Commit graph

159 commits

Author SHA1 Message Date
Samuel Ortiz
e3a6b14ced NFC: mei: Do not disable MEI devices from their remove routine
Enabling and disabling device is exclusively handled by the mei_phy_ops.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-21 10:48:41 +02:00
Samuel Ortiz
73f3adb9b9 NFC: mei_phy: Register event callback when enabling the device
The callback registration starts a waiting read, so it needs to be fired
everytime the device is enabled. Otherwise following writes will never get
an answer back.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-21 10:48:40 +02:00
Samuel Ortiz
d999e4db0a NFC: mei_phy depends on INTEL_MEI
INTEL_MEI_BUS_NFC never made it upstream, so make it depend on INTEL_MEI.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-21 10:48:40 +02:00
Samuel Ortiz
bb03dceb83 NFC: pn544: Add MEI physical layer
With the new mei_phy NFC driver API, the pn544 MEI physical layer is
minimal and similar to the microread one.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-16 00:39:41 +02:00
Eric Lapuyade
4912e2fe74 NFC: mei: Add a common mei bus API for NFC drivers
This isolates the common code that is required to use an mei bus nfc
device from an NFC HCI drivers. This prepares for future drivers for
NFC chips connected behind an Intel Management Engine controller.
The microread_mei HCI driver is also modified to use that common code.

Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-16 00:39:31 +02:00
Samuel Ortiz
60d9edd50b NFC: pn533: Turn radio on and off when bringing the device up and down
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:11 +02:00
Marina Makienko
7c5a54fb86 NFC: pn533: Add missing usb_put_dev
Add missing usb_put_dev on failure path in pn533_probe().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Marina Makienko <makienko@ispras.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:10 +02:00
Waldemar Rymarkiewicz
495af72e14 NFC: pn533: Increase version number
Major features added in 0.2 version:

* frame ops added to support wider set of devices
* support of ACS ACR122U

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:08 +02:00
Waldemar Rymarkiewicz
96aac226a4 NFC: pn533: Remove unused pn533_cmd_complete_t
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:08 +02:00
Waldemar Rymarkiewicz
10cff29af6 NFC: pn533: Add pn533_abort_cmd procedure
pn533_abort_cmd() aborts last command sent to the controller
and cancels already requested urb.

As ACR122U does not support any mechanism (as ACK for standard
PN533) which aborts last command this cannot be issued for this
device. Otherwise, acr122u will behave in an unstable way.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:07 +02:00
Waldemar Rymarkiewicz
53cf48399a NFC: pn533: Add support for ACS ACR122U reader
ACS ACR122U is an USB NFC reader, PC/SC and CCID compilant, based
on NXP PN532 chip.

Internally, it's build of MCU, PN532 and an antenna. MCU makes the
device CCID and PC/SC compilant and provide USB connection.

In this achitecture, a host cannot talk directly to PN532 and must
rely on MCU. Luckily, MCU exposes pseud-APDU through PC/SC Escape
mechanism which let the host to transmit standard PN532 commands
directly to PN532 chip with some limitations.

The frame roughly looks like:

    CCID header    |          APDU header           |    PN532 header
(pc_to_rdr_escape) |  (pseudo apdu Direct Tramsmit) | (len, TFI, cmd, params)

Accordign to limitations, ACR122U does't provide any mechanism to
abort last issued command.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:07 +02:00
Waldemar Rymarkiewicz
58520373d8 NFC: pn533: Add protocol type for frame ops
As not all devices require ACK confirmation of every request sent to the
controller, differentiate two protocol types.

First one, request-ack-response and the second one request-response type.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:06 +02:00
Waldemar Rymarkiewicz
f87bc9fb62 NFC: pn533: Move wq_in_error to cmd context
Rename 'wq_in_error' field to more relevant 'status'
and move it to cmd context struct.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:06 +02:00
Waldemar Rymarkiewicz
d5590bba37 NFC: pn533: Re-group fields in struct pn533
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:05 +02:00
Waldemar Rymarkiewicz
c79490e1b5 NFC: pn533: Avoid function declarations
Reorder code to avoid functions declaration.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:05 +02:00
Waldemar Rymarkiewicz
ddf19d206f NFC: pn533: Simplify __pn533_send_frame_async
In all cases (send_cmd_async, send_data_async and send_sync)
pn533_send_async_complete() handles all responses internally,
so there is no need to pass this as a callback.

Cmd context is passed to __pn533_send_frame_async in all the
cases as well. It's already kept in struct pn533 which is
available all the time the device is attached. So we can make
use of it instead.

Therefore, cmd_complete and cmd_complete_arg are no needed any more.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:04 +02:00
Waldemar Rymarkiewicz
140ef7f6b0 NFC: pn533: Fix incorrect kfree of complete args
We must free 'cmd_complete_mi_arg' and not 'cmd_complete_arg'
when getting send error handling fragmented response.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:04 +02:00
Waldemar Rymarkiewicz
4b2a953276 NFC: pn533: Remove redundant cmd_ prefix in the struct
'cmd->code' looks better then 'cmd->cmd_code'

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:03 +02:00
Waldemar Rymarkiewicz
2c206fb7fe NFC: pn533: Keep cmd context in pn533 struct
Keep cmd context in pn533 struct instead of only cmd code.
The context already includes cmd_code.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:03 +02:00
Waldemar Rymarkiewicz
4231604b3e NFC: pn533: Optimise issued cmd context tracking
Use struct pn533_cmd instead of pn533_send_async_complete_arg
to track the context of the issued cmd.

This way pn533_send_async_complete_arg struct is no needed
anymore. Just move issuer complete callback to pn533_cmd struct.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:02 +02:00
Waldemar Rymarkiewicz
0ce1fbdd60 NFC: pn533: Fix memleak while scheduling next cmd
In case of error from __pn533_send_frame_async() while sending
next cmd from the queue (cmd_wq), cmd->req, cmd->resp and
cmd->arg pointers won't be freed.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:02 +02:00
Waldemar Rymarkiewicz
f75c291361 NFC: pn533: Rename pn533_fw_reset appropriately
Define explicitely it is Pasori specific reset command.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:01 +02:00
Waldemar Rymarkiewicz
e70b96e95b NFC: pn533: Update copyrights note
Remove duplicated authors info from the header as well.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:01 +02:00
Waldemar Rymarkiewicz
95cb9e1023 NFC: pn533: Fix div by zero while stopping polling
Depends on timing division by zero can happen when user stops
polling.

pn533_stop_poll() resets modulation counter on stop_poll, but
meanwhile we get response for last poll request and try, despite
of stop poll request, to schedule next modulation for polling.

Log message:
[345.922515] pn533 1-1.3:1.0: pn533_stop_poll
[345.928314] pn533 1-1.3:1.0: pn533_send_ack
[345.932769] pn533 1-1.3:1.0: Received a frame.
[345.937438] PN533 RX: 00 00 ff 03 fd d5 4b 00 e0 00
[345.942840] pn533 1-1.3:1.0: pn533_poll_complete
[345.947753] pn533 1-1.3:1.0: pn533_start_poll_complete
[345.953186] Division by zero in kernel.
[345.957244] [<c001b38c>] (unwind_backtrace+0x0/0xf0)
[345.965698] [<c0260e78>] (Ldiv0+0x8/0x10)
[345.974060] [<c0260e60>] (__aeabi_idivmod+0x8/0x18)
[345.983978] [<c02e0064>] (pn533_poll_complete+0x3c0/0x500)
[345.994903] [<c02df690>] (pn533_send_async_complete+0x7c/0xc0)
[346.005828] [<c02e028c>] (pn533_wq_cmd_complete+0x1c/0x34)
[346.016113] [<c005d134>] (process_one_work+0x1ac/0x57c)
[346.025848] [<c005d85c>] (worker_thread+0x168/0x42c)
[346.034576] [<c00620c0>] (kthread+0xa4/0xb0)

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:00 +02:00
Waldemar Rymarkiewicz
a45e1c8d17 NFC: pn533: Print out response status bits in hex
For better debugging as the codes are defined in hex in the spec.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:00 +02:00
Waldemar Rymarkiewicz
63123108f4 NFC: pn533: Reword all std frame logic funct
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:29:00 +02:00
Samuel Ortiz
e279f84f30 NFC: pn533: Use dynamic debug for pn533 hex dumps
Those can be very verbose and we only want them when debugging pn533.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11 16:28:56 +02:00
Samuel Ortiz
9593b0b117 NFC: microread: Fix build failure due to a new MEI bus API
uuid device_id field is removed and mei_device is renamed mei_cl_device.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-01 00:52:42 +02:00
John W. Linville
98d5fac233 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	drivers/net/wireless/iwlwifi/dvm/tx.c
	drivers/net/wireless/ti/wlcore/sdio.c
	drivers/net/wireless/ti/wlcore/spi.c
2013-02-18 13:47:13 -05:00
Samuel Ortiz
cd48d8ba14 NFC: microread: Fix mei physical layer
The MEI bus API changed according to the latest comments from the char-misc
maintainers, and this patch fixes the microread mei physical layer code
according to those changes:
We pass the MEI id back to the probe routine, and the mei_driver takes a
table of MEI ids instead of one static id.
Also, mei_bus_driver got renamed to mei_driver, mei_bus_client to
mei_device, and mei_bus_set/get_clientdata to mei_set/get_clientdata.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-11 18:35:36 +01:00
Thierry Escande
52f2eaeec1 NFC: pn533: Fix target polling mode
Remove unneeded bitwise OR operator on uninitialized sk_buff data

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-08 12:18:48 +01:00
Samuel Ortiz
e0af11fa0d NFC: microread: Add MEI physical layer
On some peculiar worlds, microreads are found hidden behind MEIs and needs
to be accessed through the ME bus.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-08 12:18:32 +01:00
Samuel Ortiz
71054c7db1 NFC: microread: Add i2c physical layer
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-03 20:37:48 +01:00
Eric Lapuyade
cfad1ba871 NFC: Initial support for Inside Secure microread
Inside Secure microread is an HCI based NFC chipset.
This initial support includes reader and p2p (Target and initiator) modes.

Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-03 20:37:42 +01:00
Waldemar Rymarkiewicz
2323e6fc62 nfc: pn533: Remove unreachable code
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-29 18:06:12 +01:00
Waldemar Rymarkiewicz
ef3d56e189 nfc: pn533: Use static poll_mod and std_frame_ops
These variables are not exported.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-29 18:06:12 +01:00
John W. Linville
4205e6ef4e Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2013-01-28 14:43:00 -05:00
Thierry Escande
858ce02209 NFC: pn533: Fix bad allocation size
Use dereferenced pointer in sizeof instead of pointer itself.

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-13 23:22:09 +01:00
Waldemar Rymarkiewicz
8a0ecfe74b NFC: pn533: Fix missing parenthesis
This is a quite critical patch as it fixes potential reference to
undefined general_bytes which were never set correctly on target
activation due to missing parenthesis.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:55 +01:00
Samuel Ortiz
390a1bd853 NFC: Initial Secure Element API
Each NFC adapter can have several links to different secure elements and
that property needs to be exported by the drivers.
A secure element link can be enabled and disabled, and card emulation will
be handled by the currently active one. Otherwise card emulation will be
host implemented.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:54 +01:00
Samuel Ortiz
a0f36536ac NFC: pn544: Use devm_kzalloc API
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:53 +01:00
Samuel Ortiz
234d4d6b10 NFC: pn544: Use module_i2c_driver
The pn544 init routine does nothing but adding the driver to the i2c bus.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:52 +01:00
Samuel Ortiz
aa74103071 NFC: pn544: Separate the core code and the i2c one into different modules
As we may need to support other physical layers, we can avoid linking the
core part into each and every pn544 module.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:52 +01:00
Eric Lapuyade
bf71ab8ba5 NFC: Add HCI quirks to support driver (non)standard implementations
Some chips diverge from the HCI spec in their implementation of standard
features. This adds a new quirks parameter to
nfc_hci_allocate_device() to let the driver indicate its divergence.

Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:51 +01:00
Eric Lapuyade
924d4a023e NFC: Fixed skb leak in tm_send() nfc and hci ops implementations
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:50 +01:00
Eric Lapuyade
40d06d3647 NFC: Changed event_received hci ops result semantic
Some chips use a standard HCI event code, destined to a proprietary
gate, with a different meaning. Therefore, the HCI driver must always
have a chance to intercept the event before standard processing is
attempted.
The new semantic specifies that the result value "1" means that the
driver doesn't especially handle the event. result <= 0 means it was
handled.

Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:49 +01:00
Eric Lapuyade
27c31191b3 NFC: Added error handling in event_received hci ops
There is no use to return an error if the caller doesn't get it.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:49 +01:00
Julia Lawall
5f4d6214ef NFC: nfcwilink: Use devm_kzalloc
devm_kzalloc allocates memory that is released when a driver detaches.
This patch uses devm_kzalloc for data that is allocated in the probe
function of a platform device and is only freed in the remove function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:47 +01:00
Waldemar Rymarkiewicz
9e2d493e74 NFC: pn533: Introduce ops for frame logic
Encapsulate whole frame logic (tx/rx frame structure and size) inside
the ops structure to make the core driver generic for devices which
handle frames in non standard menner (different then pn533 spec say).

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:46 +01:00
Waldemar Rymarkiewicz
16f7541914 NFC: pn533: Remove unused dev->wq_in_frame
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10 00:51:46 +01:00