This is used in more than one places so let's factor it out in ctree.h.
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that these functions no longer require a handle to transaction to
inspect pending/pinned chunks the argument can be removed. At the same
time also remove any surrounding code which acquired the handle.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The pending chunks list contains chunks that are allocated in the
current transaction but haven't been created yet. The pinned chunks
list contains chunks that are being released in the current transaction.
Both describe chunks that are not reflected on disk as in use but are
unavailable just the same.
The pending chunks list is anchored by the transaction handle, which
means that we need to hold a reference to a transaction when working
with the list.
The way we use them is by iterating over both lists to perform
comparisons on the stripes they describe for each device. This is
backwards and requires that we keep a transaction handle open while
we're trimming.
This patchset adds an extent_io_tree to btrfs_device that maintains
the allocation state of the device. Extents are set dirty when
chunks are first allocated -- when the extent maps are added to the
mapping tree. They're cleared when last removed -- when the extent
maps are removed from the mapping tree. This matches the lifespan
of the pending and pinned chunks list and allows us to do trims
on unallocated space safely without pinning the transaction for what
may be a lengthy operation. We can also use this io tree to mark
which chunks have already been trimmed so we don't repeat the operation.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_device structs are freed from RCU context since device iteration
is protected by RCU. Currently this is achieved by using call_rcu since
no blocking functions are called within btrfs_free_device. Future
refactoring of pending/pinned chunks will require calling sleeping
functions.
This patch is in preparation for these changes by simply switching from
RCU callbacks to explicit calls of synchronize_rcu and calling
btrfs_free_device directly. This is functionally equivalent, making sure
that there are no readers at that time.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Chunks read from disk currently don't get their ->orig_block_len member
set, in contrast when a new chunk is allocated, the respective
extent_map's ->orig_block_len is assigned the size of the stripe of this
chunk.
Let's apply the same strategy for chunks which are read from
disk, not only does this codify the invariant that ->orig_block_len
always contains the size of the stripe for a chunk (when the em belongs
to the mapping tree). But it's also a preparatory patch for further work
around tracking chunk allocation in an extent tree rather than
pinned/pending lists.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During device shrink pinned/pending chunks (i.e. those which have been
deleted/created respectively, in the current transaction and haven't
touched disk) need to be accounted when doing device shrink. Presently
this happens after the main relocation loop in btrfs_shrink_device,
which could lead to making another go in the body of the function.
Since there is no hard requirement to perform pinned/pending chunks
handling after the relocation loop, move the code before it. This leads
to simplifying the code flow around - i.e. no need to use 'goto again'.
A notable side effect of this change is that modification of the
device's size requires a transaction to be started and committed before
the relocation loop starts. This is necessary to ensure that relocation
process sees the shrunk device size.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently overload the pending_chunks list to handle updating
btrfs_device->commit_bytes used. We don't actually care about the
extent mapping or even the device mapping for the chunk - we just need
the device, and we can end up processing it multiple times. The
fs_devices->resized_list does more or less the same thing, but with the
disk size. They are called consecutively during commit and have more or
less the same purpose.
We can combine the two lists into a single list that attaches to the
transaction and contains a list of devices that need updating. Since we
always add the device to a list when we change bytes_used or
disk_total_size, there's no harm in copying both values at once.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For fuzzed image whose DEV_ITEM has invalid total_bytes as 0, then
kernel will just panic:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
#PF error: [normal kernel read fault]
PGD 800000022b2bd067 P4D 800000022b2bd067 PUD 22b2bc067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 1106 Comm: mount Not tainted 5.0.0-rc8+ #9
RIP: 0010:btrfs_verify_dev_extents+0x2a5/0x5a0
Call Trace:
open_ctree+0x160d/0x2149
btrfs_mount_root+0x5b2/0x680
[CAUSE]
If device extent verification finds a deivce with 0 total_bytes, then it
assumes it's a seed dummy, then search for seed devices.
But in this case, there is no seed device at all, causing NULL pointer.
[FIX]
Since this is caused by fuzzed image, let's go the tree-check way, just
add a new verification for device item.
Reported-by: Yoon Jungyeon <jungyeon@gatech.edu>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202691
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have btrfs_check_chunk_valid() in tree-checker, let's do
chunk item verification in tree-checker too.
Since the tree-checker is run at endio time, if one chunk leaf fails
chunk verification, we can still retry the other copy, making btrfs more
robust to fuzzed image as we may still get a good chunk item.
Also since we have done chunk verification in tree block read time, skip
the btrfs_check_chunk_valid() call in read_one_chunk() if we're reading
chunk items from leaf.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
By function, chunk item verification is more suitable to be done inside
tree-checker.
So move btrfs_check_chunk_valid() to tree-checker.c and export it.
And since it's now moved to tree-checker, also add a better comment for
what this function is doing.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BUG_ON(1) leads to bogus warnings from clang when
CONFIG_PROFILE_ANNOTATED_BRANCHES is set:
fs/btrfs/volumes.c:5041:3: error: variable 'max_chunk_size' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
BUG_ON(1);
^~~~~~~~~
include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
# define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/btrfs/volumes.c:5046:9: note: uninitialized use occurs here
max_chunk_size);
^~~~~~~~~~~~~~
include/linux/kernel.h:860:36: note: expanded from macro 'min'
#define min(x, y) __careful_cmp(x, y, <)
^
include/linux/kernel.h:853:17: note: expanded from macro '__careful_cmp'
__cmp_once(x, y, __UNIQUE_ID(__x), __UNIQUE_ID(__y), op))
^
include/linux/kernel.h:847:25: note: expanded from macro '__cmp_once'
typeof(y) unique_y = (y); \
^
fs/btrfs/volumes.c:5041:3: note: remove the 'if' if its condition is always true
BUG_ON(1);
^
include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^
fs/btrfs/volumes.c:4993:20: note: initialize the variable 'max_chunk_size' to silence this warning
u64 max_chunk_size;
^
= 0
Change it to BUG() so clang can see that this code path can never
continue.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Sterba <dsterba@suse.com>
As readahead is an optimization, all errors are usually filtered out,
but still properly handled when the real read call is done. The commit
5e9d398240 ("btrfs: readpages() should submit IO as read-ahead") added
REQ_RAHEAD to readpages() because that's only used for readahead
(despite what one would expect from the callback name).
This causes a flood of messages and inflated read error stats, so skip
reporting in case it's readahead.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202403
Reported-by: LimeTech <tomm@lime-technology.com>
Fixes: 5e9d398240 ("btrfs: readpages() should submit IO as read-ahead")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: David Sterba <dsterba@suse.com>
We recently had a customer issue with a corrupted filesystem. When
trying to mount this image btrfs panicked with a division by zero in
calc_stripe_length().
The corrupt chunk had a 'num_stripes' value of 1. calc_stripe_length()
takes this value and divides it by the number of copies the RAID profile
is expected to have to calculate the amount of data stripes. As a DUP
profile is expected to have 2 copies this division resulted in 1/2 = 0.
Later then the 'data_stripes' variable is used as a divisor in the
stripe length calculation which results in a division by 0 and thus a
kernel panic.
When encountering a filesystem with a DUP block group and a
'num_stripes' value unequal to 2, refuse mounting as the image is
corrupted and will lead to unexpected behaviour.
Code inspection showed a RAID1 block group has the same issues.
Fixes: e06cd3dd7c ("Btrfs: add validadtion checks for chunk loading")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have killed volume mutex (commit: dccdb07bc9
btrfs: kill btrfs_fs_info::volume_mutex). This a trival one seems to have
escaped.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Support for a new command that can be used eg. as a command
$ btrfs device scan --forget [dev]'
(the final name may change though)
to undo the effects of 'btrfs device scan [dev]'. For this purpose
this patch proposes to use ioctl #5 as it was empty and is next to the
SCAN ioctl.
The new ioctl BTRFS_IOC_FORGET_DEV works only on the control device
(/dev/btrfs-control) to unregister one or all devices, devices that are
not mounted.
The argument is struct btrfs_ioctl_vol_args, ::name specifies the device
path. To unregister all device, the path is an empty string.
Again, the devices are removed only if they aren't part of a mounte
filesystem.
This new ioctl provides:
- release of unwanted btrfs_fs_devices and btrfs_devices structures
from memory if the device is not going to be mounted
- ability to mount filesystem in degraded mode, when one devices is
corrupted like in split brain raid1
- running test cases which would require reloading the kernel module
but this is not possible eg. due to mounted filesystem or built-in
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Both btrfs_find_device() and find_device() does the same thing except
that the latter does not take the seed device onto account in the device
scanning context. We can merge them.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preparatory patch to add ioctl that allows to forget a device (ie.
reverse of scan).
Refactors btrfs_free_stale_devices() to obtain return status. As this
function can fail if it can't find the given path (returns -ENOENT) or
trying to delete a mounted device (returns -EBUSY).
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_find_device() accepts fs_info as an argument and retrieves
fs_devices from fs_info.
Instead use fs_devices, so that this function can be used in non-mount
(during device scanning) context as well.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_find_device_by_devspec() finds the device by @devid or by
@device_path. This patch makes code flow easy to read by open coding the
else part and renames devpath to device_path.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_find_device_missing_or_by_path() is relatively small function, and
its only parent btrfs_find_device_by_devspec() is small as well. Besides
there are a number of find_device functions. Merge
btrfs_find_device_missing_or_by_path() into its parent.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
alloc_fs_devices() can return ERR_PTR(-ENOMEM), so dereferencing its
result before the check for IS_ERR() is a bad idea.
Fixes: d1a6300282 ("btrfs: add members to fs_devices to track fsid changes")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Linux v5.0-rc1 will fail fstests/btrfs/163 with the following kernel
message:
BTRFS error (device dm-6): dev extent devid 1 physical offset 13631488 len 8388608 is beyond device boundary 0
BTRFS error (device dm-6): failed to verify dev extents against chunks: -117
BTRFS error (device dm-6): open_ctree failed
[CAUSE]
Commit cf90d884b3 ("btrfs: Introduce mount time chunk <-> dev extent
mapping check") introduced strict check on dev extents.
We use btrfs_find_device() with dev uuid and fs uuid set to NULL, and
only dependent on @devid to find the real device.
For seed devices, we call clone_fs_devices() in open_seed_devices() to
allow us search seed devices directly.
However clone_fs_devices() just populates devices with devid and dev
uuid, without populating other essential members, like disk_total_bytes.
This makes any device returned by btrfs_find_device(fs_info, devid,
NULL, NULL) is just a dummy, with 0 disk_total_bytes, and any dev
extents on the seed device will not pass the device boundary check.
[FIX]
This patch will try to verify the device returned by btrfs_find_device()
and if it's a dummy then re-search in seed devices.
Fixes: cf90d884b3 ("btrfs: Introduce mount time chunk <-> dev extent mapping check")
CC: stable@vger.kernel.org # 4.19+
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The typos accumulate over time so once in a while time they get fixed in
a large patch.
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The first step of the rebalance process ensures there is 1MiB free on
each device. This number seems rather small. And in fact when talking to
the original authors their opinions were:
"man that's a little bonkers"
"i don't think we even need that code anymore"
"I think it was there to make sure we had room for the blank 1M at the
beginning. I bet it goes all the way back to v0"
"we just don't need any of that tho, i say we just delete it"
Clearly, this piece of code has lost its original intent throughout the
years. It doesn't really bring any real practical benefits to the
relocation process.
Additionally, this patch makes the balance process more lightweight by
removing a pair of shrink/grow operations which are rather expensive for
heavily populated filesystems. This is mainly due to shrink requiring
relocating block groups, involving heavy use of the btree.
The intermediate shrink/grow can fail and leave the filesystem in a
middle state that would need to be changed back by the user.
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Constructs like 'var & (PAGE_SIZE - 1)' or 'var & ~PAGE_MASK' can denote an
offset into a page.
So replace them by the offset_in_page() macro instead of open-coding it if
they're not used as an alignment check.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The dev-replace locking functions are now trivial wrappers around rw
semaphore that can be used directly everywhere. No functional change.
Signed-off-by: David Sterba <dsterba@suse.com>
After the rw semaphore has been added, the custom blocking using
::blocking_readers and ::read_lock_wq is redundant.
The blocking logic in __btrfs_map_block is replaced by extending the
time the semaphore is held, that has the same blocking effect on writes
as the previous custom scheme that waited until ::blocking_readers was
zero.
Signed-off-by: David Sterba <dsterba@suse.com>
This function really checks whether adding more data to the bio will
straddle a stripe/chunk. So first let's give it a more appropraite name
- btrfs_bio_fits_in_stripe. Secondly, the offset parameter was never
used to just remove it. Thirdly, pages are submitted to either btree or
data inodes so it's guaranteed that tree->ops is set so replace the
check with an ASSERT. Finally, document the parameters of the function.
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Print a kernel log message when the balance ends, either for cancel or
completed or if it is paused.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The information about balance arguments is important for system audit,
this patch prints the textual representation when balance starts or is
resumed.
Example command:
$ btrfs balance start -f -mprofiles=raid1,convert=single,soft -dlimit=10..20,usage=50 /btrfs
Example kernel log output:
BTRFS info (device sdb): balance: start -f -dusage=50,limit=10..20 -mconvert=single,soft,profiles=raid1 -sconvert=single,soft,profiles=raid1
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog, simplify code ]
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out helper that describes block group flags from
describe_relocation. The result will not be longer than the given size.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
The available allocation bits members from struct btrfs_fs_info are
protected by a sequence lock, and when starting balance we access them
incorrectly in two different ways:
1) In the read sequence lock loop at btrfs_balance() we use the values we
read from fs_info->avail_*_alloc_bits and we can immediately do actions
that have side effects and can not be undone (printing a message and
jumping to a label). This is wrong because a retry might be needed, so
our actions must not have side effects and must be repeatable as long
as read_seqretry() returns a non-zero value. In other words, we were
essentially ignoring the sequence lock;
2) Right below the read sequence lock loop, we were reading the values
from avail_metadata_alloc_bits and avail_data_alloc_bits without any
protection from concurrent writers, that is, reading them outside of
the read sequence lock critical section.
So fix this by making sure we only read the available allocation bits
while in a read sequence lock critical section and that what we do in the
critical section is repeatable (has nothing that can not be undone) so
that any eventual retry that is needed is handled properly.
Fixes: de98ced9e7 ("Btrfs: use seqlock to protect fs_info->avail_{data, metadata, system}_alloc_bits")
Fixes: 1450612797 ("btrfs: fix a bogus warning when converting only data or metadata")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch lands the last case which needs to be handled by the fsid
change code. Namely, this is the case where a multidisk filesystem has
already undergone at least one successful fsid change i.e all disks
have the METADATA_UUID incompat bit and power failure occurs as another
fsid change is in progress. When such an event occurs, disks could be
split in 2 groups. One of the groups will have both METADATA_UUID and
CHANGING_FSID_V2 flags set coupled with old fsid/metadata_uuid pairs.
The other group of disks will have only METADATA_UUID bit set and their
fsid will be different than the one in disks in the first group. Here
we look at the following cases:
a) A disk from the first group is scanned first, so fs_devices is
created with stale fsid/metdata_uuid. Then when a disk from the
second group is scanned it needs to first check whether there exists
such an fs_devices that has fsid_change set to true (because it was
created with a disk having the CHANGING_FSID_V2 flag), the
metadata_uuid and fsid of the fs_devices will be different (since it was
created by a disk which already has had at least 1 successful fsid change)
and finally the metadata_uuid of the fs_devices will equal that of the
currently scanned disk (because metadata_uuid never really changes).
When the correct fs_devices is found the information from the scanned
disk will replace the current one in fs_devices since the scanned disk
will have higher generation number.
b) A disk from the second group is scanned so fs_devices is created
as usual with differing fsid/metdata_uid. Then when a disk from the
first group is scanned the code detects that it has both
CHANGING_FSID_V2 and METADATA_UUID flags set and will search for
fs_devices that has differing metadata_uuid/fsid and whose
metadata_uuid is the same as that of the scanned device.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This commit continues hardening the scanning code to handle cases where
power loss could have caused disks in a multi-disk filesystem to be
in inconsistent state. Namely handle the situation that can occur when
some of the disks in multi-disk fs have completed their fsid change i.e
they have METADATA_UUID incompat flag set, have cleared the
CHANGING_FSID_V2 flag and their fsid/metadata_uuid are different. At
the same time the other half of the disks will have their
fsid/metadata_uuid unchanged and will only have CHANGING_FSID_V2 flag.
This is handled by introducing code in the scan path which:
a) Handles the case when a device with CHANGING_FSID_V2 flag is
scanned and as a result btrfs_fs_devices is created with matching
fsid/metdata_uuid. Subsequently, when a device with completed fsid
change is scanned it will detect this via the new code in find_fsid
i.e that such an fs_devices exist that fsid_change flag is set to true,
it's metadata_uuid/fsid match and the metadata_uuid of the scanned
device matches that of the fs_devices. In this case, it's important to
note that the devices which has its fsid change completed will have a
higher generation number than the device with FSID_CHANGING_V2 flag
set, so its superblock block will be used during mount. To prevent an
assertion triggering because the sb used for mounting will have
differing fsid/metadata_uuid than the ones in the fs_devices struct
also add code in device_list_add which overwrites the values in
fs_devices.
b) Alternatively we can end up with a device that completed its
fsid change be scanned first which will create the respective
btrfs_fs_devices struct with differing fsid/metadata_uuid. In this
case when a device with FSID_CHANGING_V2 flag set is scanned it will
call the newly added find_fsid_inprogress function which will return
the correct fs_devices.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to gracefully handle split-brain scenario during fsid change
(which are very unlikely, yet possible), two more pieces of information
will be necessary:
1. The highest generation number among all devices registered to a
particular btrfs_fs_devices
2. A boolean flag whether a given btrfs_fs_devices was created by a
device which had the FSID_CHANGING_V2 flag set.
This is a preparatory patch and just introduces the variables as well
as code which sets them, their actual use is going to happen in a later
patch.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_fs_info structure contains a copy of the
fsid/metadata_uuid fields. Same values are also contained in the
btrfs_fs_devices structure which fs_info has a reference to. Let's
reduce duplication by removing the fields from fs_info and always refer
to the ones in fs_devices. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This field is going to be used when the user wants to change the UUID
of the filesystem without having to rewrite all metadata blocks. This
field adds another level of indirection such that when the FSID is
changed what really happens is the current UUID (the one with which the
fs was created) is copied to the 'metadata_uuid' field in the superblock
as well as a new incompat flag is set METADATA_UUID. When the kernel
detects this flag is set it knows that the superblock in fact has 2
UUIDs:
1. Is the UUID which is user-visible, currently known as FSID.
2. Metadata UUID - this is the UUID which is stamped into all on-disk
datastructures belonging to this file system.
When the new incompat flag is present device scanning checks whether
both fsid/metadata_uuid of the scanned device match any of the
registered filesystems. When the flag is not set then both UUIDs are
equal and only the FSID is retained on disk, metadata_uuid is set only
in-memory during mount.
Additionally a new metadata_uuid field is also added to the fs_info
struct. It's initialised either with the FSID in case METADATA_UUID
incompat flag is not set or with the metdata_uuid of the superblock
otherwise.
This commit introduces the new fields as well as the new incompat flag
and switches all users of the fsid to the new logic.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor updates in comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
It's unnecessary to check map->stripes[i].dev for NULL given its value
is already set and dereferenced above the the check. No functional
changes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not that impossible to imagine that a device OR a btrfs image is
copied just by using the dd or the cp command. Which in case both the
copies of the btrfs will have the same fsid. If on the system with
automount enabled, the copied FS gets scanned.
We have a known bug in btrfs, that we let the device path be changed
after the device has been mounted. So using this loop hole the new
copied device would appears as if its mounted immediately after it's
been copied.
For example:
Initially.. /dev/mmcblk0p4 is mounted as /
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0 179:0 0 29.2G 0 disk
|-mmcblk0p4 179:4 0 4G 0 part /
|-mmcblk0p2 179:2 0 500M 0 part /boot
|-mmcblk0p3 179:3 0 256M 0 part [SWAP]
`-mmcblk0p1 179:1 0 256M 0 part /boot/efi
$ btrfs fi show
Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba
Total devices 1 FS bytes used 1.40GiB
devid 1 size 4.00GiB used 3.00GiB path /dev/mmcblk0p4
Copy mmcblk0 to sda
$ dd if=/dev/mmcblk0 of=/dev/sda
And immediately after the copy completes the change in the device
superblock is notified which the automount scans using btrfs device scan
and the new device sda becomes the mounted root device.
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 1 14.9G 0 disk
|-sda4 8:4 1 4G 0 part /
|-sda2 8:2 1 500M 0 part
|-sda3 8:3 1 256M 0 part
`-sda1 8:1 1 256M 0 part
mmcblk0 179:0 0 29.2G 0 disk
|-mmcblk0p4 179:4 0 4G 0 part
|-mmcblk0p2 179:2 0 500M 0 part /boot
|-mmcblk0p3 179:3 0 256M 0 part [SWAP]
`-mmcblk0p1 179:1 0 256M 0 part /boot/efi
$ btrfs fi show /
Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba
Total devices 1 FS bytes used 1.40GiB
devid 1 size 4.00GiB used 3.00GiB path /dev/sda4
The bug is quite nasty that you can't either unmount /dev/sda4 or
/dev/mmcblk0p4. And the problem does not get solved until you take sda
out of the system on to another system to change its fsid using the
'btrfstune -u' command.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of hardcoding exceptions for RAID5 and RAID6 in the code, use an
nparity field in raid_attr.
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: David Sterba <dsterba@suse.com>
RAID5 and RAID6 profile store one copy of the data, not 2 or 3. These
values are not yet used anywhere so there's no change.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 92e222df7b "btrfs: alloc_chunk: fix DUP stripe size handling"
fixed calculating the stripe_size for a new DUP chunk.
However, the same calculation reappears a bit later, and that one was
not changed yet. The resulting bug that is exposed is that the newly
allocated device extents ('stripes') can have a few MiB overlap with the
next thing stored after them, which is another device extent or the end
of the disk.
The scenario in which this can happen is:
* The block device for the filesystem is less than 10GiB in size.
* The amount of contiguous free unallocated disk space chosen to use for
chunk allocation is 20% of the total device size, or a few MiB more or
less.
An example:
- The filesystem device is 7880MiB (max_chunk_size gets set to 788MiB)
- There's 1578MiB unallocated raw disk space left in one contiguous
piece.
In this case stripe_size is first calculated as 789MiB, (half of
1578MiB).
Since 789MiB (stripe_size * data_stripes) > 788MiB (max_chunk_size), we
enter the if block. Now stripe_size value is immediately overwritten
while calculating an adjusted value based on max_chunk_size, which ends
up as 788MiB.
Next, the value is rounded up to a 16MiB boundary, 800MiB, which is
actually more than the value we had before. However, the last comparison
fails to detect this, because it's comparing the value with the total
amount of free space, which is about twice the size of stripe_size.
In the example above, this means that the resulting raw disk space being
allocated is 1600MiB, while only a gap of 1578MiB has been found. The
second device extent object for this DUP chunk will overlap for 22MiB
with whatever comes next.
The underlying problem here is that the stripe_size is reused all the
time for different things. So, when entering the code in the if block,
stripe_size is immediately overwritten with something else. If later we
decide we want to have the previous value back, then the logic to
compute it was copy pasted in again.
With this change, the value in stripe_size is not unnecessarily
destroyed, so the duplicated calculation is not needed any more.
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The variable num_bytes is really a way too generic name for a variable
in this function. There are a dozen other variables that hold a number
of bytes as value.
Give it a name that actually describes what it does, which is holding
the size of the chunk that we're allocating.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The variable num_bytes is used to store the chunk length of the chunk
that we're allocating. Do not reuse it for something really different in
the same function.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before btrfs_map_bio submits all stripe bios it does a number of checks
to ensure the device for every stripe is present. However, it doesn't do
a DEV_STATE_MISSING check, instead this is relegated to the lower level
btrfs_schedule_bio (in the async submission case, sync submission
doesn't check DEV_STATE_MISSING at all). Additionally
btrfs_schedule_bios does the duplicate device->bdev check which has
already been performed in btrfs_map_bio.
This patch moves the DEV_STATE_MISSING check in btrfs_map_bio and
removes the duplicate device->bdev check. Doing so ensures that no bio
cloning/submission happens for both async/sync requests in the face of
missing device. This makes the async io submission path slightly shorter
in terms of instruction count. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The Btrfs swap code is going to need it, so give it a btrfs_ prefix and
make it non-static.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A later patch will implement swap file support for Btrfs, but before we
do that, we need to make sure that the various Btrfs ioctls cannot
change a swap file.
When a swap file is active, we must make sure that the extents of the
file are not moved and that they don't become shared. That means that
the following are not safe:
- chattr +c (enable compression)
- reflink
- dedupe
- snapshot
- defrag
Don't allow those to happen on an active swap file.
Additionally, balance, resize, device remove, and device replace are
also unsafe if they affect an active swapfile. Add a red-black tree of
block groups and devices which contain an active swapfile. Relocation
checks each block group against this tree and skips it or errors out for
balance or resize, respectively. Device remove and device replace check
the tree for the device they will operate on.
Note that we don't have to worry about chattr -C (disable nocow), which
we ignore for non-empty files, because an active swapfile must be
non-empty and can't be truncated. We also don't have to worry about
autodefrag because it's only done on COW files. Truncate and fallocate
are already taken care of by the generic code. Device add doesn't do
relocation so it's not an issue, either.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add extra dev extent end check against device boundary.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enhance btrfs_verify_dev_extents() to remember previous checked dev
extents, so it can verify no dev extents can overlap.
Analysis from Hans:
"Imagine allocating a DATA|DUP chunk.
In the chunk allocator, we first set...
max_stripe_size = SZ_1G;
max_chunk_size = BTRFS_MAX_DATA_CHUNK_SIZE
... which is 10GiB.
Then...
/* we don't want a chunk larger than 10% of writeable space */
max_chunk_size = min(div_factor(fs_devices->total_rw_bytes, 1),
max_chunk_size);
Imagine we only have one 7880MiB block device in this filesystem. Now
max_chunk_size is down to 788MiB.
The next step in the code is to search for max_stripe_size * dev_stripes
amount of free space on the device, which is in our example 1GiB * 2 =
2GiB. Imagine the device has exactly 1578MiB free in one contiguous
piece. This amount of bytes will be put in devices_info[ndevs - 1].max_avail
Next we recalculate the stripe_size (which is actually the device extent
length), based on the actual maximum amount of available raw disk space:
stripe_size = div_u64(devices_info[ndevs - 1].max_avail, dev_stripes);
stripe_size is now 789MiB
Next we do...
data_stripes = num_stripes / ncopies
...where data_stripes ends up as 1, because num_stripes is 2 (the amount
of device extents we're going to have), and DUP has ncopies 2.
Next there's a check...
if (stripe_size * data_stripes > max_chunk_size)
...which matches because 789MiB * 1 > 788MiB.
We go into the if code, and next is...
stripe_size = div_u64(max_chunk_size, data_stripes);
...which resets stripe_size to max_chunk_size: 788MiB
Next is a fun one...
/* bump the answer up to a 16MB boundary */
stripe_size = round_up(stripe_size, SZ_16M);
...which changes stripe_size from 788MiB to 800MiB.
We're not done changing stripe_size yet...
/* But don't go higher than the limits we found while searching
* for free extents
*/
stripe_size = min(devices_info[ndevs - 1].max_avail,
stripe_size);
This is bad. max_avail is twice the stripe_size (we need to fit 2 device
extents on the same device for DUP).
The result here is that 800MiB < 1578MiB, so it's unchanged. However,
the resulting DUP chunk will need 1600MiB disk space, which isn't there,
and the second dev_extent might extend into the next thing (next
dev_extent? end of device?) for 22MiB.
The last shown line of code relies on a situation where there's twice
the value of stripe_size present as value for the variable stripe_size
when it's DUP. This was actually the case before commit 92e222df7b
"btrfs: alloc_chunk: fix DUP stripe size handling", from which I quote:
"[...] in the meantime there's a check to see if the stripe_size does
not exceed max_chunk_size. Since during this check stripe_size is twice
the amount as intended, the check will reduce the stripe_size to
max_chunk_size if the actual correct to be used stripe_size is more than
half the amount of max_chunk_size."
In the previous version of the code, the 16MiB alignment (why is this
done, by the way?) would result in a 50% chance that it would actually
do an 8MiB alignment for the individual dev_extents, since it was
operating on double the size. Does this matter?
Does it matter that stripe_size can be set to anything which is not
16MiB aligned because of the amount of remaining available disk space
which is just taken?
What is the main purpose of this round_up?
The most straightforward thing to do seems something like...
stripe_size = min(
div_u64(devices_info[ndevs - 1].max_avail, dev_stripes),
stripe_size
)
..just putting half of the max_avail into stripe_size."
Link: https://lore.kernel.org/linux-btrfs/b3461a38-e5f8-f41d-c67c-2efac8129054@mendix.com/
Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ add analysis from report ]
Signed-off-by: David Sterba <dsterba@suse.com>
There's a single caller and the function name does not say it's actually
taking the lock, so open coding makes it more explicit.
For now, btrfs_dev_replace_read_lock is used instead of read_lock so
it's paired with the unlocking wrapper in the same block.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov