc2309
- New driver for this 8 channel ADC.
microchip,mcp3911
- Add support for rest of mcp391x family of ADCs (there are various
differences beyond simple channel count variation.
Series includes some general driver cleanup.
microchip,mcp3564
- New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564
and their R variants of 16/24bit ADCs. A few minor fixed followed.
rohm,bu1390
- New driver for this pressure sensor.
Staging graduation
------------------
adi,ad1210 (after 13 or so years :)
- More or less a complete (step-wise) rewrite of this resolver driver
to bring it up to date with modern IIO standards. The fault signal
handling mapping to event channels was particularly complex and
significant part of the changes.
Features
--------
iio-core
- Add chromacity and color temperature channel types.
adi,ad7192
- Oversampling ratio control (called fast settling in datasheet).
adi,adis16475
- Add core support and then driver support for delta angle and delta
velocity channels. These are intended for summation to establish
angle and velocity changes over larger timescales. Fix was
needed for alignment after the temperature channel. Further fix
reduced set of devices for which the buffer support was applicable
as seems burst reads don't cover these on all devices.
hid-sensors-als
- Chromacity and color temperatures support including in amd sfh.
stx104
- Add support for counter subsystem to this multipurpose device.
ti,twl6030
- Add missing device tree binding description.
Clean up and minor fixes.
------------------------
treewide
- Drop some unused declarations across IIO.
- Make more use of device_get_match_data() instead of OF specific
approaches.
Similar cleanup to sets of drivers.
- Stop platform remove callbacks returning anything by using the
temporary remove_new() callback.
- Use i2c_get_match_data() to cope nicely with all types of ID table
entry.
- Use device_get_match_data() for various platform device to cope
with more types of firmware.
- Convert from enum to pointer in ID tables allowing use of
i2c_get_match_data().
- Fix sorting on some ID tables.
- Include specific string helper headers rather than simply string_helpers.h
docs
- Better description of the ordering requirements etc for
available_scan_masks.
tools
- Handle alignment of mixed sizes where the last element isn't the biggest
correctly. Seems that doesn't happen often!
adi,ad2s1210
- Lots of work from David Lechner on this driver including a few fixes
that are going with the rework to avoid slowing that down.
adi,ad4310
- Replace deprecated devm_clk_register()
adi,ad74413r
- Bring the channel function setting inline with the datasheet.
adi,ad7192
- Change to FIELD_PREP(), FIELD_GET().
- Calculate f_order from the sinc filter and chop filter states.
- Move more per chip config into data in struct ad7192_chip_info
- Cleanup unused parameter in channel macros.
adi,adf4350
- Make use of devm_* to simplify error handling for many of the setup
calls in probe() / tear down in remove() and error paths. Some more
work to be done on this one.
- Use dev_err_probe() for errors in probe() callback.
adi,adf4413
- Typo in function name prefix.
adi,adxl345
- Add channel scale to the chip type specific structure and drop
using a type field previously used for indirection.
asahi,ak8985
- Fix a mismatch introduced when switching from enum->pointers
in the match tables.
amlogic,meson
- Expand error logging during probe.
invensense,mpu6050
- Support level-shifter control. Whilst no one is sure exactly what this
is doing it is needed for some old boards.
- Document mount-matrix dt-binding.
mediatek,mt6577
- Use devm_clk_get_enabled() to replace open coded version and move
everything over to being device managed. Drop now empty remove()
callback. Fix follows to put the drvdata back.
- Use dev_err_probe() for error reporting in probe() callback.
memsic,mxc4005
- Add of_match_table.
microchip,mcp4725
- Move various chip specific data from being looked up by chip ID to
data in the chip type specific structure.
silicon-labs,si7005
- Add of_match_table and entry in trivial-devices.yaml
st,lsm6dsx
- Add missing mount-matrix dt binding documentation.
st,spear
- Use devm_clk_get_enabled() and some other devm calls to move everything
over to being device managed. Drop now empty remove() callback.
- Use dev_err_probe() to better handled deferred probing and tidy up
error reporting in probe() callback.
st,stm32-adc
- Add a bit of additional checking in probe() to protect against a NULL
pointer (no known path to trigger it today).
- Replace deprecated strncpy()
ti,ads1015
- Allow for edge triggers.
- Document interrupt in dt-bindings.
-----BEGIN PGP SIGNATURE-----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=wth0
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.7
Particularly great to see a resolver driver move out of staging via a
massive set of changes. Only took 13 years :)
One small patch added then reverted due to a report of test breakage
(ashai-kasei,ak8975: Drop deprecated enums.)
An immutable branch was used for some hid-senors changes in case
there was a need to take them into the HID tree as well.
New device support
-----------------
adi,hmc425a
- Add support for HMC540SLP3E broadband 4-bit digital attenuator.
kionix,kx022a
- Add support for the kx132-1211 accelerometer. Require significant
driver rework to enable this including add a chip type specific
structure to deal with the chip differences.
- Add support for the kx132acr-lbz accelerometer (subset of the kx022a
feature set).
lltc,ltc2309
- New driver for this 8 channel ADC.
microchip,mcp3911
- Add support for rest of mcp391x family of ADCs (there are various
differences beyond simple channel count variation.
Series includes some general driver cleanup.
microchip,mcp3564
- New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564
and their R variants of 16/24bit ADCs. A few minor fixed followed.
rohm,bu1390
- New driver for this pressure sensor.
Staging graduation
------------------
adi,ad1210 (after 13 or so years :)
- More or less a complete (step-wise) rewrite of this resolver driver
to bring it up to date with modern IIO standards. The fault signal
handling mapping to event channels was particularly complex and
significant part of the changes.
Features
--------
iio-core
- Add chromacity and color temperature channel types.
adi,ad7192
- Oversampling ratio control (called fast settling in datasheet).
adi,adis16475
- Add core support and then driver support for delta angle and delta
velocity channels. These are intended for summation to establish
angle and velocity changes over larger timescales. Fix was
needed for alignment after the temperature channel. Further fix
reduced set of devices for which the buffer support was applicable
as seems burst reads don't cover these on all devices.
hid-sensors-als
- Chromacity and color temperatures support including in amd sfh.
stx104
- Add support for counter subsystem to this multipurpose device.
ti,twl6030
- Add missing device tree binding description.
Clean up and minor fixes.
------------------------
treewide
- Drop some unused declarations across IIO.
- Make more use of device_get_match_data() instead of OF specific
approaches.
Similar cleanup to sets of drivers.
- Stop platform remove callbacks returning anything by using the
temporary remove_new() callback.
- Use i2c_get_match_data() to cope nicely with all types of ID table
entry.
- Use device_get_match_data() for various platform device to cope
with more types of firmware.
- Convert from enum to pointer in ID tables allowing use of
i2c_get_match_data().
- Fix sorting on some ID tables.
- Include specific string helper headers rather than simply string_helpers.h
docs
- Better description of the ordering requirements etc for
available_scan_masks.
tools
- Handle alignment of mixed sizes where the last element isn't the biggest
correctly. Seems that doesn't happen often!
adi,ad2s1210
- Lots of work from David Lechner on this driver including a few fixes
that are going with the rework to avoid slowing that down.
adi,ad4310
- Replace deprecated devm_clk_register()
adi,ad74413r
- Bring the channel function setting inline with the datasheet.
adi,ad7192
- Change to FIELD_PREP(), FIELD_GET().
- Calculate f_order from the sinc filter and chop filter states.
- Move more per chip config into data in struct ad7192_chip_info
- Cleanup unused parameter in channel macros.
adi,adf4350
- Make use of devm_* to simplify error handling for many of the setup
calls in probe() / tear down in remove() and error paths. Some more
work to be done on this one.
- Use dev_err_probe() for errors in probe() callback.
adi,adf4413
- Typo in function name prefix.
adi,adxl345
- Add channel scale to the chip type specific structure and drop
using a type field previously used for indirection.
asahi,ak8985
- Fix a mismatch introduced when switching from enum->pointers
in the match tables.
amlogic,meson
- Expand error logging during probe.
invensense,mpu6050
- Support level-shifter control. Whilst no one is sure exactly what this
is doing it is needed for some old boards.
- Document mount-matrix dt-binding.
mediatek,mt6577
- Use devm_clk_get_enabled() to replace open coded version and move
everything over to being device managed. Drop now empty remove()
callback. Fix follows to put the drvdata back.
- Use dev_err_probe() for error reporting in probe() callback.
memsic,mxc4005
- Add of_match_table.
microchip,mcp4725
- Move various chip specific data from being looked up by chip ID to
data in the chip type specific structure.
silicon-labs,si7005
- Add of_match_table and entry in trivial-devices.yaml
st,lsm6dsx
- Add missing mount-matrix dt binding documentation.
st,spear
- Use devm_clk_get_enabled() and some other devm calls to move everything
over to being device managed. Drop now empty remove() callback.
- Use dev_err_probe() to better handled deferred probing and tidy up
error reporting in probe() callback.
st,stm32-adc
- Add a bit of additional checking in probe() to protect against a NULL
pointer (no known path to trigger it today).
- Replace deprecated strncpy()
ti,ads1015
- Allow for edge triggers.
- Document interrupt in dt-bindings.
* tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits)
iio: Use device_get_match_data()
iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.
dt-bindings: trivial-devices: add silabs,si7005
iio: si7005: Add device tree support
drivers: imu: adis16475.c: Remove scan index from delta channels
dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property
iio: resolver: ad2s1210: remove of_match_ptr()
iio: resolver: ad2s1210: remove DRV_NAME macro
iio: resolver: ad2s1210: move out of staging
staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
staging: iio: resolver: ad2s1210: clear faults after soft reset
staging: iio: resolver: ad2s1210: refactor sample toggle
staging: iio: resolver: ad2s1210: remove fault attribute
staging: iio: resolver: ad2s1210: add label attribute support
staging: iio: resolver: ad2s1210: add register/fault support summary
staging: iio: resolver: ad2s1210: implement fault events
iio: event: add optional event label support
staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr
staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
...
When removing the BPF event for perf a feature test that checks if the
llvm devel files are availabe was removed but that is also used by
bpftool.
bpftool uses it to decide what kind of disassembly it will use: llvm or
binutils based.
Removing the tools/build/feature/test-llvm.cpp file made bpftool to
always fallback to binutils disassembly, even with the llvm devel files
installed, fix it by restoring just that small test-llvm.cpp test file.
Fixes: 56b11a2126 ("perf bpf: Remove support for embedding clang for compiling BPF events (-e foo.c)")
Reported-by: Manu Bretelle <chantr4@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Manu Bretelle <chantr4@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/lkml/ZTGa0Ukt7QyxWcVy@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds 4 subtests to demonstrate these patterns and validating
correctness.
subtest1:
1) We use task_iter to iterate all process in the system and search for the
current process with a given pid.
2) We create some threads in current process context, and use
BPF_TASK_ITER_PROC_THREADS to iterate all threads of current process. As
expected, we would find all the threads of current process.
3) We create some threads and use BPF_TASK_ITER_ALL_THREADS to iterate all
threads in the system. As expected, we would find all the threads which was
created.
subtest2:
We create a cgroup and add the current task to the cgroup. In the
BPF program, we would use bpf_for_each(css_task, task, css) to iterate all
tasks under the cgroup. As expected, we would find the current process.
subtest3:
1) We create a cgroup tree. In the BPF program, we use
bpf_for_each(css, pos, root, XXX) to iterate all descendant under the root
with pre and post order. As expected, we would find all descendant and the
last iterating cgroup in post-order is root cgroup, the first iterating
cgroup in pre-order is root cgroup.
2) We wse BPF_CGROUP_ITER_ANCESTORS_UP to traverse the cgroup tree starting
from leaf and root separately, and record the height. The diff of the
hights would be the total tree-high - 1.
subtest4:
Add some failure testcase when using css_task, task and css iters, e.g,
unlock when using task-iters to iterate tasks.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Link: https://lore.kernel.org/r/20231018061746.111364-9-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The newly-added struct bpf_iter_task has a name collision with a selftest
for the seq_file task iter's bpf skel, so the selftests/bpf/progs file is
renamed in order to avoid the collision.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-8-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This Patch adds kfuncs bpf_iter_css_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_css in open-coded iterator
style. These kfuncs actually wrapps css_next_descendant_{pre, post}.
css_iter can be used to:
1) iterating a sepcific cgroup tree with pre/post/up order
2) iterating cgroup_subsystem in BPF Prog, like
for_each_mem_cgroup_tree/cpuset_for_each_descendant_pre in kernel.
The API design is consistent with cgroup_iter. bpf_iter_css_new accepts
parameters defining iteration order and starting css. Here we also reuse
BPF_CGROUP_ITER_DESCENDANTS_PRE, BPF_CGROUP_ITER_DESCENDANTS_POST,
BPF_CGROUP_ITER_ANCESTORS_UP enums.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-5-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds kfuncs bpf_iter_task_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_task in open-coded iterator
style. BPF programs can use these kfuncs or through bpf_for_each macro to
iterate all processes in the system.
The API design keep consistent with SEC("iter/task"). bpf_iter_task_new()
accepts a specific task and iterating type which allows:
1. iterating all process in the system (BPF_TASK_ITER_ALL_PROCS)
2. iterating all threads in the system (BPF_TASK_ITER_ALL_THREADS)
3. iterating all threads of a specific task (BPF_TASK_ITER_PROC_THREADS)
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Link: https://lore.kernel.org/r/20231018061746.111364-4-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds kfuncs bpf_iter_css_task_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_css_task in open-coded
iterator style. These kfuncs actually wrapps css_task_iter_{start,next,
end}. BPF programs can use these kfuncs through bpf_for_each macro for
iteration of all tasks under a css.
css_task_iter_*() would try to get the global spin-lock *css_set_lock*, so
the bpf side has to be careful in where it allows to use this iter.
Currently we only allow it in bpf_lsm and bpf iter-s.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-3-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend the support to full range of min/max checks.
None of the existing YNL families required complex integer validation.
The support is less than trivial, because we try to keep struct nla_policy
tiny the min/max members it holds in place are s16. Meaning we can only
express checks in range of s16. For larger ranges we need to define
a structure and link it in the policy.
Link: https://lore.kernel.org/r/20231018163917.2514503-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For range validation we'll need to know if any individual
attribute is used on input (i.e. whether we will generate
a policy for it). Track this information.
Link: https://lore.kernel.org/r/20231018163917.2514503-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expand the sockopt test to use also check for io_uring {g,s}etsockopt
commands operations.
This patch starts by marking each test if they support io_uring support
or not.
Right now, io_uring cmd getsockopt() has a limitation of only
accepting level == SOL_SOCKET, otherwise it returns -EOPNOTSUPP. Since
there aren't any test exercising getsockopt(level == SOL_SOCKET), this
patch changes two tests to use level == SOL_SOCKET, they are
"getsockopt: support smaller ctx->optlen" and "getsockopt: read
ctx->optlen".
There is no limitation for the setsockopt() part.
Later, each test runs using regular {g,s}etsockopt systemcalls, and, if
liburing is supported, execute the same test (again), but calling
liburing {g,s}setsockopt commands.
This patch also changes the level of two tests to use SOL_SOCKET for the
following two tests. This is going to help to exercise the io_uring
subsystem:
* getsockopt: read ctx->optlen
* getsockopt: support smaller ctx->optlen
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-12-leitao@debian.org
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of defining basic io_uring functions in the test case, move them
to a common directory, so, other tests can use them.
This simplify the test code and reuse the common liburing
infrastructure. This is basically a copy of what we have in
io_uring_zerocopy_tx with some minor improvements to make checkpatch
happy.
A follow-up test will use the same helpers in a BPF sockopt test.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-8-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This file will be used by mini_uring.h and allow tests to run without
the need of installing liburing to run the tests.
This is needed to run io_uring tests in BPF, such as
(tools/testing/selftests/bpf/prog_tests/sockopt.c).
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-7-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as fairly
clear-cut user reported regressions. The mlx5 DMA bug was causing strife
for 390x folks. The fixes themselves are not particularly scary, tho.
No open investigations / outstanding reports at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations,
make devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve,
previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset",
needs more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting,
it was denied to plug a constant source of bugs but turns out
.NET depends on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560",
it's causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains
a single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding
(bless Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=z1F6
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter, WiFi.
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
fairly clear-cut user reported regressions. The mlx5 DMA bug was
causing strife for 390x folks. The fixes themselves are not
particularly scary, tho. No open investigations / outstanding reports
at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations, make
devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
curve, previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset", needs
more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting, it was
denied to plug a constant source of bugs but turns out .NET depends
on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560", it's
causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow"
* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
Revert "ethtool: Fix mod state of verbose no_mask bitset"
selftests: mptcp: join: no RST when rm subflow/addr
mptcp: avoid sending RST when closing the initial subflow
mptcp: more conservative check for zero probes
tcp: check mptcp-level constraints for backlog coalescing
selftests: mptcp: join: correctly check for no RST
net: ti: icssg-prueth: Fix r30 CMDs bitmasks
selftests: net: add very basic test for netdev names and namespaces
net: move altnames together with the netdevice
net: avoid UAF on deleted altname
net: check for altname conflicts when changing netdev's netns
net: fix ifname in netlink ntf during netns move
net: ethernet: ti: Fix mixed module-builtin object
net: phy: bcm7xxx: Add missing 16nm EPHY statistics
ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
tcp_bpf: properly release resources on error paths
net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
net: mdio-mux: fix C45 access returning -EIO after API change
tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
octeon_ep: update BQL sent bytes before ringing doorbell
...
Recently, we noticed that some RST were wrongly generated when removing
the initial subflow.
This patch makes sure RST are not sent when removing any subflows or any
addresses.
Fixes: c2b2ae3925 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit mentioned below was more tolerant with the number of RST seen
during a test because in some uncontrollable situations, multiple RST
can be generated.
But it was not taking into account the case where no RST are expected:
this validation was then no longer reporting issues for the 0 RST case
because it is not possible to have less than 0 RST in the counter. This
patch fixes the issue by adding a specific condition.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When dumping a struct_ops, 2 dictionaries are emitted.
When using `name`, they were already wrapped in an array, but not when
using `id`. Causing `jq` to fail at parsing the payload as it reached
the comma following the first dict.
This change wraps those dictionaries in an array so valid json is emitted.
Before, jq fails to parse the output:
```
$ sudo bpftool struct_ops dump id 1523612 | jq . > /dev/null
parse error: Expected value before ',' at line 19, column 2
```
After, no error parsing the output:
```
sudo ./bpftool struct_ops dump id 1523612 | jq . > /dev/null
```
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231018230133.1593152-3-chantr4@gmail.com
When printing a pointer value, "%p" will either print the hexadecimal
value of the pointer (e.g `0x1234`), or `(nil)` when NULL.
Both of those are invalid json "integer" values and need to be wrapped
in quotes.
Before:
```
$ sudo bpftool struct_ops dump name ned_dummy_cca | grep next
"next": (nil),
$ sudo bpftool struct_ops dump name ned_dummy_cca | \
jq '.[1].bpf_struct_ops_tcp_congestion_ops.data.list.next'
parse error: Invalid numeric literal at line 29, column 34
```
After:
```
$ sudo ./bpftool struct_ops dump name ned_dummy_cca | grep next
"next": "(nil)",
$ sudo ./bpftool struct_ops dump name ned_dummy_cca | \
jq '.[1].bpf_struct_ops_tcp_congestion_ops.data.list.next'
"(nil)"
```
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231018230133.1593152-2-chantr4@gmail.com
Add selftest for fixes around naming netdevs and namespaces.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some taprio tests need auxiliary scripts to wait for workqueue events to
process. Move them to a dedicated folder in order to package them for
the kselftests tarball.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231017152309.3196320-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure CI builds using just tc-testing/config can run all tdc tests.
Some tests were broken because of missing knobs.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231017152309.3196320-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 7d5cb68af6 (perf/benchmark: add a new benchmark for
seccom_unotify) added a reference to __NR_seccomp into perf. This is
fine as it added also a definition of __NR_seccomp for 64-bit. But it
failed to do so for 32-bit as instead of ifndef, ifdef was used.
Fix this typo (so fix the build of perf on 32-bit).
Fixes: 7d5cb68af6 (perf/benchmark: add a new benchmark for seccom_unotify)
Cc: Andrei Vagin <avagin@google.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231017083019.31733-1-jirislaby@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Add tests to verify setting ID registers from userspace is handled
correctly by KVM. Also add a test case to use ioctl
KVM_ARM_GET_REG_WRITABLE_MASKS to get writable masks.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231011195740.3349631-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The users of sysreg.h (perf, KVM selftests) are now generating the
necessary sysreg-defs.h; sync sysreg.h with the kernel sources and
fix the KVM selftests that use macros which suffered a rename.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231011195740.3349631-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Start generating sysreg-defs.h for arm64 builds in anticipation of
updating sysreg.h to a version that depends on it.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231011195740.3349631-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Start generating sysreg-defs.h in anticipation of updating sysreg.h to a
version that needs the generated output.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231011195740.3349631-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Use a common Makefile for generating sysreg-defs.h, which will soon be
needed by perf and KVM selftests. The naming scheme of the generated
macros is not expected to change, so just refer to the canonical
script/data in the kernel source rather than copying to tools.
Co-developed-by: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231011195740.3349631-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The recent change made it possible to generate vmlinux.h from BTF and
to ignore the file. But we also have a minimal vmlinux.h that will be
used by default. It should not be ignored by GIT.
Fixes: b7a2d774c9 ("perf build: Add ability to build with a generated vmlinux.h")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310110451.rvdUZJEY-lkp@intel.com/
Cc: oe-kbuild-all@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
As Dmitry described in [1] changelog the current way of detecting
-s option is broken for new make.
Changing the tools/build -s option detection the same way as it was
fixed for root Makefile in [1].
[1] 4bf7358816 ("kbuild: Port silent mode detection to future gnu make.")
Cc: Dmitry Goncharov <dgoncharov@users.sf.net>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231008212251.236023-3-jolsa@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
As Dmitry described in [1] changelog the current way of detecting
-s option is broken for new make.
Changing the tools/build -s option detection the same way as it was
fixed for root Makefile in [1].
[1] 4bf7358816 ("kbuild: Port silent mode detection to future gnu make.")
Cc: Dmitry Goncharov <dgoncharov@users.sf.net>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231008212251.236023-2-jolsa@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
My original comment lied, output can be "0 A A B 0 0 0\n"
(see comment in the code).
I don't quite understand why
get_mm_counter(mm, MM_FILEPAGES) + get_mm_counter(mm, MM_SHMEMPAGES)
can stay positive but get_mm_counter(mm, MM_ANONPAGES) is always 0 after
everything is unmapped but that's just me.
[adobriyan@gmail.com: more or less rewritten]
Link: https://lkml.kernel.org/r/0721ca69-7bb4-40aa-8d01-0c5f91e5f363@p183
Signed-off-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prior to f747e6667e __is_constexpr() was in its only user minmax.h.
That commit moved it to const.h - but that file just defines ULL(x) and
UL(x) so that constants can be defined for .S and .c files.
So apart from the word 'const' it wasn't really a good location. Instead
move the definition to compiler.h just before the similar
is_signed_type() and is_unsigned_type().
This may not be a good long-term home, but the three definitions belong
together.
Link: https://lkml.kernel.org/r/2a6680bbe2e84459816a113730426782@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Organize the usage options alphabetically and improve the description of
some options. Also separate the more complicated cull options from the
single use compare options.
Link: https://lkml.kernel.org/r/20231013190350.579407-6-audra@redhat.com
Signed-off-by: Audra Mitchell <audra@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the additional commands and timestamps added to the tool, the default
case (-t) has been broken. Now that the allocation timestamps are saved
outside of the txt field, allow us to properly sort the data by number of
times the record has been seen. Furthermore prevent the misuse of the
commandline arguments so only one compare option can be used.
Link: https://lkml.kernel.org/r/20231013190350.579407-5-audra@redhat.com
Signed-off-by: Audra Mitchell <audra@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the introduction of allocation timestamps being included in
page_owner output, each record becomes unique due to the timestamp
nanosecond granularity. Remove the check in add_list that tries to
collate each record during processing as the memcmp() is just additional
overhead at this point.
Also keep the allocation timestamps, but allow collation to occur without
consideration of the allocation timestamp except in the case were
allocation timestamps are requested by the user (the -a option).
Link: https://lkml.kernel.org/r/20231013190350.579407-4-audra@redhat.com
Signed-off-by: Audra Mitchell <audra@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the removal of free timestamps from page_owner output, we no longer
need to handle this case or the "unreleased" case. Remove all references
to both cases.
Link: https://lkml.kernel.org/r/20231013190350.579407-3-audra@redhat.com
Signed-off-by: Audra Mitchell <audra@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch add a new kselftest to demonstrate and verify the new hugetlb
memcg accounting behavior.
Link: https://lkml.kernel.org/r/20231006184629.155543-5-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Create a selftest that exercises the race between page faults and
madvise(MADV_DONTNEED) in the same huge page. Do it by running two
threads that touches the huge page and madvise(MADV_DONTNEED) at the same
time.
In case of a SIGBUS coming at pagefault, the test should fail, since we
hit the bug.
The test doesn't have a signal handler, and if it fails, it fails like
the following
----------------------------------
running ./hugetlb_fault_after_madv
----------------------------------
./run_vmtests.sh: line 186: 595563 Bus error (core dumped) "$@"
[FAIL]
This selftest goes together with the fix of the bug[1] itself.
[1] https://lore.kernel.org/all/20231001005659.2185316-1-riel@surriel.com/#r
Link: https://lkml.kernel.org/r/20231005163922.87568-3-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Tested-by: Rik van Riel <riel@surriel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "New selftest for mm", v2.
This is a simple test case that reproduces an mm problem[1], where a page
fault races with madvise(), and it is not trivial to reproduce and debug.
This test-case aims to avoid such race problems from happening again,
impacting workloads that leverages external allocators, such as tcmalloc,
jemalloc, etc.
[1] https://lore.kernel.org/all/20231001005659.2185316-1-riel@surriel.com/#r
This patch (of 2):
get_free_hugepages() is helpful for other hugepage tests. Export it to
the common file (vm_util.c) to be reused.
Link: https://lkml.kernel.org/r/20231005163922.87568-1-leitao@debian.org
Link: https://lkml.kernel.org/r/20231005163922.87568-2-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The bulk allocation is iterating through an array and storing enough
memory for the entire bulk allocation instead of a single array entry.
Only allocate an array element of the size set in the kmem_cache.
Link: https://lkml.kernel.org/r/20230929201359.2857583-1-Liam.Howlett@oracle.com
Fixes: cc86e0c2f3 ("radix tree test suite: add support for slab bulk APIs")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add pagemap ioctl tests. Add several different types of tests to judge
the correction of the interface.
Link: https://lkml.kernel.org/r/20230821141518.870589-7-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
New IOCTL and macros has been added in the kernel sources. Update the
tools header file as well.
Link: https://lkml.kernel.org/r/20230821141518.870589-5-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 20d96b25cc ("selftests/resctrl: Fix schemata write error
check") exposed a problem in feature detection logic in MBM selftest.
If schemata does not support MB:x=x entries, the schemata write to
initialize 100% memory bandwidth allocation in mbm_setup() will now
fail with -EINVAL due to the error handling corrected by the commit
20d96b25cc ("selftests/resctrl: Fix schemata write error check").
That commit just uncovers the failed write, it is not wrong itself.
If MB:x=x is not supported by schemata, it is safe to assume 100%
memory bandwidth is always set. Therefore, the previously ignored error
does not make the MBM test itself wrong.
Restore the previous behavior of MBM test by checking MB support before
attempting to write it into schemata which results in behavior
equivalent to ignoring the write error.
Fixes: 20d96b25cc ("selftests/resctrl: Fix schemata write error check")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The clone3() selftests currently report test results in a format that does
not mesh entirely well with automation. They log output for each test such
as:
# [1382411] Trying clone3() with flags 0 (size 0)
# I am the parent (1382411). My child's pid is 1382412
# I am the child, my PID is 1382412
# [1382411] clone3() with flags says: 0 expected 0
ok 1 [1382411] Result (0) matches expectation (0)
This is not ideal for automated parsers since the text after the "ok 1" is
treated as the test name when comparing runs by a lot of automation (tests
routinely get renumbered due to things like new tests being added based on
logical groupings). The PID means that the test names will frequently vary
and the rest of the name being a description of results means several tests
have identical text there.
Address this by refactoring things so that we have a static descriptive
name for each test which we use when logging passes, failures and skips
and since we now have a stable name for the test to hand log that before
starting the test to address the common issue reading logs where the test
name is only printed after any diagnostics. The result is:
# Running test 'simple clone3()'
# [1562777] Trying clone3() with flags 0 (size 0)
# I am the parent (1562777). My child's pid is 1562778
# I am the child, my PID is 1562778
# [1562777] clone3() with flags says: 0 expected 0
ok 1 simple clone3()
In order to handle skips a bit more neatly this is done in a moderately
invasive fashion where we move from a sequence of function calls to having
an array of test parameters. This hopefully also makes it a little easier
to see what the tests are doing when looking at both the source and the
logs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
when the argument type is 'unsigned int',printf '%u'
in format string. Problem found during code reading.
Update commit log with information on how the problem
was found:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The opened file should be closed in main(), otherwise resource
leak will occur that this problem was discovered by code reading
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is the riscv variant of commit 9855c4626c ("selftests/ftrace:
Add ppc support for kprobe args tests").
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Users complained about OOM errors during fork without triggering
compaction. This can be fixed by modifying the flags used in
mas_expected_entries() so that the compaction will be triggered in low
memory situations. Since mas_expected_entries() is only used during fork,
the extra argument does not need to be passed through.
Additionally, the two test_maple_tree test cases and one benchmark test
were altered to use the correct locking type so that allocations would not
trigger sleeping and thus fail. Testing was completed with lockdep atomic
sleep detection.
The additional locking change requires rwsem support additions to the
tools/ directory through the use of pthreads pthread_rwlock_t. With this
change test_maple_tree works in userspace, as a module, and in-kernel.
Users may notice that the system gave up early on attempting to start new
processes instead of attempting to reclaim memory.
Link: https://lkml.kernel.org/r/20230915093243epcms1p46fa00bbac1ab7b7dca94acb66c44c456@epcms1p4
Link: https://lkml.kernel.org/r/20231012155233.2272446-1-Liam.Howlett@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <jason.sim@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When execute the following command to test clone3 under !CONFIG_TIME_NS:
# make headers && cd tools/testing/selftests/clone3 && make && ./clone3
we can see the following error info:
# [7538] Trying clone3() with flags 0x80 (size 0)
# Invalid argument - Failed to create new process
# [7538] clone3() with flags says: -22 expected 0
not ok 18 [7538] Result (-22) is different than expected (0)
...
# Totals: pass:18 fail:1 xfail:0 xpass:0 skip:0 error:0
This is because if CONFIG_TIME_NS is not set, but the flag
CLONE_NEWTIME (0x80) is used to clone a time namespace, it
will return -EINVAL in copy_time_ns().
If kernel does not support CONFIG_TIME_NS, /proc/self/ns/time
will be not exist, and then we should skip clone3() test with
CLONE_NEWTIME.
With this patch under !CONFIG_TIME_NS:
# make headers && cd tools/testing/selftests/clone3 && make && ./clone3
...
# Time namespaces are not supported
ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME
...
# Totals: pass:18 fail:0 xfail:0 xpass:0 skip:1 error:0
Link: https://lkml.kernel.org/r/1689066814-13295-1-git-send-email-yangtiezhu@loongson.cn
Fixes: 515bddf0ec ("selftests/clone3: test clone3 with CLONE_NEWTIME")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Definition for MREMAP_DONTUNMAP is not present in glibc older than 2.32
thus throwing an undeclared error when running make on mm. Including
linux/mman.h solves the build error for people having older glibc.
Link: https://lkml.kernel.org/r/20231012155257.891776-1-samasth.norway.ananda@oracle.com
Fixes: 0183d777c2 ("selftests: mm: remove duplicate unneeded defines")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linux-mm/CA+G9fYvV-71XqpCr_jhdDfEtN701fBdG3q+=bafaZiGwUXy_aA@mail.gmail.com/
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Don't mess with the host's firewall ruleset. Since audit logging is not
per-netns, add an initial delay of a second so other selftests' netns
cleanups have a chance to finish.
Fixes: e8dbde59ca ("selftests: netfilter: Test nf_tables audit logging")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
When resetting multiple objects at once (via dump request), emit a log
message per table (or filled skb) and resurrect the 'entries' parameter
to contain the number of objects being logged for.
To test the skb exhaustion path, perform some bulk counter and quota
adds in the kselftest.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com> (Audit)
Signed-off-by: Florian Westphal <fw@strlen.de>
Assume that caller's 'to' offset really represents an upper boundary for
the pattern search, so patterns extending past this offset are to be
rejected.
The old behaviour also was kind of inconsistent when it comes to
fragmentation (or otherwise non-linear skbs): If the pattern started in
between 'to' and 'from' offsets but extended to the next fragment, it
was not found if 'to' offset was still within the current fragment.
Test the new behaviour in a kselftest using iptables' string match.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: f72b948dcb ("[NET]: skb_find_text ignores to argument")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a follow-up to the commit 9b2b86332a ("bpf: Allow to use kfunc
XDP hints and frags together").
The are some possible implementations problems that may arise when providing
metadata specifically for multi-buffer packets, therefore there must be a
possibility to test such option separately.
Add an option to use multi-buffer AF_XDP xdp_hw_metadata and mark used XDP
program as capable to use frags.
As for now, xdp_hw_metadata accepts no options, so add simple option
parsing logic and a help message.
For quick reference, also add an ingress packet generation command to the
help message. The command comes from [0].
Example of output for multi-buffer packet:
xsk_ring_cons__peek: 1
0xead018: rx_desc[15]->addr=10000000000f000 addr=f100 comp_addr=f000
rx_hash: 0x5789FCBB with RSS type:0x29
rx_timestamp: 1696856851535324697 (sec:1696856851.5353)
XDP RX-time: 1696856843158256391 (sec:1696856843.1583)
delta sec:-8.3771 (-8377068.306 usec)
AF_XDP time: 1696856843158413078 (sec:1696856843.1584)
delta sec:0.0002 (156.687 usec)
0xead018: complete idx=23 addr=f000
xsk_ring_cons__peek: 1
0xead018: rx_desc[16]->addr=100000000008000 addr=8100 comp_addr=8000
0xead018: complete idx=24 addr=8000
xsk_ring_cons__peek: 1
0xead018: rx_desc[17]->addr=100000000009000 addr=9100 comp_addr=9000 EoP
0xead018: complete idx=25 addr=9000
Metadata is printed for the first packet only.
[0] https://lore.kernel.org/all/20230119221536.3349901-18-sdf@google.com/
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20231017162800.24080-1-larysa.zaremba@intel.com
I recently cleaned up specs to not specify enum-as-flags
when target enum is already defined as flags.
YNL Python library did not convert flags, unfortunately,
so this caused breakage for Stan and Willem.
Note that the nlspec.py abstraction already hides the differences
between flags and enums (value vs user_value), so the changes
are pretty trivial.
Fixes: 0629f22ec1 ("ynl: netdev: drop unnecessary enum-as-flags")
Reported-and-tested-by: Willem de Bruijn <willemb@google.com>
Reported-and-tested-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/all/ZS10NtQgd_BJZ3RU@google.com/
Link: https://lore.kernel.org/r/20231016213937.1820386-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a suite covering the fdb_n_learned and fdb_max_learned bridge
features, touching all special cases in accounting at least once.
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Johannes Nixdorf <jnixdorf-oss@avm.de>
Link: https://lore.kernel.org/r/20231016-fdb_limit-v5-5-32cddff87758@avm.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This version addresses issues with:
- When CPU 0 hotplug is not possible, try cgroup v2 isolation
without any user input
- Fix turbo mode enable/disable swapped
- Sanitize command line integer and hex arguments
- Add more error messages
- Increase CPU count in one request
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The abi_test currently uses a long sized test value for enablement
checks. On LE this works fine, however, on BE this results in inaccurate
assert checks due to a bit being used and assuming it's value is the
same on both LE and BE.
Use int type for 32-bit values and long type for 64-bit values to ensure
appropriate behavior on both LE and BE.
Fixes: 60b1af8de8 ("tracing/user_events: Add ABI self-test")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add several new test cases which assert corner cases on the mprog query
mechanism, for example, around passing in a too small or a larger array
than the current count.
./test_progs -t tc_opts
#252 tc_opts_after:OK
#253 tc_opts_append:OK
#254 tc_opts_basic:OK
#255 tc_opts_before:OK
#256 tc_opts_chain_classic:OK
#257 tc_opts_chain_mixed:OK
#258 tc_opts_delete_empty:OK
#259 tc_opts_demixed:OK
#260 tc_opts_detach:OK
#261 tc_opts_detach_after:OK
#262 tc_opts_detach_before:OK
#263 tc_opts_dev_cleanup:OK
#264 tc_opts_invalid:OK
#265 tc_opts_max:OK
#266 tc_opts_mixed:OK
#267 tc_opts_prepend:OK
#268 tc_opts_query:OK
#269 tc_opts_query_attach:OK
#270 tc_opts_replace:OK
#271 tc_opts_revision:OK
Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20231017081728.24769-1-daniel@iogearbox.net
Running shellcheck on stat_all_metricgroups.sh reports
below warning:
In ./tests/shell/stat_all_metricgroups.sh line 7:
function ParanoidAndNotRoot()
^-- SC2112: 'function' keyword is non-standard. Delete it.
As per the format, "function" is a non-standard keyword that
can be used to declare functions. Fix this by removing the
"function" keyword from ParanoidAndNotRoot function
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231013073021.99794-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on record_sideband.sh throws below
warning:
In tests/shell/record_sideband.sh line 25:
if ! perf record -o ${perfdata} -BN --no-bpf-event -C $1 true 2>&1 >/dev/null
^--^ SC2069: To redirect stdout+stderr, 2>&1 must be last (or use '{ cmd > file; } 2>&1' to clarify).
This shows shellcheck warning SC2069 where the redirection
order needs to be fixed. Use "cmd > /dev/null 2>&1" to fix
the redirection of perf record output
Fixes: 23b97c7ee9 ("perf test: Add test case for record sideband events")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: disgoel@linux.vnet.ibm.com
Link: https://lore.kernel.org/r/20231013073021.99794-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on lock_contention.sh generates below
warning
In tests/shell/lock_contention.sh line 36:
if [ `nproc` -lt 4 ]; then
^-----^ SC2046: Quote this to prevent word splitting.
Here since nproc will generate a single word output
and there is no possibility of word splitting, this
warning can be ignored. Use exception for this with
"disable" option in shellcheck. This warning is observed
after commit:
"commit 29441ab3a3 ("perf test lock_contention.sh: Skip test
if not enough CPUs")"
Fixes: 29441ab3a3 ("perf test lock_contention.sh: Skip test if not enough CPUs")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231013073021.99794-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Simple expression parser test fails in powerpc as below:
4: Simple expression parser
test child forked, pid 170385
Using CPUID 004e2102
division by zero
syntax error
syntax error
FAILED tests/expr.c:65 parse test failed
test child finished with -1
Simple expression parser: FAILED!
This is observed after commit:
'commit 9d5da30e4a ("perf jevents: Add a new expression builtin strcmp_cpuid_str()")'
With this commit, a new expression builtin strcmp_cpuid_str
got added. This function takes an 'ID' type value, which is
a string. So expression parse for strcmp_cpuid_str expects
const char * as cpuid value type. In case of powerpc, CPU IDs
are numbers. Hence it doesn't get interpreted correctly by
bison parser. Example in case of power9, cpuid string returns
as: 004e2102
cpuid of string type is expected in two cases:
1. char *get_cpuid_str(struct perf_pmu *pmu __maybe_unused);
Testcase "tests/expr.c" uses "perf_pmu__getcpuid" which calls
get_cpuid_str to get the cpuid string.
2. cpuid field in :struct pmu_events_map
struct pmu_events_map {
const char *arch;
const char *cpuid;
Here cpuid field is used in "perf_pmu__find_events_table"
function as "strcmp_cpuid_str(map->cpuid, cpuid)". The
value for cpuid field is picked from mapfile.csv.
Fix the mapfile.csv and get_cpuid_str function to prefix
cpuid with 0x so that it gets correctly interpreted by
the bison parser
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231009050052.64935-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When users pass the option '--timestamp' or '-T' in the record command,
all events will set the PERF_SAMPLE_TIME bit in the attribution. In
this case, the AUX event will record the kernel timestamp, but it
doesn't mean Arm CoreSight enables timestamp packets in its hardware
tracing.
If the option '--timestamp' or '-T' is set, this patch always enables
Arm CoreSight timestamp, as a result, the bit 28 in event's config is to
be set.
Before:
# perf record -e cs_etm// --per-thread --timestamp -- ls
# perf script --header-only
...
# event : name = cs_etm//, , id = { 69 }, type = 12, size = 136,
config = 0, { sample_period, sample_freq } = 1,
sample_type = IP|TID|TIME|CPU|IDENTIFIER, read_format = ID|LOST,
disabled = 1, enable_on_exec = 1, sample_id_all = 1, exclude_guest = 1
...
After:
# perf record -e cs_etm// --per-thread --timestamp -- ls
# perf script --header-only
...
# event : name = cs_etm//, , id = { 49 }, type = 12, size = 136,
config = 0x10000000, { sample_period, sample_freq } = 1,
sample_type = IP|TID|TIME|CPU|IDENTIFIER, read_format = ID|LOST,
disabled = 1, enable_on_exec = 1, sample_id_all = 1, exclude_guest = 1
...
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231014074159.1667880-3-leo.yan@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
So far, it's impossible to validate timestamp trace in Arm CoreSight when
the perf is in the per-thread mode. E.g. for the command:
perf record -e cs_etm/timestamp/ --per-thread -- ls
The command enables config 'timestamp' for 'cs_etm' event in the
per-thread mode. In this case, the function cs_etm_validate_config()
directly bails out and skips validation.
Given profiled process can be scheduled on any CPUs in the per-thread
mode, this patch validates timestamp tracing for all CPUs when detect
the CPU map is empty.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231014074159.1667880-2-leo.yan@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The default config is computed during creation of the PMU and may do
things like scanning sysfs, when the PMU may just be used as part of
scanning. Change default_config to perf_event_attr_init_default, a
callback that is used when a default config needs initializing. This
avoids holding onto the memory for a perf_event_attr and copying.
On a tigerlake laptop running the pmu-scan benchmark:
Before:
Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 28.780 usec (+- 0.503 usec)
Average PMU scanning took: 283.480 usec (+- 18.471 usec)
Number of openat syscalls: 30,227
After:
Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 27.880 usec (+- 0.169 usec)
Average PMU scanning took: 245.260 usec (+- 15.758 usec)
Number of openat syscalls: 28,914
Over 3 runs it is a nearly 12% reduction in execution time and a 4.3%
of openat calls.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
strcmp_cpuid_str performs regular expression comparisons and so per
CPUID linear searches over the perf_events_map are expensive. Add a
helper function called map_for_pmu that does the search but also
caches the map specific to a PMU. As the PMU may differ, also cache
the CPUID string so that PMUs with the same CPUID string don't require
the linear search and regular expression comparisons. This speeds
loading PMUs as the search is done once per PMU to find the
appropriate tables.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add const to related APIs, this is so they can be used to default
initialize a perf_event_attr from a const pmu.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
File APIs don't alter the struct pmu so allow const ones to be passed.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Avoid setting PMU values in arm_spe_pmu_default_config, move to
perf_pmu__arch_init.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Avoid setting PMU values in intel_pt_pmu_default_config, move to
perf_pmu__arch_init.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Assign default_config as part of the init. perf_pmu__get_default_config
was doing more than just getting the default config and so this is
intended to better align with the code.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231012175645.1849503-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use get_unaligned_le64() instead of memcpy_le64(..., 8) because it produces
simpler code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20231005190451.175568-6-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Avoid unaligned access by using get_unaligned_le16(), get_unaligned_le32()
and get_unaligned_le64().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20231005190451.175568-5-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add get_unaligned_le16(), get_unaligned_le32 and get_unaligned_le64, same
as include/asm-generic/unaligned.h. And add include/asm-generic/unaligned.h
to check-headers.sh bringing tools/include/asm-generic/unaligned.h up to
date so that the kernel and tools versions match.
Use diagnostic pragmas to ignore -Wpacked used by perf build.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20231005190451.175568-2-adrian.hunter@intel.com
Link: https://lore.kernel.org/r/20231010142234.20061-1-adrian.hunter@intel.com
[ squashed check-header.sh addition ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
From kernel version 6.5, CPU 0 hotplug capability is deprecated.
If some SST profile doesn't have CPU 0, then it is no longer possible to
offline CPU 0. This means that user space threads will still run on
CPU 0.
To workaround this issue, use cgroup v2 isolation feature. Whenever there
/sys/devices/system/cpu/cpu0/online file is absent or open fails, isolate
CPU 0 via CPU cgroup v2 isolation. Also add a command line option to
force even if the /sys/devices/system/cpu/cpu0/online is present.
The previous commit "01bcb56f059e ("tools/power/x86/intel-speed-select:
Prevent CPU 0 offline") was just warning about this issue based on the
kernel version 6.5 and above. With this new approach, instead of warning
take action to mitigate the issue.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
With the increase in the CPU count, this count needs to be updated.
Increase max CPU count to 512.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When core-power is getting enabled, if the feaure is not supported,
display error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The command for turbo-mode enable and disable is swapped. Fix that.
Previously turbo-mode enable was actually disabling and disable was
enabling.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
TRL (turbo ratio limit) argument is passed in hex string. Clarify that
in the help.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
If the command takes some integer arguments, make sure the command
contains only digits. Same for Hex arguments. Otherwise return error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The result is as follows:
$ tools/testing/selftests/bpf/test_progs --name=task_under_cgroup
#237 task_under_cgroup:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Without the previous patch, there will be RCU warnings in dmesg when
CONFIG_PROVE_RCU is enabled. While with the previous patch, there will
be no warnings.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20231007135945.4306-2-laoar.shao@gmail.com
Fix too eager assumption that SHT_GNU_verdef ELF section is going to be
present whenever binary has SHT_GNU_versym section. It seems like either
SHT_GNU_verdef or SHT_GNU_verneed can be used, so failing on missing
SHT_GNU_verdef actually breaks use cases in production.
One specific reported issue, which was used to manually test this fix,
was trying to attach to `readline` function in BASH binary.
Fixes: bb7fa09399 ("libbpf: Support symbol versioning for uprobe")
Reported-by: Liam Wisehart <liamwisehart@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Manu Bretelle <chantr4@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20231016182840.4033346-1-andrii@kernel.org
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZS1d4wAKCRDbK58LschI
g4DSAP441CdKh8fd+wNKUSKHFbpCQ6EvocR6Nf+Sj2DFUx/w/QEA7mfju7Abqjc3
xwDEx0BuhrjMrjV5MmEpxc7lYl9XcQU=
=vuWk
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-16
We've added 90 non-merge commits during the last 25 day(s) which contain
a total of 120 files changed, 3519 insertions(+), 895 deletions(-).
The main changes are:
1) Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs, from Jiri Olsa.
2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is
for systemd to reimplement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services, from Daan De Meyer.
3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich.
4) Improve BPF verifier log output for scalar registers to better
disambiguate their internal state wrt defaults vs min/max values
matching, from Andrii Nakryiko.
5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving
the source IP address with a new BPF_FIB_LOOKUP_SRC flag,
from Martynas Pumputis.
6) Add support for open-coded task_vma iterator to help with symbolization
for BPF-collected user stacks, from Dave Marchevsky.
7) Add libbpf getters for accessing individual BPF ring buffers which
is useful for polling them individually, for example, from Martin Kelly.
8) Extend AF_XDP selftests to validate the SHARED_UMEM feature,
from Tushar Vyavahare.
9) Improve BPF selftests cross-building support for riscv arch,
from Björn Töpel.
10) Add the ability to pin a BPF timer to the same calling CPU,
from David Vernet.
11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic
implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments,
from Alexandre Ghiti.
12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen.
13) Fix bpftool's skeleton code generation to guarantee that ELF data
is 8 byte aligned, from Ian Rogers.
14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4
security mitigations in BPF verifier, from Yafang Shao.
15) Annotate struct bpf_stack_map with __counted_by attribute to prepare
BPF side for upcoming __counted_by compiler support, from Kees Cook.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits)
bpf: Ensure proper register state printing for cond jumps
bpf: Disambiguate SCALAR register state output in verifier logs
selftests/bpf: Make align selftests more robust
selftests/bpf: Improve missed_kprobe_recursion test robustness
selftests/bpf: Improve percpu_alloc test robustness
selftests/bpf: Add tests for open-coded task_vma iter
bpf: Introduce task_vma open-coded iterator kfuncs
selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c
bpf: Don't explicitly emit BTF for struct btf_iter_num
bpf: Change syscall_nr type to int in struct syscall_tp_t
net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set
bpf: Avoid unnecessary audit log for CPU security mitigations
selftests/bpf: Add tests for cgroup unix socket address hooks
selftests/bpf: Make sure mount directory exists
documentation/bpf: Document cgroup unix socket address hooks
bpftool: Add support for cgroup unix socket address hooks
libbpf: Add support for cgroup unix socket address hooks
bpf: Implement cgroup sockaddr hooks for unix sockets
bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf
bpf: Propagate modified uaddrlen from cgroup sockaddr programs
...
====================
Link: https://lore.kernel.org/r/20231016204803.30153-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix the handling of the phycal timer offset when FEAT_ECV
and CNTPOFF_EL2 are implemented.
- Restore the functionnality of Permission Indirection that
was broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
MIPS:
- Fix W=1 build.
s390:
- One small fix for gisa to avoid stalls.
x86:
- Truncate writes to PMU counters to the counter's width to avoid spurious
overflows when emulating counter events in software.
- Set the LVTPC entry mask bit when handling a PMI (to match Intel-defined
architectural behavior).
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work to
kick the guest out of emulated halt.
- Fix for loading XSAVE state from an old kernel into a new one.
- Fixes for AMD AVIC
selftests:
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUtvXgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOE3gf/Q0Xvi/oU/+iDMuvfCbMZg/nhbrsa
WmE/zXLrCF0DknppAsWulkhLGL2ceL6X+f37f2vWpBdG9SVDG/vSAg+QQDwsXiKN
hTJoaybtMMPZM64emPZKeLMrq3A/U32qIMmWMJkoQRyz6dftUhGqZEuy1jw8oomJ
n9idRDCMkbo+bick4URt0FEuI3Tf6dPIlG7P5hObFTw+nenzzxTjoxWZ432Mgyod
yqveEke4hcQ+6K1zdAcDNZqT9ZhxeTxAO4yrBAYfnFoPLhUXKDUumkqAQPNOhKTo
YN+b29kHBm+HvYkHN785FQla/13wjE1aq5TUj5J7NEDv4uRXDefDq2OAeg==
=b9AY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of the phycal timer offset when FEAT_ECV and
CNTPOFF_EL2 are implemented
- Restore the functionnality of Permission Indirection that was
broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
MIPS:
- Fix W=1 build
s390:
- One small fix for gisa to avoid stalls
x86:
- Truncate writes to PMU counters to the counter's width to avoid
spurious overflows when emulating counter events in software
- Set the LVTPC entry mask bit when handling a PMI (to match
Intel-defined architectural behavior)
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work
to kick the guest out of emulated halt
- Fix for loading XSAVE state from an old kernel into a new one
- Fixes for AMD AVIC
selftests:
- Play nice with %llx when formatting guest printf and assert
statements
- Clean up stale test metadata
- Zero-initialize structures in memslot perf test to workaround a
suspected 'may be used uninitialized' false positives from GCC"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: arm64: timers: Correctly handle TGE flip with CNTPOFF_EL2
KVM: arm64: POR{E0}_EL1 do not need trap handlers
KVM: arm64: Add nPIR{E0}_EL1 to HFG traps
KVM: MIPS: fix -Wunused-but-set-variable warning
KVM: arm64: pmu: Drop redundant check for non-NULL kvm_pmu_events
KVM: SVM: Fix build error when using -Werror=unused-but-set-variable
x86: KVM: SVM: refresh AVIC inhibition in svm_leave_nested()
x86: KVM: SVM: add support for Invalid IPI Vector interception
x86: KVM: SVM: always update the x2avic msr interception
KVM: selftests: Force load all supported XSAVE state in state test
KVM: selftests: Load XSAVE state into untouched vCPU during state test
KVM: selftests: Touch relevant XSAVE state in guest for state test
KVM: x86: Constrain guest-supported xfeatures only at KVM_GET_XSAVE{2}
x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer
KVM: selftests: Zero-initialize entire test_result in memslot perf test
KVM: selftests: Remove obsolete and incorrect test case metadata
KVM: selftests: Treat %llx like %lx when formatting guest printf
KVM: x86/pmu: Synthesize at most one PMI per VM-exit
KVM: x86: Mask LVTPC when handling a PMI
KVM: x86/pmu: Truncate counter value to allowed width on write
...
This adds a new test case to the ksm functional tests to make sure that
the KSM setting is inherited by the child process when doing a fork/exec.
Link: https://lkml.kernel.org/r/20230922211141.320789-3-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Carl Klemm <carl@uvos.xyz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In selftests/amd-pstate, distro `perf` is used to capture `perf stat`
while running microbenchmarks. Distro `perf` is not working with
upstream kernel. Fix this by providing an option to give the perf
binary path.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In selftests/amd-pstate, tbench and gitsource microbenchmarks are
used to compare the performance with different governors. In current
implementation the relative path to run `amd_pstate_tracer.py` is broken.
Fix this by using absolute paths.
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
TEST_LENGTH passing ".size = sizeof(struct _struct) - 1" expects -EINVAL
from "if (ucmd.user_size < op->min_size)" check in iommufd_fops_ioctl().
This has been working when min_size is exactly the size of the structure.
However, if the size of the structure becomes larger than min_size, i.e.
the passing size above is larger than min_size, that min_size sanity no
longer works.
Since the first test in TEST_LENGTH() was to test that min_size sanity
routine, rework it to support a min_size calculation, rather than using
the full size of the structure.
Link: https://lore.kernel.org/r/20231015074648.24185-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the way that verifier prints SCALAR_VALUE register state (and
PTR_TO_PACKET, which can have var_off and ranges info as well) is very
ambiguous.
In the name of brevity we are trying to eliminate "unnecessary" output
of umin/umax, smin/smax, u32_min/u32_max, and s32_min/s32_max values, if
possible. Current rules are that if any of those have their default
value (which for mins is the minimal value of its respective types: 0,
S32_MIN, or S64_MIN, while for maxs it's U32_MAX, S32_MAX, S64_MAX, or
U64_MAX) *OR* if there is another min/max value that as matching value.
E.g., if smin=100 and umin=100, we'll emit only umin=10, omitting smin
altogether. This approach has a few problems, being both ambiguous and
sort-of incorrect in some cases.
Ambiguity is due to missing value could be either default value or value
of umin/umax or smin/smax. This is especially confusing when we mix
signed and unsigned ranges. Quite often, umin=0 and smin=0, and so we'll
have only `umin=0` leaving anyone reading verifier log to guess whether
smin is actually 0 or it's actually -9223372036854775808 (S64_MIN). And
often times it's important to know, especially when debugging tricky
issues.
"Sort-of incorrectness" comes from mixing negative and positive values.
E.g., if umin is some large positive number, it can be equal to smin
which is, interpreted as signed value, is actually some negative value.
Currently, that smin will be omitted and only umin will be emitted with
a large positive value, giving an impression that smin is also positive.
Anyway, ambiguity is the biggest issue making it impossible to have an
exact understanding of register state, preventing any sort of automated
testing of verifier state based on verifier log. This patch is
attempting to rectify the situation by removing ambiguity, while
minimizing the verboseness of register state output.
The rules are straightforward:
- if some of the values are missing, then it definitely has a default
value. I.e., `umin=0` means that umin is zero, but smin is actually
S64_MIN;
- all the various boundaries that happen to have the same value are
emitted in one equality separated sequence. E.g., if umin and smin are
both 100, we'll emit `smin=umin=100`, making this explicit;
- we do not mix negative and positive values together, and even if
they happen to have the same bit-level value, they will be emitted
separately with proper sign. I.e., if both umax and smax happen to be
0xffffffffffffffff, we'll emit them both separately as
`smax=-1,umax=18446744073709551615`;
- in the name of a bit more uniformity and consistency,
{u32,s32}_{min,max} are renamed to {s,u}{min,max}32, which seems to
improve readability.
The above means that in case of all 4 ranges being, say, [50, 100] range,
we'd previously see hugely ambiguous:
R1=scalar(umin=50,umax=100)
Now, we'll be more explicit:
R1=scalar(smin=umin=smin32=umin32=50,smax=umax=smax32=umax32=100)
This is slightly more verbose, but distinct from the case when we don't
know anything about signed boundaries and 32-bit boundaries, which under
new rules will match the old case:
R1=scalar(umin=50,umax=100)
Also, in the name of simplicity of implementation and consistency, order
for {s,u}32_{min,max} are emitted *before* var_off. Previously they were
emitted afterwards, for unclear reasons.
This patch also includes a few fixes to selftests that expect exact
register state to accommodate slight changes to verifier format. You can
see that the changes are pretty minimal in common cases.
Note, the special case when SCALAR_VALUE register is a known constant
isn't changed, we'll emit constant value once, interpreted as signed
value.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-5-andrii@kernel.org
Align subtest is very specific and finicky about expected verifier log
output and format. This is often completely unnecessary as in a bunch of
situations test actually cares about var_off part of register state. But
given how exact it is right now, any tiny verifier log changes can lead
to align tests failures, requiring constant adjustment.
This patch tries to make this a bit more robust by making logic first
search for specified register and then allowing to match only portion of
register state, not everything exactly. This will come handly with
follow up changes to SCALAR register output disambiguation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-4-andrii@kernel.org
Given missed_kprobe_recursion is non-serial and uses common testing
kfuncs to count number of recursion misses it's possible that some other
parallel test can trigger extraneous recursion misses. So we can't
expect exactly 1 miss. Relax conditions and expect at least one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-3-andrii@kernel.org
Make these non-serial tests filter BPF programs by intended PID of
a test runner process. This makes it isolated from other parallel tests
that might interfere accidentally.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-2-andrii@kernel.org
Zero out the buffer for readlink() since readlink() does not append a
terminating null byte to the buffer. Also change the buffer length
passed to readlink() to 'PATH_MAX - 1' to ensure the resulting string
is always null terminated.
Fixes: 833c12ce0f ("selftests/x86/lam: Add inherit test cases for linear-address masking")
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20231016062446.695-1-binbin.wu@linux.intel.com
Fixes: 8bd2f71054 ("virtio_ring: introduce dma sync api for virtqueue")
also add dma sync api for virtio test.
Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com>
Message-Id: <20231008031734.1095-1-liming.wu@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These variables are never referenced in the code, just remove them
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the previous code, the 'mds' and 'nrhandler' variables were not
utilized in the codebase. Additionally, there was a potential NULL
pointer dereference and memory leak due to improper handling of memory
reallocation failure.
This patch removes the unused 'mds' and 'nrhandler' variables along with
the associated code, addressing the unused variable issue, NULL pointer
dereference issue and the memory leak issue.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230926173736.1142420-1-visitorckw@gmail.com
Add option to test timestamp event queue mask manipulation in testptp.
Option -F allows the user to specify a single channel that will be
applied on the mask filter via IOCTL.
The test program will maintain the file open until user input is
received.
This allows checking the effect of the IOCTL in debugfs.
eg:
Console 1:
```
Channel 12 exclusively enabled. Check on debugfs.
Press any key to continue
```
Console 2:
```
0x00000000 0x00000001 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000
```
Signed-off-by: Xabier Marquiegui <reibax@gmail.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use debugfs to be able to view channel mask applied to every timestamp
event queue.
Every time the device is opened, a new entry is created in
`$DEBUGFS_MOUNTPOINT/ptpN/$INSTANCE_ADDRESS/mask`.
The mask value can be viewed grouped in 32bit decimal values using cat,
or converted to hexadecimal with the included `ptpchmaskfmt.sh` script.
32 bit values are listed from least significant to most significant.
Signed-off-by: Xabier Marquiegui <reibax@gmail.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ct_tuple v4 data structure decode / encode routines were using
the v6 IP address decode and relying on default encode. This could
cause exceptions during encode / decode depending on how a ct4
tuple would appear in a netlink message.
Caught during code review.
Fixes: e52b07aa1a ("selftests: openvswitch: add flow dump support")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernels that don't have support for openvswitch drop reasons also
won't have the drop counter reasons, so we should skip the test
completely. It previously wasn't possible to build a test case
for this without polluting the datapath, so we introduce a mechanism
to clear all the flows from a datapath allowing us to test for
explicit drop actions, and then clear the flows to build the
original test case.
Fixes: 4242029164 ("selftests: openvswitch: add explicit drop testcase")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of fatal signal, or early abort at least cleanup the current
test case.
Fixes: 25f16c873f ("selftests: add openvswitch selftest suite")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni reports that on some systems the pyroute2 version isn't
new enough to run the test suite. Ensure that we support a minimum
version of 0.6 for all cases (which does include the existing ones).
The 0.6.1 version was released in May of 2021, so should be
propagated to most installations at this point.
The alternative that Paolo proposed was to only skip when the
add-flow is being run. This would be okay for most cases, except
if a future test case is added that needs to do flow dump without
an associated add (just guessing). In that case, it could also be
broken and we would need additional skip logic anyway. Just draw
a line in the sand now.
Fixes: 25f16c873f ("selftests: add openvswitch selftest suite")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/lkml/8470c431e0930d2ea204a9363a60937289b7fdbe.camel@redhat.com/
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
-----BEGIN PGP SIGNATURE-----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=LJ3q
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.6-fixes' of https://github.com/kvm-x86/linux into HEAD
KVM selftests fixes for 6.6:
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
This adds set of tests which use io_uring for rx/tx. This test suite is
implemented as separated util like 'vsock_test' and has the same set of
input arguments as 'vsock_test'. These tests only cover cases of data
transmission (no connect/bind/accept etc).
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To use this option pass '--zerocopy' parameter:
./vsock_perf --zerocopy --sender <cid> ...
With this option MSG_ZEROCOPY flag will be passed to the 'send()' call.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds three tests for MSG_ZEROCOPY feature:
1) SOCK_STREAM tx with different buffers.
2) SOCK_SEQPACKET tx with different buffers.
3) SOCK_STREAM test to read empty error queue of the socket.
Patch also works as preparation for the next patches for tools in this
patchset: vsock_perf and vsock_uring_test:
1) Adds several new functions to util.c - they will be also used by
vsock_uring_test.
2) Adds two new functions for MSG_ZEROCOPY handling to a new source
file - such source will be shared between vsock_test, vsock_perf and
vsock_uring_test, thus avoiding code copy-pasting.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure that the command values used for replies are correct. This is
only affecting generated userspace helpers, no change on kernel code.
Fixes: 7199c86247 ("netlink: specs: devlink: add commands that do per-instance dump")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231012115811.298129-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The open-coded task_vma iter added earlier in this series allows for
natural iteration over a task's vmas using existing open-coded iter
infrastructure, specifically bpf_for_each.
This patch adds a test demonstrating this pattern and validating
correctness. The vma->vm_start and vma->vm_end addresses of the first
1000 vmas are recorded and compared to /proc/PID/maps output. As
expected, both see the same vmas and addresses - with the exception of
the [vsyscall] vma - which is explained in a comment in the prog_tests
program.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231013204426.1074286-5-davemarchevsky@fb.com
Further patches in this series will add a struct bpf_iter_task_vma,
which will result in a name collision with the selftest prog renamed in
this patch. Rename the selftest to avoid the collision.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231013204426.1074286-3-davemarchevsky@fb.com
The tests rely on the IPv{4,6} FIB trace points being triggered once for
each forwarded packet. If receive processing is deferred to the
ksoftirqd task these invocations will not be counted and the tests will
fail. Fix by specifying the '-a' flag to avoid perf from filtering on
the mausezahn task.
Before:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (.68) [FAIL]
# ./fib_tests.sh -t ipv6_mpath_list
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (.27) [FAIL]
After:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
# ./fib_tests.sh -t ipv6_mpath_list
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (.99) [ OK ]
Fixes: 8ae9efb859 ("selftests: fib_tests: Add multipath list receive tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/netdev/202309191658.c00d8b8-oliver.sang@intel.com/
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Link: https://lore.kernel.org/r/20231010132113.3014691-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test relies on the fib:fib_table_lookup trace point being triggered
once for each forwarded packet. If RP filter is not disabled, the trace
point will be triggered twice for each packet (for source validation and
forwarding), potentially masking actual bugs. Fix by explicitly
disabling RP filter.
Before:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.99) [ OK ]
After:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (.99) [ OK ]
Fixes: 8ae9efb859 ("selftests: fib_tests: Add multipath list receive tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/netdev/202309191658.c00d8b8-oliver.sang@intel.com/
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Link: https://lore.kernel.org/r/20231010132113.3014691-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
resctrlfs.c contains mostly functions that interact in some way with
resctrl FS entries while functions inside resctrl_val.c deal with
measurements and benchmarking.
run_benchmark() is located in resctrlfs.c even though it's purpose
is not interacting with the resctrl FS but to execute cache checking
logic.
Move run_benchmark() to resctrl_val.c just before resctrl_val() that
makes use of run_benchmark(). Make run_benchmark() static since it's
not used between multiple files anymore.
Remove return comment from kernel-doc since the function is type void.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Writing bitmasks to the schemata can fail when the bitmask doesn't
adhere to constraints defined by what a particular CPU supports.
Some example of constraints are max length or having contiguous bits.
The driver should properly return errors when any rule concerning
bitmask format is broken.
Resctrl FS returns error codes from fprintf() only when fclose() is
called. Current error checking scheme allows invalid bitmasks to be
written into schemata file and the selftest doesn't notice because the
fclose() error code isn't checked.
Substitute fopen(), flose() and fprintf() with open(), close() and
write() to avoid error code buffering between fprintf() and fclose().
Remove newline character from the schema string after writing it to
the schemata file so it prints correctly before function return.
Pass the string generated with strerror() to the "reason" buffer so
the error message is more verbose. Extend "reason" buffer so it can hold
longer messages.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The initial value of 5% chosen for the maximum allowed percentage
difference between resctrl mbm value and IMC mbm value in
commit 06bd03a57f ("selftests/resctrl: Fix MBA/MBM results reporting
format") was "randomly chosen value" (as admitted by the changelog).
When running tests in our lab across a large number platforms, 5%
difference upper bound for success seems a bit on the low side for the
MBA and MBM tests. Some platforms produce outliers that are slightly
above that, typically 6-7%, which leads MBA/MBM test frequently
failing.
Replace the "randomly chosen value" with a success bound that is based
on those measurements across large number of platforms by relaxing the
MBA/MBM success bound to 8%. The relaxed bound removes the failures due
the frequent outliers.
Fixed commit description style error during merge:
Shuah Khan <skhan@linuxfoundation.org>
Fixes: 06bd03a57f ("selftests/resctrl: Fix MBA/MBM results reporting format")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The MBA and CMT tests expect support of other features to be able to
run.
When platform only supports MBA but not MBM, MBA test will fail with:
Failed to open total bw file: No such file or directory
When platform only supports CMT but not CAT, CMT test will fail with:
Failed to open bit mask file '/sys/fs/resctrl/info/L3/cbm_mask': No such file or directory
It leads to the test reporting test fail (even if no test was run at
all).
Extend feature checks to cover these two conditions to show these tests
were skipped rather than failed.
Fixes: ee0415681e ("selftests/resctrl: Use resctrl/info for feature detection")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Refactor feature check to use resource and feature name
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Feature check in validate_resctrl_feature_request() takes in the test
name string and maps that to what to check per test.
Pass resource and feature names to validate_resctrl_feature_request()
directly rather than deriving them from the test name inside the
function which makes the feature check easier to extend for new test
cases.
Use !! in the return statement to make the boolean conversion more
obvious even if it is not strictly necessary from correctness point of
view (to avoid it looking like the function is returning a freed
pointer).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Remove duplicate feature check from CMT test
Cc: <stable@vger.kernel.org> # selftests/resctrl: Move _GNU_SOURCE define into Makefile
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
_GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large
impact on what gets defined when including headers either before or
after it. This can result in compile failures if .c file decides to
include a standard header file before resctrl.h.
It is safer to define _GNU_SOURCE in Makefile so it is always defined
regardless of in which order includes are done.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The test runner run_cmt_test() in resctrl_tests.c checks for CMT
feature and does not run cmt_resctrl_val() if CMT is not supported.
Then cmt_resctrl_val() also check is CMT is supported.
Remove the duplicated feature check for CMT from cmt_resctrl_val().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Unmounting resctrl FS has been moved into the per test functions in
resctrl_tests.c by commit caddc0fbe4 ("selftests/resctrl: Move
resctrl FS mount/umount to higher level"). In case a signal (SIGINT,
SIGTERM, or SIGHUP) is received, the running selftest is aborted by
ctrlc_handler() which then unmounts resctrl fs before exiting. The
current section between signal_handler_register() and
signal_handler_unregister(), however, does not cover the entire
duration when resctrl FS is mounted.
Move signal_handler_register() and signal_handler_unregister() calls
from per test files into resctrl_tests.c to properly unmount resctrl
fs. In order to not add signal_handler_register()/unregister() n times,
create helpers test_prepare() and test_cleanup().
Do not call ksft_exit_fail_msg() in test_prepare() but only in the per
test function to keep the control flow cleaner without adding calls to
exit() deep into the call chain.
Adjust child process kill() call in ctrlc_handler() to only be invoked
if the child was already forked.
Fixes: caddc0fbe4 ("selftests/resctrl: Move resctrl FS mount/umount to higher level")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
signal_handler_unregister() calls sigaction() with uninitializing
sa_flags in the struct sigaction.
Make sure sa_flags is always initialized in signal_handler_unregister()
by initializing the struct sigaction when declaring it. Also add the
initialization to signal_handler_register() even if there are no know
bugs in there because correctness is then obvious from the code itself.
Fixes: 73c55fa5ab ("selftests/resctrl: Commonize the signal handler register/unregister for all tests")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Benchmark argument is handled by custom argument parsing code which is
more complicated than it needs to be.
Process benchmark argument within the normal getopt() handling and drop
unnecessary ben_ind and has_ben variables. When -b is given, terminate
the argument processing as -b consumes all remaining arguments.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ben_count is only used to write the terminator for the list. It is
enough to use i from the loop so no need for another variable.
Remove ben_count variable as it is not needed.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Benchmark command is used in multiple tests so it should not be
mutated by the tests but CMT test alters span argument. Due to the
order of tests (CMT test runs last), mutating the span argument in CMT
test does not trigger any real problems currently.
Mark benchmark_cmd strings as const and setup the benchmark command
using pointers. Because the benchmark command becomes const, the input
arguments can be used directly. Besides being simpler, using the input
arguments directly also removes the internal size restriction.
CMT test has to create a copy of the benchmark command before altering
the benchmark command.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Benchmark command is initialized before resctrl FS check and
preparation code that can call ksft_exit_skip(). There is no strong
reason why the resctrl FS support check and unmounting it (if already
mounted), has to be done after the benchmark command initialization.
Move benchmark command initialization such that it is done not until
right before the tests commence. This simplifies rollback handling when
benchmark command initialization starts to use dynamic allocation (in a
change following this).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
struct resctrl_val_param contains span member. resctrl_val(), however,
never uses it because the value of span is embedded into the default
benchmark command and parsed from it by run_benchmark().
Remove span from resctrl_val_param. Provide DEFAULT_SPAN for the code
that needs it. CMT and CAT tests communicate span that is different
from the DEFAULT_SPAN between their internal functions which is
converted into passing it directly as a parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
bw_report is always set to "reads" and bm_type is set to "fill_buf" but
is never used.
Set bw_report directly to "reads" in MBA/MBM test and remove bm_type.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Benchmark command must be the last argument because it consumes all the
remaining arguments but help misleadingly shows it as the first
argument. The benchmark command is also shown in quotes but it does not
match with the code.
Correct -b argument place in the help message and remove the quotes.
Tweak also how the options are presented by using ... notation.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Benchmark command is copied into an array in the stack. The array is
BENCHMARK_ARGS items long but the command line could try to provide a
longer command. Argument size is also fixed by BENCHMARK_ARG_SIZE (63
bytes of space after fitting the terminating \0 character) and user
could have inputted argument longer than that.
Return error in case the benchmark command does not fit to the space
allocated for it.
Fixes: ecdbb911f2 ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Compiling resctrl selftest after adding a __printf() attribute to
ksft_print_msg() exposes -Wformat warning in show_cache_info().
The format specifier used expects a variable of type int but a long
unsigned int variable is passed instead.
Change the format specifier to match the passed variable.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Compiling mm selftest after adding a __printf() attribute to
ksft_print_msg() exposes -Wformat warning in remap_region().
Fix the wrong format specifier causing the warning.
The mm selftest uses the printf attribute in its full form. Since the
header file that uses it also includes kselftests.h it can use the macro
defined there.
Use __printf() included with kselftests.h instead of the full attribute.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The __printf() macro is used in many tools in the linux kernel to
validate the format specifiers in functions that use printf. The kvm
selftest uses it without putting it in a macro definition while it
also imports the kselftests.h header where the macro attribute is
defined.
Use __printf() from kselftests.h instead of the full attribute.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Compiling sigaltstack selftest after adding a __printf() attribute to
ksft_print_msg() exposes -Wformat warning in main().
The format specifier inside ksft_print_msg() expects a long
unsigned int but the passed variable is of unsigned int type.
Fix the format specifier so it matches the passed variable.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Compiling pidfd selftest after adding a __printf() attribute to
ksft_print_msg() and ksft_test_result_pass() exposes -Wformat warnings
in error_report(), test_pidfd_poll_exec_thread(),
child_poll_exec_test(), test_pidfd_poll_leader_exit_thread(),
child_poll_leader_exit_test().
The ksft_test_result_pass() in error_report() expects a string but
doesn't provide any argument after the format string. All the other
calls to ksft_print_msg() in the functions mentioned above have format
strings that don't match with other passed arguments.
Fix format specifiers so they match the passed variables.
Add a missing variable to ksft_test_result_pass() inside
error_report() so it matches other cases in the switch statement.
Fixes: 2def297ec7 ("pidfd: add tests for NSpid info in fdinfo")
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Compiling openat2 selftest after adding a __printf() attribute to
ksft_print_msg() exposes a -Wformat warning in test_openat2_flags().
The wrong format specifier is used for printing test.how->flags
variable.
Change the format specifier to %llX so it matches the printed variable.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Compiling cachestat selftest after adding a __printf() attribute to
ksft_print_msg() exposes a -Wformat warning in print_cachestat().
The format specifier in printf() call expects long int variables and
received long long int.
Change format specifiers to long long int so they match passed
variables.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Kselftest header defines multiple variadic functions that use printf
along with other logic.
There is no format checking for the variadic functions that use
printing inside kselftest.h. Because of this the compiler won't
be able to catch instances of mismatched printf formats and debugging
tests might be more difficult.
Add the common __printf() attribute macro to kselftest.h.
Add __printf() attribute to every function using formatted printing
with variadic arguments.
Adding the attribute and compiling all selftests exposes a number of
-Wformat warnings which were previously unnoticed due to a lack of
format specifiers checking by the compiler.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
linux-rt-devel tree contains a patch (b1773eac3f29c ("sched: Add support
for lazy preemption")) that adds an extra member to struct trace_entry.
This causes the offset of args field in struct trace_event_raw_sys_enter
be different from the one in struct syscall_trace_enter:
struct trace_event_raw_sys_enter {
struct trace_entry ent; /* 0 12 */
/* XXX last struct has 3 bytes of padding */
/* XXX 4 bytes hole, try to pack */
long int id; /* 16 8 */
long unsigned int args[6]; /* 24 48 */
/* --- cacheline 1 boundary (64 bytes) was 8 bytes ago --- */
char __data[]; /* 72 0 */
/* size: 72, cachelines: 2, members: 4 */
/* sum members: 68, holes: 1, sum holes: 4 */
/* paddings: 1, sum paddings: 3 */
/* last cacheline: 8 bytes */
};
struct syscall_trace_enter {
struct trace_entry ent; /* 0 12 */
/* XXX last struct has 3 bytes of padding */
int nr; /* 12 4 */
long unsigned int args[]; /* 16 0 */
/* size: 16, cachelines: 1, members: 3 */
/* paddings: 1, sum paddings: 3 */
/* last cacheline: 16 bytes */
};
This, in turn, causes perf_event_set_bpf_prog() fail while running bpf
test_profiler testcase because max_ctx_offset is calculated based on the
former struct, while off on the latter:
10488 if (is_tracepoint || is_syscall_tp) {
10489 int off = trace_event_get_offsets(event->tp_event);
10490
10491 if (prog->aux->max_ctx_offset > off)
10492 return -EACCES;
10493 }
What bpf program is actually getting is a pointer to struct
syscall_tp_t, defined in kernel/trace/trace_syscalls.c. This patch fixes
the problem by aligning struct syscall_tp_t with struct
syscall_trace_(enter|exit) and changing the tests to use these structs
to dereference context.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20231013054219.172920-1-asavkov@redhat.com
* A handful of build fixes.
* A fix to avoid mixing up user/kernel-mode breakpoints, which can
manifest as a hang when mixing k/uprobes with other breakpoint
sources.
* A fix to avoid double-allocting crash kernel memory.
* A fix for tracefs syscall name mangling, which was causing syscalls
not to show up in tracefs.
* A fix to the perf driver to enable the hw events when selected, which
can trigger a BUG on some userspace access patterns.
-----BEGIN PGP SIGNATURE-----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=kOgc
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of build fixes
- A fix to avoid mixing up user/kernel-mode breakpoints, which can
manifest as a hang when mixing k/uprobes with other breakpoint
sources
- A fix to avoid double-allocting crash kernel memory
- A fix for tracefs syscall name mangling, which was causing syscalls
not to show up in tracefs
- A fix to the perf driver to enable the hw events when selected, which
can trigger a BUG on some userspace access patterns
* tag 'riscv-for-linus-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
drivers: perf: Fix panic in riscv SBI mmap support
riscv: Fix ftrace syscall handling which are now prefixed with __riscv_
RISC-V: Fix wrong use of CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK
riscv: kdump: fix crashkernel reserving problem on RISC-V
riscv: Remove duplicate objcopy flag
riscv: signal: fix sigaltstack frame size checking
riscv: errata: andes: Makefile: Fix randconfig build issue
riscv: Only consider swbp/ss handlers for correct privileged mode
riscv: kselftests: Fix mm build by removing testcases subdirectory
The file name used in flash test was "dummy" because at the time test
was written, drivers were responsible for file request and as netdevsim
didn't do that, name was unused. However, the file load request is
now done in devlink code and therefore the file has to exist.
Use first random file from /lib/firmware for this purpose.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the test to check flushing with bridge device, test flush by device
and by VID.
Add test case for flushing with "self" and "master" and attributes that are
supported only in one driver, this is unrecommended configuration, check it
to verify that user gets an error.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test all the supported arguments for FDB flush. The test checks
configuration, not traffic. Note that the flag 'offloaded' is not checked
as it is not relevant when there is no hardware.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c ("bpf: Fix verifier log for async callback return values")
a923819fb2 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous releases - regressions:
- af_packet: fix fortified memcpy() without flex array.
- tcp: fix crashes trying to free half-baked MTU probes
- xdp: fix zero-size allocation warning in xskq_create()
- can: sja1000: always restart the tx queue after an overrun
- eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp
- eth: nfp: avoid rmmod nfp crash issues
- eth: octeontx2-pf: fix page pool frag allocation warning
Previous releases - always broken:
- mctp: perform route lookups under a RCU read-side lock
- bpf: s390: fix clobbering the caller's backchain in the trampoline
- phy: lynx-28g: cancel the CDR check work item on the remove path
- dsa: qca8k: fix qca8k driver for Turris 1.x
- eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()
- eth: ixgbe: fix crash with empty VF macvlan list
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=orAS
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and BPF.
We have a regression in TC currently under investigation, otherwise
the things that stand off most are probably the TCP and AF_PACKET
fixes, with both issues coming from 6.5.
Previous releases - regressions:
- af_packet: fix fortified memcpy() without flex array.
- tcp: fix crashes trying to free half-baked MTU probes
- xdp: fix zero-size allocation warning in xskq_create()
- can: sja1000: always restart the tx queue after an overrun
- eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp
- eth: nfp: avoid rmmod nfp crash issues
- eth: octeontx2-pf: fix page pool frag allocation warning
Previous releases - always broken:
- mctp: perform route lookups under a RCU read-side lock
- bpf: s390: fix clobbering the caller's backchain in the trampoline
- phy: lynx-28g: cancel the CDR check work item on the remove path
- dsa: qca8k: fix qca8k driver for Turris 1.x
- eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()
- eth: ixgbe: fix crash with empty VF macvlan list"
* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
rswitch: Fix imbalance phy_power_off() calling
rswitch: Fix renesas_eth_sw_remove() implementation
octeontx2-pf: Fix page pool frag allocation warning
nfc: nci: assert requested protocol is valid
af_packet: Fix fortified memcpy() without flex array.
net: tcp: fix crashes trying to free half-baked MTU probes
net/smc: Fix pos miscalculation in statistics
nfp: flower: avoid rmmod nfp crash issues
net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
ethtool: Fix mod state of verbose no_mask bitset
net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
mctp: perform route lookups under a RCU read-side lock
net: skbuff: fix kernel-doc typos
s390/bpf: Fix unwinding past the trampoline
s390/bpf: Fix clobbering the caller's backchain in the trampoline
net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
net/smc: Fix dependency of SMC on ISM
ixgbe: fix crash with empty VF macvlan list
net/mlx5e: macsec: use update_pn flag instead of PN comparation
net: phy: mscc: macsec: reject PN update requests
...
qemu-system-ppc64 can handle both big and little endian kernels.
While some setups, like Debian, provide a symlink to execute
qemu-system-ppc64 as qemu-system-ppc64le, others, like ArchLinux, do not.
So always use qemu-system-ppc64 directly.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20231008-nolibc-qemu-ppc64-v1-1-29e2326e0420@weissschuh.net/
Acked-by: Willy Tarreau <w@1wt.eu>
